Control of pT181 replication I. The pT181 copy control function acts by inhibiting the synthesis of a replication protein

pT181 is a fully sequenced 4.4-kb 20 copy Tcr plasmid from Staphylococcus aureus. Its replication system involves a unique unidirectional origin embedded in the coding sequence for a plasmid-determined protein, RepC, that is required for initiation. When joined to a 55 copy carrier plasmid, pE194, pT181 excludes autonomous isologous replicons by inhibiting their replication. Two types of spontaneous pT181 copy mutants have been isolated, one that eliminates sensitivity to this inhibition and another that does not. A spontaneous 180-bp deletion, delta 144, eliminates both the inhibitory activity and sensitivity to it. This deletion increases copy number by 50-fold and RepC production by at least 10-fold. It is located directly upstream from the repC coding sequence and the deletion-bearing plasmid supports the replication of inhibitor-sensitive plasmids in cells containing active inhibitor. This effect is probably due to the overproduction of RepC by the delta 144 plasmid. On the basis of these results, it is suggested that RepC synthesis is negatively controlled by an inhibitor that is encoded directly upstream from the repC coding sequence and acts as a tareget set in the same region. It is likely, therefore, that pT181 replication rate is determined by the level of RepC.     

The PcrA3 mutant binds DNA and interacts with the RepC initiator protein of plasmid pT181 but is defective in its DNA helicase and unwinding activities

Plasmid rolling-circle replication initiates by covalent extension of a nick generated at the plasmid double-strand origin (dso) by the initiator protein. The RepC initiator protein binds to the plasmid pT181 dso in a sequence-specific manner and recruits the PcrA helicase through a protein-protein interaction. Subsequently, PcrA unwinds DNA at the nick site followed by replication by DNA polymerase III. The pcrA3 mutant of Staphylococcus aureus has previously been shown to be defective in plasmid pT181 replication. Suppressor mutations in the repC initiator gene have been isolated that allow pT181 replication in the pcrA3 mutant. One such suppressor mutant contains a D57Y change in the RepC protein. To identify the nature of the defect in PcrA3, we have purified this mutant protein and studied its biochemical activities. Our results show that while PcrA3 retains its DNA binding activity, it is defective in its helicase and RepC-dependent pT181 DNA unwinding activities. We have also purified the RepC D57Y mutant and shown that it is similar in its biochemical activities to wild-type RepC. RepC D57Y supported plasmid pT181 replication in cell-free extracts made from wild-type S. aureus but not from the pcrA3 mutant. We also demonstrate that both wild-type RepC and its D57Y mutant are capable of a direct physical interaction with both wild-type PcrA and the PcrA3 mutant. Our results suggest that the inability of PcrA3 to support pT181 replication is unlikely to be due to its inability to interact with RepC. Rather, it is likely that a defect in its helicase activity is responsible for its inability to replicate the pT181 plasmid.     

Control of replication of plasmid R1: the intergenic region between copA and repA modulates the level of expression of repA

The RepA protein of plasmid R1 is rate-limiting for initiation of R1 replication. Its synthesis is mainly regulated by interactions of the antisense RNA, CopA, with the leader region of the RepA mRNA, CopT. This work describes the characterization of several mutants with sequence alterations in the intergenic region between the copA gene and the repA reading frame. The analysis showed that most of the mutations led both to a decrease in stability of maintenance of mini-R1 derivatives and to lowered repA expression assayed in translational repA-lacZ fusion constructs. Destruction of the copA gene and replacement of the upstream region by the tac promoter in the latter constructs indicated that these mutations per se alter the expression of repA. In addition, we show that particular mutations in this region can directly affect CopA-mediated control, either by changing the kinetics of interaction of CopA RNA with the RepA mRNA and/or by modifying the activity of the copA promoter. These data indicate the importance of the region analysed in the process that controls R1 replication.     

Replication-specific conversion of the Staphylococcus aureus pT181 initiator protein from an active homodimer to an inactive heterodimer.

The Staphylococcus aureus rolling circle plasmid pT181 regulates its replication by controlling the synthesis of its initiator protein RepC. RepC is inactivated during pT181 replication by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC*. We analyzed RepC and RepC* in four classes of mutants: plasmid copy number mutants, two classes of RepC mutants affecting different portions of the protein and oriC (origin) mutants. We have found that in the cell with wild-type RepC there are similar relative amounts of RepC and RepC*, regardless of copy number, and that the conversion of RepC to RepC* is replication dependent. Genetic and biochemical evidence is presented that RepC functions as a dimer and that during replication the RepC homodimer is converted to the RepC/RepC* heterodimer.     

Measurement of gene expression by translational coupling: effect of copy mutations on pT181 initiator synthesis.

We have prepared and analyzed two types of gene fusion between the replication initiator gene, repC, and the reporter gene, blaZ, in order to investigate the relationship between pT181 plasmid copy number and RepC initiator protein production. A series of pT181 copy mutant plasmids, with copy numbers ranging from 70 to 800 copies per cell, were analyzed. In one type of gene fusion used in this study, blaZ was translationally coupled to the C-terminal end of the repC coding sequence such that native forms of both proteins were produced. This gene fusion arrangement, which permitted monitoring of RepC production (as BlaZ activity) by plasmids using the protein for their own replication, demonstrated a linear relationship, with one exception, between RepC production and plasmid copy number over a 20-fold range. In the second type of fusion, blaZ was translationally fused to the C-terminal end of repC. As the translational fusion did not produce active RepC protein, the fusion-containing pT181 derivatives were maintained in a strain which provided RepC in trans, and were thus analyzed at constant copy number. In contrast to previous analyses of this type, our translational fusion constructs expressed repC at levels proportional to the copy numbers of the plasmids from which the fusions were prepared. Using these data, we have calculated a minimum figure for the number of RepC molecules synthesized per replication event.     

RepC is rate limiting for pT181 plasmid replication

The effect on pT181 plasmid replication of the concentration of the plasmid-coded initiator protein, RepC, has been analyzed. In one type of experiment, plasmid replication was found to stop immediately after the addition of an inhibitory concentration of chloramphenicol (Cm) to growing cultures. Chromosomal replication showed the slow turnoff that is usual for Cm inhibition. Because plasmid replication rate is determined autogenously, no host factor can be rate limiting, suggesting that the specific factor affected is Rep C. In another type of experiment, we constructed a translational fusion between the repC coding sequence and a translationally inducible Cm-acetylase gene, cat-86, using pUB110 as the carrier replicon. The fusion plasmid showed an eightfold amplification of its own copy number and a similar amplification of a co-resident pT181 plasmid upon Cm induction. The amplified plasmids did not show autocatalytic runaway replication but rather established stable elevated copy numbers, indicating the existence of a secondary level of regulation. These results suggest that RepC is rate limiting for pT181 replication and support the hypothesis that pT181 replication is regulated at the level of RepC synthesis. The nature of the secondary regulation is unknown.     

The inactivated plasmid inititator protein RepC/RepC* may have a regulatory role.

During replication of the plasmid pT181, the initiator protein RepC is modified by the addition of an oligodeoxynucleotide, giving rise to a new form, RepC*. Here we show that during in vitro replication, RepC* is radioactively labeled, suggesting that the source of the RepC* oligodeoxynucleotide is the newly synthesized pT181 DNA. The RepC/RepC* heterodimer retains its ability to bind the pT181 double-strand origin and, therefore, it may act as a competitive inhibitor of the RepC homodimer during replication.     

Plasmid pT181 replication is decreased at high levels of RepC per plasmid copy

The replication of staphylococcal plasmid pT181 is indirectly controlled at the level of the synthesis of its replication initiator, RepC. As a result, high levels of RepC synthesis per plasmid copy were expected to lead to autocatalytic plasmid replication, which secondarily would affect host physiology. Surprisingly, RepC overexpression was found to lead to a rapid decrease in pT181 copy number and replication rate. These effects depended on the ratio of RepC lo the PT181 replication origin rather than on the absolute amount of RepC in the cell. In a wild-type host, the increase in RepC/plasmid copy also inhibited chromosome replication and cell division. The changes in host physiology did not play any role in the decrease in pT181 replication caused by RepC overexpression since pT181 replication responded in the same way in a host mutant insensitive to the effects of RepC induction. These results suggest that pT181, the prototype of an entire class of plasmids from Gram-positive bacteria, responds to overexpression of its replication initiator by a decrease in plasmid replication.     

Functional organization of the plasmid pT181 replication origin

Replication of the staphylococcal plasmid pT181 is initiated at the origin (ori) with the introduction of a site-specific nick by the plasmid-encoded initiator protein RepC. Deletion analysis showed that a sequence of about 70 base-pairs is required for full ori function, including the ability to compete with a co-resident wild-type origin for the trans-acting RepC protein. A shorter sequence of 43 base-pairs is sufficient for origin function in the absence of competition. Single and double point mutations within these 43 base-pairs were used to determine the sequence requirement for replication within the minimal origin. Deletion mutants and point mutants were tested in replication and competition assays in vivo and in vitro, and in a RepC-mediated nicking assay.     

Reciprocal intrapool variation in plasmid copy numbers: a characteristic of segregational incompatibility

An experimental analysis of the concept that incompatible plasmids occupy a common intracellular pool from which copies are drawn at random for replication and assortment is presented. Intrapool variations in an incompatible heteroplasmid strain are inevitable and it is shown that these variations can be exploited by differential selection to amplify one plasmid at the expense of the other. Constant overall copy number is demonstrated for isogenic wild-type replicons and also for isogenic copy mutants whose copy numbers are so great that segregational incompatibility cannot be measured. In the test system used, that of the Staphylococcus aureus plasmid pT181, the rate of replication is probably determined by the availability of a trans-active initiator protein, RepC. In heteroplasmid strains containing wild-type and dominant copy mutant plasmids, although intrapool variation occurs, the total copy number is not constant but varies as a consequence of selection for or against the mutant plasmid. This is because all of the RepC is synthesized from the mutant plasmid (the wild-type is hyper-repressed) and therefore the selection affects the supply of RepC at the same time that it affects the copy number of the plasmid. None of these effects are seen with single plasmids or with compatible pairs.     

Plasmid pT181-linked suppressors of the Staphylococcus aureus pcrA3 chromosomal mutation.

Plasmid pT181 replication is affected in hosts carrying the chromosomal pcrA3 mutation, resulting in significantly lower plasmid copy numbers. Mutations suppressing this effect have been isolated and characterized. The suppressor mutations were found to map in the plasmid repC gene and manifested pcrA allele specificity, suggesting the existence of a direct RepC-PcrA interaction.     

Specificity of RepC protein in plasmid pT181 DNA replication

The plasmid pT181 of Staphylococcus aureus consists of 4437 base pairs and encodes resistance to tetracycline. Initiation of pT181 DNA replication specifically requires the plasmid-encoded initiator protein, RepC. The initiator protein binds specifically to a 32-base pair sequence within the pT181 origin of replication. RepC protein also has a nicking-closing activity that is specific for the pT181 origin. Replication of pT181 initiates by covalent extension of the nick and proceeds by a rolling circle mechanism. Two other small, multicopy plasmids pC221 and pS194 belong to the pT181 family and have common structural organization and replication properties. The replication proteins and replication origins of these plasmids have extensive sequence homologies, although they belong to different incompatibility groups. In spite of this homology, the replication proteins and replication origins of these three plasmids do not show any cross-reactivity in vivo. We have carried out a series of in vitro experiments to determine the specificity of pT181-encoded initiator protein, RepC. DNA binding experiments showed that although the binding of RepC to the pT181 origin was very efficient, little or no binding was seen with pC221 and pS194 origins. The nicking-closing activity of RepC was found to be equally efficient with the pC221 and pS194 plasmids. The plasmids pC221 and pS194 replicated efficiently in a RepC-dependent in vitro system. However, replication of these plasmids was greatly reduced in the presence of a competing pT181 origin. The results presented here suggest that nicking-closing by RepC at the origin is not sufficient for maximal replication and that tight binding of RepC to the origin plays an important role in the initiation of DNA replication.     

An 18-base-pair sequence is sufficient for termination of rolling-circle replication of plasmid pT181.

pT181 and related plasmids of gram-positive bacteria replicate by a rolling-circle mechanism. The replication initiator protein of pT181, RepC, has origin-specific nicking-closing activities. Replication of the plasmid pT181 leading strand initiates by covalent extension of the RepC-generated nick, and the origin of replication contains signals for both initiation and termination of DNA replication. We have investigated the sequence requirements for the initiation and termination steps by using plasmids containing two pT181 origins. In vitro replication experiments showed that 18- and 24-bp synthetic oligonucleotides containing the RepC nick site were active in the termination of replication. However, initiation of replication required a larger region which also includes the RepC binding site. Plasmids containing the 18- and 24-bp region were also found to be nicked by the RepC protein. Our results demonstrate that sequence requirements for initiation and termination of pT181 replication overlap, but while the RepC binding site is required for initiation, it is dispensable for termination.     

In vitro inhibitory activity of RepC/C*, the inactivated form of the pT181 plasmid initiation protein, RepC.

pT181 is a Staphylococcus aureus rolling circle plasmid that regulates its replication by controlling the synthesis of its dimeric initiator protein RepC/C and by inactivating the protein following its use in replication (A. Rasooly and R. P. Novick, Science 262:1048-1050, 1993). This inactivation consists of the addition of an oligonucleotide, representing several nucleotides immediately 3' to the initiation nick site, to the active site tyrosine of one of the two subunits, generating a heterodimer, RepC/C*. Previous results suggested that the inactive form was metabolically stable and was present at a much higher level than the active form (A. Rasooly and R. P. Novick, Science 262:1048-1050, 1993). In the present study we have measured total RepC antigen as a function of plasmid copy number and have analyzed the interaction of the two forms. We find that pT181-containing staphylococci contain approximately one RepC dimer per plasmid copy over a 50-fold range of copy numbers. This is consistent with previous measurements of the rate of RepC synthesis, which suggested that one RepC dimer is synthesized per replication event (J. Bargonetti, P.-Z. Wang and R. P. Novick, EMBO J. 12:3659-3667, 1993). The RepC/C* heterodimer, which is inactive for replication, is a competitive inhibitor of the replication and the topoisomerase-like and cruciform-enhancing activities of the native protein. These results suggest that the inactive form may have a specific regulatory role in vivo. Since the known plasmid-determined controls, which maintain a constant plasmid copy number, are designed to ensure the synthesis of one RepC/C dimer per plasmid replication event, it is difficult to envision any role for yet another negative regulator of replication. Conceivably, under conditions where the initiator is overproduced, such as in the absence of the normal antisense regulation of initiator production, RepC/C* could serve as a fail-safe means of preventing autocatalytic replication.     

Replication control in plasmid R1: duplex formation between the antisense RNA, CopA, and its target, CopT, is not required for inhibition of RepA synthesis.

The replication frequency of plasmid R1 is regulated by an antisense RNA, CopA, which inhibits the synthesis of the rate-limiting initiator protein RepA. The inhibition requires an interaction between the antisense RNA and its target, CopT, in the leader of the RepA mRNA. This binding reaction has previously been studied in vitro, and the formation of a complete RNA duplex between the two RNAs has been demonstrated in vitro and in vivo. Here we investigate whether complete duplex formation is required for CopA-mediated inhibition in vivo. A mutated copA gene was constructed, encoding a truncated CopA which is impaired in its ability to form a complete CopA/CopT duplex, but which forms a primary binding intermediate (the 'kissing complex'). The mutated CopA species (S-CopA) mediated incompatibility against wild-type R1 plasmids and inhibited RepA-LacZ fusion protein synthesis. Northern blot, primer extension and S1 analyses indicated that S-CopA did not form a complete duplex with CopT in vivo since bands corresponding to RNase III cleavage products were missing. An in vitro analysis supported the same conclusion. These data suggest that formation of the 'kissing complex' suffices to inhibit RepA synthesis, and that complete CopA/CopT duplex formation is not required. The implications of these findings are discussed.     

Purification of pT181-encoded repC protein required for the initiation of plasmid replication

The plasmid pT181 of Staphylococcus aureus consists of 4437 base pairs and encodes resistance to tetracycline. Initiation of pT181 replication specifically requires the plasmid-encoded repC protein. An in vitro system has been shown to carry out semiconservative replication of pT181 and its derivative plasmids (Khan, S A., Carleton, S. M., and Novick, R. P. (1981) Proc. Natl. Acad. Sci. U. S. A. 78, 4902-4906). We have used this replication assay to isolate repC protein, which was purified to near homogeneity. The repC gene was cloned into the pKJB825 plasmid that contains the phage lambda temperature-sensitive repressor gene, cI857, and the rightward promoter, PR. Upon temperature induction, Escherichia coli clones containing the recombinant plasmid overproduced repC protein, which was purified in significant quantities. The molecular weight of repC protein under denaturing conditions is 38,000, which is consistent with the size predicted from the DNA sequence data. Presence of repC protein was absolutely essential for the initiation of replication of pT181 and its derivatives in vitro.