Optical,emission, and excitation dynamics of Eu3+-doped bismuth-based phosphate glass for visible display laser applications

Eu³⁺-doped-bismuth-based phosphate glasses with chemical equation (60 − x)P₂O₅–20Bi₂O₃−10Na₂CO₃–10SrF₂–xEu₂O₃ (PBNSEu), (where x = 0, 0.1, 0.5, 1.0, 1.5 and 2 mol%) were fabricated using the melt-quenching method. Obtain X-ray diffraction (XRD), energy-dispersive X-ray (EDAX), and Fourier transform infrared (FTIR) spectra were used to characterize the structure of the prepared PBNSEu glass. The J–O (Judd–Ofelt) intensity parameters (Ω₂, Ω₄) were estimated using photoluminescence emission spectra. When excited with a xenon lamp at λ_exc = 394 nm, the most intense red-emission transition occurred at ~612 nm (⁵D₀→⁷F₂). J–O intensity parameters were used to calculate radiative properties, whereas the radiative branching ratio (β_R), radiative transition probability (A_R), radiative lifetime (τ_R), and total radiative transition rate (A_τ) were calculated for the transitions ⁵D₀→⁷F_J (where J = 0–4) and were obtained in the emission spectra for europium ion-doped in the current glass. Using the CIE1931 chromaticity coordinates axes, the colours of various concentrations of Eu³⁺ ion-doped PBNS glass were evaluated using the emission spectra. Temperature-dependent luminescence spectra were recorded for the optimized PBNSEu20 glass to calculate the activation energy. These results strongly suggested red components in w-LEDs and visible display laser applications.     

Investigation of the spectral characteristics of Sm3+ ions in lead borosilicate glass for photonic applications

Different concentrations of Sm₂O₃-doped lead borosilicate glass were synthesized using a melt–quenching method and their characteristics were analyzed using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy absorption, emission, and decay curves. From the XRD patterns, the noncrystalline nature of titled glass was confirmed. The structural groups that existed in the host glass were observed from FTIR spectra. The Judd–Ofelt (JO) intensity parameters and oscillator strengths were derived from the absorption spectra and compared with various reported systems. The excitation luminescence levels of the Sm³⁺ ion radiative properties were further computed using the JO intensity parameters. Effective bandwidth, emission cross-sections (σ_e), and several lasing properties were assessed from emission spectra and compared with other reported glass systems. The decay curves of the ⁴G_5/2 level of Sm³⁺ ion were also been measured and examined. Additionally, the colour coordinates of the Commission International de I'Éclairage chromaticity were assessed. The titled glass were suitable for visible reddish orange luminescence devices based on all obtained parameters.     

Photoluminescent properties of Eu3+‐Eu2+ activated MAl2SixO2x + 4 (M = Mg,Ca, Sr,Ba) phosphors prepared in air

In this paper, MAl₂Si_xO_2x+4:Eu²⁺/Eu³⁺ (Eu²⁺ + Eu³⁺ = 2%, molar ratio; M = Mg, Ca, Sr, Ba; x = 0, 0.5, 1, 1.5, 2) phosphors with different SiO₂ concentrations (the ratio of SiO₂ to MAl₂O₄ is n%, n = 0, 50, 100, 150, 200, respectively) were prepared by high‐temperature solid‐state reaction under atmospheric air conditions. Their structures and photoluminescent properties were systematically researched. The results indicate that Eu³⁺ ions have been reduced and Eu²⁺ ions are obtained in air through the self‐reduction mechanism. The alkaline earth metal ions and doping SiO₂ strongly affect the crystalline phase and photoluminescent properties of samples, including microstructures, relative intensity of Eu²⁺ to Eu³⁺, location of emission lines/bands. It is interesting and important that the emission color and intensities of europium‐doped various phosphors which consist of aluminosilicate matrices prepared under atmospheric air conditions could be modulated by changing the kinds of alkaline earth metal and the content of SiO₂.     

Mechanoluminescence properties of SrAl2O4:Eu2+ phosphor by combustion synthesis

In this paper, europium‐doped strontium aluminate (SrAl₂O₄:Eu²⁺) phosphors were synthesized using a combustion method with urea as a fuel at 600°C. The phase structure, particle size, surface morphology and elemental analysis were studied using X‐ray diffractometry (XRD), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX) and Fourier transform infrared (FTIR) spectra. The EDX and FTIR spectra confirm the elements present in the SrAl₂O₄:Eu²⁺ phosphor. The optical properties of SrAl₂O₄:Eu²⁺ phosphors were investigated by photoluminescence (PL) and mechanoluminescence (ML). The excitation and emission spectra showed a broad band with peaks at 337 and 515 nm, respectively. The ML intensities of SrAl₂O₄:Eu²⁺ phosphor increased proportionally with the increase in the height of the mechanical load, which suggests that this phosphor could be used in stress sensors. The CIE colour chromaticity diagram and ML spectra confirm that the SrAl₂O₄:Eu²⁺ phosphor emitted green coloured light. Copyright © 2015 John Wiley & Sons, Ltd.     

Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Spectral investigations on Eu3+,Sm3+‐doped and Sm3+/Eu3+ co‐doped potassium‐fluoro‐phosphate glass emitting intense orange‐red for lighting applications

Potassium fluoro‐phosphate (KFP) glass singly doped with different concentrations of europium (Eu³⁺) or samarium (Sm³⁺) or co‐doped (Sm³⁺/Eu³⁺) was prepared, and their luminescence spectra were investigated. The phase composition of the product was verified by X‐ray diffraction analysis. Optical transition properties of Eu³⁺ in the studied potassium phosphate glass were evaluated in the framework of the Judd–Ofelt theory. The radiative transition rates (A_R), fluorescence branching ratios (β), stimulated emission cross‐sections (σ_e) and lifetimes (τ_exp) for certain transitions or levels were evaluated. Red emission of Eu³⁺ was exhibited mainly by the ⁵D₀→⁷F₂ transition located at 612 nm. Concentration quenching and energy transfer were observed from fluorescence spectra and decay curves, respectively. It was found that the lifetimes of the ⁵D₀ level increased with increase in concentration and then decreased. By co‐doping with Sm³⁺, energy transfer from Sm³⁺ to Eu³⁺ occurred and contributed to the enhancement in emission intensity. Intense orange‐red light emission was obtained upon sensitizing with Sm³⁺ in KFP glass. This approach shows significant promise for use in reddish‐orange lighting applications. The optimized properties of the Sm³⁺/Eu³⁺ co‐doped potassium phosphate glass might be promising for optical materials.     

Tunable emission from LiBaBO3:Eu3+;Bi3+ phosphor for solid‐state lighting

Europium (Eu³⁺) and bismuth (Bi³⁺) co‐activated LiBaBO₃ powder phosphors were synthesized by a solid‐state reaction and the structure, particle morphology, optical and photoluminescent properties were investigated. X‐Ray diffraction patterns of the LiBaBO₃ phosphors crystallized in a pure monoclinic phase, i.e. there were no secondary phases due to either incidental impurities or undecomposed starting materials. Scanning electron microscopy images showed that the powders were made up of fluffy needle‐like particles that were randomly aligned. The band‐gap of the LiBaBO₃ host was estimated to be 3.33 eV from the UV/vis absorption data. Blue emission was observed from the LiBaBO₃ host, which is ascribed to self‐activation of the host matrix. In addition, greenish‐blue (493 nm) and red (613 nm) emissions were observed from europium‐doped samples and were attributed to the emissions of Eu²⁺ and Eu³⁺, respectively. Furthermore, after codoping with Bi³⁺, the emission intensity of Eu³⁺ located at 613 nm was significantly enhanced. From the Commission Internationale de I′Eclairage (CIE) color coordinates, white emission was observed from LiBa_1–xBO₃:xEu³⁺ (x = 0.020 and 0.025) phosphor powders with color coordinates of x = 0.368, y = 0.378 and x = 0.376, y = 0.366, respectively.     

Red emissive ternary europium complexes: synthesis,optical, and luminescence characteristics

Solid ternary europium complexes consisting of fluorinated β-diketone (thenoyltrifluoroacetone, TTFA) and heteroaromatic bidentate auxiliary ligands were synthesized. The luminescence features of the complexes were estimated using various spectral measurements and clearly proved that the Eu³⁺ ion is efficiently sensitized by ligands by an antenna effect. Photoluminescence excitation spectra have shown that Eu(III) complexes are excited effectively in the ultraviolet (UV) region and the corresponding emission spectra consist of characteristic peaks attributed to the ⁵D₀→⁷F_J transitions of the europium ion with the strongest emission peak at 611 nm (⁵D₀→⁷F₂). From photoluminescence (PL) data, decay time, Judd–Ofelt parameters, transition rates, and quantum efficiency of the complexes were also determined. The Commission Internationale de l'éclairage (CIE) colour coordinates indicated the bright red emission of ternary europium complexes. Correlated colour temperature values indicated the utilization of these complexes in display devices. Judd–Ofelt and photophysical parameters were also estimated theoretically using LUMPAC software. Various frontier molecular orbitals and their respective energy were determined. These red emissive europium complexes could be utilized for fabricating solid-state lighting systems.     

Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Novel low-temperature synthesis of Y2–xO3:Eux3+ nanophosphor using combustion with thioglycerol as fuel for near-UV light-emitting diodes

Luminescent materials used in flat panel displays, compact fluorescent lamps, and light-emitting diodes require high purity, uniform particle size, clean surfaces, spherical shape, and dense morphology to ensure long-term stability. Y₂O₃:Eu³⁺ is a widely studied red phosphor known for its characteristic photoluminescence (PL) emission at 613 nm with near-UV excitation at 392 nm. Many methods have been explored to synthesize Y₂O₃:Eu³⁺ nanoparticles with exceptional purity, consistent phases, and uniform particle sizes. The aim is to synthesize particles with pristine surfaces, spherical shape, and compact morphology. This study focuses on the low-temperature synthesis and PL investigation of Y_2–xO₃:Eu_x³⁺ nanophosphors using combustion with thioglycerol as fuel. The results are compared with Y_2–xO₃:Eu_x³⁺ red nanophosphors synthesized using wet chemical and nitrate combustion methods. The PL characteristics of the Y_2–xO₃:Eu_x³⁺ nanophosphors were analyzed using PL emission spectroscopy, X-ray diffraction, and scanning electron microscopy. These findings highlight the advantageous properties of the synthesized nanophosphors, such as their suitability for solid-state lighting applications in the lamp industry as highly efficient red phosphors. The combination of high purity, uniform particle size, clean surfaces, spherical shape, and dense morphology contributes to their potential for long-term stability and reliable performance in lighting devices.     

Luminescence study of Eu3+doped Li6Y(BO3)3 phosphor for solid‐state lighting

In this study, Li₆Y_1–xEu_x(BO₃)₃ phosphor was successfully synthesized using a modified solid‐state diffusion method. The Eu³⁺ ion concentration was varied at 0.05, 0.1, 0.2, 0.5 and 1 mol%. The phosphor was characterized for phase purity, morphology, luminescent properties and molecular transmission at room temperature. The XRD pattern suggests a result closely matching the standard JCPDS file (#80‐0843). The emission and excitation spectra were followed to discover the luminescence traits. The excitation spectra indicate that the current phosphor can be efficiently excited at 395 nm and at 466 nm (blue light) to give emission at 595 and 614 nm due to the ⁵D₀ → ⁷F_j transition of Eu³⁺ ions. Concentration quenching was observed at 0.5 mol% Eu³⁺ in the Li₆Y_1–xEu_x(BO₃)₃ host lattice. Strong red emission with CIE chromaticity coordinates of phosphor is x = 0.63 and y = 0.36 achieved with dominant red emission at 614 nm the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions. The novel Li₆Y_1–xEu_x(BO₃)₃ phosphor may be a suitable red‐emitting component for solid‐state lighting using double‐excited wavelengths, i.e. near‐UV at 395 nm and blue light at 466 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

A novel red‐emitting phosphor,KAl1‐xPO4Cl:Eux3+ (0.1 ≤ x ≤ 1.0)

A series of phosphors KAl_1‐xPO₄Cl:Eu_x³⁺ (0.1 ≤ x ≤ 1.0) was synthesized using a facile combustion method using urea as a fuel and their structural, morphological and photoluminescence properties were investigated. It was found that the particle size was in the range of 1–2 µm with an irregular shape. The f–f transitions of Eu³⁺ in the host lattice were assigned and discussed. The excitation and emission spectra indicated that this phosphor can be efficiently excited by ultraviolet (395 nm), and exhibit reddish orange emission corresponding to the ⁵D₀→⁷F_J (J = 0, 1, 2) transitions of Eu³⁺. The impact of the Eu³⁺ concentration on the relative emission intensity was investigated, and the best doping concentration is 0.5. The present study suggests that the KAl_0.5PO₄Cl: Eu_0.5³⁺ phosphor is a strong candidate as a red component for phosphor‐ converted white light‐emitting diodes (LEDs). Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence properties of green‐emitting Ca2MgSi2O7:Eu2+ phosphor by a solid‐state reaction method

A europium (Eu)‐doped di‐calcium magnesium di‐silicate phosphor, Ca₂MgSi₂O₇:Eu²⁺, was prepared using a solid‐state reaction method. The phase structure, particle size, surface morphology, elemental analysis, different stretching mode and luminescence properties were analyzed by X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM) with energy dispersive X‐ray spectroscopy (EDX), Fourier transform infrared (FTIR) spectroscopy, photoluminescence (PL) and mechanoluminescence (ML). The phase structure of Ca₂MgSi₂O₇:Eu²⁺ was an akermanite‐type structure, which belongs to the tetragonal crystallography with space group P4?2₁m; this structure is a member of the melilite group and forms a layered compound. The surface of the prepared phosphor was not found to be uniform and particle distribution was in the nanometer range. EDX and FTIR confirm the components of Eu²⁺‐doped Ca₂MgSi₂O₇ phosphor. Under UV excitation, the main emission peak appeared at 530 nm, belonging to the broad emission ascribed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The ML intensity of the prepared phosphor increased linearly with increasing impact velocity. A CIE color chromaticity diagram and ML spectrum confirmed that the prepared Ca₂MgSi₂O₇:Eu²⁺ phosphor would emit green color and the ML spectrum was similar to that of PL, which indicated that ML is emitted from the same center of Eu²⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Cation‐tunable blue phosphor Ca2PO4Cl:Eu2+: enhancive emission and site occupancy

A series of blue phosphors Ca_1.98–xM_xPO₄Cl:0.02Eu²⁺ (M = Mg and Sr) with different values of x were synthesized using a high‐temperature solid‐state reaction. X‐Ray diffraction and photoluminescence measurements were used to study the phase structure and luminescence properties. Ca₂PO₄Cl:0.02Eu²⁺ exhibits a tunable emission intensity and color due to the incorporation of Sr²⁺ or Mg²⁺. The incorporation of Sr²⁺ reduces the luminescence intensity and results in a slight red shift in the emission band. The incorporation of Mg²⁺ results in enhanced emission and a clear blue shift in the emission band along with a tunable chromatic coordination. Under excitation at λ = 334 nm, the emission intensity of the Mg²⁺‐doped Ca₂PO₄Cl:0.02Eu²⁺ is found to be 250% that of Ca₂PO₄Cl:0.02Eu²⁺. The luminescence behaviors of the as‐synthesized phosphors are discussed according to the host crystal structure and site occupancy of Eu²⁺. The results indicate that Mg²⁺‐doped Ca₂PO₄Cl:Eu²⁺ is more applicable as a near‐UV‐convertible blue phosphor for white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Ultrasound assisted synthesis of CaF2:Eu3+ phosphor nanoparticles

In this work, the optical and structural properties of ultrasonically prepared CaF₂:Eu³⁺ nanoparticles have been reported. Ultrasonically prepared CaF₂:Eu³⁺ phosphor shows orange, red emission bands at 591 nm and 612 nm, respectively, when it is excited by 394 light‐emitting diode (LED) excitation wavelengths. Further phosphor materials are well characterized by X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM) techniques to confirm the phase purity, metal oxygen (MO) bonding and crystallites size of the materials. Here synthesized materials show a tube‐like structure under 100 nm resolution and 0.1 mol% is the best doping value of the europium ion (Eu³⁺) in calcium fluoride (CaF₂) that shows highest intensity when prepared with an ultrasound assisted method.     

Study of trivalent samarium ion embedded lithium‐based borate glass for high‐density optical memory devices

Sm³⁺ ions doped strontium lithium lead borate glasses (SLLB:Sm) were prepared using a conventional melt‐quenching technique. The glasses were analyzed using X‐ray diffractometry and Fourier transform infrared spectroscopy, optical absorption, fluorescence spectral analysis, and fluorescence lifetime decay. The Judd–Ofelt (J–O) parameters and radiative parameters of the SLLB:Sm10 glass (1.0 mol% Sm³⁺ ion‐doped glass) were calculated using J–O theory. From the emission spectra, among all the synthesized glass, SLLB:Sm10 glass had the highest emission intensity for ⁴G_5/2→⁶H_11/2 transition (610 nm). Emission parameters, such as stimulated emission cross‐section and optical gain bandwidth, were calculated. For all concentrations of Sm³⁺ ions, the decay profile showed an exponential nature and decreased when the Sm³⁺ ion concentration was increased due to a concentration quenching effect. This result suggests that the synthesized SLLB:Sm10 glass could be used for application in high‐density optical memory devices.     

One-Step Preparation and Fluorescence Enhancement Effect in SiO2/Eu2+ Doped with Ag Nanowires

Eu²⁺ single-doped SiO₂ (SiO₂/Eu²⁺) and Eu²⁺, Ag nanowires co-doped SiO₂ (SiO₂/Eu²⁺–Ag) luminescent nanomaterials were prepared by an efficient one-step sol–gel method. Their microstructure and optical properties were characterized, and the fluorescence enhancement of Eu²⁺ by Ag nanowires was investigated. The experimental results indicate that the average diameter of Ag nanowires doped is 12.5 nm, and the length–diameter ratio is 30. The Ag nanowires cannot only enhance the light absorption of SiO₂/Eu²⁺ in the range of 230–350 nm, but also reduce the fluorescence lifetime of Eu²⁺. More importantly, the emission intensity is enhanced after doping Ag nanowires, and the red shift phenomenon of the emission spectrum is observed, red shift occurs between 10 and 56 nm. The highest fluorescence intensity is accessed under the Ag doping concentration of 0.10 %. Additionally, the emission of SiO₂/Eu²⁺ with 0.10 % of Ag doping at 456 nm is 16 times stronger than that of pure SiO₂/Eu²⁺. The present results indicate that the fluorescence enhancement is attributed to the local field enhancement and the increased radiative decay rates induced by Ag nanowires.     

Effects of slight structural distortion on the luminescence performance in (Ca1‐xEux)WO4 luminescent materials

(Ca_1‐xEu_x)WO₄ (x = 0–21 mol%) phosphors were prepared using the classical solid‐state reaction method. The influence of Eu³⁺ ion doping on lattice structure was observed using powder X‐ray diffraction and Fourier transform infrared spectroscopy. Furthermore, under this influence, the luminescence properties of all samples were analyzed. The results clearly illustrated that the element europium was successfully incorporated into the CaWO₄ lattice with a scheelite structure in the form of a Eu³⁺ ion, which introduced a slight lattice distortion into the CaWO₄ matrix. These lattice distortions had no effect on phase purity, but had regular effects on the intrinsic luminescence of the matrix and the f–f excitation transitions of Eu³⁺ activators. When the Eu³⁺ concentration was increased to 21 mol%, a local luminescence centre of [WO₄]^2? groups was detected in the matrix and manifested as the decay curves of [WO₄]^2? groups and luminescence changed from single exponential to double exponential fitting. Furthermore, the excitation transitions of Eu³⁺ between different energy levels (such as ⁷F₀→⁵L₆, ⁷F₀→⁵D₂) also produced interesting changes. Based on analysis of photoluminescence spectra and the chromaticity coordinates in this study, it could be verified that the nonreversing energy transfer of [WO₄]^2?→Eu³⁺ was efficient and incomplete.     

Photoluminescence properties of LiTi2 − xEux(PO4)3 phosphor

A solid‐state reaction route‐based LiTi_{2 ? x}Eu_x(PO₄)₃ was phosphor synthesized for the first time to evaluate its luminescence performance by excitation, emission and lifetime (τ) measurements. The LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor was excited at λ_exci. = 397 nm to give an intense orange–red (597 nm) emission attributed to the ⁵D₀ → ⁷F₁ magnetic dipole (ΔJ = ±1) transition and red (616 nm) emission (⁵D₀ → ⁷F₂), which is an electric dipole (ΔJ = ±2) transition of the Eu³⁺ ion. Beside this, excitation and emission spectra of host LiTi₂(PO₄)₃ powder were also reported. The effect of Eu³⁺ concentration on luminescence characteristics was explained from emission and lifetime profiles. Concentration quenching in the LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor was studied from the Dexter's model. Dipole–quadrupole interaction is found to be responsible for energy transfer among Eu³⁺ ions in the host lattice. The LiTi_{2 ? x}Eu_x(PO₄)₃ phosphor displayed a reddish‐orange colour realized from a CIE chromaticity diagram. We therefore suggest that this new phosphor could be used as an optical material of technological importance in the field of display devices. Copyright © 2016 John Wiley & Sons, Ltd.     

A promising RVO4:Eu3+,Li+@SiO2 (R = Gd,Y and Gd/Y) red‐emitting phosphor with improved luminescence (cd/m2) and colour purity for optical display applications

Red emission intensity was optimized in three stages, by investigating the effects of: (i) host composition (Gd, Y and Gd/Y), (ii) codoping Li⁺ as a sensitizer and, finally, (iii) with a SiO₂ shell coating as a protecting layer. Lanthanide vanadate powder phosphors were synthesized using a modified colloidal precipitation technique. The effects of SiO₂ coating on phosphor particles were characterized using scanning electron microscopy (SEM)‐EDAX, transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and photoluminescence (PL) measurements. An improvement in the PL intensity on Li codoping was due to improved crystallinity, which led to higher oscillating strengths for the optical transitions, and also a lowering of the inversion symmetry of Eu³⁺ ions. Red emission intensity due to ⁵D₀ → ⁵D₂ transition of the phosphor Y_0.94VO₄:Eu³⁺_0.05,Li⁺_0.01 was enhanced by 22.28% compared with Y_0.95VO₄:Eu³⁺_0.05, and was further improved by 58.73% with SiO₂ coating. The luminescence intensity (I) and colour coordinates (x, y) of the optimized phosphor Y_0.94VO₄:Eu³⁺_0.05,Li⁺_0.01@SiO₂, where I = 13.07 cd/m² and (x = 0.6721, y = 0.3240), were compared with values for a commercial red phosphor (Y₂O₂S:Eu³⁺), where I = 27 cd/m² and (x = 0.6522, y = 0.3437). The measured colour coordinates are superior to those of the commercial red phosphor, and moreover, match well with standard NTSC values (x = 0.67, y = 0.33). Copyright © 2015 John Wiley & Sons, Ltd.