Conformation of (2→1)-β-d-fructan in aqueous solution

The conformation and dilute solution properties of (2→1)-β-d-fructan in aqueous solution were studied by gel permeation chromatography, low-angle laser light-scattering photometry, viscometry, small-angle X-ray scattering and electron microscopy. Fractions covering a broad range of weight-average molecular weights (M_w) from 1.49 × 10⁴ to 5.29 × 10⁶ were obtained from a native sample by ultrasonic degradation and fractional precipitation. For M_w < 4 × 10⁴, the intrinsic viscosity [η] varies with M_w^0.71, indicating that the fructan chain behaves as a random coil expanded by an excluded-volume effect in this molecular weight region. For M_w > 10⁵, [η] exhibits an unusually weak dependence on M_w and finally becomes almost independent of molecular weight. This behaviour is interpreted in terms of a globular conformation of the high-molecular-weight fructan molecules. Small-angle X-ray-scattering measurements and electron microscopic observations support this interpretation of the values of [η] observed.     

Laccase-catalyzed oxidation of phenolic compounds in organic media

Rhus vernificera laccase-catalyzed oxidation of phenolic compounds, i.e., (+)-catechin, (−)-epicatechin and catechol, was carried out in selected organic solvents to search for the favorable reaction medium. The investigation on reaction parameters showed that optimal laccase activity was obtained in hexane at 30 °C, pH 7.75 for the oxidation of (+)-catechin as well as for (−)-epicatechin, and in toluene at 35 °C, pH 7.25 for the oxidation of catechol. E_a and Q₁₀ values of the biocatalysis in the reaction media of the larger log p solvents like isooctane and hexane were relatively higher than those in the reaction media of lower log p solvents like toluene and dichloromethane. Maximum laccase activity in the organic media was found with 6.5% of buffer as co-solvent. A wider range of 0–28 μg protein/ml in hexane than that of 0–16.7 μg protein/ml in aqueous medium was observed for the linear increasing conversion of (+)-catechin. The kinetic studies revealed that in the presence of isooctane, hexane, toluene and dichloromethane, the K_m values were 0.77, 0.97, 0.53 and 2.9 mmol/L for the substrate of (+)-catechin; 0.43, 0.34, 0.14 and 3.4 mmol/L for (−)-epicatechin; 2.9, 1.8, 0.61 and 1.1 mmol/L for catechol, respectively, while the corresponding V_max values were 2.1 × 10⁻², 2.3 × 10⁻², 0.65 × 10⁻² and 0.71 × 10⁻² δA/μg protein min); 1.8 × 10⁻², 0.88 × 10⁻², 0.19 × 10⁻² and 1.0 × 10⁻² δA/μg protein min); 0.48 × 10⁻², 0.59 × 10⁻², 0.67 × 10⁻² and 0.54 × 10⁻² δA/μg protein min), respectively. FT-IR indicated the formation of probable dimer from (+)-catechin in organic solvent. These results suggest that this laccase has higher catalytic oxidation capacity of phenolic compounds in suitable organic media and favorite oligomers could be obtained.     

Kinetic analyses for bindings of concanavalin A to dispersed and condensed mannose surfaces on a quartz crystal microbalance

A biotinylated mannotriose (Man3-bio) was dispersively immobilized in the matrix of biotinylated lactose (Gal-Glc-bio) on a streptavidin-covered, 27-MHz quartz crystal microbalance (QCM), and binding kinetics of concanavalin A (Con A) to Man3-bio in the Gal-Glc-bio matrix could be obtained from frequency decreases (mass increases) of the QCM. Association constants (K_a) and binding and dissociation rate constants (k_on and k_off) could be determined separately as the 1:1 and 1:2 bindings of Con A to Man3-bio on the surface. When Man3-bio was immobilized with content of 1 to 5 mol% in the matrix, the 1:1 binding of Con A to Man3-bio was obtained as K_a = (4 ± 1) × 10⁶ M⁻¹, k_on = (4 ± 1) × 10⁴ M⁻¹ s⁻¹, and k_off = (12 ± 2) × 10^–3 s⁻¹. On the contrary, when Man3-bio was immobilized with content of 20 to 100 mol% in the matrix, the 1:2 binding of Con A to Man3-bio was obtained as K_a = (14 ± 2) × 10⁶ M⁻¹, k_on = (14 ± 2) × 10⁴ M⁻¹ s⁻¹, and k_off = (7 ± 2) × 10^–3 s⁻¹. Thus, K_a for the 1:2 binding was 10 times larger than that for the 1:1 binding, with a three times larger binding rate constant (k_on) and a three times smaller dissociation rate constant (k_off). This is the first example to obtain separate kinetic parameters for the 1:1 and 1:2 bindings of lectins to carbohydrates on the surface.     

Rapid method to determine the molecular weight of dextrins and dextrans

A rapid method was developed to determine the molecular weight (M_n) of β-limit dextrin and dextrans (Leuconostoc mesenteroides) using a reducing power approach. The M_n of the β-limit dextrin was also estimated from high performance liquid chromatography (HPLC). Chromatograms were pre-calibrated with the dextrans. The three dextrins had a M_n of 2.09, 2.40 and 2.63 × 10⁵ using the reducing method and 4.80, 5.90 and 2.80 × 10⁵ by HPLC. The method could be employed to estimate M_n of dextrins where chromatographic systems were not available.     

Nitrogen utilization by the raphidophyte Heterosigma akashiwo: Growth and uptake kinetics in laboratory cultures

The nitrogen uptake and growth capabilities of the potentially harmful, raphidophycean flagellate Heterosigma akashiwo (Hada) Sournia were examined in unialgal batch cultures (strain CCMP 1912). Growth rates as a function of three nitrogen substrates (ammonium, nitrate and urea) were determined at saturating and sub-saturating photosynthetic photon flux densities (PPFDs). At saturating PPFD (110 μE m⁻² s⁻¹), the growth rate of H. akashiwo was slightly greater for cells grown on NH₄⁺ (0.89 d⁻¹) compared to cells grown on NO₃⁻ or urea, which had identical growth rates (0.82 d⁻¹). At sub-saturating PPFD (40 μE m⁻² s⁻¹), both urea- and NH₄⁺-grown cells grew faster than NO₃⁻-grown cells (0.61, 0.57 and 0.46 d⁻¹, respectively). The N uptake kinetic parameters were investigated using exponentially growing batch cultures of H. akashiwo and the ¹⁵N-tracer technique. Maximum specific uptake rates (V_max) for unialgal cultures grown at 15 °C and saturating PPFD (110 μE m⁻² s⁻¹) were 28.0, 18.0 and 2.89 × 10⁻³ h⁻¹ for NH₄⁺, NO₃⁻ and urea, respectively. The traditional measure of nutrient affinity—the half saturation constants (K_s) were similar for NH₄⁺ and NO₃⁻ (1.44 and 1.47 μg-at N L⁻¹), but substantially lower for urea (0.42 μg-at N L⁻¹). Whereas the α parameter (α = V_max/K_s), which is considered a more robust indicator for substrate affinity when substrate concentrations are low (<K_s), were 19.4, 12.2 and 6.88 × 10⁻³ h⁻¹/(μg-at N L⁻¹) for NH₄⁺, NO₃⁻ and urea, respectively. These laboratory results demonstrate that at both saturating and sub-saturating N concentrations, N uptake preference follows the order: NH₄⁺ > NO₃⁻ > urea, and suggests that natural blooms of H. akashiwo may be initiated or maintained by any of the three nitrogen substrates examined.     

Molecular mass and antitumor activities of sulfated derivatives of α-glucan from Poria cocos mycelia

Two kinds of water-insoluble (1 → 3)-α-d-glucan samples, ab-PCM3-I and ac-PCM3-I, isolated from different Poria cocos mycelia were sulfated, to produce two series of water-soluble derivatives ab-PCM3-I-S1–S5 and ac-PCM3-I-S1–S5, respectively. The derivatives having different weight-average molecular mass (M_w) were produced by changing reaction temperature and time as well as molar ratios between chlorosulfonic acid and number of hydroxyl groups in the glucan. The degrees of substitution (DS) of the sulfated derivatives were analyzed by elemental analysis (EA) to be 0.39–0.67 for ab-PCM3-I-S and 0.73–0.96 for ac-PCM3-I-S, respectively. The M_w and the intrinsic viscosity ([η]) of the samples ab-PCM3-I-S and the ac-PCM3-I-S were measured by size exclusion chromatography combined with laser light scattering (SEC–LLS) and viscometry in phosphate buffer solution (PBS) at 37 °C. The results indicated that their M_w ranged from 2.0 to 11.3 × 10⁴ for the samples ab-PCM3-I-S, and 4.7 to 40.0 × 10⁴ for the samples ac-PCM3-I-S. Moreover, the antitumor activities of the sulfated derivatives ab-PCM3-I-S and ac-PCM3-I-S against Sarcoma 180 tumor cell tested both in vitro and in vivo are significantly higher than those of the native α-d-glucans. Therefore, a moderate range of molecular mass from 2.0 × 10⁴ to 40.0 × 10⁴, relatively high chain stiffness and good water solubility of the sulfated derivatives are beneficial to the enhancement of their antitumor activities.     

In vitro cytogenetic effects of Andrographis paniculata (kalmegh) on arsenic

In vitro effects of arsenic in human peripheral lymphocytes (HPL) at three different doses – 3.6×10⁻⁴, 1.4×10⁻³ and 0.72×10⁻³ μM for 24 h before harvesting on sister chromatid exchanges (SCE), Cell cycle proliferative index/replicative index (CCPI/RI), %M₁, %M₂ and %M₃, population doubling time (PDT) and average generation time (AGT) were examined. Andrographis paniculata (commonly referred to as ‘kalmegh’) has been used for centuries in traditional Indian and Chinese herbal medicine as a safe, natural folk remedy for assorted health concerns. In the present study, kalmegh (0.01 μg/7 ml culture media) was used along with the highest dose of arsenic; the results showed that arsenic induced increase in these genotoxic endpoints were fairly diminished by kalmegh. In addition, mutagenic in vitro effect of ethyl methanesulphonate (EMS) was used as a positive control in this study. It is thus concluded from this study that Andrographis has a protective role in arsenic toxicity.     

The development and multiple uses of a standardised bioassay method to select hypocrealean fungi for biological control of aphids

A technically standardised bioassay method was designed, evaluated and used to assess virulence and host range of hypocrealean fungi against aphids. A track mounted sprayer was used to apply conidia because hand held versions of the same sprayer can be used for field applications, thereby allowing the outcome from laboratory experiments to predict activity in the field accurately. Eighteen fungal isolates were assessed in single concentration bioassays against the black bean aphid Aphis fabae Scopoli. Isolates comprised commercially available mycoinsecticides (based on Beauveria bassiana and Lecanicillium longisporum) and isolates of B. bassiana, Lecanicillium spp., Paecilomyces fumosoroseus and Metarhizium anisopliae. Aphid mortality was in excess of 80% for 15 isolates, and HRI 1.72 (L. longipsorum), Z11 (P. fumosoroseus), Mycotech strain GHA (B. bassiana) and ARSEF 2879 (B. bassiana) were studied further. Multiple concentration bioassays identified HRI 1.72 as the most virulent isolate against A. fabae with significantly smaller LC₅₀ and LT₅₀ values compared to other isolates. A precise LC₅₀ value (2.95 × 10² conidia ml⁻¹) was calculated for HRI 1.72 using a second multiple concentration assay with smaller concentrations of conidia. The four isolates were applied at a single concentration (1 × 10⁸ conidia ml⁻¹) against Myzus persicae, A. fabae, Acyrthosiphon pisum, Metopolophium dirhodum, Sitobion avenae and Rhopalosiphum padi. A ranking of aphid susceptibility was obtained, such that S. avenae > M. persicae, A. pisum, A. fabae > R. padi. Results indicate the importance of standardising bioassay methods to reduce bioassay variability without compromising the ability to use the bioassay to investigate fungus–host interactions under varying abiotic and biotic conditions.     

Quantification of hydrogen peroxide and glucose using 3-methyl-2-benzothiazolinonehydrazone hydrochloride with 10,11-dihydro-5H-benz(b,f)azepine as chromogenic probe

A sensitive, selective, and rapid enzymatic method is proposed for the quantification of hydrogen peroxide (H₂O₂) using 3-methyl-2-benzothiazolinonehydrazone hydrochloride (MBTH) and 10,11-dihydro-5H-benz(b,f)azepine (DBZ) as chromogenic cosubstrates catalyzed by horseradish peroxidase (HRP) enzyme. MBTH traps free radical released during oxidation of H₂O₂ by HRP and gets oxidized to electrophilic cation, which couples with DBZ to give an intense blue-colored product with maximum absorbance at 620 nm. The linear response for H₂O₂ is found between 5 × 10⁻⁶ and 45 × 10⁻⁶ mol L⁻¹ at pH 4.0 and a temperature of 25 °C. Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 0.415 × 10⁶ M⁻¹ min⁻¹ and 9.81 × 10⁻⁴ min⁻¹, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the cosubstrates were 163.2 min⁻¹ and 4.156 × 10⁶ L mol⁻¹ min⁻¹, respectively. This method can be incorporated into biochemical analysis where H₂O₂ undergoes catalytic oxidation by oxidase. Its applicability in the biological samples was tested for glucose quantification in human serum.     

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode

Novel Pt nanoclusters embedded polypyrrole nanowires (PPy-Pt) composite was electrosynthesized on a glassy carbon electrode, denoted as PPy-Pt/GCE. A glucose biosensor was further fabricated based on immobilization of glucose oxidase (GOD) in an electropolymerized non-conducting poly(o-aminophenol) (POAP) film that was deposited on the PPy-Pt/GCE. The morphologies of the PPy nanowires and PPy-Pt nanocomposite were characterized by field emission scanning electron microscope (FE-SEM). Effect of experimental conditions involving the cycle numbers for POAP deposition and Pt nanoclusters deposition, applied potential used in glucose determination, temperature and pH value of the detection solution were investigated for optimization. The biosensor exhibited an excellent current response to glucose over a wide linear range from 1.5 × 10⁻⁶ to 1.3 × 10⁻² M (r = 0.9982) with a detection limit of 4.5 × 10⁻⁷ M (s/n = 3). Based on the combination of permselectivity of the POAP and the PPy films, the sensor had good anti-interference ability to ascorbic acid (AA), uric acid (UA) and acetaminophen. The apparent Michaelis–Menten constant (K_m) and the maximum current density (I_m) were estimated to be 23.9 mM and 378 μA/cm², respectively. In addition, the biosensor had also good sensitivity, stability and reproducibility.     

Application of response-surface methodology to evaluate the optimum medium components for the enhanced production of lichenysin by Bacillus licheniformis R2

Biosurfactants have gained attention because they exhibit some advantages such as biodegradability, low toxicity, ecological acceptability and ability to be produced from renewable and cheaper substrates. They are widely used for environmental applications for bioremediation and also in biomedical field. However, the high cost of production is the limiting factor for widespread industrial applications. Thus, optimization of the growth medium for biosurfactant-lichenysin production by Bacillus licheniformis R2 was carried out using response-surface methodology. A preliminary screening phase based on a two-level fractional factorial design led to the identification of NH₄NO₃, glucose, Na₂HPO₄ and MnSO₄·4H₂O concentrations as the most significant variables affecting the fermentation process. The 2⁴ full-factorial central composite design was then applied to further optimize the biosurfactant production. The optimal levels of the aforementioned variables were (g/l): NH₄NO₃, 1.0; glucose, 34.0; KH₂PO₄, 6.0; Na₂HPO₄, 2.7; MgSO₄·7H₂O, 0.1; CaCl₂, 1.2 × 10⁻³; FeSO₄·7H₂O, 1.65 × 10⁻³; MnSO₄·4H₂O, 1.5 × 10⁻³ and Na–EDTA, 2.2 × 10⁻³. With the optimization procedure, the relative lichenysin yield expressed as the critical micelle dilution (CMD) was fourfold higher than that obtained in the non-optimized reference medium.     

Fatty acid transport and activation and the expression patterns of genes involved in fatty acid trafficking

These studies defined the expression patterns of genes involved in fatty acid transport, activation and trafficking using quantitative PCR (qPCR) and established the kinetic constants of fatty acid transport in an effort to define whether vectorial acylation represents a common mechanism in different cell types (3T3-L1 fibroblasts and adipocytes, Caco-2 and HepG2 cells and three endothelial cell lines (b-END3, HAEC, and HMEC)). As expected, fatty acid transport protein (FATP)1 and long-chain acyl CoA synthetase (Acsl)1 were the predominant isoforms expressed in adipocytes consistent with their roles in the transport and activation of exogenous fatty acids destined for storage in the form of triglycerides. In cells involved in fatty acid processing including Caco-2 (intestinal-like) and HepG2 (liver-like), FATP2 was the predominant isoform. The patterns of Acsl expression were distinct between these two cell types with Acsl3 and Acsl5 being predominant in Caco-2 cells and Acsl4 in HepG2 cells. In the endothelial lines, FATP1 and FATP4 were the most highly expressed isoforms; the expression patterns for the different Acsl isoforms were highly variable between the different endothelial cell lines. The transport of the fluorescent long-chain fatty acid C₁-BODIPY-C₁₂ in 3T3-L1 fibroblasts and 3T3-L1 adipocytes followed typical Michaelis–Menten kinetics; the apparent efficiency (k_cat/K_T) of this process increases over 2-fold (2.1 × 10⁶–4.5 × 10⁶ s⁻¹ M⁻¹) upon adipocyte differentiation. The V_max values for fatty acid transport in Caco-2 and HepG2 cells were essentially the same, yet the efficiency was 55% higher in Caco-2 cells (2.3 × 10⁶ s⁻¹ M⁻¹ versus 1.5 × 10⁶ s⁻¹ M⁻¹). The kinetic parameters for fatty acid transport in three endothelial cell types demonstrated they were the least efficient cell types for this process giving V_max values that were nearly 4-fold lower than those defined form 3T3-L1 adipocytes, Caco-2 cells and HepG2 cells. The same cells had reduced efficiency for fatty acid transport (ranging from 0.82 × 10⁶ s⁻¹ M⁻¹ to 1.35 × 10⁶ s⁻¹ M⁻¹).     

Interactions among the entomopathogenic fungus, Beauveria bassiana (Ascomycota: Hypocreales), the parasitoid, Aphidius matricariae (Hymenoptera: Braconidae), and its host, Myzus persicae (Homoptera: Aphididae)

The effect of the entomopathogenic fungus Beauveria bassiana on the biological characteristics and life table of Aphidius matricariae, a parasitoid of the green peach aphid, Myzus persicae, was studied under laboratory conditions. Aphids were first infected with twice the LC₉₅ of B. bassiana for third-instar M. persicae (2 × 10⁸ conidia/ml). Subsequently, at different intervals they were exposed to 1-day-old mated parasitoid females for 24 h. The number of mummies produced per female and the percentage emergence of the F1 generation differed significantly as a function of the time interval between application of the fungus and exposure to the parasitoid. The interference of B. bassiana on parasitoid development was also studied by first exposing the aphid hosts to the parasitoid for 24 h and subsequently applying B. bassiana. The number of mummies produced by a female A. matricariae varied from 11.8 to 24.8 and was significantly different when the aphids were first exposed to the parasitoids and then treated with B. bassiana 24, 48, 72, and 96 h after exposure. There were no significantly different effects of B. bassiana on net reproductive rate (R₀), mean generation time (T), intrinsic rate (r_m) and the finite rate of increase (λ) of A. matricariae as a result of development in hosts exposed to low or high conidial concentrations (1 × 10², 2 × 10⁸ conidia/ml). The parasitoids developed in infected hosts had lower r_m, λ, T and DT (doubling time) values compared with those that developed in uninfected hosts but no differences were observed in R₀ values. With proper timing, A. matricariae and B. bassiana can be used in combination in the successful biological control of M. persicae.     

Rheological properties of concentrated solutions of gellan in an ionic liquid

The rheological properties of solutions of gellan were examined at high concentrations where there is entanglement coupling between gellan chains. An ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) was used as a solvent. Concentrated solutions of gellan in BmimCl were obtained by using a hot-molding technique. The concentration of gellan was varied from 1.9 × 10² to 4.8 × 10² kg m⁻³. The measurement temperature ranged from 50 to 100 °C. The master curve of the angular frequency dispersion of the storage modulus for the gellan solutions showed a rubbery plateau at high angular frequency. The molecular weight between entanglements (M_e) for gellan was obtained from the plateau modulus. From the concentration dependence curve of M_e, M_e for gellan in the molten state was determined to be 2.3 × 10³.     

Selection of Beauveria bassiana isolates for control of the whiteflies Bemisia tabaci and Trialeurodes vaporariorum on the basis of their virulence, thermal requirements, and toxicogenic activity

As part of a 3-fold approach to select potential mycoinsecticides for whitefly control, we evaluated infectivity, thermal requirements, and toxicogenic activity of the entomopathogenic fungus Beauveria bassiana (Ascomycota: Clavicipitaceae) under laboratory conditions. Twenty-five native B. bassiana isolates and a commercially available mycoinsecticide (based on B. bassiana) were evaluated for virulence to fourth instar nymphs of sweetpotato whitefly, Bemisia tabaci, and greenhouse whitefly, Trialeurodes vaporariorum, at a concentration of 1 × 10⁷ conidia/ml. All isolates were pathogenic for both whitefly species, whereas mortality rates varied from 3 to 85%. A second series of bioassays was conducted on 10 selected isolates using four 10-fold concentrations ranging from 1 × 10⁵ to 1 × 10⁸ conidia/ml. Median lethal concentrations (LC₅₀) of the four most virulent isolates varied from 1.1 × 10⁵ to 6.2 × 10⁶ conidia/ml and average survival time (AST) of treated nymphs from 5.9 to 7.4 days. T. vaporariorum were significantly more susceptible to all B. bassiana isolates than B. tabaci. The thermal biology of the eight most virulent isolates to both whitefly species was investigated at six temperatures (10–35 °C). The colony radial growth rate was estimated from the slope of the linear regression of colony radius on time and data were then fitted to a modified generalized β function that accounted for 90.5–99.3% of the data variance. Optimum temperatures for extension rate ranged from 23.1 to 27.1 °C, whereas maximum temperatures for fungal growth varied from 31.8 to 36.6 °C. On the basis of their virulence and thermal requirements, three isolates showed promise as candidates for whitefly management in Mediterranean greenhouses. Whilst in vitro production of macromolecular compounds toxic to Galleria mellonella larvae was not a requisite for virulence, ASTs of larvae injected with Sephadex G-25 fractions from candidate isolates ranged from 1.4 to 3.7 days compared with 5–6 days for non-toxic G-25 fractions. In addition, proteinase K treatment significantly reduced their toxic activity suggesting that they were proteins and revealing the potential of these isolates to be further improved through biotechnology to kill the pest more quickly.     

Allelochemical interactions and short-term effects of the dinoflagellate Alexandrium on selected photoautotrophic and heterotrophic protists

The marine dinoflagellate genus Alexandrium (Halim) Balech contains members that produce highly potent phycotoxins (PSP toxins or spirolides) as well as lytic substances and other allelochemicals of unknown structure and ecological significance. One isolate each of six Alexandrium species (A. tamarense, A. ostenfeldii, A. lusitanicum, A. minutum, A. catenella, A. taylori), of the closely related gonyaulacoid dinoflagellate Fragilidium subglobosum, and of the peridinioid Scrippsiella trochoidea were tested in 24 h co-incubation experiments for their short-term deleterious effects on a diversity of marine protists. Both autotrophs (Rhodomonas salina, Dunaliella salina, Thalassiosira weissflogii) and heterotrophs (Oxyrrhis marina, Amphidinium crassum, Rimostrombidium caudatum) were included as target species. All donor isolates except S. trochoidea exhibited lytic effects on at least some target species. Lytic effects were observed with all Alexandrium species, for both whole cell samples and culture filtrate (<10 μm and <0.2 μm). Antibiotic treated cultures with drastically reduced bacterial numbers did not show any general reduction in lytic capacity, therefore direct involvement of extracellular bacteria in allelochemical production is unlikely. Values of EC₅₀, defined as the Alexandrium cell concentration causing lysis of 50% of target cells, differed by two orders of magnitude depending on the donor/target combination, from 3.1 × 10³ cells ml⁻¹ (A. minutum/O. marina) down to 0.02 × 10³ cells ml⁻¹ (A. catenella/D. salina). Within the array of nine donor Alexandrium/target combinations, variable ratios in EC₅₀ values between donor/target combination cannot be explained by quantitative differences in allelochemical production, but rather indicate qualitative differences in the composition of compounds produced by different Alexandrium strains. In conclusion, our study confirms the widespread lytic capacity within the genus Alexandrium, although allelochemical effects are not restricted to this genus. Allelochemical interactions mediated by such lytic substances may be significant in explaining the formation and maintenance of Alexandrium blooms through direct destructive effects on competing algae or unicellular grazers.     

Direct oxidation of boronates by peroxynitrite: Mechanism and implications in fluorescence imaging of peroxynitrite

In this study, we show that boronates, a class of synthetic organic compounds, react rapidly and stoichiometrically with peroxynitrite (ONOO⁻) to form stable hydroxy derivatives as major products. Using a stopped-flow kinetic technique, we measured the second-order rate constants for the reaction with ONOO⁻, hypochlorous acid (HOCl), and hydrogen peroxide (H₂O₂) and found that ONOO⁻ reacts with 4-acetylphenylboronic acid nearly a million times (k = 1.6 × 10⁶ M^− 1 s^− 1) faster than does H₂O₂ (k = 2.2 M^− 1 s^− 1) and over 200 times faster than does HOCl (k = 6.2 × 10³ M^− 1 s^− 1). Nitric oxide and superoxide together, but not alone, oxidized boronates to the same phenolic products. Similar reaction profiles were obtained with other boronates. Results from this study may be helpful in developing a novel class of fluorescent probes for the detection and imaging of ONOO⁻ formed in cellular and cell-free systems.     

Bottlenecks to water transport in Quercus robur L.: the abscission zone and its physiological consequences

Cladoptosis, the abscission of twigs, is the main mechanism of changes in crown structure in senescing pedunculate oak (Quercus robur L.). We tested the hypotheses that abscission zones in nodes of old pedunculate oak trees reduce leaf-specific hydraulic conductance of shoots and thereby limit the stomatal conductance and assimilation.Hydraulic conductance and leaf-specific hydraulic conductance, measured with a high pressure flowmeter in 0.5–1.5 m long shoots, were significantly lower in shoots of low vigour compared to vigorous growing shoots in a 165-years-old stand in the southeast of Germany. Two types of bottlenecks to water transport could be identified in shoots of old oak trees, namely nodes and abscission zones. In young twigs, vessel diameter and vessel density in nodes with abscission zones were significantly reduced compared with internodes. In nodes without abscission zones, vessel density was significantly reduced. The reduction of hydraulic conductance was especially severe in the smallest and youngest shoots with diameters less than 2 mm. Internodes of 1–5 mm sapwood diameter had an average hydraulic conductance of 7.13×10⁻⁶±0.2×10⁻⁶ kg s⁻¹ m⁻¹ MPa⁻¹, compared to 4.54×10⁻⁶±0.3×10⁻⁶ kg s⁻¹ m⁻¹ MPa⁻¹ in those with nodes.Maximum stomatal conductance and maximum net assimilation rate increased significantly with hydraulic conductance and leaf-specific hydraulic conductance. Maximum rate of net photosynthesis A_max of the most vigorous shoots (VC0) (7.34±0.55 μmol m⁻² s⁻¹) was significantly higher (P<0.001) than in shoots of other vigour classes (5.97±0.28 μmol m⁻² s⁻¹). Our data support the hypothesis that the changes in shoot and consequently crown architecture that are observed in ageing and declining trees can limit photosynthesis by reducing shoot hydraulic conductance. Abscission zones increase the hydraulic disadvantage of less vigorous compared to vigorously growing twigs. Cladoptosis might serve as a mechanism of selection between twigs of different efficiency.     

Characterization of galactomannans isolated from legume endosperms of Caesalpinioideae and Faboideae subfamilies by multidetection aqueous SEC

Galactomannans isolated from legume seed endosperms, including those of commercial interest, have been characterized by multidetection aqueous SEC. Galactomannans derived from seeds of the Faboideae subfamily had substantially higher M_w than those from Caesalpinioideae seeds (M_w,Fab = 2.4–3.1 × 10⁶ g/mol, M_w,Caes. = 0.86–2.1 × 10⁶ g/mol) and within the latter botanical subfamily, an apparent correlation between M_w and the degree of galactose substitution DG was found. The molar mass distributions were unimodal and differed primarily by a scale factor, with distributional widths narrower than a true Flory ‘most-probable distribution’; good fits to Schulz–Zimm model were obtained. Across subfamilies no differences were found in the exponents of [η]–M and R_v–M relationships (0.61 ± 0.02, 0.54 ± 0.01, respectively), the Flory chain stiffness ratio (C_∞ = 20 ± 1 (BSF analysis)), or the persistence length (L_p = 5.5 ± 0.2 nm) obtained from SEC fraction data. However, it was found that prefactors in the [η]–M and R_v–M relationships as well as the unperturbed parameter K_Θ decrease in proportion to DG and therefore chain density. Generalized relationships incorporating galactose-dependent prefactors were therefore developed to model SEC fraction data of native galactomannans ([η]_GM = (1800 ± 200) × M_o^−1.61 × M^0.61±0.02, R_v,GM = 0.63 ± 0.05 × M_o^−0.54 × M^0.54±0.01) as well as lower-M fractions obtained by ultrasonication ([η]_GM = (730 ± 100) × M_o^−1.71 × M_w^0.71±0.02, R_v,GM = 0.49 ± 0.05 × M_o^−0.57 × M_w^0.57±0.01, M ≈ 1 × 10⁵-native). As a consequence of this dependence and the observed patterns in molar mass variation, [η] varies within a narrow range for galactomannans as a whole despite substantial M_w differences.     

o-Phthalaldehyde–N-acetylcysteine polyamine derivatives: formation and stability in solution and in C18 supports

A comparative study of different derivatization procedures has been performed in order to improve the stability of the reaction products o-phthalaldehyde–N-acetylcysteine (OPA–NAC) polyamines. Procedures such as solution derivatization, solution derivatization followed by retention on a packing support, derivatization on different packing supports and on-column derivatization, have been optimized and compared. The degradation rate constant (k) of the derivative was dependent on the procedure used and on the analyte. For the spermine (the most unstable isoindol tested) k was 8±2×10⁻² min⁻¹ in solution versus 7.7±1.1×10⁻⁴ min⁻¹ on the (C₁₈) solid support. The results obtained showed that forming the derivative on the packing support (C₁₈) gave the best results following this procedure: conditioning the cartridges with borate buffer (1 ml, 0.5 M, pH 8), retention of the analyte, addition of 0.8 ml of OPA–NAC reagent, 0.2 ml borate buffer 0.8 M (pH 8) and elution of the isoindol with 3 ml of MeOH–borate buffer (9:1). The different derivatization procedures have been used to study the stability of the reaction products OPA–NAC polyamines formed in urine matrix using spermine as model compound. Similar results were obtained for standard solutions and urine samples.