Multifunctional TENG for Blue Energy Scavenging and Self‐Powered Wind‐Speed Sensor

Triboelectric nanogenerator (TENG) has been considered to be a more effective technology to harvest various types of mechanic vibration energies such as wind energy, water energy in the blue energy, and so on. Considering the vast energy from the blue oceans, harvesting of the water energy has attracted huge attention. There are two major types of “mechanical” water energy, water wave energy in random direction and water flow kinetic energy. However, although the most reported TENG can be used to efficiently harvest one type of water energy, to simultaneously collect two or more types of such energy still remains challenging. In this work, two different freestanding, multifunctional TENGs are successfully developed that can be used to harvest three types of energies including water waves, air flowing, and water flowing. These two new TENGs designed in accordance with the same freestanding model yield the output voltages of 490 and ≈100 V with short circuit currents of 24 and 2.7 µA, respectively, when operated at a rotation frequency of 200 rpm and the movement frequency of 3 Hz. Moreover, the developed multifunctional TENG can also be explored as a self‐powered speed sensor of wind by correlating the short‐circuit current with the wind speed.     

Robust Thin Films‐Based Triboelectric Nanogenerator Arrays for Harvesting Bidirectional Wind Energy

Wind‐driven triboelectric nanogenerators (TENGs) play an important role in harvesting energy from ambient environments. Compared to single‐side‐fixed triboelectric nanogenerator (STENG) arrays for harvesting single‐pathway wind energy, double‐side‐fixed triboelectric nanogenerator (DTENG) arrays are developed to harvest bidirectional wind energy. Electrical performances of the STENG and DTENG can be improved due to sticky, abrasive, and electrical properties of the Ti buffer layers among Al, polytetrafluoroethylene (PTFE), and polyimide (Kapton), configuring in triboelectric PTFE/Ti/Al and Al/Ti/Kapton/Ti/Al thin films. Short‐circuit current (I _SC), open‐circuit voltage (V _OC), and frequencies of the STENG and DTENG increase with increasing wind velocity ranging from 9.2 to 18.4 m s²¹, revealing that the moderate I _SC, V _OC, frequencies, and output powers of the STENG and DTENG reach 67 μA, 57 μA, 334 V, 296 V, 173 Hz, 162 Hz, 5.5 mW and 3.4 mW with a matched load of 4 MΩ at airflow rate of 15.9 m s²¹, respectively. Compared with counterparts of the single‐pathway‐harvested STENG arrays, the I _SC, durability, and stability of the bidirectional‐harvested DTENG can be dramatically improved by a 4 3 1 array connected in parallel because of the improved device configuration, stickiness, and abrasion by adhering Ti buffer layers. The durable DTENG arrays present a step toward practical applications in harvesting bidirectional wind energy for self‐powered systems and wireless sensors.     

Microdischarge‐Based Direct Current Triboelectric Nanogenerator via Accumulation of Triboelectric Charge in Atmospheric Condition

Direct conversion of mechanical energy into direct current (DC) by triboelectric nanogenerators (TENGs) is one of the desired features in terms of energy conversion efficiency. Although promising applications have been reported using the triboelectric effect, effective DC generating TENGs must be developed for practical purposes. Here, it is reported that continuous DC generation within a TENG itself, without any circuitry, can be achieved by triggering air breakdown via triboelectrification. It is demonstrated that DC generation occurs in combination with i) charge accumulation to generate air breakdown, ii) incident discharge (microdischarge), and iii) conveyance of charges to make the device sustainable. 10.5 mA m^?2 of output current and 10.6 W m^?2 of output power at 33 MΩ load resistance are achieved. Compared to the best DC generating TENGs ever reported, the TENG in this present study generates about 20 times larger root‐mean square current density.     

Robust Swing‐Structured Triboelectric Nanogenerator for Efficient Blue Energy Harvesting

Ocean wave energy is a promising renewable energy source, but harvesting such irregular, “random,” and mostly ultra‐low frequency energies is rather challenging due to technological limitations. Triboelectric nanogenerators (TENGs) provide a potential efficient technology for scavenging ocean wave energy. Here, a robust swing‐structured triboelectric nanogenerator (SS‐TENG) with high energy conversion efficiency for ultra‐low frequency water wave energy harvesting is reported. The swing structure inside the cylindrical TENG greatly elongates its operation time, accompanied with multiplied output frequency. The design of the air gap and flexible dielectric brushes enable mininized frictional resistance and sustainable triboelectric charges, leading to enhanced robustness and durability. The TENG performance is controlled by external triggering conditions, with a long swing time of 88 s and a high energy conversion efficiency, as well as undiminished performance after continuous triggering for 4 00 000 cycles. Furthermore, the SS‐TENG is demonstrated to effectively harvest water wave energy. Portable electronic devices are successfully powered for self‐powered sensing and environment monitoring. Due to the excellent performance of the distinctive mechanism and structure, the SS‐TENG in this work provides a good candidate for harvesting blue energy on a large scale.     

Charge Pumping Strategy for Rotation and Sliding Type Triboelectric Nanogenerators

Triboelectric nanogenerator (TENG) is an emerging approach for harvesting energy from the living environment. But its performance is limited by the maximum density of surface charges created by contact electrification. Here, by rationally designing a synchronous rotation structure, a charge pumping strategy is realized for the first time in a rotary sliding TENGs, which is demonstrated to enhance the charge density by a factor of 9, setting up a record for rotary TENGs. The average power is boosted by more than 15 times compared with normal TENGs, achieving an ultrahigh average power density of 1.66 kW m^?3, under a low drive frequency of 2 Hz. Moreover, the charge pumping mechanism enables decoupling of bound charge generation and the severity of interfacial friction in the main TENG, allowing surface lubricants to be applied for suppressing abrasion and lowering heat generation. The adaptability of the strategy to rotation and sliding type TENGs in low‐frequency agitations provides a breakthrough to the bottleneck of power output for mechanical energy harvesting, and should have a great impact on high‐power TENG design and practical applications in various fields.     

Multilayered‐Electrode‐Based Triboelectric Nanogenerators with Managed Output Voltage and Multifold Enhanced Charge Transport

The open‐circuit voltage of a triboelectric nanogenerator (TENG) increases with the tribo‐charge density and the separated distance between two tribo‐surfaces, which can reach several thousand volts and is much higher than the working voltage required by most electrical devices and energy storage units. Therefore, improving the effective efficiency of TENGs requires reducing the output voltage and enhancing the transferred charges. Here, a multilayered‐electrode‐based TENG (ME‐TENG) is developed in which the output voltage can be managed by controlling the charge flow in a process of multiple (N) steps, which results in N times lower voltage but N times higher total charge transport. The ME‐TENG is demonstrated to work in various modes, including multichannel, single‐channel, and double‐tribo‐surface structures. The effects of insulator layer thickness and total layer number on the output voltage are simulated by the finite element method. The output voltage can be modulated from 14 to 102 V by changing the insulator layer number between two adjacent working electrodes, based on which the 8‐bit logic representations of the characters in the ACSII code table are demonstrated. The ME‐TENG provides a novel method to manage the output power and has potential applications in self‐powered sensors array and human–machine interfacing with logic communications.     

High Permittivity CaCu3Ti4O12 Particle‐Induced Internal Polarization Amplification for High Performance Triboelectric Nanogenerators

Here, a composite material based on the butylated melamine formaldehyde (BMF) and high permittivity CaCu₃Ti₄O₁₂ (CCTO) particles as a triboelectric dielectric material for stable high output triboelectric nanogenerators (TENGs) is proposed. CCTO particles, which have the high permittivity of 7500, can potentially result in the formation of strong internal polarization into the dielectric material under the electric field from triboelectric charges. As a consequence, the charge induction on the bottom electrode is enhanced thereby increasing the triboelectric output performance. A rotation‐type freestanding mode TENG based on BMF–CCTO 1 wt% composite material demonstrates high performance power output of a root‐mean‐square voltage and current density with 268 V and 25.8 mA m^?2, respectively. The strategy of incorporating the high permittivity CCTO particles can be universally applied to any triboelectric polymer matrix in order to enhance the output performance of TENGs.     

Robust Triboelectric Nanogenerator Achieved by Centrifugal Force Induced Automatic Working Mode Transition

Material abrasion in contact‐based freestanding mode‐triboelectric nanogenerators (FS‐TENGs) seriously deteriorates device mechanical durability and electrical stability, which causes TENGs to be only applicable in the harvesting of mechanical energy at low‐frequency. Here, a wide‐frequency and ultra‐robust rotational TENG is reported that is composed of a built‐in traction rope structure and capable of transforming from contact mode to non‐contact mode automatically as driven by the centrifugal force. With optimizing the fixed x and y position on slider and center shaft, respectively, the mode transition threshold speed can be reduced to 225 rpm. Additionally, the automatic working mode transition TENG exhibits excellent electrical stability, which can maintain 90% electric output after over 24 h of continuous operation, while the contact and non‐contact mode TENGs only retain 30% and 2% output, respectively. The high stability and large output density ensure its usage in the fast and effective charging of commercial capacitors or electronics. This work provides a prospective strategy for rotational TENGs to extend the frequency operation region and mechanical durability for practical applications.     

Networks of High Performance Triboelectric Nanogenerators Based on Liquid–Solid Interface Contact Electrification for Harvesting Low‐Frequency Blue Energy

Blue energy harvested from the ocean is an important and promising renewable energy for the sustainable development of society. Triboelectric nanogenerators (TENGs) are considered one of the most promising approaches for harvesting blue energy. In this work, a liquid–solid‐contact triboelectric nanogenerator (LS TENG) is fabricated to enhance the friction and magnify energy output by 48.7 times, when compared with the solid–solid‐contact TENG with the same area. The buoy‐like LS TENG can harvest energy from different types of low‐frequency vibration (including up–down, shaking, and rotation movements). Moreover, the outputs of the LS TENGs network can reach 290 µA, 16 725 nC, and 300 V, and the LS TENGs network can directly power hundreds of LEDs and drive a radio frequency emitter to form a self‐powered wireless save our souls (SOS) system for ocean emergencies. This work renders an innovative and effective approach toward large‐scale blue energy harvesting and applications.     

Environmentally Friendly Hydrogel‐Based Triboelectric Nanogenerators for Versatile Energy Harvesting and Self‐Powered Sensors

Triboelectric nanogenerators (TENGs), as a promising energy harvesting technology, have been rapidly developed in recent years. However, the research based on fully flexible and environmentally friendly TENGs is still limited. Herein, for the first time, a hydrogel‐based triboelectric nanogenerator (Hydrogel‐TENG) with high flexibility, recyclability, and environmental friendliness simultaneously has been demonstrated. The standard Hydrogel‐TENG can generate a maximum output power of 2 mW at a load resistance of 10 MΩ. The tube‐shaped Hydrogel‐TENG can harvest mechanical energy from various human motions, including bending, twisting, and stretching. Furthermore, the system can serve as self‐powered sensors to detect the human motions. Additionally, the utilized Polyvinyl Alcohol hydrogel employed in this study is recyclable to benefit for fabricating the renewable TENG. The open‐circuit voltage of renewed hydrogel‐TENG can reach up to 92% of the pristine output voltage. This research will pave a potential approach for the development of flexible energy sources and self‐powered motion sensors in environmentally friendly way.     

Triboelectric Nanogenerator Based on Fully Enclosed Rolling Spherical Structure for Harvesting Low‐Frequency Water Wave Energy

Water waves are increasingly regarded as a promising source for large‐scale energy applications. Triboelectric nanogenerators (TENGs) have been recognized as one of the most promising approaches for harvesting wave energy. This work examines a freestanding, fully enclosed TENG that encloses a rolling ball inside a rocking spherical shell. Through the optimization of materials and structural parameters, a spherical TENG of 6 cm in diameter actuated by water waves can provide a peak current of 1 μA over a wide load range from a short‐circuit condition to 10 GΩ, with an instantaneous output power of up to 10 mW. A multielectrode arrangement is also studied to improve the output of the TENG under random wave motions from all directions. Moreover, at a frequency of 1.43 Hz, the wave‐driven TENG can directly drive tens of LEDs and charge a series of supercapacitors to rated voltage within several hours. The stored energy can power an electronic thermometer for 20 min. This rolling‐structured TENG is extremely lightweight, has a simple structure, and is capable of rocking on or in water to harvest wave energy; it provides an innovative and effective approach toward large‐scale blue energy harvesting of oceans and lakes.     

Rationally Designed Dual‐Mode Triboelectric Nanogenerator for Harvesting Mechanical Energy by Both Electrostatic Induction and Dielectric Breakdown Effects

With the advantages of its light weight, low cost, and high efficiency especially at low operation frequency, the triboelectric nanogenerator (TENG) is considered to be a potential solution for self‐powered sensor networks and large‐scale renewable blue energy. However, the conventional TENG converts mechanical energy into electrical energy only via either electrostatic induction or electrostatic breakdown. Here, a novel dual‐mode TENG is presented, which can simultaneously harvest mechanical energy by electrostatic induction and dielectric breakdown in a single device. Based on the complementary working mechanism, it achieves a great improvement in the output performance with the sum of two TENGs via a single mechanism and reveals the effect of dielectric layer thickness on the triboelectrification, electrostatic induction, and air breakdown. This study establishes a new methodology to optimize TENGs and provides a new tool to investigate the triboelectrification, electrostatic induction and dielectric breakdown simultaneously.     

Mechanical Regulation Triboelectric Nanogenerator with Controllable Output Performance for Random Energy Harvesting

Recycling of random mechanical energy in the environment has become an important research hotspot. The triboelectric nanogenerators (TENGs) were invented to harvest energy, and have been widely applied due to their simple structure, small size, and low cost. This paper reports a mechanical regulation triboelectric nanogenerator (MR‐TENG) for the first time with controllable output performance used to harvest random or irregular energy in the environment. It comprises a transmission unit, switch structure, generator unit, flywheel, and shell. Random linear motion or rocking motion is transferred via the transmission unit to the flywheel. The rotor of the generator unit fixed on the flywheel and the stator of the generator unit fixed on the shell combine. By controlling the storage and release of energy in the flywheel, the switch structure assists the flywheel to convert random or irregular energy into a controllable and stable energy output. The MR‐TENG can generate an open‐circuit voltage of 350 V, a short‐circuit current of 12 μA, a transfer charge of 130 nC, and a peak power of 2.52 mW. Furthermore, a thermometer and more than 300 light emitting diodes (LEDs) are separately powered by this MR‐TENG in simulated water waves, demonstrating its potential application in water wave energy harvesting.     

Blue Energy Collection toward All‐Hours Self‐Powered Chemical Energy Conversion

The conversion and transmission of blue energy in the ocean are critical issues. By employing triboelectric nanogenerators (TENGs), blue energy can be harvested but the corresponding electricity transmission and storage are still great challenges. In this work, an automatic high‐efficiency self‐powered energy collection and conversion system is proposed that converts blue energy to chemical energy. A gear‐driven unidirectional acceleration TENG is designed to convert disordered and low‐frequency water wave energy to low voltage and high current DC output. The output bias from the TENG can be used to drive a Ti–Fe₂O₃/FeNiOOH based photoelectrochemical cell under sunlight to produce hydrogen. Moreover, under the situation without sunlight, the self‐powered system can be automatically switched to another working state to charge a Co₃O₄ based lithium‐ion battery. The hydrogen production rate reaches to 4.65 µL min^‐1 under sunlight at the rotation speed of 120 rpm. The conversion efficiency of the whole system is calculated to be 2.29%. The system triggered by photoswitches can automatically switch between two working states with or without sunlight and convert the blue energy to either hydrogen energy or battery energy for easy storage and transmission, which widens the future applications for blue energy.     

A Novel MXene/Ecoflex Nanocomposite-Coated Fabric as a Highly Negative and Stable Friction Layer for High-Output Triboelectric Nanogenerators

The triboelectric material properties and mechanical stability of the contact layer are vital to achieving durable triboelectric nanogenerators (TENGs) with high output performance. Herein, a novel MXene/Ecoflex nanocomposite is introduced as a promising triboelectric material because of its highly negative triboelectric properties and mechanical stability. The MXene/Ecoflex nanocomposite with a fabric-based waterproof TENG (FW-TENG) is fabricated and designed to universally harvest energy from various human motions as well as the natural environment (rain and wind). The fabricated FW-TENG delivers a maximum output peak power of 3.69 mW and a power density of 9.24 W m⁻², respectively, at a matching load resistance of 4.5 MΩ under a frequency of 4.5 Hz and a force of 8 N. Furthermore, the applicability of this device in various products is investigated. The FW-TENG can protect against a crash caused by rainy and humid weather. An FW-TENG-based self-powered smart active device that detects motion on a carpet is demonstrated and is equipped with sleep monitoring motion sensors. The FW-TENG not only has self-powered benefits and excellent mechanical amenability but is also exceptionally reliable and stable against water intrusion, which are important characteristics to realize next-generation wearable/portable technologies.     

A Universal Strategy for Improving the Energy Transmission Efficiency and Load Power of Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) have recently been invented as a potential energy technology for harvesting low‐frequency mechanical energy. The load power acquired from a TENG is far less than the maximum output power of the TENG for the large internal impedance and impedance mismatch, and this difference results in an extremely low energy transmission efficiency. Here, a universal strategy is proposed for improving the energy transmission efficiency and load power through dielectric material design, including a reduction in the effective thickness and the directional alignment of the electric dipole. This strategy reduces the internal impedances of TENGs with different modes and results in the improvement of energy transmission efficiency and load power. According to this strategy, the internal impedance of an as‐fabricated TENG is reduced from 16 to 1.3 MΩ, and the energy transmission efficiency is enhanced from 22.46% to 99.5%. Moreover, the load power under 1 MΩ resistance is improved from 0.014 to 0.251 µW, an increase of 18 times. The strategy not only opens a universal and new road to power management, but also paves the way for the industrial applications of TENGs.     

Energy Harvesting from Breeze Wind (0.7–6 m s−1) Using Ultra‐Stretchable Triboelectric Nanogenerator

Wind is one of the most important sources of green energy, but the current technology for harvesting wind energy is only effective when the wind speed is beyond 3.5–4.0 m s^?1. This is mainly due to the limitation that the electromagnetic generator works best at high frequency. This means that light breezes cannot reach the wind velocity threshold of current wind turbines. Here, a high‐performance triboelectric nanogenerator (TENG) for efficiently harvesting energy from an ambient gentle wind, especially for speeds below 3 m s^?1 is reported, by taking advantage of the relative high efficiency of TENGs at low‐frequency. Attributed to the multiplied‐frequency vibration of ultra‐stretchable and perforated electrodes, an average output of 20 mW m^?3 can be achieved with inlet wind speed of 0.7 m s^?1, while an average energy conversion efficiency of 7.8% at wind speed of 2.5 m s^?1 is reached. A self‐charging power package is developed and the applicability of the TENG in various light breezes is demonstrated. This work demonstrates the advantages of TENG technology for breeze energy exploitation and proposes an effective supplementary approach for current employed wind turbines and micro energy structure.     

Enhancing the Output Performance of Triboelectric Nanogenerator via Grating‐Electrode‐Enabled Surface Plasmon Excitation

The surface charge density and the output impedance of triboelectric nanogenerators (TENGs) are two critical factors for TENGs to speed up their commercialization, so it is important to explore unique methods to reduce the output impedance and increase the surface charge density. Here, an approach is demonstrated to effectively boost the output performance of TENG while reducing the output impedance of TENGs by utilizing grating‐electrode‐enabled surface plasmon excitation. A sustainable and enhanced output performance of about 40 µA (short‐circuit current) and 350 V (peak‐to‐peak voltage at a resistance of 10 MΩ) is produced via grating‐coupled surface plasmon resonance on the TENG with the aluminum grating electrode in the line density of 600 lines mm^?1, and it delivers a peak output power of 3.6 mW under a loading resistance of 1 MΩ, giving over 4.5‐fold enhancement in output power and a 75% reduction in the output impedance. Finally a self‐powered ultrasonic ranging system is utilized to verify the capability of the TENG in powering portable electrics.     

Multiple‐Frequency High‐Output Triboelectric Nanogenerator Based on a Water Balloon for All‐Weather Water Wave Energy Harvesting

Energy and the environment are two of the main issues facing the world today. As a consequence abundant renewable green energy sources such as wave energy, have become hot topics. Here, a multiple‐frequency triboelectric nanogenerator based on the water balloon (WB‐TENG) is proposed for harvesting water wave energy in any direction. Owing to the high elasticity of the water balloon, the WB‐TENG can realize a multiple‐frequency response to low‐frequency external mechanical simulations to generate high‐frequency electrical output. In addition, the water balloon can achieve self‐support without any additional supporting structure because of its tension, to make WB‐TENG still produce electrical output under slight vibration, which can also bring high energy conversion efficiency. Moreover, the fabricated WB‐TENG generates a maximum instantaneous short‐circuit current and an open‐circuit voltage of 147 µA and 1221 V, respectively. Most noteworthy, under the same conditions, the total transferred charge of WB‐TENG is 28 times than that of traditional TENG based on double plate structure during one working cycle. Therefore, this design can provide an effective way to promote the development of TENGs in blue energy.     

Long‐Lifetime Triboelectric Nanogenerator Operated in Conjunction Modes and Low Crest Factor

The high‐output triboelectric nanogenerator (TENG) is indispensable for its practical applications toward industrial products. However, the electricity loss in simple parallel connection among all units and the typically high crest factor output seriously hamper the practical applications of TENG. Here, a rectified TENG is reported in parallel structure to solve the problem of electricity loss in simple parallel connection. The rotational contact–separation structure with phase difference between rectified TENGs addresses high crest factor output and extends service life of rotational TENG simultaneously. The current crest factor is dramatically decreased to 1.31 in multiple rectifier multiple TENG in parallel (MRM‐TENG), while that of TENG in simple parallel is higher than 6. Meanwhile, the current output can retain up to ≈93% of its initial performance after 7 200 000 rotations under 2.00 r s^?1 of 1000 h. Furthermore, the equivalent current can be in linear growth with low crest factor by making MRM‐TENG in parallel for distributed energy supply without electricity loss. This work may provide a new strategy for TENG in parallel to achieve a low crest factor output and long‐term cycling stability power generation in distributed energy harvesting for large‐scale power application.