Type IV pilus genes pilA and pilC of Pseudomonas stutzeri are required for natural genetic transformation, and pilA can be replaced by corresponding genes from nontransformable species

Pseudomonas stutzeri lives in terrestrial and aquatic habitats and is capable of natural genetic transformation. After transposon mutagenesis, transformation-deficient mutants were isolated from a P. stutzeri JM300 strain. In one of them a gene which coded for a protein with 75% amino acid sequence identity to PilC of Pseudomonas aeruginosa, an accessory protein for type IV pilus biogenesis, was inactivated. The presence of type IV pili was demonstrated by susceptibility to the type IV pilus-dependent phage PO4, by occurrence of twitching motility, and by electron microscopy. The pilC mutant had no pili and was defective in twitching motility. Further sequencing revealed that pilC is clustered in an operon with genes homologous to pilB and pilD of P. aeruginosa, which are also involved in pilus formation. Next to these genes but transcribed in the opposite orientation a pilA gene encoding a protein with high amino acid sequence identity to pilin, the structural component of type IV pili, was identified. Insertional inactivation of pilA abolished pilus formation, PO4 plating, twitching motility, and natural transformation. The amounts of (3)H-labeled P. stutzeri DNA that were bound to competent parental cells and taken up were strongly reduced in the pilC and pilA mutants. Remarkably, the cloned pilA genes from nontransformable organisms like Dichelobacter nodosus and the PAK and PAO strains of P. aeruginosa fully restored pilus formation and transformability of the P. stutzeri pilA mutant (along with PO4 plating and twitching motility). It is concluded that the type IV pili of the soil bacterium P. stutzeri function in DNA uptake for transformation and that their role in this process is not confined to the species-specific pilin.     

Differentiation of arcA, arcB, and cpxA mutant phenotypes of Escherichia coli by sex pilus formation and enzyme regulation.

In Escherichia coli, mutations in arcA (dye) or arcB anaerobically derepress the synthesis of a multitude of enzymes of aerobic function, and mutations in arcA or cpxA impair F-pilus formation. It is thought that arcA encodes a promoter-recognizing protein, whereas arcB and cpxA encode sensor proteins which interact with the arcA product. In this study we found that anaerobic growth of a wild-type F' strain decreased the synthesis of both the enzymes and the pilus. Although the two arcA mutants examined were both anaerobically derepressed in the enzymes and impaired in aerobic pilus formation as expected, one mutant hyperproduced the pilus anaerobically. The two arcB mutants examined showed normal pilus formation when grown aerobically. When grown anaerobically they developed more pili than the wild-type strain did when grown aerobically. When a cpxA mutant was examined for synthesis of two aerobic enzymes, normal regulation was found. The available data suggest the following. The arcA product anaerobically represses certain genes of aerobic function and activates certain genes related to F function. It appears that the arcB product senses the redox or energy state; absence of the gene function shifts the arcA product to the nonrepressive form for enzyme synthesis for aerobic pathways. The cpxA product, on the other hand, senses the sexual state; absence of the gene function shifts the arcA product to the inactive form for F-pilus synthesis.     

The plasmid R64 thin pilus identified as a type IV pilus.

The entire nucleotide sequence of the pil region of the IncI1 plasmid R64 was determined. Analysis of the sequence indicated that 14 genes, designated pilI through pilV, are involved in the formation of the R64 thin pilus. Protein products of eight pil genes were identified by the maxicell procedure. The pilN product was shown to be a lipoprotein by an experiment using globomycin. A computer search revealed that several R64 pil genes have amino acid sequence homology with proteins involved in type IV pilus biogenesis, protein secretion, and transformation competence. The pilS and pilV products were suggested to be prepilins for the R64 thin pilus, and the pilU product appears to be a prepilin peptidase. These results suggest that the R64 thin pilus belongs to the type IV family, specifically group IVB, of pili. The requirement of the pilR and pilU genes for R64 liquid mating was demonstrated by constructing their frameshift mutations. Comparison of three type IVB pilus biogenesis systems, the pil system of R64, the toxin-coregulated pilus (tcp) system of Vibrio cholerae, and the bundle-forming pilus (bfp) system of enteropathogenic Escherichia coli, suggests that they have evolved from a common ancestral gene system.     

Identification of two minor subunits in the pilus of Haemophilus influenzae.

Haemophilus influenzae type b (Hib) organisms produce pili, which mediate attachment to human cells and are multimeric structures composed of a 24-kDa subunit called pilin or HifA. Although pili from other organisms contain additional proteins accessory to pilin, no structural components other than pilin have been identified in Hib pili. Previous analysis of a Hib pilus gene cluster, however, suggested that two genes, hifD and hifE, may encode additional pilus subunits. To determine if hifD and hifE encode pilus components, the genes were overexpressed in Escherichia coli and the resulting proteins were purified and used to raise polyclonal antisera. Antisera raised against C-terminal HifD and HifE fragments reacted with H. influenzae HifD and HifE proteins, respectively, on Western immunoblots. Western immunoblot analysis of immunoprecipitated Hib pili demonstrated that HifD and HifE copurified with pili. In enzyme-linked immunosorbent assays, antisera raised against a recombinant HifE protein that contained most of the mature protein reacted more to piliated Hib than to nonpiliated Hib or to a mutant containing a hifE gene insertion. Immunoelectron microscopy confirmed that the HifE antiserum bound to pili and demonstrated that the antiserum bound predominantly to the pilus tips. These data indicate that HifD and HifE are pilus subunits. Adherence inhibition studies demonstrated that the HifE antiserum completely blocked pilus-mediated hemagglutination, suggesting that HifE mediates pilus adherence.     

Genetic characterization of Escherichia coli type 1 pilus adhesin mutants and identification of a novel binding phenotype

Five Escherichia coli type 1 pilus mutants that had point mutations in fimH, the gene encoding the type 1 pilus adhesin FimH, were characterized. FimH is a minor component of type 1 pili that is required for the pili to bind and agglutinate guinea pig erythrocytes in a mannose-inhibitable manner. Point mutations were located by DNA sequencing and deletion mapping. All mutations mapped within the signal sequence or in the first 28% of the predicted mature protein. All mutations were missense mutations except for one, a frameshift lesion that was predicted to cause the loss of approximately 60% of the mature FimH protein. Bacterial agglutination tests with polyclonal antiserum raised to a LacZ-FimH fusion protein failed to confirm that parental amounts of FimH cross-reacting material were expressed in four of the five mutants. The remaining mutant, a temperature-sensitive (ts) fimH mutant that agglutinated guinea pig erythrocytes after growth at 31 degrees C but not at 42 degrees C, reacted with antiserum at both temperatures in a manner similar to the parent. Consequently, this mutant was chosen for further study. Temperature shift experiments revealed that new FimH biosynthesis was required for the phenotypic change. Guinea pig erythrocyte and mouse macrophage binding experiments using the ts mutant grown at the restrictive and permissive temperatures revealed that whereas erythrocyte binding was reduced to a level comparable to that of a fimH insertion mutant at the restrictive temperature, mouse peritoneal macrophages were bound with parental efficiency at both the permissive and restrictive temperatures. Also, macrophage binding by the ts mutant was insensitive to mannose inhibition after growth at 42 degrees C but sensitive after growth at 31 degrees C. The ts mutant thus binds macrophages with one receptor specificity at 31 degrees C and another at 42 degrees C.     

pilQ Missense mutations have diverse effects on PilQ multimer formation, piliation, and pilus function in Neisseria gonorrhoeae

Type IV pili are required for virulence in Neisseria gonorrhoeae, as they are involved in adherence to host epithelium, twitching motility, and DNA transformation. The outer membrane secretin PilQ forms a homododecameric ring through which the pilus is proposed to be secreted. pilQ null mutants are nonpiliated, and thus, all pilus-dependent functions are eliminated. Mutagenesis was performed on the middle one-third of pilQ, and mutants with colony morphologies consistent with the colony morphology of nonpiliated or underpiliated bacteria were selected. Nineteen mutants, each with a single amino acid substitution, were isolated and displayed diverse phenotypes in terms of PilQ multimer stability, pilus expression, transformation efficiency, and host cell adherence. The 19 mutants were grouped into five phenotypic classes based on functionality. Four of the five mutant classes fit the current model of pilus functionality, which proposes that a functional pilus assembly apparatus, not necessarily full-length pili, is required for transformation, while high levels of displayed pili are required for adherence. One class, despite having an underpiliated colony morphology, expressed high levels of pili yet adhered poorly, demonstrating that pilus expression is necessary but not sufficient for adherence and indicating that PilQ may be directly involved in host cell adherence. The collection of phenotypes expressed by these mutants suggests that PilQ has an active role in pilus expression and function.     

Atpase activity and multimer formation of Pilq protein are required for thin pilus biogenesis in plasmid R64

Plasmid R64 pilQ gene is essential for the formation of thin pilus, a type IV pilus. The pilQ product contains NTP binding motifs and belongs to the PulE-VirB11 family of NTPases. The pilQ gene was overexpressed with an N-terminal His tag, and PilQ protein was purified. Purified His tag PilQ protein displayed ATPase activity with a V(max) of 0.71 nmol/min/mg of protein and a K(m) of 0.26 mm at pH 6.5. By gel filtration chromatography, PilQ protein was eluted at the position corresponding to 460 kDa, suggesting that PilQ protein forms a homooctamer. To analyze the relationship between structure and function of PilQ protein, amino acid substitutions were introduced within several conserved motifs. Among 11 missense mutants, 7 mutants exhibited various levels of reduced DNA transfer frequencies in liquid matings. Four mutant genes (T234I, K238Q, D263N, and H328A) were overexpressed with a His tag. The purified mutant PilQ proteins contained various levels of reduced ATPase activity. Three mutant PilQ proteins formed stable multimers similar to wild-type PilQ, whereas the PilQ D263N multimer was unstable. PilQ D263N monomer exhibited low ATPase activity, while PilQ D263N multimer did not. These results indicate that ATPase activity of the PilQ multimer is essential for R64 thin pilus biogenesis.     

Characterization of genes required for pilus expression in Pseudomonas syringae pathovar phaseolicola.

Nonpiliated, phage phi 6-resistant mutants of Pseudomonas syringae pv. phaseolicola were generated by Tn5 transposon mutagenesis. A P. syringae pv. phaseolicola LR700 cosmid library was screened with Tn5-containing EcoRI fragments cloned from nonpiliated mutants. The cosmid clone pVK253 complemented the nonpiliated mutant strain HB2.5. A 3.8-kb sequenced region spanning the Tn5 insertion site contained four open reading frames. The transposon-inactivated gene, designated pilP, is 525 bp long, potentially encoding a 19.1-kDa protein precursor that contains a typical membrane lipoprotein leader sequence. Generation of single mutations in each of the three remaining complete open reading frames by marker exchange also resulted in a nonpiliated phenotype. Expression of this gene region by the T7 expression system in Escherichia coli resulted in four polypeptides of approximately 39, 26, 23, and 18 kDa, in agreement with the sizes of the open reading frames. The three genes upstream of pilP were designated pilM (39 kDa), pilN (23 kDa), and pilO (26 kDa). The processing of the PilP precursor into its mature form was shown to be inhibited by globomycin, a specific inhibitor of signal peptidase II. The gene region identified shows a high degree of homology to a gene region reported to be required for Pseudomonas aeruginosa type IV pilus production.     

Novel proteins that modulate type IV pilus retraction dynamics in Pseudomonas aeruginosa

Pseudomonas aeruginosa uses type IV pili to colonize various materials and for surface-associated twitching motility. We previously identified five phylogenetically distinct alleles of pilA in P. aeruginosa, four of which occur in genetic cassettes with specific accessory genes (J. V. Kus, E. Tullis, D. G. Cvitkovitch, and L. L. Burrows, Microbiology 150:1315-1326, 2004). Each of the five pilin alleles, with and without its associated pilin accessory gene, was used to complement a group II PAO1 pilA mutant. Expression of group I or IV pilA genes restored twitching motility to the same extent as the PAO1 group II pilin. In contrast, poor twitching resulted from complementation with group III or group V pilA genes but increased significantly when the cognate tfpY or tfpZ accessory genes were cointroduced. The enhanced motility was linked to an increase in recoverable surface pili and not to alterations in total pilin pools. Expression of the group III or V pilins in a PAO1 pilA-pilT double mutant yielded large amounts of surface pili, regardless of the presence of the accessory genes. Therefore, poor piliation in the absence of the TfpY and TfpZ accessory proteins results from a net increase in PilT-mediated retraction. Similar phenotypes were observed for tfpY single and tfpY-pilT double knockout mutants of group III strain PA14. A PilA_V-TfpY chimera produced few surface pili, showing that the accessory proteins are specific for their cognate pilin. The genetic linkage between specific pilin and accessory genes may be evolutionarily conserved because the accessory proteins increase pilus expression on the cell surface, thereby enhancing function.     

Genetic complementation analysis of Escherichia coli type 1 somatic pilus mutants.

A genetic complementation analysis of 75 stable nonpiliated mutants of a type 1 piliated strain of Escherichia coli K-12, AW405, was performed. Strains containing pairs of pil mutations were constructed by the infectious transfer of an F101 plasmid containing one pil mutation into E. coli K-12 AW 405 containing another pil mutation. The presence or absence of type 1 pili on the merodiploid strains was determined by agglutination with type 1 pilus antiserum. All 75 mutants fell into one of four complementation groups. The pattern of complementation defined three cistrons involved in pilus formation, pilA, pilB, and pilC. The fourth complementation group was composed of a large number of mutants defective in both pilA and pilB functions.     

Identification and characterization of the chaperone-subunit complex-binding domain from the type 1 pilus assembly platform FimD

The outer membrane protein FimD represents the assembly platform of adhesive type 1 pili from Escherichia coli. FimD forms ring-shaped oligomers of 91.4 kDa subunits that recognize complexes between the pilus chaperone FimC and individual pilus subunits in the periplasm and mediate subunit translocation through the outer membrane. Here, we have identified a periplasmic domain of FimD (FimD(N)) comprising the N-terminal 139 residues of FimD. Purified FimD(N) is a monomeric, soluble protein that specifically recognizes complexes between FimC and individual type 1 pilus subunits, but does not bind the isolated chaperone, or isolated subunits. In addition, FimD(N) retains the ability of FimD to recognize different chaperone-subunit complexes with different affinities, and has the highest affinity towards the FimC-FimH complex. Overexpression of FimD(N) in the periplasm of wild-type E.coli cells diminished incorporation of FimH at the tip of type 1 pili, while pilus assembly itself was not affected. The identification of FimD(N) and its ternary complexes with FimC and individual pilus subunits opens the avenue to structural characterization of critical type 1 pilus assembly intermediates.     

Role of type IV pili in virulence of Pseudomonas syringae pv. tabaci 6605: correlation of motility, multidrug resistance, and HR-inducing activity on a nonhost plant

To investigate the role of type IV pili in the virulence of phytopathogenic bacteria, four mutant strains for pilus biogenesis-related genes were generated in Pseudomonas syringae pv. tabaci 6605. PilA encodes the pilin protein as a major subunit of type IV pili, and the pilO product is reported to be required for pilus assembly. The fimU and fimT genes are predicted to produce minor pilins. Western blot analysis revealed that pilA, pilO, and fimU mutants but not the fimT mutant failed to construct type IV pili. Although the swimming motility of all mutant strains was not impaired in liquid medium, they showed remarkably reduced motilities on semisolid agar medium, suggesting that type IV pili are required for surface motilities. Virulence toward host tobacco plants and hypersensitive response-inducing ability in nonhost Arabidopsis leaves of pilA, pilO, and fimU mutant strains were reduced. These results might be a consequence of reduced expression of type III secretion system-related genes in the mutant strains. Further, all mutant strains showed enhanced expression of resistance-nodulation-division family members mexA, mexB, and oprM, and higher tolerance to antimicrobial compounds. These results indicate that type IV pili are an important virulence factor of this pathogen.     

Bacterial outer membrane ushers contain distinct targeting and assembly domains for pilus biogenesis

Biogenesis of a superfamily of surface structures by gram-negative bacteria requires the chaperone/usher pathway, a terminal branch of the general secretory pathway. In this pathway a periplasmic chaperone works together with an outer membrane usher to direct substrate folding, assembly, and secretion to the cell surface. We analyzed the structure and function of the PapC usher required for P pilus biogenesis by uropathogenic Escherichia coli. Structural analysis indicated PapC folds as a beta-barrel with short extracellular loops and extensive periplasmic domains. Several periplasmic regions were localized, including two domains containing conserved cysteine pairs. Functional analysis of deletion mutants revealed that the PapC C terminus was not required for insertion of the usher into the outer membrane or for proper folding. The usher C terminus was not necessary for interaction with chaperone-subunit complexes in vitro but was required for pilus biogenesis in vivo. Interestingly, coexpression of PapC C-terminal truncation mutants with the chromosomal fim gene cluster coding for type 1 pili allowed P pilus biogenesis in vivo. These studies suggest that chaperone-subunit complexes target an N-terminal domain of the usher and that subunit assembly into pili depends on a subsequent function provided by the usher C terminus.     

New tools in an old trade: CS1 pilus morphogenesis

CS1 pili serve as the prototype for a large class of serologically distinct pili associated with enterotoxigenic Escherichia coli that cause diarrhoea in humans. The four genes essential for CS1 pilus morphogenesis, cooB, A, C and D, are arranged in an operon and encode structural and assembly proteins unlike those of other pilus systems commonly associated with Gram-negative bacteria. CS1 pili are composed primarily of the major pilin subunit, CooA, which determines the serological type of the pilus. The major pilin subunit is assembled into pili by the proteins CooB, CooC and CooD. CooD is both a minor component found at the pilus tip and an essential assembly protein, whereas CooC is an outer membrane protein thought to be involved in pilin transport. CooB is a novel periplasmic chaperone-like protein that forms intermolecular complexes with and stabilizes the major and minor pilins. Unlike other pilin chaperones, CooB also stabilizes the outer membrane component of the assembly system, CooC. The proteins of CS1 pili have no significant homology to those of the well-characterized Pap (pyelonephritis-associated) pili and related systems, although most of the features of pilus morphogenesis are similar. Therefore, these appear to be among the rare cases of convergent evolution. Thus, for CS1 pili, enterotoxigenic E. coli use new protein 'tools' in the old 'trade' of forming functional pili.     

Pilus biogenesis and epithelial cell adherence of Neisseria gonorrhoeae pilC double knock-out mutants

The phase-variable PilC proteins of pathogenic Neisseria species have recently been implicated in both assembly and cellular adherence functions of the type 4 pili of these pathogens. We describe here the cloning of full-length pilC1 and pilC2 genes and the complete sequencing of the pilC2 gene of Neisseria gonorrhoeae MS11. Sequential inactivation of both genes by gene replacement in piliated (P⁺) variants of N. gonorrhoeae MS11 led initially to a non-piliated (P⁻) phenotype; however, spontaneous P⁺ variants could be derived from some pilC1,2 double mutants which produced morphologically intact pili. Purified pili from pilC1,2 mutants revealed no detectable PilC protein. Instead, a novel protein about 70 kDa in size appeared in the pili preparations of P⁺ mutants; this protein exhibited no immunological cross-reactivity with PilC1 or PilC2. We propose that this novel factor replaces the function of PilC in pilus biogenesis. Using isogenic N. gonorrhoeae strains which produce identical PilE (pilin) proteins we demonstrate that pili associated with the 70 kDa protein do not confer gonococcal adherence to human epithelial cells, in contrast to pili assembled in the presence of PilC1 or PilC2.     

Genes of pyelonephritogenic E. coli required for digalactoside-specific agglutination of human cells.

Most pyelonephritic Escherichia coli strains bind to digalactoside-containing glycolipids on uroepithelial cells. Purified Pap pili (pili associated with pyelonephritis) show the same binding specificity. A non-polar mutation early in the papA pilin gene abolishes formation of Pap pili but does not affect the degree of digalactoside-specific hemagglutination. Three novel pap genes, papE , papF and papG are defined in this report. The papF and papG gene products are both required for digalactoside-specific agglutination by whole bacteria cells as well as for agglutination by pilus preparations. Pili prepared from a papE mutant have lost their binding ability although whole cells from this mutant retain it, implying an adhesin anchoring role for the papE gene product. A mutant with lesions both in the papA and the papE genes does not mediate digalactoside-specific agglutination. The implications of this finding for pilus biogenesis are discussed.     

Isopeptide bonds of the major pilin protein BcpA influence pilus structure and bundle formation on the surface of Bacillus cereus

Bacillus cereus strains elaborate pili on their surface using a mechanism of sortase-mediated cross-linking of major and minor pilus components. Here we used a combination of electron microscopy and atomic force microscopy to visualize these structures. Pili occur as single, double or higher order assemblies of filaments formed from monomers of the major pilin, BcpA, capped by the minor pilin, BcpB. Previous studies demonstrated that within assembled pili, four domains of BcpA - CNA(1), CNA(2), XNA and CNA(3) - each acquire intramolecular lysine-asparagine isopeptide bonds formed via catalytic glutamic acid or aspartic acid residues. Here we showed that mutants unable to form the intramolecular isopeptide bonds in the CNA(2) or CNA(3) domains retain the ability to form pilus bundles. A mutant lacking the CNA(1) isopeptide bond assembled deformed pilin subunits that failed to associate as bundles. X-ray crystallography revealed that the BcpA variant Asp(312) Ala, lacking an aspartyl catalyst, did not generate the isopeptide bond within the jelly-roll structure of XNA. The Asp(312) Ala mutant was also unable to form bundles and promoted the assembly of deformed pili. Thus, structural integrity of the CNA(1) and XNA domains are determinants for the association of pili into higher order bundle structures and determine native pilus structure.     

Pilin expression and processing in pilus mutants of Neisseria gonorrhoeae: critical role of Gly-1 in assembly

Spontaneous mutants of Neisseria gonorrheae failing to express pili or having diminished levels of piliation were studied with regard to pilin expression. All mutants displayed altered pilin processing detectable as the release of soluble, truncated pilin molecules (S-pilin). Of particular interest was the finding, in one mutant, that substitution of serine for glycine at position -1 of propilin, a highly conserved residue among N-metPhe and related pilins, abolished pilus expression but not S-pilin release. The degree of S-pilin processing and the levels of membrane-associated pilin varied among the different classes of mutants, suggesting that each was blocked at a distinct step of pilus biogenesis. The data support a model in which increased S-pilin processing is a result of a decreased rate of pilus polymerization.