Visualization of RNA crystal growth by atomic force microscopy.

The crystallization of transfer RNA (tRNA) was investigated using atomic force microscopy (AFM) over the temperature range from 4 to 16 degrees C, and this produced the first in situ AFM images of developing nucleic acid crystals. The growth of the (110) face of hexagonal yeast tRNAPhe crystals was observed to occur at steps on vicinal hillocks generated by multiple screw dislocation sources in the temperature range of 13.5-16 degrees C. Two-dimensional nucleation begins to dominate at 13.5 degrees C, with the appearance of three-dimensional nuclei at 12 degrees C. The changes in growth mechanisms are correlated with variations in supersaturation which is higher in the low temperature range. Growth of tRNA crystals was characterized by a strong anisotropy in the tangential step movement and transformation of growth modes on single crystals were directly observed by AFM over the narrow temperature range utilized. Finally, lattice resolution images of the molecular structure of surface layers were recorded. The implications of the strong temperature dependence of tRNAPhe crystal growth are discussed in view of improving and better controlling crystallization of nucleic acids.     

Visualization and characterization of prolamellar bodies with atomic force microscopy

Prolamellar bodies (PLBs) isolated from etiolated wheat seedlings were studied with the use of atomic force microscopy (AFM), transmission electron microscopy (TEM) and fluorescence spectroscopy. With AFM, PLBs were seen as spherical structures about 1–2 μm in diameter, more elastic than mica and poly-l-lysine substrate. TEM analyses confirmed that PLBs of wheat leaf etioplasts also had an average diameter of appr. 1 μm. Illumination induced the photoreduction of photoactive protochlorophyllide (Pchlide), i.e. Pchlide bound to protochlorophyllide oxidoreductase, which was shown in fluorescence spectra. The photoreduction was followed by the disruption of PLB structures, which started with the enlargement of PLB spheres and then their fragmentation into small balls as seen with AFM. Light-induced vesicle formation and the outgrowth of lamellar (pro)thylakoid membranes on the PLB surface were also confirmed by TEM analyses, and resulted in the apparent enlargement of the PLB diameter. The blue-shift of the fluorescence emission maximum of chlorophyllide observed for PLBs at room temperature after Pchlide photoreduction was completed within 25 min. However, structural changes in PLBs were still observed after the completion of the blue-shift. The incubation of PLBs in darkness with HgCl₂ also resulted in PLB enlargement and a loosening of their structure. AFM provides a unique opportunity to observe PLBs at a physiological temperature without the necessity of fixation.     

Visualization of single Escherichia coli FtsZ filament dynamics with atomic force microscopy

FtsZ, the prokaryotic homologue of tubulin, is an essential cell division protein. In the cell, it localizes at the center, forming a ring that constricts during division. In vitro, it binds and hydrolyzes GTP and polymerizes in a GTP-dependent manner. We have used atomic force microscopy to study the structure and dynamics of FtsZ polymer assembly on a mica surface under buffer solution. The polymers were highly dynamic and flexible, and they continuously rearranged over the surface. End-to-end joining of filaments and depolymerization from internal zones were observed, suggesting that fragmentation and reannealing may contribute significantly to the dynamics of FtsZ assembly. The shape evolution of the restructured polymers manifested a strong inherent tendency to curve. Polymers formed in the presence of non-hydrolyzable nucleotide analogues or in the presence of GDP and AlF(3) were structurally similar but showed a slower dynamic behavior. These results provide experimental evidence supporting the model of single-strand polymerization plus cyclization recently proposed to explain the hydrodynamic behavior of the polymers in solution.     

Visualization of alkali-denatured supercoiled plasmid DNA by atomic force microscopy

To study the alkali denaturation of supercoiled DNA, plasmid pBR322 was treated with gradient concentrations of NaOH solution. The results of gel electrophoresis showed that the alkali denaturation of the supercoiled DNA occurred in a narrow range of pH value (12.88-12.90). The alkali-denatured supercoiled DNA ran, as a sharp band, faster than the supercoiled DNA. The supercoiled plasmid DNA of pBR322, pACYC184 and pJGX15A were denatured by NaOH, and then visualized by atomic force microscopy. Compared with the supercoiled DNA, the atomic force microscopy images of the alkali-denatured supercoiled DNA showed rough surface with many kinks, bulges on double strands with inhomogeneous diameters. The apparent contour lengths of the denatured DNA were shortened by 16%, 16% and 50% for pBR322, pACYC184 and pJGX15A, respectively. All evidence suggested that the alkali-denatured supercoiled DNA had a stable conformation with unregistered, topologically constrained double strands and intrastrand secondary structure.     

Visualization of intrinsically disordered proteins by high-speed atomic force microscopy

High-speed atomic force microscopy (HS-AFM) is a powerful tool established 13 years ago. This methodology can capture individual protein molecules carrying out functional activities under near-physiological conditions, without chemical labeling, at 2–3 nm lateral and ∼0.1 nm vertical spatial resolution, and at sub-100 ms temporal resolution. Although most biological HS-AFM studies thus far target structured proteins, HS-AFM is also ideally suited to study the dynamics of intrinsically disordered proteins. Here we review some of the dynamic structures and processes of intrinsically disordered proteins that have been unveiled by HS-AFM imaging.     

Visualization of plant cell walls by atomic force microscopy.

Atomic force microscopy has been used to visualize the ultrastructure of hydrated plant cell wall material from prepared apple (Malus pumila MILL; Cox orange pippin), water chestnut (Eleocharis dulcis L.), potato (Solanum tuberosum L.; Bintje), and carrot (Daucus carota L.; Amsterdamse bak) parenchyma. Samples of cell wall material in aqueous suspension were deposited onto freshly cleaved mica. Excess water was blotted away and the moist samples were imaged in air at ambient temperature and humidity. The three-dimensional images obtained highlighted the layered structure of the plant cell walls and revealed features interpreted as individual cellulose microfibrils and plasmodesmata.     

Coccolith biomineralisation studied with atomic force microscopy

Biomineralisation can only be understood as an interplay between organic and mineral phases. With this objective, we conducted an investigation of coccoliths using atomic force microscopy (AFM), an ultra-high resolution technique that requires no surface coating and can be used in air or under solution at ambient conditions of temperature and pressure. The detailed morphology, crystal structure, organic scales and organic coating of the coccolith species Coccolithus pelagicus , Helicosphaera carteri and Oolithotus fragilis were investigated. The fine structure of coccoliths is very complex, with the calcite either being smooth, dominated by steps or tuberculate; organic cover can be either granular or fibrous. Behaviour of coccolith surfaces during dissolution is influenced both by mineral and organic material and different surface types show variable resistance to dissolution. The organic coating protects element faces against etching. Through atomic resolution AFM, it is possible to establish the crystallographic structure of the distal shields of C. pelagicus and O. fragilis . Though elements of both species are dominated by stable crystal faces, there are important differences between them, with the external edge of elements being parallel to a cleavage direction in C. pelagicus but parallel to the atomic rows in O. fragilis . Thus, there is evidence that the biomineralisation of each species, and also of select areas of coccoliths of the same species, is markedly different.     

Fingerprinting polysaccharides with single-molecule atomic force microscopy

We report the use of an atomic force microscopy (AFM)-based force spectroscopy technique to identify, at the single-molecule level, the components of mixtures of polysaccharides. Previously, we showed that the elasticity of certain types of polysaccharides is governed by force-induced conformational transitions of the pyranose ring. These transitions produce atomic fingerprints in the force-extension spectrum that are characteristic of the ground-energy conformation of the pyranose ring and the type of glycosidic linkages. Using this approach we find that commercially available agarose and lambda-carrageenan contain molecules that, when stretched in an atomic force microscope, produce a force spectrum characteristic of alpha-(1-->4) d-glucans. We have identified these molecules as amylopectin or floridean starch, a storage polysaccharide in algae. Our methodology can identify individual polysaccharide molecules in solution, which is not possible by any other spectroscopic technique, and therefore is an important addition to the arsenal of analytical techniques used in carbohydrate research.     

Visualization of the cruciform structure of superhelical DNA by use of atomic force microscopy

Atomic force microscopy was used to visualize the cruciform structure in supercoiled plasmid pUC8 DNA immobilized on aminomodified mica. The cruciform hairpin was 14 base pairs in size, as determined from atomic force microscopy images of pUC8 DNA in air. Molecular modeling confirmed that the cruciform structure is formed by hairpins with self-complementary homopyrimidine-homopurine sequences (dT)8(dA)6 and a loop 4 nucleotides long.     

Viewing molecules with scanning tunneling microscopy and atomic force microscopy

Two new microscopic techniques make it possible to obtain images of biologically interesting molecules directly in air, vacuum, or under water. Scanning tunneling microscopy and atomic force microscopy both have the capacity to visualize atoms on the surface of rigid structures and provide details of molecular structure for lipids, proteins, carbohydrates, and nucleic acids. In addition to providing visualizations of individual molecules, these scanning probe techniques allow direct imaging of complexes between molecules or between molecules and higher-order subcellular structures such as membranes and cytoskeletal components. Both microscopes can be operated under a variety of ambient conditions ranging from high vacuum to above atmospheric pressure. Specimens need not be dry; both techniques have been used to image molecules in aqueous media under nearly physiological conditions. It is proposed that as these techniques mature they will allow direct observation of many molecular interactions under physiological conditions or even in vivo while they are occurring within the cell.     

Towards nano-physiology of insects with atomic force microscopy

Little study of insects with modern nanotechnology tools has been done so far. Here we use one of such tool, atomic force microscopy (AFM) to study surface oscillations of the ladybird beetles (Hippodamia convergens) measured in different parts of the insect at picometer level. This allows us to record a much broader spectral range of possible surface vibrations (up to several kHz) than the previously studied oscillations due to breathing, heartbeat cycles, coelopulses, etc. (up to 5-10 Hz). Here we demonstrate three different ways with which one can identify the origins of the observed peaks - by physical positioning the probe near a specific organ, and by using biological or chemical stimuli. We report on identification of high frequency peaks associated with H. convergens heart, spiracular closer muscles, and oscillations associated with muscles activated while drinking. The method, being a relatively non-invasive technique providing a new type of information, may be useful in developing “nanophysiology” of insects.     

Imaging of nucleic acids with atomic force microscopy

Atomic force microscopy (AFM) is a key tool of nanotechnology with great importance in applications to DNA nanotechnology and to the recently emerging field of RNA nanotechnology. Advances in the methodology of AFM now enable reliable and reproducible imaging of DNA of various structures, topologies, and DNA and RNA nanostructures. These advances are reviewed here with emphasis on methods utilizing modification of mica to prepare the surfaces enabling reliable and reproducible imaging of DNA and RNA nanostructures. Since the AFM technology for DNA is more mature, AFM imaging of DNA is introduced in this review to provide experience and background for the improvement of AFM imaging of RNA. Examples of imaging different structures of RNA and DNA are discussed and illustrated. Special attention is given to the potential use of AFM to image the dynamics of nucleic acids at the nanometer scale. As such, we review recent advances with the use of time-lapse AFM.     

High-resolution atomic force microscopy of DNA

A method using high resolution atomic force microscopy for imaging DNA has been elaborated. Using super-sharp probes and modified graphite as support for molecule adsorption, DNA molecule images were obtained whose resolution made possible the observation of their fine structure with repeated helical motifs. The method can be used to visualize individual spread molecules of single-stranded DNA.     

Visualization of chromatin folding patterns in chicken erythrocytes by atomic force microscopy （AFM）

The organization of the higher order structure of chromatin in chicken erythrocytes has been examined with tapping-mode scanning force microscopy under conditions close to their native envirinment.Reproducible highresolution AFM images of chromatin compaction at several levels can be demonstrated.An extended beads-on-astring (width of - 15-20nm,height of - 2-3nm for each individual nucleosome) can be consistently observed.Furthermore,superbeade (width of - 40nm,height of - 7nm) are demonstrated.Visualization of the solenoid conformation at the level of 30nm chromatin fiber is attained either by using AFM or by using electron microscopy.In addition,tightly coiled chromatin fibers (- 50-60nm and - 90-110nm) can be revealed.Our data suggest that the chromatin in the interphase nucleus of chicken erythrocyte represents a high-order conformation and AFM provides useful high-resolution structural information concerning the folding pattern of interphase chromatin fibers.