Zobellella denitrificans strain MW1, a newly isolated bacterium suitable for poly(3-hydroxybutyrate) production from glycerol

Aims: To search for new bacteria for efficient production of polyhydroxyalkanoates (PHAs) from glycerol. Methods and Results: Samples were taken from different environments in Germany and Egypt, and bacteria capable of growing in mineral salts medium with glycerol as sole carbon source were enriched. From a wastewater sediment sample in Egypt, a Gram‐negative bacterium (strain MW1) was isolated that exhibited good growth and that accumulated considerable amounts of polyhydroxybutyrate (PHB) from glycerol and also from other carbon sources. The 16S rRNA gene sequence of this isolate exhibited 98·5% and 96·2% similarity to Zobellella denitrificans strain ZD1 and to Zobellella taiwanensis strain ZT1 respectively. The isolate was therefore affiliated as strain MW1 of Z. denitrificans. Strain MW1 grows optimally on glycerol at 41°C and pH 7·3 and accumulated PHB up to 80·4% (w/w) of cell dry weight. PHB accumulation was growth‐associated. Although it was not an absolute requirement, 20 g l^?1 sodium chloride enhanced both growth (5 g cell dry weight per litre) and PHB content (87%, w/w). Zobellella denitrificans strain MW1 is also capable to accumulate the poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) copolymer if sodium propionate was used as cosubstrate in addition to glycerol. Conclusions: A new PHB‐accumulating strain was isolated and identified. This strain is able to utilize glycerol for growth and PHB accumulation to high content especially in the presence of NaCl that will enable the utilization of waste glycerol from biodiesel industry. Significance and Impact of the Study: This study is the first report on accumulation of PHA in a member of the new genus Zobellella. Furthermore, utilization of glycerol as the sole carbon source for fast growth and PHB biosynthesis, growth in the presence of NaCl and high PHB contents of the cells will make this newly isolated bacterium a potent candidate for industrial production of PHB from crude glycerol occurring as byproduct during biodiesel production.     

Production and characterization of poly‐3‐hydroxybutyrate from biodiesel‐glycerol by Burkholderia cepacia ATCC 17759

Glycerol, a byproduct of the biodiesel industry, can be used by bacteria as an inexpensive carbon source for the production of value‐added biodegradable polyhydroxyalkanoates (PHAs). Burkholderia cepacia ATCC 17759 synthesized poly‐3‐hydroxybutyrate (PHB) from glycerol concentrations ranging from 3% to 9% (v/v). Increasing the glycerol concentration results in a gradual reduction of biomass, PHA yield, and molecular mass (M_n and M_w) of PHB. The molecular mass of PHB produced utilizing xylose as a carbon source is also decreased by the addition of glycerol as a secondary carbon source dependent on the time and concentration of the addition. ¹H‐NMR revealed that molecular masses decreased due to the esterification of glycerol with PHB resulting in chain termination (end‐capping). However, melting temperature and glass transition temperature of the end‐capped polymers showed no significant difference when compared to the xylose‐based PHB. The fermentation was successfully scaled up to 200 L for PHB production and the yield of dry biomass and PHB were 23.6 g/L and 7.4 g/L, respectively. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

Peroxisomal polyhydroxyalkanoate biosynthesis is a promising strategy for bioplastic production in high biomass crops

Polyhydroxyalkanoates (PHAs) are bacterial carbon storage polymers with diverse plastic‐like properties. PHA biosynthesis in transgenic plants is being developed as a way to reduce the cost and increase the sustainability of industrial PHA production. The homopolymer polyhydroxybutyrate (PHB) is the simplest form of these biodegradable polyesters. Plant peroxisomes contain the substrate molecules and necessary reducing power for PHB biosynthesis, but peroxisomal PHB production has not been explored in whole soil‐grown transgenic plants to date. We generated transgenic sugarcane (Saccharum sp.) with the three‐enzyme Ralstonia eutropha PHA biosynthetic pathway targeted to peroxisomes. We also introduced the pathway into Arabidopsis thaliana, as a model system for studying and manipulating peroxisomal PHB production. PHB, at levels up to 1.6%–1.8% dry weight, accumulated in sugarcane leaves and A. thaliana seedlings, respectively. In sugarcane, PHB accumulated throughout most leaf cell types in both peroxisomes and vacuoles. A small percentage of total polymer was also identified as the copolymer poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) in both plant species. No obvious deleterious effect was observed on plant growth because of peroxisomal PHA biosynthesis at these levels. This study highlights how using peroxisomal metabolism for PHA biosynthesis could significantly contribute to reaching commercial production levels of PHAs in crop plants.     

Screening of bacterial strains capable of converting biodiesel‐derived raw glycerol into 1,3‐propanediol, 2,3‐butanediol and ethanol

The ability of bacterial strains to assimilate glycerol derived from biodiesel facilities to produce metabolic compounds of importance for the food, textile and chemical industry, such as 1,3‐propanediol (PD), 2,3‐butanediol (BD) and ethanol (EtOH), was assessed. The screening of 84 bacterial strains was performed using glycerol as carbon source. After initial trials, 12 strains were identified capable of consuming raw glycerol under anaerobic conditions, whereas 5 strains consumed glycerol under aerobiosis. A plethora of metabolic compounds was synthesized; in anaerobic batch‐bioreactor cultures PD in quantities up to 11.3 g/L was produced by Clostridium butyricum NRRL B‐23495, while the respective value was 10.1 g/L for a newly isolated Citrobacter freundii. Adaptation of Cl. butyricum at higher initial glycerol concentration resulted in a PD_max concentration of ～32 g/L. BD was produced by a new Enterobacter aerogenes isolate in shake‐flask experiments, under fully aerobic conditions, with a maximum concentration of ～22 g/L which was achieved at an initial glycerol quantity of 55 g/L. A new Klebsiella oxytoca isolate converted waste glycerol into mixtures of PD, BD and EtOH at various ratios. Finally, another new C. freundii isolate converted waste glycerol into EtOH in anaerobic batch‐bioreactor cultures with constant pH, achieving a final EtOH concentration of 14.5 g/L, a conversion yield of 0.45 g/g and a volumetric productivity of ～0.7 g/L/h. As a conclusion, the current study confirmed the utilization of biodiesel‐derived raw glycerol as an appropriate substrate for the production of PD, BD and EtOH by several newly isolated bacterial strains under different experimental conditions.     

New insights in the formation of polyhydroxyalkanoate granules (carbonosomes) and novel functions of poly(3‐hydroxybutyrate)

The metabolism of polyhydroxybutyrate (PHB) and related polyhydroxyalkanoates (PHAs) has been investigated by many groups for about three decades, and good progress was obtained in understanding the mechanisms of biosynthesis and biodegradation of this class of storage molecules. However, the molecular events that happen at the onset of PHB synthesis and the details of the initiation of PHB/PHA granule formation, as well as the complex composition of the proteinaceous surface layer of PHB/PHA granules, have only recently come into the focus of research and were not reviewed yet. In this contribution, we summarize the progress in understanding the initiation and formation of the PHA granule complex at the example of Ralstonia eutropha H16 (model organism of PHB‐accumulating bacteria). Where appropriate, we include information on PHA granules of Pseudomonas putida as a representative species for medium‐chain‐length PHA‐accumulating bacteria. We suggest to replace the previous micelle mode of PHB granule formation by the Scaffold Model in which the PHB synthase initiation complex is bound to the bacterial nucleoid. In the second part, we highlight data on other forms of PHB: oligo‐PHB with ≈100 to 200 3‐hydroxybutyrate (3HB) units and covalently bound PHB (cPHB) are unrelated in function to storage PHB but are presumably present in all living organisms, and therefore must be of fundamental importance.     

Isolation of a thermotolerant bacterium producing medium-chain-length polyhydroxyalkanoate

Aims:  The aim of this study was to isolate a thermotolerant micro‐organism that produces polyhydroxyalkanoates (PHAs) composed of medium‐chain‐length (mcl) HA units from a biodiesel fuel (BDF) by‐product as a carbon source. Methods and Results:  We successfully isolated a thermotolerant micro‐organism, strain SG4502, capable to accumulate mcl‐PHA from a BDF by‐product as a carbon source at a cultivation temperature of 45°C. The strain could also produce mcl‐PHA from acetate, octanoate and dodecanoate as sole carbon sources at cultivation temperatures up to 55°C. Taxonomic studies and 16S rRNA gene sequence analysis revealed that strain SG4502 was phylogenetically affiliated with species of the genus Pseudomonas. This study is the first report of PHA synthesis by a thermotolerant Pseudomonas. Conclusions:  A novel thermotolerant bacterium capable to accumulate mcl‐PHA from a BDF by‐product was successfully isolated. Significance and Impact of the Study:  A major issue regarding industrial production of microbial PHAs is their much higher production cost compared with conventional petrochemical‐based plastic materials. Especially significant are the cost of a fermentative substrate and the running cost to maintain a temperature suitable for microbial growth. Thus, strain SG4502, isolated in this study, which assimilates BDF by‐product and produces PHA at high temperature, would be very useful for practical application in industry.     

Reduced peroxisomal citrate synthase activity increases substrate availability for polyhydroxyalkanoate biosynthesis in plant peroxisomes

Polyhydroxyalkanoates (PHAs) are bacterial carbon storage polymers used as renewable, biodegradable plastics. PHA production in plants may be a way to reduce industrial PHA production costs. We recently demonstrated a promising level of peroxisomal PHA production in the high biomass crop species sugarcane. However, further production strategies are needed to boost PHA accumulation closer to commercial targets. Through exogenous fatty acid feeding of Arabidopsis thaliana plants that contain peroxisome‐targeted PhaA, PhaB and PhaC enzymes from Cupriavidus necator, we show here that the availability of substrates derived from the β‐oxidation cycle limits peroxisomal polyhydroxybutyrate (PHB) biosynthesis. Knockdown of peroxisomal citrate synthase activity using artificial microRNA increased PHB production levels approximately threefold. This work demonstrates that reduction of peroxisomal citrate synthase activity may be a valid metabolic engineering strategy for increasing PHA production in other plant species.     

Microbial synthesis of polyhydroxybutyrate from glycerol: Gluconeogenesis, molecular weight and material properties of biopolyester

Glycerol is considered as an ideal feedstock for producing bioplastics via bacterial fermentation due to its ubiquity, low price, and high degree of reduction substrate. In this work, we study the yield and cause of limitation in poly(3‐hydroxybutyrate) (PHB) production from glycerol. Compared to glucose‐based PHB production, PHB produced by Cupriavidus necator grown on glycerol has a low productivity (0.92 g PHB/L/h) with a comparably low maximum specific growth rate of 0.11 h^?1. We found that C. necator can synthesize glucose from glycerol and that the lithotrophical utilization of glycerol (non‐fermentative substrate) or gluconeogenesis is an essential metabolic pathway for biosynthesis of cellular components. Here, we show that gluconeogenesis affects the reduction of cell mass, the productivity of biopolymer product, and the molecular chain size of intracellular PHB synthesized from glycerol by C. necator. We use NMR spectroscopy to show that the isolated PHB is capped by glycerol. We then characterized the physical properties of the isolated glycerol‐based PHB with differential scanning calorimetry and tensile tests. We found that although the final molecular weight of the glycerol‐based PHB is lower than those of glucose‐based and commercial PHB, the thermal and mechanical properties of the biopolymers are similar. Biotechnol. Bioeng. 2012; 109: 2808–2818. © 2012 Wiley Periodicals, Inc.     

Polyhydroxyalkanoates production from carbohydrates by a genetic recombinant Aeromonas sp.

Aims: To develop an Aeromonas strain able to utilize inexpensive carbon sources such as starch for the synthesis of polyhydroxyalkanoates (PHA). Methods and Results: A recombinant Aeromonas sp. (strain KC007‐1) was constructed by introducing the PHB synthesis genes (phaCAB) into the bacterium. Strain KC001‐R1 can not only use carbohydrate (including starch) for growth but also accumulate significant amounts of polyhydroxybutyrate (PHB) in the cells. Conclusions: One of the present focuses on PHA production has been on lowering the production costs. Starch is an example of an inexpensive carbohydrate for use in industrial production of PHA. We have demonstrated that by introducing the phaCAB operon into Aeromonas sp. allowed the bacterium able to accumulated PHB using this substrate. Significance and Impact of the Study: Aeromonas spp. are able to synthesize PHA using fatty acids as carbon source. Although good robust growth results with use of starch as sole carbon source for Aeromonas, PHA synthesis does not occur. Strain KC007‐R1 showed the ability to accumulate PHA in relative high amount with both carbohydrates and fatty acids as carbon source, and can be cultivated to a significant amount of cell mass and hence is a potential strain for further development for industrial applications.     

Effects of Granule-Associated Protein PhaP on Glycerol-Dependent Growth and Polymer Production in Poly(3-Hydroxybutyrate)-Producing Escherichia coli

Polyhydroxyalkanoates (PHAs) are accumulated as intracellular granules by many bacteria under unfavorable conditions, enhancing their fitness and stress resistance. Poly(3-hydroxybutyrate) (PHB) is the most widespread and best-known PHA. Apart from the genes that catalyze polymer biosynthesis, natural PHA producers have several genes for proteins involved in granule formation and/or with regulatory functions, such as phasins, that have been shown to affect polymer synthesis. This study evaluates the effect of PhaP, a phasin, on bacterial growth and PHB accumulation from glycerol in bioreactor cultures of recombinant Escherichia coli carrying phaBAC from Azotobacter sp. strain FA8. Cells expressing phaP grew more, and accumulated more PHB, both using glucose and using glycerol as carbon sources. When cultures were grown in a bioreactor using glycerol, PhaP-bearing cells produced more polymer (2.6 times) and more biomass (1.9 times) than did those without the phasin. The effect of this protein on growth promotion and polymer accumulation is expected to be even greater in high-density cultures, such as those used in the industrial production of the polymer. The recombinant strain presented in this work has been successfully used for the production of PHB from glycerol in bioreactor studies, allowing the production of 7.9 g/liter of the polymer in a semisynthetic medium in 48-h batch cultures. The development of bacterial strains that can efficiently use this substrate can help to make the industrial production of PHAs economically feasible.     

Production of PHB from Crude Glycerol

Crude glycerol – a by‐product of the large scale production of diesel oil from rape – is examined for its possible use as a cheap feedstock for the biotechnological synthesis of poly(3‐hydroxybutyrate) (PHB). The glycerol samples of various manufacturers differ in their contamination with salts (NaCl or K₂SO₄), methanol or fatty acids. At high cell density fermentation these pollutants could possibly accumulate to inhibiting concentrations. The bacteria used were Paracoccus denitrificans and Cupriavidus necator JMP 134, which accumulate PHB from pure glycerol to a content of 70 % of cell dry mass. When using crude glycerol containing 5.5 % NaCl, a reduced PHB content of 48 % was observed at a bacterial dry mass of 50 g/L. Furthermore the PHB yield coefficient was reduced, obviously due to osmoregulation. The effect of glycerol contaminated with K₂SO₄ was less pronounced. The molecular weight of PHB produced with P. denitrificans or C. necator from crude glycerol varies between 620000 and 750000 g/mol which allows the processing by common techniques of the polymer industry.     

Isolation of bacteria producing polyhydroxyalkanoates (PHA) from municipal sewage sludge

Bacterial isolates from sludge samples collected at a local municipal sewage treatment plant were screened for bacteria producing polyhydroxyalkanoates (PHA). Initially Sudan black B staining was performed to detect lipid cellular inclusions. Lipid-positive isolates were then grown in a nitrogen limitation E2 medium containing 2% (w/v) glucose to promote accumulation of PHA before the subsequent staining with Nile blue A. The positive isolates were quantified initially with a u.v. spectrophotometer, for a very large number of isolates (105) and among them high PHA-producing isolates (15) were selected and were confirmed by gas chromatographic analysis. The GC analysis showed the polymers produced by 13 of the selected isolates to be polyhydroxybutyrate (PHB), and the remaining two isolates produced polyhydroxybutyrate-co-hydroxyvalerate (PHB-co-HV) copolymer. The proportion of the PHA-positive bacterial isolates showed variability in the number of PHA accumulators during various months. The correlation of PHB production with the cell dry weight (CDW) was found to be statistically significant. The metabolism of PHB in these selected 15 isolates was studied using the Nile blue A staining, which showed an initial increase in the fluorescence followed by a decline, on further incubation. All the selected 15 isolates were classified to genus level by studying their morphological and biochemical characteristics. There were seven Bacillus species, three Pseudomonas species, two Alcaligenes species, two Aeromonas species, and one Chromobacterium species.     

Poly(3-Hydroxybutyrate) Production from Glycerol by Zobellella denitrificans MW1 via High-Cell-Density Fed-Batch Fermentation and Simplified Solvent Extraction

Industrial production of biodegradable polyesters such as polyhydroxyalkanoates is hampered by high production costs, among which the costs for substrates and for downstream processing represent the main obstacles. Inexpensive fermentable raw materials such as crude glycerol, an abundant by-product of the biodiesel industry, have emerged to be promising carbon sources for industrial fermentations. In this study, Zobellella denitrificans MW1, a recently isolated bacterium, was used for the production of poly(3-hydroxybutyrate) (PHB) from glycerol as the sole carbon source. Pilot-scale fermentations (42-liter scale) were conducted to scale up the high PHB accumulation capability of this strain. By fed-batch cultivation, at first a relatively high cell density (29.9 ± 1.3 g/liter) was obtained during only a short fermentation period (24 h). However, the PHB content was relatively low (31.0% ± 4.2% [wt/wt]). Afterwards, much higher concentrations of PHB (up to 54.3 ± 7.9 g/liter) and higher cell densities (up to 81.2 ± 2.5 g/liter) were obtained by further fed-batch optimization in the presence of 20 g/liter NaCl, with optimized feeding of glycerol and ammonia to support both cell growth and polymer accumulation over a period of 50 h. A high specific growth rate (0.422/h) and a short doubling time (1.64 h) were attained. The maximum PHB content obtained was 66.9% ± 7.6% of cell dry weight, and the maximum polymer productivity and substrate yield coefficient were 1.09 ± 0.16 g/liter/h and 0.25 ± 0.04 g PHB/g glycerol, respectively. Furthermore, a simple organic solvent extraction process was employed for PHB recovery during downstream processing: self-flotation of cell debris after extraction of PHB with chloroform allowed a convenient separation of a clear PHB-solvent solution from the cells. Maximum PHB recovery (85.0% ± 0.10% [wt/wt]) was reached after 72 h of extraction with chloroform at 30°C, with a polymer purity of 98.3% ± 1.3%.Polyhydroxybutyrate (PHB) is the best-studied example of biodegradable polyesters belonging to the group of polyhydroxyalkanoates (PHAs), which are synthesized by many bacteria and archaea as intracellular carbon and energy reserves (1, 40, 43). In the last decades, these biopolymers have received great attention due to their properties which resemble those of conventional petrochemical-based polymers (49). For instance, PHB is very similar to thermoplastic polypropylene (17). Their production from renewable resources and their complete biodegradability give PHAs promising advantages from an environmental point of view (6). In addition to their special physical traits, such as the elasticity of medium-chain-length PHAs and the high crystallization rate of PHB, PHAs are biocompatible, water resistant, oxygen impermeable, and enantiomerically pure; all of these characteristics broaden the scope of their applications in industry and medicine.So far, higher production costs than those of petrochemical plastics have hindered the successful commercialization of PHB (9). Many efforts have been devoted to reducing the production costs by developing superior microbial strains capable of utilizing cheap substrates and also by applying more efficient fermentation strategies and economical recovery processes (10).Fed-batch fermentation regimens are usually applied to achieve a high cell density, which is necessary for a high productivity and yield, in particular in cases of intracellular products, by frequent or continuous feeding of nutrients when growth proceeds (46). Several fed-batch fermentation processes have been reported for PHA production (21, 28). There are two prevalent cultivation modes for PHB production that are imposed on the microorganisms being used. The more frequently used mode is realized by a complex two-stage cultivation process. In this mode, all nutrients needed for growth to a high cell density are provided during the first phase of the process. In the second phase, imbalanced growth conditions are enforced by providing growth-limiting amounts of nutrients such as nitrogen, phosphate, or oxygen to trigger PHA biosynthesis and accumulation. The model organism for this mode is Ralstonia eutropha (formerly known as Alcaligenes eutrophus and recently reclassified as Cupriavidus necator) (26, 27). In the other cultivation mode, PHB is accumulated concurrently with growth, and therefore a single-stage process is applicable. A well-known example of this mode is PHB production by Alcaligenes latus (18, 47).Although several new downstream processes for the extraction of PHA have been reported as being economically effective, such as the application of surfactants and hypochlorite (9, 38), dispersions of hypochlorite solution and chloroform (14, 15), and the selective dissolution of cell mass by proteolytic enzymes (25) or by sulfuric acid and hypochlorite (48), solvent extraction methods are still regarded as an adequate way to gain intact polymers with a high purity and recovery yield (39). However, there is still a need to develop and improve these extraction methods further to make the entire process much simpler and cheaper (22).In addition to increased prices for crude oil, the abundance of inexpensive raw materials from agriculture and industry as cheap substrates for microbial fermentations, such as crude glycerol from the biodiesel industry, could make the production of PHA from renewable resources more competitive with common plastics (32). Due to increased glycerol production by the growing biodiesel industry, the prices for glycerol became low enough to make this residual compound a cheap carbon source for several industrial fermentation processes, especially for the production of microbial polyesters (11, 34). However, the various amounts of actual fermentable substrates and the presence of other nonfermentable components in feedstock, such as the various concentrations of glycerol and salts in biodiesel coproducts, hinder their use (42). Therefore, tolerant bioprocesses and/or strains tolerant to such variable factors are required.The production of PHA from glycerol has been investigated in only a few studies (4, 12, 24, 33, 42). In a recent study (32), crude glycerol from different biodiesel manufacturers was examined for suitability as a substrate for PHB production. However, significant decreases in PHB productivity and product yields were recorded when NaCl-contaminated crude glycerol was used.Recently, a newly isolated bacterium, Zobellella denitrificans MW1, was characterized as producing large amounts of PHB from glycerol, with enhanced growth and polymer productivity in the presence of NaCl (20). The present study aimed at developing a strategy to improve the volumetric production of PHB by Z. denitrificans MW1, using glycerol as the sole carbon source. For this purpose, several fed-batch cultivations were set up to steadily improve the nutrient supply to attain a high cell density and high PHB productivity. Moreover, the conventional organic solvent extraction method was modified with regard to an economically more feasible large-scale PHB extraction, achieving a high purity and recovery of the polymer.     

Purification, immobilization, and characterization of nattokinase on PHB nanoparticles

In this study, nattokinase was purified from Bacillus subtilis using ion exchange chromatography and immobilized upon polyhydroxybutyrate (PHB) nanoparticles. A novel strain isolated from industrial dairy waste was found to synthesize polyhydroxyalkanoates (PHA) and the strain was identified as Brevibacterium casei SRKP2. PHA granules were extracted from 48 h culture and the FT-IR analysis characterized them as PHB, a natural biopolymer from B. casei. Nanoprecipitation by solvent displacement technique was used to synthesize PHB nanoparticles. PHB nanoparticles were characterized using transmission electron microscopy and particle size ranged from 100–125 nm. Immobilization of nattokinase upon PHB nanoparticles resulted in a 20% increase in the enzyme activity. Immobilization also contributed to the enhanced stability of the enzyme. Moreover, the activity was completely retained on storage at 4 °C for 25 days. The method has proven to be highly simple and can be implemented to other enzymes also.     

Polyhydroxybutyrate synthesis on biodiesel wastewater using mixed microbial consortia

Crude glycerol (CG), a by-product of biodiesel production, is an organic carbon-rich substrate with potential as feedstock for polyhydroxyalkanoate (PHA) production. PHA is a biodegradable thermoplastic synthesized by microorganisms as an intracellular granule. In this study we investigated PHA production on CG using mixed microbial consortia (MMC) and determined that the enriched MMC produced exclusively polyhydroxybutyrate (PHB) utilizing the methanol fraction. PHB synthesis appeared to be stimulated by a macronutrient deficiency. Intracellular concentrations remained relatively constant over an operational cycle, with microbial growth occurring concurrent with polymer synthesis. PHB average molecular weights ranged from 200-380 kDa, while thermal properties compared well with commercial PHB. The resulting PHB material properties and characteristics would be suitable for many commercial uses. Considering full-scale process application, it was estimated that a 38 million L (10 million gallon) per year biodiesel operation could potentially produce up to 19 metric ton (20.9t on) of PHB per year.     

Vegetative compatibility of an isolate ofVerticillium dahliae pathogenic to both tomato and pepper

An isolate ofVerticillum dahliae Vdp-4, pathogenic to both tomato and pepper (tomato-pepper pathotype), was examined for its vegetative compatibility with testers of the Japanese vegetative compatibility group (subgroups J1, J2, and J3). Seven isolates ofV. dahliae from the same field as Vdp-4 in Misato, Nagano Pref. and two isolates from Hokkaido were separately determined as either tomato pathotype (B) or pepper pathotype (C). Isolate 5922 previously reported as tomato-pepper pathotype was also examined. Compatiblenit1 and NitM mutants were obtained from all isolates except for isolates Vdp-3 and Vdt-10. The isolate of tomato-pepper pathotype Vdp-4 showed a strong reaction with VCGJ1 and J3 and was thus assigned to J3. Seven of these isolates showed compatibility and were assigned into three provisional subgroups. The isolate 5922 was self-incompatible.     

Accumulation of Poly (3-Hydroxybutyric Acid) by Some Soil Streptomyces

In a limited-scale survey, 55 soil streptomycetes were screened for the accumulation of poly (3-hydroxybutyrate) [PHB]. Only 18% of the isolates accumulated PHB ranging between 1.9–7.8% of the dry biomass. The promising isolate DBCC-719, identified as Streptomyces griseorubiginosus, accumulated PHB amounting to 9.5% of the mycelial dry mass in the early stationary phase when grown in chemically defined medium with 2% (wt/vol) glucose as the sole source of carbon. Nitrogen-limiting conditions were inhibitory to growth and PHB accumulation. The isolated polymer was highly soluble in chloroform, gave a sharp peak at 235 nm on digestion with concentrated H₂SO₄, and had a characteristic infrared spectrum. Received: 26 March 1999 / Accepted: 3 May 1999     

Production and characterization of bacterial polyhydroxyalkanoate copolymers and evaluation of their blends by fourier transform infrared spectroscopy and scanning electron microscopy

Rhizobium meliloti produced a copolymer of short chain length polyhydroxyalkanoate (scl-PHA) on sucrose and rice bran oil as carbon substrates. Recombinant Escherichia coli (JC7623ABC1J4), bearing PHA synthesis genes, was used to synthesize short chain length-co-medium chain length PHA (scl-co-mcl-PHA) on glucose and decanoic acid. Fourier transform infrared spectroscopy (FTIR) spectra of the PHAs indicated strong characteristic bands at 1282, 1723, and 2934 cm⁻¹ for scl-PHA and at 2933 and 2976 cm⁻¹ for scl-co-mcl-PHA polymer. Differentiation of polyhydroxybutyrate (PHB) and polyhydroxybutyrate-co-hydroxyvalerate-P(HB-co-HV) copolymer was obseverd using FTIR, with absorption bands at 1723 and 1281 for PHB, and at 1738, 1134, 1215 cm⁻¹ for HV-copolymer. The copolymers were analyzed by GC and ¹H NMR spectroscopy. Films of polymer blends of PHA produced by R. meliloti and recombinant E. coli were prepared using glycerol, polyethylene glycol, polyvinyl acetate, individually (1:1 ratio), to modify the mechanical properties of the films and these films were evaluated by FTIR and scanning electron microscopy.     

Isolation of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) producer from Malaysian environment using γ-butyrolactone as carbon source

Samples from various natural environments in Peninsular Malaysia were screened for microorganisms that are capable of producing poly(3-hydroxybutyrate-co-4-hydroxybutyrate). A total of 663 isolates were isolated and 119 out of these isolates were identified as possible PHA producers based on Nile red staining methods. All these potential producers emitted pink fluorescence when grown on solid mineral salts medium (MSM) containing Nile red and exposed to UV light. The isolates obtained in this study were cultivated in MSM containing γ-butyrolactone as the carbon source. Gas chromatography (GC) analysis confirmed that 95 out of the 119 isolates were PHA producers. Among the 95 positive isolates, 77 isolates produced only P(3HB) homopolymer and 18 isolates produced PHA containing 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) monomers. Of these 18 isolates, USMAA1020 was screened as the best P(3HB-co-4HB) producer based on GC analysis. For further confirmation, PHA was extracted from the isolate and analyzed by GC as well as nuclear magnetic resonance (NMR). Results from both analyses confirmed that this isolate was capable of producing PHA containing 3HB and 4HB. Based on, biochemical characterization, 16S rRNA sequencing, DNA base composition, cellular fatty acids analysis and DNA–DNA hybridization, it is clearly indicated that this isolate belongs to the genus Cupriavidus. Poly(3HB-co-4HB) was synthesized by this bacterium in one-stage, two-stage and three-stage cultivation using γ-butyrolactone as the carbon source. The highest 4HB composition of 82 mol% was obtained through three-stage cultivation.