Chemiluminescence assay for kanamycin based on target recycling strategy

A chemiluminescence (CL) sensing strategy for kanamycin residue detection in fish samples was established based on luminol-functionalized gold nanoparticles as CL nanoprobe materials combined with DNA hairpin structure and carboxyl-modified magnetic beads. Relying on nucleic acid amplification technology, the system can successfully realize the recycling of kanamycin, so that the biosensor can release a large number of luminol-functionalized gold nanoparticles with excellent CL performance even at a low residual levels of kanamycin. The biosensor strategy showed a good linear relationship with kanamycin in the range 0.09–130 nM, the detection limit was as low as 0.04 nM. This method proves the excellent performance of the sensing strategy and provides a low-cost and high-sensitivity CL analysis strategy for the detection of kanamycin and even other antibiotics.     

Biosensor for the enantioselective analysis of S-perindopril

Because S-perindopril enantiomer is the eutomer which is responsible for the angiotensin-converting enzyme inhibition activity, it is necessary to develop a reliable method for its assay from its distomer, the R-enantiomer. For this purpose, an amperometric biosensor was developed based on L-amino acid oxidase. The working range of the described biosensor was 20pmol/L-10 micromol/L on the 7.0-7.4 pH range, with a detection limit of 2pmol/L. The low enantioselectivity for R-perindopril, as compared with S-enantiomer, was demonstrated by both mixed solutions and separate solutions methods (amperometric selectivity coefficient is 1.0 x 10(-4)). The biosensor was also selective towards D-proline and polyvinylpyrrolidone. The amperometric biosensor can be used for enantioselective analysis of S-perindopril in raw material, with an RSD < 1%. The life time (t95%) of the biosensor is three weeks.     

A novel chemiluminescence paper microfluidic biosensor based on enzymatic reaction for uric acid determination

In this work, chemiluminescence (CL) method was combined with microfluidic paper-based analytical device (μPAD) to establish a novel CL μPAD biosensor for the first time. This novel CL μPAD biosensor was based on enzyme reaction which produced H(2)O(2) while decomposing the substrate and the CL reaction between rhodanine derivative and generated H(2)O(2) in acid medium. Microchannels in μPAD were fabricated by cutting method. And the possible CL assay principle of this CL μPAD biosensor was explained. Rhodanine derivative system was used to reach the purpose of high sensitivity and well-defined signal for this CL μPAD biosensor. And the optimum reaction conditions were investigated. The quantitative determination of uric acid could be achieved by this CL μPAD biosensor with accurate and satisfactory result. And this biosensor could provide good reproducible results upon storage at 4°C for at least 10 weeks. The successful integration of μPAD and CL reaction made the final biosensor inexpensive, easy-to-use, low-volume, and portable for uric acid determination, which also greatly reduces the cost and increases the efficiency required for an analysis. We believe this simple, practical CL μPAD biosensor will be of interest for use in areas such as disease diagnosis.     

Plant tissue-based chemiluminescence flow biosensor for determination of unbound dopamine in rabbit blood with on-line microdialysis sampling

A novel plant tissue-based chemiluminescence (CL) biosensor for dopamine combined with flow injection analysis is presented in this paper. The potato roots act as molecular recognition elements. Dopamine is oxidized by oxygen under the catalysis of polyphenol oxidase in the tissue column to produce hydrogen peroxide, which can react with luminol in the presence of peroxidase of potato tissue to generate CL signal. The CL emission intensity was linear with dopamine concentration in the range of 1x10(-5)-1x10(-7) g/ml and the detection limit was 5.3x10(-8) g/ml (3sigma) with a relative standard deviation of 1.7%. Combined with microdialysis sampling, the biosensor was applied to monitor the variation of dopamine level in the blood of rabbit after the administration of dopamine to demonstrate the favorable resolution and reliability of the system for in vivo on-line monitoring.     

High-rate continuous production of lactic acid by Lactobacillus rhamnosus in a two-stage membrane cell-recycle bioreactor

It is important to produce L(+)-lactic acid at the lowest cost possible for lactic acid to become a candidate monomer material for promising biodegradable polylactic acid. In an effort to develop a high-rate bioreactor that provides high productivity along with a high concentration of lactic acid, the performance of membrane cell-recycle bioreactor (MCRB) was investigated via experimental studies and simulation optimization. Due to greatly increased cell density, high lactic acid productivity, 21.6 g L(-1) h(-1), was obtained in the reactor. The lactic acid concentration, however, could not be increased higher than 83 g/L. When an additional continuous stirred tank reactor (CSTR) was attached next to the MCRB a higher lactic acid concentration of 87 g/L was produced at significant productivity expense. When the two MCRBs were connected in series, 92 g/L lactic acid could be produced with a productivity of 57 g L(-1) h(-1), the highest productivity among the reports of L(+)-lactic acid that obtained lactic acid concentration higher than 85 g/L using glucose substrate. Additionally, the investigation of lactic acid fermentation kinetics resulted in a successful model that represents the characteristics of lactic acid fermentation by Lactobacillus rhamnosus. The model was found to be applicable to most of the existing data with MCRBs and was in good agreement with Levenspiel's product-inhibition model, and the Luedeking-Piret equation for product-formation kinetics appeared to be effective in representing the fermentation kinetics. There was a distinctive difference in the production potential of cells (cell-density-related parameter in Luedeking-Piret equation) as lactic acid concentration increases over 55 g/L, and this finding led to a more precise estimation of bioreactor performance.     

Synthesis and in vitro and in vivo evaluation of [11C]methyl-BIII277CL for imaging the PCP-binding site of the NMDA receptor by pet

A new benzomorphane derivative, [11C]methyl-BIII277CL, was evaluated as a potential radiotracer for visualizing the PCP-binding site of the N-methyl-D-aspartate (NMDA) receptor by positron emission tomography (PET). Methyl-BIII277CL was prepared by reacting the desmethyl compound (BIII277CL) with dimethylsulfate. The pharmacological profile of methyl-BIII277CL was determined by in vitro receptor-screening assays. At a concentration of 100 nM, methyl-BIII277CL showed a significant interaction with the PCP-binding site of the NMDA receptor (79% inhibition of specific binding) and the sigma-binding site (46% inhibition). In displacement assays using mice cortical membranes, methyl-BIII277CL displayed a high affinity at the PCP-binding site of the NMDA receptor (Ki = 49 +/- 14 nmol/L) and a 130-fold lower interaction with the sigma1-binding site (Ki = 6.35 +/- 0.26 micromol/L). For saturation experiments and in vivo studies, methyl-BIII277CL was radiolabeled with 11C at the O-position of the desmethyl precursor (BIII277CL) using [11C]methyliodide with a specific activity of 35-70 GBq/micromol at the end of synthesis (EOS). In saturation assays using rat whole brain membranes [11C]methyl-BIII277CL showed a Kd of 6 +/- 1 nmol/L and a Bmax of 670 +/- 154 fmol/mg protein. Biodistribution and PET studies in rats and pigs, however, indicated a lack of specific binding and unfavorable pharmacokinetics. Kinetic modeling using the 1-tissue compartment model demonstrated for [11C]methyl-BIII277CL a low distribution volume (Dv = 0.98 mL/mL(tissue)) and very high values for the kinetic parameters K1 and k2 (K1 = 0.36 mL/mL(tissue)/min and k2 = 0.37min(-1)) in pig cortex. [11C]methyl-BIII277CL, due to the lack of specificity in vivo, may not be a candidate for imaging the PCP-binding site of the NMDA receptor.     

Development of a detection system for histidine decarboxylating lactic acid bacteria based on DNA probes, PCR and activity test

On the basis of the comparison of the nucleotide sequences of the histidine decarboxylase genes ( hdc A) of Lactobacillus 30A and Clostridium perfringens and the amino acid sequences of these histidine decarboxylases and those of Lactobacillus buchneri and Micrococcus , oligonucleotides unique to the hdc A genes were synthesized and used in PCR. All histidine-decarboxylating lactic acid bacteria gave a signal with primer set JV16HC/JV17HC in PCR. In addition to this primer set, CL1/CL2 and CL1/JV17HC were also useful for the detection of histamine-forming Leuconostoc œnos strains in PCR. The 150 base pair amplification product of the decarboxylating Leuc. œnos strain generated with primer set CL1/CL2 was sequenced. Alignment studies showed a high degree of relatedness among the hdc A gene products of Gram-positive bacteria.
The amplification products of the hdc A genes from Lact. buchneri and Leuc. œnos were used to serve as a DNA probe in hybridization studies. All histidine-decarboxylating lactic acid bacteria gave a hybridization signal with the DNA probes. In hybridization only one false-positive signal with a Lactobacillus lindneri strain was observed, which was anticipated to contain a truncated hdc A gene.
In addition to these DNA probe tests, a simple and reliable activity test is presented, which can be used during starter selection to test strains for histidine decarboxylase activity.     

Chemiluminescence flow biosensor for glucose based on gold nanoparticle-enhanced activities of glucose oxidase and horseradish peroxidase

In this work, a novel chemiluminescence (CL) flow biosensor for glucose was proposed. Glucose oxidase (GOD), horseradish peroxidase (HRP) and gold nanoparticles were immobilized with sol-gel method on the inside surface of the CL flow cell. The CL detection involved enzymatic oxidation of glucose to d-gluconic acid and H(2)O(2), and then the generated H(2)O(2) oxidizing luminol to produce CL emission in the presence of HRP. It was found that gold nanoparticles could remarkably enhance the CL respond of the glucose biosensor. The enhanced effect was closely related to the sizes of gold colloids, and the smaller the size of gold colloids had the higher CL respond. The immobilization condition and the CL condition were studied in detail. The CL emission intensity was linear with glucose concentration in the range of 1.0 x 10(-5)molL(-1) to 1.0 x 10(-3)molL(-1), and the detection limit was 5 x 10(-6)molL(-1) (3sigma). The apparent Michaelis-Menten constant of GOD in gold nanoparticles/sol-gel matrix was evaluated to be 0.3mmolL(-1), which was smaller than that of GOD immobilized in sol-gel matrix without gold nanoparticles. The proposed biosensor exhibited short response time, easy operation, low cost and simple assembly, and the proposed biosensor was successfully applied to the determination of glucose in human serum.     

Utilization of by-products derived from bioethanol production process for cost-effective production of lactic acid

The by-products of bioethanol production such as thin stillage (TS) and condensed distillers solubles (CDS) were used as a potential nitrogen source for economical production of lactic acid. The effect of those by-products and their concentrations on lactic acid fermentation were investigated using Lactobacillus paracasei CHB2121. Approximately, 6.7 g/L of yeast extract at a carbon source to nitrogen source ratio of 15 was required to produce 90 g/L of lactic acid in the medium containing 100 g/L of glucose. Batch fermentation of TS medium resulted in 90 g/L of lactic acid after 48 h, and the medium containing 10 % CDS resulted in 95 g/L of lactic acid after 44 h. Therefore, TS and CDS could be considered as potential alternative fermentation medium for the economical production of lactic acid. Furthermore, lactic acid fermentation was performed using only cassava and CDS for commercial production of lactic acid. The volumetric productivity of lactic acid [2.94 g/(L·h)] was 37 % higher than the productivity obtained from the medium with glucose and CDS.     

利用微生物缓解苯丙烯酸对黄瓜生长的抑制

黄瓜根系分泌的酚酸类物质特别是苯丙烯酸,它是引起黄瓜自毒作用的一种重要的化感物质,对黄瓜连作具有明显的抑制作用。从珠海市污水排放入海口处分离出一株放线菌CellulosimicrobiumcellusansHa8菌株,它具有分解苯丙烯酸、苯甲酸、对氨基苯甲酸和苯酚的能力。通过在水培溶液和盆栽土壤中添加外源苯丙烯酸模拟连作环境,研究菌株Ha8对连作障碍的缓解程度。水培实验证明施用107cfu/L菌株Ha8能够有效缓解苯丙烯酸(浓度分别为2μmol/L和10μmol/L)对水培黄瓜的抑制作用,表现为显著促进黄瓜茎和根系的生长,提高开花数、产量等。土培实验证明,Ha8(≥106cfu/g干有机肥)和有机肥(3mg/kg土壤)联合施用,能够有效缓解苯丙烯酸(100mg/kg土壤)对黄瓜生长的抑制作用,主要表现为促进黄瓜对营养的吸收、提高黄瓜的根系脱氢酶活力、促进黄瓜根系微生物活性、增加有益菌群等。     

高糖和氮源对鼠李糖乳杆菌(Lactobacillus rhamnosus)L-乳酸发酵的影响

鼠李糖乳杆菌经实验室耐高糖高酸选育,能够在高糖浓度下高效高产L-乳酸。以酵母粉为氮源和生长因子,葡萄糖初始浓度分别为120 g/L和146 g/L,摇瓶培养120h,L-乳酸产量分别为104g/L和117.5g/L,L-乳酸得率分别为86.7%和80.5%。高葡萄糖浓度对菌的生长和乳酸发酵有一定的抑制。增加接种量,在高糖浓度发酵条件下,可以缩短发酵时间,但对增加乳酸产量效果不明显。乳酸浓度对鼠李糖乳杆菌生长和产酸有显著的影响。初始乳酸浓度到达70g/L以上时,鼠李糖乳杆菌基本不生长和产酸,葡萄糖消耗也被抑制。酵母粉是鼠李糖乳杆菌的优良氮源,使用其它被测试的氮源菌体生长和产酸都有一定程度的下降。用廉价的黄豆粉并补充微量维生素液,替代培养基中的酵母粉,可以使产酸浓度和碳源得率得以基本维持。     

糖、GA3及ABA对印度娃儿藤(Tylophora indica(Burm.f.)Merrill)体细胞胚发生的影响

从印度娃儿藤节间外植体获取愈伤组织,分析了糖、赤霉素(GA3)及脱落酸(ABA)对愈伤组织形成体细胞的影响。实验证明,含4μmol/L2,4-二氯苯氧乙酸(2,4-D)的MS培养基是获得具有成胚功能的愈伤组织的最佳培养基。在含有6μmol/L激动素(Kn)的MS培养基上,高达69%的愈伤组织分化为体细胞胚,平均单位外植体(每克愈伤组织)产胚25个。在6μmol/LKn存在的条件下,分析了蔗糖、葡糖糖对胚产生的影响,不同的糖及不同糖浓度对体细胞胚的发生影响很大。6μmol/L Kn与200mmol/L蔗糖处理胚胎发生率最大(71%),单位外植体生成49个胚。然而葡萄糖与Kn、或者葡糖糖、蔗糖与Kn三者加在一起则降低成胚率及产胚数。一定浓度的GA3和ABA能促进体细胞胚的产生。在含200mmol/L蔗糖的培养基中加10μmol/LGA3胚的生成率为98%,单位外植体产胚51个。在含200mmol/L蔗糖的培养基中加2μmol/L ABA能显著增加体细胞胚的量,该培养基上每外植体平均生成44个胚,产率为95%。本研究显示,含200mmol/L蔗糖的培养基中分别加入6μmol/L Kn、10μmol/L GA3或者2μmol/L ABA能显著提高印度娃儿藤体细胞胚发生率,而单独的葡萄糖或葡糖糖和蔗糖则有抑制作用。得到的胚均能正常发育并分化为植株。     

Monitoring glutamine in animal cell cultures using a chemiluminescence fiber optic biosensor

Together with flow injection analysis (FIA), a chemiluminescence (CL) fiber optic biosensor system has been developed for determining glutamine in animal cell cultures. Glutaminase (GAH) and glutamate oxidase (GLO) were onto separate porous aminopropyl glass beads via glutaraldehyde activation and packed to form an enzyme column. These two enzymes acted in sequence on glutamine to produce hydrogen peroxide, which was then reacted with luminol in the presence of ferricyanide to produce a light signal. An anion exchanger was introduced on-line to eliminate interfering endogenous glutamate in view of its negative charge at pH above 3.22 (isoelectric pH). Among several resins tested, the acetate form was most effective, and this type of ion exchanger also effectively adsorbed uric acid, acetaminophen, and aspartic acid.There was an excellent linear relationship between the CL response and standard glutamine concentration in the range 1 to 100 muM. A complete analysis could be performed in 2 min, including sampling and washing with a good reproducibility (+/- 4.4%). Both the bi-enzymic and ion exchange columns were useful for at least 500 analyses when the biosensor system was applied for the glutamine determination in murine hybridoma cell cultures and insect cell cultures. The values obtained compared well with those of HPLC, thus validating the applicability of the CL fiber optic system. (c) 1993 John Wiley & Sons, Inc.     

固定化米根霉发酵制L-乳酸

采用海藻酸钙包埋法固定化米根霉（Ｒｈｉｚｏｐｕｓｏｒｙｚａｅ）,菌体在颗粒表面形成一层菌丝膜,有利于氧气和其它营养物质的传递;三相流化床生物反应器结构简单、动力消耗低、反应器内物质混合均匀、氧传递量大于固定化米根霉的需氧量,非常适合好氧的固定化米根霉发酵。利用它进行重复使用固定化米根霉的间歇发酵或连续发酵制备Ｌ 乳酸,整个过程一般可持续两周以上。固定化米根霉的产酸速率达１６～１８ｇ／Ｌ ｂｅａｄ．ｈｒ,得率为７０～８０％,反应器生产能力约为传统搅拌罐的３倍。采用海藻酸钙包埋法固定化米根霉在三相流化床生物反应器中进行发酵可以有效地提高Ｌ 乳酸的生产效率,具有良好的工业应用前景。     

Simultaneous saccharification and fermentation of cellulose for lactic acid production

Lactic acid production from α-cellulose by simultaneous saccharification and fermentation (SSF) was studied. The cellulose was converted in a batch SSF using cellulase enzyme Cytolase CL to produce glucose sugar andLactobacillus delbrueckii to ferment the glucose to lactic acid. The effects of temperature, pH, yeast extract loading, and lactic acid inhibition were studied to determine the optimum conditions for the batch processing. Cellulose was converted efficiently to lactic acid, and enzymatic hydrolysis was the rate controlling step in the SSF. The highest conversion rate was obtained at 46°C and pH 5.0. The observed yield of lactic acid from α-cellulose was 0.90 at 72 hours. The optimum pH of the SSF was coincident with that of enzymatic hydrolysis. The optimum temperature of the SSF was chosen as the highest temperature the microorganism could withstand. The optimum yeast extract loading was found to be 2.5 g/L. Lactic acid was observed to be inhibitory to the microorganisms’ activity.     

Development of a disposable pyruvate biosensor to determine pungency in onions (Allium cepa L.)

A disposable prototype pyruvate biosensor was constructed using pyruvate oxidase immobilised on mediated meldolas blue electrodes to determine pungency in onions (Allium cepa L.). The optimum operating potential was +150 mV (versus Ag/AgCl). A strong correlation between the biosensor response and untreated onion juice of known pyruvate concentration 2-12 micromol/g fresh weight (FW) was demonstrated. The biosensor was able to differentiate between low and high pungency onions. The detection limit using 1 unit of pyruvate oxidase was 1-2 micromol/g FW. Optimum concentrations of co-factors TPP, FAD and MgSO4 comprising the enzyme cocktail were determined as being 0.04, 0.1 and 30 mM, respectively.     

Determination of serum glucose by horseradish peroxidase-catalysed imidazole chemiluminescence coupled to a micro-flow-injection system.

The reactivity of flow-injection (FI)-horseradish peroxidase (HRP)-catalysed imidazole chemiluminescence (CL) was studied for continuous determination of hydrogen peroxide (H(2)O(2)) and serum glucose with immobilized glucose oxidase. Light emission by the HRP-catalysed imidazole CL was obtained when immobilized HRP, alkaline imidazole (in Tricine solution, pH 9.3) and H(2)O(2) were reacted at room temperature. The optimal pH for the CL reaction was 9.3 and the optimal concentration of imidazole was 100 micromol/L. When no imidazole was added, the light intensity of the same H(2)O(2) specimen decreased to a level that could not be quantitatively determined. The spectrum of the light emitted by imidazole CL was in the range 400-600 nm with a peak at 500 nm. The calibration equation for determination of H(2)O(2) was y = 9860x(2) + 3830x + 11,700, where y = light intensity (RLU) and x = concentration of H(2)O(2) (micromol/L). The detection limit of H(2)O(2) was 5 pmol, and the reproducibility of the H(2)O(2) assay was 2.3% of the coefficient of variation (H(2)O(2) 48 micromol/L, n = 13). The CL method was successfully applied to assay glucose after on-line generation of H(2)O(2) with the immobilized glucose oxidase column, resulting in good reproducibility (CV = 3.3% and 1.0% for the standard glucose and the control serum, respectively).     

豚鼠耳蜗中ATP对一氧化氮/环磷酸鸟苷途径的激活作用

实验研究了豚鼠耳蜗中ATP和一氧化氮／环磷酸鸟苷途径(nitric oxide／cyclic guanosine monophosphate,NO／cGMP pathway)的关系。将40只耳廓反射灵敏的健康白色豚鼠随机分为5组,分别对其离体的耳蜗即刻灌流人工外淋巴基础液(artificial perilymph basic solution,APBS)以及溶于人工外淋巴基础液的ATP、一氧化氮合酶抑制剂左旋-N^G-硝基精氨酸(L-N^G-nitroarginine,L-NNA) ATP、可溶性鸟苷酸环化酶抑制剂1H-[1,2,4]草酸重氮[4,3-a]喹恶啉(1H-[1,2,4]oxadiazolo[4,3-a]quinoxalin-1-one,ODQ) ATP和A-23187(Ca^2 载体),收集耳蜗组织标本,利用放射免疫方法测定耳蜗组织中的cGMP的平均含量,比较各组之间耳蜗组织cGMF平均含量的差异。试验结果显示,向刚离体的耳蜗中灌流ATP和A-23187可以引起耳蜗组织中的cGMP含量升高,而灌流L-NNA和ODQ则可以抑制ATP所引起的耳蜗组织中cGMP含量的升高,提示在耳蜗组织中ATP可以通过升高细胞内Ca^2 浓度的作用而激活NO／cGMF途径。从本实验结果可以提出假说：耳蜗中ATP从神经末梢释放,通过提高细胞内Ca^2 的浓度,有激活NO／cGMP途径的作用,而NO／cGMP又能对ATP进行负反馈调节,两者共同调节耳蜗的生理功能,在耳蜗中存在ATP／Ca^2 -NO／cGMP通路。     

Production of succinic acid and lactic acid by Corynebacterium crenatum under anaerobic conditions

A new succinic acid and lactic acid production bioprocess by Corynebacterium crenatum was investigated in mineral medium under anaerobic conditions. Corynebacterium crenatum cells with sustained acid production ability and high acid volumetric productivity harvested from the glutamic acid fermentation broth were used to produce succinic acid and lactic acid. Compared with the first cycle, succinic acid production in the third cycle increased 120% and reached 43.4 g/L in 10 h during cell-recycling repeated fermentations. The volumetric productivities of succinic acid and lactic acid could maintain above 4.2 g/(L·h) and 3.1 g/(L·h), respectively, for at least 100 h. Moreover, wheat bran hydrolysates could be used for succinic acid and lactic acid production by the recycled C. crenatum cells. The final succinic acid concentration reached 43.6 g/L with a volumetric productivity of 4.36 g/(L·h); at the same time, 32 g/L lactic acid was produced.     

Strain improvement and metabolic flux analysis in the wild-type and a mutant Lactobacillus lactis strain for L(+)-lactic acid production

The effects of initial glucose concentration and calcium lactate concentration on the lactic acid production by the parent strain, Lactobacillus lactis BME5-18, were studied. The results of the experiments indicated that glucose and lactate repressed the cell growth and the lactic acid production by Lactobacillus lactis BME5-18. A L(+)-lactic acid overproducing strain, Lactobacillus lactis BME5-18M, was screened by mutagenizing the parent strain with ultraviolet (UV) light irradiation and selecting the high glucose and lactate calcium concentration repression resistant mutant. Starting with a concentration of 100g L(-1) glucose, the mutant produced 98.6 g L(-1) lactic acid after 60 h in flasks, 73.9% higher than that of the parent strain. The L(+)-lactic acid purity was 98.1% by weight based on the amount of total lactic acid. The culture of the parent strain could not be analyzed well by conventional metabolic flux analysis techniques, since some pyruvate were accumulated intracellularly. Therefore, a revised flux analysis method was proposed by introducing intracellular pyruvate pool. Further studies demonstrate that there is a high level of NADH oxidase activity (12.11 mmol mg(-1) min(-1)) in the parent strain. The molecular mechanisms of the strain improvement were proposed, i.e., the high level of NADH oxidase activity was eliminated and the uptake rate of glucose was increased from 82.1 C-mmol (g DW h)(-1) to 98.9 C-mmol (g DW h)(-1) by mutagenizing the parent strain with UV, and therefore the mutant strain converts mostly pyruvate to lactic acid with a higher productivity (1.76 g L(-1) h(-1)) than the parent strain (0.95 g L(-1) h(-1)).