Involvement of SecDF and YidC in the membrane insertion of M13 procoat mutants

The M13 phage Procoat protein is one of the best characterized substrates for the novel YidC pathway. It inserts into the membrane independent of the SecYEG complex but requires the 60 kDa YidC protein. Mutant Procoat proteins with alterations in the periplasmic region had been found to require SecYEG and YidC. In this report, we show that the membrane insertion of these mutants also strongly depends on SecDF that bridges SecYEG to YidC. In a cold-sensitive mutant of YidC, the Sec-dependent function of YidC is strongly impaired. We find that specifically the SecDF-dependent mutants are inhibited in the cold-sensitive YidC strain. Finally, we find that subtle changes in the periplasmic loop such as the number and location of negatively charged residues and the length of the periplasmic loop can make the Procoat strictly Sec-dependent. In addition, we successfully converted Sec-independent Pf3 coat into a Sec-dependent protein by changing the location of a negatively charged residue in the periplasmic tail. Protease mapping of Pf3 coat shows that the insertion-arrested proteins that accumulate in the YidC- or in the SecDF-deficient strains are not translocated. Taken together, the data suggest that the Sec-dependent mutants insert at the interface of YidC and the translocon with SecDF assisting in the translocation step in vivo.     

Different regions of the nonconserved large periplasmic domain of Escherichia coli YidC are involved in the SecF interaction and membrane insertase activity

The YidC protein of Escherichia coli is required for inserting Sec-independent membrane proteins and has a supportive role for the insertion of Sec-dependent proteins into the membrane bilayer. Because a portion of YidC copurifies with the Sec translocase, this interaction might be necessary to assist in the membrane insertion of Sec-dependent proteins. This study describes a deletion analysis that investigates which parts of YidC are required for its interaction with the SecDF complex of the Sec translocase and for the function of YidC as an insertase for the Sec-dependent membrane proteins. The results suggest that the first periplasmic region, which includes residues 24-346, is required for the interaction of YidC with the Sec translocase, in particular with the SecF protein. Further studies showed that residues 215-265 of YidC are sufficient for SecF binding. Surprisingly, the interaction of YidC with SecF is not critical for cell viability as YidC, lacking residues 24-264, was fully functional to support the growth of E. coli. It was also observed that this YidC mutant was fully functional to insert the Sec-dependent subunit A of the F(1)F(o) ATP synthase and an M13 procoat derivative, as well as the Sec-independent M13 procoat protein and subunit C of the ATP synthase. Only when additional residues of the periplasmic region were deleted (265-346) was the membrane insertase function of YidC inhibited.     

Cysteine residues in the transmembrane regions of M13 procoat protein suggest that oligomeric coat proteins assemble onto phage progeny

The M13 phage assembles in the inner membrane of Escherichia coli. During maturation, about 2,700 copies of the major coat protein move from the membrane onto a single-stranded phage DNA molecule that extrudes out of the cell. The major coat protein is synthesized as a precursor, termed procoat protein, and inserts into the membrane via a Sec-independent pathway. It is processed by a leader peptidase from its leader (signal) peptide before it is assembled onto the phage DNA. The transmembrane regions of the procoat protein play an important role in all these processes. Using cysteine mutants with mutations in the transmembrane regions of the procoat and coat proteins, we investigated which of the residues are involved in multimer formation, interaction with the leader peptidase, and formation of M13 progeny particles. We found that most single cysteine residues do not interfere with the membrane insertion, processing, and assembly of the phage. Treatment of the cells with copper phenanthroline showed that the cysteine residues were readily engaged in dimer and multimer formation. This suggests that the coat proteins assemble into multimers before they proceed onto the nascent phage particles. In addition, we found that when a cysteine is located in the leader peptide at the -6 position, processing of the mutant procoat protein and of other exported proteins is affected. This inhibition of the leader peptidase results in death of the cell and shows that there are distinct amino acid residues in the M13 procoat protein involved at specific steps of the phage assembly process.     

Direct interaction of YidC with the Sec-independent Pf3 coat protein during its membrane protein insertion.

YidC is a newly defined translocase component that mediates the insertion of proteins into the membrane bilayer. How YidC functions in the insertion process is not known. In this study, we report that the Sec-independent Pf3 coat protein requires the YidC protein specifically for the membrane translocation step. Using photocrosslinking techniques and ribosome-bound Pf3 coat derivatives with an extended carboxyl-terminal region, we found that the transmembrane region of the Pf3 coat protein physically interacts with YidC and the bacterial signal recognition particle Ffh component. We also find that in the insertion pathway, Pf3 coat interacts strongly with YidC only after its transmembrane segment is fully exposed outside the ribosome tunnel. Interaction between Pf3 coat and YidC occurs even in the absence of the proton motive force and with a Pf3 coat mutant that is defective in transmembrane insertion. Our study demonstrates that YidC can directly interact with a Sec-independent membrane protein, and the role of YidC is at the stage of folding the Pf3 protein into a transmembrane configuration.     

Distinct requirements for translocation of the N-tail and C-tail of the Escherichia coli inner membrane protein CyoA

Inner membrane proteins (IMPs) of Escherichia coli use different pathways for membrane targeting and integration. YidC plays an essential but poorly defined role in the integration and folding of IMPs both in conjunction with the Sec translocon and as a Sec-independent insertase. Depletion of YidC only marginally affects the insertion of Sec-dependent IMPs, whereas it blocks the insertion of a subset of Sec-independent IMPs. Substrates of this latter "YidC-only" pathway include the relatively small IMPs M13 procoat, Pf3 coat protein, and subunit c of the F(1)F(0) ATPase. Recently, it has been shown that the steady state level of the larger and more complex CyoA subunit of the cytochrome o oxidase is also severely affected upon depletion of YidC. In the present study we have analyzed the biogenesis of the integral lipoprotein CyoA. Collectively, our data suggest that the first transmembrane segment of CyoA rather than the signal sequence recruits the signal recognition particle for membrane targeting. Membrane integration and assembly appear to occur in two distinct sequential steps. YidC is sufficient to catalyze insertion of the N-terminal domain consisting of the signal sequence, transmembrane segment 1, and the small periplasmic domain in between. Translocation of the large C-terminal periplasmic domain requires the Sec translocon and SecA, suggesting that for this particular IMP the Sec translocon might operate downstream of YidC.     

YidC is strictly required for membrane insertion of subunits a and c of the F(1)F(0)ATP synthase and SecE of the SecYEG translocase

YidC was previously discovered to play a critical role for the insertion of the Sec-independent M13 procoat and Pf3 coat phage proteins into the Escherichia coli inner membrane. To determine whether there is an absolute requirement of YidC for membrane protein insertion of any endogenous E. coli proteins, we investigated a few representative membrane proteins. We found that membrane subunits of the F(0) sector of the F(1)F(0)ATP synthase and the SecE protein of the SecYEG translocase are highly dependent on YidC for membrane insertion, based on protease mapping and immunoblot analysis. We found that the SecE dependency on YidC for membrane insertion does not contradict the observation that depletion of YidC does not block SecYEG-dependent protein export at 37 degrees C. YidC depletion does not decrease the SecE level low enough to block export at 37 degrees C. In contrast, we found that protein export of OmpA is severely blocked at 25 degrees C when YidC is depleted, which may be due to the decreased SecE level, as a 50% decrease in the SecE levels drastically affects protein export at the cold temperature [Schatz, P. J., Bieker, K. L., Ottemann, K. M., Silhavy, T. J., and Beckwith, J. (1991) EMBO J. 10, 1749-57]. These studies reported here establish that physiological substrates of YidC include subunits of the ATP synthase and the SecYEG translocase, demonstrating that YidC plays a vital role for insertion of endogenous membrane proteins in bacteria.     

Features of transmembrane segments that promote the lateral release from the translocase into the lipid phase

Topogenic sequences direct the membrane topology of proteins by being recognized and decoded by integral membrane translocases. In this paper, we have compared the minimal sequence characteristics of helical-hairpin, reverse signal-anchor, and stop-transfer sequences in bacterial membrane proteins that use either the YidC or SecYEG translocases for membrane insertion. We find that a stretch composed of 3 leucines and 16 alanines is required for efficient membrane-anchoring of the M13 procoat protein that inserts by a helical hairpin mechanism, and that a stretch composed of only 19 alanines has a detectable membrane-anchoring ability. Similar results were obtained for the reverse signal-anchor sequence of the single-spanning Pf3 coat protein and for stop-transfer segments engineered into leader peptidase. We have also determined the contribution to the apparent free energy of membrane insertion of M13 procoat for all 20 amino acids. The relative order of the contributions is similar to that determined for a stop-transfer sequence in the mammalian endoplasmic reticulum, but the absolute difference between the contributions for the most hydrophobic and most hydrophilic residues is somewhat larger in the E. coli system. These results are significant because they define the features of a membrane protein transmembrane segment that induce lateral release from the YidC and Sec translocases into the lipid bilayer in bacteria.     

Conserved residues of the leader peptide are essential for cleavage by leader peptidase

Gene 8 of bacteriophage M13 codes for procoat, the precursor of its major coat protein. Gene 8 has been cloned into a plasmid and mutagenized. We have isolated mutants of this gene in which procoat is synthesized but is not processed to coat protein. We now describe mutants in the leader region of procoat, at positions -6, -3, and -1 with respect to the leader peptidase cleavage site. These positions are quite conserved among the leader peptides of various pre-proteins. Each of these mutant procoats is synthesized at a normal rate and inserts correctly into the plasma membrane, as judged by its accessibility to protease in intact spheroplasts. Procoat accumulates, largely in its transmembrane form, and is not cleaved to coat. In detergent extracts, the mutant procoats are very poor substrates for added leader peptidase. We conclude that these 3 residues are not conserved for insertion across the membrane but are part of an essential recognition site for the leader peptidase.     

Escherichia coli YidC is a membrane insertase for Sec-independent proteins

YidC is a recently discovered bacterial membrane protein that is related to the mitochondrial Oxa1p and the Alb3 protein of chloroplasts. These proteins are required in the membrane integration process of newly synthesized proteins that do not require the classical Sec machinery. Here we demonstrate that YidC is sufficient for the membrane integration of a Sec-independent protein. Microgram amounts of the purified single-spanning Pf3 coat protein were efficiently inserted into proteoliposomes containing the purified YidC. A mutant Pf3 coat protein with an extended hydrophobic region was inserted independently of YidC into the membrane both in vivo and in vitro, but its insertion was accelerated by YidC. These results show that YidC can function separately from the Sec translocase to integrate membrane proteins into the lipid bilayer.     

Function of YidC for the insertion of M13 procoat protein in Escherichia coli: translocation of mutants that show differences in their membrane potential dependence and Sec requirement.

The membrane insertion of the Sec-independent M13 Procoat protein in bacteria requires the membrane electrochemical potential and the integral membrane protein YidC. We show here that YidC is involved in the translocation but not in the targeting of the Procoat protein, because we found the protein was partitioned into the membrane in the absence of YidC. YidC can function also to promote membrane insertion of Procoat mutants that insert independently of the membrane potential, proving that the effect of YidC depletion is not due to a dissipation of the membrane potential. We also found that YidC is absolutely required for Sec-dependent translocation of a long periplasmic loop of a mutant Procoat in which the periplasmic region has been extended from 20 to 194 residues. Furthermore, when Sec-dependent membrane proteins with large periplasmic domains were overproduced under YidC-limited conditions, we found that the exported proteins pro-OmpA and pre-peptidoglycan-associated lipoprotein accumulated in the cytoplasm. This suggests for Sec-dependent proteins that YidC functions at a late stage in membrane insertion, after the Sec translocase interacts with the translocating membrane protein. These studies are consistent with the understanding that YidC cooperates with the Sec translocase for membrane translocation and that YidC is required for clearing the protein-conducting channel.     

Reconstitution of rapid and asymmetric assembly of M13 procoat protein into liposomes which have bacterial leader peptidase

The leader peptidase of Escherichia coli cleaves a 23-residue leader sequence from M13 procoat to yield mature coat protein in virus-infected cells. We have reconstituted pure leader peptidase into vesicles of E. coli lipids and found that these liposomes are active in the conversion of procoat to coat. Trypsin removes all but 10% of the leader peptidase, yet the vesicles retain nearly full capacity to convert procoat to coat, suggesting that only procoat which inserts across the liposomal membrane is a substrate for leader peptidase. This is confirmed by the finding that over 70% of the coat protein produced by these liposomes spans the membrane. The rate at which leader peptidase inside protease-treated liposomes cleaves externally added procoat is comparable to the rate of procoat cleavage by the same amount of leader peptidase in detergent micelles. Thus, procoat can rapidly integrate across a liposomal membrane and be cleaved to coat protein. These findings confirm the central part of the membrane trigger hypothesis that certain proteins (such as procoat) can cross a bilayer without the aid of a proteinaceous pore or transport system.     

The purification of M13 procoat, a membrane protein precursor.

Many membrane proteins and most secreted proteins are initially made as precursors with an N-terminal leader sequence. We now report the isolation of M13 procoat, the precursor of the membrane-bound form of M13 coat protein. There are 40 000 copies of M13 procoat protein/cell during M13 amber 7 virus infection. Purified procoat is quantitatively cleaved by isolated leader peptidase to yield mature-length coat protein. Rabbit antibodies to M13 procoat will precipitate procoat but not coat, suggesting that the antibody molecules are specifically recognizing the leader sequence or the conformation which it induces in the whole procoat molecule.     

Indecisive M13 procoat protein mutants bind to SecA but do not activate the translocation ATPase

The M13 procoat protein serves as the paradigm for the Sec-independent membrane insertion pathway. This protein is inserted into the inner membrane of Escherichia coli with two hydrophobic regions and a central periplasmic loop region of 20 amino acid residues. Extension of the periplasmic loop region renders M13 procoat membrane insertion Sec-dependent. Loop regions with 118 or more residues required SecA and SecYEG and were efficiently translocated in vivo. Two mutants having loop regions of 80 and 100 residues, respectively, interacted with SecA but failed to activate the membrane translocation ATPase of SecA in vitro. Similarly, a procoat mutant with two additional glutamyl residues in the loop region showed binding to SecA but did not stimulate the ATPase. The three mutants were also defective for precursor-stimulated binding of SecA to the membrane surface. Remarkably, the mutant proteins act as competitive inhibitors of the Sec translocase. This suggests that the region to be translocated is sensed by SecA but the activation of the SecA translocation ATPase is only successful for substrates with a minimum length of the translocated region.     

M13 procoat inserts into liposomes in the absence of other membrane proteins

Procoat, the precursor form of the major coat protein of coliphage M13, assembles into the Escherichia coli inner membrane and is cleaved to mature coat protein by leader peptidase. This assembly process has previously been reconstituted using lipids and purified leader peptidase in a cell-free protein synthesis reaction (Watts, C., Silver, P., and Wickner, W. (1981) Cell 25, 347-353; Ohno-Iwashita, Y., and Wickner, W. (1983) J. Biol. Chem. 258, 1895-1900). We now report that procoat can also cross a liposomal membrane composed of only purified phospholipids; leader peptidase is not needed to catalyze insertion. When procoat is synthesized in vitro in the presence of liposomes with encapsulated chymotrypsin, the procoat inserts spontaneously through the membrane and is degraded. The protease was shown by several criteria to be in the lumen of the liposomes. These results demonstrate that the precursor form of an E. coli integral membrane protein can cross a membrane without the aid of leader peptidase or any other membrane proteins.     

Polyoma large T antigen regulates the integration of viral DNA sequences into the genome of transformed cells

The major coat protein of coliphage M13 is an integral protein of the E. coli plasma membrane prior to its assembly into new virus particles. It is generated from its precursor, procoat, by a membrane-bound leader peptidase. We now describe the reconstitution of a highly purified preparation of this enzyme into vesicles of E. coli phospholipids. These vesicles bind procoat made in vitro and procoat isolated from in vitro synthesis. Both the crude and the purified substrates were converted posttranslationally to coat protein. A significant proportion of the coat protein becomes inserted into the vesicle bilayer, with the N terminus facing the vesicle interior and the C terminus exposed to the external medium. These results strongly suggest that highly purified leader peptidase from E. coli and phospholipids are the only components necessary to mediate the binding, processing and insertion of this integral membrane protein.     

M13 procoat protein insertion into YidC and SecYEG proteoliposomes and liposomes

M13 procoat protein was one of the first model proteins used to study bacterial membrane protein insertion. It contains a signal peptide of 23 amino acid residues and is not membrane targeted by the signal recognition particle. The translocation of its periplasmic domain is independent of the preprotein translocase (SecAYEG) but requires electrochemical membrane potential and the membrane insertase YidC of Escherichia coli. We show here that YidC is sufficient for efficient membrane insertion of the purified M13 procoat protein into energized YidC proteoliposomes. When no membrane potential is applied, the insertion is substantially reduced. Only in the presence of YidC, membrane insertion occurs if bilayer integrity is preserved and membrane potential is stable for more than 20 min. A mutant of the M13 procoat protein, H5EE, with two additional negatively charged residues in the periplasmic domain inserted into YidC proteoliposomes and SecYEG proteoliposomes with equal efficiencies. We conclude that the protein can use both the YidC-only pathway and the Sec pathway. This poses the questions of how procoat H5EE is inserted in vivo and how insertion pathways are selected in the cell.     

Membrane assembly from purified components. I. Isolated M13 procoat does not require ribosomes or soluble proteins for processing by membranes

The coat protein of coliphage M13 is an integral protein of the host-cell cytoplasmic membrane prior to its assembly into virions. It is initially synthesized as procoat, a soluble precursor with a 23 amino acid leader sequence at its amino terminus. ³⁵S-labeled procoat accumulates during an in vitro translation reaction that contains ³⁵S-methionine and RNA from M13-infected cells. Radiochemically pure procoat has been isolated from in vitro translation reactions by extraction into an organic solvent and gel filtration through Sephadex LH-60. Radiochemically pure procoat can be used as substrate in rapid and quantitative assays for leader peptidase and for leader peptide hydrolase, an enzyme that degrades the leader peptide after its release from procoat. Procoat solubility, digestion by leader peptidase and processing by membranes are affected by the presence of Mg²⁺ ion. Isolated procoat is soluble in water at low ionic strength and mildly alkaline pH as well as in detergent solutions. It is cleaved to coat protein by purified E. coli leader peptidase and by inverted E. coli inner-membrane vesicles. These properties of the purified procoat mirror those of the procoat in crude extracts. This suggests that there are no other soluble components that are necessary for the assembly of procoat into the membrane and its conversion to coat; specifically, it provides powerful evidence that protein synthesis is not involved.     

Isolation of cold-sensitive yidC mutants provides insights into the substrate profile of the YidC insertase and the importance of transmembrane 3 in YidC function

YidC, a 60-kDa integral membrane protein, plays an important role in membrane protein insertion in bacteria. YidC can function together with the SecYEG machinery or operate independently as a membrane protein insertase. In this paper, we describe two new yidC mutants that lead to a cold-sensitive phenotype in bacterial cell growth. Both alleles impart a cold-sensitive phenotype and result from point mutations localized to the third transmembrane (TM3) segment of YidC, indicating that this region is crucial for YidC function. We found that the yidC(C423R) mutant confers a weak phenotype on membrane protein insertion while a yidC(P431L) mutant leads to a stronger phenotype. In both cases, the affected substrates include the Pf3 coat protein and ATP synthase F₁F_o subunit c (F_oC), while CyoA (the quinol binding subunit of the cytochrome bo3 quinol oxidase complex) and wild-type procoat are slightly affected or not affected in either cold-sensitive mutant. To determine if the different substrates require various levels of YidC activity for membrane insertion, we performed studies where YidC was depleted using an arabinose-dependent expression system. We found that −3M-PC-Lep (a construct with three negatively charged residues inserted into the middle of the procoat-Lep [PC-Lep] protein) and Pf3 P2 (a construct with the Lep P2 domain added at the C terminus of Pf3 coat) required the highest amount of YidC and that CyoA-N-P2 (a construct with the amino-terminal part of CyoA fused to the Lep P2 soluble domain) and PC-Lep required the least, while F_oC required moderate YidC levels. Although the cold-sensitive mutations can preferentially affect one substrate over another, our results indicate that different substrates require different levels of YidC activity for membrane insertion. Finally, we obtained several intragenic suppressors that overcame the cold sensitivity of the C423R mutation. One pair of mutations suggests an interaction between TM2 and TM3 of YidC. The studies reveal the critical regions of the YidC protein and provide insight into the substrate profile of the YidC insertase.     

Efficient translocation of positively charged residues of M13 procoat protein across the membrane excludes electrophoresis as the primary force for membrane insertion.

The coat protein of bacteriophage M13 is inserted into the Escherichia coli plasma membrane as a precursor protein, termed procoat, with a typical leader peptide of 23 amino acid residues. Its membrane insertion requires the electrochemical potential but not the cellular components SecA and SecY. Since the electrochemical gradients result in the periplasmic side of the membrane being positively charged, the membrane potential could contribute to the transfer of the negatively charged central region of procoat across the membrane. Here we demonstrate that the central domain following the leader peptide can be translocated across the membrane even when the net charge of the region is changed from -3 to +3. This rules out an electrophoresis-like insertion mechanism for procoat. We also show that the sec independence of procoat insertion is linked to the presence of the second apolar domain. The deletion of most of the second apolar domain from a procoat fusion protein results in sec dependent membrane insertion of the hybrid protein. Moreover, like other proteins that require the sec genes, translocation of this sec dependent procoat protein is inhibited when positively charged residues are introduced after the leader peptide. Loop models involving one or two hydrophobic regions are presented that account for the differences in tolerance of positively charged residues.     

Chloroplast YidC homolog Albino3 can functionally complement the bacterial YidC depletion strain and promote membrane insertion of both bacterial and chloroplast thylakoid proteins

A new component of the bacterial translocation machinery, YidC, has been identified that specializes in the integration of membrane proteins. YidC is homologous to the mitochondrial Oxa1p and the chloroplast Alb3, which functions in a novel pathway for the insertion of membrane proteins from the mitochondrial matrix and chloroplast stroma, respectively. We find that Alb3 can functionally complement the Escherichia coli YidC depletion strain and promote the membrane insertion of the M13 procoat and leader peptidase that were previously shown to depend on the bacterial YidC for membrane translocation. In addition, the chloroplast Alb3 that is expressed in bacteria is essential for the insertion of chloroplast cpSecE protein into the bacterial inner membrane. Surprisingly, Alb3 is not required for the insertion of cpSecE into the thylakoid membrane. These results underscore the importance of Oxa1p homologs for membrane protein insertion in bacteria and demonstrate that the requirement for Oxa1p homologs is different in the bacterial and thylakoid membrane systems.