Steel Anti-Corrosion Strategy Enables Long-Cycle Zn Anode

The progress of aqueous zinc batteries (AZBs) is limited by the poor cycling life due to Zn anode instability, including dendrite growth, surface corrosion, and passivation. Inspired by the anti-corrosion strategy of steel industry, a compounding corrosion inhibitor (CCI) is employed as the electrolyte additive for Zn metal anode protection. It is shown that CCI can spontaneously generate a uniform and ≈30 nm thick solid-electrolyte interphase (SEI) layer on Zn anode with a strong adhesion via Zn O bonding. This SEI layer efficiently prohibits water corrosion and guides homogeneous Zn deposition without obvious dendrite formation. This enables reversible Zn deposition and dissolution for over 1100 h under the condition of 1 mA cm⁻² and 1 mAh cm⁻² in symmetric cells. The Zn-MnO₂ full cells with CCI-modified electrolyte deliver an ultralow capacity decay rate (0.013% per cycle) at 0.5 A g⁻¹ over 1000 cycles. Such an innovative strategy paves a low-cost way to achieve AZBs with long lifespan.     

Boosting Ion Diffusion and Charge Transfer by Zincophilic Accordion Arrays to Achieve Ultrafast Aqueous Zinc Metal Batteries

A key challenge to apply aqueous zinc metal batteries (AZMBs) as next-generation energy storage device is to improve the rechargeability at high current densities, which is needed to circumvent slowly ion diffusion in anode and sluggish charge transfer of Zn²⁺. Herein, a zincophilic accordion array derived from MOF is developed as zinc host for simultaneously boosted ion diffusion and charge transfer. The designed host is prepared by etching and disproportionation reactions, the abundant zincophilic Sn sites with nano-size uniform disperse on accordion arrays nanosheets (Sn-AA). Then a composite Zn anode (Sn-AA@Zn) is obtained by compacting Sn-AA host with zinc power (Zn-P). The Sn-AA@Zn anode has an ultra-low activation energy (37.1 kJ mol⁻¹) and nucleation overpotential (10 mV), achieving fast charge transfer of Zinc deposition. In addition, the cycle life of the symmetric cell with Sn-AA@Zn anode exceeds 13 000 cycles at 50 mA cm⁻², which is 32 times than that of the Zn-P anode. And the full cell with Sn-AA@Zn anode and MnO₂ cathode maintains a capacity of 122 mAh g⁻¹ after 5000 cycles at 5 Ag⁻¹. Hopefully, the 3D anode based on Sn-AA@Zn accordion array and Zn-P has significantly improved the rechargeability of AZMB at high current density.     

An Iodine-Chemisorption Binder for High-Loading and Shuttle-Free Zn–Iodine Batteries

Aqueous zinc–iodine (Zn–I₂) batteries have attracted considerable research interest as an alternative energy storage system due to their high specific capacity, intrinsic safety, and low cost. However, the notorious shuttle effect of soluble polyiodides causes severe capacity loss and poor electrochemical reversibility, restricting their practical usage. Herein, this study reports a bifunctional binder (polyacrylonitrile copolymer, as known as LA133) with strong iodine-chemisorption capability for aqueous Zn–I₂ batteries to suppress polyiodide shuttling. From both calculation and experimental data, this study reveals that the amide and carboxyl groups in LA133 binder can strongly bond to polyiodides, significantly immobilizing them at cathode side. As a result, fewer byproducts, slower hydrogen evolution, and lesser Zn dendrite in the Zn–I₂ battery are observed. Consequently, the battery shows high specific capacity (202.8 mAh g⁻¹) with high iodine utilization efficiency (96.1%), and long cycling lifespan (2700 cycles). At the high mass loading of 7.82 mg cm⁻², the battery can still retain 83.3% of its initial capacity after 1000 cycles. The specific capacity based on total cathode slurry mass reaches 71.2 mAh g⁻¹, higher than most of the recent works. The strategy opens a new avenue to address the shuttling challenge of Zn–I₂ batteries through bifunctional binder.     

Going beyond Intercalation Capacity of Aqueous Batteries by Exploiting Conversion Reactions of Mn and Zn electrodes for Energy‐Dense Applications

The recent trend in zinc (Zn) anode aqueous batteries has been to explore layered structures like manganese dioxides and vanadium oxides as Zn‐ion intercalation hosts. These structures, although novel, face limitations like their layered counterparts in lithium (Li)‐ion batteries, where the capacity is limited to the host's intercalation capacity. In this paper, a new strategy is proposed in enabling new generation of energy dense aqueous‐based batteries, where the conversion reactions of rock salt/spinel manganese oxides and carbon nanotube‐nested nanosized Zn electrodes are exploited to extract significantly higher capacity compared to intercalation systems. Accessing the conversion reactions allows to achieve high capacities of 750 mAh g^?1 (≈30 mAh cm^?2) from manganese oxide (MnO) and 810 mAh g^?1 (≈30 mAh cm^?2) from nanoscale Zn anodes, respectively. The high areal capacities help to attain unprecedented energy densities of 210 Wh per L‐cell and 320 Wh per kg‐total (398 Wh per kg‐active) from aqueous MnO|CNT‐Zn batteries, which allows an assessment of its viable use in a small‐scale automobile.     

Coordination Engineering of N,O Co-Doped Cu Single Atom on Porous Carbon for High Performance Zinc Metal Anodes

Traditional challenges of poor cycling stability and low Coulombic efficiency in Zinc (Zn) metal anodes have limited their practical application. To overcome these issues, this work introduces a single metal-atom design featuring atomically dispersed single copper (Cu) atoms on 3D nitrogen (N) and oxygen (O) co-doped porous carbon (CuNOC) as a highly reversible Zn host. The CuNOC structure provides highly active sites for initial Zn nucleation and further promotes uniform Zn deposition. The 3D porous architecture further mitigates the volume changes during the cycle with homogeneous Zn²⁺ flux. Consequently, CuNOC demonstrates exceptional reversibility in Zn plating/stripping processes over 1000 cycles at 2 and 5 mA cm⁻² with a fixed capacity of 1 mAh cm⁻², while achieving stable operation and low voltage hysteresis over 700 h at 5 mA cm⁻² and 5 mAh cm⁻². Furthermore, density functional theory calculations show that co-doping N and O on porous carbon with atomically dispersed single Cu atoms creates an efficient zincophilic site for stable Zn nucleation. A full cell with the CuNOC host anode and high loading V₂O₅ cathode exhibits outstanding rate-capability up to 5 A g⁻¹ and a stable cycle life over 400 cycles at 0.5 A g⁻¹.     

An Ultrastable Presodiated Titanium Disulfide Anode for Aqueous “Rocking‐Chair” Zinc Ion Battery

Rechargeable aqueous Zn‐based batteries are attractive candidates as energy storage technology, but the uncontrollable Zn dendrites, low stripping/plating coulombic efficiency, and inefficient utilization of Zn metal limit the battery reliability and energy density. Herein, for the first time, a novel presodiated TiS₂ (Na_0.14TiS₂) is proposed and investigated as an intercalated anode for aqueous Zn‐ion batteries, showing a capacity of 140 mAh g^?1 with a suitable potential of 0.3 V (vs Zn²⁺/Zn) at 0.05 A g^?1 and superior cyclability of 77% retention over 5000 cycles at 0.5 A g^?1. The remarkable performance originates from the buffer phase formation of Na_0.14TiS₂ after chemically presodiating TiS₂, which not only improves the structural reversibility and stability but also enhances the diffusion coefficient and electronic conductivity, and lowers cation migration barrier, as evidenced by a series of experimental and theoretical studies. Moreover, an aqueous “rocking‐chair” Zn‐ion full battery is successfully demonstrated by this Na_0.14TiS₂ anode and ZnMn₂O₄ cathode, which delivers a capacity of 105 mAh g^?1 (for anode) with an average voltage of 0.95 V at 0.05 A g^?1 and preserves 74% retention after 100 cycles at 0.2 A g^?1, demonstrating the feasibility of Zn‐ion full batteries for energy storage applications.     

Hydrated Intercalation for High‐Performance Aqueous Zinc Ion Batteries

Aqueous zinc ion batteries (AZIBs) are steadily gaining attention based on their attractive merits regarding cost and safety. However, there are many obstacles to overcome, especially in terms of finding suitable cathode materials and elucidating their reaction mechanisms. Here, a mixed‐valence vanadium oxide, V₆O₁₃, that functions as a stable cathode material in mildly acidic aqueous electrolytes is reported. Paired with a zinc metal anode, this material exhibits performance metrics of 360 mAh g^?1 at 0.2 A g^?1, 92% capacity retention after 2000 cycles, and 145 mAh g^?1 at a current density of 24.0 A g^?1. A combination of experiments and density functional theory calculations suggests that hydrated intercalation, where water molecules are cointercalated with Zn ions upon discharge, accounts for the aforementioned electrochemical performance. This intercalation mechanism facilitates Zn ion diffusion throughout the host lattice and electrode–electrolyte interface via electrostatic shielding and concurrent structural stabilization. Through a correlation of experimental data and theoretical calculations, the promise of utilizing hydrated intercalation as a means to achieve high‐performance AZIBs is demonstrated.     

A Room‐Temperature Molten Hydrate Electrolyte for Rechargeable Zinc–Air Batteries

Aqueous Zn‐based batteries are attracting extensive interest because of their economic feasibility and potentially high energy density. However, poor rechargeability of Zn anode in conventional electrolytes resulting from dendrite formation and self‐corrosion hinders their practical implementation. Herein, a Zn molten hydrate composed of inorganic Zn salt and water is demonstrated as an advantageous electrolyte for solving these issues. In this electrolyte, dendrite‐free Zn deposition/dissolution reaction with a high Coulombic efficiency (≈99%) as well as long‐term stability, free from CO₂ poisoning are realized. The resultant Zn–air cell exhibits a reversible capacity of 1000 mAh g_(catalyst)^?1 over 100 cycles at 30 °C. Combined with the intrinsic safety associated with aqueous chemistry and cost benefit of the raw material, the present Zn–air battery makes a strong candidate for large‐scale energy storage.     

Pseudo‐Zn–Air and Zn‐Ion Intercalation Dual Mechanisms to Realize High‐Areal Capacitance and Long‐Life Energy Storage in Aqueous Zn Battery

Aqueous zinc batteries are considered as promising alternatives to lithium ion batteries owing to their low cost and high safety. However, the developments of state‐of‐the‐art zinc‐ion batteries (ZIB) and zinc–air batteries (ZAB) are limited by the unsatisfied capacities and poor cycling stabilities, respectively. It is of significance in utilizing the long‐cycle life of ZIB and high capacity of ZAB to exploit advanced energy storage systems. Herein, a bulk composite of graphene oxide and vanadium oxide (V₅O₁₂·6H₂O) as cathode material for aqueous Zn batteries in a mild electrolyte is employed. The battery performance is demonstrated to arise from a combination of the reversible cations insertion/extraction in vanadium oxide and especially the electrochemical redox reactions on the surface functional groups of graphene oxide (named as pseudo‐Zn–air mechanism). Along with adjusting the hydroxyl content on the surface of graphene oxide, the specific capacity is significantly increased from 342 mAh g^?1 to a maximum of 496 mAh g^?1 at 100 mA g^?1. The surface‐controlled kinetics occurring in the bulk composite ensure a high areal capacity of 10.6 mAh cm^?2 at a mass loading of 26.5 mg cm^?2, and a capacity retention of 84.7% over 10 000 cycles at a high current density of 10 A g^?1.     

Unveiling The Mechanism of The Dendrite Nucleation and Growth in Aqueous Zinc Ion Batteries

Aqueous zinc ion batteries (ZIBs) exhibit great potential for next-generation energy storage devices. However, significant challenges exist, including the uncontrollable formation of Zn dendrite and side reactions during zinc stripping and plating. The mechanism of Zn dendrite nucleation has yet to be fully understood. In this work, the first principles simulations are used to investigate the Zn dendrite formation process. The unintentionally adsorbed O²⁻ and OH⁻ ions are the inducing factors for Zn dendrite nucleation and growth on the Zn (0001) plane due to significantly increased Zn diffusion barriers. A top-down method is demonstrated to suppress the dendrite using delaminated V₂CT_x to capture O²⁻ and OH⁻ ions thanks to reduced Zn diffusion barriers. The experimental results revealed significantly suppressed Zn dendrite nucleation and growth, resulting in a layer-by-layer deposit/stripping of Zn. Based on the electrochemical evaluations, the V₂CT_x-coated Zn composite delivers a high coulombic efficiency of 99.3% at 1.0 mAh cm⁻². Furthermore, the full cell achieves excellent cyclic performance of 93.6% capacity retention after 2000 cycles at 1 A g⁻¹. This strategy has broad scalability and can be widely applied in designing metallic anodes for rechargeable batteries.     

Toward a Reversible Mn4+/Mn2+ Redox Reaction and Dendrite‐Free Zn Anode in Near‐Neutral Aqueous Zn/MnO2 Batteries via Salt Anion Chemistry

Rechargeable aqueous Zn/MnO₂ batteries are very attractive large‐scale energy storage technologies, but still suffer from limited cycle life and low capacity. Here the novel adoption of a near‐neutral acetate‐based electrolyte (pH ≈ 6) is presented to promote the two‐electron Mn⁴⁺/Mn²⁺ redox reaction and simultaneously enable a stable Zn anode. The acetate anion triggers a highly reversible MnO₂/Mn²⁺ reaction, which ensures high capacity and avoids the issue of structural collapse of MnO₂. Meanwhile, the anode‐friendly electrolyte enables a dendrite‐free Zn anode with outstanding stability and high plating/stripping Coulombic efficiency (99.8%). Hence, a high capacity of 556 mA h g^?1, a lifetime of 4000 cycles without decay, and excellent rate capability up to 70 mA cm^?2 are demonstated in this new near‐neutral aqueous Zn/MnO₂ battery by simply manipulating the salt anion in the electrolyte. The acetate anion not only modifies the surface properties of MnO₂ cathode but also creates a highly compatible environment for the Zn anode. This work provides a new opportunity for developing high‐performance Zn/MnO₂ and other aqueous batteries based on the salt anion chemistry.     

A Safe Organic/Inorganic Composite Anode for Sodium-Ion Batteries

Sodium-ion batteries (SIBs), based on hard carbon anodes and Na⁺-intercalation compound cathodes, have gained significant attention. Nonetheless, hard carbon anodes involve the storage of Na⁺ at a low potential, typically below 0.1 V (vs Na/Na⁺), which increases the risk of dendritic Na growth on the anode surface during overcharging. Herein, a safe organic/inorganic composite anode containing tetrasodium 3,4,9,10-perylenetetracarboxylate (Na₄PTC) and Metallic bismuth (Bi) with a weight ratio of 7:2, which exhibits an average potential of 0.7 V (vs Na⁺/Na) and a capacity of 150 mAh g⁻¹ is proposed. The electrode reaction involves a reversible coordination reaction within the organic host and alloying reactions within the metallic Bi component. Importantly, the organic component efficiently buffers the volume changes in Bi during the alloying reaction, while the metallic Bi enhances the electronic conductivity of the organic material. As a result, this composite anode shows high cycle stability and rate performance, even under high mass loadings ranging from 10 to 50 mg cm⁻². Furthermore, it is demonstrated that the Na-ion full cell, consisting of the composite anode and the Na₃V₂O₂(PO₄)₂F cathode, exhibits minimal capacity degradation over 100 cycles while maintaining a high areal capacity of 1.1 mA cm⁻².     

Nanoporous CaCO3 Coatings Enabled Uniform Zn Stripping/Plating for Long‐Life Zinc Rechargeable Aqueous Batteries

Zn‐based batteries are safe, low cost, and environmentally friendly, as well as delivering the highest energy density of all aqueous battery systems. However, the application of Zn‐based batteries is being seriously hindered by the uneven electrostripping/electroplating of Zn on the anodes, which always leads to enlarged polarization (capacity fading) or even cell shorting (low cycling stability). How a porous nano‐CaCO₃ coating can guide uniform and position‐selected Zn stripping/plating on the nano‐CaCO₃‐layer/Zn foil interfaces is reported here. This Zn‐deposition‐guiding ability is mainly ascribed to the porous nature of the nano‐CaCO₃‐layer, since similar functionality (even though relatively inferior) is also found in Zn foils coated with porous acetylene black or nano‐SiO₂ layers. Furthermore, the potential application of this strategy is demonstrated in Zn|ZnSO₄+MnSO₄|CNT/MnO₂ rechargeable aqueous batteries. Compared with the ones with bare Zn anodes, the battery with a nano‐CaCO₃‐coated Zn anode delivers a 42.7% higher discharge capacity (177 vs 124 mAh g^?1 at 1 A g^?1) after 1000 cycles.     

Ultrathin Reed Membranes: Nature's Intimate Ion-Regulation Skins Safeguarding Zinc Metal Anodes in Aqueous Batteries

The practical realization of aqueous zinc-ion batteries relies crucially on effective interphases governing Zn electrodeposition chemistry. In this study, an innovative solution by introducing an ultrathin (≈2 µm) biomass membrane as an intimate artificial interface, functioning as nature's ion-regulation skin to protect zinc metal anodes is proposed. Capitalizing on the inherent properties of natural reed membrane, including multiscale ion transport tunnels, abundant ─OH groups, and remarkable mechanical integrity, the reed membrane demonstrates efficacy in regulating uniform and rapid Zn²⁺ transport, promoting desolvation, and governing Zn (002) plane electrodeposition. Importantly, a unique in situ electrochemical Zn─O bond formation mechanism between the reed membrane and Zn electrode upon cycling is elucidated, resulting in a robustly adhered interface covering on the zinc anode surface, ultimately ensuring remarkable dendrite-free and highly reversible Zn anodes. Consequently, the approach achieves a prolonged cycle life for over 1450 h at 3 mA cm⁻²/1.5 mAh cm⁻² in symmetric Zn//Zn cells. Moreover, exceptional cyclic performance (88.95%, 4000 cycles) is obtained in active carbon-based cells with an active mass loading of 5.8 mg cm⁻². The approach offers a cost-effective and environmentally friendly strategy for achieving stable and reversible zinc anodes for aqueous batteries.     

Robust Hybrid Solid Electrolyte Interface Induced by Zn-Poor Electric Double Layer for A Highly Reversible Zinc Anode

Aqueous Zn-ion batteries (AZIBs) show great potential in new energy storage devices due to low cost, inherent safety, and environmental friendliness. However, the severe dendrites and side reactions on the anode greatly constrain their practical application. Herein, a novel colloidal electrolyte composed of ZnSO₄ and sodium carboxymethyl cellulose (CMC-Na) has been developed for inhibiting dendrite growth on Zn anode. Molecular dynamics (MD) simulation confirms that CMC-Na alters the electric double layer (EDL) structure of Zn anode surface to reduce the content of water and SO₄²⁻ and inhibit side reactions. More importantly, an organic/inorganic hybrid solid electrolyte interface (SEI) layer is in situ constructed during the cycling, which enables ultrastable Zn plating/stripping (> 2000 h) under high current density (5 mA cm⁻², 5 mAh cm⁻²) and high coulombic efficiency (99.8%) for more than 1000 cycles. Meanwhile, zinc-ion hybrid capacitors (ZIHCs) with the colloidal electrolyte exhibit a favorable capacitance retention of 97% after 15000 cycles at the current density of 2 A g⁻¹. Even at a high current density of 5 A g⁻¹, it still has a capacitance retention of 96% after 30000 cycles. This study presents a novel electrolyte strategy for the formation of ultrastable electrode-electrolyte interfaces in AZIBs.     

H2V3O8 Nanowire/Graphene Electrodes for Aqueous Rechargeable Zinc Ion Batteries with High Rate Capability and Large Capacity

Aqueous rechargeable zinc ion batteries are considered a promising candidate for large‐scale energy storage owing to their low cost and high safety nature. A composite material comprised of H₂V₃O₈ nanowires (NWs) wrapped by graphene sheets and used as the cathode material for aqueous rechargeable zinc ion batteries is developed. Owing to the synergistic merits of desirable structural features of H₂V₃O₈ NWs and high conductivity of the graphene network, the H₂V₃O₈ NW/graphene composite exhibits superior zinc ion storage performance including high capacity of 394 mA h g^?1 at 1/3 C, high rate capability of 270 mA h g^?1 at 20 C and excellent cycling stability of up to 2000 cycles with a capacity retention of 87%. The battery offers a high energy density of 168 W h kg^?1 at 1/3 C and a high power density of 2215 W kg^?1 at 20 C (calculated based on the total weight of H₂V₃O₈ NW/graphene composite and the theoretically required amount of Zn). Systematic structural and elemental characterization confirm the reversible Zn²⁺ and water cointercalation electrochemical reaction mechanism. This work brings a new prospect of designing high‐performance aqueous rechargeable zinc ion batteries for grid‐scale energy storage.     

High‐Performance Reversible Aqueous Zn‐Ion Battery Based on Porous MnOx Nanorods Coated by MOF‐Derived N‐Doped Carbon

Rechargeable aqueous zinc‐ion batteries (ZIBs) have been emerging as potential large‐scale energy storage devices due to their high energy density, low cost, high safety, and environmental friendliness. However, the commonly used cathode materials in ZIBs exhibit poor electrochemical performance, such as significant capacity fading during long‐term cycling and poor performance at high current rates, which significantly hinder the further development of ZIBs. Herein, a new and highly reversible Mn‐based cathode material with porous framework and N‐doping (MnO_x@N‐C) is prepared through a metal–organic framework template strategy. Benefiting from the unique porous structure, conductive carbon network, and the synergetic effect of Zn²⁺ and Mn²⁺ in electrolyte, the MnO_x@N‐C shows excellent cycling stability, good rate performance, and high reversibility for aqueous ZIBs. Specifically, it exhibits high capacity of 305 mAh g^?1 after 600 cycles at 500 mA g^?1 and maintains achievable capacity of 100 mAh g^?1 at a quite high rate of 2000 mA g^?1 with long‐term cycling of up to 1600 cycles, which are superior to most reported ZIB cathode materials. Furthermore, insight into the Zn‐storage mechanism in MnO_x@N‐C is systematically studied and discussed via multiple analytical methods. This study opens new opportunities for designing low‐cost and high‐performance rechargeable aqueous ZIBs.     

Inducing the Preferential Growth of Zn (002) Plane for Long Cycle Aqueous Zn-Ion Batteries

Uncontrolled growth of Zn dendrites is the main reason for the short-circuit failure of aqueous Zn-ion batteries. Using electrolyte additives to manipulate the crystal growth is one of the most convenient strategies to mitigate the dendrite issue. However, most additives would be unstable during cycling due to the structural reconstruction of the deposition layer. Herein, it is proposed to use 1-butyl-3-methylimidazolium cation (BMIm⁺ ion) as an electrolyte additive, which could steadily induce the preferential growth of (002) plane and inhibit the formation of Zn dendrites. Specifically, BMIm⁺ ion will be preferentially adsorbed on (100) and (101) planes of Zn anodes, forcing Zn²⁺ ion to deposit on the (002) plane, thus inducing the preferential growth of the (002) plane and forming a flat and compact deposition layer. As a result, the Zn anode cycles for 1000 h at10 mA cm⁻² and 10 mAh cm⁻² as well as a high Coulombic efficiency of 99.8%. Meanwhile, the NH₄V₄O₁₀||Zn pouch cell can operate stably for 240 cycles at 0.4 A g⁻¹. The BMIm⁺ ion additive keeps a stable effect on the structural reconstruction of the Zn anode during the prolonged cycling.     

Multiscale Micro-Nano Hierarchical Porous Germanium with Self-Adaptive Stress Dispersion for Highly Robust Lithium-Ion Batteries Anode

The manipulation of stress in high-capacity microscale alloying anode materials, which undergo significant volumetric variation during cycling, is crucial prerequisite for improved their cycling capability. In this work, an innovative structural design strategy is proposed for scalable fabrication of a unique 3D highly porous micro structured germanium (Ge) featuring micro-nano hierarchical architecture as viable anode for high-performance lithium-ion batteries (LIBs). The resultant micro-sized Ge, consisting of interconnected nanoligaments and bicontinuous nanopores, is endowed with high activity, decreased Li⁺ diffusion distance and alleviated volume variation, appealing as an ideal platform for in-depth understanding the relationship between structural design and stress evolution. Such a micro-sized Ge being highly porous delivers a record high initial Coulombic efficiency of 92.5%, large volumetric capacity of 2,421 mAh cm⁻³ at 1.2 mA cm⁻², exceptional rate capability (805.6 mAh g⁻¹ at 10 Ag⁻¹) and cycling stability (over 90% capacity retention after 1000 cycles even at 5 A g⁻¹), largely outperforming the reported Ge-based anodes for LIBs. Furthermore, its underlying Li storage mechanism and stress dispersion behavior are explicitly revealed by combined substantial in situ/ex situ experimental characterizations and theoretical computation. This work provides novel insights into the rational design of high-performance and durable alloying anodes toward high-energy LIBs.     

Sulfur/Oxygen Codoped Porous Hard Carbon Microspheres for High‐Performance Potassium‐Ion Batteries

Potassium‐ion batteries (KIBs) are very promising alternatives to lithium‐ion batteries (LIBs) for large‐scale energy storage. However, traditional carbon anode materials usually show poor performance in KIBs due to the large size of K ions. Herein, a carbonization‐etching strategy is reported for making a class of sulfur (S) and oxygen (O) codoped porous hard carbon microspheres (PCMs) material as a novel anode for KIBs through pyrolysis of the polymer microspheres (PMs) composed of a liquid crystal/epoxy monomer/thiol hardener system. The as‐made PCMs possess a porous architecture with a large Brunauer–Emmett–Teller surface area (983.2 m² g^?1), an enlarged interlayer distance (0.393 nm), structural defects induced by the S/O codoping and also amorphous carbon nature. These new features are important for boosting potassium ion storage, allowing the PCMs to deliver a high potassiation capacity of 226.6 mA h g^?1 at 50 mA g^?1 over 100 cycles and be displaying high stability by showing a potassiation capacity of 108.4 mA h g^?1 over 2000 cycles at 1000 mA g^?1. The density functional theory calculations demonstrate that S/O codoping not only favors the adsorption of K to the PCMs electrode but also reduces its structural deformation during the potassiation/depotassiation. The present work highlights the important role of hierarchical porosity and S/O codoping in potassium storage.