Encapsulation of Pt-labelled DNA Molecules inside Carbon Nanotubes

Experiments on encapsulating Pt--labelled DNA molecules inside multiwalled carbon nanotubes (MWCNT) were performed under temperature and pressure conditions of 400K and 3 Bar. The DNA-CNT hybrids were purified via agarose gel electrophoresis and analyzed via high resolution transmission electron microscopy (HR-TEM) and energy dispersive X-ray spectroscopy (EDX). The results showed that the Pt-labelled DNA molecules attached to the outside walls of CNTs could be removed by electrophoresis. The HR-TEM and EDX results demonstrated that 2-3% of the Pt-labelled DNA molecules were successfully encapsulated inside the MWCNTs. The experimental study complements our previous molecular dynamics simulations on encapsulation of single stranded DNA oligonucleotides inside single wall carbon nanotubes under similar conditions in water. The van der Waals interaction between CNT and Pt-labelled DNA is believed to be the main driving force for this phenomenon. The DNA-CNT molecular complex could be further explored for potential applications in bio-nanotechnology.     

Anionic complexes of MWCNT with supergiant cyanobacterial polyanions

Multi‐walled carbon nanotubes (MWCNTs) were well dispersed in an aqueous solution of the cyanobacterial polysaccharide, sacran, with an ultra‐high molecular weight >10 million g/mol. MWCNTs powder was put into aqueous solutions of various polysaccharides including sacran and was dispersed under sonication. As a result of the turbidity measurement of the supernatant, it was found that sacran showed the highest MWCNT‐dispersion efficiency of all the polysaccharides used here. Cryogenic transmission electron microscopic (Cryo‐TEM) studies directly demonstrated the existence of MWCNTs in the supernatant, and high‐resolution TEM observation revealed that MWCNTs covered by sacran chains made their efficient dispersion in water. Raman spectroscopy demonstrated the existence of MWCNT in dried sample from supernatant and the interaction between MWCNT and sacran. The ζ‐potential measurement of the dispersion indicated the negative surface charges of the sacran/MWCNT complexes. Then the MWCNT complexes were able to fabricate by ionic interaction; electrophoresis of the anionic complex formed the sacran/MWCNT gels on the anode while the droplet of sacran/MWCNT dispersion formed gel beads in the presence of the lanthanoid cations. © 2012 Wiley Periodicals, Inc.     

System Optimization for the Development of Ultrasensitive Electronic Biosensors Using Carbon Nanotube Nanoelectrode Arrays

Vertically aligned multi-walled carbon nanotubes (MWCNTs) have been reported in fabricating nanoelectrode arrays. Further studies on optimizing this system for the development of ultrasensitive DNA sensors are reported here. The mechanical stability of the as-grown MWCNT array can be improved by polymer coating or SiO₂ encapsulation. The latter method provides excellent electronic and ionic insulation to the sidewall of MWCNTs and the underlying metal layer, which is investigated with electrochemical impedance spectroscopy. The insulation ensures well-defined nanoelectrode behavior. A method is developed for selectively functionalizing biomolecules at the open end of MWCNTs while keeping the SiO₂ surface passivated, using the unique graphitic chemistry. An ultrahigh sensitivity approaching the limit of fluorescence techniques is obtained with this system for DNA detection.     

Adsorption and adhesion of blood proteins and fibroblasts on multi-wall carbon nanotubes

This article concerns the investigation of blood protein adsorption on carbon paper and multi-wall carbon nanotubes (MWCNTs). Mouse fibroblast cell adhesion and growth on MWCNTs was also studied. The results showed that fibrinogen adsorption on carbon paper was much lower than that on MWCNTs, which means that platelets readily aggregate on the surface of MWCNTs. Mouse fibroblast cells implanted on MWCNTs tended to grow more prolifically than those implanted on carbon paper. The cell concentration observed on MWCNTs increased from 1.2×10⁵/mL for a single day culture to 2×10⁵/mL for a 7-day culture. No toxicity reaction was observed during the culturing period. These results indicated that MWCNTs possessed excellent tissue compatibility. Supported by open-program of State Key Laboratory of Bioelectronics, Southeast University.     

Inulinase immobilization on polyethylene glycol/polypyrrole multiwall carbon nanotubes producing a catalyst with enhanced thermal and operational stability

This paper describes the development of a simple method for mixed non‐covalent and covalent bonding of partially purified inulinase on functionalized multiwall carbon nanotubes (f‐MWCNTs) with polypyrrole (PPy). The pyrrole (Py) was electrochemically polymerized on MWCNTs in order to fabricate MWCNTs/PPy nanocomposite. Two multiple forms of enzyme were bound to N‐H functional groups from PPy and ‐COO^? from activated MWCNTs to yield a stable MWCNTs/PPy/PEG immobilized preparation with increased thermal stability. Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) were used to confirm functionalization of nanoparticles and immobilization of the enzyme. The immobilization yield of 85% and optimal enzyme load of 345 μg protein onto MWCNTs was obtained. The optimum reaction conditions and kinetic parameters were established using the UV‐Vis analytical assay. The best functional performance for prepared heterogeneous catalyst has been observed at pH 3.6 and 10, and at the temperatures of 60 and 80ºC. The half‐life (t_1/2) of the immobilized inulinase at 60 and 80ºC was found to be 231 and 99 min, respectively. The reusability of the immobilized formulation was evaluated based on a method in which the enzyme retained 50% of its initial activity, which occurred after the eighteenth operation cycle.     

Improved stability of the carbon nanotubes-enzyme bioconjugates by biomimetic silicification

Nano-materials have been applied in many fields due to their excellent characteristics, such as the high surface area-to-volume ratio, excellent physicochemical properties and biological compatibility. In this study, multi-walled carbon nanotubes (MWCNTs) were utilized to prepare MWCNTs-papain bioconjugates and then realized the immobilization of papain. MWCNTs functionalized with carboxyl- and amine- groups on their surface were used as immobilization carriers. The immobilization of papain on the functionalized MWCNTs through physical absorption was examined. The conjugates were denoted as MWCNTs-papain bioconjugates. To improve the stability, the bioconjugates were further coated by silica through the biomimetic silicification process that induced by papain (denoted as silica-coated bioconjugates). The as-prepared MWCNTs-papain bioconjugates and the silica-coated bioconjugates were characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. The preliminary results showed that the bioconjugates could retain most of the initial activity of papain. Compared to free papain and MWCNTs-papain bioconjugates, the silica-coated bioconjugates exhibited significantly improved thermal, pH and recycling stability. Comparisons of the kinetic parameters between MWCNTs-papain bioconjugates and the silica-coated bioconjugates revealed that the K_m value of the immobilized papain experienced a slight increase after silica coating, which suggested that the silica coating did not significantly hinder papain's access to substrate or release of product.     

Glucose biosensor based on multi-wall carbon nanotubes and screen printed carbon electrodes

This paper describes a disposable electrochemical biosensor for glucose monitoring. The sensor was based on multi-wall carbon nanotubes (MWCNTs) immobilized with glucose oxidase and upon screen printed carbon electrode. The effect of MWCNTs on the response of amperometric glucose oxidase electrode for glucose was examined. Results obtained, of interest for basic and applied biochemistry, represent a first step in construction of a MWCNT-enzyme electrode biosensor with potentialities for a successful application in the biosensor area.     

碳纳米管固定化纤维素酶的最佳工艺研究

纤维素酶在环保、医药、食品等领域都具有广泛的应用前景,但由于纤维素酶的生产成本较高,生物活性较低,使得纤维素酶的应用受到了限制。为了寻找一种固定化纤维素酶的方法,使酶可以重复多次使用,首次以多壁碳纳米管为载体固定化纤维素酶,研究功能化的多壁碳纳米管固定化纤维素酶的固定化条件,采用正交试验对酶固定化中的主要条件进行优化,并通过傅里叶变换红外光谱仪对多壁碳纳米管（multiwalled carbon nanotube,MWCNTs）、纤维素酶及固定化纤维素酶的结构进行表征。结果表明,固定化纤维素酶的最佳工艺条件为：酶浓度5 mg·mL-1,温度40 ℃,pH 5.0,固定化时间3 h;通过傅里叶变换红外光谱证实纤维素酶成功固定到多壁碳纳米管上。     

Spectroscopic Investigations on the Interaction between Carbon Nanotubes and Catalase on Molecular Level

The interactions between well‐dispersed multiwalled carbon nanotubes (MWCNTs) and catalase (CAT) were investigated. The activity of CAT was inhibited with the addition of MWCNTs. After deducting the inner filter effect, the fluorescence spectra revealed that the tryptophan (Trp) residues were exposed and the fluorescence intensities of CAT increased with the increase in the MWCNTs concentration. At the same time, the environment of the Trp residues became more hydrophobic. The results of UV–vis absorption spectroscopy and CD spectra indicated that the secondary structure of CAT had been changed, and the amino acid residues were located in a more hydrophobic environment. Meanwhile, the UV–vis spectra indicated that the conformation of the heme porphyrin rings was changed. The microenvironment of CAT activity sites may be interfered by MWCNTs. This research showed that MWCNTs could not only contribute to the conformational changes of protein but also change the enzyme function.     

Preparation of gold nanoparticles/functionalized multiwalled carbon nanotube nanocomposites and its glucose biosensing application

Gold nanoparticles stabilized by amino-terminated ionic liquid (Au-IL) have been in situ noncovalently deposited on poly(sodium 4-styrene-sulfonate) (PSS)-functionalized multiwalled carbon nanotubes (MWCNTs) to form a MWCNTs/PSS/Au-IL nanocomposite. PSS can interact with MWCNTs through hydrophobic interaction. Amino-terminated ionic liquid was applied to reduce aqueous HAuCl(4), and the resulting gold nanoparticles were attached to the PSS-functionalized MWCNTs simultaneously. Most gold nanoparticles dispersed well on the functionalized MWCNTs. Transmission electron microscopy, Raman and X-ray photoelectron spectroscopy were used to confirm the composition and structure of the nanocomposites. The resulting MWCNTs/PSS/Au-IL composite exhibits good electrocatalysis toward oxygen and hydrogen peroxide reduction. And good biocompatibility with glucose oxidase was also demonstrated due to its good biocatalysis toward glucose substrate, which offered a friendly environment for the immobilization of biomolecules. Such bionanocomposite provides us potential applications in fabrication of biosensors. The resulting biosensor exhibits good response to glucose with a low detection limit 25 microM. It also has excellent reproducibility, satisfied operational stability and good storage stability.     

Electrically conductive bacterial cellulose by incorporation of carbon nanotubes

Electrically conducting polymeric membranes were prepared by incorporating multiwalled carbon nanotubes (MWCNTs) into bacterial cellulose pellicles produced by Gluconacetobacter xylinum. The MWCNTs were dispersed in a surfactant (cationic cetyl trimethylammonium bromide) solution, and cellulose pellicles were dipped into the solution for 6, 12, and 24 h. The surfactants were then extracted in pure water and dried. Electron microscopy showed that the individual MWCNTs were strongly adhered to the surface and the inside of the cellulose pellicle. The conductivity of the MWCNTs-incorporated cellulose pellicle, as measured by a four-probe at room temperature, was 1.4 x 10(-1) S/cm, based on the total cross-sectional area (approximately 9.6 wt % of MWCNTs). This suggests that the MWCNTs were incorporated uniformly and densely into the pellicles.     

Supramolecular conjugates of carbon nanotubes and DNA by a solid-state reaction

DNA-wrapped nanotubes of both multiwalled and single-walled carbon nanotubes were obtained by a solid-state mechanochemical reaction. Scanning electron microscopic images show that the nanotubes were cut into shorter lengths and were fully covered with DNA, which was further confirmed by fluorescence microscopy. This resulted in a high aqueous solubility of the products with a stability of >6 months. The results show that nanotubes were cut also with uniform distribution where >90% of the multiwalled products were 500 nm to 3 microm and 80% of the single-walled products were 250 nm to 1 microm in length, respectively. UV-vis spectra and gel electrophorosis show that the DNA in the product is intact. This facile technique for obtaining supramolecularly masked, water-soluble carbon nanotubes by a solid-state reaction has a great potential for both biological and nonbiological applications of nanotubes.     

Cell manipulation and tissue engineering at the nanoscale

This paper surveys different methods developed for nanoscale spatial manipulation of biological objects and for engineering nanoscale spatial cues to steer cellular biosystems. For the cell manipulation a new electroporation method based on multiwalled carbon nanotubes (MWCNTs) was developed in our group. By applying short microwave (mw) pulses, it was possible to induce dipoles at the MWCNT tips, which in turn can interact with charges at the cell surface. This significantly reduces the cell mortality, compared to conventional electroporation, which is related to the elimination of high electric fields and side reactions. This “nanoelectroporation” approach assisted by MWCNTs allows for rapid transport of metal nanoparticles into bacteria and yeast cells, as well as the incorporation of exogenous DNA into the cell’s genome, without affecting the cell viability and/or morphology. Another field within the scope of bio-nanotechnology is tissue engineering. This form of engineering includes the creation of scaffolds with adjustable pore size distribution and interconnectivity, and the production of micro/nanotopography on the various substrates. Here we present free-standing scaffolds made up of interconnected MWCNTs, which were prepared by chemically induced capillary and tensile forces exerted on the MWCNTs. Their potential application in this field was confirmed by extensive growth, spreading, and adhesion of a common mouse fibroblast cell line.     

Aqueous suspension of carbon nanotubes enhances the specificity of long PCR

DNA manipulation technology is facing more challenges in the postgenomics era. More and more nanomaterials have been investigated for their potential implications in developing better gene technology. In this study, we reported the beneficial effect of single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) in enhancing the specificity and total efficiency of long (14 kb) PCR. Hydroxylic and carboxylic carbon nanotubes (CNTs) had similar enhancing effects. Nanotubes could become another component for improvements in the amplification of long DNA.     

A novel multi-walled carbon nanotube-based antibody conjugate for quantitative and semi-quantitative lateral flow assays

In this study, the multi-walled carbon nanotubes (MWCNTs) were applied in lateral flow strips (LFS) for semi-quantitative and quantitative assays. Firstly, the solubility of MWCNTs was improved using various surfactants to enhance their biocompatibility for practical application. The dispersed MWCNTs were conjugated with the methamphetamine (MET) antibody in a non-covalent manner and then manufactured into the LFS for the quantitative detection of MET. The MWCNTs-based lateral flow assay (MWCNTs-LFA) exhibited an excellent linear relationship between the values of test line and MET when its concentration ranges from 62.5 to 1500 ng/mL. The sensitivity of the LFS was evaluated by conjugating MWCNTs with HCG antibody and the MWCNTs conjugated method is 10 times more sensitive than the one conjugated with classical colloidal gold nanoparticles. Taken together, our data demonstrate that MWCNTs-LFA is a more sensitive and reliable assay for semi-quantitative and quantitative detection which can be used in forensic analysis.     

Short-Term Response of Soil Enzyme Activity and Soil Respiration to Repeated Carbon Nanotubes Exposure

Nanomaterials such as single-walled carbon nanotubes (SWCNTs) and multi-walled carbon nanotubes (MWCNTs) may repeatedly enter the soil environment with unknown adverse consequences. To provide the information on the effects of repeated exposure of CNTs, we determined the response of soil enzyme activity and soil basal respiration (SBR) through a two-week incubation of farmland soil repeatedly treated with different concentrations of CNTs (100, 200, 500 mg kg^?1 for SWCNTs and 100, 500, 1000 mg Kg^?1 for MWCNTs). The activities of catalase, alkaline phosphatase, and invertase and SBR were measured after one- and two-time treatments. The repeated contamination of SWCNTs and MWCNTs repressed the activity of alkaline phosphatase and invertase in the 14-day incubation. Alkaline phosphatase and invertase were more sensitive indicators of CNTs’ contamination than catalase and soil basal respiration. High concentration of the SWCNTs stimulated SBR while the lower concentration suppressed SBR. The recurred exposure of SWCNTs and MWCNTs repressed the activity of catalase and invertase. The obtained results indicated that the soil microorganisms were suppressed under repeated pollution, as suggested by the same suppressed response of SBR between SWCNTs and MWCNTs treatment, except for the concentration of 500 mg kg^?1.     

Covalent immobilization of redox enzyme on electrospun nonwoven poly(acrylonitrile-co-acrylic acid) nanofiber mesh filled with carbon nanotubes: a comprehensive study

In this work, novel conductive composite nanofiber mesh possessing reactive groups was electrospun from solutions containing poly(acrylonitrile-co-acrylic acid) (PANCAA) and multi-walled carbon nanotubes (MWCNTs) for redoxase immobilization, assuming that the incorporated MWCNTs could behave as electrons transferor during enzyme catalysis. The covalent immobilization of catalase from bovine liver on the neat PANCAA nanofiber mesh or the composite one was processed in the presence of EDC/NHS. Results indicated that both the amount and activity retention of bound catalase on the composite nanofiber mesh were higher than those on the neat PANCAA nanofiber mesh, and the activity increased up to 42%. Kinetic parameters, K(m) and V(max), for the catalases immobilized on the composite nanofiber mesh were lower and higher than those on the neat one, respectively. This enhanced activity might be ascribed to either promoted electron transfer through charge-transfer complexes and the pi system of carbon nanotubes or rendered biocompatibility by modified MWCNTs. Furthermore, the immobilized catalases revealed much more stability after MWCNTs were incorporated into the polymer nanofiber mesh. However, there was no significant difference in optimum pH value and temperature, thermal stability and operational stability between these two immobilized preparations, while the two ones appeared more advantageous than the free in these properties. The effect of MWCNTs incorporation on another redox enzyme, peroxidase, was also studied and it was found that the activity increased by 68% in comparison of composite one with neat preparation.     

Carbon nanotube/polysulfone screen-printed electrochemical immunosensor

The simple and efficient method for preparing sensitive carbon nanotube/polysulfone/RIgG immunocomposite is described. The membrane of the modified disposable screen-printed electrochemical immunosensor is based on phase inversion method. Carbon nanotube/polysulfone membrane acts both as reservoir of immunological material and transducer while offering high surface area, high toughness and mechanical flexibility. The comparison with graphite/polysulfone/RIgG immunosensors shows a much higher sensitivity for those prepared with carbon nanotubes coupled with polysulfone (PSf). The membrane was characterized by scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDX), laser profilometer and by atomic force microscopy (AFM). The purity of the materials was evaluated by thermogravimetric analysis (TGA). The roughness value is doubled when MWCNTs are used instead of graphite into the PSf membranes and the incorporation of antibodies enhances the dispersion of the carbon with the polymeric membrane reducing the roughness in all cases. This biosensor was based on the competitive assay between free and labelled anti-RIgG for the available binding sites of immobilized rabbit IgG (RIgG). The RIgG was incorporated into the polysulfone membrane by a phase inversion method. Horse radish peroxidase (HRP) enzyme was used as label and hydroquinone as mediator. The detection limit for competitive assay was determined to be 1.66 microg/ml. the linear range of anti-RIgG from 2 to 5 microg/ml and the C(50) was found at 3.56 microg/ml. The sensitivity is five times higher for MWCNT than for graphite electrodes, showing lower unspecific adsorption.     

Biosafety of non-surface modified carbon nanocapsules as a potential alternative to carbon nanotubes for drug delivery purposes

Background

Carbon nanotubes (CNTs) have found wide success in circuitry, photovoltaics, and other applications. In contrast, several hurdles exist in using CNTs towards applications in drug delivery. Raw, non-modified CNTs are widely known for their toxicity. As such, many have attempted to reduce CNT toxicity for intravenous drug delivery purposes by post-process surface modification. Alternatively, a novel sphere-like carbon nanocapsule (CNC) developed by the arc-discharge method holds similar electric and thermal conductivities, as well as high strength. This study investigated the systemic toxicity and biocompatibility of different non-surface modified carbon nanomaterials in mice, including multi-walled carbon nanotubes (MWCNTs), single-walled carbon nanotubes (SWCNTs), carbon nanocapsules (CNCs), and C₆₀ fullerene (C₆₀). The retention of the nanomaterials and systemic effects after intravenous injections were studied.

Methodology and Principal Findings

MWCNTs, SWCNTs, CNCs, and C₆₀ were injected intravenously into FVB mice and then sacrificed for tissue section examination. Inflammatory cytokine levels were evaluated with ELISA. Mice receiving injection of MWCNTs or SWCNTs at 50 µg/g b.w. died while C₆₀ injected group survived at a 50% rate. Surprisingly, mortality rate of mice injected with CNCs was only at 10%. Tissue sections revealed that most carbon nanomaterials retained in the lung. Furthermore, serum and lung-tissue cytokine levels did not reveal any inflammatory response compared to those in mice receiving normal saline injection.

Conclusion

Carbon nanocapsules are more biocompatible than other carbon nanomaterials and are more suitable for intravenous drug delivery. These results indicate potential biomedical use of non-surface modified carbon allotrope. Additionally, functionalization of the carbon nanocapsules could further enhance dispersion and biocompatibility for intravenous injection.     

Carbon nanotube reinforced Bombyx mori silk nanofibers by the electrospinning process

Nanocomposite fibers of Bombyx mori silk and single wall carbon nanotubes (SWNT) were produced by the electrospinning process. Regenerated silk fibroin dissolved in a dispersion of carbon nanotubes in formic acid was electrospun into nanofibers. The morphology, structure, and mechanical properties of the electrospun nanofibers were examined by field emission environmental scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and microtensile testing. TEM of the reinforced fibers shows that the single wall carbon nanotubes are embedded in the fibers. The mechanical properties of the SWNT reinforced fiber show an increase in Young's modulus up to 460% in comparison with the un-reinforced aligned fiber, but at the expense of the strength and strain to failure.