Linking vertebral number to performance of aquatic escape responses in the axolotl (Ambystoma mexicanum)

Environmental conditions during early development in ectothermic vertebrates can lead to variation in vertebral number among individuals of the same species. It is often seen that individuals of a species raised at cooler temperatures have more vertebrae than individuals raised at warmer temperatures, although the functional consequences of this variation in vertebral number on swimming performance are relatively unclear. To investigate this relationship, we tested how vertebral number in axolotls (Ambystoma mexicanum) affected performance of aquatic escape responses (C-starts). Axolotls were reared at four temperatures (12–24 °C) encompassing their natural thermal range and then transitioned to a mean temperature (18 °C) three months before C-starts were recorded. Our results showed variation in vertebral number, but that variation was not significantly affected by developmental temperature. C-start performance among axolotls was significantly correlated with caudal vertebral number, and individuals with more caudal vertebrae were able to achieve greater curvature more quickly during their responses than individuals with fewer vertebrae. However, our results show that these individuals did not achieve greater displacements or velocities, and that developmental temperature did not have any effect on C-start performance. We highlight that the most important aspects of escape swim performance (i.e., how far individuals get from a threat and how quickly they move the most important parts of the body away from that threat) are consistent across individuals regardless of developmental temperature and morphological variation.     

Estimation of optimal matching position for orthogonal kV setup images and minimal setup margins in radiotherapy of whole breast and lymph node areas

AimThe aim was to find an optimal setup image matching position and minimal setup margins to maximally spare the organs at risk in breast radiotherapy.BackgroundRadiotherapy of breast cancer is a routine task but has many challenges. We investigated residual position errors in whole breast radiotherapy when orthogonal setup images were matched to different bony landmarks.Materials and methodsA total of 1111 orthogonal setup image pairs and tangential field images were analyzed retrospectively for 50 consecutive patients. Residual errors in the treatment field images were determined by matching the orthogonal setup images to the vertebrae, sternum, ribs and their compromises. The most important region was the chest wall as it is crucial for the dose delivered to the heart and the ipsilateral lung. Inter-observer variation in online image matching was investigated.ResultsThe best general image matching position was the compromise of the vertebrae, ribs and sternum, while the worst position was the vertebrae alone (p ≤ 0.03). The setup margins required for the chest wall varied from 4.3 mm to 5.5 mm in the lung direction while in the superior–inferior (SI) direction the margins varied from 5.1 mm to 7.6 mm. The inter-observer variation increased the minimal margins by approximately 1 mm. The margin of the lymph node areas should be at least 4.8 mm.ConclusionsSetup margins can be reduced by proper selection of a matching position for the orthogonal setup images. To retain the minimal margins sufficient, systematic error of the chest wall should not exceed 4 mm in the tangential field image.     

The impact of heavy metals on the activity of some enzymes along the barley root

Barley seedlings 48 h after the onset of germination on filter paper treated for 24 h by 1 mM cadmium (Cd), 3 mM nickel (Ni) or 0.5 mM mercury (Hg) showed similar approximately 45% root growth inhibition. Although root growth inhibition was similar, loss of cell viability evaluated, as Evans blue uptake was distinct among Cd, Ni and Hg treated roots. While Cd and Hg caused cell death along the whole barley root (0–8 mm), Ni induced significant loss of cell viability only in root cells 6–8 mm distance from the root tip. Our results suggest that different metabolic processes are activated in different parts of barley root in relation to distance from the root tip during heavy metal (HM) treatment. Some of them are characteristic for several HMs such as inhibition of ascorbic acid oxidase or glutathione-S-transferase stimulation, while others are specific for individual HMs, e.g. activation of acid phosphatase and lipoxygenase by Cd and Hg, or inhibition of ascorbate peroxidase by Ni and Hg treatment.     

Structure of the femora and autotomous (postpygal) caudal vertebrae in the three-toed skink Chalcides chalcides (Reptilia: Squamata: Scincidae) and its applicability for age and growth rate determination

The limbs of the three-toed skink Chalcides chalcides are reduced to such a degree that the three digits are too small for skeletochronology. This study, performed on animals collected near Isernia (central Italy), describes the structure of the caudal vertebrae, which are often naturally lost due to autotomy, in order to determine whether they can be used to obtain data on age and growth with skeletochronological techniques. The reliability of the autotomous caudal vertebrae for skeletochronology was verified by performing skeletochronological analyses also on femora. Although the identification of the lines of arrested growth (LAGs) was easier in femora than in autotomous caudal vertebrae, a high correspondence of the LAG count between the two bones was observed. Females were larger and lived longer than males (4 and 3 years, respectively). For both sexes, the snout vent length (SVL) was significantly correlated with age. For both sexes, sexual maturity was attained after two hibernations from birth, beginning at the 20th month of age. At first reproduction, males had an SVL of 91–106 mm and females one of 111–150 mm. Von Bertalanffy growth curves of age versus SVL showed that females had slower growth rates than males for attaining their asymptotic SVL (females: 197 mm; males: 143 mm). The results provide the first data on age and growth of C. chalcide, and show that autotomous caudal vertebrae are reliable alternatives for obtaining such data for limb-reduced reptiles, avoiding the need to sacrifice or disable animals, as occurs when long bones are used.     

Impact of physiological breathing motion for breast cancer radiotherapy with proton beam scanning – An in silico study

This study investigates the impact of breathing motion on proton breast treatment plans. Twelve patients with CT datasets acquired during breath-hold-at-inhalation (BHI), breath-hold-at-exhalation (BHE) and in free-breathing (FB) were included in the study. Proton plans were designed for the left breast for BHI and subsequently recalculated for BHE or designed for FB and recalculated for the extreme breath-hold phases. The plans were compared from the point of view of their target coverage and doses to organs-at-risk. The median amplitude of breathing motion determined from the positions of the sternum was 4.7 mm (range 0.5–14.6 mm). Breathing motion led to a degradation of the dose coverage of the target (heterogeneity index increased from 4–7% to 8–11%), but the degraded values of the dosimetric parameters of interest fulfilled the clinical criteria for plan acceptance. Exhalation decreased the lung burden [average dose 3.1–4.5 Gy (RBE)], while inhalation increased it [average dose 5.8–6.8 Gy (RBE)]. The individual values depended on the field arrangement. Smaller differences were seen for the heart [average dose 0.1–0.2 Gy (RBE)] and the LAD [1.9–4.6 Gy (RBE)]. Weak correlations were generally found between changes in dosimetric parameters and respiratory motion. The differences between dosimetric parameters for various breathing phases were small and their expected clinical impact is consequently quite small. The results indicated that the dosimetric parameters of the plans corresponding to the extreme breathing phases are little affected by breathing motion, thus suggesting that this motion might have little impact for the chosen beam orientations with scanned proton beams.     

Simultaneous determination of tryptophan and kynurenine in plasma samples of children patients with Kawasaki disease by high-performance liquid chromatography with programmed wavelength ultraviolet detection

A simple, fast, sensitive and specific high-performance liquid chromatography (HPLC) method is developed for simultaneous determination of kynurenine (Kyn) and tryptophan (Trp) with ultraviolet (UV) detection setting programmed wavelength. The separation was carried out on an Agilent Hypersil ODS column (125 mm × 4.0 mm, 5 μm) in less than 6 min and the eluate was monitored by the programmed wavelength detection setting at 360 nm from 0 min to 4 min for Kyn, and at 278 nm from 4 min to 6 min for Trp in a single run with UV detector. The linearities of the method were from 0.20 μmol/L to 21.2 μmol/L for Kyn and 2.25–678.0 μmol/L for Trp, and the detection limits were 0.028 μmol/L for Kyn and 0.053 μmol/L for Trp, respectively. Satisfactory precisions and recoveries were obtained by this method. The assay was employed to analyze plasma samples of children patients with Kawasaki disease (KD). The result showed great difference between Kawasaki disease and control group.     

Effects of remedies made in patient setup process on residual setup errors and margins in head and neck cancer radiotherapy based on 2D image guidance

AimPatient setup errors were aimed to be reduced in radiotherapy (RT) of head-and-neck (H&N) cancer. Some remedies in patient setup procedure were proposed for this purpose.BackgroundRT of H&N cancer has challenges due to patient rotation and flexible anatomy. Residual position errors occurring in treatment situation and required setup margins were estimated for relevant bony landmarks after the remedies made in setup process and compared with previous results.Materials and methodsThe formation process for thermoplastic masks was improved. Also image matching was harmonized to the vertebrae in the middle of the target and a 5 mm threshold was introduced for immediate correction of systematic errors of the landmarks. After the remedies, residual position errors of bony landmarks were retrospectively determined from 748 orthogonal X-ray images of 40 H&N cancer patients. The landmarks were the vertebrae C1–2, C5–7, the occiput bone and the mandible. The errors include contributions from patient rotation, flexible anatomy and inter-observer variation in image matching. Setup margins (3D) were calculated with the Van Herk formula.ResultsSystematic residual errors of the landmarks were reduced maximally by 49.8% (p ≤ 0.05) and the margins by 3.1 mm after the remedies. With daily image guidance the setup margins of the landmarks were within 4.4 mm, but larger margins of 6.4 mm were required for the mandible.ConclusionsRemarkable decrease in the residual errors of the bony landmarks and setup margins were achieved through the remedies made in the setup process. The importance of quality assurance of the setup process was demonstrated.     

Warneckea parvifolia (Melastomataceae–Olisbeoideae), a new “sand-forest” endemic from northeastern KwaZulu-Natal (South Africa) and southernmost Mozambique,and a phylogenetic analysis of eastern and southern African representatives of W. section Warneckea

Warneckea populations from “sand-forest” or “sand-thicket” habitats in Tembe Elephant Park, South Africa, and Licuati Forest Reserve in adjacent southern Mozambique were previously thought to be a small-leaved form of W. sousae, which typically includes larger-leaved plants ranging from central Mozambique northward to Tanzania. We examine this hypothesis using molecular and morphological evidence. Maximum-likelihood phylogenetic analysis of combined nrDNA ETS and ITS sequence data failed to resolve W. sousae and the Maputaland populations as an exclusively monophyletic group. Instead, the Kenyan endemic W. mouririifolia was strongly supported as the sister species of W. sousae, and the Maputaland plants were resolved in a separate, strongly supported clade together with populations of an as-yet undetermined Warneckea species from northern Mozambique. A hypothesis of exclusive monophyly for the plants from Tembe and Licuati had moderate support in separate ETS and ITS1 analyses (bootstrap proportions of 88% and 81%, respectively). Statistically significant differences in leaf dimensions and internode length were found between the Maputaland plants and typical W. sousae. We conclude that the populations from Tembe and Licuati represent a distinct species, which we describe as W. parvifolia. The species differs from W. sousae in having shorter internodes (mostly 5–25 mm not 10–60 mm long), smaller leaves (mostly 14–32 × 8–19 mm not 40–76 × 22–52 mm), shorter petioles (mostly 1–1.5 mm not 1.5–6 mm long), smaller flowers (hypanthium 1 × 1.5–1.75 mm not 1.5–2 × 2 mm; calyx lobes 0.5 mm not 0.75 mm long; staminal filaments 3–4 mm not 5 mm long; style 4–5 mm not 9 mm long), and globose fruit (not obovoid). An IUCN conservation status of Endangered (EN) B1a, b(ii, iii) is indicated for W. parvifolia, due to its limited distribution and projected declines in its habitat quality and area of occupancy.     

Effects of eight different ligament property datasets on biomechanics of a lumbar L4-L5 finite element model

Ligaments assist trunk muscles in balancing external moments and providing spinal stability. In absence of the personalized material properties for ligaments, finite element (FE) models use dispersed data from the literature. This study aims to investigate the relative effects of eight different ligament property datasets on FE model responses. Eight L4-L5 models distinct only in ligament properties were constructed and loaded under moment (15 N m) alone or combined with a compressive follower load (FL). Range of motions (RoM) of the disc-alone model matched well in vitro data. Ligament properties significantly affected only sagittal RoMs (∼3.0–7.1° in flexion and ∼3.8–5.8° in extension at 10 N m). Sequential removal of ligaments shifted sagittal RoMs in and out of the corresponding in vitro ranges. When moment was combined with FL, center of rotation matched in vivo data for all models (3.8 ± 0.9 mm and 4.3 ± 1.8 mm posterior to the disc center in flexion and extension, respectively). Under 15 N m sagittal moments, ligament strains were often smaller or within the in vitro range in flexion whereas some posterior ligament forces approached their failure forces in some models. Ligament forces varied substantially within the models and affected the moment-sharing and internal forces on the disc and facet joints. Intradiscal pressure (IDP) had the greatest variation between models in extension. None of the datasets yielded results in agreement with all reported measurements. Results emphasized the important role of ligaments especially under larger moments and the need for their accurate representation in search for valid spinal models.     

Distal skeletal tibia assessed by HR-pQCT is highly correlated with femoral and lumbar vertebra failure loads

Dual energy X-ray absorptiometry (DXA) is the standard for assessing fragility fracture risk using areal bone mineral density (aBMD), but only explains 60–70% of the variation in bone strength. High-resolution peripheral quantitative computed tomography (HR-pQCT) provides 3D-measures of bone microarchitecture and volumetric bone mineral density (vBMD), but only at the wrist and ankle. Finite element (FE) models can estimate bone strength with 86–95% precision. The purpose of this study is to determine how well vBMD and FE bone strength at the wrist and ankle relate to fracture strength at the hip and spine, and to compare these relationships with DXA measured directly at those axial sites. Cadaveric samples (radius, tibia, femur and L4 vertebra) were compared within the same body. The radius and tibia specimens were assessed using HR-pQCT to determine vBMD and FE failure load. aBMD from DXA was measured at the femur and L4 vertebra. The femur and L4 vertebra specimens were biomechanically tested to determine failure load. aBMD measures of the axial skeletal sites strongly correlated with the biomechanical strength for the L4 vertebra (r = 0.77) and proximal femur (r = 0.89). The radius correlated significantly with biomechanical strength of the L4 vertebra for vBMD (r = 0.85) and FE-derived strength (r = 0.72), but not with femur strength. vBMD at the tibia correlated significantly with femoral biomechanical strength (r = 0.74) and FE-estimated strength (r = 0.83), and vertebral biomechanical strength for vBMD (r = 0.97) and FE-estimated strength (r = 0.91). The higher correlations at the tibia compared to radius are likely due to the tibia’s weight-bearing function.     

Respiratory motion of adrenal gland metastases: Analyses using four-dimensional computed tomography images

PurposeTo evaluate the respiratory motion of adrenal gland metastases in three-dimensional directions using four-dimensional computed tomography (4DCT) images.MethodsFrom January 2013 to May 2016, 12 patients with adrenal gland metastases were included in this study. They all underwent 4DCT scans to assess respiratory motion of adrenal gland metastases in free breathing state. The 4DCT images were sorted into 10 image series according to the respiratory phase from the end inspiration to the end expiration, and then transferred to FocalSim workstation. All gross tumor volumes (GTVs) of adrenal gland metastases were drawn by a single physician and confirmed by a second. Relative coordinates of adrenal gland metastases were automatically generated to calculate adrenal gland metastases motion in different axial directions.ResultsThe average respiratory motion of adrenal gland metastases in left-right (LR), cranial-caudal (CC), anterior-posterior (AP), 3-dimensional (3D) vector directions was 3.4 ± 2.2 mm, 9.5 ± 5.5 mm, 3.8 ± 2.0 mm and 11.3 ± 5.3 mm, respectively. The ratios were 58.6% ± 11.4% and 63.2% ± 12.5% when the volumes of GTV_In0% and GTV _In100% were compared with volume of IGTV_10phase. The volume ratio of IGTV_10phase to GTV_3D was 1.73 ± 0.48.ConclusionsAdrenal gland metastasis is a respiration-induced moving target, and an internal target volume boundary should be provided when designing the treatment plan. The CC motion of adrenal gland metastasis is predominant and >5 mm, thus motion management strategies are recommended for patients undergoing external radiotherapy for adrenal gland metastasis.     

Diatom taxa and assemblages for establishing nutrient criteria of lakes with anthropogenic hydrologic alteration

Stressor-response models offer guidance for concentration-based nutrient criteria in lakes under human intervention. Diatom-based statistics from biological responses were incorporated to derive taxon-specific and community-level change points (thresholds) of phosphorous and nitrogen in 77 Yangtze floodplain lakes. Diatom metrics relating with conductivity were adopted as response variables, since conductivity explained the maximum variation (38.1%) in diatom assemblages via Bootstrapped regression trees. Nonparametric change-point analysis and Threshold Indicator Taxa ANalysis showed threshold responses of diatom community structure at 0.05–0.08 mg TP/L in connected lakes and 0.02–0.04 mg TP/L in isolated lakes. Distinct community change points of sensitive diatoms occurred at 0.96–1.63 mg TN/L in connected lakes and 0.52–0.63 mg TN/L in isolated lakes. Diatom community structures of tolerant taxa were substantially altered beyond 0.22–0.23 mg/L in connected lakes and 0.52–0.69 mg NO_x/L in isolated lakes. Hydrological river-lake connectivity differed significantly in ecological nutrient criteria with more TN/TP criteria and less NO_x criteria in connected lakes. Given the ecological significance and biological integrity, diatom-based statistics can provide more reliable change points (thresholds) for nutrient criteria than Chl a-nutrient relationships.     

Prediction of joint center location by customizable multiple regressions: Application to clavicle,scapula and humerus

Accurate spatial location of joint center (JC) is a key issue in motion analysis since JC locations are used to define standardized anatomical frames, in which results are represented. Accurate and reproducible JC location is important for data comparison and data exchange. This paper presents a method for JC locations based on the multiple regression algorithms without preliminary assumption on the behavior of the joint-of-interest. Regression equations were obtained from manually palpable ALs on each bone-of-interest. Results are presented for all joint surfaces found on the clavicle, scapula and humeral bone. Mean accuracy errors on the JC locations obtained on dry bones were 5.2±2.5 mm for the humeral head, 2.5±1.1 mm for the humeral trochlea, 2.3±0.9 mm for the humeral capitulum, 8.2±3.9 mm for the scapula glenoid cavity, 7.2±3.2 mm for the scapular aspect of the acromio-clavicular joint, 3.5±1.8 mm for the clavicular aspect of the sternoclavicular joint and 3.2±1.4 mm for the clavicular aspect of the acromio-clavicular joint. In-vitro and in-vivo validation accuracy was 5.3 and 8.5 mm, respectively, for the humeral head center location. Regression coefficients for joint radius dimension and joint surface orientation were also processed and reported in this paper.     

Low-grade inflammation markers in children and adolescents: Influence of anthropometric characteristics and CRP and IL6 polymorphisms

Overweight and obesity are associated with chronic and subclinical inflammation due to an imbalance of inflammatory mediators. However, the association with gene polymorphism has been rarely studied in children. The aim of this study was to determine if serum concentrations of C-reactive protein (CRP) and interleukin-6 (IL-6) are related to the IL6 rs1800795, IL6 rs2069845 and CRP rs1205 polymorphisms (SNPs) according to body mass index (BMI) in a sample of children and adolescents. A cross-sectional study in 470 students between 7 and 17 years of age of anthropometric characteristics, high sensitivity-CRP (Hs-CRP) and IL-6 levels and three SNPs genotyped. The prevalence ratio of hs-CRP > 3 mg/L in obese individuals was 4.15 (CI 2.43–7.06; p = 0.01), and it was 1.91 (CI 1.03–3.55; p = 0.03) in overweight individuals and 1.74 (CI 1.05–2.88 p = 0.03) in females. Individuals with waist circumference (WC) and body fat percentage (BF%) alterations showed elevated levels of hs-CRP (p = 4.3 × 10⁻⁵ and p = 5.3 × 10⁻⁶). The combination of any two anthropometric measurement increases CRP levels, especially combinations with obesity body mass index (BMI): BMI + WC and BMI + BF%. Among the overweight/obesity group, T allele carriers of CRP rs1205 showed lower levels of hs-CRP (0.5, IQR = 0.3–1.8 mg/L) than CC homozygotes (1.5, IQR = 0.4–3.4 mg/L, p = 0.018). Additionally, considering subjects with two or three anthropometric alterations for CRP rs1205: rs1205 T allele carriers had lower levels of hs-CRP (0.7, IQR = 0.3–2.7 mg/L) than CC homozygotes (1.2, IQR = 0.5–3.5 mg/L, p = 0.02). In conclusion, carriers of the rs1205/T allele with higher BMIs had lower levels of hs-CRP. Schoolchildren who were overweight/obese had higher levels of CRP and IL-6, whereas individuals with WC and BF% alterations had higher levels of CRP.     

Effect of image quality on correlation modeling error using a fiducial marker in a gimbaled linear accelerator

The purpose of this study was to investigate the effect of image quality under various imaging parameters (60, 70, 80, 90, 100, 110, and 120 kV at 200 mA and 10 ms/63, 80, 100, 160, 200, 250, and 320 mA at 120 kV and 10 ms) and the diameter of the fiducial marker (0.25, 0.50, 0.75, and 1.10 mm) on the correlation modeling error for dynamic tumor tracking (DTT) in the Vero4DRT system. Each fiducial marker was inserted into the center of the 30 × 30 × 10 cm³ water-equivalent phantom. A programmable respiratory motion table was used to simulate breathing-induced organ motion, with an amplitude of ±20 mm and a breathing cycle of 4 s. The correlation modeling error was calculated from the absolute difference between the detected and predicted target positions in the cranio-caudal direction. The image contrast of the fiducial marker was enhanced with increasing kV and mA. Increasing the diameter of the fiducial marker also enhanced the image contrast. Correlation-modeling error does not depend on the image quality and fiducial marker diameter. A lower kV setting did not generate a 4D model due to poor image contrast. All fiducial marker diameters were identified as good candidates for DTT in the Vero4DRT system.     

Unweighted state as a sidestep preparation improve the initiation and reaching performance for basketball players

The preparatory motion of a defensive motion in contact sport such as basketball should be small and involve landing on both feet for strict time and motion constraints. We thus proposed the movement creating a unweighted state. Ten basketball players performed a choice reaction sidestepping task with and without the voluntary, continuous vertical fluctuation movement. The results indicated that the preparatory movement shortened the time of their sidestep initiation (301 vs. 314 ms, p = 0.011) and reaching performance (883 vs. 910 ms, p = 0.018) but did not increase their peak ground reaction force or movement velocity. The mechanism of the improvement was estimated to be the following: in the preparation phase, the vertical body fluctuation created the force fluctuation; after the direction signal, the unweighted state can shorten the time required to initiate the sidestepping (unweighted: 279 ms; weighted: 322 ms, p = 0.002); around the initiation phase, the dropping down of the body and weighted state can contribute to the reaching performance. We conducted additional experiment investigating muscle–tendon-complex dynamics and muscle activity using ultrasound device and electromyography. The result suggests that the building up of active state of muscle might explain the improvement of sidestepping performance.     

The influence of starvation on fast-start performance of Spinibarbus sinensis

Juvenile Spinibarbus sinensis (n = 48, body length, 5.86 ± 0.10 cm, 25 °C) were fasted for 0, 0.5, 1, 2, 4 and 6 weeks. The fast-start performances of the experimental fish were assessed using high-speed video photography and the locomotive kinematics analysis. The morphological parameters including tail height (H₂), tail length (L₂), lateral body area (S₁), median fin area (S₂), dorsal cross section area (S₃) and tail cross section area (S₄) were also measured using TpsDig and the Photoshop. The results showed that 6 week starvation resulted in significant decreases in the escape distance (d), maximum linear velocity (V_max) and maximum linear acceleration (a_max) of center of mass in Stage 1 and Stage 2 of fast-start process (P < 0.05), however there were two relatively sTable phases in the V_max and d, during the week 1–2 (V_max = 0.67 ± 0.06 mm/ms; d = 8.86 ± 0.73 mm) and week 4–6 (V_max = 0.31 ± 0.04 mm/ms; d = 3.70 ± 0.56 mm). When compared with the control group (0 week starvation group), only the 6 week starvation group showed the significantly different response time (t) with average t = 9.20 ± 0.37 ms in week 1–4. There were no significant difference in mass center turning angles at first stage (T_a1) , second stage (T_a2) and the sum of two stages (T_a(1+2)) was also not different (P > 0.05). The fish did not show any directional preference for left or right during escape turning, and all of the related parameters also remained unchanged among treatment group (P > 0.05). The areas of dorsal body cross-section decreased more acutely (P < 0.05) than caudal body cross-section (45.4% vs 38.0%) during the entire starvation period while no significant differences were observed in both the tail height and tail length among all treatment groups (P > 0.05). The results indicated that fast-start performance of juvenile S. sinensis is affected by the starvation; metabolic energy related traits such as the maximum linear velocity and the maximum linear acceleration decreased significantly after starvation; whereas traits with no direct link to metabolic energy such as the response time and turning angle remained unchanged during starvation. The lack of starvation induced change in the maneuverability of the fish suggests that fast-start ability related to escape strategy is relatively well conservative in juvenile S. sinensis.     

The role of anticipatory postural adjustments in compensatory control of posture: 2. Biomechanical analysis

The central nervous system (CNS) utilizes anticipatory (APAs) and compensatory (CPAs) postural adjustments to maintain equilibrium while standing. It is known that these postural adjustments involve displacements of the center of mass (COM) and center of pressure (COP). The purpose of the study was to investigate the relationship between APAs and CPAs from a kinetic and kinematic perspective. Eight subjects were exposed to external predictable and unpredictable perturbations induced at the shoulder level while standing. Kinematic and kinetic data were recorded and analyzed during the time duration typical for anticipatory and compensatory postural adjustments. When the perturbations were unpredictable, the COM and COP displacements were larger compared to predictable conditions with APAs. Thus, the peak of COM displacement, after the pendulum impact, in the posterior direction reached 28 ± 9.6 mm in the unpredictable conditions with no APAs whereas it was 1.6 times smaller, reaching 17 ± 5.5 mm during predictable perturbations. Similarly, after the impact, the peak of COP displacement in the posterior direction was 60 ± 14 mm for unpredictable conditions and 28 ± 3.6 mm for predictable conditions. Finally, the times of the peak COM and COP displacements were similar in the predictable and unpredictable conditions. This outcome provides additional knowledge about how body balance is controlled in presence and in absence of information about the forthcoming perturbation. Moreover, it suggests that control of posture could be enhanced by better utilization of APAs and such an approach could be considered as a valuable modality in the rehabilitation of individuals with balance impairment.     

Accuracy map of an optical motion capture system with 42 or 21 cameras in a large measurement volume

Optical motion capture is commonly used in biomechanics to measure human kinematics. However, no studies have yet examined the accuracy of optical motion capture in a large capture volume (>100 m³), or how accuracy varies from the center to the extreme edges of the capture volume. This study measured the dynamic 3D errors of an optical motion capture system composed of 42 OptiTrack Prime 41 cameras (capture volume of 135 m³) by comparing the motion of a single marker to the motion reported by a ThorLabs linear motion stage. After spline interpolating the data, it was found that 97% of the capture area had error below 200 μm. When the same analysis was performed using only half (21) of the cameras, 91% of the capture area was below 200 μm of error. The only locations that exceeded this threshold were at the extreme edges of the capture area, and no location had a mean error exceeding 1 mm. When measuring human kinematics with skin-mounted markers, uncertainty of marker placement relative to underlying skeletal features and soft tissue artifact produce errors that are orders of magnitude larger than the errors attributed to the camera system itself. Therefore, the accuracy of this OptiTrack optical motion capture system was found to be more than sufficient for measuring full-body human kinematics with skin-mounted markers in a large capture volume (>100 m³).