"Molded" rods of macroporous polymer for preparative separations of biological products

A continuous rod of porous poly(glycidy1 methacrylate-co-ethylene dimethacrylate) has been prepared by a free radical polymerization within the confines of a 16-mm-i.d. glass column. The epoxide groups of the rod have been modified in situ by their reaction with diethylamine to afford the ionizable weak base 1-N,N-diethylamino-2-hydroxypropyl functionalities that are required for the ion-exchange chromatographic mode. The bimodal pore size distribution curve typical for other molded separation media also prevail for the preparative-size rod. The column has been used successfully for the chromatographic separation of a mixture of standard proteins and yeast enzymes. The column exhibits a dynamic capacity that exceeds 420 mg of bovine serum albumin at a flow velocity of 60 cm/h. (c) 1995 John Wiley & Sons, Inc.     

Modeling and prediction of the mixed-mode retention mechanisms for puerarin and its analogues on n-octylamine modified poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) monoliths

n-Octylamine modified poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) (poly(GMA-co-EGDMA)) monoliths were prepared for the rapid screening and determination of puerarin content of a crude extract Radix puerariae. The mixed-mode retention mechanisms for puerarin and its analogues on n-octylamine modified monoliths were investigated using a variety of solvent systems, chromatographic evaluation and molecular dynamics (MDs) modeling. The equilibrated conformations between cross-linked polymers and target molecules were obtained from MD modeling. Both the polymer skeleton and functional groups played important roles in the recognition process. The cross-linker formed a structural network skeleton, in which recognition cavities were formed surrounded by functional groups. The polymer network structures provided good interaction access for isoflavones. The active groups recognized isoflavones by both intermolecular hydrogen bonding and hydrophobic interaction. The interaction energies and retention factors between polymers and target molecules were also evaluated and compared. A higher value of interaction energy corresponded to a higher value of retention factor. The potential of using modeling technology for predicting the chromatographic performances of target molecules was explored.     

High-performance affinity chromatography for characterization of human immunoglobulin G digestion with papain

Reactive continuous rods of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) were prepared within the confines of a stainless steel column. Then papain was immobilized on these monoliths either directly or linked by a spacer arm. In a further step, a protein A affinity column was used for the characterization of the digestion products of human immunoglobulin G (IgG) by papain. The results showed that papain immobilized on the monolithic rod through a spacer arm exhibits higher activity for the digestion of human IgG than that without a spacer arm. The apparent Michaelis-Menten kinetic constants of free and immobilized papain, K(m) and V(max), were determined. The digestion conditions of human IgG with free and immobilized papain were optimized. Comparison of the thermal stability of free and immobilized papain showed that the immobilized papain exhibited higher thermal stability than the free enzyme. The half-time of immobilized papain reaches about a week under optimum pH and temperature conditions.     

One-step rapid determination and purification of puerarin from Radix puerariae by n-octylamine-modified poly(methacrylate-co-ethylene dimethacrylate) monolith

n-Octylamine-modified poly(methacrylate-co-ethylene dimethacrylate) monoliths were prepared for rapid screening, determination and one-step purification of puerarin from Radix puerariae (a crude extract of the root of Pueraria lobata). The modified monolith showed a specific surface area of 17.8 m(2) g(-1), an average pore size of 0.76 microm and a total porosity of 60.8%. Fast separation of R. puerariae crude extract was achieved within 5 min at a flow velocity of 722 cm h(-1) resulting in a puerarin purity of 97%, with a recovery of 85%. This demonstrates the potential of n-octylamine-modified poly(methacrylate-co-ethylene dimethacrylate) monolith for the rapid analysis and separation of isoflavonoids. Preparative scale sample loading (12 mg in 2 mL) resulted in a purity of 95%, and a recovery of about 69%. HPLC, FTIR, MS and (1)H NMR spectroscopy were used for the characterization and quantification of puerarin in isolated fraction.     

Preparation of novel β-cyclodextrin functionalized monolith and its application in chiral separation

A novel β-cyclodextrin (β-CD) functionalized organic polymer monolith was prepared by covalently bonding ethylenediamine-β-CD (EDA-β-CD) to poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) (poly(GMA-co-EGDMA)) monolith via ring opening reaction of epoxy groups. SEM characterization was performed to confirm the homogeneity of the monolithic polymer. The resulting monolith was then characterized by DSC and XPS elemental analysis to study the thermal stability of the monolith, and to prove the successful immobilization of β-CD on the polymer substrate. The β-CD ligand density of 0.68 mmol g^?1 was obtained for the modified monolith, indicating the high reactivity and efficiency of the EDA-β-CD modifier. The ethylenediamine-β-CD functionalized monoliths were used for the chiral separation of ibuprofen racemic mixture and showed promising results.     

High-performance affinity chromatography with immobilization of protein A and L-histidine on molded monolith

Reactive monoliths of macroporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) have been prepared by "in-situ" copolymerization of the monomers in the presence of porogenic diluents. Protein A and L-histidine were immobilized on the monoliths directly or through a spacer arm, respectively. The properties of these two kinds of affinity columns were characterized, and the results showed that the columns with coupling of ligands by a spacer arm have some extent of non-specific adsorption for bovine serum albumin. The affinity column based on the monolithic polymer support provided us with good hydrodynamic characteristic, low flow resistance, and easy preparation. These two affinity columns were used for the purification of immunoglobulin G from human serum. The purity of the purified IgG was detected by matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF-MS). The stability of the protein A affinity column was investigated, and its performance remained invariable after half a year. The effects of the nature and the pH of the buffer system on the adsorption capacity of human IgG on histidyl affinity column were also investigated. The protein A affinity column is favorable for rapid analysis of human IgG samples. In contrast, the advantages of mild elution conditions, high stability, as well as low cost provide the histidyl column further potential possibility for fast removal of IgG from human plasma in clinical applications.     

Immobilized zirconium ion affinity chromatography for specific enrichment of phosphopeptides in phosphoproteome analysis

Large scale characterization of phosphoproteins requires highly specific methods for purification of phosphopeptides because of the low abundance of phosphoproteins and substoichiometry of phosphorylation. Enrichment of phosphopeptides from complex peptide mixtures by IMAC is a popular way to perform phosphoproteome analysis. However, conventional IMAC adsorbents with iminodiacetic acid as the chelating group to immobilize Fe(3+) lack enough specificity for efficient phosphoproteome analysis. Here we report a novel IMAC adsorbent through Zr(4+) chelation to the phosphonate-modified poly(glycidyl methacrylate-co-ethylene dimethacrylate) polymer beads. The high specificity of Zr(4+)-IMAC adsorbent was demonstrated by effectively enriching phosphopeptides from the digest mixture of phosphoprotein (alpha- or beta-casein) and bovine serum albumin with molar ratio at 1:100. Zr(4+)-IMAC adsorbent was also successfully applied for the analysis of mouse liver phosphoproteome, resulting in the identification of 153 phosphopeptides (163 phosphorylation sites) from 133 proteins in mouse liver lysate. Significantly more phosphopeptides were identified than by the conventional Fe(3+)-IMAC approach, indicating the excellent performance of the Zr(4+)-IMAC approach. The high specificity of Zr(4+)-IMAC adsorbent was found to mainly result from the strong interaction between chelating Zr(4+) and phosphate group on phosphopeptides. Enrichment of phosphopeptides by Zr(4+)-IMAC provides a powerful approach for large scale phosphoproteome analysis.     

Polymer-immobilized fluorinase: Recyclable catalyst for fluorination reactions

Polymer-immobilized fluorinase for the synthesis of 5′-fluoro-5′-deoxyadenosine (FDA) from S-adenosyl-l-methionine (SAM) and fluoride ion in aqueous media is described. The optimal composition of the poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) and the heterogeneous catalytic reaction conditions were developed to yield FDA in 49% within 150 min. In PET radiochemistry, using [¹⁸F]fluoride ion in [¹⁸O]H₂O obtained from the cyclotron, [¹⁸F]FDA was synthesized with 68% fluorination efficiency. The immobilized fluorinase was recycled for up to four runs with 80% of catalytic activity in the final cycle.     

Development of rigid bidisperse porous microspheres for high-speed protein chromatography

Development of a high-performance stationary phase is an essential demand for high-speed separation of proteins by liquid chromatography. Based on a novel porogenic mode, that is, using superfine granules of calcium carbonate as solid porogen and a mixture of cyclohexanol and dodecanol as liquid porogen, a rigid spherical biporous poly(glycidyl methacrylate-co-ethylene dimethacrylate) matrix has been prepared by radical suspension-polymerization. The epoxide groups of the matrix were modified with diethylamine to afford the ionizable weak base 1-N,N-diethylamino-2-hydeoxypropy functionalities that are required for ion exchange chromatography. Results from scanning electron microscopy and mercury intrusion porosimetry measurements revealed that the matrix contained two families of pores, that is, micropores (10-90 nm) and macropores (180-4000 nm). Furthermore, the biporous medium possesses specific surface area as high as 91.3 m(2)/g. Because of the presence of the macropores that provided convective flow channels for the mobile phase, the dynamic adsorption capacity was found to be as high as 54.6 mg/g wet bead at 300 cm/h, approximately 63.2% of its static capacity. In addition, the column efficiency and dynamic binding capacity decreased only slightly with mobile-phase flow rate in the range of 300-3000 cm/h. These properties made the packed bed with the bidisperse porous matrix suitable for high-speed protein chromatography.     

High performance flow injection analysis of recombinant protein G

Chromatographic discs were investigated for their potential to substitute for the hitherto used cartridges in heterogeneous flow injection analysis. Originally designed for fast high performance liquid chromatography (HPLC) of biopolymers, the discs combine reliability with speed and resolution. This together with their price and their long-standing time made them attractive for use in flow injection analysis. The base material of the discs is a glycidyl methacrylate-co-ethylene dimethacrylate (GMA-EDMA) co-polymer. The epoxy groups inherent to this base structure can be used for immobilization purposes. In this first demonstration, antibodies were immobilized and the resulting affinity discs used for the fast analysis (< 5 min) of protein G from cell lysate of recombinant Escherichia coli. A linear calibration curve over several orders of magnitude as well as excellent reproducibility and correlation with data produced by conventional protein assay were obtained.     

P(HPMA/EGDMA) beads grafted with fibrous chains by SI-ATRP method: agmatine functionalized affinity beads for selective separation of serum albumin

In this paper, novel core–shell polymeric affinity beads based on fibrous grafting and functionalization with a salt resistance affinity ligand were developed to separate and deplete serum albumin (SA) from human serum. Poly(hydroxypropyl methacrylate/ethyleneglycole dimethacrylate), p(HPMA/EGDMA), beads were prepared via suspension polymerization, and were grafted with poly(glycidyl methacrylate) (p(GMA)) via surface-initiated atom transfer radical polymerization (SI-ATRP) method. The grafted p(GMA) fibrous chains on the beads were modified with an affinity ligand (i.e., agmatine). The binding capacity of the affinity beads to SA was determined using aqueous solution of SA in a batch system. Batch adsorption studies showed that the amount of adsorbed SA was found to be 156.7 mg/g at 25 °C. The maximum adsorption capacity for affinity beads was observed at around pH 5.5. Adsorption of SA onto affinity beads significantly increased with increasing temperature, and reached a value 177.8 mg/g beads at 35 °C. The equilibrium data were found to be well described by Langmuir model, while the kinetic data were well fitted to the pseudo-second-order kinetic. The degree of the purity of SA was determined by using HPLC. Before and after adsorption, the peak areas of SA were used in the calculation of separated SA.     

Immobilization and stabilization of papain on poly(hydroxyethyl methacrylate-ethylenglycol dimethacrylate) beads grafted with epoxy functional polymer chains via surface-initiated-atom transfer radical polymerization (SI-ATRP)

Poly(hydroxyethyl methacrylate–ethylen glycol dimethacrylate), p(HEMA–EGDMA), beads were prepared by suspension polymerization, and were decorated with fibrous poly(glycidyl methacrylate), p(GMA), via surface initiated-atom transfer radical polymerization (SI-ATRP). The functional epoxy groups of the beads were used for covalent immobilization of papain. The average amount of immobilized enzyme was 18.7 mg/g beads. The immobilized enzyme was characterized by temperature, pH, operational and storage stability experiments. The maximum velocity of the free and immobilized enzymes (V_max) and Michaelis–Menten constant (K_m) values were determined as 10.7 and 8.3 U/mg proteins and 274 and 465 μM, respectively. The immobilized papain was operated in a batch reactor, and it was very effective for hydrolysis of different proteins (i.e., casein and cytochrom c).     

An approach for the improved immobilization of penicillin G acylase onto macroporous poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) as a potential industrial biocatalyst

The use of penicillin G acylase (PGA) covalently linked to insoluble carrier is expected to produce major advances in pharmaceutical processing industry and the enzyme stability enhancement is still a significant challenge. The objective of this study was to improve catalytic performance of the covalently immobilized PGA on a potential industrial carrier, macroporous poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) [poly(GMA‐co‐EGDMA)], by optimizing the copolymerization process and the enzyme attachment procedure. This synthetic copolymer could be a very promising alternative for the development of low‐cost, easy‐to‐prepare, and stable biocatalyst compared to expensive commercially available epoxy carriers such as Eupergit or Sepabeads. The PGA immobilized on poly(GMA‐co‐EGDMA) in the shape of microbeads obtained by suspension copolymerization appeared to have higher activity yield compared to copolymerization in a cast. Optimal conditions for the immobilization of PGA on poly(GMA‐co‐EGDMA) microbeads were 1 mg/mL of PGA in 0.75 mol/L phosphate buffer pH 6.0 at 25°C for 24 h, leading to the active biocatalyst with the specific activity of 252.7 U/g dry beads. Chemical amination of the immobilized PGA could contribute to the enhanced stability of the biocatalyst by inducing secondary interactions between the enzyme and the carrier, ensuring multipoint attachment. The best balance between the activity yield (51.5%), enzyme loading (25.6 mg/g), and stability (stabilization factor 22.2) was achieved for the partially modified PGA. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 32:43–53, 2016     

Reversible immobilization of Candida rugosa lipase on fibrous polymer grafted and sulfonated p(HEMA/EGDMA) beads

Poly(2-hydroxyethyl methacrylate/ethylenglycol dimethacrylate) beads were grafted with poly(glycidylmethacrylate) via surface initiated atom transfer radical polymerization. Epoxy groups of the grafted polymer were modified in to sulfone groups. Sulfonated beads were characterized by swelling studies, FT-IR, SEM and elemental analysis, and were used for reversible immobilization of lipase. Under given experimental conditions, the beads had an adsorption capacity of 44.7 mg protein/g beads. The adsorbed lipase on beads retained up to 67.4% of its initial activity. The immobilized lipase exhibited improved thermal and storage stabilities over those of the free enzyme. The immobilized lipase could desorb 1.0 M NaCl solution at pH 8.0, and the sulfonated beads can be repeatedly charged with fresh enzyme after inactivation upon use.     

Hydrazide-functionalized poly(2-hydroxyethyl methacrylate) microspheres for immobilization of horseradish peroxidase

Nonporous cross-linked poly(2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) (poly(HEMA-co-EDMA)) microspheres were prepared by dispersion polymerization of HEMA and EDMA. The polymerization was performed in toluene/2-methylpropan-1-ol in the presence of cellulose acetate butyrate as a steric stabilizer and dibenzoyl peroxide initiator. The particle size may be increased by decreasing the toluene/2-methylpropan-1-ol ratio and by increasing polymerization temperature. Adipohydrazide was attached to the microspheres activated with 2,4,6-trichloro-1,3,5-triazine. After periodate oxidation of its carbohydrate moieties, horseradish peroxidase was coupled to the hydrazide-functionalized poly(HEMA-co-EDMA) microparticles up to 7.3 microgram of enzyme/g of carrier without a significant loss of its activity. Immobilized peroxidase was found to be stable, retaining more than 97% of its initial activity when stored for 23 days after the preparation.     

In situ preparation of peptidylated polymers as ready-to-use adsorbents for rapid immunoaffinity chromatography

Summary The preparation method of peptide ligands employing polymer-supported solid-phase synthesis and leading to biospecific sorbents has been designed and optimized. This approach directly affords porous polymer sorbents for biospecific chromatography and avoids the cleavage of the synthesized peptide moieties from the carrier and their isolation. The specifics of both peptide synthesis and biospecific chromatography using hydrophilic macroporous polymer supports based on porous poly(glycidyl methacrylate-co-ethylene dimethacrylate) beads and discs were also investigated. The protecting groups can be removed from the target peptide (bradykinin) attached to the polymer support by trifluoromethylsulfonic acid without any significant loss of the attached peptide from the polymer carrier. Introduction of styrene as a comonomer into the copolymer structure improves the reactivity of the support. However, no nonspecific adsorption of proteins in the course of the biospecific isolation of antibradykinin antibodies was observed with these media. In contrast, the nonspecific sorption of proteins increases as a result of increasing peptide loading.     

Synthesis and characterization of pseudo-affinity ligand for penicillin acylase purification

The aim of this work was to test a chromatographic affinity support containing methacryloyl antipyrine (MAAP) for penicillin acylase (PA) purification by using pure penicillin acylase and crude extract. First, MAAP as a pseudo-specific ligand was synthesized by using methacryloyl chloride and 4-aminoantipyrine. Polymer beads (average size diameter: 40–120 μm) were prepared by suspension polymerization of ethylene glycol dimethacrylate (EGDMA) and MAAP. This approach for the preparation of adsorbent has several advantages over conventional preparation protocols. An expensive and time consuming step in the preparation of adsorbent is immobilization of a ligand to the adsorption matrix. In this procedure, affinity ligand MAAP acts as comonomer without further modification steps. Poly(EGDMA-MAAP) beads were characterized by FTIR, NMR and screen analysis. Elemental analysis of MAAP for nitrogen was estimated as 89.3 μmol/g. The prepared adsorbent was then used for the capture of penicillin acylase in batch system. The maximum penicillin acylase adsorption capacity of the poly(EGDMA-MAAP) beads was found to be 82.2 mg/g at pH 5.0. Chromatography with crude feedstock resulted in 23.2-fold purification and 93% recovery with 1.0 M NaOH.     

Immobilization of laccase onto spacer-arm attached non-porous poly(GMA/EGDMA) beads: application for textile dye degradation

Non-porous poly(glycidyl methacrylate/ethyleneglycol dimetacrylate) (poly(GMA/EGDMA)) beads were prepared by suspension polymerization. The enzyme (i.e. laccase) was covalently immobilized onto plain and spacer-arm attached poly(GMA/EGDMA) beads. The amount of immobilized enzyme on the plain and spacer-arm attached beads was determined as 5.6 and 4.9 mg/g, respectively. The maximum activity (V(max)) and Michaelis constant (K(m)) of laccase immobilized on the spacer-arm attached beads, were found to be 77.6 U/min and 0.47 mM, respectively. Finally, the immobilized laccase was operated in a batch system, and textile dye Reactive Red 120 was successfully decolorized in the enzyme reactor.     

Fabrication and characterization of tosyl‐activated magnetic and nonmagnetic monodisperse microspheres for use in microfluic‐based ferritin immunoassay

This article describes the preparation of tosyl‐activated nonmagnetic poly(2‐hydroxyethyl methacrylate‐co‐glycidyl methacrylate) [P(HEMA‐GMA)] microspheres by dispersion polymerization and tosyl‐activated magnetic poly(2‐hydroxyethyl methacrylate‐co‐ethylene dimethacrylate) [P(HEMA‐EDMA)] microspheres by multistep swelling polymerization method and precipitation of iron oxide inside the pores. These new approaches show that monodisperse microspheres, 2.3 µm, respectively 4.1 µm, in diameter can be produced in high yields avoiding aggregation and with the advantage of being free of aromatic moieties. To demonstrate their potential for diagnostic applications, both types of microparticles have been coated with capture and detection antibodies (DAs), respectively. Immunoassay protocols have then been developed for the dosage of ferritin using an automated affinity platform combining microchannel chips and electrochemical detection. The assay performance using the above magnetic microspheres has been compared with that obtained with commercial tosyl‐activated beads. Finally, the possibility to combine functionalized magnetic and nonmagnetic microspheres has been evaluated in view of amplifying the number of enzymatic labels in the immuno‐complex. At a ferritin concentration of 119.6 ng/mL, a signal‐to‐noise ratio of 150.5 is obtained using 0.2 mg/mL of anti‐ferritin‐coated P(HEMA‐GMA)‐DA microspheres against a value of 158.8 using free DA in solution. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29: 532–542, 2013     

Surface hydrophilic modification with well-defined glycopolymer for protein imprinting matrix

Well-defined lactose-containing glycopolymer has been synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization with (4-cyanopentanoic acid)-4- dithiobenozoate (CAD) as chain transfer agent. The glycopolymer was introduced onto the exterior surfaces of the bovine serum albumin (BSA) imprinted polymer beads by grafting copolymerization with methyl methacrylate and ethylene glycol dimethacrylate. After alcoholysis, the hydrophilic lactose residues of glycopolymer will stretched on the surface of the MIP beads and then the hydrophilicity of the surface will be enhanced. Rebinding test shows that the glycopolymer hydrophilic modified BSA imprinted polymer presents higher performance selectivity than that of unmodified one, which means that the hydrophobic-hydrophilic balance of the imprinted polymer surface is in favor of the improvement of specific recognition property of the material.