Crystal Structure of the Minor Pilin CofB,the Initiator of CFA/III Pilus Assembly in Enterotoxigenic Escherichia coli

Type IV pili are extracellular polymers of the major pilin subunit. These subunits are held together in the pilus filament by hydrophobic interactions among their N-terminal α-helices, which also anchor the pilin subunits in the inner membrane prior to pilus assembly. Type IV pilus assembly involves a conserved group of proteins that span the envelope of Gram-negative bacteria. Among these is a set of minor pilins, so named because they share their hydrophobic N-terminal polymerization/membrane anchor segment with the major pilins but are much less abundant. Minor pilins influence pilus assembly and retraction, but their precise functions are not well defined. The Type IV pilus systems of enterotoxigenic Escherichia coli and Vibrio cholerae are among the simplest of Type IV pilus systems and possess only a single minor pilin. Here we show that the enterotoxigenic E. coli minor pilins CofB and LngB are required for assembly of their respective Type IV pili, CFA/III and Longus. Low levels of the minor pilins are optimal for pilus assembly, and CofB can be detected in the pilus fraction. We solved the 2.0 Å crystal structure of N-terminally truncated CofB, revealing a pilin-like protein with an extended C-terminal region composed of two discrete domains connected by flexible linkers. The C-terminal region is required for CofB to initiate pilus assembly. We propose a model for CofB-initiated pilus assembly with implications for understanding filament growth in more complex Type IV pilus systems as well as the related Type II secretion system.     

Structure and assembly of the pseudopilin PulG

The pseudopilin PulG is one of several essential components of the type II pullulanase secretion machinery (the Pul secreton) of the Gram-negative bacterium Klebsiella oxytoca. The sequence of the N-terminal 25 amino acids of the PulG precursor is hydrophobic and very similar to the corresponding region of type IV pilins. The structure of a truncated PulG (lacking the homologous region), as determined by X-ray crystallography, was found to include part of the long N-terminal alpha-helix and the four internal anti-parallel beta-strands that characterize type IV pilins, but PulG lacks the highly variable loop region with a disulphide bond that is found in the latter. When overproduced, PulG forms flexible pili whose structural features, as visualized by electron microscopy, are similar to those of bacterial type IV pili. The average helical repeat comprises 17 PulG subunits and four helical turns. Electron microscopy and molecular modelling show that PulG probably assembles into left-handed helical pili with the long N-terminal alpha-helix tightly packed in the centre of the pilus. As in the type IV pilins, the hydrophobic N-terminal part of the PulG alpha-helix is necessary for its assembly. Subtle sequence variations within this highly conserved segment seem to determine whether or not a type IV pilin can be assembled into pili by the Pul secreton.     

Structure of a pilin monomer from Pseudomonas aeruginosa: implications for the assembly of pili

Type IV pilin monomers assemble to form fibers called pili that are required for a variety of bacterial functions. Pilin monomers oligomerize due to the interaction of part of their hydrophobic N-terminal alpha-helix. Engineering of a truncated pilin from Pseudomonas aeruginosa strain K122-4, where the first 28 residues are removed from the N terminus, yields a soluble, monomeric protein. This truncated pilin is shown to bind to its receptor and to decrease morbidity and mortality in mice upon administration 15 min before challenge with a heterologous strain of Pseudomonas. The structure of this truncated pilin reveals an alpha-helix at the N terminus that lies across a 4-stranded antiparallel beta-sheet. A model for a pilus is proposed that takes into account both electrostatic and hydrophobic interactions of pilin subunits as well as previously published x-ray fiber diffraction data. Our model indicates that DNA or RNA cannot pass through the center of the pilus, however, the possibility exists for small organic molecules to pass through indicating a potential mechanism for signal transduction.     

Assembly of pili on the surface of Corynebacterium diphtheriae

Pili of Gram-negative pathogens are formed from pilin precursor molecules by non-covalent association within the outer membrane envelope. Gram-positive microbes employ the cell wall peptidoglycan as a surface organelle for the covalent attachment of proteins, however, an assembly pathway for pili has not yet been revealed. We show here that pili of Corynebacterium diphtheriae are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals and SpaC seems positioned at the pilus tip. Assembled pili are released from the bacterial surface by treatment with murein hydrolase, suggesting that the pilus fibres may be anchored to the cell wall envelope. All three pilin subunit proteins are synthesized as precursors carrying N-terminal signal peptides and C-terminal sorting signals. Some, but not all, of the six sortase genes encoded in the genome of C. diphtheriae are required for precursor processing, pilus assembly or cell wall envelope attachment. Pilus assembly is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side chain amino groups of pilin motif sequences to generate links between pilin subunits. This covalent tethering of adjacent pilin subunits appears to have evolved in many Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs.     

Type IV pilin structure and assembly: X-ray and EM analyses of Vibrio cholerae toxin-coregulated pilus and Pseudomonas aeruginosa PAK pilin

Pilin assembly into type IV pili is required for virulence by bacterial pathogens that cause diseases such as cholera, pneumonia, gonorrhea, and meningitis. Crystal structures of soluble, N-terminally truncated pilin from Vibrio cholera toxin-coregulated pilus (TCP) and full-length PAK pilin from Pseudomonas aeruginosa reveal a novel TCP fold, yet a shared architecture for the type IV pilins. In each pilin subunit a conserved, extended, N-terminal alpha helix wrapped by beta strands anchors the structurally variable globular head. Inside the assembled pilus, characterized by cryo-electron microscopy and crystallography, the extended hydrophobic alpha helices make multisubunit contacts to provide mechanical strength and flexibility. Outside, distinct interactions of adaptable heads contribute surface variation for specificity of pilus function in antigenicity, motility, adhesion, and colony formation.     

Type IV pili are involved in plant–microbe and fungus–microbe interactions

Adherence of bacteria to eukaryotic cells is essential for the initiation of infection in many animal and human pathogens, e.g. Neisseria gonorrhoeae and Pseudomonas aeruginosa . Adhesion-mediating type IV pili, filamentous surface appendages formed by pilin subunits, are crucial virulence factors. Here, we report that type IV pilus-dependent adhesion is also involved in plant–bacteria and fungus–bacteria interactions. Nitrogen-fixing, endophytic bacteria, Azoarcus sp., can infect the roots of rice and spread systemically into the shoot without causing symptoms of plant disease. Formation of pili on solid media was dependent on the pilAB locus. PilA encodes an unusually short (6.4 kDa) putative pilin precursor showing 100% homology to the conserved N-terminus of the Pseudomonas aeruginosa type IV pilin. PilB encodes for a 14.2 kDa polypeptide showing similarity to FimF, a component of type I fimbriae of Escherichia coli . It was found to be extruded beyond the cell surface by immunofluorescence studies, and it may, therefore, be part of a pilus assembly complex or the pilus itself. Both genes are involved in the establishment of bacteria on the root surface of rice seedlings, as detected by fluorescence microscopy. Moreover, both genes are necessary for bacterial adhesion to the mycelium of an ascomycete, which was isolated from the same rhizosphere as the bacteria. In co-culture with the fungus, Azoarcus sp. forms complex intracytoplasmic membranes, diazosomes, which are related to efficient nitrogen fixation. Adhesion to the mycelium appears to be crucial for this process, as diazosomes were absent and nitrogen fixation rates were decreased in pilAB mutants in co-culture.     

Chaperone-independent folding of type 1 pilus domains

An elementary step in the assembly of adhesive type 1 pili of Escherichia coli is the folding of structural pilus subunits in the periplasm. The previously determined X-ray structure of the complex between the type 1 pilus adhesin FimH and the periplasmic pilus assembly chaperone FimC has shown that FimH consists of a N-terminal lectin domain and a C-terminal pilin domain, and that FimC exclusively interacts with the pilin domain. The pilin domain fold, which is common to all pilus subunits, is characterized by an incomplete beta-sheet that is completed by a donor strand from FimC in the FimC-FimH complex. This, together with unsuccessful attempts to refold isolated, urea-denatured FimH in vitro had suggested that folding of pilin domains strictly depends on sequence information provided by FimC. We have now analyzed in detail the folding of FimH and its two isolated domains in vitro. We find that not only the lectin domain, but also the pilin domain can fold autonomously and independently of FimC. However, the thermodynamic stability of the pilin domain is very low (8-10kJmol(-1)) so that a significant fraction of the domain is unfolded even in the absence of denaturant. This explains the high tendency of structural pilus subunits to aggregate non-specifically in the absence of stoichiometric amounts of FimC. Thus, pilus chaperones prevent non-specific aggregation of pilus subunits by native state stabilization after subunit folding.     

Type III secretion system-associated pilus of Pseudomonas syringae as an epitope display tool

Type III secretion system-associated pili found in several plant pathogenic bacteria are required for injection of virulence proteins from bacteria into the plant cells. The possibility to use the type III secretion pilus of Pseudomonas syringae as an epitope display tool was studied. The advantage of the type III secretion pilus, compared with conventional fimbrial epitope display tools, is that the pilin subunits of the type III secretion pilus can auto-assemble into intact pili in vitro. Various peptides were inserted into the type III secretion pilin subunit, and secretion, assembly and surface properties of the modified pili were monitored. It was concluded that the outwards-projecting N-terminal region of the pilin can bear even 43 amino acids insertion. The three-dimensional structure of the epitope, however, can restrict the use of the pilus as an epitope display tool: a beta-hairpin structure was poorly tolerated.     

An Aeromonas salmonicida type IV pilin is required for virulence in rainbow trout Oncorhynchus mykiss

Aeromonas salmonicida expresses a large number of proven and suspected virulence factors including bacterial surface proteins, extracellular degradative enzymes, and toxins. We report the isolation and characterization of a 4-gene cluster, tapABCD, from virulent A. salmonicida A450 that encodes proteins homologous to components required for type IV pilus biogenesis. One gene, tapA, encodes a protein with high homology to type IV pilus subunit proteins from many gram-negative bacterial pathogens, including Aeromonas hydrophila, Pseudomonas aeruginosa, and Vibrio vulnificus. A survey of A. salmonicida isolates from a variety of sources shows that the tapA gene is as ubiquitous in this species as it is in other members of the Aeromonads. Immunoblotting experiments demonstrate that it is expressed in vitro and is antigenically conserved among the A. salmonicida strains tested. A mutant A. salmonicida strain defective in expression of TapA was constructed by allelic exchange and found to be slightly less pathogenic for juvenile Oncorhynchus mykiss (rainbow trout) than wild type when delivered by intraperitoneal injection. In addition, fish initially challenged with a high dose of wild type were slightly more resistant to rechallenge with wild type than those initially challenged with the tapA mutant strain, suggesting that presence of TapA contributes to immunity. Two of the other three genes identified, tapB and tapC, encode proteins with homology to factors known to be required for type IV pilus assembly in P. aeruginosa, but in an as yet unidentified manner. TapB is a member of the ABC-transporter family of proteins that contain characteristic nucleotide-binding regions, and which may provide energy for type IV pilus assembly through the hydrolysis of ATP. TapC homologs are integral cytoplasmic membrane proteins that may play a role in pilus anchoring or initiation of assembly. The fourth gene, tapD, encodes a product that shares homology with a family of proteins with a known biochemical function, namely, the type IV prepilin leader peptidases. These bifunctional enzymes proteolytically cleave the leader peptide from the pilin precursor (prepilin) and then N-methylate the newly exposed N-terminal amino acid prior to assembly of the subunits into the pilus structure. We demonstrate that A. salmonicida TapD is able to restore type IV pilus assembly and type II secretion in a P. aeruginosa strain carrying a mutation in its type IV peptidase gene, suggesting that it plays the same role in A. salmonicida.     

Mutational analysis of the Pseudomonas syringae pv. tomato hrpA gene encoding Hrp pilus subunit

Plant pathogenic Pseudomonas syringae strains harbour a type III secretion pathway suggested to be involved in the delivery of effector proteins from the bacteria into plant cells. During plant interaction, the bacteria apparently produce surface appendages, termed Hrp pili, that are indispensable for the secretion process. We have created an insertion mutation library, as well as deletion mutations to hrpA, the structural gene encoding Hrp pilin. Analysis of the mutants revealed gene regions important for hrpA expression, pilus assembly and pilus-dependent autoagglutination of the bacteria. The majority of insertions in the amino-terminal half of the pilin were tolerated without bacterial interaction with plants being affected, while the carboxy-terminus appeared to be needed for pilus assembly. Insertions in the 5' non-translated region and the first codons within the open reading frame affected mRNA production or stability and abolished protein production.     

Structural and Functional Studies of the Pseudomonas aeruginosa Minor Pilin,PilE

Many bacterial pathogens, including Pseudomonas aeruginosa, use type IVa pili (T4aP) for attachment and twitching motility. T4aP are composed primarily of major pilin subunits, which are repeatedly assembled and disassembled to mediate function. A group of pilin-like proteins, the minor pilins FimU and PilVWXE, prime pilus assembly and are incorporated into the pilus. We showed previously that minor pilin PilE depends on the putative priming subcomplex PilVWX and the non-pilin protein PilY1 for incorporation into pili, and that with FimU, PilE may couple the priming subcomplex to the major pilin PilA, allowing for efficient pilus assembly. Here we provide further support for this model, showing interaction of PilE with other minor pilins and the major pilin. A 1.25 Å crystal structure of PilE_Δ1–28 shows a typical type IV pilin fold, demonstrating how it may be incorporated into the pilus. Despite limited sequence identity, PilE is structurally similar to Neisseria meningitidis minor pilins PilX_Nm and PilV_Nm, recently suggested via characterization of mCherry fusions to modulate pilus assembly from within the periplasm. A P. aeruginosa PilE-mCherry fusion failed to complement twitching motility or piliation of a pilE mutant. However, in a retraction-deficient strain where surface piliation depends solely on PilE, the fusion construct restored some surface piliation. PilE-mCherry was present in sheared surface fractions, suggesting that it was incorporated into pili. Together, these data provide evidence that PilE, the sole P. aeruginosa equivalent of PilX_Nm and PilV_Nm, likely connects a priming subcomplex to the major pilin, promoting efficient assembly of T4aP.     

Substitutions in the N-terminal alpha helical spine of Neisseria gonorrhoeae pilin affect Type IV pilus assembly, dynamics and associated functions

Type IV pili (Tfp) are multifunctional surface appendages expressed by many Gram negative species of medical, environmental and industrial importance. The N-terminally localized, so called alpha-helical spine is the most conserved structural feature of pilin subunits in these organelles. Prevailing models of pilus assembly and structure invariably implicate its importance to membrane trafficking, organelle structure and related functions. Nonetheless, relatively few studies have examined the effects of missense substitutions within this domain. Using Neisseria gonorrhoeae as a model system, we constructed mutants with single and multiple amino acid substitutions localized to this region of the pilin subunit PilE and characterized them with regard to pilin stability, organelle expression and associated phenotypes. The consequences of simultaneous expression of the mutant and wild-type PilE forms were also examined. The findings document for the first time in a defined genetic background the phenomenon of pilin intermolecular complementation in which assembly defective pilin can be rescued into purifiable Tfp by coexpression of wild-type PilE. The results further demonstrate that pilin subunit composition can impact on organelle dynamics mediated by the PilT retraction protein via a process that appears to monitor the efficacy of subunit-subunit interactions. In addition to confirming and extending the evidence for PilE multimerization as an essential component for competence for natural genetic transformation, this work paves the way for detailed studies of Tfp subunit-subunit interactions including self-recognition within the membrane and packing within the pilus polymer.     

Interaction with type IV pili induces structural changes in the bacterial outer membrane secretin PilQ

Type IV pili are cell surface organelles found on many Gram-negative bacteria. They mediate a variety of functions, including adhesion, twitching motility, and competence for DNA uptake. The type IV pilus is a helical polymer of pilin protein subunits and is capable of rapid polymerization or depolymerization, generating large motor forces in the process. Here we show that a specific interaction between the outer membrane secretin PilQ and the type IV pilus fiber can be detected by far-Western analysis and sucrose density gradient centrifugation. Transmission electron microscopy of preparations of purified pili, to which the purified PilQ oligomer had been added, showed that PilQ was uniquely located at one end of the pilus fiber, effectively forming a "mallet-type" structure. Determination of the three-dimensional structure of the PilQ-type IV pilus complex at 26-angstroms resolution showed that the cavity within the protein complex was filled. Comparison with a previously determined structure of PilQ at 12-angstroms resolution indicated that binding of the pilus fiber induced a dissociation of the "cap" feature and lateral movement of the "arms" of the PilQ oligomer. The results demonstrate that the PilQ structure exhibits a dynamic response to the binding of its transported substrate and suggest that the secretin could play an active role in type IV pilus assembly as well as secretion.     

Pili in gram-positive pathogens

Most bacterial pathogens have long filamentous structures known as pili or fimbriae extending from their surface. These structures are often involved in the initial adhesion of the bacteria to host tissues during colonization. In gram-negative bacteria, pili are typically formed by non-covalent interactions between pilin subunits. By contrast, the recently discovered pili in gram-positive pathogens are formed by covalent polymerization of adhesive pilin subunits. Evidence from studies of pili in the three principal streptococcal pathogens of humans indicates that the genes that encode the pilin subunits and the enzymes that are required for the assembly of these subunits into pili have been acquired en bloc by the horizontal transfer of a pathogenicity island.     

Insights into type IV pilus biogenesis and dynamics from genetic analysis of a C-terminally tagged pilin: a role for O-linked glycosylation

Type IV pili are surface organelles essential for pathogenicity of many Gram-negative bacteria. In Neisseria gonorrhoeae, the major subunit of type IV pili, PilE, is a target of its general O-linked glycosylation system. This system modifies a diverse set of periplasmic and extracellular gonococcal proteins with a variable set of glycans. Here we show that expression of a particular hexa-histidine-tagged PilE was associated with growth arrest. By studying intra- and extragenic suppressors, we found that this phenotype was dependent on pilus assembly and retraction. Based on these results, we developed a sensitive tool to identify factors with subtle effects on pilus dynamics. Using this approach, we found that glycan chain length has differential effects on the growth arrest that appears to be mediated at the level of pilin subunit-subunit interactions and bidirectional remodelling of pilin between its membrane-associated and assembled states. Gonococcal pilin glycosylation thus plays both an intracellular role in pilus dynamics and potential extracellular roles mediated through type IV pili. In addition to demonstrating the effect of glycosylation on pilus dynamics, the study provides a new way of identifying factors with less dramatic effects on processes involved in type IV pilus biogenesis.     

Localizing the subunit pool for the temporally regulated polar pili of Caulobacter crescentus

The pili of the stalked bacterium Caulobacter crescentus are assembled at a specific time in the life cycle at one pole of the cell and are composed of the monomer protein, pilin. A previous study demonstrated that the onset of pilin synthesis occurs well before pili appear on the surface, suggesting that pilin accumulates within the cell. In the present study, an electron microscope immunocytochemistry assay was used to determine the subcellular location of this unassembled pilin and its fate during pilus assembly and cell division. Populations of synchronously growing cells were embedded in epoxy resin at selected times during the cell cycle. Ultrathin sections were treated with pilin-specific antibody, followed by protein A coupled to colloidal gold. It was determined that the cellular location for unassembled pilin was the cell cytoplasm. All cell membranes and regions of nuclear material were poorly labeled. Quantitation demonstrated that label density increased during the period of pilin synthesis and declined during the period of pilus assembly and maintenance. The pilin pool was not unequally segregated at division; e.g., to the daughter cell that is elaborating pili. Mutants which have simultaneously lost the ability to produce flagella, pili, and other polar organelles, possibly due to alterations in the specialized region of polar organelle assembly, were also examined by the immunocytochemistry technique. There was no significant difference in the pilin pool size relative to the wild type, indicating that pilin synthesis continues in the absence of a functioning assembly site. This pattern of synthesis and assembly for the pilus is significantly different from that of the polar flagellum which is produced at the same time and location on the cell surface. These findings are discussed in relation to the hypothesized organization center at the cell pole which may have a major role in directing the assembly of all the polar structures.     

The Structure of the PapD-PapGII Pilin Complex Reveals an Open and Flexible P5 Pocket

P pili are hairlike polymeric structures that mediate binding of uropathogenic Escherichia coli to the surface of the kidney via the PapG adhesin at their tips. PapG is composed of two domains: a lectin domain at the tip of the pilus followed by a pilin domain that comprises the initial polymerizing subunit of the 1,000-plus-subunit heteropolymeric pilus fiber. Prior to assembly, periplasmic pilin domains bind to a chaperone, PapD. PapD mediates donor strand complementation, in which a beta strand of PapD temporarily completes the pilin domain''s fold, preventing premature, nonproductive interactions with other pilin subunits and facilitating subunit folding. Chaperone-subunit complexes are delivered to the outer membrane usher where donor strand exchange (DSE) replaces PapD''s donated beta strand with an amino-terminal extension on the next incoming pilin subunit. This occurs via a zip-in–zip-out mechanism that initiates at a relatively accessible hydrophobic space termed the P5 pocket on the terminally incorporated pilus subunit. Here, we solve the structure of PapD in complex with the pilin domain of isoform II of PapG (PapGIIp). Our data revealed that PapGIIp adopts an immunoglobulin fold with a missing seventh strand, complemented in parallel by the G1 PapD strand, typical of pilin subunits. Comparisons with other chaperone-pilin complexes indicated that the interactive surfaces are highly conserved. Interestingly, the PapGIIp P5 pocket was in an open conformation, which, as molecular dynamics simulations revealed, switches between an open and a closed conformation due to the flexibility of the surrounding loops. Our study reveals the structural details of the DSE mechanism.     

Crystallographic structure reveals phosphorylated pilin from Neisseria: phosphoserine sites modify type IV pilus surface chemistry and fibre morphology

Understanding the structural biology of type IV pili, fibres responsible for the virulent attachment and motility of numerous bacterial pathogens, requires a detailed understanding of the three-dimensional structure and chemistry of the constituent pilin subunit. X-ray crystallographic refinement of Neisseria gonorrhoeae pilin against diffraction data to 2.6 A resolution, coupled with mass spectrometry of peptide fragments, reveals phosphoserine at residue 68. Phosphoserine is exposed on the surface of the modelled type IV pilus at the interface of neighbouring pilin molecules. The site-specific mutation of serine 68 to alanine showed that the loss of the phosphorylation alters the morphology of fibres examined by electron microscopy without a notable effect on adhesion, transformation, piliation or twitching motility. The structural and chemical characterization of protein phosphoserine in type IV pilin subunits is an important indication that this modification, key to numerous regulatory aspects of eukaryotic cell biology, exists in the virulence factor proteins of bacterial pathogens. These O-linked phosphate modifications, unusual in prokaryotes, thus merit study for possible roles in pilus biogenesis and modulation of pilin chemistry for optimal in vivo function.     

Structure of the Vibrio cholerae Type IVb Pilus and stability comparison with the Neisseria gonorrhoeae type IVa pilus

Type IV pili are multifunctional filaments displayed on many bacterial pathogens. Members of the Type IVa pilus subclass are found on a diverse group of human pathogens, whereas Type IVb pili are found almost exclusively on enteric bacteria. The Type IVa and IVb subclasses are distinguished by differences in the pilin subunits, including the fold of the globular domain. To understand the implications of the distinct pilin folds, we compared the stabilities of pilin subunits and pilus filaments for the Type IVa GC pilus from Neisseria gonorrhoeae and the Type IVb toxin-coregulated pilus (TCP) from Vibrio cholerae. We show that while recombinant TCP pilin is more stable than GC pilin, the GC pili are more resistant to proteolysis, heat and chemical denaturation than TCP, remaining intact in 8?M urea. To understand these differences, we determined the TCP structure by electron microscopy and three-dimensional image reconstruction. TCP have an architecture similar to that of GC pili, with subunits arranged in a right-handed 1-start helix and related by an 8.4-? axial rise and a 96.8° azimuthal rotation. However, the TCP subunits are not as tightly packed as GC pilins, and the distinct Type IVb pilin fold exposes a segment of the α-helical core of TCP. Hydrophobic interactions dominate for both pilus subtypes, but base stacking by aromatic residues conserved among the Type IVa pilins may contribute to GC pilus stability. The extraordinary stability of GC pili may represent an adaptation of the Type IVa pili to harsh environments and the need to retract against external forces.     

Type II protein secretion in Pseudomonas aeruginosa: the pseudopilus is a multifibrillar and adhesive structure

The type II secretion pathway of Pseudomonas aeruginosa is involved in the extracellular release of various toxins and hydrolytic enzymes such as exotoxin A and elastase. This pathway requires the function of a macromolecular complex called the Xcp secreton. The Xcp secreton shares many features with the machinery involved in type IV pilus assembly. More specifically, it involves the function of five pilin-like proteins, the XcpT-X pseudopilins. We show that, upon overexpression, the XcpT pseudopilin can be assembled in a pilus, which we call a type II pseudopilus. Image analysis and filtering of electron micrographs indicated that these appendages are composed of individual fibrils assembled together in a bundle structure. Our observations thus revealed that XcpT has properties similar to those of type IV pilin subunits. Interestingly, the assembly of the type II pseudopilus is not exclusively dependent on the Xcp machinery but can be supported by other similar machineries, such as the Pil (type IV pilus) and Hxc (type II secretion) systems of P. aeruginosa. In addition, heterologous pseudopilins can be assembled by P. aeruginosa into a type II pseudopilus. Finally, we showed that assembly of the type II pseudopilus confers increased bacterial adhesive capabilities. These observations confirmed the ability of pseudopilins to form a pilus structure and raise questions with respect to their function in terms of secretion and adhesion, two crucial biological processes in the course of bacterial infections.