Effect of a Pharmaceutical Cationic Exchange Resin on the Properties of Controlled Release Diphenhydramine Hydrochloride Matrices Using Methocel K4M or Ethocel 7cP as Matrix Formers

This work was aimed at evaluating the effect of a pharmaceutical cationic exchange resin (Amberlite IRP-69) on the properties of controlled release matrices using Methocel K4M (HPMC) or Ethocel 7cP (EC) as matrix formers. Diphenhydramine hydrochloride (DPH), which was cationic and water soluble, was chosen as a model drug. HPMC- and EC-based matrices with varying amounts (0–40%w/w) of resin incorporation were prepared by a direct compression. Matrix properties including diameter, thickness, hardness, friability, surface morphology and drug release were evaluated. The obtained matrices were comparable in diameter and thickness regardless of the amount of resin incorporation. Increasing the incorporated resin decreased the hardness of HPMC- and EC-based matrices, correlating with the degree of rupturing on the matrix surfaces. The friability of HPMC-based matrices increased with increasing the incorporated resin, corresponding to their decreased hardness. In contrast, the EC-based matrices showed no significant change in friability in spite of decreasing hardness. The incorporated resin differently influenced DPH release from HPMC- and EC-based matrices in deionized water. The resin further retarded DPH release from HPMC-based matrices due to the gelling property of HPMC and the ion exchange property of the resin. In contrast, the release from EC-based matrices initially increased because of the disintegrating property of the resin, but thereafter declined due to the complex formation between released drug and dispersed resin via the ion exchange process. The release in ionic solutions was also described. In conclusion, the incorporated resin could alter the release and physical properties of matrices.     

Meloxicam Taste-Masked Oral Disintegrating Tablet with Dissolution Enhanced by Ion Exchange Resins and Cyclodextrin

The purpose of this study was to develop taste-masked oral disintegrating tablets (ODTs) using the combination of ion exchange resin and cyclodextrin, to mask the bitter taste and enhance drug dissolution. Meloxicam (MX) was selected as a model drug with poor water solubility and a bitter taste. Formulations containing various forms of MX (free drug, MX-loaded resin or resinate, complexes of MX and 2-hydroxypropyl-β-cyclodextrin (HPβCD) or MX/HPβCD complexes, and a mixture of resinate and MX/HPβCD complexes) were made and tablets were prepared by direct compression. The ODTs were evaluated for weight variation, thickness, diameter, hardness, friability, disintegration time, wetting time, MX content, MX release, degree of bitter taste, and stability. The results showed that thickness, diameter, weight, and friability did not differ significantly for all of these formulations. The tablet hardness was approximately 3 kg/in.², and the friability was less than 1%. Tablets formulated with resinate and the mixture of resinate and MX/HPβCD complexes disintegrated rapidly within 60 s, which is the acceptable limit for ODTs. These results corresponded to the in vivo disintegration and wetting times. However, only tablets containing the mixture of resinate and MX/HPβCD complexes provided complete MX dissolution and successfully masked the bitter taste of MX. In addition, this tablet was stable at least 6 months. The results from this study suggest that the appropriate combination of ion exchange resin and cyclodextrin could be used in ODTs to mask the bitter taste of drug and enhance the dissolution of drugs that are weakly soluble in water.     

Atomic force microscopy study of the secretory granule lumen.

We have used an atomic force microscope to study the mechanical properties of the matrix found in the lumen of secretory granules isolated from mast cells. The matrices were insoluble and had an average height of 474 +/- 197 nm. The volume of these matrices increased reversibly about tenfold by decreasing the valency of the bathing external cation (La3+ < Ca2+ < Na+). The elastic (Young's) modulus was found to decrease by about 100-fold (4.3 MPa in La3+ to 37 kPa in Na+) upon a tenfold increase in the matrix volume. A swollen granule matrix had an elastic modulus similar to that of gelatin in water. The elastic modulus was inversely related to the change in the volume of the matrix, following a relationship similar to that predicted for the elasticity of weakly cross-linked polymers. Our results show that the matrix of these secretory granules have the mechanical properties of weak ion exchange resins, lending strong support to an ion exchange mechanism for the storage and release of cationic secretory products.     

Preparation and Evaluation of Differently Sulfonated Styrene–Divinylbenzene Cross-linked Copolymer Cationic Exchange Resins as Novel Carriers for Drug Delivery

The differently sulfonated styrene–divinylbenzene cross-linked copolymer cationic exchange resins were prepared by oil-in-water polymerization and varied degrees of sulfonation. Several characteristics of the obtained resins were evaluated, i.e., Fourier transform infrared spectra, the ion-exchange capacity, microscopic morphology, size, and swelling. The resin characteristics were altered in relation to the degree of sulfonation, proving that differently sulfonated resins could be prepared. The behavior of chlorpheniramine (CPM) loading and in vitro release in the USP simulated gastric (SGF) and intestinal fluids (SIF) of the obtained resins were also evaluated. The CPM loaded in the resinates (drug-loaded resins) increased with the increasing degree of sulfonic group and hence the drug binding site in the employed resins. The CPM release was lower from the resins with the higher degree of sulfonic group due to the increase in the diffusive path depth. The CPM release was obviously lower in SGF than SIF because CPM, a weak base drug, ionized to a greater extent in SGF and then preferred binding with rather than releasing from the resins. In conclusion, the differently sulfonated resins could be utilized as novel carriers for drug delivery.     

Development of Oral Flexible Tablet (OFT) Formulation for Pediatric and Geriatric Patients: a Novel Age-Appropriate Formulation Platform

Development of palatable formulations for pediatric and geriatric patients involves various challenges. However, an innovative development with beneficial characteristics of marketed formulations in a single formulation platform was attempted. The goal of this research was to develop solid oral flexible tablets (OFTs) as a platform for pediatrics and geriatrics as oral delivery is the most convenient and widely used mode of drug administration. For this purpose, a flexible tablet formulation using cetirizine hydrochloride as model stability labile class 1 and 3 drug as per the Biopharmaceutical Classification System was developed. Betadex, Eudragit E100, and polacrilex resin were evaluated as taste masking agents. Development work focused on excipient selection, formulation processing, characterization methods, stability, and palatability testing. Formulation with a cetirizine-to-polacrilex ratio of 1:2 to 1:3 showed robust physical strength with friability of 0.1% (w/w), rapid in vitro dispersion within 30 s in 2–6 ml of water, and 0.2% of total organic and elemental impurities. Polacrilex resin formulation shows immediate drug release within 30 min in gastric media, better taste masking, and acceptable stability. Hence, it is concluded that ion exchange resins can be appropriately used to develop taste-masked, rapidly dispersible, and stable tablet formulations with tailored drug release suitable for pediatrics and geriatrics. Flexible formulations can be consumed as swallowable, orally disintegrating, chewable, and as dispersible tablets. Flexibility in dose administration would improve compliance in pediatrics and geriatrics. This drug development approach using ion exchange resins can be a platform for formulating solid oral flexible drug products with low to medium doses.     

Once-daily sustained-release matrix tablets of nicorandil: Formulation and in vitro evaluation

The objective of the present study was to develop once-daily sustained-release matrix tablets of nicorandil, a novel potassium channel opener used in cardiovascular diseases. The tablets were prepared by the wet granulation method. Ethanolic solutions of ethylcellulose (EC), Eudragit RL-100, Eudragit RS-100, and polyvinylpyrrolidone were used as granulating agents along with hydrophilic matrix materials like hydroxypropyl methylcellulose (HPMC), sodium carboxymethylcellulose, and sodium alginate. The granules were evaluated for angle of repose, bulk density, compressibility index, total porosity, and drug content. The tablets were subjected to thickness, diameter, weight variation test, drug content, hardness, friability, and in vitro release studies. The granules showed satisfactory flow properties, compressibility, and drug content. All the tablet formulations showed acceptable pharmacotechnical properties and complied with in-house specifications for tested parameters. According to the theoretical release profile calculation, a oncedaily sustained-release formulation should release 5.92 mg of nicorandil in 1 hour, like conventional tablets, and 3.21 mg per hour up to 24 hours. The results of dissolution studies indicated that formulation F-I (drug-to-HPMC, 1∶4; ethanol as granulating agent) could extend the drug release up to 24 hours. In the further formulation development process, F-IX (drug-to-HPMC, 1∶4; EC 4% wt/vol as granulating agent), the most successful formulation of the study, exhibited satisfactory drug release in the initial hours, and the total release pattern was very close to the theoretical release profile. All the formulations (except F-IX) exhibited diffusion-dominated drug release. The mechanism of drug release from F-IX was diffusion coupled with erosion.     

Hydrolysis of methyloleate using immobilized lipase from Chromobacterium viscosum

Various lipases were screened for their hydrolytic efficiency towards methyloleate. Lipase from Chromobacterium viscosum gave highest hydrolysis efficiency of 92% in 24?h. Different cation exchange resins were screened to immobilize lipase from Chromobacterium viscosum. A weakly acidic macroreticular type resin, IRC-50 having carboxyl end group functionality gave highest activity yield of 18.8%. Strongly acidic cation exchange resins with sulphonic functionality and macroreticular type did not give much activity yield when compared to weakly acidic non macroreticular type resins. It was observed that end group functionality and structure of the matrices plays an important role in obtaining highest activity yield. For a specific water concentration, the hydrolysis ratio reached 85% in less than 7?h when the substrate to enzyme ratio was 4. As the ratio is increased above 4, the availability of water at the interface has become a limitation for obtaining maximum hydrolysis.     

Effect of potassium chloride and cationic drug on swelling, erosion and release from kappa-carrageenan matrices

The basic objective of this work was to study the effect of model cationic drug metformin HCl on swelling and erosion and, in turn, the release of KCl and drug itself, from the kappa-carrageenan matrices. Water uptake by the matrix up to 2 hours was found to increase with KCl concentration from the plain matrix. Erosion was not affected by concentration of KCl. Incorporation of drug favors water uptake, but in presence of KCl it was found to be reduced. Drug-containing matrices have shown higher release of KCl as compared with plain batches. Drug release was retarded as KCl concentration increased up to 5%, above which the reduced cohesivity of the matrix caused increase in drug release.     

Terminalia Gum as a Directly Compressible Excipient for Controlled Drug Delivery

The exudates from the incised trunk of Terminalia randii has been evaluated as controlled release excipient in comparison with xanthan gum and hydroxypropylmethylcellulose (HPMC) using carvedilol (water insoluble) and theophylline (water soluble) as model drugs. Matrix tablets were prepared by direct compression and the effects of polymer concentration and excipients—spray dried lactose, microcrystalline cellulose and dicalcium phosphate dihydrate on the mechanical (crushing strength (CS) friability (F) and crushing strength–friability ratio (CSFR)) and drug release properties of the matrix tablets were evaluated. The drug release data were fitted into different release kinetics equations to determine the drug release mechanism(s) from the matrix tablets. The results showed that the CS and CSFR increased with increase in polymer concentration while F decreased. The ranking of CS and CSFR was HPMC > terminalia > xanthan while the ranking was reverse for F. The ranking for t ₂₅ (i.e. time for 25% drug release) at a polymer concentration of 60% was xanthan > terminalia = HPMC. The dissolution time, t ₂₅, of theophylline matrices was significantly lower (p < 0.001) than those of carvedilol matrix tablets. Drug release from the matrices was by swelling, diffusion and erosion. The mechanical and drug release properties of the tablets were significantly (p < 0.05) dependent on the type and concentration of polymer and excipients used with the release mechanisms varying from Fickian to anomalous. Terminalia gum compared favourably with standard polymers when used in controlled release matrices and could serve as a suitable alternative to the standard polymers in drug delivery.     

A Design and Evaluation of Layered Matrix Tablet Formulations of Metoprolol Tartrate

The aim of this paper was to evaluate the performance of different swellable polymers in the form of layered matrix tablets to provide controlled therapeutic effect of metoprolol tartrate for twice daily administration. Seven different swellable polymers (carrageenan, hydroxypropylmethyl cellulose, pectin, guar gum, xanthan gum, chitosan, and ethyl cellulose) were evaluated alone or in combination as release-retardant layer. Tablets were tested for weight variation, hardness, diameter/thickness ratio, friability, and drug content uniformity and subjected to in vitro drug-release studies. In addition, the target-release profile of metoprolol tartrate was plotted using its clinical pharmacokinetic data, and the release profiles of the tablets were evaluated in relation to the plotted target release profile. Carrageenan was determined as the best polymer in two-layered matrix tablet formulations due to its better accordance to the target release profile and was selected for preparing three-layered matrix tablets. Carrageenan formulations exhibited super case II release mechanism. Accelerated stability testing was performed on two- and three-layered matrix tablet formulations of carrageenan. The tablets were stored at 25°C/60% relative humidity and 40°C/75% relative humidity for 6 months and examined for physical appearance, drug content, and release characteristics. At the end of the storage time, formulations showed no change either in physical appearance, drug content, or drug-release profile. These results demonstrated the suitability of three-layered tablet formulation of carrageenan to provide controlled release and improved linearity for metoprolol tartrate in comparison to two-layered tablet formulation.     

Effect of polysulfonate resins and direct compression fillers on multiple-unit sustained-release dextromethorphan resinate tablets

The purpose of this work was to investigate the effect of different polysulfonate resins and direct compression fillers on physical properties of multiple-unit sustained-release dextromethorphan (DMP) tablets. DMP resinates were formed by a complexation of DMP and strong cation exchange resins, Dowex 50 W and Amberlite IRP69. The tablets consisted of the DMP resinates and direct compression fillers, such as microcrystalline cellulose (MCC), dicalcium phosphate dihydrate (DCP), and spray-dried rice starch (SDRS). Physical properties of tablets, such as hardness, disintegration time, and in vitro release, were investigated. A good performance of the tablets was obtained when MCC or SDRS was used. The use of rod-like and plate-like particles of Amberlite IRP69 caused a statistical decrease in tablet hardness, whereas good tablet hardness was obtained when spherical particle of Dowex 50 W was used. The plastic deformation of the fillers, such as MCC and SDRS, caused a little change in the release of DMP. A higher release rate constant was found in the tablets containing DCP and Dowex 50 W, indicating the fracture of the resinates under compression, which was attributable to the fragmentation of DCP. However, the release of DMP from the tablets using Amberlite IRP69 was not significantly changed because of the higher degree of cross-linking of the resinates, which exhibited more resistance to deformation under compression. In conclusion, the properties of polysulfonate resin, such as particle shape and degree of cross-linking, and the deformation under compaction of fillers affect the physical properties and the drug release of the resinate tablets. Published: September 30, 2005.     

Taste Mask, Design and Evaluation of an Oral Formulation Using Ion Exchange Resin as Drug Carrier

The purpose of this research was to mask the bitter taste of Diphenhydramine Hydrochloride (DPH) using cation exchange resins. Indion 234 and Tulsion 343 that contained crosslinked polyacrylic backbone were used. The drug resin complexes (DRC) were prepared by batch process by taking drug: resin ratios 1:1, 1:2, and 1:3. The optimum drug: resin ratio and the time required for maximum complexation was determined. The drug resinates were evaluated for the drug content, taste, micromeritic properties drug release and X-ray diffraction (PXRD). Effervescent and dispersible tablets were developed from optimum drug: resin ratios of 1:2 and 1:1. The formulations were evaluated for uniformity of dispersion, disintegration time, and in vitro dissolution. The X-ray diffraction study confirmed the monomolecularity of entrapped drug in the resin beads. The taste evaluation depicted the successful taste masking of DPH with drug resin complexes. The drug release of 95% in 15 min was observed for effervescent and dispersible tablets.     

Effect of potassium chloride and cationic drug on swelling,erosion and release from κ-carrageenan matrices

The basic objective of this work was to study the effect of model cationic drug metformin HCl on swelling and erosion and, in turn, the release of KCl and drug itself, from the κ-carrageenan matrices. Water uptake by the matrix up to 2 hours was found to increase with KCl concentration from the plain matrix. Erosion was not affected by concentration of KCl. Incorporation of drug favors water uptake, but in presence of KCl it was found to be reduced. Drugcontaining matrices have shown higher release of KCl as compared with plain batches. Drug release was retarded as KCl concentration increased up to 5%, above which the reduced cohesivity of the matrix caused increase in drug release.     

Formulation of controlled-release baclofen matrix tablets: Influence of some hydrophilic polymers on the release rate and in vitro evaluation

This work aims at investigating different types and levels of hydrophilic matrixing agents, including methylcellulose (MC), sodium alginate (Alg), and sodium carboxymethylcellulose (CMC), in an attempt to formulate controlled-release matrix tablets containing 25 mg baclofen. The tablets were prepared by wet granulation. Prior to compression, the prepared granules were evaluated for flow and compression characteristics. In vitro, newly formulated controlled-release tablets were compared with standard commercial tablets (Lioresal and baclofen). The excipients used in this study did not alter physicochemical properties of the drug, as tested by the thermal analysis using differential scanning calorimetry. The flow and compression characteristics of the prepared granules significantly improved by virtue of granulation process. Also, the prepared matrix tablets showed good mechanical properties (hardness and friability). MC- and Alg-based tablet formulations showed high release-retarding efficiency, and good reproducibility and stability of the drug release profiles when stored for 6 months in ambient room conditions, suggesting that MC and Alg are good candidates for preparing modified-release baclofen tablet formulations.     

D301树脂固定化假丝酵母脂肪酶

本研究选择7种吸附和离子交换树脂进行了假丝酵母脂肪酶(Candida sp.lipase)的固定化试验,通过测定固定化后各脂肪酶的酶活,筛选出固定化效果较好的弱碱性阴离子交换树脂D301;并通过扫描电镜将D301与脂肪酶Novozym 435的表面形貌做比较,进一步选定D301树脂作为载体,并对其采用戊二醛交联固定化,研究并优化了其固定化条件。结果表明,5%戊二醛溶液的加入量为8mL,处理时间为5h,酶液浓度为1.0g/L,磷酸缓冲盐溶液pH6.0,固定化处理10h效果最好,获得的固定化酶活力可达35U/mg,酶的固定化效率约为3.5U/(mg·h)。     

The molecular basis for the storage and release of histamine in rat mast cell granules

The proposal that mast cell histamine is stored in a histamine-heparin or histamine-zinc-heparin complex is criticised. In the first place, both heparin and zinc are present in amounts sufficient to bind only a minor part of the histamine stored. Secondly, it is evident from titration studies on the granules that the ester sulphate groups of heparin, which are essential for the binding of histamine, are already occupied since they are involved in the binding between heparin and basic protein in the complex that forms the matrix of the basophil granules. This protein-heparin complex is the histamine-binding material. It has the properties of a weak cation exchange resin, that binds organic and inorganic cations unselectively. Histamine release from mast cells is a simple cationic exchange between histamine and inorganic cations (mainly sodium) which takes place in granules which become exposed to the extracellular medium during the exocytotic process. The possibility that other release processes are also based on ionic exchange is briefly discussed.     

Evaluation of Vickers hardness of different types of acrylic denture base resins with and without glass fibre reinforcement

doi: 10.1111/j.1741‐2358.2010.00435.x
Evaluation of Vickers hardness of different types of acrylic denture base resins with and without glass fibre reinforcement Objective: To evaluate the Vickers hardness of different acrylic resins for denture bases with and without the addition of glass fibres. Background: It has been suggested that different polymerisation methods, as well as the addition of glass fibre (FV) might improve the hardness of acrylic. Materials and methods: Five types of acrylic resin were tested: Vipi Wave (VW), microwave polymerisation; Vipi Flash (VF), auto‐polymerisation; Lucitone (LT), QC20 (QC) and Vipi Cril (VC), conventional heat‐polymerisation, all with or without glass fibre reinforcement (GFR) and distributed into 10 groups (n = 12). Specimens were then submitted to Vickers hardness testing with a 25‐g load for 30 s. All data were submitted to anova and Tukey’s HSD test. Results: A significant statistical difference was observed with regard to the polymerisation method and the GFR (p < 0.05). Without the GFR, the acrylic resin VC presented the highest hardness values, and VF and LT presented the lowest. In the presence of GFR, VC resin still presented the highest Vickers hardness values, and VF and QC presented the lowest. Conclusions: The acrylic resin VC and VW presented higher hardness values than VF and QC resins. Moreover, GFR increased the Vickers hardness of resins VW, VC and LT.     

Effect of microenvironment pH of swellable and erodable buffered matrices on the release characteristics of diclofenac sodium

The aim of this work is to design pH-dependent swellable and erodable-buffered matrices and to study the effect of the microenvironment pH on the release pattern of diclofenac sodium. Buffered matrix tablets containing diclofenac sodium, physically mixed with hydrophilic polymer (hydroxypropyl methylcellulose [HPMC]) and pH-dependent solubility polymer (Eudragit L100-55) were prepared with different microenvironment pHs. The release of diclofenac sodium from the buffer matrices was studied in phosphate buffer solutions of pH 5.9 and 7.4. The swelling and erosion matrices containing only HPMC and Eudragit L100-55 were studied in phosphate buffer solution of pH similar to the microenvironment pHs of the matrices. Drug release from matrices was found to be linear as a function of time. Amount of drug released was found to be higher in the medium of pH 7.4 than that of pH 5.9. The rate of drug release increased with the increase of the microenvironment pH of the matrices as determined from the slope. The pattern of drug release did not change with the change of microenvironment pH. The swelling and erosion occurred simultaneously from matrices made up of HPMC and Eudragit L100-55. Both extent of swelling and erosion increased with increase of the medium pH. It was concluded from this study that changing the pH within the matrix influenced the rate of release of the drug without affecting the release pattern. Fax: Not Forwarded     

Proniosomal Oral Tablets for Controlled Delivery and Enhanced Pharmacokinetic Properties of Acemetacin

Free-flowing proniosomal powders of acemetacin (AC) were prepared using the slurry method and maltodextrin as carrier. Positively charged proniosomes composed of 70:20:10 of Span 60/cholesterol (Chol)/stearylamine (SA), respectively, were successively compressed into tablets using direct compression method. The tablets were characterized for weight variability, friability, hardness, drug content uniformity, and dissolution properties. The in vivo evaluation of the prepared proniosomes (powder or tablet forms) after oral administration was investigated by the determination of AC and its active metabolite indomethacin (IND) in the blood of albino rabbits. Results indicated that the increase of Chol from 10% to 20% markedly reduced the efflux of the drug. Further Chol addition from 30% to 50% led to increased AC release rates. The proniosome tablets of AC showed greater hardness and disintegration time and less friability than AC plain tablets. The dissolution of proniosomal tablets indicated a lower drug release percentage compared to powdered proniosomes and AC plain tablets. The mean pharmacokinetic parameters of AC and IND from different formulations indicated increased t_1/2 and area under the curve (AUC) of both AC and IND for proniosomal tablets compared with both proniosomal powders and AC plain tablets. This study suggested the formulation of AC proniosomal powder into tablets to control and extend its pharmacologic effects.KEY WORDS: acemetacin, proniosomes, sustained-release tablet, pharmacokinetics     

Artifact-inducing enrichment of ethylenediaminetetraacetic acid and ethyleneglycoltetraacetic acid on anion exchange resins

Multivalent metal chelators, ethylenediaminetetraacetic acid (EDTA) and ethyleneglycoltetraacetic acid (EGTA), are used extensively during protein purification. Both strong (Q) and weak (DEAE) anion exchange resins were found to adsorb surprisingly large quantities of EDTA and EGTA that elute from the resin at NaCl concentrations of approximately 240 mM (EDTA) and 140 mM (EGTA). The EDTA/EGTA elution and saturation parameters were determined for five commonly used anion exchange resins. The resulting concentration of eluted EDTA was 10- to 200-fold higher than that originally present in the sample or in the mobile phase. Samples from fractions containing such a high concentration of EDTA were found to inhibit Mg²⁺-dependent polymerase chain reaction (PCR). EDTA binding to the anion exchange resins could saturate the resin, decrease its binding capacity, and displace weakly bound proteins such as green fluorescent protein (GFP). Several steps are suggested to minimize on-column EDTA concentration, including column equilibration in the absence of any EDTA, lower concentrations (0.1–0.5 mM) of EDTA, monitoring eluate absorbance at 280 nm as well as at 215 nm, adding EDTA back into fractions eluting before the EDTA peak, and performing blank column runs to control for the effect of changes in EDTA concentration in downstream assays.