Fe3+-activated magnetoplumbite persistent luminescence phosphor by modulating the oxygen vacancy

Broadband near-infrared (NIR) spectroscopy has gained significant attention due to its versatile application in various fields. In the realm of NIR phosphors, Fe³⁺ ion is an excellent activator known for its nontoxic and harmless nature. In this study, we prepared an Fe³⁺-activated SrGa₁₂O₁₉ (SGO) NIR phosphor and analyzed its phase and luminescence properties. Upon excitation at 326 nm, the SGO:Fe³⁺ phosphor exhibited a broadband emission in the range 700–1000 nm, peaking at 816 nm. The optical band gap of SGO:Fe³⁺ was evaluated. To enhance the long-lasting phosphorescence, an oxygen vacancy-rich SGO:Fe³⁺ (V_O-SGO:Fe³⁺) sample was prepared for activation. Interestingly, the increase in the oxygen-vacancy concentration indeed contributed to the activation of persistent luminescence of Fe³⁺ ions. The V_O-SGO:Fe³⁺ sample has a long duration and high charge storage capacity, allowing it to perform efficiently in various applications. This work provides the foundation for further design of Cr³⁺-free PersL phosphors with efficient NIR PersL.     

Study on luminescence properties of Ce3+ and Eu3+ ions in a nanocrystalline hexagonal Zn4Al22O37 novel system

The present communication is strongly focused on the investigation of synthesis, structural and luminescence properties of cerium (Ce³⁺)- and europium (Eu³⁺)-activated Zn₄Al₂₂O₃₇ phosphors. Ce³⁺- and Eu³⁺-doped Zn₄Al₂₂O₃₇ novel phosphors were prepared using a solution combustion synthesis route. Structural properties were studied using powder X-ray diffraction and high-resolution transverse electron microscopy. The optical properties were studied using ultraviolet–visible light spectroscopy and Fourier transform infrared spectroscopy; luminescence properties were studied using a photoluminescence (PL) technique. The crystal structure of the prepared Zn₄Al₂₂O₃₇ host and Ce³⁺- and Eu³⁺-activated Zn₄Al₂₂O₃₇ phosphors was investigated and was found to have a hexagonal structure. The measured PL emission spectrum of the Ce³⁺-doped Zn₄Al₂₂O₃₇ phosphor showed an intense and broad emission band centred at 421 nm under a 298 nm excitation wavelength. By contrast, the Eu³⁺-doped Zn₄Al₂₂O₃₇ phosphor exhibited two strong and intense emission bands at approximately 594 nm (orange) and 614 nm (red), which were monitored under 395 nm excitation. The Commission Internationale de l’Eclairage (CIE) colour coordinates of the Ce³⁺-doped Zn₄Al₂₂O₃₇ were investigated and found to be x = 0.1567, y = 0.0637 (blue) at 421 nm and for Eu³⁺-doped Zn₄Al₂₂O₃₇ were x = 0.6018, y = 0.3976 (orange) at 594 nm and x = 0.6779, y = 0.3219 (red) at 614 nm emission. The luminescence behaviour of the synthesized phosphors suggested that these phosphors may be used in lighting applications.     

Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties of a new orange–red‐emitting Sm3+–La3SbO7 phosphor

The antimonate compound La₃SbO₇ has high chemical stability, lattice stiffness and thermal stability. Orange–red‐emitting antimonate‐based phosphors La₃SbO₇:xSm³⁺ (x = 0.02, 0.05, 0.08, 0.10, 0.15, 0.20 and 0.25) were synthesized. The phase structure and photoluminescence properties of these phosphors were investigated. The emission spectrum obtained on excitation at 407 nm contained exclusively the characteristic emissions of Sm³⁺ at 568, 608, 654 and 716 nm, which correspond to the transitions from ⁴G_5/2 to ⁶H_5/2, ⁶H_7/2, ⁶H_9/2 and ⁶H_11/2 of Sm³⁺, respectively. The strongest emission was located at 608 nm due to the ⁴G_5/2→⁶H_7/2 transition of Sm³⁺, generating bright orange–red light. The critical quenching concentration of Sm³⁺ in La₃SbO₇:Sm³⁺ phosphor was determined as 10% and the energy transfer between Sm³⁺ was found to be through an exchange interaction. The International Commission on Illumination chromaticity coordinates of the La₃SbO₇:0.10Sm³⁺ phosphors are located in the orange–red region. The La₃SbO₇:Sm³⁺ phosphors may be potentially used as red phosphors for white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence in K3Ca2(SO4)3Cl‐doped Eu3+ phosphor

In this article we report Eu³⁺ luminescence in novel K₃Ca₂(SO₄)₃Cl phosphors prepared by wet chemical methods. The Eu³⁺ emission was observed at 594 nm and 615 nm, keeping the excitation wavelength constant at 396 nm nearer to light‐emitting diode excitation, Furthermore, phosphors were characterized by X‐ray diffraction for the confirmation of crystallinity. The variation of the photoluminescence intensity with impurity concentration has also been discussed. Thus, prominent emission in the red region makes prepared phosphors more applicable for white light‐emitting diodes. Copyright © 2013 John Wiley & Sons, Ltd.     

White light emission and energy transfer of LaMgAl11O19:Eu3+, Tb3+ phosphors

White-light-tunable LaMgAl₁₁O₁₉:x%Tb³⁺, y%Eu³⁺ series phosphors were prepared using the gel-combustion method. The structure and luminescence properties were studied, and the energy transfer of Eu³⁺ and Tb³⁺ in the LaMgAl₁₁O₁₉ system was also discussed. The results showed that the LaMgAl₁₁O₁₉ matrix exhibited strong emission in the blue-light region under the excitation of ultraviolet light, which resulted in conditions suitable for the preparation of white-light-tunable phosphors. The emission spectra of LaMgAl₁₁O₁₉:2%Tb³⁺, y%Eu³⁺ (y = 2%–9%) series phosphors were obtained through optimization experiments. It could be seen from the CIE diagram that by adjusting the doping quantities of Eu³⁺ and Tb³⁺ in the LaMgAl₁₁O₁₉ host, multicolor luminescence and white light emission in a single host could be achieved. By calculating the energy transfer efficiency and critical distance between Eu³⁺ and Tb³⁺ series phosphors, the mechanism of energy transfer between Tb³⁺ and Eu³⁺ was found to be the interaction between electric quadruples.     

Molten salt synthesis and luminescence of Dy3+‐doped Y3Al5O12 phosphors

Dy³⁺‐doped Y₃Al₅O₁₂ phosphors were prepared at a relatively low temperature using molten salt synthesis. The phase of the prepared Dy³⁺‐doped Y₃Al₅O₁₂ phosphors was confirmed using X‐ray powder diffraction. Results indicated that Dy³⁺ doping did not change the Y₃Al₅O₁₂ phase. Following excitation at 352 nm, emission spectra of the Dy³⁺‐doped Y₃Al₅O₁₂ phosphors consisted of blue, yellow, and red emission bands. The influence of Dy³⁺ concentration and excitation wavelength on emission was investigated. The ratio of yellow light to blue light varied with change in Dy³⁺ doping concentration, due to changes in the structure around Dy³⁺. Emission intensities also changed when the excitation wavelength was changed. This variation is luminescence generated a system for tunable white light for Dy³⁺‐doped Y₃Al₅O₁₂ phosphors.     

Rapid synthesis of BaMoO4:Eu3+ red phosphors using microwave irradiation

This study synthesized BaMoO4:Eu³⁺ red phosphors using the microwave method. In addition, the phase composition, morphology, and luminescence properties of the red phosphors were characterized using X-ray diffraction, field-scanning electron microscopy, and photoluminescence spectroscopy. The results revealed that doping red phosphors with different concentrations of Eu³⁺ does not change the crystal structure of the matrix material. The BaMoO₄:Eu³⁺ phosphors exhibited micron-scale irregular polyhedra, which could be excited by ultraviolet light with a wavelength of 395 nm to induce red-light emission. The optimal dosage of Eu³⁺ was 0.08, and the chromaticity coordinates of BaMoO₄:0.08Eu³⁺ phosphors were (0.5869, 0.3099). White light-emitting diode (w-LED) devices manufactured by using a combination of BaMoO₄:0.08Eu³⁺ phosphor and commercially available phosphors exhibited good white-light emission under the excitation of an ultraviolet chip. The BaMoO₄:0.08Eu³⁺ red phosphors that rapidly synthesized under the microwave field are expected to be used in w-LED devices.     

The high thermal stability of white emitting phosphor Mg2Y2Al2Si2O12:Dy3+,Eu3+,La3+/Lu3+ for white light emitting diodes

A series of Mg₂Y₂Al₂Si₂O₁₂:Dy³⁺,Eu³⁺ was prepared using a solid-state method, and the phosphor emitted white light by tuning the ratio of Dy³⁺/Eu³⁺. The effects of La³⁺/Lu³⁺ on the structure and luminescence properties of Mg₂Y₂Al₂Si₂O₁₂:Dy³⁺,Eu³⁺ were explored. Under the influence of bond length and twist, the luminescence intensity of the materials increased first and then decreased under excitation with ultraviolet light. The lattice distortion of the trivalent cation La³⁺-substituted Mg₂Y₂Al₂Si₂O₁₂:Dy³⁺ and Eu³⁺ phosphors was reduced, the symmetry of polyhedron occupied by the luminescence centre improved, and the thermal stability of the luminescence centre improved to a certain extent. White light emitting diodes (LEDs) were fabricated by combining a 370 nm LED chip and the Mg₂Y₂Al₂Si₂O₁₂:Dy³⁺,Eu³⁺,La³⁺ (Mg₂Y₂Al₂Si₂O₁₂:Dy³⁺,Eu³⁺,Lu³⁺) phosphor. The results showed that Mg₂Y₂Al₂Si₂O₁₂:Dy³⁺,Eu³⁺,La³⁺/Lu³⁺ may have potential application in the area of white LEDs.     

Photoluminescence characteristics of novel Sm3+ ions-doped La1.4Al22.6O36 phosphor for n-UV w-LED

The combustion procedure was used to synthesize La_1.4Al_22.6O₃₆:Sm³⁺ phosphors. The X-ray diffraction (XRD) patterns and morphological and photoluminescence properties were investigated. The XRD patterns consisted of a hexagonal crystal structure. At 405 nm, the maximum excitation intensity was obtained. Following 405 nm excitation, three different emission peaks at 573, 604, and 651 nm were seen. Concentration quenching occurred at 1.5 mol% Sm³⁺ ions. The Commission Internationale de l'éclairage coordinates for the La_1.4Al_22.6O₃₆ phosphor with Sm³⁺ doping were 604 nm (x = 0.644, y = 0.355) falling in the red region. The findings implied that the prepared phosphor may be used to develop w-light-emitting diodes.     

Preparation and luminescence properties of KLaSiO4:Tb3+ phosphors

KLaSiO₄:Tb³⁺ phosphors were synthesized using the sol–gel method. The structure and luminescence properties of the materials were characterized using X-ray diffraction, Fourier transform infrared (FTIR) spectroscopy, thermogravimetry–differential thermal analysis, fluorescence spectra and calculated Commission Internationale de l'éclairage coordinates. The results showed that the material had a hexagonal structure, and that doping of Tb³⁺ did not change the crystal structure of KLaSiO₄. FTIR spectroscopy confirmed the existence of stretching vibrations of Si–O, bending vibrations of Si–O–Si, and asymmetric tensile vibrations of Si–O in KLaSiO₄. The excitation spectrum of the sample consisted of 4f⁷→5d¹ broadband absorption and the characteristic excitation peak of Tb³⁺, the excitation peak at 232 nm belongs to the spin allowed ⁷F_J→⁷D_J transition of Tb³⁺, the excitation peak at 268 nm belongs to the spin forbidden ⁷F_J→⁹D_J transition of Tb³⁺, and the absorption band of ⁷F_J→⁷D_J transition is split. Under excitation at 232 nm, the emission peak of the sample was composed of the ⁵D₄→⁷F_J (J = 6, 5, 4, 3) energy level transition of Tb³⁺. The highest emission peak is located at 543 nm, which belongs to the ⁵D₄→⁷F₅ transition and emits green light. Concentration quenching occurred when the Tb³⁺ doping concentration was greater than 1% mol, the quenching mechanism was an electric dipole–electric dipole action. When the ratio of citric acid to total metal ions was 1:1 and the annealing temperature was 800°C, the surface defects of the phosphors were greatly reduced, the quenching effect was reduced, and the luminous intensity reached the maximum.     

Novel red colour emitting Ca0.995Mg2(SO4)3:0.5Eu2+ phosphor under ultraviolet,blue, and green excitation for plant growth LEDs

In the recent few years, Eu²⁺- and Mn⁴⁺-activated phosphors are widely used as potential colour converters for indoor plant cultivation lighting application due to their marvellous luminescence characteristics as well as low cost. In this investigation, we synthesized novel red colour-emitting Ca_(2−x)Mg₂(SO₄)₃:xmol% Eu²⁺ (x = 0–1.0 mol%) phosphors via a solid-state reaction method in a reducing atmosphere. The photoluminescence (PL) excitation spectra of synthesized phosphors exhibited a broad excitation band with three excitation bands peaking at 349 nm, 494 nm, and 554 nm. Under these excitations, emission spectra exhibited a broad band in the red colour region at ~634 nm. The PL emission intensity was measured for different concentrations of Eu²⁺. The maximum Eu²⁺ doping concentration in the Ca₂Mg₂(SO₄)₃ host was observed for 0.5 mol%. According to Dexter theory, it was determined that dipole–dipole interaction was responsible for the concentration quenching. The luminous red colour emission of the sample was confirmed using Commission international de l'eclairage colour coordinates. The results of PL excitation and emission spectra of the prepared phosphors were well matched with excitation and emission wavelengths of phytochrome P_R. Therefore, from the entire investigation and obtained results it was concluded that the synthesized Ca_0.995Mg₂(SO₄)₃:0.5mol%Eu²⁺ phosphor has huge potential for plant cultivation application.     

Tunable emission,energy transfer and charge compensation in SrMoO4:Sm3+,Tb3+,Na+ phosphor

A series of SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ phosphors was synthesized using a high‐temperature solid‐state reaction method in air. On excitation at 290 nm, SrMoO₄:Sm³⁺,Tb³⁺ phosphor emitted light that varied systematically from green to reddish‐orange on changing the Sm³⁺ and Tb³⁺ ion concentrations. The emission intensities of SrMoO₄:Sm³⁺ and SrMoO₄:Sm³⁺,Tb³⁺ phosphors were increased two to four times due to charge compensation when Na⁺ was added as a charge compensator. The luminescence mechanism and energy transfer could be explained using energy‐level diagrams of the MoO₄^2– group, Sm³⁺ and Tb³⁺ ions. SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ could be used as reddish‐orange phosphor in white light‐emitting diodes (LEDs) based on an ~ 405 nm near‐UV LED chip. This research is helpful in adjusting and improving the luminescence properties of other phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescent properties and energy transfer in the green phosphors LaBSiO5:Tb3+,Ce3+

LaBSiO₅ phosphors doped with Ce³⁺ and Tb³⁺ were synthesized using the conventional solid‐state method at 1100 °C. The phase purity and luminescent properties of these phosphors are investigated. LaBSiO₅:Tb³⁺ phosphors show intense green emission, and LaBSiO₅ phosphors doped with Ce³⁺ show blue–violet emission under UV light excitation. LaBSiO₅ phosphors co‐doped with Ce³⁺ and Tb³⁺ exhibit blue–violet and green emission under excitation by UV light. The blue–violet emission is due to the 5d–4f transition of Ce³⁺ and the green emission is ascribed to the ⁵D₄ → ⁷ F₅ transition of Tb³⁺. The spectral overlap between the excitation band of Tb³⁺ and the emission band of Ce³⁺ supports the occurrence of energy transfer from Ce³⁺ to Tb³⁺, and the energy transfer process was investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

UV or blue light excited red persistent perovskite phosphor with millisecond lifetime for use in AC‐LEDs

Energy storage phosphors with millisecond period afterglow that compensate for the diming time of alternating current light‐emitting diodes (AC‐LEDs) have promising application. To obtain a persistent luminescence (PersL) white colour in AC‐LEDs, we focussed on a red afterglow with short period phosphorescence. Ca₄Ti₃O₁₀ forms a type of perovskite‐related Ruddlesden–Popper phase structure. Doping Pr³⁺ ions into Ca₄Ti₃O₁₀, an ideal red PersL was obtained. X‐ray diffraction and element analysis demonstrated that our target samples were crystallized well. Steady‐state and afterglow luminescence properties were investigated in detail. Notably, the PersL intensity was dependent on various excitation wavelengths. By measuring three‐dimensional thermoluminescence spectra, we found that the trap depths showed a continuous distribution and that the shallowest trap contributed to the millisecond afterglow. Two PersL mechanism models were used to elucidate the electron charging and de‐trapping processes under UV or blue light activation.     

Synthesis and photoluminescence properties of red emitting phosphor La2–xEuxLi0.5Al0.5O4 [x = 0.2–2] with K2NiF4 structure

Europium (Eu)³⁺‐substituted La₂Li_0.5Al_0.5O₄ red emitting phosphors were prepared by a conventional high‐temperature solid‐state reaction method. Powder X‐ray diffraction, diffuse reflectance spectra and spectrofluorometry were used as vital characterizing tools for the phosphors. The Eu concentration dependence luminescence properties and Judd–Ofelt intensity parameters were investigated and calculated, respectively. All compositions showed an orange red emission (due to the magnetic and electric dipole transitions of the Eu³⁺ ion) with the appropriate Commission Internationale de l'Eclairage (CIE) colour gamut under near ultraviolet or blue ray light excitation. The calculated critical distance showed that the energy transfer occured between Eu to Eu via an exchange mechanism. The Eu_1.4La_0.6Li_0.5Al_0.5O₄ composition showed the highest red emission intensity with CIE colour saturation compared with that of the commercial Eu‐activated yttrium oxysulfide red phosphor.     

Impact of ligand environment on optical,luminescence and thermometric behavior of A3(PO4)2:Sm3+ (A = Ca,Sr) phosphors

The present study investigates the impact of the ligand environment on the luminescence and thermometric behavior of Sm³⁺ doped A₃(PO₄)₂ (A = Sr, Ca) phosphors prepared by combustion synthesis. The structural and luminescent properties of Sm³⁺ ions in the phosphate lattices were investigated using powder X-ray diffraction (PXRD) and photoluminescence (PL) techniques. PXRD results of the synthesized phosphors exhibit the expected phases that are in agreement with their respective standards. Fourier-transform infrared (FTIR) spectroscopy confirms the presence of PO₄ vibrational bands. Upon excitation with near ultraviolet light, the PL studies indicated that Sr₃(PO₄)₂:Sm³⁺ phosphors exhibit a yellow light emission, whereas Ca₃(PO₄)₂:Sm³⁺ phosphors exhibit an emission of orange light. The PL emission results are in accordance with the CIE coordinates, with the Sr₃(PO₄)₂:Sm³⁺ phosphors showing coordinates of (0.56, 0.44), and the Ca₃(PO₄)₂:Sm³⁺ phosphors displaying coordinates of (0.60, 0.40). Thermal analysis shows improved stability of Ca₃(PO₄)₂:Sm³⁺ based on lower weight reduction in thermogravimetric analysis. The effect of temperature on the luminescence properties of the phosphor has been examined upon a 405 nm excitation. By using the fluorescence intensity ratio (FIR) method, the temperature responses of the emission ratios from the Sm³⁺: the ⁴F_3/2 → ⁶H_5/2 transition to the ⁴G_5/2 → ⁶H_7/2 and ⁴F_3/2 → ⁶H_5/2 transition to the ⁴G_5/2 → ⁶H_9/2 emissions are characterized. The Ca₃(PO₄)₂:Sm³⁺ phosphors are more sensitive as compared with the Sr₃(PO₄)₂:Sm³⁺ phosphors. The earlier research findings strongly indicate that these phosphors hold great promise as ideal candidates for applications in non-invasive optical thermometry and solid-state lighting devices.     

Luminescence properties of a novel red phosphor 6LaPO4–3La3PO7–2La7P3O18:Eu3+

Eu³⁺‐doped 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈ red luminescent phosphors were synthesized by co‐deposition and high‐temperature solid‐state methods and its polyphase state was confirmed by X‐ray diffraction analysis. Transmission electron microscopy showed the grain morphology as a mixture of rods and spheres. Luminescence properties of the phosphor were investigated and its red emission parameters were evaluated as a function of Eu³⁺ concentration (3.00–6.00 mol%). Excitation spectra of 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:Eu³⁺ showed strong absorption bands at 280, 395, and 466 nm, while the luminescence spectra exhibited prominent red emission peak centred at 615 nm (⁵D₀→⁷F₂) in the red region. CIE chromaticity coordinates of the 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:5%Eu³⁺ phosphor were (0.668, 0.313) in the red region, and defined its potential application as a red phosphor.     

Tunable photoluminescence properties of Sr1‐yCayMoO4:Sm3+ phosphors (0 ≤ y < 1)

A series of Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors was synthesized by a conventional solid‐state reaction method in air, and their structural and spectroscopic properties were investigated. The optimal doping concentration of Sm³⁺ in SrMoO₄:Sm³⁺ phosphor is 5 mol%. Under excitation with 275 nm, in Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors, the emission band of the host was found to overlap with the excitation bands peaking at ~500 nm of Sm³⁺ ion, and the energy transfer from MoO₄^2? group to Sm³⁺ ion can also be observed. The International Commission on Illumination (CIE) chromaticity coordinates of Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation 275 nm varied systematically from an orange (0.4961, 0.3761) (y = 0) to a white color (0.33, 0.3442) (y = 0.95) with increasing calcium oxide (CaO) concentration. However, Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation at 404 nm only showed red emission and the energy transfer between MoO₄^2? group to Sm³⁺ ion was not observed. The complex mechanisms of luminescence and energy transfer are discussed by energy level diagrams of MoO₄^2? group and Sm³⁺ ion. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence in Ba2Sr2Al2O7:RE (RE = Tb3+,Eu3+ and Dy3+) novel aluminate phosphors

The luminescence of novel rare earth ( Tb ^{3 +} , Eu ^{3 +} and Dy ^{3 +} )‐activated Ba ₂ Sr ₂ Al ₂ O ₇ phosphors for solid‐state lighting is presented. The aluminate phosphors were synthesized using a one‐step combustion method. X‐Ray diffraction, scanning electron microscopy and photoluminescence characterizations were performed to understand the mechanism of excitation and the corresponding emission in the as‐prepared phosphor, as characterized the phase purity and microstructure. Improvements in the luminescence properties of the phosphors with rare earth concentration were observed. The phosphor hue could be tuned from blue, green and red by proper selection of rare earth ions in typical concentrations. Effective absorption in the near‐ultraviolet region was observed, which makes the phosphor a potential candidate for ultraviolet light‐emitting diodes. Copyright © 2016 John Wiley & Sons, Ltd.