In Situ Active Site Refreshing of Electro-Catalytic Materials for Ultra-Durable Hydrogen Evolution at Elevated Current Density

Enhancing the durability of catalysts is of critical significance to industrialize green hydrogen production. Herein, a novel active site in situ refreshing strategy is proposed and demonstrated to fabricate highly active and ultra-durable hydrogen evolution reaction (HER) electro-catalytic material by HER activation. Briefly, a composite catalytic material is synthesized, which features Ni(PO₃)₂ active sites being embedded inside the amorphous Mo compound matrix (named NiMoO-P). The Mo compound matrix undergoes gradual dissolution during HER followed by a dynamic equilibrium between the dissolution and deposition of the amorphous matrix. This process promotes the continuous exposure of insoluble Ni(PO₃)₂ and Ni₂P partially converted from Ni (PO₃) ₂ in situ on the surface during HER activation. Thus, activated catalyst exhibits excellent HER performance featuring an extremely high current density of 1500 mA cm⁻² at a rather low overpotential of 340 mV, and more attractively, an ultra-long durability for hydrogen evolution for at least 1000 h at an industrial-applicable current density of 900 mA cm⁻². The mechanisms for the especially high HER performance are attributed to the exposure and continuous refreshing of Ni(PO₃)₂ and the in situ formed Ni₂P during the HER process based on the DFT calculations and quasi-in situ Raman spectroscopic monitoring.     

Dislocation Network-Boosted PtNi Nanocatalysts Welded on Nickel Foam for Efficient and Durable Hydrogen Evolution at Ultrahigh Current Densities

Large-scale application of alkaline water electrolysis for high-rate hydrogen production is severely hindered by high electricity cost, mainly due to difficulties to acquire cost-effective catalytic electrodes with both extremely low overpotential and long-term durability at ultrahigh current densities (≥1 A cm⁻²). Here it is demonstrated that by adopting a synthetic method of laser direct writing in liquid nitrogen via a commercial laser welding machine, a remarkably efficient and durable electrode with large area and low platinum content is obtained, where PtNi nanocatalysts with dislocation network are firmly welded on a nickel foam (NF). The dense dislocation network not only improves intrinsic activity of a majority of surface-active sites induced by coupled compressive-tensile strains synergistically promoting both Volmer and Tafel steps of alkaline hydrogen evolution reaction (HER), but also well stabilizes surface dislocations for HER at ultrahigh current densities. Such a robust electrode achieves record-low overpotentials of 5 and 63 mV at 10 and 1000 mA cm⁻² in alkaline medium, respectively, exhibiting negligible activity decay after 300 h chronoamperometric test at 1 A cm⁻². It displays a high Pt mass activity 16 times higher than 20 wt% Pt/C loaded on NF, surpassing most of the recently reported efficient Pt-based catalysts.     

Hierarchically Multiscale Vertically Oriented NiFeCo Nanoflakes for Efficient Electrochemical Oxygen Evolution at High Current Densities

Crucial advancements in versatile catalyst systems capable of achieving high current densities under industrial conditions, bridging the gap between fundamental understanding and practical applications, are pivotal to propel the hydrogen economy forward. In this study, vertically oriented hierarchically multiscale nanoflakes of NiFeCo electrocatalysts are presented, developed by surface modification of a porous substrate with nano-structured nickel. The resulting electrodes achieve remarkably low overpotentials of 139 mV at 10 mAcm⁻² and 248 mV at 500 mAcm⁻². Further, scaled-up electrodes are implemented in a water-splitting electrolyser device exhibiting a stable voltage of 1.82 V to deliver a constant current density of 500 mA cm⁻² for over 17 days. Moreover, the role of the unique structures on electrochemical activity is systematically investigated by fractal analysis, involving computation of structure factors such as Minkowski connectivity, fractal dimension, and porosity using scanning electron microscope images. It is found that such structures offer higher surface area than typical layered double hydroxide structures due to morphological coherence that results in a superhydrophilic surface, while the base Ni layer boosts the charge transfer. This study demonstrates a Ni/NiFeCo(OH)_x heterostructure with highly porous morphology, a key to unlocking extremely efficient oxygen evolution reaction activity with exceptional stability. Moreover, fractal analysis is presented as a valuable tool to evaluate the electrochemical performance of catalysts for their structured morphology.     

In Situ Vertically Aligned MoS2 Arrays Electrodes for Complexing Agent-Free Bromine-Based Flow Batteries with High Power Density and Long Lifespan

Bromine-based flow batteries (Br-FBs) are highly competitive for stationary energy storage due to their high energy density and cost-effectiveness. However, adding bromine complexing agents (BCAs) to electrolytes slows down Br₂/Br⁻ reaction kinetics, causing higher polarization and lower power density of Br-FBs. Herein, in situ vertically aligned MoS₂ nanosheet arrays on traditional carbon felt substrates as electrodes to construct high power–density BCA-free Br-FBs are proposed. MoS₂ arrays exhibit strong adsorption capacity to bromine, which helps the electrodes capture and retain bromine species. Even without BCAs, the battery self-discharge caused by bromine diffusion is also inhibited. Moreover, the rate-determining step of Br₂/Br⁻ reactions is boosted and the vertically aligned array structure provides sufficient sites, motivating Br₂/Br⁻ reaction kinetics and decreasing the battery polarization. The capacity retention rate of the BCA-free Br-FB based on MoS₂ arrays-based electrodes reaches 46.34% after the 24-h standing test at 80 mA cm⁻², meeting the requirements of practical applications. Most importantly, this BCA-free Br-FB exhibits a high Coulombic efficiency of 97.00% and an ultralong cycle life of 1000 cycles at a high current density of 200 mA cm⁻². This work provides an available approach to developing advanced electrode materials for high power–density and long-lifespan Br-FBs.     

In-Situ Constructuring of Copper-Doped Bismuth Catalyst for Highly Efficient CO2 Electrolysis to Formate in Ampere-Level

CO₂ electrochemical reduction (CO₂RR) can mitigate environmental issues while providing valuable products, yet challenging in activity, selectivity, and stability. Here, a CuS-Bi₂S₃ heterojunction precursor is reported that can in situ reconstruct to Cu-doped Bismuth (CDB) electrocatalyst during CO₂RR. The CDB exhibits an industrial-compatible current density of −1.1 A cm⁻² and a record-high formate formation rate of 21.0 mmol h⁻¹ cm⁻² at −0.86 V versus the reversible hydrogen electrode toward CO₂RR to formate, dramatically outperforming currently reported catalysts. Importantly, the ultrawide potential region of 1050 mV with high formate Faradaic efficiency of over 90% and superior long-term stability for more than 100 h at −400 mA cm⁻² can also be realized. Experimental and theoretical studies reveal that the remarkable CO₂RR performance of CDB results from the doping effect of Cu which optimizes adsorption of the *OCHO and boosts the structural stability of metallic bismuth catalyst. This study provides valuable inspiration for the design of element-doping electrocatalysts to enhance catalytic activity and durability.     

Self-Supported Catalytic Electrode of CoW/Co-Foam Achieves Efficient Ammonia Synthesis at Ampere-Level Current Density

Conversion of air and water into valuable chemicals of ammonia (NH₃) by plasma activation and electrochemical reduction is a promising approach to achieve zero carbon-emission synthesis of NH₃. However, designing highly efficient electrochemical catalysts is one of the key challenges in accomplishing this strategy. Herein, a self-supported cobalt–tungsten alloy supported on cobalt foam (CoW/CF) is developed via a simple and efficient method at room temperature. Surprisingly, the catalyst exhibits ultra-high NH₃ partial current density (1559 mA cm⁻²), superior NH₃ yield rate (164.3 mg h⁻¹ cm⁻²), and high Faradaic efficiency (98.1%) under the condition of 0.2 M nitrate/nitrite, outperforming most of the reported values of electrosynthesis of NH₃ to the knowledge. The introduction of W makes the Co atom surface electron deficient, which can enhance the adsorption of NO_x⁻ and mitigate the excessive bonding of hydroxyl radicals (OH^*) generated during nitrite (NO₂^*) hydrogenation, thereby reducing the energy barrier of the potential-determining step. More interestingly, a scale-up reaction system is established, achieving an NH₃ yield rate of 4.771 g h⁻¹ and successfully converting the NH₃ in solution into solid NH₄Cl. The aforementioned progress significantly enhances the facilitation of NH₃ electrosynthesis industrialization.     

Construction of Stable Li2O-Rich Solid Electrolyte Interphase for Practical PEO-Based Li-Metal Batteries

Polyethylene oxide (PEO)-based solid polymer electrolytes (SPE) have garnered recognition as highly promising candidates for advanced lithium-metal batteries. However, the practical application of PEO-based SPE is hindered by its low critical current density (CCD) resulting from undesired dendrite growth. In this study, a PEO-based SPE that exhibits an ultra-high CCD (4 mA cm⁻²) is presented and enhanced lithium ionic conductivity through the incorporation of small amounts of P₂S₅ (PS). The crystalline Li₂O-rich and P/S-containing solid electrolyte interphase (SEI) is revealed by cryo-electron microscope (cryo-EM) and Time of flight secondary ion mass spectrometry (TOF-SIMS), which inhibits dendrite growth and adverse reactions between SPE and reductive lithium, thus offering a spherical growth behavior for dendrite-free lithium metal anode. Consequently, utilizing the PS-integrated SPE, a Li-Li symmetric cell demonstrates reduced resistance during operation, enabling stable cycles exceeding 200 hours at 0.5 mA cm⁻² and 0.5 mAh cm⁻², a stringent test condition for PEO-based electrolytes. Moreover, a Li/SPE/LiFePO₄ (LFP) pouch cell exhibits 80% capacity retention after 100 cycles with 50 µm Li and 30 µm PEO electrolyte, showcasing its potential for practical applications.     

Highly Stable Vertically Oriented 2H-NbS2 Nanosheets on Carbon Nanotube Films toward Superior Electrocatalytic Activity

2D metallic transition-metal dichalcogenides (MTMDCs) have attracted widespread research interest in the exploration of fundamental physical issues and energy-related fields. Although relatively high catalytic activity has been predicted theoretically in the new type MTMDCs-based electrocatalysts, their hydrogen evolution reaction (HER) performance is severely hampered by the insufficient catalytic stability due to structural degradation during long-time use and limited active sites in planar electrode structures. Herein, the scalable synthesis of vertically-oriented 2H-NbS₂ nanosheets is reported on low-cost carbon nanotube (CNT) film substrates by a facile chemical vapor deposition route. The 3D vertically-oriented 2H-NbS₂ nanosheets present abundant edge active sites and strong interface coupling with CNT thus possessing exceptional mechanical stability. These features impart the 3D nanosheets catalysts with remarkably low overpotentials of ≈55 mV at 10 mA cm⁻² and ultra-high exchange current density of ≈1445 µA cm⁻², and negligible performance degradation after 200 h operation at the large current density, which are superior to those of other TMDCs-based catalysts. This work hereby provides novel perspectives for the batch synthesis and application of 3D MTMDCs-based electrocatalysts with greatly improved electrocatalytic performance and stability that are needed for practical applications.     

10 mAh cm−2 Cathode by Roll-to-Roll Process for Low Cost and High Energy Density Li-Ion Batteries

Roll-to-roll dry processing enables the manufacture of high energy density and low cost Li-ion batteries (LIBs). However, as the thickness of the electrode fabricated by dry processing becomes greater (≥10 mAh cm⁻²), Li-ion migration resistance (R_ion) and charge-transfer resistance (R_ct) in the electrode dramatically increase due to long diffusion lengths for Li-ion and electron. Therefore, it is important to reduce diffusion lengths in the electrode to achieve high energy density LIBs. The dry electrode with a high areal capacity of 10 mAh cm⁻² and low resistance can be achieved by following three characteristics. First, the fibrillization behavior of polytetrafluoroethylene (PTFE) binder is controlled by adjusting the processing temperature during the fibrillization process, which enables uniform distribution of PTFE binder and carbon black (CB). Second, pore size/distribution and conducting network are engineered by multi-dimensional conducting agents, enhancing Li-ions and electrons transport in the electrode. Finally, the structural integrity of LiNi_0.80Co_0.15Al_0.05O₂ (NCA) particles is improved without fractures, which enables uniform pore distribution in the electrode by controlling the calendering step. The prepared 10 mAh cm⁻² dry electrode with homogeneous microstructure shows reduced R_ion and R_ct due to short diffusion lengths, which improves electrochemical performances in LIBs with a high volumetric energy density of ≈710 Wh L⁻¹.     

Fast Charge-Transfer Rates in Li-CO2 Batteries with a Coupled Cation-Electron Transfer Process

Li-CO₂ batteries with a high theoretical energy density (1876 Wh kg⁻¹) have unique benefits for reversible carbon fixation for energy storage systems. However, due to lack of stable and highly active catalysts, the long-term operation of Li-CO₂ batteries is limited to low current densities (mainly <0.2 mA cm⁻²) that are far from practical conditions. In this work, it is discovered that, with an ionic liquid-based electrolyte, highly active and stable transition metal trichalcogenide alloy catalysts of Sb_0.67Bi_1.33X₃ (X = S, Te) enable operation of the Li-CO₂ battery at a very high current rate of 1 mA cm⁻² for up to 220 cycles. It is revealed that: i) the type of chalcogenide (Te vs S) significantly affects the electronic and catalytic properties of the catalysts, ii) a coupled cation-electron charge transfer process facilitates the carbon dioxide reduction reaction (CO₂RR) occurring during discharge, and iii) the concentration of ionic liquid in the electrolyte controls the number of participating CO₂ molecules in reactions. A combination of these key factors is found to be crucial for a successful operation of the Li-CO₂ chemistry at high current rates. This work introduces a new class of catalysts with potential to fundamentally solve challenges of this type of batteries.     

Single-Atom Immobilization Boosting Oxygen Redox Kinetics of High-Entropy Perovskite Oxide Toward High-Performance Lithium-Oxygen Batteries

Understanding and modulating the unique electronic interaction between single-metal atoms and high entropy compounds are of great significance to enable their high-efficiency oxygen electrocatalysis for aprotic lithium-oxygen (Li-O₂) batteries. Herein, a novel bi-functional electrocatalyst is for the first time created by immobilizing single-atom ruthenium (Ru) on lanthanum-based high entropy perovskite oxide La(Mn_0.2Co_0.2Fe_0.2Ni_0.2Cr_0.2)O₃ (Ru@HEPO), which demonstrates high activity and stability in Li-O₂ batteries. The heteronuclear coordination between single-atom Ru and HEPO facilitates fast electron transfer from Ru to HEPO by establishing Ru-O-M (M stands for Mn, Co, Fe, Ni) bridges, which well redistributes electrons within the Ru@HEPO hence significantly improving its interfacial charge transfer kinetics and electrocatalytic activity. Additionally, the strong electron coupling between Ru and Mn atoms enhances the hybridization between Mn 3d and O 2p orbitals, which promotes the inherent affinity of Ru@HEPO toward the LiO₂ intermediate, thereby reducing the reaction energy barrier of the oxygen electrode. As a result, the Ru@HEPO-based Li-O₂ batteries deliver remarkable electrochemical performances, such as high energy efficiency (87.3% at 100 mA g⁻¹), excellent rate capability (low overpotential of 0.52 V at 100 mA g⁻¹) and durable cyclability (345 cycles at 300 mA g⁻¹). This work opens up a promising avenue for the development of high entropy-based electrocatalysts for Li-O₂ batteries by precisely tailoring the electronic distributions at an atomic scale.     

A Safe Organic/Inorganic Composite Anode for Sodium-Ion Batteries

Sodium-ion batteries (SIBs), based on hard carbon anodes and Na⁺-intercalation compound cathodes, have gained significant attention. Nonetheless, hard carbon anodes involve the storage of Na⁺ at a low potential, typically below 0.1 V (vs Na/Na⁺), which increases the risk of dendritic Na growth on the anode surface during overcharging. Herein, a safe organic/inorganic composite anode containing tetrasodium 3,4,9,10-perylenetetracarboxylate (Na₄PTC) and Metallic bismuth (Bi) with a weight ratio of 7:2, which exhibits an average potential of 0.7 V (vs Na⁺/Na) and a capacity of 150 mAh g⁻¹ is proposed. The electrode reaction involves a reversible coordination reaction within the organic host and alloying reactions within the metallic Bi component. Importantly, the organic component efficiently buffers the volume changes in Bi during the alloying reaction, while the metallic Bi enhances the electronic conductivity of the organic material. As a result, this composite anode shows high cycle stability and rate performance, even under high mass loadings ranging from 10 to 50 mg cm⁻². Furthermore, it is demonstrated that the Na-ion full cell, consisting of the composite anode and the Na₃V₂O₂(PO₄)₂F cathode, exhibits minimal capacity degradation over 100 cycles while maintaining a high areal capacity of 1.1 mA cm⁻².     

Dendrite Growth—Microstructure—Stress—Interrelations in Garnet Solid-State Electrolyte

This study illustrates how the microstructure of garnet solid-state electrolytes (SSE) affects the stress-state and dendrite growth. Tantalum-doped lithium lanthanum zirconium oxide (LLZTO, Li_6.4La₃Zr_1.4Ta_0.6O₁₂) is synthesized by powder processing and sintering (AS), or with the incorporation of intermediate-stage high-energy milling (M). The M compact displays higher density (91.5% vs 82.5% of theoretical), and per quantitative stereology, lower average grain size (5.4 ± 2.6 vs 21.3 ± 11.1 µm) and lower AFM-derived RMS surface roughness contacting the Li metal (45 vs 161 nm). These differences enable symmetric M cells to electrochemically cycle at constant capacity (0.1 mAh cm⁻²) with enhanced critical current density (CCD) of 1.4 versus 0.3 mA cm⁻². It is demonstrated that LLZTO grain size distribution and internal porosity critically affect electrical short-circuit failure, indicating the importance of electronic properties. Lithium dendrites propagate intergranularly through regions where LLZTO grains are smaller than the bulk average (7.4 ± 3.8 µm for AS in a symmetric cell, 3.1 ± 1.4 µm for M in a half-cell). Metal also accumulates in the otherwise empty pores of the sintered compact present along the dendrite path. Mechanistic modeling indicates that reaction and stress heterogeneities are interrelated, leading to current focusing and preferential plating at grain boundaries.     

Earth‐Abundant Iron Diboride (FeB2) Nanoparticles as Highly Active Bifunctional Electrocatalysts for Overall Water Splitting

Developing efficient, durable, and earth‐abundant electrocatalysts for both hydrogen and oxygen evolution reactions is important for realizing large‐scale water splitting. The authors report that FeB₂ nanoparticles, prepared by a facile chemical reduction of Fe²⁺ using LiBH₄ in an organic solvent, are a superb bifunctional electrocatalyst for overall water splitting. The FeB₂ electrode delivers a current density of 10 mA cm^?2 at overpotentials of 61 mV for hydrogen evolution reaction (HER) and 296 mV for oxygen evolution reaction (OER) in alkaline electrolyte with Tafel slopes of 87.5 and 52.4 mV dec^?1, respectively. The electrode can sustain the HER at an overpotential of 100 mV for 24 h and OER for 1000 cyclic voltammetry cycles with negligible degradation. Density function theory calculations demonstrate that the boron‐rich surface possesses appropriate binding energy for chemisorption and desorption of hydrogen‐containing intermediates, thus favoring the HER process. The excellent OER activity of FeB₂ is ascribed to the formation of a FeOOH/FeB₂ heterojunction during water oxidation. An alkaline electrolyzer is constructed using two identical FeB₂‐NF electrodes as both anode and cathode, which can achieve a current density of 10 mA cm^?2 at 1.57 V for overall water splitting with a faradaic efficiency of nearly 100%, rivalling the integrated state‐of‐the‐art Pt/C and RuO₂/C.     

Significant Efficiency Enhancement in Ultrathin CZTS Solar Cells by Combining Al Plasmonic Nanostructures Array and Antireflective Coatings

In the few past years, the economic and eco-friendly Cu₂ZnSnS₄ (CZTS) solar cells have caught lots of attentions. However, due to rather poor efficiency, identifying deficiencies and making improvements is necessary. In the present study, the performance improvement of ultrathin CZTS solar cells was achieved through (1) incorporation of anti-reflective coating (ARC) on the surface of cell and (2) embedding Al plasmonic nanostructures with different radius, periods, and vertical positions in the absorber layer. Various thicknesses of CZTS absorber layer were simulated optically and electrically using FDTD and DEVICE solver of Lumerical software. The reference solar cell consists of a 1.5-nm-thick CZTS absorber and exhibit an efficiency of up to 5.67%, short-circuit current density (Jsc) of 18.48 mA cm⁻² and open circuit voltage of 0.58 V. Result showed a remarkable performance enhancement of the solar cell in spite of a very thin absorber layer. For a 500-μm-thick CZTS solar cell with the assistance of ARC and embedding Al plasmonic nanostructures, the efficiency is increased to 7.45% due to an increase in Jsc to 22.62 mA cm⁻² with an open circuit voltage of 0.62 V.

     

Ni Strongly Coupled with Mo2C Encapsulated in Nitrogen‐Doped Carbon Nanofibers as Robust Bifunctional Catalyst for Overall Water Splitting

It is urgently required to develop highly efficient and stable bifunctional non‐noble metal electrocatalysts for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) for water splitting. In this study, a facile electrospinning followed by a post‐carbonization treatment to synthesize nitrogen‐doped carbon nanofibers (NCNFs) integrated with Ni and Mo₂C nanoparticles (Ni/Mo₂C‐NCNFs) as water splitting electrocatalysts is developed. Owing to the strong hydrogen binding energy on Mo₂C and high electrical conductivity of Ni, synergetic effect between Ni and Mo₂C nanoparticles significantly promote both HER and OER activities. The optimized hybrid (Ni/Mo₂C(1:2)‐NCNFs) delivers low overpotentials of 143 mV for HER and 288 mV for OER at a current density of 10 mA cm^?2. An alkaline electrolyzer with Ni/Mo₂C(1:2)‐NCNFs as catalysts for both anode and cathode exhibits a current density of 10 mA cm^?2 at a voltage of 1.64 V, which is only 0.07 V larger than the benchmark of Pt/C‐RuO₂ electrodes. In addition, an outstanding long‐term durability during 100 h testing without obvious degradation is achieved, which is superior to most of the noble‐metal‐free electrocatalysts reported to date. This work provides a simple and effective approach for the preparation of low‐cost and high‐performance bifunctional electrocatalysts for efficient overall water splitting.     

Direct Growth of Flower‐Like δ‐MnO2 on Three‐Dimensional Graphene for High‐Performance Rechargeable Li‐O2 Batteries

A challenge still remains to develop high‐performance and cost‐effective air electrode for Li‐O₂ batteries with high capacity, enhanced rate capability and long cycle life (100 times or above) despite recent advances in this field. In this work, a new design of binder‐free air electrode composed of three‐dimensional (3D) graphene (G) and flower‐like δ‐MnO₂ (3D‐G‐MnO₂) has been proposed. In this design, graphene and δ‐MnO₂ grow directly on the skeleton of Ni foam that inherits the interconnected 3D scaffold of Ni foam. Li‐O₂ batteries with 3D‐G‐MnO₂ electrode can yield a high discharge capacity of 3660 mAh g^?1 at 0.083 mA cm^?2. The battery can sustain 132 cycles at a capacity of 492 mAh g^?1 (1000 mAh g_carbon ^?1) with low overpotentials under a high current density of 0.333 mA cm^?2. A high average energy density of 1350 Wh Kg^?1 is maintained over 110 cycles at this high current density. The excellent catalytic activity of 3D‐G‐MnO₂ makes it an attractive air electrode for high‐performance Li‐O₂ batteries.     

Electroless Plating of Highly Efficient Bifunctional Boride‐Based Electrodes toward Practical Overall Water Splitting

Exploring highly‐efficient and low‐cost electrodes for both hydrogen and oxygen evolution reaction (HER and OER) is of primary importance to economical water splitting. Herein, a series of novel and robust bifunctional boride‐based electrodes are successfully fabricated using a versatile Et₂NHBH₃‐involved electroless plating (EP) approach via deposition of nonprecious boride‐based catalysts on various substrates. Owing to the unique binder‐free porous nodule structure induced by the hydrogen release EP reaction, most of the nonprecious boride‐based electrodes are highly efficient for overall water splitting. As a distinctive example, the Co‐B/Ni electrode can afford 10 mA cm^?2 at overpotentials of only 70 mV for HER and 140 mV for OER, and can also survive at large current density of 1000 mA cm^?2 for over 20 h without performance degradation in 1.0 m KOH. Several boride‐based two‐electrode electrolyzers can achieve 10 mA cm^?2 at low voltages of around 1.4 V. Moreover, the facile EP approach is economically viable for flexible and large size electrode production.     

Adsorption characteristics of sulfur powder by bamboo charcoal to restrain sulfur allergies

Exposures to particulate matter with a diameter of 2.5 μm or less (PM2.5) may influence the risk of birth defects and make you allergic, which causes serious harm to human health. Bamboo charcoal can adsorb harmful substances,that was of benefitto people’s health. In order to figure out the optimal adsorbtion condition and the intrinsic change of bamboo charcoal, five chemicals were adsorbed by bamboo charcoal and were analyzed by FT-IR. The optimal blast time was 80 min of Na₂SO₃, 100 min of Na₂S₂O₈, 20 min of Na₂SO₄, 120 min of Fe₂(SO₄)₃ and 60 min or 100 min of S. FT-IR spectra showed that bamboo charcoal had five characteristic peaks of SS stretch, H₂O stretch, OH stretch, CO stretch or CC stretch, and NO₂ stretch at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹, respectively. For Na₂SO₃, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 20 min. For Na₂S₂O₈, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 3430 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. For Na₂SO₄, the peaks at 3850 cm⁻¹, 3740 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. For Fe₂(SO₄)₃, the peaks at 3850 cm⁻¹, 3740 cm⁻¹, 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 120 min. For S, the peaks at 3850 cm⁻¹ and 3740 cm⁻¹ achieved the maximum at 40 min, the peaks at 1630 cm⁻¹ and 1530 cm⁻¹ achieved the maximum at 40 min. It proved that bamboo charcoal could remove sulfur powder from air to restrain sulfur allergies.     

On the Role of Bimetal-Doped BaCoO3−𝛿 Perovskites as Highly Active Oxygen Electrodes of Protonic Ceramic Electrochemical Cells

Protonic ceramic electrochemical cells (PCECs) hold great promise as an energy conversion and storage technology at lower temperatures (400–650 °C). However, the sluggish reaction kinetics at the oxygen electrode hinder the electrochemical activity of PCECs. Herein, a series of bifunctional oxygen electrodes based on bimetal-doped BaCoO_3-𝛿 (BCO) are reported. Doping hampers hexagonal perovskite formation and transforms BCO into cubic perovskite, improving water uptake and hydration abilities. Density functional theory calculations highlight the effects of phase transformation on the proton transport properties of oxygen electrodes. Notably, PCECs incorporating the bimetal-doped electrodes exhibit maximum power densities of 3.15 W cm⁻² (650 °C) and 2.25 W cm⁻² (600 °C) in fuel cell mode, as well as a current density of 4.21 A cm⁻² at 1.3 V (650 °C) in electrolysis cell mode, setting record-high values. The findings provide insights into the rational design of bifunctional oxygen electrodes for high-performance PCECs.