共查询到20条相似文献,搜索用时 46 毫秒
1.
Sivaraj Pazhaniswamy Sagar A. Joshi Haoqing Hou Abhilash Karuthedath Parameswaran Seema Agarwal 《Liver Transplantation》2023,13(1):2202981
A smooth interfacial contact between electrode and electrolyte, alleviation of dendrite formation, low internal resistance, and preparation of thin electrolyte (<20 µm) are the key challenging tasks in the practical application of Li7La3Zr2O12 (LLZO)-based solid-state batteries (SSBs). This paper develops a unique strategy to reduce interfacial resistance by designing an interface-based core–shell structure via direct integration of Al-LLZO ceramic nanofibers incorporated poly(vinylidene fluoride)/LiTFSI on the surface of a porous cathode electrode (HPEIC). This yields an ultrathin solid polymer electrolyte with a thickness of 7 µm. The integrated HPEIC/Li SSB with LiFePO4/C exhibits an initial specific capacity of 166 mAh g−1 at 0.1 C and 159 mAh g−1 with capacity retention of 100% after 120 cycles at 0.5 C (25 °C). The HPEIC/Li SSB with LiNi0.8Mn0.1Co0.1O2 cathode delivers a good discharge capacity of 134 mAh g−1 after 120 cycles at 0.5 C. The rational design of interface-based core–shell structure outperforms the conventional assembly of solid-state cells using free-standing solid electrolytes in specific capacity, internal resistance, and rate performance. The proposed strategy is simple, cost-effective, robust, and scalable manufacturing, which is essential for the practical applicability of SSBs. 相似文献
2.
Jiahui Zhang Siyuan Li Xinyang Wang Shulan Mao Junze Guo Zeyu Shen Jiale Mao Qian Wu Kang Shen Hao Cheng Yuanzhong Tan Yingying Lu 《Liver Transplantation》2024,14(5):2302587
Polyethylene oxide (PEO)-based solid polymer electrolytes (SPE) have garnered recognition as highly promising candidates for advanced lithium-metal batteries. However, the practical application of PEO-based SPE is hindered by its low critical current density (CCD) resulting from undesired dendrite growth. In this study, a PEO-based SPE that exhibits an ultra-high CCD (4 mA cm−2) is presented and enhanced lithium ionic conductivity through the incorporation of small amounts of P2S5 (PS). The crystalline Li2O-rich and P/S-containing solid electrolyte interphase (SEI) is revealed by cryo-electron microscope (cryo-EM) and Time of flight secondary ion mass spectrometry (TOF-SIMS), which inhibits dendrite growth and adverse reactions between SPE and reductive lithium, thus offering a spherical growth behavior for dendrite-free lithium metal anode. Consequently, utilizing the PS-integrated SPE, a Li-Li symmetric cell demonstrates reduced resistance during operation, enabling stable cycles exceeding 200 hours at 0.5 mA cm−2 and 0.5 mAh cm−2, a stringent test condition for PEO-based electrolytes. Moreover, a Li/SPE/LiFePO4 (LFP) pouch cell exhibits 80% capacity retention after 100 cycles with 50 µm Li and 30 µm PEO electrolyte, showcasing its potential for practical applications. 相似文献
3.
Andrea Paolella Wen Zhu Gui‐Liang Xu Andrea La Monaca Sylvio Savoie Gabriel Girard Ashok Vijh Hendrix Demers Alexis Perea Nicolas Delaporte Abdelbast Guerfi Xiang Liu Yang Ren Cheng‐Jun Sun Jun Lu Khalil Amine Karim Zaghib 《Liver Transplantation》2020,10(32)
The thickness of solid‐state electrolytes (SSEs) significantly affects the energy density and safety performance of all‐solid‐state lithium batteries. However, a sufficient understanding of the reactivity toward lithium metal of ultrathin SSEs (<100 µm) based on NASICON remains lacking. Herein, for the first time, a self‐standing and ultrathin (70 µm) NASICON‐type Li1.5Al0.5Ge1.5(PO4)3 (LAGP) electrolyte via a scalable solution process is developed, and X‐ray photoelectron spectroscopy reveals that changes in LAGP at the metastable Li–LAGP interface during battery operation is temperature dependent. Severe germanium reduction and decrease in LAGP particle size are detected at the Li–LAGP interface at elevated temperature. Oriented plating of lithium metal on its preferred (110) face occurs during in situ X‐ray diffraction cycling. 相似文献
4.
Tianhui Xu Peng Gao Peirong Li Kai Xia Na Han Jun Deng Yanguang Li Jun Lu 《Liver Transplantation》2020,10(8)
Li metal anodes are going through a great revival but they still encounter grand challenges. One often neglected issue is that most reported Li metal anodes are only cyclable under relatively low current density (<5 mA cm?2) and small areal capacity (<5 mAh cm?2), which essentially limits their high‐power applications and results in ineffective Li utilization (<1%). Herein, it is reported that surface alloyed Li metal anodes can enable reversible cycling with ultrafast rate and ultralarge areal capacity. Low‐cost Si wafers are used and are chemically etched down to 20–30 µm membranes. Simply laminating a Si membrane onto Li foil results in the formation of LixSi alloy film fused onto Li metal with mechanical robustness and high Li‐ion conductivity. Symmetric cell measurements show that the surface alloyed Li anode has excellent cycling stability, even under high current density up to 25 mA cm?2 and unprecedented areal capacity up to 100 mAh cm?2. Furthermore, the surface alloyed Li anode is paired with amorphous MoS3 cathode and achieves remarkable full‐cell performance. 相似文献
5.
Vikalp Raj Kaustubh G. Naik Bairav S. Vishnugopi Ajeet Kumar Rana Andrew Scott Manning Smruti Rekha Mahapatra KR Varun Vipin Singh Abhineet Nigam Josefine D. McBrayer Partha P. Mukherjee Naga Phani B. Aetukuri David Mitlin 《Liver Transplantation》2024,14(15):2303062
This study illustrates how the microstructure of garnet solid-state electrolytes (SSE) affects the stress-state and dendrite growth. Tantalum-doped lithium lanthanum zirconium oxide (LLZTO, Li6.4La3Zr1.4Ta0.6O12) is synthesized by powder processing and sintering (AS), or with the incorporation of intermediate-stage high-energy milling (M). The M compact displays higher density (91.5% vs 82.5% of theoretical), and per quantitative stereology, lower average grain size (5.4 ± 2.6 vs 21.3 ± 11.1 µm) and lower AFM-derived RMS surface roughness contacting the Li metal (45 vs 161 nm). These differences enable symmetric M cells to electrochemically cycle at constant capacity (0.1 mAh cm−2) with enhanced critical current density (CCD) of 1.4 versus 0.3 mA cm−2. It is demonstrated that LLZTO grain size distribution and internal porosity critically affect electrical short-circuit failure, indicating the importance of electronic properties. Lithium dendrites propagate intergranularly through regions where LLZTO grains are smaller than the bulk average (7.4 ± 3.8 µm for AS in a symmetric cell, 3.1 ± 1.4 µm for M in a half-cell). Metal also accumulates in the otherwise empty pores of the sintered compact present along the dendrite path. Mechanistic modeling indicates that reaction and stress heterogeneities are interrelated, leading to current focusing and preferential plating at grain boundaries. 相似文献
6.
He Liu Xin‐Bing Cheng Rui Xu Xue‐Qiang Zhang Chong Yan Jia‐Qi Huang Qiang Zhang 《Liver Transplantation》2019,9(44)
Lithium (Li) metal anodes exhibits the potential to enable rechargeable Li batteries with a high energy density. However, the irreversible plating and stripping behaviors of Li metal anodes with high reactivity and dendrite growth when matching different cathodes in working cells are not fully understood yet. Herein the working manner of very thin Li metal anodes (50 µm, 10 mAh cm?2) is probed with different sequences of Li plating and stripping at 3.0 mA cm?2 and 3.0 mAh cm?2. Dendrite growth and dead Li forms on the surface of the initially plated Li electrode (P‐Li), while Li dendrites form in the pit of the initially stripped Li electrode (S‐Li). This induces the differences in reactive sites, distribution of dead Li, and voltage polarization of Li metal anodes. There is a gap of 15–20 and 13–16 mV for the end voltages between S‐Li and P‐Li during stripping and plating, respectively. When matching LiFePO4 and FePO4 cathodes, P‐Li | LiFePO4 cells exhibit a 30‐cycle longer lifespan with smaller end polarization due to differences in the sequences of Li plating and stripping. This contribution affords emerging working principles for actual Li metal anodes when matching lithium‐containing and lithium‐free cathodes. 相似文献
7.
The high‐polarity β‐phase poly(vinylidene difluoride) (β‐PVDF), which has all trans conformation with F and H atoms located on the opposite sides of the polymer backbone, is demonstrated to be a promising artificial solid‐electrolyte interphase coating on both Cu and Li metal anodes for dendrite‐free Li deposition/stripping and enhanced cycling performance. A thin (≈4 µm) β‐PVDF coating on Cu enables uniform Li deposition/stripping at high current densities up to 5 mA cm?2, Li‐plating capacity loadings of up to 4 mAh cm?2, and excellent cycling stability over hundreds of cycles under practical conditions (1 mA cm?2 with 2 mAh cm?2). Full cells containing an LiFePO4 cathode and an anode of either β‐PVDF coated Cu or Li also exhibit excellent cycling stability. The profound effects of the high‐polarity PVDF coating on dendrite suppression are attributed to the electronegative F‐rich interface that favors layer‐by‐layer Li deposition. This study offers a new strategy for the development of dendrite‐free metal anode technology. 相似文献
8.
Wei Liu Yiteng Luo Yuhang Hu Zidong Chen Qiang Wang Yungui Chen Naseem Iqbal David Mitlin 《Liver Transplantation》2024,14(5):2302261
The interrelation is explored between external pressure (0.1, 1, and 10 MPa), solid electrolyte interphase (SEI) structure/morphology, and lithium metal plating/stripping behavior. To simulate anode-free lithium metal batteries (AF-LMBs) analysis is performed on “empty” Cu current collectors in standard carbonate electrolyte. Lower pressure promotes organic-rich SEI and macroscopically heterogeneous, filament-like Li electrodeposits interspersed with pores. Higher pressure promotes inorganic F-rich SEI with more uniform and denser Li film. A “seeding layer” of lithiated pristine graphene (pG@Cu) favors an anion-derived F-rich SEI and promotes uniform metal electrodeposition, enabling extended electrochemical stability at a lower pressure. State-of-the-art electrochemical performance is achieved at 1MPa: pG-enabled half-cell is stable after 300 h (50 cycles) at 1 mA cm−2 rate −3 mAh cm−2 capacity (17.5 µm plated/stripped), with cycling Coulombic efficiency (CE) of 99.8%. AF-LMB cells with high mass loading NMC622 cathode (21 mg cm−2) undergo 200 cycles with a CE of 99.4% at C/5-charge and C/2-discharge (1C = 178 mAh g−1). Density functional theory (DFT) highlights the differences in the adsorption energy of solvated-Li+ onto various crystal planes of Cu (100), (110), and (111), versus lithiated/delithiated (0001) graphene, giving insight regarding the role of support surface energetics in promoting SEI heterogeneity. 相似文献
9.
Hanyu Huo Yue Chen Jing Luo Xiaofei Yang Xiangxin Guo Xueliang Sun 《Liver Transplantation》2019,9(17)
Solid polymer electrolytes as one of the promising solid‐state electrolytes have received extensive attention due to their excellent flexibility. However, the issues of lithium (Li) dendrite growth still hinder their practical applications in solid‐state batteries (SSBs). Herein, composite electrolytes from “ceramic‐in‐polymer” (CIP) to “polymer‐in‐ceramic” (PIC) with different sizes of garnet particles are investigated for their effectiveness in dendrite suppression. While the CIP electrolyte with 20 vol% 200 nm Li6.4La3Zr1.4Ta0.6O12 (LLZTO) particles (CIP‐200 nm) exhibits the highest ionic conductivity of 1.6 × 10?4 S cm?1 at 30 °C and excellent flexibility, the PIC electrolyte with 80 vol% 5 µm LLZTO (PIC‐5 µm) shows the highest tensile strength of 12.7 MPa. A sandwich‐type composite electrolyte (SCE) with hierarchical garnet particles (a PIC‐5 µm interlayer sandwiched between two CIP‐200 nm thin layers) is constructed to simultaneously achieve dendrite suppression and excellent interfacial contact with Li metal. The SCE enables highly stable Li plating/stripping cycling for over 400 h at 0.2 mA cm?2 at 30 °C. The LiFePO4/SCE/Li cells also demonstrate excellent cycle performance at room temperature. Fabricating sandwich‐type composite electrolytes with hierarchical filler designs can be an effective strategy to achieve dendrite‐free SSBs with high performance and high safety at room temperature. 相似文献
10.
Zhi Zheng Sijiang Hu Wenji Yin Jiao Peng Rui Wang Jun Jin Beibei He Yansheng Gong Huanwen Wang Hong Jin Fan 《Liver Transplantation》2024,14(3):2303064
Hard carbon (HC) has become the most promising anode material for sodium-ion batteries (SIBs), but its plateau capacity at ≈0.1 V (Na+/Na) is still much lower than that of graphite (372 mAh g−1) in lithium-ion batteries (LIBs). Herein, a CO2-etching strategy is applied to generate abundant closed pores in starch-derived hard carbon that effectively enhances Na+ plateau storage. During CO2 etching, open pores are first formed on the carbon matrix, which are in situ reorganized to closed pores through high-temperature carbonization. This CO2-assisted pore-regulation strategy increases the diameter and the capacity of closed pores in HC, and simultaneously maintains the microsphere morphology (10–30 µm in diameter). The optimal HC anode exhibits a Na-storage capacity of 487.6 mAh g−1 with a high initial Coulomb efficiency of 90.56%. A record-high plateau capacity of 351 mAh g−1 is achieved, owing to the abundant closed micropores generated by CO2-etching. Comprehensive in situ and ex situ tests unravel that the high Na+ storage performance originates from the pore-filling mechanism in the closed micropores. 相似文献
11.
Jianwen Liang Xiaona Li Yang Zhao Lyudmila V. Goncharova Weihan Li Keegan R. Adair Mohammad Norouzi Banis Yongfeng Hu Tsun‐Kong Sham Huan Huang Li Zhang Shangqian Zhao Shigang Lu Ruying Li Xueliang Sun 《Liver Transplantation》2019,9(38)
Li metal is a promising anode material for all‐solid‐state batteries, owing to its high specific capacity and low electrochemical potential. However, direct contact of Li metal with most solid‐state electrolytes induces severe side reactions that can lead to dendrite formation and short circuits. Moreover, Li metal is unstable when exposed to air, leading to stringent processing requirements. Herein, it is reported that the Li3PS4/Li interface in all‐solid‐state batteries can be stabilized by an air‐stable LixSiSy protection layer that is formed in situ on the surface of Li metal through a solution‐based method. Highly stable Li cycling for over 2000 h in symmetrical cells and a lifetime of over 100 cycles can be achieved for an all‐solid‐state LiCoO2/Li3PS4/Li cell. Synchrotron‐based high energy X‐ray photoelectron spectroscopy in‐depth analysis demonstrates the distribution of different components within the protection layer. The in situ formation of an electronically insulating LixSiSy protection layer with highly ionic conductivity provides an effective way to prevent Li dendrite formation in high‐energy all‐solid‐state Li metal batteries. 相似文献
12.
R. Alkhatib M. Mheidat N. Abdo M. Tadros L. Al‐Eitan K. Al‐Hadid 《Plant biology (Stuttgart, Germany)》2019,21(6):1132-1139
- Heavy metals are characterised by a relatively high density and cause genotoxic, cytotoxic and mutagenic effects on plants, animals and humans. Lead (Pb) is one of the heavy metals that causes toxicity to plants and animals.
- This experiment was conducted using a hydroponic technique to study the effects of Pb(NO3)2 on physiological, biochemical and ultrastructural characteristics in Leucaena leucocephala seedlings. Plants were grown in a growth chamber for 21 days in Hoagland’s solution supplemented with 0 (control), 25, 50, 100, 300, 500 and 700 µm Pb(NO3)2.
- Shoot heights as well as root lengths decreased significantly in Pb‐treated plants with 300, 500 and 700 µm . In Pb‐treated plants with high Pb concentrations, photosynthesis rate (PN), stomatal conductance (gs) and transpiration rate (E) decreased. Total protein and carbohydrate content in Pb‐treated plants with 300, 500 and 700 µm increased significantly in leaves. Moreover, in Pb‐treated plants with 300, 500 and 700 µm Pb(NO3)2, mesophyll cells had enlarged chloroplasts with disrupted thylakoid membranes associated with large starch grains. In contrast, Pb treatments with 25, 50 µm and 100 µm were not toxic to the plants. Thick sections of roots of Pb‐treated plants with 300, 500 and 700 µm Pb showed distinct changes in structure of epidermal and cortical cells. Moreover, thin sections of roots of Pb‐treated plants with 300, 500 and 700 µm Pb had thickened walls of xylem cells.
- These results will shed more light in understanding the effects of heavy metal stress on plants.
13.
Zhe Peng Junhua Song Liyuan Huai Haiping Jia Biwei Xiao Lianfeng Zou Guomin Zhu Abraham Martinez Swadipta Roy Vijayakumar Murugesan Hongkyung Lee Xiaodi Ren Qiuyan Li Bin Liu Xiaolin Li Deyu Wang Wu Xu Ji‐Guang Zhang 《Liver Transplantation》2019,9(42)
Use of a protective coating on a lithium metal anode (LMA) is an effective approach to enhance its coulombic efficiency and cycling stability. Here, a facile approach to produce uniform silver nanoparticle‐decorated LMA for high‐performance Li metal batteries (LMBs) is reported. This effective treatment can lead to well‐controlled nucleation and the formation of a stable solid electrolyte interphase (SEI). Ag nanoparticles embedded in the surface of Li anodes induce uniform Li plating/stripping morphologies with reduced overpotential. More importantly, cross‐linked lithium fluoride‐rich interphase formed during Ag+ reduction enables a highly stable SEI layer. Based on the Ag‐LiF decorated anodes, LMBs with LiNi1/3Mn1/3Co1/3O2 cathode (≈1.8 mAh cm?2) can retain >80% capacity over 500 cycles. The similar approach can also be used to treat sodium metal anodes. Excellent stability (80% capacity retention in 10 000 cycles) is obtained for a Na||Na3V2(PO4)3 full cell using a Na‐Ag‐NaF/Na anode cycled in carbonate electrolyte. These results clearly indicate that synergetic control of the nucleation and SEI is an efficient approach to stabilize rechargeable metal batteries. 相似文献
14.
Jean‐Marie Doux Han Nguyen Darren H. S. Tan Abhik Banerjee Xuefeng Wang Erik A. Wu Chiho Jo Hedi Yang Ying Shirley Meng 《Liver Transplantation》2020,10(1)
All‐solid‐state batteries are expected to enable batteries with high energy density with the use of lithium metal anodes. Although solid electrolytes are believed to be mechanically strong enough to prevent lithium dendrites from propagating, various reports today still show cell failure due to lithium dendrit growth at room temperature. While cell parameters such as current density, electrolyte porosity, and interfacial properties have been investigated, mechanical properties of lithium metal and the role of applied stack pressure on the shorting behavior are still poorly understood. Here, failure mechanisms of lithium metal are investigated in all‐solid‐state batteries as a function of stack pressure, and in situ characterization of the interfacial and morphological properties of the buried lithium is conducted in solid electrolytes. It is found that a low stack pressure of 5 MPa allows reliable plating and stripping in a lithium symmetric cell for more than 1000 h, and a Li | Li6PS5Cl | LiNi0.80Co0.15Al0.05O2 full cell, plating more than 4 µm of lithium per charge, is able to cycle over 200 cycles at room temperature. These results suggest the possibility of enabling the lithium metal anode in all‐solid‐state batteries at reasonable stack pressures. 相似文献
15.
Jingyi Wu Zhixiang Rao Zexiao Cheng Lixia Yuan Zhen Li Yunhui Huang 《Liver Transplantation》2019,9(46)
All‐solid‐state batteries are promising candidates for the next‐generation safer batteries. However, a number of obstacles have limited the practical application of all‐solid‐state Li batteries (ASSLBs), such as moderate ionic conductivity at room temperature. Here, unlike most of the previous approaches, superior performances of ASSLBs are achieved by greatly reducing the thickness of the solid‐state electrolyte (SSE), where ionic conductivity is no longer a limiting factor. The ultrathin SSE (7.5 µm) is developed by integrating the low‐cost polyethylene separator with polyethylene oxide (PEO)/Li‐salt (PPL). The ultrathin PPL shortens Li+ diffusion time and distance within the electrolyte, and provides sufficient Li+ conductance for batteries to operate at room temperature. The robust yet flexible polyethylene offers mechanical support for the soft PEO/Li‐salt, effectively preventing short‐circuits even under mechanical deformation. Various ASSLBs with PPL electrolyte show superior electrochemical performance. An initial capacity of 135 mAh g?1 at room temperature and the high‐rate capacity up to 10 C at 60 °C can be achieved in LiFePO4/PPL/Li batteries. The high‐energy‐density sulfur cathode and MoS2 anode employing PPL electrolyte also realize remarkable performance. Moreover, the ASSLB can be assembled by a facile process, which can be easily scaled up to mass production. 相似文献
16.
Un‐Hyuck Kim Hoon‐Hee Ryu Jae‐Hyung Kim Robert Mücke Payam Kaghazchi Chong S. Yoon Yang‐Kook Sun 《Liver Transplantation》2019,9(15)
A multicompositional particulate Li[Ni0.9Co0.05Mn0.05]O2 cathode in which Li[Ni0.94Co0.038Mn0.022]O2 at the particle center is encapsulated by a 1.5 µm thick concentration gradient (CG) shell with the outermost surface composition Li[Ni0.841Co0.077Mn0.082]O2 is synthesized using a differential coprecipitation process. The microscale compositional partitioning at the particle level combined with the radial texturing of the refined primary particles in the CG shell layer protracts the detrimental H2 → H3 phase transition, causing sharp changes in the unit cell dimensions. This protraction, confirmed by in situ X‐ray diffraction and transmission electron microscopy, allows effective dissipation of the internal strain generated upon the H2 → H3 phase transition, markedly improving cycling performance and thermochemical stability as compared to those of the conventional single‐composition Li[Ni0.9Co0.05Mn0.05]O2 cathodes. The compositionally partitioned cathode delivers a discharge capacity of 229 mAh g?1 and exhibits capacity retention of 88% after 1000 cycles in a pouch‐type full cell (compared to 68% for the conventional cathode). Thus, the proposed cathode material provides an opportunity for the rational design and development of a wide range of multifunctional cathodes, especially for Ni‐rich Li[NixCoyMn1‐x‐y]O2 cathodes, by compositionally partitioning the cathode particles and thus optimizing the microstructural response to the internal strain produced in the deeply charged state. 相似文献
17.
Fengyu Xie Mouhamad Said Diallo Haegyeom Kim Qingsong Howard Tu Gerbrand Ceder 《Liver Transplantation》2024,14(10):2302960
Lithium metal solid-state batteries (LMSSBs) have demonstrated their high energy density and cycling performance at high current densities in an anode-free architecture, featuring a thin Ag/C composite buffer layer (BL) between the current collector (CC) and the solid electrolyte (SE). This study explains the microscopic mechanism of the Ag/C BL by using first-principles atomistic and continuum modeling. It is shown that Ag effectively acts as a homogeneous solid-solution beyond AgLi2.32 and maintains a positive potential even at AgLi25 during lithiation. Key factors underlying the working of the Ag/C BL include lower interfacial resistance at the BL/CC interface than at the BL/SE interface, leading to predominant Li deposition on BL/CC, and substantial Ag–Li volume expansion during lithiation. This, combined with stronger BL/SE adhesion, causes BL/SE separation and Ag–Li extrusion toward the CC side. During delithiation, Ag re-precipitates as nanoparticles uniformly on the CC, with its positive lithiation potential homogenizing Li currents in subsequent cycles. Other metals are less effective due to their relatively large overpotential, premature lithiation termination, and limited volume expansions hindering movement toward the CC. The study aids the BL design, focusing on metal choice and optimization material and microstructural properties, such as the Li-ion conductivity and interfacial resistance. 相似文献
18.
Xinyu Da Jing Chen Yanyang Qin Jianyun Zhao Xin Jia Yuanjun Zhao Xuetian Deng Yanan Li Na Gao Yaqiong Su Qiang Rong Xiangpeng Kong Junqiao Xiong Xiaofei Hu Shujiang Ding Guoxin Gao 《Liver Transplantation》2024,14(11):2303527
All-solid-state lithium metal batteries (ASSLMBs) hold great promise for the development of next-generation high-safety, high-energy-density lithium batteries, but still face the challenges of lithium dendrite growth and thickness. Herein, the ultrathin PEO-based composite solid polymer electrolyte (denoted as PAL) supported by a low-density self-supporting aramid nanofiber (ANF) aerogel framework is developed. The ANF aerogel obtained by a novel CO2-assisted induced self-assembly method has a well-designed bilayer structure with double cross-linking degree. Benefiting from the intermolecular interaction between ANFs and PEO, the PAL achieves an ultrathin thickness (20 µm) with excellent thermal stability and mechanical strength. Meanwhile, due to the modulation of ionic pathways by the functionalized ANF, the PAL achieves uniform lithium deposition without dendrites, resulting in stable long cycling (1400 h) for symmetric cells. Consequently, the Li|PAL|LiFePO4 (LFP) cell has excellent long-term cycling stability (1 C, >700 cycles, Coulombic efficiency > 99.8%) and fast charge/discharge performance (rate, 10 C). More practically, the Li|PAL|LFP cell achieves an energy density of 180 Wh kg−1 due to the ability to match a high-loading (8 mg cm−2) cathode. Furthermore, the double-layer Li|PAL|LFP pouch cell demonstrates excellent flexibility and safety in cycling and abuse tests. 相似文献
19.
Compact 3D Copper with Uniform Porous Structure Derived by Electrochemical Dealloying as Dendrite‐Free Lithium Metal Anode Current Collector
下载免费PDF全文
![点击此处可从《Liver Transplantation》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Heng Zhao Danni Lei Yan‐Bing He Yifei Yuan Qinbai Yun Bin Ni Wei Lv Baohua Li Quan‐Hong Yang Feiyu Kang Jun Lu 《Liver Transplantation》2018,8(19)
The development of lithium (Li) metal anodes Li metal batteries faces huge challenges such as uncontrolled Li dendrite growth and large volume change during Li plating/stripping, resulting in severe capacity decay and high safety hazards. A 3D porous copper (Cu) current collector as a host for Li deposition can effectively settle these problems. However, constructing a uniform and compact 3D porous Cu structure is still an enormous challenge. Herein, an electrochemical etching method for Cu–Zinc (Zn) alloy is reported to precisely engrave a 3D Cu structure with uniform, smooth, and compact porous network. Such a continuous structure endows 3D Cu excellent mechanical properties and high electrical conductivity. The uniform and smooth pores with a large internal surface area ensures well dispersed current density for homogeneous Li metal deposition and accommodation. A smooth and stable solid electrolyte interphase is formed and meanwhile Li dendrites and dead Li are effectively suppressed. The Li metal anode conceived 3D Cu current collector can stably cycle for 400 h under an Li plating/stripping capacity of 1 mA h cm?2 and a current density of 1 mA cm?2. The Li@3D Cu||LiFePO4 full cells present excellent cycling and rate performances. The electrochemical dealloying is a robust method to construct 3D Cu current collectors for dendrite‐free Li metal anodes. 相似文献
20.
Hui Xu Sa Li Xinlong Chen Can Zhang Wenjian Liu Huimin Fan Yue Yu Yunhui Huang Ju Li 《Liver Transplantation》2019,9(42)
Self‐supporting Sn foil is a promising high‐volumetric‐capacity anode for lithium ion batteries (LIBs), but it suffers from low initial Coulombic efficiency (ICE). Here, mechanical prelithiation is adopted to improve ICE, and it is found that Sn foils with coarser grains are prone to cause electrode damage. To mitigate damage and prepare thinner lithiated electrodes, 3Ag0.5Cu96.5Sn foil is used that has more refined grains (5–10 µm) instead of Sn (50–100 µm), where the abundant grain boundaries (GBs) offer more sliding systems to release stress and reduce deep fractures. Thus, the thickness of Lix3Ag0.5Cu96.5Sn can be reduced to 50 µm, compared to 100 µm LixSn. When the foils contact open air, the Sn‐Li‐O(H) products are more stable than Li‐O(H), thus Lix3Ag0.5Cu96.5Sn shows outstanding air stability. The as‐prepared 50 µm foil anode achieves stable 200 cycles in LiFePO4//Lix3Ag0.5Cu96.5Sn full cell (≈2.65 mAh cm?2) and the capacity retention is 95%. Even at 5C, the capacity of Lix3Ag0.5Cu96.5Sn is still up to ≈1.8 mAh cm?2. The cycle life of NCM523//Lix3Ag0.5Cu96.5Sn full cell exceeds that of NCM523//Li. Furthermore, 70 µm Lix3Ag0.5Cu96.5Sn is used as double‐sided anode for a 3 cm × 2.8 cm pouch cell and its actual volumetric capacity density is 674 mAh cm?3 after 50 cycles. 相似文献