Surface Engineering of TiO2 ETL for Highly Efficient and Hysteresis‐Less Planar Perovskite Solar Cell (21.4%) with Enhanced Open‐Circuit Voltage and Stability

Interfacial studies and band alignment engineering on the electron transport layer (ETL) play a key role for fabrication of high‐performance perovskite solar cells (PSCs). Here, an amorphous layer of SnO₂ (a‐SnO₂) between the TiO₂ ETL and the perovskite absorber is inserted and the charge transport properties of the device are studied. The double‐layer structure of TiO₂ compact layer (c‐TiO₂) and a‐SnO₂ ETL leads to modification of interface energetics, resulting in improved charge collection and decreased carrier recombination in PSCs. The optimized device based on a‐SnO₂/c‐TiO₂ ETL shows a maximum power conversion efficiency (PCE) of 21.4% as compared to 19.33% for c‐TiO₂ based device. Moreover, the modified device demonstrates a maximum open‐circuit voltage (V_oc) of 1.223 V with 387 mV loss in potential, which is among the highest reported value for PSCs with negligible hysteresis. The stability results show that the device on c‐TiO₂/a‐SnO₂ retains about 91% of its initial PCE value after 500 h light illumination, which is higher than pure c‐TiO₂ (67%) based devices. Interestingly, using a‐SnO₂/c‐TiO₂ ETL the PCE loss was only 10% of initial value under continuous UV light illumination after 30 h, which is higher than that of c‐TiO₂ based device (28% PCE loss).     

Cost-Effective Transparent N-Doped Tin Oxide Electrodes with Excellent Thermal and Chemical Stabilities Enabling Stable Perovskite Photovoltaics Based on Tin Oxide Electron Transport Layer

Perovskite solar cells (PSCs) incorporating chemical-bath-deposited (CBD) SnO₂ layers have garnered considerable attention because they combine high electron mobility and low-temperature processing, affording remarkable photovoltaic performance. However, the acidic conditions of CBD limit its compatibility with front transparent electrodes (FTEs). Herein, cost-effective, thermally stable, and highly transparent nitrogen-doped SnO₂ (NTO) FTEs tailored to integrate with CBD-SnO₂-based PSCs are developed. By precisely controlling the N dopant content in the magnetron sputtering process, a NTO FTE with a sheet resistance of 38.64 Ω/square, an optical transmittance of 86.17%, a smooth surface morphology (1.2 nm), and mechanical flexibility is obtained. Furthermore, doping N in SnO₂ imparts thermal and chemical stability superior to those of conventional Sn-doped In₂O₃ (ITO) electrodes. Additionally, a well-matched energy band of NTO with a SnO₂ electron transport layer (ETL) and homogeneous interfaces is a critical advantage. By implementing this multifaceted strategy using a novel low-cost NTO FTE, CBD-SnO₂-based PSCs with elevated open-circuit voltages and energy-barrier-free characteristics are fabricated. A champion power conversion efficiency of 20.43% is achieved, and 93.30% of the initial efficiency is retained even after 3 000 h without encapsulation. This integration of a NTO FTE with a SnO₂ ETL paves the way for robust and long-lasting high-performance PSCs.     

Simultaneous Contact and Grain‐Boundary Passivation in Planar Perovskite Solar Cells Using SnO2‐KCl Composite Electron Transport Layer

The performance of perovskite solar cells is sensitive to detrimental defects, which are prone to accumulate at the interfaces and grain boundaries of bulk perovskite films. Defect passivation at each region will lead to reduced trap density and thus less nonradiative recombination loss. However, it is challenging to passivate defects at both the grain boundaries and the bottom charge transport layer/perovskite interface, mainly due to the solvent incompatibility and complexity in perovskite formation. Here SnO₂‐KCl composite electron transport layer (ETL) is utilized in planar perovskite solar cells to simultaneously passivate the defects at the ETL/perovskite interface and the grain boundaries of perovskite film. The K and Cl ions at the ETL/perovskite interface passivate the ETL/perovskite contact. Meanwhile, K ions from the ETL can diffuse through the perovskite film and passivate the grain boundaries. An enhancement of open‐circuit voltage from 1.077 to 1.137 V and a corresponding power conversion efficiency increasing from 20.2% to 22.2% are achieved for the devices using SnO₂‐KCl composite ETL. The composite ETL strategy reported herein provides an avenue for defect passivation to further increase the efficiency of perovskite solar cells.     

Highly Efficient Tandem Organic Solar Cell Enabled by Environmentally Friendly Solvent Processed Polymeric Interconnecting Layer

In the field of organic solar cells (OSCs), tandem structure devices exhibit very attractive advantages for improving power conversion efficiency (PCE). In addition to the well researched novel pair of active layers in different subcells, the construction of interconnecting layer (ICL) also plays a critical role in achieving high performance tandem devices. In this work, a new way of achieving environmentally friendly solvent processed polymeric ICL by adopting poly[(9,9‐bis(3′‐(N,N‐dimethylamino)propyl)‐2,7‐fluorene)‐alt‐5,5′‐bis(2,2′‐thiophene)‐2,6‐naphthalene‐1,4,5,8‐tetracaboxylic‐N,N′‐di(2‐ethylhexyl)imide] (PNDIT‐F3N) blended with poly(ethyleneimine) (PEI) as the electron transport layer (ETL) and PEDOT:PSS as the hole transport layer is reported. It is found that the modification ability of PNDIT‐F3N on PEDOT can be linearly tuned by the incorporation of PEI, which offers the opportunity to study the charge recombination behavior in ICL. At last, tandem OSC with highest PCE of 12.6% is achieved, which is one of the best tandem OSCs reported till now. These results offer a new selection for constructing efficient ICL in high performance tandem OSCs and guide the way of design new ETL materials for ICL construction, and may even be integrated in future printed flexible large area module device fabrication with the advantages of environmentally friendly solvent processing and thickness insensitivity.     

Improved SnO2 Electron Transport Layers Solution‐Deposited at Near Room Temperature for Rigid or Flexible Perovskite Solar Cells with High Efficiencies

Electron transport layer (ETL) is a functional layer of great significance for boosting the power conversion efficiency (PCE) of perovskite solar cells (PSCs). To date, it is still a challenge to simultaneously reduce the surface defects and improve the crystallinity in ETLs during their low‐temperature processing. Here, a novel strategy for the mediation of in situ regrowth of SnO₂ nanocrystal ETLs is reported: introduction of controlled trace amounts of surface absorbed water on the fluorinated tin oxide (FTO) or indium–tin oxide (ITO) surfaces of the substrates using ultraviolet ozone (UVO) pretreatment. The optimum amount of adsorbed water plays a key role in balancing the hydrolysis–condensation reactions during the structural evolution of SnO₂ thin films. This new approach results in a full‐coverage SnO₂ ETL with a desirable morphology and crystallinity for superior optical and electrical properties, as compared to the control SnO₂ ETL without the UVO pretreatment. Finally, the rigid and flexible PSC devices based on the new SnO₂ ETLs yield high PCEs of up to 20.5% and 17.5%, respectively.     

p‐Type CuI Islands on TiO2 Electron Transport Layer for a Highly Efficient Planar‐Perovskite Solar Cell with Negligible Hysteresis

Compact TiO₂ is widely used as an electron transport material in planar‐perovskite solar cells. However, TiO₂‐based planar‐perovskite solar cells exhibit low efficiencies due to intrinsic problems such as the unsuitable conduction band energy and low electron extraction ability of TiO₂. Herein, the planar TiO₂ electron transport layer (ETL) of perovskite solar cells is modified with ionic salt CuI via a simple one‐step spin‐coating process. The p‐type nature of the CuI islands on the TiO₂ surface leads to modification of the TiO₂ band alignment, resulting in barrier‐free contacts and increased open‐circuit voltage. It is found that the polarity of the CuI‐modified TiO₂ surface can pull electrons to the interface between the perovskite and the TiO₂, which improves electron extraction and reduces nonradiative recombination. The CuI solution concentration is varied to control the electron extraction of the modified TiO₂ ETL, and the optimized device shows a high efficiency of 19.0%. In addition, the optimized device shows negligible hysteresis, which is believed to be due to the removal of trap sites and effective electron extraction by CuI‐modified TiO₂. These results demonstrate the hitherto unknown effect of p‐type ionic salts on electron transport material.     

Design of Star-Shaped Trimer Acceptors for High-Performance (Efficiency > 19%), Photostable,and Mechanically Robust Organic Solar Cells

High power conversion efficiency (PCE), long-term stability, and mechanical robustness are prerequisites for the commercial applications of organic solar cells (OSCs). In this study, a new star-shaped trimer acceptor (TYT-S) is developed and high-performance OSCs with a PCE of 19.0%, high photo-stability (t_80% lifetime = 2600 h under 1-sun illumination), and mechanical robustness with a crack-onset strain (COS) of 21.6% are achieved. The isotropic molecular structure of TYT-S affords efficient multi-directional charge transport and high electron mobility. Furthermore, its amorphous structure prevents the formation of brittle crystal-to-crystal interfaces, significantly enhancing the mechanical properties of the OSC. As a result, the TYT-S-based OSCs demonstrate a significantly higher PCE (19.0%) and stretchability (COS = 21.6%) than the linear-shaped trimer acceptor (TYT-L)-based OSCs (PCE = 17.5% and COS = 6.4%) and the small-molecule acceptor (MYT)-based OSCs (PCE = 16.5% and COS = 1.3%). In addition, the increased molecular size of TYT-S, relative to that of MYT and dimer (DYT), suppresses the diffusion kinetics of the acceptor molecules, substantially improving the photostability of the OSCs. Finally, to effectively demonstrate the potential of TYT-S, intrinsically stretchable (IS)-OSCs are constructed. The TYT-S-based IS-OSCs exhibit high device stretchability (strain at PCE_80% = 31%) and PCE of 14.4%.     

High‐Performance Flexible Perovskite Solar Cells via Precise Control of Electron Transport Layer

Flexible perovskite solar cells (f‐PSCs) have attracted great attention due to their promising commercial prospects. However, the performance of f‐PSCs is generally worse than that of their rigid counterparts. Herein, it is found that the unsatisfactory performance of planar heterojunction (PHJ) f‐PSCs can be attributed to the undesirable morphology of electron transport layer (ETL), which results from the rough surface of the flexible substrate. Precise control over the thickness and morphology of ETL tin dioxide (SnO₂) not only reduces the reflectance of the indium tin oxide (ITO) on polyethylene 2,6‐naphthalate (PEN) substrate and enhances photon collection, but also decreases the trap‐state densities of perovskite films and the charge transfer resistance, leading to a great enhancement of device performance. Consequently, the f‐PSCs, with a structure of PEN/ITO/SnO₂/perovskite/Spiro‐OMeTAD/Ag, exhibit a power conversion efficiency (PCE) up to 19.51% and a steady output of 19.01%. Furthermore, the f‐PSCs show a robust bending resistance and maintain about 95% of initial PCE after 6000 bending cycles at a bending radius of 8 mm, and they present an outstanding long‐term stability and retain about 90% of the initial performance after >1000 h storage in air (10% relative humidity) without encapsulation.     

A Switchable Interconnecting Layer for High Performance Tandem Organic Solar Cell

The all‐solution‐processed switchable interconnecting layer (ICL) for both inverted and normal tandem organic solar cells (OSCs) is reported for the first time here. The fundamental challenges in the literature arise from mixing multiple functionalities into a single layer. For a widely used ICL composed of an electron transport layer (ETL)/a hole transport layer (HTL), ETL needs not only to efficiently extract electrons from an underneath photoactive layer, but also to fulfill optical, mechanical, chemical and electrical requirements to function as effective tunneling junction ICL with HTL atop. Taking on multiple functionalities for a single ETL makes ETL in ICL highly coupled and difficult to be replaced. This is also the case for HTL. Here, this study demonstrates an all‐solution‐processed switchable ICL, ETL/recombination layer (RL)/HTL and HTL/RL/ETL, for both normal and inverted tandem OSCs. In switchable ICL, ETL and HTL simply serve as carrier transport layers as they did in single OSCs. Electrical recombination, mechanical protection and chemical separation functionalities are realized by RL alone. This strategy shifts the views of ICL for tandem OSCs from conventionally complicated ETL/HTL tunneling junction ICL, where both ETL and HTL play several different roles, towards simplified ICL where ETL and HTL play a distinct decoupled role, advancing ICL for more adaptable tandem OSCs.     

Interface‐Modification‐Induced Gradient Energy Band for Highly Efficient CsPbIBr2 Perovskite Solar Cells

Inorganic cesium lead halide perovskite solar cells (PSCs) have received enormous attention due to their excellent stability compared with that of their organic–inorganic counterparts. However, the lack of optimization strategies leads the inorganic PSCs to suffer from low efficiency arising from significant recombination. To overcome this dilemma, a surface modification of the electron transport layer (ETL)/perovskite interface is undertaken by using SmBr₃ to improve the crystallization and morphology of the perovskite layer for enhanced ETL/perovskite interface interaction. Encouragingly, a gradient energy band is created at the interface with an outstanding hole blocking effect. As a result, both the charge recombination occurring at the interface and the nonradiative recombination inside the perovskite are suppressed, and, simultaneously, the charge extraction is improved successfully. Therefore, the power conversion efficiency of the CsPbIBr₂ PSCs is increased to as high as 10.88% under one sun illumination, which is 30% higher than its counterparts without the modification. It is logically inferred that this valuable optimization strategy can be extended to other analogous structures and materials.     

Controllable ZnMgO Electron‐Transporting Layers for Long‐Term Stable Organic Solar Cells with 8.06% Efficiency after One‐Year Storage

Currently, one main challenge in organic solar cells (OSCs) is to achieve both good stability and high power conversion efficiencies (PCEs). Here, highly efficient and long‐term stable inverted OSCs are fabricated by combining controllable ZnMgO (ZMO) cathode interfacial materials with a polymer:fullerene bulk‐heterojunction. The resulting devices based on the nanocolloid/nanoridge ZMO electron‐transporting layers (ETLs) show greatly enhanced performance compared to that of the conventional devices or control devices without ZMO or with ZnO ETLs. The ZMO‐based OSCs maintain 84%–93% of their original PCEs over 1‐year storage under ambient conditions. An initial PCE of 9.39% is achieved for the best device, and it still retains a high PCE of 8.06% after 1‐year storage, which represents a record high value for long‐term stable OSCs. The excellent performance is attributed to the enhanced electron transportation/collection, reduced interfacial energy losses, and improved stability of the nanocolloid ZMO ETL. These findings provide a promising way to develop OSCs with high efficiencies and long device lifetime towards practical applications.     

Interfacial Modification Using Hydrogenated TiO2 Electron‐Selective Layers for High‐Efficiency and Light‐Soaking‐Free Organic Solar Cells

Optimizing the interfacial contacts between the photoactive layer and the electrodes is an important factor in determining the performance of organic solar cells (OSCs). A charge‐selective layer with tailored electrical properties enhances the charge collection efficiency and interfacial stability. Here, the potential of hydrogenated TiO₂ nanoparticles (H‐TiO₂ NPs) as an efficient electron‐selective layer (ESL) material in OSCs is reported for the first time. The H‐TiO₂ is synthesized by discharge plasma in liquid at atmospheric pressure, which has the benefits of a simple one‐pot synthesis process, rapid and mild reaction conditions, and the capacity for mass production. The H‐TiO₂ exhibits high conductivity and favorable energy level formation for efficient electron extraction, providing a basis for an efficient bilayer ESL system composed of conjugated polyelectrolyte/H‐TiO₂. Thus, the enhanced charge transport and extraction efficiency with reduced recombination losses at the cathode interfacial contacts is achieved. Moreover, the OSCs composed of H‐TiO₂ are almost free of light soaking, which has been reported to severely limit the performance and stability of OSCs based on conventional TiO₂ ESLs. Therefore, H‐TiO₂ as a new efficient, stable, and cost‐effective ESL material has the potential to open new opportunities for optoelectronic devices.     

Impact of Fullerene on the Photophysics of Ternary Small Molecule Organic Solar Cells

Ternary organic solar cells (OSCs) are among the best‐performing organic photovoltaic devices to date, largely due to the recent development of nonfullerene acceptors. However, fullerene molecules still play an important role in ternary OSC systems, since, for reasons not well understood, they often improve the device performance, despite their lack of absorption. Here, the photophysics of a prototypical ternary small‐molecule OSC blend composed of the donor DR3, the nonfullerene acceptor ICC6, and the fullerene derivative PC₇₁BM is studied by ultrafast spectroscopy. Surprisingly, it is found that after excitation of PC₇₁BM, ultrafast singlet energy transfer to ICC6 competes efficiently with charge transfer. Subsequently, singlets on ICC6 undergo hole transfer to DR3, resulting in free charge generation. Interestingly, PC₇₁BM improves indirectly the electron mobility of the ternary blend, while electrons reside predominantly in ICC6 domains as indicated by fast spectroscopy. The improved mobility facilitates charge carrier extraction, in turn leading to higher device efficiencies of the ternary compared to binary solar cells. Using the (photo)physical parameters obtained from (transient) spectroscopy and charge transport measurements, the device's current–voltage characteristics are simulated and it is demonstrated that the parameters accurately reproduce the experimentally measured device performance.     

Efficient Organic Solar Cells with Extremely High Open‐Circuit Voltages and Low Voltage Losses by Suppressing Nonradiative Recombination Losses

One of the most important factors that limits the efficiencies of bulk‐heterojunction organic solar cells (OSCs) is the modest open‐circuit voltage (V_oc) due to their large voltage loss (V_loss) caused by significant nonradiative recombination loss. To boost the performance of OSCs toward their theoretical limit, developing high‐performance donor: acceptor systems featuring low V_loss with suppressed nonradiative recombination losses (<0.30 V) is desired. Herein, high performance OSCs based on a polymer donor benzodithiophene‐difluorobenzoxadiazole‐2‐decyltetradecyl (BDT‐ffBX‐DT) and perylenediimide‐based acceptors (PDI dimer with spirofluorene linker (SFPDI), PDI4, and PDI6) are reported which offer a high power conversion efficiency (PCE) of 7.5%, 56% external quantum efficiency associated with very high V_oc (>1.10 V) and low V_loss (<0.60 V). A high V_oc up to 1.23 V is achieved, which is among the highest values reported for OSCs with a PCE beyond 6%, to date. These attractive results are benefit from the suppressed nonradiative recombination voltage loss, which is as low as 0.20 V. This value is the lowest value for OSCs so far and is comparable to high performance crystalline silicon and perovskite solar cells. These results show that OSCs have the potential to achieve comparable V_oc and voltage loss as inorganic photovoltaic technologies.     

Stability of Nonfullerene Organic Solar Cells: from Built‐in Potential and Interfacial Passivation Perspectives

Remarkable progress has been made in the development of high‐efficiency solution‐processable nonfullerene organic solar cells (OSCs). However, the effect of the vertical stratification of bulk heterojunction (BHJ) on the efficiency and stability of nonfullerene OSCs is not fully understood yet. In this work, we report our effort to understand the stability of nonfullerene OSCs, made with the binary blend poly[(2,6‐(4, 8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′] dithiophene‐4,8‐dione)] (PBDB‐T):3,9‐ bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone))‐5,5,11,11‐tetrakis(4‐hexylphenyl)‐ dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′] dithiophene (ITIC) system. It shows that a continuous vertical phase separation process occurs, forming a PBDB‐T‐rich top surface and an ITIC‐rich bottom surface in PBDB‐T:ITIC BHJ during the aging period. A gradual decrease in the built‐in potential (V₀) in the regular configuration PBDB‐T:ITIC OSCs, due to the interfacial reaction between the poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate) (PEDOT:PSS) hole transporting layer and ITIC acceptor, is one of the reasons responsible for the performance deterioration. The reduction in V₀, caused by an inevitable reaction at the ITIC/PEDOT:PSS interface in the OSCs, can be suppressed by introducing a MoO₃ interfacial passivation layer. Retaining a stable and high V₀ across the BHJ through interfacial modification and device engineering, e.g., as seen in the inverted PBDB‐T:ITIC OSCs, is a prerequisite for efficient and stable operation of nonfullerene OSCs.     

Oligothiophene Additive-Assisted Morphology Control and Recombination Suppression Enable High-Performance Organic Solar Cells

Tuning the morphology through processing additives represents one of the most promising strategies to boost the performance of organic solar cells (OSCs). However, it remains unclear how oligothiophene-based solid additives influence the molecular packing and performance of OSCs. Here, two additives namely 2T and 4T, are introduced into state-of-the-art PM6:Y6-based OSCs to understand how they influence the film formation process, nanoscale morphology, and the photovoltaic performance. It is found that the 2T additive can improve the molecular packing of both donor polymer and non-fullerene acceptor, resulting in lower Urbach energy and reduced energy loss. Furthermore, the blend film with 2T treatment displays enhanced domain purity and a more favorable distribution of the acceptor and donor materials in the vertical direction, which can enhance charge extraction efficiency while simultaneously suppressing charge recombination. Consequently, OSCs processed with 2T additive realize a promising efficiency of 18.1% for PM6:Y6-based devices. Furthermore, the general applicability of the additive is demonstrated, and an impressive efficiency of 18.6% for PM6:L8-BO-based OSCs is achieved. These findings highlight that the uncomplicated oligothiophenes have excellent potential in fine-adjustment of the active layer morphology, which is crucial for the future development of OSCs.     

Efficiency Enhancement of Organic Solar Cells Using Hydrophobic Antireflective Inverted Moth‐Eye Nanopatterned PDMS Films

Poly‐dimethylsiloxane (PDMS) films with 2D periodic inverted moth‐eye nanopatterns on one surface are implemented as antireflection (AR) layers on a glass substrate for efficient light capture in encapsulated organic solar cells (OSCs). The inverted moth‐eye nanopatterned PDMS (IMN PDMS) films are fabricated by a soft imprint lithographic method using conical subwavelength grating patterns formed by laser interference lithography/dry etching. Their optical characteristics, together with theoretical analysis using rigorous coupled‐wave analysis simulation, and wetting behaviors are investigated. For a period of 380 nm, IMN PDMS films laminated on glass substrates exhibit a hydrophobic surface with a water contact angle (θ_CA) of ≈120° and solar weighted transmittance (SWT) of ≈94.2%, both significantly higher than those (θ_CA≈ 36° and SWT ≈ 90.3%) of bare glass substrates. By employing IMN PDMS films with a period of 380 nm on glass substrates for OSCs, an enhanced power conversion efficiency (PCE) of 6.19% is obtained mainly due to the increased short‐circuit current density (J_sc) of 19.74 mA cm^‐2 compared to the OSCs with the bare glass substrates (PCE = 5.16% and J_sc = 17.25 mA cm^‐2). For the OSCs, the device stability is also studied.     

High Performance Thick‐Film Nonfullerene Organic Solar Cells with Efficiency over 10% and Active Layer Thickness of 600 nm

Developing efficient organic solar cells (OSCs) with relatively thick active layer compatible with the roll to roll large area printing process is an inevitable requirement for the commercialization of this field. However, typical laboratory OSCs generally exhibit active layers with optimized thickness around 100 nm and very low thickness tolerance, which cannot be suitable for roll to roll process. In this work, high performance of thick‐film organic solar cells employing a nonfullerene acceptor F–2Cl and a polymer donor PM6 is demonstrated. High power conversion efficiencies (PCEs) of 13.80% in the inverted structure device and 12.83% in the conventional structure device are achieved under optimized conditions. PCE of 9.03% is obtained for the inverted device with active layer thickness of 500 nm. It is worth noting that the conventional structure device still maintains the PCE of over 10% when the film thickness of the active layer is 600 nm, which is the highest value for the NF‐OSCs with such a large active layer thickness. It is found that the performance difference between the thick active layer films based conventional and inverted devices is attributed to their different vertical phase separation in the active layers.     

Significant Effect of Fluorination on Simultaneously Improving Work Function and Transparency of Anode Interlayer for Organic Solar Cells

Since the highest occupied molecular orbital (HOMO) level of donors in organic solar cells (OSCs) is being constantly downshifted for achieving high open‐circuit voltage (V_oc), a further enhancement of the anode work function (WF) is required. Herein, an effective approach of fluorination is demonstrated to simultaneously improve the WF and transparency for anode interlayer (AIL) material. By fluorination, in combination with the dialysis treatment in LiCl solution, the WF of PCP‐2F‐Li could be significantly enhanced from 4.86 to 5.0 eV, as compared to PCP‐Na. Meanwhile, the transparency of the polymer is also improved. As a result, PCP‐2F‐Li can be used to modify efficient active layers consisting of polymer donors with deep HOMO levels, such as PBDB‐T‐2F:IT‐4F, and an outstanding power conversion efficiency (PCE) of 12.7% is achieved in the corresponding device with a high V_oc of 0.84 V. This result represents the highest efficiency for the OSCs using a solution‐processed pH‐neutral AIL, which is beneficial to the low‐cost fabrication of high‐performance OSCs with improved stability. More importantly, PCP‐2F‐Li could be processed by blade coating for making large‐area device of 1 cm², and a PCE of 10.6% is achieved, bringing a promising prospect for the large‐area device fabrication.     

Enhanced Nucleation of Atomic Layer Deposited Contacts Improves Operational Stability of Perovskite Solar Cells in Air

Metal‐halide perovskites show promise as highly efficient solar cells, light‐emitting diodes, and other optoelectronic devices. Ensuring long‐term stability is now a major priority. In this study, an ultrathin (2 nm) layer of polyethylenimine ethoxylated (PEIE) is used to functionalize the surface of C₆₀ for the subsequent deposition of atomic layer deposition (ALD) SnO₂, a commonly used electron contact bilayer for p–i–n devices. The enhanced nucleation results in a more continuous initial ALD SnO₂ layer that exhibits superior barrier properties, protecting Cs_0.25FA_0.75Pb(Br_0.20I_0.80)₃ films upon direct exposure to high temperatures (200 °C) and water. This surface modification with PEIE translates to more stable solar cells under aggressive testing conditions in air at 60 °C under illumination. This type of “built‐in” barrier layer mitigates degradation pathways not addressed by external encapsulation, such as internal halide or metal diffusion, while maintaining high device efficiency up to 18.5%. This nucleation strategy is also extended to ALD VO_x films, demonstrating its potential to be broadly applied to other metal oxide contacts and device architectures.