Characterization of a thermostable lipase showing loss of secondary structure at ambient temperature

A gene encoding extracellular lipase was cloned and characterized from metagenomic DNA extracted from hot spring soil. The recombinant gene was expressed in E. coli and expressed protein was purified to homogeneity using hydrophobic interactions chromatography. The mature polypeptide consists of 388 amino acids with apparent molecular weight of 43 kDa. The enzyme displayed maximum activity at 50°C and pH 9.0. It showed thermal stability up to 40°C without any loss of enzyme activity. Nearly 80% enzyme activity was retained at 50°C even after incubation for 75 min. However above 50°C the enzyme displayed thermal instability. The half life of the enzyme was determined to be 5 min at 60°C. Interestingly the CD spectroscopic study carried out in the temperature range of 25–95°C revealed distortion in solution structure above 35°C. However the intrinsic tryptophan fluorescence spectroscopic study revealed that even with the loss of secondary structure at 35°C and above the tertiary structure was retained. With p-nitrophenyl laurate as a substrate, the enzyme exhibited a K _m , V _max and K _cat of 0.73 ± 0.18 μM, 239 ± 16 μmol/ml/min and 569 s⁻¹ respectively. Enzyme activity was strongly inhibited by CuCl₂, HgCl₂ and DEPC but not by PMSF, eserine and SDS. The protein retained significant activity (~70%) with Triton X-100. The enzyme displayed 100% activity in presence of 30% n-Hexane and acetone.     

Characteristics of the amylase of Arthrobacter psychrolactophilus

Properties of the extracellular amylase produced by the psychrotrophic bacterium, Arthrobacter psychrolactophilus, were determined for crude preparations and purified enzyme. The hydrolysis of soluble starch by concentrated crude preparations was found to be a nonlinear function of time at 30 and 40 °C. Concentrates of supernatant fractions incubated without substrate exhibited poor stability at 30, 40, or 50 °C, with 87% inactivation after 21 h at 30 °C, 45% inactivation after 40 min at 40 °C and 90% inactivation after 10 min at 50 °C. Proteases known to be present in crude preparations had a temperature optimum of 50 °C, but accounted for a small fraction of thermal instability. Inactivation at 30, 40, or 50 °C was not slowed by adding 20 mg/ml bovine serum albumin or protease inhibitor cocktail to the preparations or the assays to protect against proteases. Purified amylase preparations were almost as thermally sensitive in the absence of substrate as crude preparations. The temperature optimum of the amylase in short incubations with Sigma Infinity Amylase Reagent was about 50 °C, and the amylase required Ca⁺² for activity. The optimal pH for activity was 5.0–9.0 on soluble starch (30 °C), and the amylase exhibited a K _m with 4-nitrophenyl-α-D-maltoheptaoside-4,6-O-ethylidene of 120 μM at 22 °C. The amylase in crude concentrates initially hydrolyzed raw starch at 30 °C at about the same rate as an equal number of units of barley α-amylase, but lost most of its activity after only a few hours.     

Some factors affecting the stability of glucoamylase immobilized on hornblende and on other inorganic supports

Glucoamylase from four different companies was studied: three had similar stability (half-life at 50°C about 140 hr); the fourth was less stable (half-life at 50°C about 20 hr). The immobilized enzymes were all less stable than their soluble counterparts: immobilized enzyme stability depended on the soluble enzyme used, the support, and method of immobilization. Thus enzyme bound to Enzacryl-TIO was less stable than enzyme bound to hornblende (metal-link method); this, in turn, was less stable than enzyme bound to hornblende by a silane–glutaraldehyde process. Bound enzyme stability was also improved by the presence of substrate or product (starch maltose or glucose). After 110 hr at 50°C in the presence of maltose (10% (w/v)) one preparation (a more stable soluble enzyme boul1d to hornblende by a silane–glutaraldehyde process) retained over 95% of its activity: activity loss was too low to permit the estimation of a half-life.     

Purification and Some Properties of Cyclomaltodextrin Glucanotransferase from Bacillus circulans

Cyclomaltodextrin glucanotransferase was purified from B. circulans C31 through two successive steps of starch and Biogel column chromatography. The enzyme was purified up to 90-fold with a 30% yield. Its molecular weight was around 103,000. The purified enzyme converted 28% of the soluble starch to β-cyclodextrin at pH 7.0 and a substrate concentration of 5%. The optimum pH for the enzyme was found to be 5.5. The optimum temperature was 60°C. The enzyme optimum was stable from pH 5.5~9.0 and up to 50°C.     

Characterization of Active Lentinula edodes Glucoamylase Expressed and Secreted by Saccharomyces cerevisiae

The gene encoding Lentinula edodes glucoamylase (GLA) was cloned into Saccharomyces cerevisiae, expressed constitutively and secreted in an active form. The enzyme was purified to homogeneity by (NH₄)₂SO₄ fractionation, anion exchange and affinity chromatography. The protein had a correct N-terminal sequence of WAQSSVIDAYVAS, indicating that the signal peptide was efficiently cleaved. The recombinant enzyme was glycosylated with a 2.4% carbohydrate content. It had a pH optimum of 4.6 and a pH 3.4–6.4 stability range. The temperature optimum was 50°C with stability ≤50°C. The enzyme showed considerable loss of activity when incubated with glucose (44%), glucosamine (68%), galactose (22%), and xylose (64%). The addition of Mn⁺⁺ activated the enzyme by 45%, while Li⁺, Zn⁺⁺, Mg⁺⁺, Cu⁺, Ca⁺⁺, and EDTA had no effect. The enzyme hydrolyzed amylopectin at rates 1.5 and 8.0 times that of soluble starch and amylose, respectively. Soluble starch was hydrolyzed 16 and 29 times faster than wheat and corn starch granules, respectively, with the hydrolysis of starch granules using 10× the amount of GLA. Apparent K_m and V_max for soluble starch were estimated to be 3.0 mg/ml and 0.13 mg/ml/min (40°C, pH 5.3), with an apparent k_cat of 2.9×10⁵ min⁻¹.     

Immobilization of glucoamylase onto polyaniline-grafted magnetic hydrogel via adsorption and adsorption/cross-linking

Glucoamylase (GA) was immobilized onto polyaniline (PANI)-grafted magnetic poly(2-hydroxyethylmethacrylate-co-glycidylmethacrylate) hydrogel (m-p(HEMA-GMA)-PANI) with two different methods (i.e., adsorption and adsorption/cross-linking). The immobilized enzyme preparations were used for the hydrolysis of “starch” dextrin. The amount of enzyme loading on the ferrogel was affected by the medium pH and the initial concentration of enzyme. The maximum loading capacity of the enzyme on the ferrogel was found to be 36.7 mg/g from 2.0 mg/mL enzyme solution at pH 4.0. The adsorbed GA demonstrated higher activity (59%) compared to adsorbed/cross-linked GA (43%). Finally, the immobilized GA preparations exhibited greater stability against heat at 55 °C and pH 4.5 compared to free enzyme (50 °C and pH 5.5), suggesting that the ferrogel was suitable support for immobilization of glucoamylase.     

Purification and characterization of α-amylase fromAspergillus flavus

Aspergillus flavus produced approximately 50 U/mL of amylolytic activity when grown in liquid medium with raw low-grade tapioca starch as substrate. Electrophoretic analysis of the culture filtrate showed the presence of only one amylolytic enzyme, identified as an α-amylase as evidenced by (i) rapid loss of color in iodine-stained starch and (ii) production of a mixture of glucose, maltose, maltotriose and maltotetraose as starch digestion products. The enzyme was purified by ammonium sulfate precipitation and ion-exchange chromatography and was found to be homogeneous on sodium dodecyl sulfate— polyacrylamide gel electrophoresis. The purified enzyme had a molar mass of 52.5±2.5 kDa with an isoelectric point at pH 3.5. The enzyme was found to have maximum activity at pH 6.0 and was stable in a pH range from 5.0 to 8.5. The optimum temperature for the enzyme was 55°C and it was stable for 1 h up to 50°C. TheK _m andV for gelatinized tapioca starch were 0.5 g/L and 108.67 μmol reducing sugars per mg protein per min, respectively.     

Enhancement of operation and storage stability of glucoamylase from Aspergillus awamori by a protease inhibitor preparation

Glucoamylase was produced extracellularly by fermentation of strain Aspergillus awamori, which had been genetically modified to have high-level glucoamylase activity. Initial experiments showed that the enzyme deactivated quickly, with a half-life of less than 6 days even stored at 5°C. A possible reason for the rapid deactivation was the presence of proteases, attacking and degrading the glucoamylase. Therefore a liquid protease inhibitor cocktail (Sigma, USA) was selected and applied to enhance the stability of the enzyme. The activity of the enzyme (stored at 5°C) measured by the Schoorl-method with starch as substrate showed that the cocktail was effective with the enzyme maintaining 95% of its initial storage activity for almost one year. The enzyme preparation has been used for starch hydrolysis in a flat-sheet membrane bioreactor at 60°C to manufacture glucose solution and its operation stability extended by using the cocktail.     

Synergistic Action of Recombinant α-Amylase and Glucoamylase on the Hydrolysis of Starch Granules

Barley α-amylase 1 mutant (AMY) and Lentinula edodes glucoamylase (GLA) were cloned and expressed in Saccharomyces cerevisiae. The purified recombinant AMY hydrolyzed corn and wheat starch granules, respectively, at rates 1.7 and 2.5 times that of GLA under the same reaction conditions. AMY and GLA synergistically enhanced the rate of hydrolysis by ∼3× for corn and wheat starch granules, compared to the sum of the individual activities. The exo-endo synergism did not change by varying the ratio of the two enzymes when the total concentration was kept constant. A yield of 4% conversion was obtained after 25 min 37°C incubation (1 unit total enzyme, 15 mg raw starch granules, pH 5.3). The temperature stability of the enzyme mixtures was ≤50°C, but the initial rate of hydrolysis continued to increase with higher temperatures. Ca⁺⁺ enhanced the stability of the free enzymes at 50°C incubation. Inhibition was observed with the addition of 10 mM Fe⁺⁺ or Cu⁺⁺, while Mg⁺⁺ and EDTA had lesser effect. Reference to a company and/or products is only for purposes of information and does not imply approval of recommendation of the product to the exclusion of others that may also be suitable. All programs and services of the U.S. Department of Agriculture are offered on a nondiscriminatory basis without regard to race, color, national origin, religion, sex, age, marital status, or handicap.     

The potential of immobilized bacterial α-amylase on coconut coir,a smart carrier for biocatalysts

Purified α-amylase from a soil bacterium Bacillus sp. SKB4 was immobilized on coconut coir, an inexpensive cellulosic fiber, with the cross-linking agent glutaraldehyde. The catalytic properties and stability of the immobilized enzyme were compared with those of its soluble form. The enzyme retained 97.2% of its activity and its catalytic properties were not drastically altered after immobilization. The pH optimum and stability of the immobilized enzyme were shifted towards the alkaline range compared to the free enzyme. The optimum temperature for enzymatic activity was 90°C in both forms of the enzyme. The soluble and immobilized enzyme retained 19% and 70% of original activity, respectively, after pre-incubation for 1 h at 90°C. Immobilized amylase was less susceptible to attack by heavy metal ions and showed higher K_m and V_max values than its free form. The bound enzyme showed significant activity and stability after 6 months of storage at 4°C. All of these characteristics make the new carrier system suitable for use in the bioprocess and food industries.     

Purification and Properties of Neutral-cyclodextrin Glycosyl-transferase of an Alkalophilic Bacillus sp.

Neutral-cyclodextrin glycosyltransferase (EC 3.2.1.19) of alkalophilic Bacillus sp. (ATCC 21783) was purified by starch adsorption, DEAE-cellulose chromatography and Sephadex G–150 gel filtration chromatography followed by preparative polyacrylamide gel electrophoresis. Molecular weight of the purified enzyme was 85,000-88,000 by SDS-disc gel electrophoresis. The enzyme was most active at pH 7 and 50°C, and stable up to 60°C at pH 7 and in the range of pH 6~8 at 60°C by 30 min incubation. The apparent V_max and Km values for α- and β-cyclodextrin at a constant concentration of sucrose were 417, 70 µmoles glucose/min · mg protein and 10, 0.83 nm, respectively. About 85~90% of amylose, 75~80% of potato starch, 65~70% of amylopectin, 55~60% of glycogen, 45~50% of amylopectin β-limit dextrin, 20~25% of maltotriose and 10~15% of maltose were converted to cyclodextrins with 0.5~1% (w/v) of each substrate.

Schardinger β-dextrin was preferentially produced from starch, and α- or γ-dextrin was gradually formed after prolonged incubation. After 20 min incubation, about 0.4, 14 and 2.5% of α-, β- and γ-dextrin were formed from starch, respectively.     

Proteomic characterization and antifungal activity of potato tuber proteins isolated from starch production waste under different temperature regimes

Proteins were obtained from effluent of a starch manufacture by using different isolation temperatures (40, 60, 80, and 100 °C). The proteins, remaining in effluent after treatment of potato juice at 80 and 100 °C differed significantly in composition and in structural stability as well as in trypsin inhibitory and antifungal activities in comparison with the variants of 40 and 60 °C. The protein samples of 80 °C exhibited the highest antifungal activity and its average value of IC₅₀ against five strains of two Fusarium species was determined in average at 0.18 mg ml⁻¹. The 80 °C protein samples consisted predominantly of low-molecular proteins (7–17 kDa) identified as potato tuber protease inhibitors I and II. Predominantly, protease inhibitors II were identified for the protein samples obtained by 100 °C and here we identified 7 spots in comparison with 12 identified for the 80 °C samples. Samples of 40 and 60 °C with low antifungal activities represent high variability of detected and identified proteins. We identified various representatives of aspartic, cysteine, and serine protease inhibitors in both types of samples. These samples also contained Kunitz-type protease inhibitors that were not found in the 80 and 100 °C samples which documented thermal unstableness of Kunitz-type protease inhibitors. Functional stability at high temperatures and antifungal activity of isolated potato protease inhibitors I and II support the potential of this fraction usage in food, feed, pharmaceutical, or agricultural industry and offer new products for starch manufactures. At the same time, utilization of the stable protein fraction of waste deproteinized potato water promotes exploitation of potato starch production resources.

     

Development of a serial bioreactor system for direct ethanol production from starch using<Emphasis Type="Italic">Aspergillus niger</Emphasis> and<Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Aspergillus niger hyphae were found to grow with unliquefied potato starch under aerobic conditions, but did not grow under anaerobic conditions. The raw culture ofA. niger catalyzed saccharification of potato starch to glucose, producing approximately 12 g glucose/L/day/ The extracellular enzyme activity was decreased in proportion to incubation time, and approximately 64% of initial activity was maintained after 3 days. At 50°C,A. niger hyphae growth stopped, while the extracellular enzyme activity peaked. On the basis of theA. niger growth property and enzyme activity, we designed a serial bioreactor system composed of four different reactors. Fungal hyphae were cultivated in reactor I at 30°C, uniquefied starch was saccharified to glycose by a fungal hyphae culture in reactors II and III at 50°C, and glucose was fermented to ethanol bySaccharomyces cerevisiae in reactor IV. The total glucose produced by fungal hyphae in reactor I and saccharification in reactor II was about 42 g/L/day. Ethanol production in reactor IV was approximately 22 g/L/day, which corresponds to about 79% of the theoretical maximum produced from 55 g starch/L/day.     

Purification and properties of a novel raw starch degrading cyclomaltodextrin glucanotransferase from Bacillus firmus

A novel raw starch degrading cyclomaltodextrin glucanotransferase (CGTase; E.C. 2.4.1.19), produced by Bacillus firmus, was purified to homogeneity by ultrafiltration, affinity and gel filtration chromatography. The molecular weight of the pure protein was estimated to be 78 000 and 82 000 Da, by SDS-PAGE and gel filtration, respectively. The pure enzyme had a pH optimum in the range 5.5–8.5. It was stable over the pH range 7–11 at 10 °C, and at pH 7.0 at 60 °C. The optimum temperature for enzyme activity was 65 °C. In the absence of substrate, the enzyme rapidly lost its activity above 30 °C. K _m and k _cat for the pure enzyme were 1.21 mg/ml and 145.17 μM/mg per minute respectively, with soluble starch as the substrate. For cyclodextrin production, tapioca starch was the best substrate used when gelatinized, while wheat starch was the best substrate used when raw. This CGTase could degrade raw wheat starch very efficiently; up to 50% conversion to cyclodextrins was obtained from 150 g/l starch without using any additives. The enzyme produced α-, β- and γ-cyclodextrins in the ratio of 0.2:9.2:0.6 and 0.2:8.6:1.2 from gelatinized tapioca starch and raw wheat starch with 150 g/l concentration respectively, after 18 h incubation. Received: 25 September 1998 / Received revision: 15 December 1998 / Accepted: 21 December 1998     

A novel thermostable nitrilase superfamily amidase from <Emphasis Type="Italic">Geobacillus pallidus</Emphasis> showing acyl transfer activity

An amidase (EC 3.5.1.4) in branch 2 of the nitrilase superfamily, from the thermophilic strain Geobacillus pallidus RAPc8, was produced at high expression levels (20 U/mg) in small-scale fermentations of Escherichia coli. The enzyme was purified to 90% homogeneity with specific activity of 1,800 U/mg in just two steps, namely, heat-treatment and gel permeation chromatography. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and electron microscopic (EM) analysis of the homogenous enzyme showed the native enzyme to be a homohexamer of 38 kDa subunits. Analysis of the biochemical properties of the amidase showed that the optimal temperature and pH for activity were 50 and 7.0°C, respectively. The amidase exhibited high thermal stability at 50 and 60°C, with half-lives greater than 5 h at both temperatures. At 70 and 80°C, the half-life values were 43 and 10 min, respectively. The amidase catalyzed the hydrolysis of low molecular weight aliphatic amides, with d-selectivity towards lactamide. Inhibition studies showed activation/inhibition data consistent with the presence of a catalytically active thiol group. Acyl transfer reactions were demonstrated with acetamide, propionamide, isobutyramide, and acrylamide as substrates and hydroxylamine as the acyl acceptor; the highest reaction rate being with isobutyramide. Immobilization by entrapment in polyacrylamide gels, covalent binding on Eupergit C beads at 4°C and on Amberlite-XAD57 resulted in low protein binding and low activity, but immobilization on Eupergit C beads at 25°C with cross-linking resulted in high protein binding yield and high immobilized specific activity (80% of non-immobilized activity). Characterization of Eupergit C-immobilized preparations showed that the optimum reaction temperature was unchanged, the pH range was somewhat broadened, and stability was enhanced giving half-lives of 52 min at 70°C and 30 min at 80°C. The amidase has potential for application under high temperature conditions as a biocatalyst for d-selective amide hydrolysis producing enantiomerically pure carboxylic acids and for production of novel amides by acyl transfer.     

Allosteric serine hydroxymethyltransferase from monkey liver: Temperature induced conformational transitions

The homogeneous serine hydroxymethyltransferase from monkey liver was optimally activate at 60°C and the Arrhenius plot for the enzyme was nonlinear with a break at 15°C. The monkey liver enzyme showed high thermal stability of 62°C, as monitored by circular dichroism at 222 nm, absorbance at 280 nm and enzyme activity. The enzyme exhibited a sharp co-operative thermal transition in the range of 50°–70°(T _m= 65°C), as monitored by circular dichroism. L-Serine protected the enzyme against both thermal inactivation and thermal disruption of the secondary structure. The homotropic interactions of tetrahydrofolate with the enzyme was abolished at high temperatures (at 70°C, the Hill coefficient value was 1.0). A plot ofh values vs. assay temperature of tetrahydrofolate saturation experiments, showed the presence of an intermediate conformer with anh value of 1.7 in the temperature range of 45°–60°C. Inclusion of a heat denaturation step in the scheme employed for the purification of serine hydroxymethyltransferase resulted in the loss of cooperative interactions with tetrahydrofolate. The temperature effects on the serine hydroxylmethyltransferase, reported for the first time, lead to a better understanding of the heat induced alterations in conformation and activity for this oligomeric protein.     

Common Vetch (<Emphasis Type="Italic">Vicia sativa</Emphasis>) as a New Starch Source: Its Thermal,Rheological and Structural Properties After Acid Hydrolysis

The common vetch plant is used mainly for animal nutrition. The seeds from this leguminous plant contain a relatively high quantity of starch. There are few studies regarding common vetch and this research was designed to evaluate the thermal, rheological and structural properties of the starch extracted from common vetch seeds, both native and after treatment with HCl at different concentrations (0.1 mol L^?1 and 0.3 mol L^?1) and temperatures (25 °C and 50 °C). The curves obtained from differential scanning calorimetry showed an increase in the peak and conclusion temperatures after the acid modification. The thermogravimetric curves of the native and acid-modified samples presented three characteristic mass losses, with higher thermal stability after acid modification. The viscoamilographic analysis showed an increase in the final and peak viscosities for the common vetch starch after the treatment, which was probably due to the hydrolysis of the protein that was present in the sample. The micro-images obtained by field emission gun-scanning electron microscopy showed that the granular structure of the starch was not affected after acid treatment. The diffractometry analysis showed the same C-type pattern for all the samples. The common vetch starch presented interesting properties that could lead to different uses in industry and aggregate more value for this product.     

Purification,biochemical characterization and gene sequencing of a thermostable raw starch digesting α-amylase from Geobacillus thermoleovorans subsp. stromboliensis subsp. nov.

This study reports the purification and biochemical characterization of a raw starch-digesting α-amylase from Geobacillus thermoleovorans subsp. stromboliensis subsp. nov. (strain Pizzo^T). The molecular weight was estimated to be 58 kDa by SDS–PAGE. The enzyme was highly active over a wide range of pH from 4.0–10.0. The optimum temperature of the enzyme was 70°C. It showed extreme thermostability in the presence of Ca²⁺, retaining 50% of its initial activity after 90 h at 70°C. The enzyme efficiently hydrolyzed 20% (w/v) of raw starches, concentration normally used in starch industries. The α-amylase showed an high stability in presence of many organic solvents. In particular the residual activity was of 73% in presence of 15% (v/v) ethyl alcohol, which corresponds to ethanol yield in yeast fermentation process. By analyzing its complete amyA gene sequence (1,542 bp), the enzyme was proposed to be a new α-amylase.     

A new thermolabile alkaline phospholipase D from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. CS628

A phospholipase D (PLD₆₂₈), constitutively secreted by Streptomyces sp. CS628, was purified by ion exchange with CM Trisacryl and gel filtration with Sepharose CL-6B. The enzyme production was highest with peptone and starch as nitrogen and carbon sources, and at 30°C with an initial medium pH of 7.5. Molecular weight, optimum pH, optimum temperature, pH stability, and thermostability of the enzyme were 50 kDa, pH 9.6, 30°C, pH 5.7 ∼ 10.6 and ≤30°C, respectively. Detergents and metal ions had varied effects on the enzyme activity. Importantly, PLD₆₂₈ could not catalyze transphosphatidylation of glycerol, L-serine, myo-inositol or ethanolamine, which are extensively used to assess the activity, suggesting that PLD₆₂₈ lacks the transphosphatidylation activity. PLD₆₂₈ could be a novel PLD based on its biochemical characteristics, which are significantly different from previously reported PLDs, such as thermolability, highest activity at alkaline pH, and lack of transphosphatidylation activity.     

Advantages of a two-step enzymatic process for cotton–polyester blends

Cotton fabric samples were treated with a formulation of a total crude Trichoderma reesei cellulase in a two-step procedure. In the first step, samples were treated at a low liquor ratio by padding through the enzyme formulation at 21°C and 55°C with a wet pickup of 100% and batched for 12 h. The samples were then treated at a high liquor ratio (1:25) with an identical enzyme formulation at 55°C, with intensive agitation. The pre-treatment influenced the overall weight loss and rate of hydrolysis in samples, and the protein concentration in the liquor of the second step. The overall weight loss was 25–28% (w/w) in the two-step procedure compared to a weight loss of 22% (w/w) in the one-step batch hydrolysis.