Tensile properties of rat femoral bone as functions of bone volume fraction, apparent density and volumetric bone mineral density

Mechanical testing has been regarded as the gold standard to investigate the effects of pathologies on the structure-function properties of the skeleton. Tensile properties of cancellous and cortical bone have been reported previously; however, no relationships describing these properties for rat bone as a function of volumetric bone mineral density (ρ(MIN)), apparent density or bone volume fraction (BV/TV) have been reported in the literature. We have shown that at macro level, compression and torsion properties of rat cortical and cancellous bone can be well described as a function of BV/TV, apparent density or ρ(MIN) using non-destructive micro-computed tomographic imaging and mechanical testing to failure. Therefore, the aim of this study is to derive a relationship expressing the tensile properties of rat cortical bone as a function of BV/TV, apparent density or ρ(MIN) over a range of normal and pathologic bones. We used bones from normal, ovariectomized and osteomalacic animals. All specimens underwent micro-computed tomographic imaging to assess bone morphometric and densitometric indices and uniaxial tension to failure. We obtained univariate relationships describing 74-77% of the tensile properties of rat cortical bone as a function of BV/TV, apparent density or ρ(MIN) over a range of density and common skeletal pathologies. The relationships reported in this study can be used in the structural rigidity to provide a non-invasive method to assess the tensile behavior of bones affected by pathology and/or treatment options.     

Combination of topological parameters and bone volume fraction better predicts the mechanical properties of trabecular bone

Trabecular bone structure may complement bone volume/total volume fraction (BV/TV) in the prediction of the mechanical properties. Nonetheless, the direct in vivo use of information pertaining to trabecular bone structure necessitates some predictive analytical model linking structure measures to mechanical properties. In this context, the purpose of this study was to combine BV/TV and topological parameters so as to better estimate the mechanical properties of trabecular bone. Thirteen trabecular bone mid-sagittal sections were imaged by magnetic resonance (MR) imaging at the resolution of 117 x 117x 300 microm(3). Topological parameters were evaluated in applying the 3D-line skeleton graph analysis (LSGA) technique to the binary MR images. The same images were used to estimate the elastic moduli by finite element analysis (FEA). In addition to the mid-sagittal section, two cylindrical samples were cored from each vertebra along vertical and horizontal directions. Monotonic compression tests were applied to these samples to measure both vertical and horizontal ultimate stresses. BV/TV was found as a strong predictor of the mechanical properties, accounting for 89-94% of the variability of the elastic moduli and for 69-86% of the variability of the ultimate stresses. Topological parameters and BV/TV were combined following two analytical formulations, based on: (1) the normalization of the topological parameters; and on (2) an exponential fit-model. The normalized parameters accounted for 96-98% of the variability of the elastic moduli, and the exponential model accounted for 80-95% of the variability of the ultimate stresses. Such formulations could potentially be used to increase the prediction of the mechanical properties of trabecular bone.     

Compressive mechanical properties of rat and pig optic nerve head

Glaucoma is the leading cause of irreversible blindness worldwide. Elevated intraocular pressure (IOP), the primary risk factor for glaucoma, is thought to induce abnormally high strains in optic nerve head (ONH) tissues, which ultimately result in retinal ganglion cell damage and vision loss. The mechanisms by which excessive deformations result in vision loss remain incompletely understood. The ability of computational and in vitro models of the ONH to provide insight into these mechanisms, in many cases, depends on our ability to replicate the physiological environment, which in turn requires knowledge of tissue biomechanical properties. The majority of mechanical data published to date regarding the ONH has been obtained from tensile testing, yet compression has been shown to be the main mode of deformation in the ONH under elevated IOP. We have thus tested pig and rat ONH tissue using unconfined cyclic compression. The material constants C₁, obtained from fitting the stress vs. strain data with a neo-Hookean material model, were 428 [367, 488] Pa and 64 [53, 76] Pa (mean [95% Confidence Interval]) for pig and rat optic nerve head, respectively. Additionally, we investigated the effects of strain rate and tissue storage on C1 values. These data will inform future efforts to understand and replicate the in vivo biomechanical environment of the ONH.     

The effects of bone and pore volume fraction on the mechanical properties of PMMA/bone biopsies extracted from augmented vertebrae

Vertebroplasty forms a porous PMMA/bone composite which was shown to be weaker and less stiff than pure PMMA. It is not known what determines the mechanical properties of such composites in detail. This study investigated the effects of bone volume fraction (BV/TV), cement porosity (PV/(TV-BV), PV…pore volume) and cement stiffness. Nine human vertebral bodies were augmented with either standard or low-modulus PMMA cement and scanned with a HR-pQCT system before and after augmentation. Fourteen cylindrical PMMA/bone biopsies were extracted from the augmented region, scanned with a micro-CT system and tested in compression until failure. Micro-finite element (FE) models of the complete biopsies, of the trabecular bone alone as well as of the porous cement alone were generated from CT images to gain more insight into the role of bone and pores. PV/(TV-BV) and experimental moduli of standard/low-modulus cement (R(2)=0.91/0.98) as well as PV/(TV-BV) and yield stresses (R(2)=0.92/0.83) were highly correlated. No correlation between BV/TV (ranging from 0.057 to 0.138) and elastic moduli was observed (R(2)< 0.05). Interestingly, the micro-FE models of the porous cement alone reproduced the experimental elastic moduli of the standard/low-modulus cement biopsies (R(2)=0.75/0.76) more accurately than the models with bone (R(2)=0.58/0.31). In conclusion, the mechanical properties of the biopsies were mainly determined by the cement porosity and the cement material properties. The study showed that bone tissue inside the biopsies was mechanically "switched off" such that load was carried essentially by the porous PMMA.     

Orientation of mineral in bovine bone and the anisotropic mechanical properties of plexiform bone.

Angular dependent Young's modulus E phi presented by Bonfield and Grynpas [Nature 270, 453-454 (1977)] was simulated by using the distribution function of the orientation of mineral in plexiform bone introduced on the basis of an X-ray pole figure analysis (XPFA) and a small angle X-ray scattering (SAXS) results. Calculations were performed with the aid of a simple model which expresses well the geometrical characteristic of plexiform bone. Estimated angular dependent Young's modulus in terms of the distribution of mineral orientation reproduced the experimental results. The suitable aspect ratio of bone mineral for the reproduction of the empirical data was a reasonable value compared with the morphological study of bone mineral. It is concluded that the angular dependence of mechanical properties of plexiform bone is explained by the distribution of bone mineral orientation and its morphology.     

Age-related changes of bone mineral density in human calcaneus, talus, and scaphoid bone

To examine whether the bone mineral density (BMD) decreases uniformly with aging in any spongy bones, the authors investigated age-related changes of BMD in the calcaneus, talus, and scaphoid bone. After the ordinary dissection by medical students was finished, calcanei, tali, and scaphoid bones were resected from the subjects, and BMDs were measured by dual-energy X-ray absorptiometry. Their BMDs seemed to decrease gradually with aging in the calcanei, tali, and scaphoid bones. It was found that there were statistically significant relationships between age and BMD in the men’s and women’s scaphoid bones, women’s tali, and women’s calcanei, but not in the men’s tali and calcanei. It should be noted that there were significant relationships between age and BMD in both men’s and women’s scaphoid bones. In regard to relationship in BMD between the bones of the upper and lower limbs in individuals, it was found that the relationship between the calcaneus and talus was higher than that between the calcaneus and scaphoid bone. This suggests that there is a higher relationship in BMD between the two tarsal bones compared with that between the tarsal and carpal bones.     

Height, bone mineral density and bone markers in congenital adrenal hyperplasia.

AIM: To evaluate height, bone growth, areal bone mineral density (aBMD), volumetric bone mineral density (vBMD) and markers of bone turnover in a group of patients affected by congenital adrenal hyperplasia (CAH). PATIENTS: There were 50 patients (23 males, 27 females), aged 1-28 years, affected by CAH due to 21-hydroxylase deficiency: 27 with the salt-wasting (SW); 14 with the simple virilizing (SV), and 9 with the nonclassical (NC) forms. METHODS: Bone morphometry was evaluated with the metacarpal index (MI) and lumbar aBMD and vBMD (L2-L4) by dual energy X-ray absorptiometry. Serum osteocalcin was used as a marker of bone formation, while urinary cross-linked N-telopeptides of type-I collagen and free deoxypyridinoline levels were evaluated as indexes of bone resorption. RESULTS: The height standard deviation score (SDS) was -0.41 +/- 1.4 in SW patients, -0.01 +/- 1.9 in SV patients, and -0.01 +/- 2.3 in NC patients. There was no significant difference among groups and against zero. The MI SDS was also not different between groups and against zero. aBMD was significantly lower in the pubertal patients compared with normal values, but only when patients with the SW and SV forms were considered together (p < 0.05). vBMD was significantly reduced in all patients with the classical form. Bone markers were not different in patients and controls. CONCLUSION: Our study shows that normal height can be attained in CAH patients; however, an impairment in bone growth and mineralization may be found in adolescents and young adults affected by the classical form.     

The dependence of the elastic properties of osteoporotic cancellous bone on volume fraction and fabric

Osteoporosis is a progressive systemic skeletal condition characterized by low bone mass and microarchitectural deterioration, with a consequent increase in susceptibility to fracture. Hence, osteoporosis would be best diagnosed by in vivo measurements of bone strength. As this is not clinically feasible, our goal is to estimate bone strength through the assessment of elastic properties, which are highly correlated to strength. Previously established relations between morphological parameters (volume fraction and fabric) and elastic constants could be applied to estimate cancellous bone stiffness in vivo. However, these relations were determined for normal cancellous bone. Cancellous bone from osteoporotic patients may require different relations. In this study we set out to answer two questions. First, can the elastic properties of osteoporotic cancellous bone be estimated from morphological parameters? Second, do the relations between morphological parameters and elastic constants, determined for normal bone, apply to osteoporotic bone as well? To answer these questions we used cancellous bone cubes from femoral heads of patients with (n=26) and without (n=32) hip fractures. The elastic properties of the cubes were determined using micro-finite element analysis, assuming equal tissue moduli for all specimens. The morphological parameters were determined using microcomputed tomography. Our results showed that, for equal tissue properties, the elastic properties of cancellous bone from fracture patients could indeed be estimated from morphological parameters. The morphology-based relations used to estimate the elastic properties of cancellous bone are not different for women with or without fractures.     

Microstructure,mineral and mechanical properties of teleost intermuscular bones

There is an increasing interest in understanding teleost bone biomechanics in several scientific communities, for instance as interesting biomaterials with specific structure-function relationships. Intermuscular bones of teleost fish have previously been described to play a role in the mechanical force transmission between muscle and bone, but their biomechanical properties are not yet fully described. Here, we have investigated intermuscular bones (IBs) of the North Atlantic Herring with regard to their structure and micro-architecture, mineral-related properties, and micro-mechanical tensile properties. A total of 115 IBs from 18 fish were investigated. One cohort of IBs, containing 20 bones from 2 smaller fish and 23 bones of 3 larger fish, was used for mechanical testing, wide-angle X-ray scattering, and scanning electron microscopy. Another cohort, containing 36 bones from 7 smaller fish and 36 bones from 6 larger fish, was used for microCT. Results show some astonishing properties of the IBs: (i) IBs present higher ductility, lower Young's modulus but similar strength and TMD (Tissue Mineral Density) compared to mammalian bone, and (ii) IBs from small fish were 49% higher in Young’s modulus than fish bones from larger fish while their TMD was not statistically different and crystal length was 8% higher in large fish bones. Our results revealed that teleost IB presents a hybrid nature of soft and hard tissue that differs from other bone types, which might be associated with their evolution from mineralized tendons. This study provides new data regarding teleost fish bone biomechanical and micro-structural properties.     

WNT16 influences bone mineral density, cortical bone thickness, bone strength, and osteoporotic fracture risk

We aimed to identify genetic variants associated with cortical bone thickness (CBT) and bone mineral density (BMD) by performing two separate genome-wide association study (GWAS) meta-analyses for CBT in 3 cohorts comprising 5,878 European subjects and for BMD in 5 cohorts comprising 5,672 individuals. We then assessed selected single-nucleotide polymorphisms (SNPs) for osteoporotic fracture in 2,023 cases and 3,740 controls. Association with CBT and forearm BMD was tested for ～2.5 million SNPs in each cohort separately, and results were meta-analyzed using fixed effect meta-analysis. We identified a missense SNP (Thr>Ile; rs2707466) located in the WNT16 gene (7q31), associated with CBT (effect size of -0.11 standard deviations [SD] per C allele, P = 6.2 × 10(-9)). This SNP, as well as another nonsynonymous SNP rs2908004 (Gly>Arg), also had genome-wide significant association with forearm BMD (-0.14 SD per C allele, P = 2.3 × 10(-12), and -0.16 SD per G allele, P = 1.2 × 10(-15), respectively). Four genome-wide significant SNPs arising from BMD meta-analysis were tested for association with forearm fracture. SNP rs7776725 in FAM3C, a gene adjacent to WNT16, was associated with a genome-wide significant increased risk of forearm fracture (OR = 1.33, P = 7.3 × 10(-9)), with genome-wide suggestive signals from the two missense variants in WNT16 (rs2908004: OR = 1.22, P = 4.9 × 10(-6) and rs2707466: OR = 1.22, P = 7.2 × 10(-6)). We next generated a homozygous mouse with targeted disruption of Wnt16. Female Wnt16(-/-) mice had 27% (P<0.001) thinner cortical bones at the femur midshaft, and bone strength measures were reduced between 43%-61% (6.5 × 10(-13)相似文献   

Bone mineral density and bone structure parameters as predictors of bone strength: an analysis using computerized microtomography and gastrectomy-induced osteopenia in the rat

In this study the relationships of bone mineral density (BMD) and bone structure parameters calculated from 2D microtomography images to bone strength were investigated. Femurs from 21 male Sprague Dawley rats were subjected to dual-energy X-ray absorptiometry, computerized microtomography (CmicroT) and either three-point cantilever bending (femoral shaft) or two-point bending compression (femoral neck). Gastrectomy was performed on 12 animals and 9 were sham operated. From the tomograms bone structure analysis was performed using a software routine based on grey level run-length method. Correlations of BMD and bone structure parameters to mechanical parameters were investigated as were differences between the gastrectomized and the control samples. The reductions of BMD between the groups were 21 and 27% in the femoral neck and shaft, respectively. For the shaft, the correlations of BMD to all mechanical parameters were significant and BMD was a consistent predictor of bone strength for cortical bone. However, in the femoral neck where cancellous bone predominates, BMD was weakly correlated only to deflection. A significant correlation between trabecular thickness and neck bone strength was found. Hence, compared to trabecular thickness, BMD was of limited value in predicting bone strength in the femoral neck.     

Genome screen for bone mineral density phenotypes in Fisher 344 and Lewis rat strains

In humans, peak bone mineral density (BMD) is the primary determinant of osteoporotic fracture risk among older individuals, with high peak BMD levels providing protection against osteoporosis in the almost certain event of bone loss later in life. A genome screen to identify quantitative trait loci (QTLs) contributing to areal BMD (aBMD) and volumetric BMD (vBMD) measurements at the lumbar spine and femoral neck was completed in 595 female F₂ rats produced from reciprocal crosses of inbred Fischer 344 and Lewis rats. Significant evidence of linkage was detected to rat Chromosomes 1, 2, 8, and 10, with LOD scores above 8.0. The region on rat Chromosome 8 is syntenic to human Chromosome 15, where linkage to spine and femur BMD has been previously reported and confirmed in a sample of premenopausal women.     

Effects of physical training on bone mineral density and bone metabolism

The purpose of this study was to examine the influences of long-term walking training and walking and jumping training on bone mineral density (BMD) and bone metabolism. Data from 28 healthy premenopausal women was assessed. The subjects were divided into the walking group (WG; 17 women mean+/-SE age 35+/-2 years), and the walking and jumping group (WJG; 11 women mean+/-SE age 39+/-1 years). BMD was measured in the lumbar spine and proximal femur using dual energy X-ray absorptiometry (DXA). As markers of bone metabolism, this study was to measure bone formation markers, bone-alkaline phosphatase (B-ALP: measured by enzyme immunoassay/EIA) and osteocalcin (BGP: by radioimmunoassay/RI) as well as bone resorption markers, parathyroid hormone (PTH: measured by/RI) and type I collagen cross-linked N-telopeptides (NTx: by EIA). Despite the significant decrease in body weight (p<0.05), no corresponding decrease in BMD was observed. Moreover, no significant difference in bone markers BGP, PTH, and NTx was observed. B-ALP was significantly increased (p<0.05) after one year, and the rate of this increase was greater in the WJG than in the WG. It is thus concluded that walking training for one year is beneficial for the promotion of bone formation, and that jumping stimulus maintain BMD effectively.     

Relation of bone mineral density and content to mineral content and density of the fat-free mass.

Differences in the mineral fraction of the fat-free mass (M(FFM)) and in the density of the FFM (D(FFM)) are often inferred from measures of bone mineral content (BMC) or bone mineral density (BMD). We studied the relation of BMC and BMD to the M(FFM) and D(FFM) in a heterogeneous sample of 216 young men (n = 115) and women (n = 101), which included whites (n = 155) and blacks (n = 61) and collegiate athletes ( n = 132) and nonathletes (n = 84). Whole body BMC and BMD were determined by dual-energy X-ray absorptiometry (DXA; Hologic QDR-1000W, enhanced whole body analysis software, version 5.71). FFM was estimated using a four-component model from measures of body density by hydrostatic weighing, body water by deuterium dilution, and bone mineral by DXA. There was no significant relation of BMD to M(FFM) (r = 0.01) or D(FFM) (r = -0.06) or of BMC to M(FFM) (r = -0.11) and a significant, weak negative relation of BMC to D(FFM) (r = -0.14, P = 0.04) in all subjects. Significant low to moderate relationships of BMD or BMC to M(FFM) or D(FFM) were found within some gender-race-athletic status subgroups or when the effects of gender, race, and athletic status were held constant using multiple regression, but BMD and BMC explained only 10-17% of the variance in M(FFM) and 0-2% of the variance in D(FFM) in addition to that explained by the demographic variables. We conclude that there is not a significant positive relation of BMD and BMC to M(FFM) or D(FFM) in young adults and that BMC and BMD should not be used to infer differences in M(FFM) or D(FFM).     

Orientation of bone mineral and its role in the anisotropic mechanical properties of bone--transverse anisotropy

An orientation of hydroxyapatite (HAP) crystals in bovine femur mineral was investigated by means of X-ray pole figure analysis (XPFA). It was found that the c-axis of HAP generally orients parallel to the longitudinal axis of bone (bone axis) and a significant amount of c-axis was oriented in other directions, in particular, perpendicular to the bone axis. Comparing these results with those of the small angle X-ray scattering (SAXS) investigation by Matsushima et al. (Jap. J. appl. Phys. 21, 186-189, 1982) at least two types of morphology of bone mineral were found; rod like bone mineral having the c-axis of HAP crystal parallel to the longitudinal axis of the rod and that having the c-axis not parallel, in a particular case, perpendicular to its longitudinal axis. Transverse anisotropy in mechanical properties of bone was reproduced by the estimation of Young's moduli by using the structural results mainly from XPFA. It is concluded that the anisotropy in mechanical properties of bone is well explained by taking account of the non-longitudinal (off-bone) axial distribution of orientation of bone mineral.     

Dietary calcium,sex hormones,and bone mineral density in men.

OBJECTIVE--To evaluate the factors that determine bone mineral density at axial and appendicular sites in normal men. DESIGN--Measurement of bone mineral density of the radius by single photon absorptiometry and of the lumbar spine and hip by dual photon absorptiometry to assess their relation with various determinants of bone mineral density. Dietary calcium was assessed from a questionnaire validated against a four day dietary record. SETTING--Local community, Sydney, Australia. PATIENTS--48 Men (aged 21-79, median 44) recruited from the local community including 35 male cotwins of twin pairs of differing sex recruited from the Australian National Health and Medical Research Council twin registry for epidemiological studies on determinants of bone mineral density. MAIN OUTCOME MEASURES--Bone mineral density of the axial and appendicular skeleton and its relation to age, anthropometric features, dietary calcium intake, and serum sex hormone concentrations. RESULTS--Dietary calcium intake (g/day) was a significant predictor of bone mineral density of axial bones, explaining 24% and 42% of the variance at the lumbar spine and femoral neck respectively. This effect was independent of weight. In contrast with the axial skeleton, bone mineral density at each forearm site was predicted by weight and an index of free testosterone but not by dietary calcium intake. CONCLUSIONS--Dietary calcium intake has a role in the determination or maintenance, or both, of the axial but not the appendicular skeleton in adult men.     

Compressive and tensile mechanical properties of the porcine nasal septum

The expanding nasal septal cartilage is believed to create a force that powers midfacial growth. In addition, the nasal septum is postulated to act as a mechanical strut that prevents the structural collapse of the face under masticatory loads. Both roles imply that the septum is subject to complex biomechanical loads during growth and mastication. The purpose of this study was to measure the mechanical properties of the nasal septum to determine (1) whether the cartilage is mechanically capable of playing an active role in midfacial growth and in maintaining facial structural integrity and (2) if regional variation in mechanical properties is present that could support any of the postulated loading regimens. Porcine septal samples were loaded along the horizontal or vertical axes in compression and tension, using different loading rates that approximate the in vivo situation. Samples were loaded in random order to predefined strain points (2–10%) and strain was held for 30 or 120 seconds while relaxation stress was measured. Subsequently, samples were loaded until failure. Stiffness, relaxation stress and ultimate stress and strain were recorded. Results showed that the septum was stiffer, stronger and displayed a greater drop in relaxation stress in compression compared to tension. Under compression, the septum displayed non-linear behavior with greater stiffness and stress relaxation under faster loading rates and higher strain levels. Under tension, stiffness was not affected by strain level. Although regional variation was present, it did not strongly support any of the suggested loading patterns. Overall, results suggest that the septum might be mechanically capable of playing an active role in midfacial growth as evidenced by increased compressive residual stress with decreased loading rates. However, the low stiffness of the septum compared to surrounding bone does not support a strut role. The relatively low stiffness combined with high stress relaxation under fast loading rates suggests that the nasal septum is a stress dampener, helping to absorb and dissipate loads generated during mastication.