The futuristic applications of transition metal dichalcogenides for cancer therapy

The second-most common cause of death resulting from genetic mutations in DNA sequences is cancer. The difficulty in the field of anticancer research is the application of the traditional methods, which also affects normal cells. Mutations, genetic replication alterations, and chromosomal abnormalities have a direct impact on the effectiveness of anticancer drugs at different stages. Presently, therapeutic techniques utilize nanotechnology, transition metal dichalcogenides (TMDCs), and robotics. TMDCs are being increasingly employed in tumor therapy and biosensing applications due to their biocompatibility, adjustable bandgap, versatile functionality, exceptional photoelectric properties, and wide range of applications. This study reports the advancement of nanoplatforms based on TMDCs that are specifically engineered for responsive and intelligent cancer therapy. This article offers a thorough examination of the current challenges, future possibilities for theranostic applications using TMDCs, and recent progress in employing TMDCs for cancer therapy. Currently, there is significant interest in two-dimensional (2D) TMDCs nanomaterials as ultrathin unique physicochemical properties. These materials have attracted attention in various fields, including biomedicine. Due to their inherent ability to absorb near-infrared light and their exceptionally large surface area, significant efforts are being made to prepare multifunctional nanoplatforms based on 2D TMDCs.     

Preparation and usage of nanomaterials in biomedicine

Nanotechnology is one of the most promising and decisive technologies in the world. Nanomaterials, as the primary research aspect of nanotechnology, are quite different from macroscopic materials because of their unique optical, electrical, magnetic, thermal properties, and more robust mechanical properties, which make them play an essential role in the field of materials science, biomedical field, aerospace field, and environmental energy. Different preparation methods for nanomaterials have various physical and chemical properties and are widely used in different areas. In this review, we focused on the preparation methods, including chemical, physical, and biological methods due to the properties of nanomaterials. We mainly clarified the characteristics, advantages, and disadvantages of different preparation methods. Then, we focused on the applications of nanomaterials in biomedicine, including biological detection, tumor diagnosis, and disease treatment, which provide a development trend and promising prospects for nanomaterials.     

Toxicity of inorganic nanomaterials in biomedical imaging

Inorganic nanoparticles have shown promising potentials as novel biomedical imaging agents with high sensitivity, high spatial and temporal resolution. To translate the laboratory innovations into clinical applications, their potential toxicities are highly concerned and have to be evaluated comprehensively both in vitro and in vivo before their clinical applications. In this review, we first summarized the in vivo and in vitro toxicities of the representative inorganic nanoparticles used in biomedical imagings. Then we further discuss the origin of nanotoxicity of inorganic nanomaterials, including ROS generation and oxidative stress, chemical instability, chemical composition, the surface modification, dissolution of nanoparticles to release excess free ions of metals, metal redox state, and left-over chemicals from synthesis, etc. We intend to provide the readers a better understanding of the toxicology aspects of inorganic nanomaterials and knowledge for achieving optimized designs of safer inorganic nanomaterials for clinical applications.     

Cadmium-containing quantum dots: properties,applications, and toxicity

The marriage of biology with nanomaterials has significantly accelerated advancement of biological techniques, profoundly facilitating practical applications in biomedical fields. With unique optical properties (e.g., tunable broad excitation, narrow emission spectra, robust photostability, and high quantum yield), fluorescent quantum dots (QDs) have been reasonably functionalized with controllable interfaces and extensively used as a new class of optical probe in biological researches. In this review, we summarize the recent progress in synthesis and properties of QDs. Moreover, we provide an overview of the outstanding potential of QDs for biomedical research and innovative methods of drug delivery. Specifically, the applications of QDs as novel fluorescent nanomaterials for biomedical sensing and imaging have been detailedly highlighted and discussed. In addition, recent concerns on potential toxicity of QDs are also introduced, ranging from cell researches to animal models.

     

Gold nanomaterials as key suppliers in biological and chemical sensing,catalysis, and medicine

BackgroundGold nanoparticles (AuNPs) with unique physicochemical properties have received a great deal of interest in the field of biological, chemical and biomedical implementations. Despite the widespread use of AuNPs in chemical and biological sensing, catalysis, imaging and diagnosis, and more recently in therapy, no comprehensive summary has been provided to explain how AuNPs could aid in developing improved sensing and catalysts systems as well as medical settings.Scope of reviewThe chemistry of Au-based nanosystems was followed by reviewing different applications of Au nanomaterials in biological and chemical sensing, catalysis, imaging and diagnosis by a number of approaches, and finally synergistic combination therapy of different cancers. Afterwards, the clinical impacts of AuNPs, future application of AuNPs, and opportunities and challenges of AuNPs application were also discussed.Major conclusionsAuNPs show exclusive colloidal stability and are considered as ideal candidates for colorimetric detection, catalysis, imaging, and photothermal transducers, because their physicochemical properties can be tuned by adjusting their structural dimensions achieved by the different manufacturing methods.General significanceThis review provides some details about using AuNPs in sensing and catalysis applications as well as promising theranostic nanoplatforms for cancer imaging and diagnosis, and sensitive, non-invasive, and synergistic methods for cancer treatment in an almost comprehensive manner.     

Perspectives of different colour-emissive nanomaterials in fluorescent ink,LEDs, cell imaging,and sensing of various analytes

In the past 2 decades, multicolour light-emissive nanomaterials have gained significant interest in chemical and biological sciences because of their unique optical properties. These materials have drawn much attention due to their unique characteristics towards various application fields. The development of novel nanomaterials has become the pinpoint for different application areas. In this review, the recent progress in the area of multicolour-emissive nanomaterials is summarized. The different emissions (white, orange, green, red, blue, and multicolour) of nanostructure materials (metal nanoclusters, quantum dots, carbon dots, and rare earth-based nanomaterials) are briefly discussed. The potential applications of different colour-emissive nanomaterials in the development of fluorescent inks, light-emitting diodes, cell imaging, and sensing devices are briefly summarized. Finally, the future perspectives of multicolour-emissive nanomaterials are discussed.     

Tree gum-based renewable materials: Sustainable applications in nanotechnology,biomedical and environmental fields

The prospective uses of tree gum polysaccharides and their nanostructures in various aspects of food, water, energy, biotechnology, environment and medicine industries, have garnered a great deal of attention recently. In addition to extensive applications of tree gums in food, there are substantial non-food applications of these commercial gums, which have gained widespread attention due to their availability, structural diversity and remarkable properties as ‘green’ bio-based renewable materials. Tree gums are obtainable as natural polysaccharides from various tree genera possessing exceptional properties, including their renewable, biocompatible, biodegradable, and non-toxic nature and their ability to undergo easy chemical modifications. This review focuses on non-food applications of several important commercially available gums (arabic, karaya, tragacanth, ghatti and kondagogu) for the greener synthesis and stabilization of metal/metal oxide NPs, production of electrospun fibers, environmental bioremediation, bio-catalysis, biosensors, coordination complexes of metal–hydrogels, and for antimicrobial and biomedical applications. Furthermore, polysaccharides acquired from botanical, seaweed, animal, and microbial origins are briefly compared with the characteristics of tree gum exudates.     

High Sensitivity in Ni-Based SPR Sensor of Blue Phosphorene/Transition Metal Dichalcogenides Hybrid Nanostructure

In the present work, a novel surface plasmon resonance (SPR) sensor consisting of the nickel (Ni) film with hybrid structure of blue phosphorene (BlueP)/transition metal dichalcogenides (TMDCs) is reported. By optimizing the thickness of Ni layer and BlueP/TMDCs, the maximum sensitivity with 270°/RIU for the Ni-BlueP/WS₂ is achieved. Use of BlueP/TMDCs layer facilitates the sensitivity due to its high electron concentration, high mobility, optical, and electronic properties. Compared with the conventional Ni-based SPR sensor, the sensitivity of the proposed one is enhanced up to ~ 60.7%. We hope that the SPR sensor has potential application prospects in chemical detection, medical diagnostic, optical sensing, etc. due to its high sensitivity.

     

FET-based nanobiosensors for the detection of smell and taste

Various nanobiosensors composed of biomaterials and nanomaterials have been developed, due to their demonstrated advantage of showing high performance. Among various biomaterials for biological recognition elements of the nanobiosensor, sensory receptors, such as olfactory and taste receptors, are promising biomaterials for developing nanobiosensors, because of their high selectivity to target molecules. Field-effect transistors(FET) with nanomaterials such as carbon nanotube(CNT), graphene, and conducting polymer nanotube(CPNT), can be combined with the biomaterials to enhance the sensitivity of nanobiosensors.Recently, many efforts have been made to develop nanobiosensors using biomaterials, such as olfactory receptors and taste receptors for detecting various smells and tastes. This review focuses on the biomaterials and nanomaterials used in nanobiosensor systems and studies of various types of nanobiosensor platforms that utilize olfactory receptors and taste receptors which could be applied to a wide range of industrial fields, including the food and beverage industry, environmental monitoring, the biomedical field, and anti-terrorism.     

Highly sensitive ethanol chemical sensor based on Ni-doped SnO₂ nanostructure materials

Due to potential applications of semiconductor transition doped nanostructure materials and the important advantages of synthesis in cost-effective and environmental concerns, a significant effort has been consummated for improvement of Ni-doped SnO(2) nanomaterials using hydrothermal technique at room conditions. The structural and optical properties of the low-dimensional (average diameter, 52.4 nm) Ni-doped SnO(2) nanostructures were demonstrated using various conventional techniques such as UV/visible spectroscopy, FT-IR spectroscopy, X-ray powder diffraction (XRD), and Field-emission scanning electron microscopy (FE-SEM). The calcined doped material is an attractive semiconductor nanoparticle for accomplishment in chemical sensing by simple I-V technique, where toxic chemical (ethanol) is used as a target chemical. Thin-film of Ni-doped SnO(2) nanostructure materials with conducting coating agents on silver electrodes (AgE, surface area, 0.0216 cm(2)) revealed higher sensitivity and repeatability. The calibration plot is linear (R, 0.8440) over the large dynamic range (1.0 nM-1.0 mM), where the sensitivity is approximately 2.3148 μA cm(-2) mM(-1) with a detection limit of 0.6 nM, based on signal/noise ratio in short response time. Consequently on the basis of the sensitive communication among structures, morphologies, and properties, it is exemplified that the morphologies and the optical characteristics can be extended to a large scale in doping nanomaterials and proficient chemical sensors applications.     

场效应晶体管生物传感器在生物医学检测中的应用研究进展*

场效应晶体管生物传感器因其灵敏度高、分析速度快、无标记、体积小、操作简单等特点而受到了很多关注,广泛应用于DNA、蛋白质、细胞、离子等生物识别物的检测。近年来,更有纳米材料和微电子技术在传感器设计中提高传感器的传感性能,场效应晶体管生物传感器朝着高灵敏、微型化、快速化以及多功能化的方向以令人惊叹的速度发展。研究场效应晶体管生物传感器工作原理,阐述近年来场效应晶体管生物传感器在生物医学检测领域中最新的研究进展与应用,探讨场效应晶体管生物传感器克服各种缺陷的应对策略,为该传感器在未来生物医学检测中的开发提供参考。     

Emerging Trends in Microfluidics Based Devices

One of the major challenges for scientists and engineers today is to develop technologies for the improvement of human health in both developed and developing countries. However, the need for cost‐effective, high‐performance diagnostic techniques is very crucial for providing accessible, affordable, and high‐quality healthcare devices. In this context, microfluidic‐based devices (MFDs) offer powerful platforms for automation and integration of complex tasks onto a single chip. The distinct advantage of MFDs lies in precise control of the sample quantities and flow rate of samples and reagents that enable quantification and detection of analytes with high resolution and sensitivity. With these excellent properties, microfluidics (MFs) have been used for various applications in healthcare, along with other biological and medical areas. This review focuses on the emerging demands of MFs in different fields such as biomedical diagnostics, environmental analysis, food and agriculture research, etc., in the last three or so years. It also aims to reveal new opportunities in these areas and future prospects of commercial MFDs.     

贵金属-磁性异质结构纳米材料及其生物医学应用

异质结构纳米颗粒不仅可以同时拥有多种单组分纳米颗粒不同的性能,实现多功能化,还可能因组分间的相互耦合作用而产生单组分颗粒不具备的新性能,因而在化学化工、生物医学、能源催化等领域引起广泛关注.贵金属具有特殊的光学性质和催化活性;磁性纳米颗粒拥有优异的磁性能,因而备受研究人员关注.贵金属-磁性异质结构纳米材料集合了两种材料优异的性能,能通过不同的异质结构展现出不同的性质.本文根据异质结构的类型,将贵金属-磁性异质结构纳米材料分为核壳结构、蛋黄-壳结构和哑铃结构3种,总结了不同贵金属-磁性异质结构纳米颗粒的特性、制备方法及应用,并重点论述了其在诊疗一体化探针、多模态成像探针和刺激响应型药物载体生物医学领域上的应用.     

Production and potential biotechnological applications of microbial surfactants: An overview

Microbial surfactants are amphipathic molecules that consist of hydrophilic and hydrophobic domains, which allow partition of two fluid phases of varying degree of polarity. They are classified into two main groups: bioemulsifier and biosurfactant, depending on their molecular weight. Microbial surfactants occur in various categories according to their chemical nature and producing organisms. These biomolecules are produced by diverse groups of microorganisms including fungi, bacteria, and yeasts. Their production is significantly influenced by substrate type, fermentation technology and microbial strains. Owing to inherent multifunctional properties and assorted synthetic aptitude of the microbes, microbial surfactants are mostly preferred than their chemical counterparts for various industrial and biomedical applications including bioremediation, oil recovery; as supplements in laundry formulations and as emulsion-stabilizers in food and cosmetic industries as well as therapeutic agents in medicine. The present review discusses on production of microbial surfactants as promising and alternative broad-functional biomolecules for various biotechnological applications.     

Potentialities of fluorescent carbon nanomaterials as sensor for food analysis

Food safety and quality are among the most significant and prevalent research areas worldwide. The fabrication of appropriate technical procedures or devices for the recognition of hazardous features in foods is essential to safeguard food materials. In the recent era, developing high-performance sensors based on carbon nanomaterial for food safety investigation has made noteworthy progress. Hence this review briefly highlights the different detection approaches (colorimetric sensor, fluorescence sensor, surface-enhanced Raman scattering, surface plasmon resonance, chemiluminescence, and electroluminescence), functional carbon nanomaterials with various dimensions (quantum dots, graphene quantum dots) and detection mechanisms. Further, this review emphasizes the assimilation of carbon nanomaterials with optical sensors to identify multiple contaminants in food products. The insights of carbon-based nanomaterials optical sensors for pesticides and insecticides, toxic metals, antibiotics, microorganisms, and mycotoxins detection are described in detail. Finally, the opportunities and future perspectives of nanomaterials-based optical analytical approaches for detecting various food contaminants are discussed.     

Production of bioelectricity,bio-hydrogen,high value chemicals and bioinspired nanomaterials by electrochemically active biofilms

Microorganisms naturally form biofilms on solid surfaces for their mutual benefits including protection from environmental stresses caused by contaminants, nutritional depletion or imbalances. The biofilms are normally dangerous to human health due to their inherited robustness. On the other hand, a recent study suggested that electrochemically active biofilms (EABs) generated by electrically active microorganisms have properties that can be used to catalyze or control the electrochemical reactions in a range of fields, such as bioenergy production, bioremediation, chemical/biological synthesis, bio-corrosion mitigation and biosensor development. EABs have attracted considerable attraction in bioelectrochemical systems (BESs), such as microbial fuel cells and microbial electrolysis cells, where they act as living bioanode or biocathode catalysts. Recently, it was reported that EABs can be used to synthesize metal nanoparticles and metal nanocomposites. The EAB-mediated synthesis of metal and metal–semiconductor nanocomposites is expected to provide a new avenue for the greener synthesis of nanomaterials with high efficiency and speed than other synthetic methods. This review covers the general introduction of EABs, as well as the applications of EABs in BESs, and the production of bio-hydrogen, high value chemicals and bio-inspired nanomaterials.     

Antibody production,design and use for biosensor-based applications

Currently, the reliable detection and quantification of a multitude of different analytes is crucial in many applications and settings. Biosensors have revolutionised diagnostics for use in point-of-care testing (POC), the detection of food and environmental contaminants, biological warfare agents, illicit drugs and human/animal disease markers. Antibodies continue to play a pivotal role in many sensor devices due to their exquisite specificity for their cognate antigens. In this review current biosensor platforms employing antibodies for molecular recognition are briefly described. The use of molecular biological techniques for the generation and improvement of antibodies is critically examined. Such recombinant antibodies possess improved attributes for use in biosensor development in terms of design, stability, affinity and specificity.     

纳米材料在生物医学检测中的应用

纳米技术的兴起,对生物医学领域的变革产生了深远的影响。纳米材料是纳米技术发展的重要基础,它具有许多传统材料所不具备的独特的理化性质,因此在生物医学、传感器等重要技术领域有着广泛的应用前景。对几类常见的纳米材料包括纳米金、量子点、磁性纳米粒子、碳纳米管和硅纳米线在蛋白质、DNA、金属离子以及生物相关分子检测方面的应用进行综述。     

Fluorescent quantum dots: An insight on synthesis and potential biological application as drug carrier in cancer

Quantum dots (QDs) are nanocrystals of semiconducting material possessing quantum mechanical characteristics with capability to get conjugated with drug moieties. The particle size of QDs varies from 2 to 10 nm and can radiate a wide range of colours depending upon their size. Their wide and diverse usage of QDs across the world is due to their adaptable properties like large quantum yield, photostability, and adjustable emission spectrum. QDs are nanomaterials with inherent electrical characteristics that can be used as drug carrier vehicle and as a diagnostic in the field of nanomedicine. Scientists from various fields are aggressively working for the development of single platform that can sense, can produce a microscopic image and even be used to deliver a therapeutic agent. QDs are the fluorescent nano dots with which the possibilities of the drug delivery to a targeted site and its biomedical imaging can be explored. This review is mainly focused on the different process of synthesis of QDs, their application especially in the areas of malignancies and as a theranostic tool. The attempt is to consolidate the data available for the use of QDs in the biomedical applications.     

Implications of molecular diversity of chitin and its derivatives

Chitin is a long unbranched polysaccharide, made up of β-1,4-linked N-acetylglucosamine which forms crystalline fiber-like structure. It is present in the fungal cell walls, insect and crustacean cuticles, nematode eggshells, and protozoa cyst. We provide a critical appraisal on the chemical modifications of chitin and its derivatives in the context of their improved efficacy in medical applications without any side effect. Recent advancement in nanobiotechnology has helped to synthesize several chitin derivatives having significant biological applications. Here, we discuss the molecular diversity of chitin and its applications in enzyme immobilization, wound healing, packaging material, controlled drug release, biomedical imaging, gene therapy, agriculture, biosensor, and cosmetics. Also, we highlighted chitin and its derivatives as an antioxidant, antimicrobial agent, anticoagulant material, food additive, and hypocholesterolemic agent. We envisage that chitin and chitosan-based nanomaterials with their potential applications would augment nanobiotechnology and biomedical industries.