Nucleotide binding by membrane components of bacterial periplasmic binding protein-dependent transport systems.

Bacterial periplasmic binding protein-dependent transport systems require the function of a specific substrate-binding protein, located in the periplasm, and several membrane-bound components. We present evidence for a nucleotide-binding site on one of the membrane components from each of three independent transport systems, the hisP, malK and oppD proteins of the histidine, maltose and oligopeptide permeases, respectively. The amino acid sequence of the oppD protein has been determined and this protein is shown to share extensive homology with the hisP and malK proteins. Three lines of evidence lead us to propose the existence of a nucleotide-binding site on each of these proteins. A consensus nucleotide-binding sequence can be identified in the same relative position in each of the three proteins. The oppD protein binds to a Cibacron Blue affinity column and can be eluted by ATP but not by CTP or NADH. The oppD protein is labelled specifically by the nucleotide affinity analogue 5'-p-fluorosulphonylbenzoyladenosine. The identification of a nucleotide-binding site provides strong evidence that transport by periplasmic binding protein-dependent systems is energized directly by the hydrolysis of ATP or a closely related nucleotide. The hisP, malK and oppD proteins are thus responsible for energy-coupling to their respective transport systems.     

High-affinity L-arabinose transport operon. Nucleotide sequence and analysis of gene products

The nucleotide sequence of the "high-affinity" L-arabinose transport operon has been determined 3' from the regulatory region and found to contain three open reading frames designated araF, araG and araH. The first gene 3' to the regulatory region, araF, encodes the 23-residue signal peptide and the 306-residue mature form of the L-arabinose binding protein (33,200 Mr). The binding protein, which has been described elsewhere, is hydrophilic, soluble and found in the periplasm of Escherichia coli. This gene is followed by an intragenic space of 72 nucleotides, which contains a region of dyad symmetry 23 nucleotides long capable of forming an 11-member stem-loop. The second gene, designated araG, contains an open reading frame capable of encoding an equally hydrophilic protein containing 504 residues (55,000 Mr). Following a 14-nucleotide spacer, which does not appear to have any secondary structure, the third open reading frame, herein designated araH, is capable of encoding a hydrophobic protein containing 329 residues (34,000 Mr) that can only be envisioned as having an integral membrane location. 3' to araH there is a T-rich region containing a 24-nucleotide area of dyad symmetry centered 55 nucleotides from the termination codon. Analysis of the derived primary sequences of the araG and araH products indicates the nature and potential features of these components. The araG protein was found to possess internal homology between its amino and carboxyl-terminal halves, suggesting a common origin. The araG gene product has been shown to be homologous to the rbsA gene product, the hisP product, the ptsB product and the malK product, all of which presumably play similar roles in their respective transport systems. Putative ATP binding sites are observed within the regions of homology. The araH gene product has been shown to be homologous to the rbsC gene product, which is the first observed homology between two purported membrane proteins.     

Identification of the malK gene product. A peripheral membrane component of the Escherichia coli maltose transport system

The malK gene product of Escherichia coli has been identified through the use of a previously described technique that employs gene fusions (Shuman, H. A., Silhavy, T. J., and Beckwith, J. R. (1980) J. Biol. Chem. 255, 168-174). This protein, along with the four other products of the malB locus, comprise the complete maltose transport system. The malK protein has a molecular weight of approximately 40,000 and is located in the cell envelope. In mutant strains which lack another component of the transport system, the malG protein, the malK protein is located in the cytoplasm. This alteration in location suggests that the malK protein is associated with the inner surface of the cytoplasmic membrane via an interaction with the malG protein.     

A chimeric nucleotide-binding protein, encoded by a hisP–malK hybrid gene, is functional in maltose transport in Salmonella typhimurium

We have isolated a hybrid gene, composed of the first 455 nucleotides of hisP and nucleotides 275-1107 of malK, the genes coding for the nucleotide-binding components of the high-affinity transport systems for histidine and maltose in Salmonella typhimurium, respectively. The fusion had occurred by recombination within 11 homologous base pairs located between the two DNA fragments. In the chimeric protein peptidic motifs A and B, proposed to be part of the nucleotide-binding fold, originate from HisP and MalK, respectively. Plasmid pES42-39, harbouring the hybrid gene, was shown to complement only a malK mutation but failed to complement a hisP deletion mutation. The chimeric protein was identified by immunoblotting as a protein with an apparent molecular mass of 49kDa. Removal of the C-terminal 77 amino acid residues from the chimeric protein resulted in the loss of function in transport. In contrast, 51 amino acid residues could be removed from the C-terminus of wild-type MalK without any effect. Upon overproduction the chimeric protein, as wild-type MalK, inhibited expression of the malB regulon. However, both truncated proteins, when overproduced, did not exhibit this activity. Based on these results, a tentative model of the functional domains of MalK is presented.     

Definition of IgG- and albumin-binding regions of streptococcal protein G

Protein G, the immunoglobin G-binding surface protein of group C and G streptococci, also binds serum albumin. The albumin-binding site on protein G is distinct from the immunoglobulin G-binding site. By mild acid hydrolysis of the papain-liberated protein G fragment (35 kDa), a 28-kDa fragment was produced which retained full immunoglobulin G-binding activity (determined by Scatchard plotting) but had lost all albumin-binding capacity. A protein G (65 kDa), isolated after cloning and expression of the protein G gene in Escherichia coli, had comparable affinity to immunoglobulin G (5-10 X 10(10)M-1), but much higher affinity to albumin than the 35- and 28-kDa protein G fragments (31, 2.6, and 0 X 10(9)M-1, respectively). The amino-terminal amino acid sequences of the 65-, 35-, and 28-kDa fragments allowed us to exactly locate the three fragments in an overall sequence map of protein G, based on the partial gene sequences published by Guss et al. (Guss, B., Eliasson, M., Olsson, A., Uhlen, M., Frej, A.-K., J?rnvall, H., Flock, J.-I., and Lindberg, M. (1986) EMBO J. 5, 1567-1575) and Fahnestock et al. (Fahnestock, S. R., Alexander, P., Nagle, J., and Filpula, D. (1986) J. Bacteriol. 167, 870-880). In this map could then be deduced the location of three homologous albumin-binding regions and three homologous immunoglobulin G-binding regions.     

Saccharomyces cerevisiae STE6 gene product: a novel pathway for protein export in eukaryotic cells.

Saccharomyces cerevisiae MATa cells release a lipopeptide mating pheromone, a-factor. Radiolabeling and immunoprecipitation show that MATa ste6 mutants produce pro-a-factor and mature a-factor intracellularly, but little or no extracellular pheromone. Normal MATa cells carrying a multicopy plasmid containing both MFa1 (pro-a-factor structural gene) and the STE6 gene secrete a-factor at least five times faster than the same cells carrying only MFa1 in the same vector. The nucleotide sequence of the STE6 gene predicts a 1290 residue polypeptide with multiple membrane spanning segments and two hydrophilic domains, each strikingly homologous to a set of well-characterized prokaryotic permeases (including hlyB, oppD, hisP, malK and pstB) and sharing even greater identity with mammalian mdr (multiple drug resistance) transporters. These results suggest that the STE6 protein in yeast, and possibly mdr in animals, is a transmembrane translocator that exports polypeptides by a route independent of the classical secretory pathway.     

Membrane binding characteristics of two forms of transforming growth factor-beta

Cartilage-inducing factors A and B (CIF-A and CIF-B) from bovine bone have recently been identified as transforming growth factor-beta (TGF-beta) (Seyedin, S.M., Thompson, A. Y., Bentz, H., Rosen, D. M., McPherson, J. M., Conti, A., Siegel, N. R., Galluppi, G. R., and Piez, K. A. (1986) J. Biol. Chem., 261, 5693-5695) and a unique protein homologous to TGF-beta (Seyedin S. M., Segarini, P. R., Rosen, D. M., Thompson, A. Y., Bentz, H., and Graycar, J. (1987) J. Biol. Chem., 262, 1946-1949), respectively. Although the biological activities of TGF-beta and CIF-B are similar, the divergence of CIF-B from the highly conserved amino acid sequence of TGF-beta prompted an investigation of its receptor binding properties. Three classes of cell surface binding components were identified. Class A has exclusive affinity for TGF-beta; class B has greater affinity for CIF-B; and class C has equal affinity for both proteins. A high molecular weight component, the predominant binding species, was further characterized and shown to consist of two components that are either class B or class C. The differential binding properties of TGF-beta and CIF-B to cell surface components suggest that there are biological activities unique to each of the proteins.     

Sequence of the malK gene in E.coli K12.

We present the sequence of gene malK which encodes a component of the system for maltose transport in E.coli K12. We also determined the position of deletion (S50) which fuses malK to the following gene lamB; the malK-lamB protein hybrid contains all of the malK protein. The mRNA corresponding to the last two thirds of gene malK could form stable stem and loop structures. The malK protein, as deduced from the gene sequence, would include 370 residues and correspond to a molecular weight of 40700. The sequence as well as sequence comparisons with the ndh protein of E.coli are discussed in terms of the location and function of the malK protein.     

Rate of chase-promoted hydrolysis of ATP in the high affinity catalytic site of beef heart mitochondrial ATPase

Incubation of [gamma-32P]ATP with a molar excess of the soluble, homogeneous ATPase from beef heart mitochondria (F1) results in binding of substrate primarily in a single, very high affinity (KA = 10(12) M-1) catalytic site and in a slow rate of hydrolysis characteristic of single site catalysis. Subsequent addition of millimolar concentrations of nonradioactive ATP as a cold chase, sufficient to fill catalytic sites on the enzyme, results in an acceleration of hydrolysis of bound radioactive ATP of as much as 10(6)-fold, that is, to Vmax rates (Cross, R.L., Grubmeyer, C., and Penefsky, H.S. (1982) J. Biol. Chem. 257, 12101-12105). For this reason, it was proposed that the high affinity catalytic site is a normal catalytic site on the molecule. Recently, Bullough et al. (Bullough, D.A., Verburg, J.G., Yoshida, M., and Allison, W.A. (1987) J. Biol. Chem. 262, 11675-11683) reported that when 5 to 20 microM concentrations of nonradioactive ATP were added as a cold chase to an enzyme-substrate complex consisting of F1 and ATP bound to the high affinity catalytic site, hydrolysis of the chase was commensurate with the turnover rate of the enzyme, whereas the hydrolysis of bound ATP was considerably slower. These authors suggested that the high affinity catalytic site on F1 is not a normal catalytic site. This paper shows, in experiments with a rapid mixing-chemical quench apparatus, that hydrolysis of ATP bound in the high affinity catalytic site is accelerated to Vmax rates following addition of 5 microM ATP as a cold chase. Hydrolysis of bound ATP appears to precede that of the chase. The weight of the available evidence continues to support the original suggestion that the high affinity catalytic site of beef heart F1 is a normal catalytic site.     

ATP binding to the first nucleotide binding domain of multidrug resistance-associated protein plays a regulatory role at low nucleotide concentration,whereas ATP hydrolysis at the second plays a dominant role in ATP-dependent leukotriene C4 transport

Multidrug resistance-associated protein (MRP1) transports solutes in an ATP dependent manner by utilizing its two nonequivalent nucleotide binding domains (NBDs) to bind and hydrolyze ATP. The two NBDs possess different properties (Gao, M., Cui, H. R., Loe, D. W., Grant, C. E., Almquist, K. C., Cole, S. P., and Deeley, R. G. (2000) J. Biol. Chem. 275, 13098-13108; Hou, Y., Cui, L., Riordan, J. R., and Chang, X. (2000) J. Biol. Chem. 275, 20280-20287) and may play different roles during solute transport. We now report that NBD1 has moderately higher affinity for ATP than NBD2. The consequence of this difference is that the overall Kd value for wild-type MRP1 is mainly determined by ATP binding at NBD1. This conclusion is supported by the following: 1) mutation of the cysteine residue at 682 to alanine (C682A) in Walker A motif in NBD1 decreases the Kd value, indicating increased affinity for ATP; 2) mutation of the alanine residue at 1331 to cysteine (A1331C) in the Walker A motif of NBD2 does not have an effect on the Kd value; and 3) photolabeling of the protein with a cysteine residue in the Walker A motif of NBD1 is much more sensitive to N-ethylmaleimide modification than the protein with a cysteine residue in the Walker A motif of NBD2. In contrast, the Km for ATP in support of LTC4 transport is mainly determined by ATP hydrolysis at NBD2. This conclusion is supported by the following: 1) although mutation of A1331C does not have an effect on the Kd value, the Km values measured from LTC4 transport by proteins with this mutation in NBD2 are much higher than the proteins with wild-type NBD2, implying that the A1331C mutation affects ATP binding/hydrolysis at NBD2; and 2) ATP-dependent LTC4 transport by the protein with a cysteine residue in the Walker A motif of NBD2 is much more sensitive to N-ethylmaleimide modification than the protein with a cysteine residue in the Walker A motif of NBD1. Our previous results indicated that ATP binding at NBD1 at low concentration enhanced ATP binding/hydrolysis at NBD2. All of these results support the notion that ATP binding at NBD1 at low concentration plays a more important regulatory role than the binding at high ATP concentration and that ATP hydrolysis at NBD2 plays a dominant role in the ATP-dependent LTC4 transport.     

Functional reconstitution of a maltose ATP-binding cassette transporter from the thermoacidophilic gram-positive bacterium Alicyclobacillus acidocaldarius

The thermoacidophilic gram-positive bacterium Alicyclobacillus acidocaldarius grows at 60 degrees C and pH 2-3. The organism can utilize maltose and maltodextrins as energy source that are taken up by an ATP-binding cassette (ABC) import system. Genes encoding a maltose binding protein, MalE, and two membrane-integral subunits, MalF and MalG, are clustered on the chromosome but a malK gene translating into a cognate ATPase subunit is lacking. Here we report the cloning of malK from genomic DNA by using the msiK gene of Streptomyces lividans as a probe. Purified MalK exhibited a spontaneous ATPase activity with a Vmax of 0.13 micromol Pi/min/mg and a Km of 330 microM that was optimal at the growth temperature of the organism. Coexpression of malK, malF and malG in Escherichia coli resulted in the formation of a complex that could be coeluted from an affinity matrix after solubilization of membranes with dodecylmaltoside. Proteoliposomes prepared from the MalFGK complex and preformed phospholipid vesicles of A. acidocaldarius displayed a low intrinsic ATPase activity that was stimulated sevenfold by maltose-loaded MalE, thereby indicating coupling of ATP hydrolysis to substrate translocation. These results provide evidence for MalK being the physiological ATPase subunit of the A. acidocaldarius maltose transporter. Moreover, to our knowledge, this is the first report on the functional reconstitution of an ABC transport system from a thermophilic microorganism.     

Fungal ammonia fermentation, a novel metabolic mechanism that couples the dissimilatory and assimilatory pathways of both nitrate and ethanol. Role of acetyl CoA synthetase in anaerobic ATP synthesis

Fungal ammonia fermentation is a novel dissimilatory metabolic mechanism that supplies energy under anoxic conditions. The fungus Fusarium oxysporum reduces nitrate to ammonium and simultaneously oxidizes ethanol to acetate to generate ATP (Zhou, Z., Takaya, N., Nakamura, A., Yamaguchi, M., Takeo, K., and Shoun, H. (2002) J. Biol. Chem. 277, 1892-1896). We identified the Aspergillus nidulans genes involved in ammonia fermentation by analyzing fungal mutants. The results showed that assimilatory nitrate and nitrite reductases (the gene products of niaD and niiA) were essential for reducing nitrate and for anaerobic cell growth during ammonia fermentation. We also found that ethanol oxidation is coupled with nitrate reduction and catalyzed by alcohol dehydrogenase, coenzyme A (CoA)-acylating aldehyde dehydrogenase, and acetyl-CoA synthetase (Acs). This is similar to the mechanism suggested in F. oxysporum except A. nidulans uses Acs to produce ATP instead of the ADP-dependent acetate kinase of F. oxysporum. The production of Acs requires a functional facA gene that encodes Acs and that is involved in ethanol assimilation and other metabolic processes. We purified the gene product of facA (FacA) from the fungus to show that the fungus acetylates FacA on its lysine residue(s) specifically under conditions of ammonia fermentation to regulate its substrate affinity. Acetylated FacA had higher affinity for acetyl-CoA than for acetate, whereas non-acetylated FacA had more affinity for acetate. Thus, the acetylated variant of the FacA protein is responsible for ATP synthesis during fungal ammonia fermentation. These results showed that the fungus ferments ammonium via coupled dissimilatory and assimilatory mechanisms.     

Sequence of the chicken delta 2 crystallin gene and its intergenic spacer. Extreme homology with the delta 1 crystallin gene

The chicken delta-crystallin locus consists of 2 nonallelic, tandemly arranged genes (5'-delta 1-delta 2-3'). Only the delta 1 gene is known to be expressed. The nucleotide sequence for the delta 1 gene has been reported recently (Nickerson, J.M., Wawrousek, E.F., Hawkins, J.W., Wakil, A.S., Wistow, G.J., Thomas, G., Norman, B.L., and Piatigorsky, J. (1985) J. Biol. Chem. 260, 9100-9105; Ohno, M., Sakamoto, H., Yasuda, K., Okada, T.S., and Shimura, Y. (1985) Nucleic Acids Res. 13, 1593-1606). We now report the sequence for the delta 2 gene and the 4-kilobase intergenic spacer between the two delta-crystallin genes. The delta 2 gene, like the delta 1 gene, has 17 exons and 16 introns. The homologous exons are remarkably similar: exons 3-17 are identical in size between delta 1 and delta 2, and the sequence homology ranges from 70% (exon 2) to 100% (exons 7, 12, and 15), with the remaining exons having 89-98% identity between the delta 1 and delta 2 genes. Consequently, the encoded delta 2 polypeptide is 91% identical to the delta 1 polypeptide. Considerable similarity also exists between homologous introns of delta 1 and delta 2, with most of the differences accounted for by insertions and/or deletions. The presence of a TATA box, consensus splice junctions (almost identical to the delta 1 gene), lariat branch sequences, and a polyadenylation signal strengthen the possibility that delta 2 is a functional gene.     

The nucleotide sequence of the gene for malF protein, an inner membrane component of the maltose transport system of Escherichia coli. Repeated DNA sequences are found in the malE-malF intercistronic region

The malF gene product is an inner membrane component of the maltose transport system in Escherichia coli. Some gene fusions between malF and lacZ (encoding the normally cytoplasmic enzyme beta-galactosidase) produce hybrid proteins which are membrane-bound while other fusions produce hybrid proteins which are cytoplasmic (Silhavy, T. J., Casadaban, M. J., Shuman, H. A., and Beckwith, J. R. (1976) Proc. Natl. Acad. Sci. U. S. A. 73, 3423-3427). To further analyze the localization properties of the different classes of fusion proteins and of the intact MalF protein, we have obtained the DNA sequence of 5 malF-lacZ fusions and the wild type malF gene. From the predicted amino acid sequence, MalF protein contains 514 amino acids and has a molecular weight of 56,947. Analysis of the hydropathic character of MalF using the Kyte-Doolittle assignments (Kyte, J., and Doolittle, R. F. (1982) J. Mol. Biol. 157, 105-132), indicates that the protein may have 2 or 3 amino-terminal membrane-spanning segments and 4 or 5 carboxy-terminal membrane-spanning segments separated by a region of 181 hydrophilic residues. Localization properties of the different fusion proteins correspond with degree of hydrophobicity. By sequencing upstream from malF, the malE-malF intercistronic region was found to be 153 base pairs in length and to contain inverted repeats, homologous to intercistronic repeats of many other operons. Further analysis of this region may help in understanding the observed step-down in synthesis of the MalF protein.     

Structure-activity studies of the inhibition of FabI,the enoyl reductase from Escherichia coli,by triclosan: kinetic analysis of mutant FabIs

Triclosan, a common antibacterial additive used in consumer products, is an inhibitor of FabI, the enoyl reductase enzyme from type II bacterial fatty acid biosynthesis. In agreement with previous studies [Ward, W. H., Holdgate, G. A., Rowsell, S., McLean, E. G., Pauptit, R. A., Clayton, E., Nichols, W. W., Colls, J. G., Minshull, C. A., Jude, D. A., Mistry, A., Timms, D., Camble, R., Hales, N. J., Britton, C. J., and Taylor, I. W. (1999) Biochemistry 38, 12514-12525], we report here that triclosan is a slow, reversible, tight binding inhibitor of the FabI from Escherichia coli. Triclosan binds preferentially to the E.NAD(+) form of the wild-type enzyme with a K(1) value of 23 pM. In agreement with genetic selection experiments [McMurry, L. M., Oethinger, M., and Levy, S. B. (1998) Nature 394, 531-532], the affinity of triclosan for the FabI mutants G93V, M159T, and F203L is substantially reduced, binding preferentially to the E.NAD(+) forms of G93V, M159T, and F203L with K(1) values of 0.2 microM, 4 nM, and 0.9 nM, respectively. Triclosan binding to the E.NADH form of F203L can also be detected and is defined by a K(2) value of 51 nM. We have also characterized the Y156F and A197M mutants to compare and contrast the binding of triclosan to InhA, the homologous enoyl reductase from Mycobacterium tuberculosis. As observed for InhA, Y156F FabI has a decreased affinity for triclosan and the inhibitor binds to both E.NAD(+) and E.NADH forms of the enzyme with K(1) and K(2) values of 3 and 30 nM, respectively. The replacement of A197 with Met has no impact on triclosan affinity, indicating that differences in the sequence of the conserved active site loop cannot explain the 10000-fold difference in affinities of FabI and InhA for triclosan.     

The kangaroo cation-independent mannose 6-phosphate receptor binds insulin-like growth factor II with low affinity.

The mammalian cation-independent mannose 6-phosphate receptor (CI-MPR) binds mannose 6-phosphate-bearing glycoproteins and insulin-like growth factor (IGF)-II. However, the CI-MPR from the opossum has been reported to bind bovine IGF-II with low affinity (Dahms, N. M., Brzycki-Wessell, M. A., Ramanujam, K. S., and Seetharam, B. (1993) Endocrinology 133, 440-446). This may reflect the use of a heterologous ligand, or it may represent the intrinsic binding affinity of this receptor. To examine the binding of IGF-II to a marsupial CI-MPR in a homologous system, we have previously purified kangaroo IGF-II (Yandell, C. A., Francis, G. L., Wheldrake, J. F., and Upton, Z. (1998) J. Endocrinol. 156, 195-204), and we now report the purification and characterization of the CI-MPR from kangaroo liver. The interaction of the kangaroo CI-MPR with IGF-II has been examined by ligand blotting, radioreceptor assay, and real-time biomolecular interaction analysis. Using both a heterologous and homologous approach, we have demonstrated that the kangaroo CI-MPR has a lower binding affinity for IGF-II than its eutherian (placental mammal) counterparts. Furthermore, real-time biomolecular interaction analysis revealed that the kangaroo CI-MPR has a higher affinity for kangaroo IGF-II than for human IGF-II. The cDNA sequence of the kangaroo CI-MPR indicates that there is considerable divergence in the area corresponding to the IGF-II binding site of the eutherian receptor. Thus, the acquisition of a high-affinity binding site for regulating IGF-II appears to be a recent event specific to the eutherian lineage.