High‐Performance All‐Solid‐State Lithium–Sulfur Batteries Enabled by Amorphous Sulfur‐Coated Reduced Graphene Oxide Cathodes

Safety and the polysulfide shuttle reaction are two major challenges for liquid electrolyte lithium–sulfur (Li–S) batteries. Although use of solid‐state electrolytes can overcome these two challenges, it also brings new challenges by increasing the interface resistance and stress/strain. In this work, the interface resistance and stress/strain of sulfur cathodes are significantly reduced by conformal coating ≈2 nm sulfur (S) onto reduced graphene oxide (rGO). An Li–S full cell consisting of an rGO@S‐Li₁₀GeP₂S₁₂‐acetylene black (AB) composite cathode is evaluated. At 60 °C, the all‐solid‐state Li–S cell demonstrates a similar electrochemical performance as in liquid organic electrolyte, with high rate capacities of 1525.6, 1384.5, 1336.3, 903.2, 502.6, and 204.7 mA h g^?1 at 0.05, 0.1, 0.5, 1.0, 2.0, and 5.0 C, respectively. It can maintain a high and reversible capacity of 830 mA h g^?1 at 1.0 C for 750 cycles. The uniform distribution of the rGO@S nanocomposite in the Li₁₀GeP₂S₁₂‐AB matrix generates uniform volume changes during lithiation/delithiation, significantly reducing the stress/strain, thus extending the cycle life. Minimization of the stress/strain of solid cells is the key for a long cycle life of all‐solid‐state Li–S batteries.     

Understanding the Reactivity of a Thin Li1.5Al0.5Ge1.5(PO4)3 Solid‐State Electrolyte toward Metallic Lithium Anode

The thickness of solid‐state electrolytes (SSEs) significantly affects the energy density and safety performance of all‐solid‐state lithium batteries. However, a sufficient understanding of the reactivity toward lithium metal of ultrathin SSEs (<100 µm) based on NASICON remains lacking. Herein, for the first time, a self‐standing and ultrathin (70 µm) NASICON‐type Li_1.5Al_0.5Ge_1.5(PO₄)₃ (LAGP) electrolyte via a scalable solution process is developed, and X‐ray photoelectron spectroscopy reveals that changes in LAGP at the metastable Li–LAGP interface during battery operation is temperature dependent. Severe germanium reduction and decrease in LAGP particle size are detected at the Li–LAGP interface at elevated temperature. Oriented plating of lithium metal on its preferred (110) face occurs during in situ X‐ray diffraction cycling.     

Building Lithiophilic Ion‐Conduction Highways on Garnet‐Type Solid‐State Li+ Conductors

The integration of highly conductive solid‐state electrolytes (SSEs) into solid‐state cells is still a challenge mainly due to the high impedance existing at the electrolyte/electrode interface. Although solid‐state garnet‐based batteries have been successfully assembled with the assistance of an intermediate layer between the garnet and the Li metal anode, the slow discharging/charging rates of the batteries inhibits practical applications, which require much higher power densities. Here, a crystalline sulfonated‐covalent organic framework (COF) thin layer is grown on the garnet surface via a simple solution process. It not only significantly improves the lithiophilicity of garnet electrolytes via the lithiation of the COF layer with molten Li, but also creates effective Li⁺ diffusion “highways” between the garnet and the Li metal anode. As a result, the interfacial impedance of symmetric solid‐state Li cells is significantly decreased and the cells can be operated at high current densities up to 3 mA cm^?2, which is difficult to achieve with current interfacial modification technologies for SSEs. The solid‐state Li‐ion batteries using LiFePO₄ cathodes, Li anodes, and COF‐modified garnet electrolytes thus exhibit a significantly improved rate capability.     

Lithium/Oxygen Incorporation and Microstructural Evolution during Synthesis of Li‐Rich Layered Li[Li0.2Ni0.2Mn0.6]O2 Oxides

As promising cathode materials, the lithium‐excess 3d‐transition‐metal layered oxides can deliver much higher capacities (>250 mAh g^?1 at 0.1 C) than the current commercial layered oxide materials (≈180 mAh g^?1 at 0.1 C) used in lithium ion batteries. Unfortunately, the original formation mechanism of these layered oxides during synthesis is not completely elucidated, that is, how is lithium and oxygen inserted into the matrix structure of the precursor during lithiation reaction? Here, a promising and practical method, a coprecipitation route followed by a microwave heating process, for controllable synthesis of cobalt‐free lithium‐excess layered compounds is reported. A series of the consistent results unambiguously confirms that oxygen atoms are successively incorporated into the precursor obtained by a coprecipitation process to maintain electroneutrality and to provide the coordination sites for inserted Li ions and transition metal cations via a high‐temperature lithiation. It is found that the electrochemical performances of the cathode materials are strongly related to the phase composition and preparation procedure. The monoclinic layered Li[Li_0.2Ni_0.2Mn_0.6]O₂ cathode materials with state‐of‐the‐art electrochemical performance and comparably high discharge capacities of 171 mAh g^?1 at 10 C are obtained by microwave annealing at 750 °C for 2 h.     

Constructing Multifunctional Interphase between Li1.4Al0.4Ti1.6(PO4)3 and Li Metal by Magnetron Sputtering for Highly Stable Solid‐State Lithium Metal Batteries

Due to high ionic conductivity and low cost, Li_1.4Al_0.4Ti_1.6(PO₄)₃ (LATP) has emerged as a promising solid‐state electrolyte for next‐generation lithium (Li) metal solid‐state batterie with high safety performance and energy density. However, the extremely high impedance and surface instability of LATP with Li metal retard its practical application. Herein, a novel method is proposed to construct an ultrathin ZnO layer that is tightly coated on the LATP pellets, surface (ZnO@LATP) via magnetron sputtering, which in situ reacts with Li to form a low electronic conductivity and multifunctional solid electrolyte interphase (SEI). The formed SEI can not only effectively lower the interfacial resistance, but also overcome the side reactions of LATP with the Li metal anode and suppress the Li dendrite growth. Specifically, the interface resistance decreases from 80 554 to 353 Ω and the overpotential reduces from 1 V to 20 mV. As a result, the Li/ZnO@LATP@ZnO/Li symmetric batteries can stably cycle for more than 2000 h without short circuit at 0.05 mA cm^?2 and Li/ZnO@LATP/LiFePO₄ batteries show excellent cycle stability for 200 cycles at 0.1 C. This work highlights the significance of multifunctional interphase between LATP and Li metal for improvement of interfacial impedance and instability.     

Lithiophilic CuO Nanoflowers on Ti‐Mesh Inducing Lithium Lateral Plating Enabling Stable Lithium‐Metal Anodes with Ultrahigh Rates and Ultralong Cycle Life

Lithium (Li) metal anodes are promising candidates for high‐energy‐density batteries. However, uncontrollable dendritic plating behavior and infinite volume expansion are hindering their practical applications. Herein, a novel CuO@Ti‐mesh (CTM) is prepared by microwave‐assisted reactions, followed by pressing on Li wafers, leading to Li/CuO@Ti‐mesh (LCTM) composite anodes. The lithiophilic CuO nanoflowers on Ti‐mesh provides evenly distributed nucleation sites, inducing uniform Li‐ion lateral plating, which can effectively inhibit the growth of Li dendrites and volume expansion during cycling. The as‐prepared LCTM composite anode exhibits high Coulombic efficiency (CE) of 94.2% at 10 mA cm^‐2 over 90 cycles. Meanwhile, the LCTM anode shows a low overpotential of 50 mV at 10 mA cm^‐2 over 16 000 cycles and a low overpotential of 90 and 250 mV even at ultrahigh current densities of 20 and 40 mA cm^‐2. When paired with Li₄Ti₅O₁₂ (LTO), it enhances the capacity retention of LTO/Li wafer full cells by about two times from 36.6% to 73.0% and 42.0% to 80.0% at 5C and 10C with long‐term cycling. It is hoped that this LCTM anode with ultrahigh rates and ultralong cycle life may put Li‐metal anode forward to practical applications, such as in Li–S, Li‐air batteries, etc.     

Ultrathin Bilayer of Graphite/SiO2 as Solid Interface for Reviving Li Metal Anode

Lithium metal anodes are expected to drive practical applications that require high energy‐density storage. However, the direct use of metallic lithium causes safety concerns, low rate capabilities, and poor cycling performance due to unstable solid electrolyte interphase (SEI) and undesired lithium dendrite growth. To address these issues, a radio frequency sputtered graphite‐SiO₂ ultrathin bilayer on a Li metal chips is demonstrated, for the first time, as an effective SEI layer. This leads to a dendrite free uniform Li deposition to achieve a stable voltage profile and outstanding long hours plating/stripping compared to the bare Li. Compared to a bare Li anode, the graphite‐SiO₂ bilayer modified Li anode coupled with lithium nickel cobalt manganese oxide cathode (NMC111) and lithium titanate shows improved capacity retention, higher capacity at higher rates, longer cycling stability, and lower voltage hysteresis. Graphite acts as an electrical bridge between the plated Li and Li electrode, which lowers the impedance and buffers the volume expansion during Li plating/stripping. Adding an ultrathin SiO₂ layer facilitates Li‐ion diffusion and lithiation/delithiation, provides higher electrolyte affinity, higher chemical stability, and higher Young's modulus to suppress the Li dendrite growth.     

Multifunctional Silanization Interface for High‐Energy and Low‐Gassing Lithium Metal Pouch Cells

Lithium (Li) metal has attracted unprecedented attention as the ultimate anode material for future rechargeable batteries, but the electrochemical behavior (such as Li dendrites and gassing problems) in real Li metal pouch cells has received little attention. To achieve realistic high‐energy Li metal batteries, the designed solid electrolyte interface to suppress both Li dendrites and catastrophic gassing problems is urgently needed at cell level. Here, an efficient multifunctional silanization interface (MSI) is proposed for high‐energy Li metal pouch cells. Such an MSI not only guides uniform nucleation and growth of Li metal but also suppresses interfacial parasitic reactions between Li metal and electrolyte. As a result, under harsh conditions (negative to positive electrode capacity ratio of 2.96 and electrolyte weight to cathode capacity ratio of 2.7 g Ah^?1), a long‐running lifespan (over 160 cycles with a capacity retention of 96% at 1 C), and low‐gassing behavior of realistic high‐energy Li metal pouch cell (1 Ah, 300 Wh kg^?1) is achieved. This work opens a promising avenue toward the commercial applications of high‐energy Li metal batteries.     

In Situ TEM Observation of Electrochemical Lithiation of Sulfur Confined within Inner Cylindrical Pores of Carbon Nanotubes

Lithium insertion into sulfur confined within 200 nm cylindrical inner pores of individual carbon nanotubes (CNTs) was monitored in situ in a transmission electron microscope (TEM). This electrochemical reaction was initiated at one end of the S‐filled CNTs. The material expansion during lithiation was accommodated by the expansion into the remaining empty pore volume and no fracture of the CNT walls was detected. A sharp interface between the initial and lithiated S was observed. The reaction front was flat, oriented perpendicular to the confined S cylinder, and propagated along the cylinder length. Lithiation of S in the proximity of conductive carbon proceeded at the same rate as the one in the center of the pore, suggesting the presence of electron pathways at the Li₂S/S interface. Density of states calculations further confirmed this hypothesis. In situ electron diffraction showed a direct phase transformation of S into nanocrystalline Li₂S without detectable formation of any intermediates, such as polysulfides and LiS. These important insights may elucidate some of the reaction mechanisms and guide the improvements in the design of C–S nanocomposites for high specific energy Li–S batteries. The proposed use of conductive CNTs with tunable pore diameter as cylindrical reaction vessels for in situ TEM studies of electrochemical reactions proved to be highly advantageous and may help to resolve the ongoing problems in battery technology.     

Highly Dispersed Cobalt Clusters in Nitrogen‐Doped Porous Carbon Enable Multiple Effects for High‐Performance Li–S Battery

The lithium–sulfur (Li–S) battery is considered a promising candidate for the next generation of energy storage system due to its high specific energy density and low cost of raw materials. However, the practical application of Li–S batteries is severely limited by several weaknesses such as the shuttle effect of polysulfides and the insulation of the electrochemical products of sulfur and Li₂S/Li₂S₂. Here, by doping nitrogen and integrating highly dispersed cobalt catalysts, a porous carbon nanocage derived from glucose adsorbed metal–organic framework is developed as the host for a sulfur cathode. This host structure combines the reported positive effects, including high conductivity, high sulfur loading, effective stress release, fast lithium‐ion kinetics, fast interface charge transport, fast redox of Li₂S_n, and strong physical/chemical absorption, achieving a long cycle life (86% of capacity retention at 1C within 500 cycles) and high rate performance (600 mAh g^?1 at 5C) for a Li–S battery. By combining experiments and density functional theoretical calculations, it is demonstrated that the well‐dispersed cobalt clusters play an important role in greatly improving the diffusion dynamics of lithium, and enhance the absorption and conversion capability of polysulfides in the host structure.     

Li–Ti Cation Mixing Enhanced Structural and Performance Stability of Li‐Rich Layered Oxide

Li‐rich layered metal oxides are one type of the most promising cathode materials in lithium‐ion batteries but suffer from severe voltage decay during cycling because of the continuous transition metal (TM) migration into the Li layers. A Li‐rich layered metal oxide Li_1.2Ti_0.26Ni_0.18Co_0.18Mn_0.18O₂ (LTR) is hereby designed, in which some of the Ti⁴⁺ cations are intrinsically present in the Li layers. The native Li–Ti cation mixing structure enhances the tolerance for structural distortion and inhibits the migration of the TM ions in the TMO₂ slabs during (de)lithiation. Consequently, LTR exhibits a remarkable cycling stability of 97% capacity retention after 182 cycles, and the average discharge potential drops only 90 mV in 100 cycles. In‐depth studies by electron energy loss spectroscopy and aberration‐corrected scanning transmission electron microscopy demonstrate the Li–Ti mixing structure. The charge compensation mechanism is uncovered with X‐ray absorption spectroscopy and explained with the density function theory calculations. These results show the superiority of introducing transition metal ions into the Li layers in reinforcing the structural stability of the Li‐rich layered metal oxides. These findings shed light on a possible path to the development of Li‐rich materials with better potential retention and a longer lifespan.     

Dopant‐Dependent Stability of Garnet Solid Electrolyte Interfaces with Lithium Metal

Li₇La₃Zr₂O₁₂ (LLZO) garnet‐based materials doped with Al, Nb, or Ta to stabilize the Li⁺‐conductive cubic phase are a particularly promising class of solid electrolytes for all‐solid‐state lithium metal batteries. Understanding of the intrinsic reactivity between solid electrolytes and relevant electrode materials is crucial to developing high voltage solid‐state batteries with long lifetimes. Using a novel, surface science‐based approach to characterize the intrinsic reactivity of the Li–solid electrolyte interface, it is determined that, surprisingly, some degree of Zr reduction takes place for all three dopant types, with the extent of reduction increasing as Ta < Nb < Al. Significant reduction of Nb also takes place for Nb‐doped LLZO, with electrochemical impedance spectroscopy (EIS) of Li||Nb–LLZO||Li symmetric cells further revealing significant increases in impedance with time and suggesting that the Nb reduction propagates into the bulk. Density functional theory (DFT) calculations reveal that Nb‐doped material shows a strong preference for Nb dopants toward the interface between LLZO and Li, while Ta does not exhibit a similar preference. EIS and DFT results, coupled with the observed reduction of Zr at the interface, are consistent with the formation of an “oxygen‐deficient interphase” (ODI) layer whose structure determines the stability of the LLZO–Li interface.     

3D TiC/C Core/Shell Nanowire Skeleton for Dendrite‐Free and Long‐Life Lithium Metal Anode

Construction of stable dendrite‐free Li metal anode is crucial for the development of advanced Li–S and Li–air batteries. Herein, self‐supported TiC/C core/shell nanowire arrays as skeletons and confined hosts of molten Li forming integrated trilayer TiC/C/Li anode are described. The TiC/C core/shell nanowires with diameters of 400–500 nm exhibit merits of good lithiophilicity, high electrical conductivity, and abundant porosity. The as‐prepared TiC/C/Li anode exhibits prominent electrochemical performance with a small hysteresis of less than 85 mV beyond 200 cycles (3.0 mA cm^?2) as well as a very high Coulombic efficiency up to 98.5% for 100 cycles at 1.0 mA cm^?2. When the structured anode is coupled with lithium iron phosphate or sulfur cathode, the assembled full cells with trilayer TiC/C/Li anodes display enhanced capability retention and improved Coulombic efficiency. This is ascribed to the unique TiC/C matrix, which can not only provide interspace for accommodating “hostless” Li, but also afford interconnected rapid transfer paths for electrons and ions with low local current densities, leading to effective inhabitation growth of Li dendrites and lower interfacial resistance. A fresh way for construction of advanced stable Li metal anodes is provided in this work.     

Self-Regulating Interfacial Space Charge through Polyanion Repulsion Effect towards Dendrite-Free Polymer Lithium-Metal Batteries

Uncontrolled transport of anions leads to many issues, including concentration polarization, excessive interface side reactions, and space charge-induced lithium dendrites at the anode/electrolyte interface, which severely deteriorates the cycling stability of lithium metal batteries. Herein, an asymmetrical polymer electrolyte modified by a boron-containing single-ion conductor (LiPVAOB), is designed to inhibit the nonuniform aggregation of free anions in the vicinity of the lithium anode through the repulsion effect improving the lithium-ion transference number to 0.63. This LiPVAOB exerts a repulsion interaction with free anions even at a long distance and a selective effect for free anions transport, which diminishes uneven aggregation of free anions at the interface and suppresses space charges-induced lithium dendrites growth. Consequently, the assembled Li||Li cell delivers an ultra-long cycle for over 5400 h. The Li||LiFePO₄ cell exhibits outstanding cycle performance with a capacity retention of 93% over 4500 cycles. In particular, the assembled high-voltage Li||Li_1.2Ni_0.2Mn_0.6O₂ cell (charged to 4.8 V) exhibits good cycle stability with a high specific capacity of 245 mAh g⁻¹. This designed polymer electrolyte provides a promising strategy for regulating ion transport to inhibit space charge-induced lithium dendrite growth for high-performance lithium metal batteries.     

Uniform Lithium Deposition Assisted by Single‐Atom Doping toward High‐Performance Lithium Metal Anodes

For a long time lithium (Li) metal has been considered one of the most promising anodes for next‐generation rechargeable batteries. Despite decades of concentrated research, its practical application is still hindered by dendritic Li deposition and infinite volume change of Li metal anodes. Here, atomically dispersed metals doped graphene is synthesized to regulate Li metal nucleation and guide Li metal deposition. The single‐atom (SA) metals, supported on the nitrogen‐doped graphene can not only increase the Li adsorption energy of the localized area around the metal atomic sites with a moderate adsorption energy gradient but also improve the atomic structural stability of the overall materials by constructing a coordination mode of M‐N_x‐C (M, N, and C denoted as metal, nitrogen, and carbon atoms, respectively). As a result, the as‐obtained electrode exhibits an ultralow voltage hysteresis of 19 mV, a high average Coulombic efficiency of 98.45% over 250 cycles, and a stable Li plating/stripping performance even at a high current density of 4.0 mA cm^?2. This work demonstrates the application of SA metal doping in the rational design of Li metal anodes and provides a new concept for further development of Li metal batteries.     

Toward Promising Cathode Catalysts for Nonlithium Metal–Oxygen Batteries

The success of Li–air/O₂ batteries has brought extensive attention to the development of various promising non‐Li metal–O₂ batteries, such as Zn–O₂, Al–O₂, Mg–O₂ batteries, etc., which have exhibited unique advantages, such as low production cost, high energy density, and much enhanced safety. The versatile non‐Li metal–O₂ batteries provide a better opportunity for meeting the practical requirements for sustainable energy supplies in various applications. A high‐performance cathode in non‐Li metal–O₂ batteries that can effectively trigger both oxygen reduction and evolution reactions and thus boost the overall battery performance is of great research interest. In this article, a comprehensive review on the development of Li‐free metal–O₂ batteries and particularly focusing on the oxygen catalytic cathodes for both primary and secondary non‐Li metal–O₂ batteries is carefully performed. The current challenges and potential solutions are also outlined and proposed. Through carefully selecting and rationally designing promising catalytic cathodes, a series of non‐Li metal–oxygen batteries toward practical energy storage applications are highly anticipated.     

Enhanced Cyclability of Lithium–Oxygen Batteries with Electrodes Protected by Surface Films Induced via In Situ Electrochemical Process

Although the rechargeable lithium–oxygen (Li–O₂) batteries have extremely high theoretical specific energy, the practical application of these batteries is still limited by the instability of their carbon‐based air‐electrode, Li metal anode, and electrodes, toward reduced oxygen species. Here a simple one‐step in situ electrochemical precharging strategy is demonstrated to generate thin protective films on both carbon nanotubes (CNTs), air‐electrodes and Li metal anodes simultaneously under an inert atmosphere. Li–O₂ cells after such pretreatment demonstrate significantly extended cycle life of 110 and 180 cycles under the capacity‐limited protocol of 1000 mA h g^?1 and 500 mA h g^?1, respectively, which is far more than those without pretreatment. The thin‐films formed from decomposition of electrolyte during in situ electrochemical precharging processes in an inert environment, can protect both CNTs air‐electrode and Li metal anode prior to conventional Li–O₂ discharge/charge cycling, where reactive reduced oxygen species are formed. This work provides a new approach for protection of carbon‐based air‐electrodes and Li metal anodes in practical Li–O₂ batteries, and may also be applied to other battery systems.     

Evaluation and enhanced operational performance of microbial fuel cells under alternating anodic open circuit and closed circuit modes with different substrates

The present study evaluates the performance of air-cathode microbial fuel cells (MFCs) under alternating open circuit/closed circuit (OC/CC) modes and its effect on independent-electrode and full-cell potentials, power output (at different external resistances) and the polarization behaviour of the electrodes. Three different types of feeds were evaluated using this approach: (1) phosphorus buffer solution (PBS) with acetate as carbon source, (2) glucose-rich synthetic wastewater, and (3) sewage from wastewater treatment plant enriched with fermented molasses. When MFCs were suddenly switched to CC from OC and then again back to OC from CC, the behaviour of the anodes vs reference electrode (Ag/AgCl, 3 M KCl) was monitored. When electric circuit of the MFCs was switched from open to closed circuit, for all cases: (a) the anode potential-shift (vs Ag/AgCl) reallocated in the positive direction in about 200–400 mV, (b) the air-cathode potential-shift (vs Ag/AgCl) reallocated in the negative direction in about 10–25 mV, and (c) the cell-potential difference started at around 0 mV and progressively increased as the MFC reached stability. This behaviour was consistently reproduced during different OC/CC cycles. The systems studied delivered good performance with both controlled media and industrial wastewater. Additionally, this study provides insightful characterization of the independent-electrode behaviours.     

Graphitic Carbon Nitride Induced Micro‐Electric Field for Dendrite‐Free Lithium Metal Anodes

Uncontrolled dendrites resulting from nonuniform lithium (Li) nucleation/growth and Li volume expansion during charging cause serious safety problems for Li anode‐based batteries. Here the coating of nickel foam with graphitic carbon nitride (g‐C₃N₄) to have a 3D current collector (g‐C₃N₄@Ni foam) for dendrite‐free Li metal anodes is reported. The lithiophilic g‐C₃N₄ coupled with the 3D framework is demonstrated to be highly effective for promoting the uniform deposition of Li and suppressing the formation of dendrites. Both density functional theory calculations and experimental studies indicate the formation of a micro‐electric field resulting from the tri‐s‐triazine units of g‐C₃N₄, which induces numerous Li nuclei during the initial nucleation stage, effectively guiding the following Li growth on the 3D Ni foam to be well distributed. Furthermore, the 3D porous framework is favorable for absorbing any volume change and stabilizing the solid–electrolyte interphase layer during repeated Li plating/stripping. As such, a Li metal anode based on the g‐C₃N₄@Ni foam has a remarkable electrochemical performance with a high Coulombic efficiency (98% retention after 300 cycles), an ultralong lifespan up to 900 h, as well as a low overpotential (<15 mV at 1.0 mA cm^?2) at a Li deposition of 9.0 mA h cm^?2.     

High-Areal-Capacity and Long-Cycle-Life All-Solid-State Lithium-Metal Battery by Mixed-Conduction Interface Layer

The rapid growth of lithium dendrites has seriously hindered the development and practical application of high-energy-density all-solid-state lithium metal batteries (ASSLMBs). Herein, a soft carbon (SC)-nano Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) (with high ionic conductivity and diffusion coefficient) mixed ionic and electronic conducting interface layer is designed to promote the rapid migration of Li⁺ at the interfacial layer, induce the uniform deposition of lithium metal on nanoscale (nano) LLZTO ion-conducting network inside the interface layer, effectively suppress the growth of lithium dendrites, and significantly improve the electrochemical performance of ASSLMBs. LiZrO₂@LiCoO₂(LZO@LCO)/Li₆PS₅Cl(LPSCl)-nano LLZTO/Li ASSLMB achieves high current density (12.5 mA cm⁻²), ultra-high areal capacity (15 mAh cm⁻², corresponding to LZO@LCO mass loadings of 111.11 mg cm⁻²), and ultra-long cycle life (20 000 cycles). Therefore, the introduction of SC-nano LLZTO mixed conducting interface layer can greatly improve the interfacial stability between solid-state electrolyte (SSE) and lithium metal anode to enable dendrite-free ASSLMBs.