Hyperexpression of a Bacillus circulans xylanase gene in Escherichia coli and characterization of the gene product.

A 4.0-kilobase (kb) fragment of Bacillus circulans genomic DNA inserted into pUC19 and encoding endoxylanase activity was subjected to a series of subclonings. A 1.0-kb HindIII-HincII subfragment was found to code for xylanase activity. Maximum expression levels were observed with a subclone that contained an additional 0.3-kb sequence upstream from the coding region. Enhancer sequences in the upstream region are thought to be responsible for these high expression levels. Southern hybridization analyses revealed that the cloned gene hybridized with genomic DNA from Bacillus subtilis and Bacillus polymyxa. Xylanase activity expressed by Escherichia coli harboring the cloned gene was located primarily in the intracellular fraction. Levels of up to 7 U/ml or 35 mg/liter were obtained. The protein product was purified by ion exchange and gel permeation chromatography. The xylanase had a molecular weight of 20,500 and an isoelectric point of 9.0.     

Hyperexpression of a Bacillus thuringiensis delta-endotoxin-encoding gene in Escherichia coli: properties of the product

Conditions for hyperexpression, in Escherichia coli, of the Bacillus thuringiensis var, kurstaki gene, cryIA9(c)73, encoding an insecticidal crystal protein, CryIA(c)73, were investigated by varying the promoter type, host cell, plasmid copy number, the second codon and number of terminators. The cryIA(c)73 gene was cloned into three E. coli expression vectors, pKK223-3 (Ptac promoter), pET-3a (P phi 10 promoter), and pUC19 (Ptac promoter). The level of cryIA(c)73 expression was measured by ELISA and compared to total cellular protein over growth periods of 24 and 48 h. Maximum expression levels of 284 microgram CryIA(C)73/ml (48% of cellular protein) were obtained in shake flasks with the Ptac promoter in E. coli JM103. Optimal conditions were found to be low-copy-number plasmid (pBR322 ori), 48 h of growth, in lon+ cells. A change of the gene's second codon to AAA can improve expression by two to three fold but is undetectable in the presence of a strong E. coli promoter. The cryIA(c)73 gene product, in E. coli, formed crystals with the same lattice structure as the native crystals formed in B. thuringiensis (as visualized by electron microscopy). Bioassay results (insect toxicity and specificity) of the crystal produced in E. coli were similar to that produced in B. thuringiensis.     

Expression of a xylanase gene of Bacillus pumilus in Escherichia coli and Bacillus subtilis

Summary A hybrid plasmid, pOXN29 (10.4 Mdal), coding the xylanase (xynA) and -xylosidase (xynB) genes of Bacillus pumilus IPO was constructed by the ligation of pBR322 and a 7.7 Mdal PstI-fragment of chromosomal DNA as reported in our previous paper (Panbangred et al. 1983). A deletion plasmid of pOXN29, pOXN293 (9.2 Mdal), which contains xynA and xynB, was ligated with pUB110 at an EcoRI site, and used to transform B. subtilis MI111. Two selected clones of B. subtilis as xylanase hyper-producers contained plasmids pOXW11 (4.2 Mdal) and pOXW12 (4.0 Mdal), both consisting of only pUB110, xynA, and its flanking regions, as the result of spontaneous deletion. These B. subtilis clones produced 2.7–3.0 times as much xylanase as B. pumilus. Escherichia coli and B. subtilis clones harbouring the hybrid plasmids synthesized xylanase and -xylosidase constitutively, whereas both enzymes were induced by xylose in B. pumilus.Xylanase synthesized by B. subtilis harbouring pOXW11 or pOXW12 was excreted into the medium like that of B. pumilus IPO, but xylanase synthesized in E. coli harbouring pOXN29, 293 or pOXW1 coding xynA was intracellular. In a previous investigation (Panbangred et al. 1983), xylanase was found to be located in the cytoplasm, not the periplasm nor the membrane fraction in E. coli cells harbouring pOXN29 derivatives. In spite of the abnormal location of xylanase synthesized in E. coli, the signal peptide was processed in the same way as in B. pumilus, with the same molecular weight and the same amino terminal sequences of xylanase prepared from E. coli cells and B. pumilus culture fluid.     

Molecular cloning of a Bacillus subtilis xylanase gene in Escherichia coli

A gene coding for xylanase synthesis in Bacillus subtilis was isolated by direct shotgun cloning using Escherichia coli as a host. Following partial digestion of B. subtilis chromosomal DNA with PstI or EcoRI restriction enzymes, fragments ranging from 3 to 7 kb were introduced into the PstI or EcoRI sites of pBR325. Transformed colonies having lost either the ampicillin or chloramphenicol resistance markers were screened directly on 1% xylan plates. Out of 8000 transformants, ten xylanase-positive clones were identified by the clearing zone around lysozyme-treated colonies. Further characterization of one of the clones showed that the xylanase gene was present in a 3.9-kb insert within the PstI site of the plasmid pBR325. Retransformation of E. coli strain with the xylanase-positive hybrid plasmid pRH271 showed 100% transformation to xylanase production. The intracellular xylanase produced by the transformed E. coli was purified by ion exchange and gel permeation chromatography. The electrophoretic mobility of the purified xylanase indicated an Mr of 22 000.     

Expression of Bacillus circulans Teri-42 xylanase gene in Bacillus subtilis

The xylanase gene of Bacillus circulans Teri-42 was cloned in both B. subtilis and Escherichia coli. The enzyme activity was almost 87% higher in B. subtilis (pBA7) than in E. coli (pAQ4). No cellulase activity was detected in the clones, B. subtilis (pBA7) and E. coli (pAQ4). Approximately 1120 U (80%) of the xylanase was secreted extracellularly by the clone B. subtilis (pBA7) as compared to 79 U (88%) excreted in E. coli (pAQ4). In B. subtilis (pBA7) the optimal xylanase activity was at pH 7.0 and 50 degrees C, which was the same as that of the parent B. circulans Teri-42. The recombinant xylanase in B. subtilis was more stable at higher temperatures than the parent B. circulans Teri-42. Purification of xylanase from the clone B. subtilis (pBA7) showed a 71 kDa polypeptide similar to that observed in B. circulans Teri-42.     

Purification and characterization of a Bacillus circulans No. 4.1 chitinase expressed in Escherichia coli

Summary A DNA fragment encoding for 598 amino acids of chitinase protein from Bacillus circulans No. 4.1 was subcloned into pQE-30 expression vector and transformed into Escherichia coli M15 (pREP4). The molecular weight of the expressed protein was approximately 66 kDa. Enzymatic activity of the recombinant protein was assayed after purification using affinity chromatography on a nickel chelating resin. The enzyme hydrolyzed N-acetylchitooligosaccharides mainly to N-acetylchitobiose, and was active toward chitin, carboxymethyl-chitin, colloidal chitin, glycol chitin and 4-methylumbelliferyl-β-d-N, N′-diacetylchitobiose. The pH and temperature optima of the chitinase enzyme were 7.0 and 45 °C, respectively. This enzyme was stable in the pH range of 5.0–9.0 and at temperatures up to 50 °C. In addition, when cleaved by a proteolytic enzyme, the 20-kDa product could retain high chitinolytic activity.     

Cloning, characterization, and expression of xylanase gene from Bacillus lyticus in Escherichia coli and Bacillus subtilis.

A genomic library of Bacillus lyticus was constructed in lambda GEM 11 vector and screened for the xylanase gene using Congo red plate assay. A 16-kb fragment containing the xylanase gene was obtained which was further subcloned using Mbo I partial digestion in an E. coli pUC 19 vector. A 1.3-kb sub-fragment was obtained which coded for a xylanase gene of Mr 23,650 Da. This fragment was sequenced and the homology was checked with known xylanases. The maximum homology was 97%, which was obtained with an endo xylanase gene from Bacillus species at the DNA level, while the translated sequence showed only one amino acid change from alanine to serine at position number 102. Expression was checked in E. coli, using the native promoter, and an extracellular activity of 5.25 U/mL was obtained. Cloning of the gene was done in Bacillus subtilis using a shuttle vector pHB 201, which resulted in increasing the basal level xylanase activity from 14.02 to 22.01 U/mL.     

Cloning and expression of raw-starch-digesting alpha-amylase gene from Bacillus circulans F-2 in Escherichia coli

The raw potato-starch-digesting alpha-amylase gene of Bacillus circulans F-2 was cloned for the first time in Escherichia coli C600, using plasmid pYEJ001. The recombinant plasmid, named pYKA3, has a 5.4 kb insert from a chromosome of the donor bacterium. Subcloning of this amylase gene gave plasmid pHA300 which carried 3.15 kb of the inserted DNA. The transformed bacterium, E. coli C600 (pYKA3), produced the amylase in the periplasmic space, whereas it is secreted outside the cell in the donor bacterium. The cloned raw-starch-digesting alpha-amylase has a molecular weight of 93,000 on SDS-PAGE, and its action pattern was absolutely the same as that of the potent raw-starch-digestible amylase produced by B. circulans F-2. The periplasmic amylase produced by the transformed E. coli (pHA300) could digest raw starch granules such as potato, corn and barley raw starch granules, indicating that the raw-starch-digesting amylase is active in E. coli. Furthermore, this amylase crossreacted with the rabbit antiserum raised against the raw potato-digesting alpha-amylase of B. circulans F-2. From these results it was concluded that the cloned amylase is the same amylase protein as B. circulans F-2 amylase, which has a potent raw-starch digestibility. Thus, this paper is to our knowledge the first describing the molecular cloning of raw-starch-digesting alpha-amylase from Bacillus species and its successful expression in E. coli.     

Isolation and characterization of the Escherichia coli mutL gene product

The Escherichia coli mutL gene product has been purified to near homogeneity from an overproducing clone. The mutL locus encodes a polypeptide of 70,000 daltons as determined by denaturing gel electrophoresis. The native molecular weight of MutL protein as calculated from the sedimentation coefficient of 5.5 S and Stokes radius of 61 A is 139,000 daltons, indicating that MutL exists as a dimer in solution. In addition to its ability to complement methyl-directed DNA mismatch repair in mutL-deficient cell-free extracts, DNase I protection experiments demonstrate that the purified MutL protein interacts with the MutS-heteroduplex DNA complex in the presence of ATP.     

Isolation and characterization of the Escherichia coli mutH gene product

The Escherichia coli mutH gene product has been isolated in near homogeneous form using an in vitro complementation assay for DNA mismatch correction (Lu, A.-L., Clark, S., and Modrich, P. (1983) Proc. Natl. Acad. Sci. U.S.A. 80, 4639-4643) which is dependent on mutH function. The protein has a subunit Mr of 25,000, and purified preparations contain a Mg2+-dependent endonuclease activity which cleaves 5' to the dG of d(GATC) sequences to generate 5'-phosphoryl and 3'-hydroxyl termini. Symmetrically methylated d(GATC) sites are resistant to the endonuclease, hemimethylated sequences are cleaved on the unmethylated strand, and unmethylated d(GATC) sites are usually subject to scission on only one DNA strand. Although this endonuclease activity is extremely weak (less than 1 scission/h/mutH monomer equivalent) and cleavage at a d(GATC) site does not depend on the presence of a mismatched base pair within the DNA substrate, the activity does not appear to be a contaminant of mutH preparations. d(GATC) endonuclease activity and mutH complementing activity co-purify through multiple column steps without change in relative specific activities, and both activities co-electrophorese under native conditions. These findings suggest that the mutH product functions at the strand discrimination stage of mismatch correction and that this stage of the reaction involves scission of the unmethylated DNA strand.     

Hyperexpression of the osmB gene in an acidic phospholipid-deficient Escherichia coli mutant

An Escherichia coli pgsA null mutant deficient in acidic phospholipids shows a thermosensitive cell lysis phenotype because of activation of the Rcs phosphorelay signal transduction system. We conducted a DNA microarray analysis with special attention to the genes affected by growth temperature in the mutant deficient in acidic phospholipids. Among the genes identified as highly expressed at high temperature in the pgsA null mutant, the osmB gene was shown to be dependent on the Rcs system for the high expression by dot blot hybridization. Induction of the cloned osmB in the pgsA null mutant caused the thermosensitive defect even in the absence of the Rcs system. Although the deletion of osmB did not suppress the thermosensitivity in the presence of the Rcs system, indicating a multifactorial nature of the deleterious effect of the Rcs activation, we suggest that the osmB hyperexpression is one of the causes of the Rcs-dependent lysis phenotype of the pgsA null mutant.     

Molecular cloning and characterization of the beta-amylase gene from Bacillus circulans

A gene encoding the beta-amylase of Bacillus circulans was isolated from a lambda library and sequenced. The structural gene consists of a 1725 bp open reading frame encoding a polypeptide with a predicted molecular wt of 62830 Daltons. Two active forms of the enzyme were found when the gene was expressed in E. coli. The larger 60 kD form was approximately 3 kD larger than the mature beta-amylase secreted from B. circulans, suggesting that processing of this protein is different between the two species. The smaller 49 kD form is also present at a low level in B. circulans and may result from proteolytic cleavage. The enzyme has a temperature optimum of 50 degrees C. Two other genes, one encoding an alpha-amylase and one a pullulanase, were also isolated from the lambda library.     

Detection and characterization of serine and threonine hydroxyl protons in Bacillus circulans xylanase by NMR spectroscopy

Hydroxyl protons on serine and threonine residues are not well characterized in protein structures determined by both NMR spectroscopy and X-ray crystallography. In the case of NMR spectroscopy, this is in large part because hydroxyl proton signals are usually hidden under crowded regions of ¹H-NMR spectra and remain undetected by conventional heteronuclear correlation approaches that rely on strong one-bond ¹H–¹⁵N or ¹H–¹³C couplings. However, by filtering against protons directly bonded to ¹³C or ¹⁵N nuclei, signals from slowly-exchanging hydroxyls can be observed in the ¹H-NMR spectrum of a uniformly ¹³C/¹⁵N-labeled protein. Here we demonstrate the use of a simple selective labeling scheme in combination with long-range heteronuclear scalar correlation experiments as an easy and relatively inexpensive way to detect and assign these hydroxyl proton signals. Using auxtrophic Escherichia coli strains, we produced Bacillus circulans xylanase (BcX) labeled with ¹³C/¹⁵N-serine or ¹³C/¹⁵N-threonine. Signals from two serine and three threonine hydroxyls in these protein samples were readily observed via ³J_C–OH couplings in long-range ¹³C-HSQC spectra. These scalar couplings (~5–7 Hz) were measured in a sample of uniformly ¹³C/¹⁵N-labeled BcX using a quantitative ¹³C/¹⁵N-filtered spin-echo difference experiment. In a similar approach, the threonine and serine hydroxyl hydrogen exchange kinetics were measured using a ¹³C/¹⁵N-filtered CLEANEX-PM pulse sequence. Collectively, these experiments provide insights into the structural and dynamic properties of several serine and threonine hydroxyls within this model protein.     

Molecular cloning and characterization of the beta-amylase gene from Bacillus circulans

A gene encoding the β-amylase of Bacillus circulans was isolated from a lambda library and sequenced. The structural gene consists of a 1725 bp open reading frame encoding a polypeptide with a predicted molecular wt of 62830 Daltons. Two active forms of the enzyme were found when the gene was expressed In E. coli. The larger 60 kD form was approximately 3 kD larger than the mature β-amylase secreted from B. circulans, suggesting that processing of this protein is different between the two species. The smaller 49 kD form is also present at a low level in B. circulans and may result from proteolytic cleavage. The enzyme has a temperature optimum of 50°C. Two other genes, one encoding an α-amylase and one a pullulanase, were also isolated from the lambda library.     

Cloning, sequencing and expression of the xylanase gene from a Bacillus subtilis strain B10 in Escherichia coli

Bacillus subtilis strain B10 was isolated for degumming of ramie blast fibers, and a fragment of 642-bp was amplified from chromosomal DNA by using primers directed against the sequence of Bacillus subtilis xylanase gene given in GenBank. The positive clones were screened on the selected LB agar plates supplemented with xylan by Congo-red staining method. The recombinant plasmid from one positive clone was used for further analysis and DNA sequencing. The gene sequence is different from the reported xylanase gene sequence in sites of two base pairs. The recombinant plasmid was expressed in Escherichia coli, and xylanase activity was measured. The xylanase distribution in extracellular, intracellular and periplasmic fractions were about 22.4%, 28.0% and 49.6%, respectively. The xylanase had optimal activity at pH 6.0 and 50 degrees C.     

Secondary structure and NMR assignments of Bacillus circulans xylanase.

Bacillus circulans xylanase (BCX) is a member of the family of low molecular weight endo-beta-(1,4)-xylanases. The main-chain 1H, 13C, and 15N resonances of this 20.4-kDa enzyme were assigned using heteronuclear NMR experiments recorded on a combination of selectively and uniformly labeled protein samples. Using chemical shift, NOE, J coupling, and amide hydrogen exchange information, 14 beta-strands, arranged in a network of three beta-sheets, and a single alpha-helix were identified in BCX. The NMR-derived secondary structure and beta-sheet topology agree closely with that observed in the crystal structure of this protein. The HN of Ile 118 has a strongly upfield-shifted resonance at 4.03 ppm, indicative of a potential amide-aromatic hydrogen bond to the indole ring of Trp 71. This interaction, which is conserved in all low molecular weight xylanases of known structure, may play an important role in establishing the active site conformation of these enzymes. Following hen egg white and bacteriophage T4 lysozymes, B. circulans xylanase represents the third family of beta-glycanases for which extensive NMR assignments have been reported. These assignments provide the background for detailed studies of the mechanism of carbohydrate recognition and hydrolysis by this bacterial xylanase.     

Hyperexpression in Escherichia coli, purification, and characterization of the metallo-beta-lactamase of Bacillus cereus 5/B/6.

We used site-directed mutagenesis to introduce both a NdeI restriction endonuclease site and an initiator codon at the junction of the leader and structural gene sequences of the metallo-beta-lactamase of Bacillus cereus 5/B/6. This construct allowed us to clone just the beta-lactamase structural gene sequence into an Escherichia coli expression vector. E. coli cells were transformed with the recombinant plasmid, the B. cereus beta-lactamase was expressed, and these E. coli cells were disrupted by sonic oscillation. When the resultant suspensions were clarified by ultracentrifugation, the B. cereus beta-lactamase represented 15% of the total protein in the supernatant. Subsequent gel filtration and ion-exchange chromatography allowed the first reported purification to homogeneity of the B. cereus beta-lactamase from E. coli with an 87% recovery and an overall yield of 17 mg of enzyme per liter of cell culture. The electrophoretic mobilities of the enzyme expressed in and purified from E. coli and the enzyme purified directly from B. cereus were identical in both native and sodium dodecyl sulfate gel electrophoreses. As with the B. cereus enzyme, Km and Vmax (using cephalosporin C as substrate) for the enzyme purified from E. coli were 0.39 mM and 1333 units/mg protein, respectively. Likewise, the Co(II)-reconstituted enzyme purified from E. coli, which retained 29% of the activity of the Zn(II) enzyme, had electronic absorption spectra with maxima at 347, 551, 617, and 646 nm with extinction coefficients of 900, 250, 173, and 150 M-1 cm-1, respectively.     

Structural and biochemical characterization of the Escherichia coli argE gene product.

The DNA sequence of a 2,100-bp region containing the argE gene from Escherichia coli has been determined. The nucleotide sequence of the ppc-argE intergenic region was also solved and shown to contain six tandemly repeated REP sequences. Moreover, the oxyR gene has been mapped on the E. coli chromosome and shown to flank the arg operon. The codon responsible for the translation start of argE was determined by using site-directed mutants. This gene spans 1,400 bp and encodes a 42,350-Da polypeptide. The argE3 allele and a widely used argE amber gene have also been cloned and sequenced. N-Acetylornithinase, the argE product, has been overproduced and purified to homogeneity. Its main biochemical and catalytic properties are described. Moreover, we demonstrate that the protein is composed of two identical subunits. Finally, the amino acid sequence of N-acetylornithinase is shown to display a high degree of identity with those of the succinyldiaminopimelate desuccinylase from E. coli and carboxypeptidase G2 from a Pseudomonas sp. It is proposed that this carboxypeptidase might be responsible for the acetylornithinase-related activity found in the Pseudomonas sp.