Health risk assessment of occupational exposure to styrene depending on the type of industry: Data from the Workplace Environmental Monitoring Program in Korea

Data from the Workplace Environmental Monitoring Program was used to evaluate the concentrations and risk of occupational exposure to styrene in different industries to identify which industries should be prioritized for styrene exposure management. Risk assessments were conducted for the five industries with several workplaces that mostly use styrene: motor vehicle and motorcycle maintenance and repair services, other chemical product manufacturing, ship and boat building, basic chemical manufacturing, and plastic products manufacturing. The highest central tendency exposure was found in the plastic products manufacturing industry (10.14 mg/m³). In addition, the hazard quotient (HQ) for central tendency exposure exceeded 1 only in the plastic products manufacturing industry. Almost two-thirds (62.2%) of workplaces in the plastic products manufacturing industry have an HQ exceeding 1. We conclude that workers in the plastic products manufacturing industry are at the highest risk for styrene exposure, and those in motor vehicle and motorcycle maintenance and repair service and basic chemical manufacturing are at the lowest risk. These results show that styrene exposure could be most effectively managed by prioritizing control measures in the plastic products manufacturing industry.     

Depositional fluxes and sources of particulate carbon and nitrogen in natural lakes and a young boreal reservoir in Northern Québec

We investigated the depositional trends of total particles, carbon and nitrogen in a newly created, 600-km² hydroelectric reservoir in Northern Québec, and compared the results with those observed in lakes of the surrounding region. We show that particulate fluxes exhibit a large degree of spatial heterogeneity in both the reservoir (68–548 mg POC m^?2 d^?1 and 5–33 mg PN m^?2 d^?1) and the natural lakes (30–150 mg POC m^?2 d^?1 and 3–12 mg PN m^?2 d^?1) and that on average, settling fluxes of the reservoir (211 ± 46 mg POC m^?2 d^?1 and 14 ± 3 mg PN m^?2 d^?1) exceeded lake deposition (79 ± 13 mg POC m^?2 d^?1 and 7 ± 1 mg PN m^?2 d^?1) by approximately two-fold. Our results also show that the nature of the organic matter reaching the sediments was significantly different between lakes and the reservoir, which can have consequences for benthic metabolism and the long-term storage. We found that sinking fluxes in the reservoir were mostly regulated by local morphological and hydrological conditions, with higher fluxes along or in the vicinity of the old riverbed (average 400 ± 73 mg POC m^?2 d^?1 and 24 ± 5 mg PN m^?2 d^?1) and lower fluxes in calmer zones such as side bays (average 106 ± 10 mg POC m^?2 d^?1 and 8 ± 1 mg PN m^?2 d^?1). In lakes, where settling fluxes were not linked to the trophy, or dissolved organic carbon, the actual nature of the sedimenting organic material was influenced by lake morphometry and the relative contribution of algal versus terrestrial sources. We conclude that re-suspension and erosion play a major role in shaping the reservoir sinking fluxes which explain both, the higher reservoir deposition and also some of the qualitative differences between the two systems. Despite all these differences, sinking particulate organic carbon fluxes were small and surprisingly similar relative to the surface carbon dioxide emissions in both the reservoir and lakes, representing approximately 16–17 % of the carbon efflux estimated for these same systems in 2008.     

Performance evaluation of an integrated constructed wetland used to treat a contaminated aquatic environment

The treatment performance of an integrated constructed wetland (ICW) that was in operation for 3 years was evaluated. Artificial neural network modeling was used to predict contaminant treatment efficiencies based on easily measured field parameters. The estimates for average yearly removals of total phosphorus (TP), total nitrogen (TN), chemical oxygen demand (COD), and total suspended solids (TSS) were 0.81 ± 0.18, 7.17 ± 1.62, 63.80 ± 17.41, and 126.12 ± 48.61 g m^?2 d^?1, respectively. Removal velocities of contaminants were determined from analyses of inlet–outlet datasets. The areal removal rate constants were 0.46, 0.73, 0.44, and 0.82 m d^?1 for TP, TN, COD, and TSS, respectively. The presence of high background concentrations of contaminants (TP: 0.01 mg L^?1, TN: 0.13 mg L^?1, COD: 6.43 mg L^?1, TSS: 14.83 mg L^?1) indicated that the water in the ICW was mesotrophic. Statistical methods (i.e., principal component analysis (PCA), forward selection, and correlation analysis) were used to select optimal input subsets for different contaminants. These data subsets were subsequently used for model development. To find the optimal network architectures, a genetic algorithm was introduced to the learning processes. The models were competent at providing reasonable matches between the measured and the predicted effluent concentrations of TP (R² = 0.9711), TN (R² = 0.8875), COD (R² = 0.9359), and TSS (R² = 0.9164). The results of the models provided information that will be useful for the design and modification of constructed wetlands.     

Exposure Monitoring and Health Risk Assessment of 1-Bromopropane as a Cleaning Solvent in the Workplace

This study was conducted to estimate the health risk to workers exposed to 1-bromopropane (1-BP) used as a cleaning solvent in their workplaces. Fifty samples from 10 workplaces that use 1-BP as a cleaning solvent were obtained to assess 1-BP concentrations. An exposure assessment revealed central tendency exposure (CTE) and reasonable maximum exposure (RME) levels of 82.1 and 214.8 mg/m³, respectively. For risk characterization, the 1-BP exposure concentrations for reproductive and developmental toxicities were calculated as 2.8 and 8.5 mg/m³, respectively, and compared with the reference concentrations in the workplace. The CTE and RME hazard quotients (HQ) were, respectively, 29.4 and 77.0 for reproductive toxicity and 9.6 and 25.2 for developmental toxicity. The results of our 1-BP risk assessment indicated that the CTE-HQs for both categories were higher than the acceptable risk value of 1, indicating that 1-BP may be considered as harmful to workers.     

大陈岛海域浮游动物群落季节变化及其影响因素

为探究大陈岛海域浮游动物群落的季节变化,于2020年9月（夏季）、11月（秋季）和2021年1月（冬季）、4月（春季）分别对大陈岛海域的浮游动物及环境因子进行了4个航次的调查。结果共鉴定浮游动物90种,包括浮游幼体15类,其中夏季种类数最多（68种）,冬季最少（20种）,常见的优势种有：百陶箭虫（Sagitta bedoti）、微刺哲水蚤（Canthocalanus pauper）、中华哲水蚤（Calanus sinicus）等12种（Y>0.02）。浮游动物的年平均丰度和生物量分别为（153.40±214.73）个/m³、（411.93±561.76） mg/m³,二者存在明显的季节变化,平均丰度为春季（380.17±296.14）个/m³>夏季（135.30±112.59）个/m³>秋季（67.88±90.52）个/m³>冬季（25.30±19.11）个/m³;平均生物量为夏季（895.01±802.54） mg/m³>春季（623.39±358.73） mg/m³>秋季（91.08±82.36） mg/m³>冬季（45.96±84.95） mg/m³。多样性指数（H''）和均匀度指数（J''）的年平均值分别为1.71±0.96和0.53±0.20,均表现出夏秋季较高、冬春季较低的特征。聚类分析结果表明调查海域的浮游动物可划分为夏季类群、秋季类群、冬季类群和春季类群4组类群。Pearson相关性分析和冗余分析（RDA）结果表明,海水温度、盐度、叶绿素a浓度是影响大陈岛海域浮游动物群落特征的重要环境因素。此外,夏季大陈岛海域水母类浮游动物暴发的现象值得关注。研究结果将为大陈岛海域的生物多样性保护及渔业资源可持续开发利用提供可参考的数据资料。     

Long-term operation of double chambered microbial fuel cell for bio-electro denitrification

The main aim of this study is to investigate the performance of organic oxidation and denitrification of the system under long-term operation. The MFC reactor was operated in continuous mode for 180 days. Nitrate was successfully demonstrated as terminal electron acceptor, where nitrate was reduced at the cathode using electron provided by acetate oxidation at the anode. The removal efficiencies of chemical oxygen demand (COD) and nitrate were higher in the closed circuit system than in open circuit system. Both COD and nitrate reduction improved with the increase of organic loading and subsequently contributed to higher power output. The maximum nitrate removal efficiency was 88 ± 4 % (influent of 141 ± 14 mg/L). The internal resistant was 50 Ω, which was found to be low for a double chambered MFC. The maximum power density was 669 mW/m³ with current density of 3487 mA/m³.     

Heterotrophic microorganisms and viruses in the water of the Gorky reservoir during a period of anomalously high water temperature

During the anomalously hot summer of 2010, the water temperature in the Gorky reservoir reached 27–33°C. Pronounced cyanobacterial blooms occurred in the limnetic part of the reservoir. The average values for bacterioplankton abundance (11.58 ± 1.25 × 10⁶ cell/mL), biomass (886 ± 96 mg/m³), and production [169 ± 32 mg C/(m³ day)] were twice as high as in the year with temperatures comparable to long-term average values. These parameters were higher in the limnetic part than in the river one. The abundance (4.86 ± 0.75 × 10³ cell/mL) and biomass (138 ± 9 mg/m³) of heterotrophic nanoflagellates were 2.3 and 1.7 times higher, respectively, than in years with regular temperature regimes. The average number of plank-tonic viral particles (N _v) in 2010 was 48.89 ± 9.54 × 10⁶ particles/mL, while virus-induced bacterial mortality (VMB) accounted for 26.9 ± 4.6% of the bacterial production. The N _v and VMB values in the limnetic part of the reservoir were, respectively, 1.5 and 1.8 times higher than in the river one.     

A Counter-Current Acid Leaching Process for the Remediation of Contaminated Soils from a Small-Arms Shooting Range

The objective of this research was to use a counter-current leaching process (CCLP) with leachate treatment to develop a remediation process for contaminated soils at a small-arms shooting range (SASR). The soil contaminant concentrations were 245 mg Cu kg^?1, 3,368 mg Pb kg^?1, 73 mg Sb kg^?1, and 177 mg Zn kg^?1. The CCLP includes three acid leaching steps (1M H₂SO₄ + 4M NaCl, t = 1 h, T = 20°C, soil suspension = 100 g L^?1), followed by one water rinsing step (1 h). Seven counter-current remediation cycles were completed, and the average resulting metal removals were 93.2 ± 3.5% of Cu, 91.5 ± 5.7% of Pb, 82.2 ± 10.9% of Sb, and 30.0 ± 11.4% of Zn. The metal leaching performances decreased with the number of completed cycles. Soil treated with the CCLP with leachate treatment process met the USEPA threshold criteria of 5 mg Pb L^?1 in the TCLP leachate. The CCLP allows a decrease of the water use by 32.9 m³ t^?1 and the chemicals’ consumption by approximately 2,650 kg H₂SO₄, 6,014 kg NaCl, and 1,150 kg NaOH per ton of treated soil, in comparison to standard leaching processes. This corresponds to 78%, 69%, 83%, and 67% of reduction, respectively.     

Domestic wastewater treatment using multi-electrode continuous flow MFCs with a separator electrode assembly design

Treatment of domestic wastewater using microbial fuel cells (MFCs) will require reactors with multiple electrodes, but this presents unique challenges under continuous flow conditions due to large changes in the chemical oxygen demand (COD) concentration within the reactor. Domestic wastewater treatment was examined using a single-chamber MFC (130 mL) with multiple graphite fiber brush anodes wired together and a single air cathode (cathode specific area of 27 m²/m³). In fed-batch operation, where the COD concentration was spatially uniform in the reactor but changed over time, the maximum current density was 148?±?8 mA/m² (1,000 Ω), the maximum power density was 120 mW/m², and the overall COD removal was >90 %. However, in continuous flow operation (8 h hydraulic retention time, HRT), there was a 57 % change in the COD concentration across the reactor (influent versus effluent) and the current density was only 20?±?13 mA/m². Two approaches were used to increase performance under continuous flow conditions. First, the anodes were separately wired to the cathode, which increased the current density to 55?±?15 mA/m². Second, two MFCs were hydraulically connected in series (each with half the original HRT) to avoid large changes in COD among the anodes in the same reactor. The second approach improved current density to 73?±?13 mA/m². These results show that current generation from wastewaters in MFCs with multiple anodes, under continuous flow conditions, can be improved using multiple reactors in series, as this minimizes changes in COD in each reactor.     

Comparing soil carbon sequestration in coastal freshwater wetlands with various geomorphic features and plant communities in Veracruz,Mexico

Background and aims

Wetlands are important carbon sinks across the planet. However, soil carbon sequestration in tropical freshwater wetlands has been studied less than its counterpart in temperate wetlands. We compared carbon stocks and carbon sequestration in freshwater wetlands with various geomorphic features (estuarine, perilacustrine and depressional) and various plant communities (marshes and swamps) on the tropical coastal plain of the Gulf of Mexico in the state of Veracruz, Mexico. These swamps are dominated by Ficus insipida, Pachira aquatic and Annona glabra and the marshes by Typha domingensis, Thalia geniculata, Cyperus giganteus, and Pontederia sagittata.

Methods

The soil carbon concentration and bulk density were measured every 2 cm along 80 cm soil profiles in five swamps and five marshes. Short-term sediment accretion rates were measured during a year using horizontal makers in three of the five swamps and marshes, the carbon sequestration was calculated using the accretion rates, and the bulk density and the percentage of organic carbon in the surficial layer was measured.

Results

The average carbon concentration ranged from 50 to 150 gC kg^?1 in the marshes and 50 to 225 gC kg^?1 in the swamps. When the wetlands were grouped according to their geomorphic features, no significant differences in the carbon stock (P?=?0.095) were found (estuarine (25.50?±?2.26 kgC m^?2), perilacustrine (28.33?±?2.74 kgC m^?2) and depressional wetlands (34.93?±?4.56 kgC m^?2)). However, the carbon stock was significantly higher (P?=?0.030) in the swamps (34.96?±?1.3 kgC m^?2) than in the marshes (25.85?±?1.19 kgC m^?2). The average sediment accretion rates were 1.55?±?0.09 cm yr^?1 in the swamps and 0.84?±?0.02 cm yr^?1 in the marshes with significant differences (P?=?0.040). The rate of carbon sequestration was higher (P?=?0.001) in swamp soils (0.92?±?0.12 kgC m^?2 yr^?1) than marsh soils (0.31?±?0.08 kgC m^?2 yr^?1). Differences in the rates of carbon sequestration associated with geomorphic features were found between the swamp ecosystems (P?<?0.05); i.e., higher values were found in the swamps than in the marshes in perilacustrine and estuarine wetlands (P?<?0.05). However, no significant differences (P?=?0.324) in carbon sequestration rates were found between the marsh and swamp areas of the depressional site.

Conclusions

Swamp soils are more important contributors to the carbon stock and sequestration than are marsh soils, resulting in a reduction in global warming, which suggests that the plant community is an important factor that needs to be considered in global carbon budgets and projects of restoration and conservation of wetlands.     

Tree Species Composition, Structure, and Aboveground Wood Biomass of a Riparian Forest of the Lower Miranda River, Southern Pantanal, Brazil

The aboveground wood biomass (AWB) of tropical forests plays an important role in the global carbon cycle, and local AWB estimates provide essential data that enable the extrapolation of biomass stocks to ecosystem or biome-wide carbon cycle modelling. Few AWB estimates exist in Neotropical freshwater floodplains, where tree species distribution and forest structure depend on the height and duration of periodic inundations. We investigated tree species composition, forest structure, wood specific gravity, and AWB of trees ≥10 cm dbh in 16 plots totalling an area of 1 ha in a seasonally inundated riparian forest of the lower Miranda River, southern Pantanal, Brazil. The 443 tree individuals belonged to 46 species. Four species (Inga vera, Ocotea suaveolens, Tabebuia heptaphylla and Cecropia pachystachya) comprised more than 50% of the Total Importance Values (TIV), and floristic similarities between the plots averaged 38%. Although we detected an overall increase in species diversity correlated with decreasing flood levels, the most important tree species had almost identical distribution patterns along the flooding gradient. The stand basal area per plot (±?s.d.) amounted to 3.0?±?1.1 m² (47.8?±?18.1 m²/ha), and the tree heights averaged 10.9?±?1.4 m. Multiplying the individual basal areas by individual tree heights and a form factor of 0.6, we estimated the aboveground wood volume (AWV) for each individual, and for each plot (24.4?±?11.7 m³, 391.1?±?188 m³/ha). Wood specific gravity (SG) varied between 0.39 g/cm³ (Cecropia pachystachya) and 0.87 g/cm³ (Tabebuia heptaphylla), with a stand level average of 0.63?±?0.12 g/cm³. Multiplying the individual AWV with species SG, we estimated the plot AWB to be 16.2?±?6.4 Mg (259.4?±?102 Mg/ha). This value is comparable to that reported for late-successional forest stands of Amazonian floodplain forests, and it is close to the worldwide tropical average AWB. Because tree heights in the present forest were comparatively low when compared to other Neotropical forests, we found that resprouting of stems accounted for comparatively high basal areas. We argue that stem resprouting is an adaptation of tree species originating in non-flooded Cerrado to the seasonal inundations of riparian forests.     

Gross primary productivity of phytoplankton and planktonic respiration in inland floodplain wetlands of southeast Australia: habitat-dependent patterns and regulating processes

Gross primary productivity (GPP) of phytoplankton and planktonic respiration (PR) (i.e., planktonic metabolism) are critical pathways for carbon transformation in many aquatic ecosystems. In inland floodplain wetlands with variable inundation regimes, quantitative measurements of GPP and PR are rare and their relationships with wetland environmental conditions are largely unknown. We measured PR and the GPP of phytoplankton using light and dark biological oxygen demand bottles in open waters of channel and non-channel floodplain habitats of inland floodplain wetlands of southeast Australia that had been inundated by environmental water. Overall, GPP varied from 3.7 to 405.5 mg C m^?3 h^?1 (mean ± standard error: 89.4 ± 9.2 mg C m^?3 h^?1, n = 81), PR from 1.5 to 251.6 mg C m^?3 h^?1 (43.2 ± 5.6 mg C m^?3 h^?1, n = 81), and GPP/PR from 0.2 to 15.6 (3.0 ± 0.3, n = 81). In terms of wetland environmental conditions, total nitrogen (TN) ranged from 682.0 to 14,700.0 mg m^?3 (mean ± standard error: 2,643.0 ± 241.6 mg m^?3, n = 81), total phosphorus (TP) from 48.0 to 1,405.0 mg m^?3 (316.8 ± 31.4 mg m^?3, n = 81), and dissolved organic carbon (DOC) from 1.9 to 46.3 g m^?3 (22.0 ± 1.6 g m^?3, n = 81). Using ordinary least-squares multiple regression analyses, the rates of GPP and PR, and their ratio (GPP/PR) were modeled as a function of TN, TP, and DOC that had been measured concomitantly. The “best” models predicted GPP and GPP/PR ratio in channel habitats as a function of DOC; and GPP, PR, and GPP/PR in non-channel floodplain habitats as a function of TN and/or TP. The models explained between 46 and 74 % of the variance in channel habitats and between 17 and 87 % of the variance in non-channel floodplain habitats. Net autotrophy (mean GPP/PR 3.0) of planktonic metabolism in our work supports the prevailing view that wetlands are a net sink for carbon dioxide. We propose a nutrient-DOC framework, combined with hydrological and geomorphological delineations, to better predict and understand the planktonic metabolism in inland floodplain wetlands.     

Preliminary dose estimation from indoor radon for the medical staff of Radiation Oncology and Nuclear Medicine

The aim of this preliminary study was to measure the indoor radon activity concentration in the houses and offices of Radiation Oncology and Nuclear Medicine staff at Dokuz Eylül University and to assess the results from a radiological perspective. LR-115 type II solid-state nuclear track detectors were installed in the homes and hospital and were exposed for 2 months. LR-115 type II detectors were etched for 90 min in 10% (2.5 M) NaOH solution at 60°C and radon activity concentration was determined from observed microscopic track densities. It was observed that measured indoor radon concentration ranged between 18 and 624 Bq/m³ with a geometric mean of 95 Bq/m³ in hospital, and between 22 and 560 Bq/m³ with a geometric mean of 129 Bq/m³ in homes. Estimates of the annual effective dose received by medical staff who participated in the study ranged between 0.76 and 8.79 mSv. On average, the hospital building contributed 41% to the annual effective dose. The reported values for radon concentrations and the corresponding estimated annual effective equivalent doses were within the limits recommended by the International Commission on Radiological Protection as well as the Turkish Atomic Energy Commission recommended limits for workplaces and houses.     

Radionuclides content in grape molasses soil samples from Central Black Sea region of Turkey

The activity concentrations of radionuclides in grape molasses soil samples collected from Zile (Tokat) plain in the Central Black Sea region of Turkey were measured by using gamma spectrometer with a NaI(Tl) detector. Also, the concentrations of ²²²Rn in soil samples and air were estimated essentially taking the activity concentrations of ²²⁶Ra measured in soil samples. Grape molasses soil samples with calcium carbonate content are used for sedimentation for making molasses in this region. The average activity concentrations of ²³²Th, ²²⁶Ra, ⁴⁰K, and ¹³⁷Cs were found as 62 ± 2, 68 ± 3, 479 ± 35, and 8.0 ± 0.3 Bq kg^?1, respectively. The average concentrations of ²²²Rn in soil samples and air were estimated to be 50 kBq m^?3 and 144 Bq m^?3. From the activity concentrations, absorbed gamma dose rate in outdoor air (D), annual effective dose from external exposure (E_E), annual effective dose from inhalation of radon (E_I), and excess lifetime cancer risk (ELCR) were estimated in order to assess radiological risks. The average values of D, E_E, E_I, and ELCR were found to be 90 nGy h^?1, 110 μSv y^?1, 1360 μSv y^?1, and 4 × 10^?4, respectively.     

Study of radon/thoron exhalation rate,soil-gas radon concentration,and assessment of indoor radon/thoron concentration in Siwalik Himalayas of Jammu & Kashmir

In the present study, the soil-gas radon concentration was assessed at different depth intervals, i.e., 15 cm, 30 cm, 60 cm, and 100 cm from the 30 villages of Jammu &; Kashmir, India using RAD7, an electrostatic solid state alpha detector. The radon mass exhalation and thoron surface exhalation rate has also been measured in the selected 18 soil samples out of 30 of different grain sizes (i.e., 1 mm, 300 µm, 150 µm). The active radon and thoron concentrations were also assessed in the 20 villages. Both the exhalation rates and active radon/thoron concentration were measured using SMART Rn Duo, a portable radon monitor. The average values of soil-gas radon concentration were 210 ± 84 Bq m^?3, 1261 ± 963 Bq m^?3, 4210 ± 1994 Bq m^?3, and 671 ± 305 Bq m^?3 at the depth intervals of 15 cm, 30 cm, 60 cm, and 100 cm, respectively. The exhalation rate of radon and thoron from soil was found to decrease with the increase of grain size, as smaller soil particles make relatively more contribution to radon and thoron exhalations from the ground surface than larger soil particles. The measured Pearson's correlation coefficient was obtained as statistically significant between different quantities under two-tailed test.     

Production enhancement of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in Halogeometricum borinquense,characterization of the bioplastic and desalination of the bioreactor effluent

Polyhydroxyalkanoates (PHAs) are a replacement of conventional single-use plastics. Bioprocess conditions of the extreme halophilic archaeon Halogeometricum borinquense strain RM-G1 were selected resulting in the synthesis of 66.80 ± 1.69 % PHA (of cell dry mass) in 72 h using glycerol and tryptone as carbon and nitrogen sources respectively, yielding volumetric productivity of 0.206 ± 0.006 gL⁻¹ h⁻¹ in a repeated batch process in a small-scale bioreactor where 20 % of the production medium was used as the inoculum for the subsequent batch. The purified PHA was characterized as poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with 10.21 mol% 3-hydroxyvalerate content possessing glass transition temperature -12.6 °C, degradation temperature 285 °C, number average molecular weight 156,899 Da, weight average molecular weight 288,723 Da, polydispersity index 1.8 and melting temperatures 139.1 °C and 152.5 °C. Maximum (21.7 ± 0.6 L m^-2 h⁻¹) and average (17.2 ± 0.6 L m^-2 h⁻¹) flux values were their respective highest and crystallization time was its least (3.0 ± 0.16 h) when ΔT was 90 °C and polytetrafluoroethylene membrane was applied for desalination of the bioreactor effluent by Direct Contact Membrane Distillation. While using polyvinylidene fluoride membrane, maximum 25.5 ± 0.5 L m^-2 h⁻¹ and average 18.6 ± 0.2 L m^-2 h⁻¹ fluxes were obtained and crystallization time decreased (3.25 ± 0.16 h) even when ΔT was lowered by 20 °C.     

Occupational hazard exposures and health risks at wooden toys industry in Southern Thailand

Abstract

The paper aims to examine occupational hazard exposures and health risks in wooden toys processing industry in the Southern Thailand. A walk-through survey was conducted as well as environmental and personal dust sampling measurements were performed during June 2015–January 2016. A cross-sectional study was conducted among 704 workers. Environmental and personal noise and wood dust samplings (NIOSH method 0500 and 0600) were conducted. The workers were exposed to wood dust at levels of 0.4581?mg/m³ for total dust (SD = 0.4391) and 1.111?mg/m³ for respirable dust (SD = 0.3450), respectively. The pulmonary defects among male had higher prevalence than female the (OR = 1.49; 95%CI = 0.97–2.29). Aged group <25 years old had significant lower than aged group >40 years old for almost twice (OR = 0.48). Male workers were significantly at lower risk for noise-induced hearing loss (NIHL) than females (OR = 0.54; 95%CI = 0.34–0.84). This study provides evidence that pulmonary defects among aged group <25 years old had significant lower than aged group >40 years old (p?=?.026). Male workers were significantly at lower risk for NIHL than females (p?=?.006).     

Spatial and temporal dynamics of diffusive methane emissions in the Okavango Delta,northern Botswana,Africa

Global warming is associated with the continued increase in the atmospheric concentrations of greenhouse gases; carbon dioxide, methane (CH₄) and nitrous oxide. Wetlands constitute the largest single natural source of atmospheric CH₄ in the world contributing between 100 and 231 Tg year^?1 to the total budget of 503–610 Tg year^?1, approximately 60 % of which is emitted from tropical wetlands. We conducted diffusive CH₄ emission measurements using static chambers in river channels, floodplains and lagoons in permanent and seasonal swamps in the Okavango Delta, Botswana. Diffusive CH₄ emission rates varied between 0.24 and 293 mg CH₄ m^?2 h^?1, with a mean (±SE) emission of 23.2 ± 2.2 mg CH₄ m^?2 h^?1 or 558 ± 53 mg CH₄ m^?2 day^?1. These emission rates lie within the range reported for other tropical wetlands. The emission rates were significantly higher (P < 0.007) in permanent than in seasonal swamps. River channels exhibited the highest average fluxes at 31.3 ± 5.4 mg CH₄ m^?2 h^?1 than in floodplains (20.4 ± 2.5 mg CH₄ m^?2 h^?1) and lagoons (16.9 ± 2.6 mg CH₄ m^?2 h^?1). Diffusive CH₄ emissions in the Delta were probably regulated by temperature since emissions were highest (20–300 mg CH₄ m^?2 h^?1) and lowest (0.2–3.0 mg m^?2 h^?1) during the warmer-rainy and cooler winter seasons, respectively. Surface water temperatures between December 2010 and January 2012 varied from 15.3 °C in winter to 33 °C in summer. Assuming mean inundation of 9,000 km², the Delta’s annual diffusive emission was estimated at 1.8 ± 0.2 Tg, accounting for 2.8 ± 0.3 % of the total CH₄ emission from global tropical wetlands.     

Biological versus geochemical control and environmental change drivers of the base metal budgets of a tropical montane forest in Ecuador during 15 years

To assess the susceptibility of the base metal budget of a remote tropical montane forest in Ecuador to environmental change, we determined the extent of biological control of base metal fluxes and explored the impact of atmospheric inputs and precipitation, considered as potential drivers of ecosystem change, on the base metal fluxes. We quantified all major base metal fluxes in a ca. 9.1 ha forested catchment from 1998 to 2013. Mean (±s.d.) annual flux to the soil via throughfall + stemflow + litterfall was 13800 ± 1500 mg m^?2 Ca, 19000 ± 1510 mg m^?2 K, 4690 ± 619 mg m^?2 Mg and 846 ± 592 mg m^?2 Na of which 22 ± 6, 45 ± 16, 39 ± 10 and 84 ± 33%, respectively, were leached to below the organic layer. The mineral soil retained 79–94% of this Ca, K and Mg, while Na was released. Weathering rates estimated with three different approaches ranged from not detected (ND) to 504 mg m^?2 year^?1 Ca, ND-1770 mg m^?2 year^?1 K, 287–597 mg m^?2 year^?1 Mg and 403–540 mg m^?2 year^?1 Na. The size of mainly biologically controlled aboveground fluxes of Ca, K and Mg was 1–2 orders of magnitude larger than that of mainly geochemically controlled fluxes (sorption to soil and weathering). The elemental catchment budgets (total deposition ? streamflow) were positive for Ca (574 ± 893 mg m^?2) and K (1330 ± 773 mg m^?2), negative for Na (?370 ± 1300 mg m^?2) and neutral for Mg (1.89 ± 304 mg m^?2). Our results demonstrate that biological processes controlled element retention for Ca, K and Mg in the biological part of the ecosystem. This was different for Na, which was mainly released by weathering from the study catchment, while the biological part of the ecosystem was Na-poor. The deposition of base metals was the strongest driver of their budgets suggesting that the base metal cycling of the study ecosystem is susceptible to changing deposition.     

Start-up and operation strategies on the liquefied food waste anaerobic digestion and a full-scale case application

Batch anaerobic digestion was employed to investigate the efficient start-up strategies for the liquefied food waste, and sequencing batch digestion was also performed to determine maximum influent organic loading rate (OLR) for efficient and stable operation. The results indicated that the start-up could be well improved using appropriate wastewater organic load and food-to-microorganism ratios (F/M). When digestion was initialized at low chemical oxygen demand (COD) concentration of 20.0 gCOD L^?1, the start-up would go well using lower F/M ratio of 0.5–0.7. The OLR 7.0 gCOD L^?1 day^?1 was recommended for operating the ASBR digestion, in which the COD conversion of 96.7 ± 0.53 % and biomethane yield of 3.5 ± 0.2 L gCOD^?1 were achieved, respectively. The instability would occur when OLR was higher than 7.0 gCOD L^?1 day^?1, and this instability was not recoverable. Lipid was suggested to be removed before anaerobic digestion. The anaerobic digestion process in engineering project ran well, and good performance was achieved when the start-up and operational strategies from laboratory study were applied. For case application, stable digestion performance was achieved in a digester (850 m³ volume) with biogas production of 1.0–3.8 m³ m^?3 day^?1.