Immobilization of blue green microalgae on loofa sponge to biosorb cadmium in repeated shake flask batch and continuous flow fixed bed column reactor system

Summary An indigenous strain of blue green microalga, Synechococcus sp., isolated from wastewater, was immobilized onto loofa sponge discs and investigated as a potential biosorbent for the removal of cadmium from aqueous solutions. Immobilization has enhanced the sorption of cadmium and an increase of biosorption (21%) at equilibrium was noted as compared to free biomass. The kinetics of cadmium biosorption was extremely rapid, with (96%) of adsorption within the first 5 min and equilibrium reached at 15 min. Increasing initial pH or initial cadmium concentration resulted in an increase in cadmium uptake. The maximum biosorption capacity of free and loofa immobilized biomass of Synechococcus sp. was found to be 47.73 and 57.76 mg g⁻¹ biomass respectively. The biosorption equilibrium was well described by Langmuir adsorption isotherm model. The biosorbed cadmium was desorbed by washing the immobilized biomass with dilute HCl (0.1 M) and desorbed biomass was reused in five biosorption–desorption cycles without an apparent decrease in its metal biosorption capacity. The metal removing capacity of loofa immobilized biomass was also tested in a continuous flow fixed-bed column bioreactor and was found to be highly effective in removing cadmium from aqueous solution. The results suggested that the loofa sponge-immobilized biomass of Synechococcus sp. could be used as a biosorbent for an efficient removal of heavy metal ions from aqueous solution.     

土生鳞伞对Cd2+的吸附特性

以土生鳞伞（Pholiota terrestris Overh.）子实体为生物吸附剂吸附水溶液中的Cd2+,分析吸附剂用量、初始pH值、初始重金属浓度、反应时间这4个因素对吸附的影响,并采用Langmuir和Freundlich等温吸附模型及准一级、准二级动力学模型拟合土生鳞伞的生物吸附特性.结果表明:水溶液中Cd2+...     

Removal of chromate anions from aqueous stream by a cationic surfactant-modified yeast

The removal of chromate anions (CrO(4)(2-)) from aqueous solution by a cationic surfactant-modified yeast was studied in a batch system. Cetyl trimethyl ammonium bromide (CTAB) was used for biomass modification; it substantially improved the biosorption efficiency. The influences of solution pH, CrO(4)(2-) anion concentrations and biomass concentration on the biosorption efficiency were investigated. The biosorption of chromate anions by modified yeast was strongly affected by pH. The optimum pH for biosorption of CrO(4)(2-) by modified yeast was 4.5-5.5. Zeta potential values of modified and unmodified yeast were determined at various pH values. Concentrations ranging from 5.2 to 208 mg/l Cr(VI) were tested and the biosorptive removal efficiency of the metal ions from aqueous solution was more than 99.5%. Freundlich and Langmuir isotherms were used to evaluate the data and the regression constants were determined.     

Kinetic modeling and equilibrium studies during cadmium biosorption by dead Sargassum sp. biomass

A basic investigation on the removal of cadmium(II) ions from aqueous solutions by dead Sargassum sp. was conducted in batch conditions. The influence of different experimental parameters; initial pH, shaking rate, sorption time, temperature and initial concentrations of cadmium ions on cadmium uptake was evaluated. Results indicated that cadmium uptake could be described by the Langmuir adsorption model, being the monolayer capacity negatively affected with an increase in temperature. Analogously, the adsorption equilibrium constant decreased with increasing temperature. The kinetics of the adsorption process followed a second-order adsorption, with characteristic constants increasing with increasing temperature. Activation energy of biosorption could be calculated as equal to 10 kcal/mol. The biomass used proved to be suitable for removal of cadmium from dilute solutions. Its maximum uptake capacity was 120 mg/g. It can be considered an optimal result when compared to conventional adsorbing materials. Thus Sargassum sp. has great potential for removing cadmium ions especially when concentration of this metal is low in samples such as wastewater streams.     

Heavy metal biosorption by biomass of Ochrobactrum anthropi producing exopolysaccharide in activated sludge

The removal of chromium, cadmium and copper, toxic metals of high environmental priority due to their toxicity, from dilute aqueous solutions has been studied in the present work, applying a dead exopolysaccharide producing bacterium, Ochrobactrum anthropi, isolated from activated sludge. Particularly, the effect of pH, metal concentration and the effects of contact time were considered. Optimum adsorption pH values of chromium(VI), cadmium(II) and copper(II) were 2.0, 8.0 and 3.0 respectively. Experimental results also showed the influence of initial metal concentration on the metal uptake for dried biomass. Both the Freundlich and Langmuir adsorption models were suitable for describing the short-term biosorption of chromium(VI), cadmium(II) and copper(II) by O. anthropi.     

Application of dried sewage sludge as phenol biosorbent

The aim of this work was to determine the potential application of dried sewage sludge as a biosorbent for removing phenol from aqueous solution. Results showed that biosorption capacity was strongly influenced by the pH of the aqueous solution with an observed maximum phenol removal at pH around 6-8. Biosorption capacity increased when initial phenol concentration was increased to 110 mg/L but beyond this concentration, biosorption capacity decreased suggesting an inhibitory effect of phenol on biomass activity. Biosorption capacity decreased from 94 to 5 mg/g when biosorbent concentration was increased from 0.5 to 10 g/L suggesting a possible competitive effect of leachable heavy metals from the sludge. The effect of Cu2+ on biosorption capacity was also observed and the results confirmed that the phenol biosorption capacity decreased when concentration of Cu2+ in the sorption medium was increased up to 15 mg/L. Desorption of phenol using distilled deionized water was less than 2% suggesting a strong biosorption by the biomass.     

Biosorption of lead(II), cadmium(II), copper(II) and nickel(II) by anaerobic granular biomass

Biosorption is potentially an attractive technology for treatment of wastewater for retaining heavy metals from dilute solutions. This study investigated the feasibility of anaerobic granules as a novel type of biosorbent, for lead, copper, cadmium, and nickel removal from aqueous solutions. Anaerobic sludge supplied from a wastewater treatment plant in the province of Quebec was used. Anaerobic granules are microbial aggregates with a strong, compact and porous structure and excellent settling ability. After treatment of the biomass with Ca ions, the cation exchange capacity of the biomass was approximately 111 meq/100 g of biomass dry weight which is comparable to the metal binding capacities of commercial ion exchange resins. This work investigated the equilibrium, batch dynamics for the biosorption process. Binding capacity experiments using viable biomass revealed a higher value than those for nonviable biomass. Binding capacity experiments using non-viable biomass treated with Ca revealed a high value of metals uptake. The solution initial pH value affected metal sorption. Over the pH range of 4.0-5.5, pH-related effects were not significant. Meanwhile, at lower pH values the uptake capacity decreased. Time dependency experiments for the metal ions uptake showed that adsorption equilibrium was reached almost 30 min after metal addition. It was found that the q(max) for Pb2+, Cd2+, Cu2+, and Ni2+ ions, were 255, 60, 55, and 26 mg/g respectively (1.23, 0.53, 0.87, and 0.44 mmol/g respectively). The data pertaining to the sorption dependence upon metal ion concentration could be fitted to a Langmiur isotherm model. Based on the results, the anaerobic granules treated with Ca appear to be a promising biosorbent for removal of heavy metals from wastewater due to its optimal uptake of heavy metals, its particulate shape, compact porous structure, excellent settling ability, and its high mechanical strength.     

Biosorption of Pb2+ from aqueous solution by waste biomass of aerial roots of Rhizophora mangle (red mangrove)

The processing waste of the aerial roots of Rhizophora mangle was used in both its unmodified or mercaptoacetic acid (MAA) modified form for the sorption of Pb2+ from aqueous solution. The biomass rapidly and strongly sorbed Pb2+ at pH 5.0, which indicated chemisorption. A significant increase in Pb2+ sorption resulted from MAA treatment of the biomass, indicating that sorption occurs through an ion-exchange process. From sorption-capacity experiments, the unmodified and modified materials extracted, at pH 5, 31.3 and 85.5 mg of Pb2+ per gram of biomass, respectively, from aqueous solutions. Our studies may contribute to an innovative method for the economical and ecologically save removal and recovery of heavy-atom metal ions from contaminated waters through biosorption.     

Potential use of green algae as a biosorbent for hexavalent chromium removal from aqueous solutions

The hexavalent chromium Cr(VI) poses a threat as a hazardous metal and its removal from aquatic environments through biosorption has gained attention as a viable technology of bioremediation. We evaluated the potential use of three green algae (Cladophora glomerata, Enteromorpha intestinalis and Microspora amoena) dry biomass as a biosorbent to remove Cr(VI) from aqueous solutions. The adsorption capacity of the biomass was determined using batch experiments. The adsorption capacity appeared to depend on the pH. The optimum pH with the acid-treated biomass for Cr(VI) biosorption was found to be 2.0 at a constant temperature, 45?°C. Among the three genera studied, C. glomerata recorded a maximum of 66.6% removal from the batch process using 1.0?g dried algal cells/100?ml aqueous solution containing an initial concentration of 20?mg/L chromium at 45?°C and pH 2.0 for 60?min of contact time. Langmuir and Freundlich isotherm equations fitted to the equilibrium data, Freundlich was the better model. Our study showed that C. glomerata dry biomass is a suitable candidate to remove Cr(VI) from aqueous solutions.     

Enhancement of Lead(II) Biosorption by Microalgal Biomass Immobilized onto Loofa (Luffa cylindrica) Sponge

A unicellular green microalga, Chlorella sorokiniana, was immobilized on loofa (Luffa cylindrica) sponge and successfully used as a new biosorption system for the removal of lead(II) ions from aqueous solutions. The biosorption of lead(II) ions on both free and immobilized biomass of C. sorokiniana was investigated using aqueous solutions in the concentration range of 10–300 mg/L. The biosorption of lead(II) ions by C. sorokiniana biomass increased as the initial concentration of lead(II) ions increased in the medium. The maximum biosorption capacity for free and immobilized biomass of C. sorokiniana was found to be 108.04 and 123.67 mg lead(II)/g biomass, respectively. The biosorption kinetics were found to be fast, with 96 % of adsorption within the first 5 min and equilibrium reached at 15 min. The adsorption of lead(II) both by free and immobilized C. sorokiniana biomass followed the Langmuir isotherm. The biosorption capacities were detected to be dependent on the pH of the solution; and the maximum adsorption was obtained at a solution pH of about 5. The effect of light metal ions on lead(II) uptake was also studied and it was shown that the presence of light metal ions did not significantly affect lead(II) uptake. The loofa sponge‐immobilized C. sorokiniana biomass could be regenerated using 0.1 M HCl, with up to 99 % recovery. The desorbed biomass was used in five biosorption‐desorption cycles, and no noticeable loss in the biosorption capacity was observed. In addition, fixed bed breakthrough curves for lead(II) removal were presented. These studies demonstrated that loofa sponge‐immobilized biomass of C. sorokiniana could be used as an efficient biosorbent for the treatment of lead(II) containing wastewater.     

Biosorption of chromium(VI) from aqueous solution by cone biomass of Pinus sylvestris

Biosorption of chromium(VI) on to cone biomass of Pinus sylvestris was studied with variation in the parameters of pH, initial metal ion concentration and agitation speed. The biosorption of Cr(VI) was increased when pH of the solution was decreased from 7.0 to 1.0. The maximum chromium biosorption occurred at 150 rpm agitation. An increase in chromium/biomass ratio caused a decrease in the biosorption efficiency. The adsorption constants were found from the Freundlich isotherm at 25 degrees C. The cone biomass, which is a readily available biosorbent, was found suitable for removing chromium from aqueous solution.     

Biosorption of Malathion by dry cells of an isolated Bacillus sp. S14

Abstract

The removal of Malathion, a moderately toxic organophosphate pesticide causing environmental pollution, from dilute aqueous solutions was studied. The experimental results showed that the dry cells of Bacillus sp. S₁₄ were effective in removing Malathion from solution. Biosorption equilibrium was attained within 6h. Maximum biosorption of Malathion (81.4%) was observed under the following environmental conditions, pH 6.5, temperature 25°C, dry biomass concentration 1g L^?1 at 6h. Both Langmuir and Freundlich isotherms were tested and the latter had a better fit with the data. The dried powdered cells of Bacillus sp. S₁₄ can be safely stored for 60 days at room temperature without any loss of biosorption efficiency. The results suggest that the dry cells of the isolated Bacillus sp. S₁₄ can be used as a biosorbent for an efficient removal of Malathion from aqueous solutions.     

Biosorption of Food Green 3 by a novel green generation composite biosorbent from aqueous environment

A green type composite biosorbent composed of pine, oak, hornbeam, and fir sawdust biomasses modified with cetyltrimethylammonium bromide (CTAB) was first used for biosorption of an unsafe synthetic food dye, Food Green 3 from liquid medium in this study. Batch studies were carried by observing the effects of pH, dye concentration, biosorbent amount, and contact time. The equilibrium data were analyzed using Freundlich, Langmuir, and Dubinin–Radushkevich equations. Freundlich model gave a better conformity than other equations. The maximum dye removal potential of biosorbent was found to be 36.6 mg/g based on Langmuir isotherm. The pseudo-first-order, pseudo-second-order, Elovich, and intra-particle diffusion models were applied to clarify the process kinetics of biosorption. The mechanism studies suggested the biosorption process obeying Elovich kinetics and involving pore diffusion. The estimated values of biosorption free energy from Dubinin–Radushkevich isotherm (E value <8 kJ/mol) and thermodynamic studies (0 < ΔG° < ?20 kJ/mol) implied a spontaneous, feasible, and physical process. Hence, this investigation suggested that the CTAB modified mix sawdust biomass could be a promising biosorbent for biosorption of such problematic dyes from impacted media.     

Cr6+ bioremediation efficiency of Oscillatoria laete-virens (Crouan & Crouan) Gomont and Oscillatoria trichoides Szafer: kinetics and equilibrium study

Two species of cyanobacteria, Oscillatoria laete-virens (Crouan & Crouan) Gomont and Oscillatoria trichoides Szafer, were isolated from a polluted environment and studied for their Cr⁶⁺ removal efficiency from aqueous solutions. The parameters studied included the solution pH, contact time, initial concentration of Cr⁶⁺ and culture density. Living biomass is more efficient than dead biomass in Cr⁶⁺ removal. Removal by living biomass involves bioreduction and biosorption. Below pH 3.1, bioreduction is favored and biosorption is dominant at higher pH. The highest removal through biosorption for living biomass was achieved between pH 5 and 5.9 and for dead biomass at pH 2. The maximum removal was on the tenth day of exposure for both the species. Cr⁶⁺ removal increased from 0.2 to 0.4 g L^?1 of culture biomass with a decrease with further increase in biomass. Increased Cr⁶⁺ concentration decreases growth of both the species over time. Both species tolerate a concentration as high as 30 mg L^?1 Cr⁶⁺. There was no evidence of bioreduction in the case of dead biomass. Living biomass of O. laete-virens followed both Langmuir and Freundlich models with maximum sorptive capacity (q _max) of 21.88 mg g^?1. The results of dead biomass were well fitted only to Langmuir isotherm. O. trichoides living biomass did not follow either of the isotherms, but removed the metal to a maximum extent of 38.7mg g^?1. The removal was better described by Freundlich isotherm in case of dead biomass. The pseudo-first-order model describes the kinetics better than the pseudo-second-order model in the case of living biomass. Participation of carboxylic, carbonyl, and amino groups in Cr⁶⁺ removal was confirmed by FTIR analysis. Both species seem to be promising biosorbents for Cr⁶⁺.     

Fish (Labeo rohita) Scales as Potential Low-Cost Biosorbent for Removal of Malachite Green from Aqueous Solutions

The feasibility of using fish (Labeo rohita) scales as low-cost biosorbent for the removal of hazardous Malachite Green (MG) dye from aqueous solutions was investigated. Employing a batch experimental setup, the effect of operational parameters such as biosorbent dose, initial solution pH, contact time, and temperature on the dye removal process was studied. The equilibrium biosorption data followed both Langmuir and Freundlich isotherm models, whereas the experimental kinetic data fitted well to the pseudo-second-order kinetic model. Thermodynamic study indicated spontaneous and endothermic nature of the biosorption process. The results suggest that fish scales could be used as an effective biosorbent for removal of MG dye from aqueous solutions.     

Biosorption of an Azo Dye by <Emphasis Type="Italic">Aspergillus niger</Emphasis> and <Emphasis Type="Italic">Trichoderma</Emphasis> sp. Fungal Biomasses

Biosorption is an eco-friendly and cost-effective method for treating the dye house effluents. Aspergillus niger and Trichoderma sp. were cultivated in bulk and biomasses used as biosorbents for the biosorption of an azo dye Orange G. Batch biosorption studies were performed for the removal of Orange G from aqueous solutions by varying the parameters like initial aqueous phase pH, biomass dosage, and initial dye concentration. It was found that the maximum biosorption was occurred at pH 2. Experimental data were analyzed by model equations such as Langmuir and Freundlich isotherms, and it was found that both the isotherm models best fitted the adsorption data. The monolayer saturation capacity was 0.48 mg/g for Aspergillus niger and 0.45 mg/g for Trichoderma sp. biomasses. The biosorption kinetic data were tested with pseudo first-order and pseudo second-order rate equations, and it was found that the pseudo second-order model fitted the data well for both the biomasses. The rate constant for the pseudo second-order model was found to be 10–0.8 (g/mg min⁻¹) for Aspergillus niger and 8–0.4 (g/mg min⁻¹) for Trichoderma sp. by varying the initial dye concentrations from 5 to 25 mg/l. It was found that the biomass obtained from Aspergillus niger was a better biosorbent for the biosorption of Orange G dye when compared to Trichoderma sp.     

Biosorption of mercury from aqueous solution by Ulva lactuca biomass

The mercury biosorption onto non-living protonated biomass of Ulva lactuca, as an alternative method for mercury removal from aqueous solutions, was investigated. Batch equilibrium tests showed that at pH 3.5, 5.5 and 7 the maxima of mercury uptake values, according to Langmuir adsorption isotherm, were 27.24, 84.74 and 149.25 mg/g, respectively. The ability of Ulva lactuca biomass to adsorb mercury in fixed-bed column, was investigated as well. The influence of column bed height, flow rate and effluent initial concentration of metal was studied. The adsorbed metal ions were easily desorbed from the algal biomass with 0.3 N H₂SO₄ solution. After acid desorption and regeneration with distilled water, the biomass could be reused for other biosorption assays with similar performances.     

Flotation as a bioseparation process for fungi removal

Summary Collectorless flotation has been investigated at a laboratory scale, as a separation technique applied effectively to biomass fine particles (dead free) of Penicillium and Rhizopus; these were previously used for cadmium (a priority toxic pollutant) biosorption from dilute aqueous solutions. The basic parameters of dispersea-air flotation were studied, i.e. solution pH, flotation time, ethanol addition (used as a convenient frother), Cd and biomass concentration.