Construction of Stable Li2O-Rich Solid Electrolyte Interphase for Practical PEO-Based Li-Metal Batteries

Polyethylene oxide (PEO)-based solid polymer electrolytes (SPE) have garnered recognition as highly promising candidates for advanced lithium-metal batteries. However, the practical application of PEO-based SPE is hindered by its low critical current density (CCD) resulting from undesired dendrite growth. In this study, a PEO-based SPE that exhibits an ultra-high CCD (4 mA cm⁻²) is presented and enhanced lithium ionic conductivity through the incorporation of small amounts of P₂S₅ (PS). The crystalline Li₂O-rich and P/S-containing solid electrolyte interphase (SEI) is revealed by cryo-electron microscope (cryo-EM) and Time of flight secondary ion mass spectrometry (TOF-SIMS), which inhibits dendrite growth and adverse reactions between SPE and reductive lithium, thus offering a spherical growth behavior for dendrite-free lithium metal anode. Consequently, utilizing the PS-integrated SPE, a Li-Li symmetric cell demonstrates reduced resistance during operation, enabling stable cycles exceeding 200 hours at 0.5 mA cm⁻² and 0.5 mAh cm⁻², a stringent test condition for PEO-based electrolytes. Moreover, a Li/SPE/LiFePO₄ (LFP) pouch cell exhibits 80% capacity retention after 100 cycles with 50 µm Li and 30 µm PEO electrolyte, showcasing its potential for practical applications.     

Gradient-Structured and Robust Solid Electrolyte Interphase In Situ Formed by Hydrated Eutectic Electrolytes for High-Performance Zinc Metal Batteries

The mechanically and electrochemically stable and ionically conducting solid electrolyte interphase (SEI) is important for the stabilization of metal anodes. Since SEIs are originally absent in aqueous zinc metal batteries (AZMBs), it is very challenging to suppress water-induced side reactions and dendrite growth of Zn metal anodes (ZMAs). Herein, a gradient-structured and robust solid gradient SEI, consisting of B,O-inner and F,O-exterior layer, in situ formed by hydrated eutectic electrolyte for the homogeneous and reversible Zn deposition, is demonstrated. Moreover, the molar ratio of acetamide to Zn salt is modulated to prohibit the water activity and the hydrolysis of BF₄⁻ as well as to achieve high ionic conductivity owing to the regulation of the solvation sheath of Zn²⁺. Consequently, the eutectic electrolyte allows Zn||Zn symmetric cells to achieve a cycling lifespan of over 4400 h at 0.5 mA cm⁻² as well as Zn||PANI full cells to deliver a high capacity retention of 73.2% over 4000 cycles at 1 A g⁻¹ and to demonstrate the stable operation at low temperatures. This work provides the rational design for the hydrated eutectic electrolyte and the corresponding gradient SEIs for dendrite-free and stable Zn anodes even under harsh conditions.     

Fast Charge-Transfer Rates in Li-CO2 Batteries with a Coupled Cation-Electron Transfer Process

Li-CO₂ batteries with a high theoretical energy density (1876 Wh kg⁻¹) have unique benefits for reversible carbon fixation for energy storage systems. However, due to lack of stable and highly active catalysts, the long-term operation of Li-CO₂ batteries is limited to low current densities (mainly <0.2 mA cm⁻²) that are far from practical conditions. In this work, it is discovered that, with an ionic liquid-based electrolyte, highly active and stable transition metal trichalcogenide alloy catalysts of Sb_0.67Bi_1.33X₃ (X = S, Te) enable operation of the Li-CO₂ battery at a very high current rate of 1 mA cm⁻² for up to 220 cycles. It is revealed that: i) the type of chalcogenide (Te vs S) significantly affects the electronic and catalytic properties of the catalysts, ii) a coupled cation-electron charge transfer process facilitates the carbon dioxide reduction reaction (CO₂RR) occurring during discharge, and iii) the concentration of ionic liquid in the electrolyte controls the number of participating CO₂ molecules in reactions. A combination of these key factors is found to be crucial for a successful operation of the Li-CO₂ chemistry at high current rates. This work introduces a new class of catalysts with potential to fundamentally solve challenges of this type of batteries.     

Single-Atom Immobilization Boosting Oxygen Redox Kinetics of High-Entropy Perovskite Oxide Toward High-Performance Lithium-Oxygen Batteries

Understanding and modulating the unique electronic interaction between single-metal atoms and high entropy compounds are of great significance to enable their high-efficiency oxygen electrocatalysis for aprotic lithium-oxygen (Li-O₂) batteries. Herein, a novel bi-functional electrocatalyst is for the first time created by immobilizing single-atom ruthenium (Ru) on lanthanum-based high entropy perovskite oxide La(Mn_0.2Co_0.2Fe_0.2Ni_0.2Cr_0.2)O₃ (Ru@HEPO), which demonstrates high activity and stability in Li-O₂ batteries. The heteronuclear coordination between single-atom Ru and HEPO facilitates fast electron transfer from Ru to HEPO by establishing Ru-O-M (M stands for Mn, Co, Fe, Ni) bridges, which well redistributes electrons within the Ru@HEPO hence significantly improving its interfacial charge transfer kinetics and electrocatalytic activity. Additionally, the strong electron coupling between Ru and Mn atoms enhances the hybridization between Mn 3d and O 2p orbitals, which promotes the inherent affinity of Ru@HEPO toward the LiO₂ intermediate, thereby reducing the reaction energy barrier of the oxygen electrode. As a result, the Ru@HEPO-based Li-O₂ batteries deliver remarkable electrochemical performances, such as high energy efficiency (87.3% at 100 mA g⁻¹), excellent rate capability (low overpotential of 0.52 V at 100 mA g⁻¹) and durable cyclability (345 cycles at 300 mA g⁻¹). This work opens up a promising avenue for the development of high entropy-based electrocatalysts for Li-O₂ batteries by precisely tailoring the electronic distributions at an atomic scale.     

A 3 µm-Ultrathin Hybrid Electrolyte Membrane with Integrative Architecture for All-Solid-State Lithium Metal Batteries

Ultrathin all-solid-state electrolytes with an excellent Li⁺ transport behavior are highly desirable for developing high-energy-density solid-state lithium metal batteries. However, how to balance the electrochemical performance and their mechanical properties remains a huge challenge. Herein, an ultrathin solid electrolyte membrane with a thickness of only 3 µm and a weight of 11.7 g m⁻² is well constructed by integrating individual functionalized organic with inorganic modules. Impressively, the optimized hybrid electrolyte membrane shows a set of merits including a high room-temperature ionic conductivity of 1.77 × 10⁻⁴ S cm⁻¹, large Li⁺ transference number of 0.65, and strong mechanical strength (strength of 29 MPa, elongation of 95%), as well as negligible thermal shrink at 180 °C. The analysis results reveal that the lithium sulfonate-functionalized mesoporous silica nanoparticles in the membrane play a crucial role in the selective transport of Li⁺ through anion trapping and cation exchange. The pouch full cell is further assembled with a high-voltage NCM cathode and thin lithium anode, which exhibits excellent long-term cycling stability, outstanding rate performance at room temperature, and high safety against abused conditions. The current work provides an innovative strategy for achieving lithium metal batteries with ultrathin all-solid-state electrolytes.     

Viscoelastic and Nonflammable Interface Design–Enabled Dendrite‐Free and Safe Solid Lithium Metal Batteries

Herein, a composite polymer electrolyte with a viscoelastic and nonflammable interface is designed to handle the contact issue and preclude Li dendrite formation. The composite polymer electrolyte (cellulose acetate/polyethylene glycol/Li_1.4Al_0.4Ti_1.6P₃O₁₂) exhibits a wide electrochemical window of 5 V (vs Li⁺/Li), a high Li⁺ transference number of 0.61, and an excellent ionic conductivity of above 10^?4 S cm^?1 at 60 °C. In particular, the intimate contact, low interfacial impedance, and fast ion‐transport process between the electrodes and solid electrolytes can be simultaneously achieved by the viscoelastic and nonflammable layer. Benefiting from this novel design, solid lithium metal batteries with either LiFePO₄ or LiCoO₂ as cathode exhibit superior cyclability and rate capability, such as a discharge capacity of 157 mA h g^?1 after 100 cycles at C/2 and 97 mA h g^?1 at 5C for LiFePO₄ cathode. Moreover, the smooth and uniform Li surface after long‐term cycling confirms the successful suppression of dendrite formation. The viscoelastic and nonflammable interface modification of solid electrolytes provides a promising and general strategy to handle the interfacial issues and improves the operative safety of solid lithium metal batteries.     

Hybrid Polymer Electrolyte Encased Cathode Particles Interface-Based Core–Shell Structure for High-Performance Room Temperature All-Solid-State Batteries

A smooth interfacial contact between electrode and electrolyte, alleviation of dendrite formation, low internal resistance, and preparation of thin electrolyte (<20 µm) are the key challenging tasks in the practical application of Li₇La₃Zr₂O₁₂ (LLZO)-based solid-state batteries (SSBs). This paper develops a unique strategy to reduce interfacial resistance by designing an interface-based core–shell structure via direct integration of Al-LLZO ceramic nanofibers incorporated poly(vinylidene fluoride)/LiTFSI on the surface of a porous cathode electrode (HPEIC). This yields an ultrathin solid polymer electrolyte with a thickness of 7 µm. The integrated HPEIC/Li SSB with LiFePO₄/C exhibits an initial specific capacity of 166 mAh g⁻¹ at 0.1 C and 159 mAh g⁻¹ with capacity retention of 100% after 120 cycles at 0.5 C (25 °C). The HPEIC/Li SSB with LiNi_0.8Mn_0.1Co_0.1O₂ cathode delivers a good discharge capacity of 134 mAh g⁻¹ after 120 cycles at 0.5 C. The rational design of interface-based core–shell structure outperforms the conventional assembly of solid-state cells using free-standing solid electrolytes in specific capacity, internal resistance, and rate performance. The proposed strategy is simple, cost-effective, robust, and scalable manufacturing, which is essential for the practical applicability of SSBs.     

Diluents Effect on Inhibiting Dissolution of Organic Electrode for Highly Reversible Li-Ion Batteries

The potential of organic electrodes in lithium-ion batteries (LIBs) is highlighted by their cost-effectiveness and natural abundance. However, the dissolution of the active material in the electrolyte is a major obstacle to their use in LIBs. Although high-concentration electrolytes (HCEs) have been proposed to address this issue, they face challenges such as high viscosity, poor wettability, and suboptimal ion conductivity. Hence, this study introduces diluted electrolytes as non-solvating electrolytes to offset the physical limitations of HCEs and suppress the dissolution of organic electrodes. When a diluted electrolyte is used, perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA)—a notable organic electrode material—demonstrates superior capacity retention and rate performance, achieving 91% of capacity retained at 1000 mA g⁻¹ over 1000 cycles. Through electrochemical and spectroscopic measurements and molecular dynamics simulations, the diluted electrolyte successfully inhibits and demonstrates the dissolution of the active material, preventing capacity loss and the detrimental shuttle effect. This study presents a promising strategy for achieving highly reversible organic electrode-based LIBs through the development of nonsolvating electrolytes.     

Toward a Reversible Mn4+/Mn2+ Redox Reaction and Dendrite‐Free Zn Anode in Near‐Neutral Aqueous Zn/MnO2 Batteries via Salt Anion Chemistry

Rechargeable aqueous Zn/MnO₂ batteries are very attractive large‐scale energy storage technologies, but still suffer from limited cycle life and low capacity. Here the novel adoption of a near‐neutral acetate‐based electrolyte (pH ≈ 6) is presented to promote the two‐electron Mn⁴⁺/Mn²⁺ redox reaction and simultaneously enable a stable Zn anode. The acetate anion triggers a highly reversible MnO₂/Mn²⁺ reaction, which ensures high capacity and avoids the issue of structural collapse of MnO₂. Meanwhile, the anode‐friendly electrolyte enables a dendrite‐free Zn anode with outstanding stability and high plating/stripping Coulombic efficiency (99.8%). Hence, a high capacity of 556 mA h g^?1, a lifetime of 4000 cycles without decay, and excellent rate capability up to 70 mA cm^?2 are demonstated in this new near‐neutral aqueous Zn/MnO₂ battery by simply manipulating the salt anion in the electrolyte. The acetate anion not only modifies the surface properties of MnO₂ cathode but also creates a highly compatible environment for the Zn anode. This work provides a new opportunity for developing high‐performance Zn/MnO₂ and other aqueous batteries based on the salt anion chemistry.     

Polymer‐in‐“Quasi‐Ionic Liquid” Electrolytes for High‐Voltage Lithium Metal Batteries

Due to the limited oxidation stability (<4 V) of ether oxygen in its polymer structure, polyethylene oxide (PEO)‐based polymer electrolytes are not compatible with high‐voltage (>4 V) cathodes, thus hinder further increases in the energy density of lithium (Li) metal batteries (LMBs). Here, a new type of polymer‐in‐“quasi‐ionic liquid” electrolyte is designed, which reduces the electron density on ethereal oxygens in PEO and ether solvent molecules, induces the formation of stable interfacial layers on both surfaces of the LiNi_1/3Mn_1/3Co_1/3O₂ (NMC) cathode and the Li metal anode in Li||NMC batteries, and results in a capacity retention of 88.4%, 86.7%, and 79.2% after 300 cycles with a charge cutoff voltage of 4.2, 4.3, and 4.4 V for the LMBs, respectively. Therefore, the use of “quasi‐ionic liquids” is a promising approach to design new polymer electrolytes for high‐voltage and high‐specific‐energy LMBs.     

MXene‐Based Mesoporous Nanosheets Toward Superior Lithium Ion Conductors

Although solid polymer electrolytes have some intrinsic advantages in synthesis and film processing compared with inorganic solid electrolytes, low ionic conductivities and mechanical moduli hamper their practical applications in lithium‐based batteries. Here, an efficient strategy is developed to produce a unique solid polymer electrolyte containing MXene‐based mesoporous silica nanosheets with a sandwich structure, which are fabricated via controllable hydrolysis of tetraethyl orthosilicate around the surface of MXene‐Ti₃C₂ under the direction of cationic surfactants. Such unique nanosheets not only exhibit individual, thin, and insulated features, but also possess abundant functional groups in mesopores and on the surface, which are favorable for the formation of Lewis acid–base interactions with anions in polymer electrolytes such as poly(propylene oxide) elastomer, enabling the fast Li⁺ transportation at the mesoporous nanosheets/polymer interfaces. As a consequence, a solid polymer electrolyte with high ionic conductivity of 4.6 × 10^?4 S cm^?1, high Young's modulus of 10.5 MPa, and long‐term electrochemical stability is achieved.     

Interrelation Between External Pressure,SEI Structure,and Electrodeposit Morphology in an Anode-Free Lithium Metal Battery

The interrelation is explored between external pressure (0.1, 1, and 10 MPa), solid electrolyte interphase (SEI) structure/morphology, and lithium metal plating/stripping behavior. To simulate anode-free lithium metal batteries (AF-LMBs) analysis is performed on “empty” Cu current collectors in standard carbonate electrolyte. Lower pressure promotes organic-rich SEI and macroscopically heterogeneous, filament-like Li electrodeposits interspersed with pores. Higher pressure promotes inorganic F-rich SEI with more uniform and denser Li film. A “seeding layer” of lithiated pristine graphene (pG@Cu) favors an anion-derived F-rich SEI and promotes uniform metal electrodeposition, enabling extended electrochemical stability at a lower pressure. State-of-the-art electrochemical performance is achieved at 1MPa: pG-enabled half-cell is stable after 300 h (50 cycles) at 1 mA cm⁻² rate −3 mAh cm⁻² capacity (17.5 µm plated/stripped), with cycling Coulombic efficiency (CE) of 99.8%. AF-LMB cells with high mass loading NMC622 cathode (21 mg cm⁻²) undergo 200 cycles with a CE of 99.4% at C/5-charge and C/2-discharge (1C = 178 mAh g⁻¹). Density functional theory (DFT) highlights the differences in the adsorption energy of solvated-Li⁺ onto various crystal planes of Cu (100), (110), and (111), versus lithiated/delithiated (0001) graphene, giving insight regarding the role of support surface energetics in promoting SEI heterogeneity.     

Steel Anti-Corrosion Strategy Enables Long-Cycle Zn Anode

The progress of aqueous zinc batteries (AZBs) is limited by the poor cycling life due to Zn anode instability, including dendrite growth, surface corrosion, and passivation. Inspired by the anti-corrosion strategy of steel industry, a compounding corrosion inhibitor (CCI) is employed as the electrolyte additive for Zn metal anode protection. It is shown that CCI can spontaneously generate a uniform and ≈30 nm thick solid-electrolyte interphase (SEI) layer on Zn anode with a strong adhesion via Zn O bonding. This SEI layer efficiently prohibits water corrosion and guides homogeneous Zn deposition without obvious dendrite formation. This enables reversible Zn deposition and dissolution for over 1100 h under the condition of 1 mA cm⁻² and 1 mAh cm⁻² in symmetric cells. The Zn-MnO₂ full cells with CCI-modified electrolyte deliver an ultralow capacity decay rate (0.013% per cycle) at 0.5 A g⁻¹ over 1000 cycles. Such an innovative strategy paves a low-cost way to achieve AZBs with long lifespan.     

Sulfur Solutions: Advancing High Voltage and High Energy Lithium Batteries with Organosulfur Electrolytes

Achieving energy densities exceeding 350 Wh kg⁻¹ while operating at elevated voltages (>4.5 V vs Li/Li⁺) is attainable through judicious selection of electrochemical pairs at the cathode and anode. However, current state-of-the-art electrolytes exhibit limited stability when exposed to systems operating at or above 4.3 V. This limitation contributes to the degradation of electrode materials and raises critical safety concerns, impeding the commercialization of such systems. Consequently, there has been a notable surge in research efforts aimed at developing innovative electrolyte compositions capable of supporting high-voltage lithium-ion batteries (LIBs). A substantial portion of this research has focused on the family of organosulfur molecules, which possess high oxidative stability. Organosulfur salts also facilitate the formation of dense, ionically conductive solid electrolyte interfaces (SEI) and demonstrate excellent solubility. This article provides a comprehensive overview of the field of organosulfur electrolyte components for their applications in energy storage, encompassing solvents, alternative conducting salts, and additives. It emphasizes the idea that the deliberate design of electrolyte compositions is instrumental in controlling electrode passivation, with organosulfur-based structures historically proving advantageous in every aspect of the electrolyte. Crucially, it should be noted that many of these components are commercially available, holding significant implications for industrial applications.     

Flexible,Scalable, and Highly Conductive Garnet‐Polymer Solid Electrolyte Templated by Bacterial Cellulose

Solid‐state electrolytes are a promising candidate for the next‐generation lithium‐ion battery, as they have the advantages of eliminating the leakage hazard of liquid solvent and elevating stability. However, inherent limitations such as the low ionic conductivity of solid polymer electrolytes and the high brittleness of inorganic ceramic electrolytes severally impede their practical application. Here, an inexpensive, facile, and scalable strategy to fabricate a hybrid Li₇La₃Zr₂O₁₂ (LLZO) and poly(ethylene oxide)‐based electrolyte by exploiting bacterial cellulose as a template is reported. The well‐organized LLZO network significantly enhances the ionic conductivity by extending long transport pathways for Li ions, exhibiting an elevated conductivity of 1.12 × 10^?4 S cm^?1. In addition, the hybrid electrolyte presents a structural flexibility, with minor impedance increase after bending. The facile and applicable approach establishes new principles for the strategy of designing scalable and flexible hybrid polymer electrolytes that can be utilized for high‐energy‐density batteries.     

Robust Hybrid Solid Electrolyte Interface Induced by Zn-Poor Electric Double Layer for A Highly Reversible Zinc Anode

Aqueous Zn-ion batteries (AZIBs) show great potential in new energy storage devices due to low cost, inherent safety, and environmental friendliness. However, the severe dendrites and side reactions on the anode greatly constrain their practical application. Herein, a novel colloidal electrolyte composed of ZnSO₄ and sodium carboxymethyl cellulose (CMC-Na) has been developed for inhibiting dendrite growth on Zn anode. Molecular dynamics (MD) simulation confirms that CMC-Na alters the electric double layer (EDL) structure of Zn anode surface to reduce the content of water and SO₄²⁻ and inhibit side reactions. More importantly, an organic/inorganic hybrid solid electrolyte interface (SEI) layer is in situ constructed during the cycling, which enables ultrastable Zn plating/stripping (> 2000 h) under high current density (5 mA cm⁻², 5 mAh cm⁻²) and high coulombic efficiency (99.8%) for more than 1000 cycles. Meanwhile, zinc-ion hybrid capacitors (ZIHCs) with the colloidal electrolyte exhibit a favorable capacitance retention of 97% after 15000 cycles at the current density of 2 A g⁻¹. Even at a high current density of 5 A g⁻¹, it still has a capacitance retention of 96% after 30000 cycles. This study presents a novel electrolyte strategy for the formation of ultrastable electrode-electrolyte interfaces in AZIBs.     

In Situ Generated Fireproof Gel Polymer Electrolyte with Li6.4Ga0.2La3Zr2O12 As Initiator and Ion‐Conductive Filler

Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐HFP) based gel polymer electrolyte is regarded as a promising candidate to settle the safety issues of liquid electrolytes. However, the currently reported gel polymer electrolytes are still not safe enough owing to high amount of flammable liquid solvents contained in them. Herein, a fireproof PVDF‐HFP based gel polymer electrolyte is designed and synthesized through an in situ crosslinking method, with Li_6.4Ga_0.2La₃Zr₂O₁₂ as initiator and ion‐conductive filler. The obtained gel polymer electrolyte demonstrates superior fire resisting properties. The optimized gel polymer electrolyte exhibits an ionic conductivity as high as 1.84 × 10^?3 S cm^?1 at 20 °C with an electrochemical window up to 4.75 V at room temperature. Moreover, the obtained gel polymer electrolyte shows excellent compatibility with lithium anodes. Therefore, the lithium anode is well protected. Lithium batteries assembled with the gel polymer electrolyte possess superb safety properties in cutting and burning tests. Furthermore, the batteries also show a discharge retention rate as high as 94.08% (in comparison with the initial discharge capacity) after cycling at 0.5 C for 360 cycles with an average columbic efficiency higher than 98%. The purpose of this report is to show the great potential of applying fire‐retardant gel polymer electrolyte to achieve high safety lithium batteries.     

Self-Regulating Interfacial Space Charge through Polyanion Repulsion Effect towards Dendrite-Free Polymer Lithium-Metal Batteries

Uncontrolled transport of anions leads to many issues, including concentration polarization, excessive interface side reactions, and space charge-induced lithium dendrites at the anode/electrolyte interface, which severely deteriorates the cycling stability of lithium metal batteries. Herein, an asymmetrical polymer electrolyte modified by a boron-containing single-ion conductor (LiPVAOB), is designed to inhibit the nonuniform aggregation of free anions in the vicinity of the lithium anode through the repulsion effect improving the lithium-ion transference number to 0.63. This LiPVAOB exerts a repulsion interaction with free anions even at a long distance and a selective effect for free anions transport, which diminishes uneven aggregation of free anions at the interface and suppresses space charges-induced lithium dendrites growth. Consequently, the assembled Li||Li cell delivers an ultra-long cycle for over 5400 h. The Li||LiFePO₄ cell exhibits outstanding cycle performance with a capacity retention of 93% over 4500 cycles. In particular, the assembled high-voltage Li||Li_1.2Ni_0.2Mn_0.6O₂ cell (charged to 4.8 V) exhibits good cycle stability with a high specific capacity of 245 mAh g⁻¹. This designed polymer electrolyte provides a promising strategy for regulating ion transport to inhibit space charge-induced lithium dendrite growth for high-performance lithium metal batteries.     

Simultaneously Enhancing the Thermal Stability,Mechanical Modulus,and Electrochemical Performance of Solid Polymer Electrolytes by Incorporating 2D Sheets

Solid state electrolytes are the key components for high energy density lithium ion batteries and especially for lithium metal batteries where lithium dendrite growth is an inevitable obstacle in liquid electrolytes. Solid polymer electrolytes based on a complex of polymers and lithium salts are intrinsically advantageous over inorganic electrolytes in terms of processability and film‐forming properties. But other properties such as ionic conductivity, thermal stability, mechanical modulus, and electrochemical stability need to be improved. Herein, for the first time, 2D additives using few‐layer vermiculite clay sheets as an example to comprehensively upgrade poly(ethylene oxide)‐based solid polymer electrolyte are introduced. With clay sheet additives, the polymer electrolyte exhibits improved thermal stability, mechanical modulus, ionic conductivity, and electrochemical stability along with reduced flammability and interface resistance. The composite polymer electrolyte can suppress the formation and growth of lithium dendrites in lithium metal batteries. It is anticipated that the clay sheets upgraded solid polymer electrolyte can be integrated to construct high performance solid state lithium ion and lithium metal batteries with higher energy and safety.     

Inducing the Preferential Growth of Zn (002) Plane for Long Cycle Aqueous Zn-Ion Batteries

Uncontrolled growth of Zn dendrites is the main reason for the short-circuit failure of aqueous Zn-ion batteries. Using electrolyte additives to manipulate the crystal growth is one of the most convenient strategies to mitigate the dendrite issue. However, most additives would be unstable during cycling due to the structural reconstruction of the deposition layer. Herein, it is proposed to use 1-butyl-3-methylimidazolium cation (BMIm⁺ ion) as an electrolyte additive, which could steadily induce the preferential growth of (002) plane and inhibit the formation of Zn dendrites. Specifically, BMIm⁺ ion will be preferentially adsorbed on (100) and (101) planes of Zn anodes, forcing Zn²⁺ ion to deposit on the (002) plane, thus inducing the preferential growth of the (002) plane and forming a flat and compact deposition layer. As a result, the Zn anode cycles for 1000 h at10 mA cm⁻² and 10 mAh cm⁻² as well as a high Coulombic efficiency of 99.8%. Meanwhile, the NH₄V₄O₁₀||Zn pouch cell can operate stably for 240 cycles at 0.4 A g⁻¹. The BMIm⁺ ion additive keeps a stable effect on the structural reconstruction of the Zn anode during the prolonged cycling.