Inclusion complexes of ketosteroids with beta-cyclodextrin

Inclusion complexes of several steroid derivatives with beta-cyclodextrin (7) were studied in dimethylsulfoxide solution. The investigated molecules were ketosteroids with different functional groups on the skeleton: 3beta-acetoxypregn-5-en-20-one (1), 3beta-acetoxypregna-5,16-dien-20-one (2), 3beta-acetoxyandrost-5-en-17-one (3), 3beta-hydroxyandrost-5-en-17-one (4), 5alpha-androstane-3,17-dione (5) and 17beta-hydroxyandrost-4-en-3-one (6). Complex formation was monitored by two-dimensional ROESY experiments through the detection of intermolecular dipolar interactions. In case of inclusion complex formation, the steroid molecule penetrates the cavity of the cyclodextrin and dipole-dipole interactions (ROEs) can be detected between the glucose H-3 and H-5 protons inside the cyclodextrin cavity and the steroid skeletal protons. Intermolecular interactions were detected in all six cases. However, ROESY experiments provided data indicating only partial immersion (A and B ring of the steroid skeleton) in case of 1, 2 and 6. On the contrary, compounds 3 and 5, showing the most correlation rich spectra, seem to fully immerse in the beta-cyclodextrin cavity.     

Crystal structure of cyclomaltoheptaose (beta-cyclodextrin) complexes with p-aminobenzoic acid and o-aminobenzoic acid

Crystal structures of cyclomaltoheptaose (beta-cyclodextrin) complexes with p-aminobenzoic acid and o-aminobenzoic acid have been determined by single-crystal X-ray diffraction. The space group of the beta-cyclodextrin-p-aminobenzoic acid complex is P2(1) with a host:guest stoichiometry of 1:1, and that of the beta-cyclodextrin-o-aminobenzoic acid complex is P1 with a stoichiometry of 2:3. The different structures of the guest molecules lead to the different molecular packing structures of the two complexes. Intermolecular hydrogen-bond interactions are the main force that stabilize the supramolecular systems. In both crystals, there are water molecules located near the cavity rims and in interstices between molecules of beta-cyclodextrin participating in formation of intermolecular hydrogen bonds.     

Crystallographic analysis of the thermal motion of the inclusion complex of cyclomaltoheptaose (beta-cyclodextrin) with hexamethylenetetramine

The crystal structure of the inclusion complex of cyclomaltoheptaose (beta-cyclodextrin) with hexamethylenetetramine was determined at temperatures of 123, 173, 223, and 293 K. The rigid-body motion of the host and guest molecules was evaluated by means of the TLS method that represents the molecular motion in terms of translation, libration, and screw motion. In increasing the temperature from 123 to 293 K, the amplitude of the rigid body vibration of the host molecule was increased from 1.0 to 1.3 degrees in the rotational motion and from 0.16 to 0.17 A in the translational motion. The cyclomaltoheptaose molecule has the flexibility in seven alpha-(1-->4)-linkages, and each glucose unit was in the rotational vibration around an axis through two glycosidic oxygen atoms. As a result, the rigid-body parameters of cyclomaltoheptaose were considered to be overestimated because of including the contribution from the local motion of glucose units. In contrast, for the guest molecule having no structural flexibility, the TLS analysis demonstrated that the atomic thermal vibration was mostly derived from the rigid body motion. The rotational amplitude of hexamethylenetetramine was changed from 5.2 to 6.6 degrees in increasing the temperature from 123 to 293 K, while the change of the translational amplitude was from 0.20 to 0.23 A. The translational motion of the guest molecule was hindered by the inside wall of the host cavity. The molecular motion was characterized by the rotational vibration around the axis through two nitrogen atoms that were involved in the hydrogen-bond formation.     

The molecular crystal structure and self-assembly behavior of 6(I)-O-(3-nitrophenyl)cyclomaltoheptaose

The mono-modified beta-cyclodextrin derivative, 6(I)-O-(3-nitrophenyl)cyclomaltoheptaose{mono[6-O-(3-nitrophenyl)]-beta-cyclodextrin} was synthesized, and its crystal structure was determined by single-crystal X-ray analysis. The crystal structure suggests that the 3-nitrophenyl substituent group is inserted into the adjacent beta-cyclodextrin cavity from the secondary hydroxyl side, and the molecules are stacked along the twofold screw axis to form an infinite one-dimensional polymeric chain.     

Inclusion complexes of paclitaxel and oligo(ethylenediamino) bridged bis(beta-cyclodextrin)s: solubilization and antitumor activity

The inclusion complexation behavior of paclitaxel with a series of oligo(ethylenediamino) bridged bis(beta-cyclodextrin)s possessing bridge chains in different length (1-4) has been investigated in order to improve the water solubility of paclitaxel. It is found that only the long-tethered bis(beta-cyclodextrin)s 1 and 2 can form the inclusion complexes with paclitaxel, which are characterized by NMR, SEM, XRD, FT-IR, TG-DTA, DSC, and microcalorimetry technology. The results obtained show that bis(beta-cyclodextrin)s 1 and 2 are able to solubilize paclitaxel to high levels up to 2 and 0.9 mg/mL, respectively. The high complex stability of bis(beta-cyclodextrin) 1 and paclitaxel is discussed from thermodynamic viewpoint. Furthermore, the cytotoxicity of these complexes assessed using a human erythroleukemia K562 cell line indicates that the IC(50) value of 1/paclitaxel complex is 6.0 x 10(-10) mol/dm(3) (calculated as paclitaxel molar concentration), which means that the antitumor activity of 1/paclitaxel complex is better than that of parent paclitaxel (IC(50) value 9.8 x 10(-10) mol/dm(3)). This high antitumor activity, along with the satisfactory water solubility and high thermal stability of the 1/paclitaxel complex, will be potentially useful for its clinical application as a highly effective antitumor drug.     

Quantitative detection of bisphenol A and bisphenol A diglycidyl ether metabolites in human plasma by liquid chromatography–electrospray mass spectrometry

Due to the ubiquity of epoxy resin compounds and their potential role in increasing the risk for reproductive dysfunction and cancer, the need for an assessment of human exposure is urgent. Therefore, we developed a method for measuring bisphenol A (BPA) and bisphenol A diglycidyl ether (BADGE) metabolites in human blood samples using high-performance liquid chromatography–electrospray ionization mass spectrometry (LC–MS). Human blood samples were processed using enzymatic deconjugation of the glucuronides followed by a novel sample preparation procedure using a solid-phase-cartridge column. This selective analytical method permits rapid detection of the metabolites, free BPA and a hydrolysis product of BADGE (BADGE-4OH) with detection limits in the low nanogram per milliliter range (0.1 ng ml⁻¹ of BPA and 0.5 ng ml⁻¹ of BADGE-4OH). The sample extraction was achieved by Oasis HLB column on gradient elution. The recoveries of BPA and BADGE-4OH added to human plasma samples were above 70.0% with a standard deviation of less than 5.0%. This selective, sensitive and accurate method will assist in elucidating potential associations between human exposure to epoxy-based compounds and adverse health effects.     

Metabolism of bisphenol A in zebrafish (Danio rerio) and rainbow trout (Oncorhynchus mykiss) in relation to estrogenic response

The kinetics of bisphenol A (BPA) were investigated in zebrafish (Danio rerio) exposed to 100 microg BPA/l. BPA uptake was measured during a 7-day period followed by an elimination phase of similar duration. After 2, 6, 12, 24, 48, 72, 120 and 168 h of uptake/elimination, fish were analysed for their content of BPA, bisphenol A glucuronic acid (BPAGA) and bisphenol A sulfate (BPAS). Within the first 24 h steady state levels of BPA, BPAGA and BPAS were reached and the total body concentrations were calculated to be 569, 12,600 and 39.9 ng/g fish, respectively. Elimination rates of the three compounds in zebrafish were estimated by fitting the data to a compartment model. An initial rapid elimination phase was observed for BPA and BPAS with total body half lives (T(1/2)) of <1.1 h and 30 min, followed by a slower second elimination phase with T(1/2) values of 139 and 71 h, respectively. Excretion of BPAGA occurred from a single compartment with a T(1/2) of 35 h. The steady state concentration of BPA and its metabolites were investigated in rainbow trout (Oncorhynchus mykiss) exposed to 100 microg BPA/l. The toxicokinetic parameters from zebrafish and rainbow trout were compared; including previously published data on the rainbow trout. The data indicate that the smaller estrogenic sensitivity observed for the zebrafish may be caused by a more rapid metabolism of BPA in the zebrafish liver.     

Metal-heptaiodide interactions in cyclomaltoheptaose (beta-cyclodextrin) polyiodide complexes as detected via Raman spectroscopy

The Raman spectra of the cyclomaltoheptaose (beta-cyclodextrin, beta-CD) polyiodide complexes (beta-CD)(2).NaI(7).12H(2)O, (beta-CD)(2).RbI(7).18H(2)O, (beta-CD)(2).SrI(7).17H(2)O, (beta-CD)(2).BiI(7).17H(2)O and (beta-CD)(2).VI(7).14H(2)O (named beta-M, M stands for the corresponding metal) are investigated in the temperature range of 30-140 degrees C. At room temperature all systems show an initial strong band at 178 cm(-1) that reveals similar intramolecular distances of the disordered I(2) units (approximately 2.72 A). During the heating process beta-Na and beta-Rb display a gradual shift of this band to the final single frequency of 166 cm(-1). In the case of beta-Sr and beta-Bi, the band at 178 cm(-1) is shifted to the final single frequencies of 170 and 172 cm(-1), respectively. These band shifts imply a disorder-order transition of the I(2) units whose I-I distance becomes elongated via a symmetric charge-transfer interaction I(2)<--I3(-)-->I(2). The different final frequencies correspond to different bond lengthening of the disordered I(2) units during their transformation into well-ordered ones. In the Raman spectra of beta-V, the initial band at 178 cm(-1) is not shifted to a single band but to a double one of frequencies 173 and 165 cm(-1), indicating a disorder-order transition of the I(2) molecules via a non-symmetric charge-transfer interaction I(2)<--I3(-)-->I(2). The above spectral data show that the ability of I3(-) to donate electron density to the attached I(2) units is determined by the relative position of the different metal ions and their ionic potential q/r. The combination of the present results with those obtained from our previous investigations reveals that cations with an ionic potential that is lower than approximately 1.50 (Cs(+), Rb(+), Na(+), K(+) and Ba(2+)) do not affect the Lewis base character of I3(-). However, when the ionic potential of the cation is greater than approximately 1.50 (Li(+), Sr(2+), Cd(2+), Bi(3+) and V(3+)), the M(n+)...I3(-) interactions become significant. In the case of a face-on position of the metal (Sr(2+), Bi(3+)) relative to I3(-), the charge-transfer interaction is symmetric. On the contrary, when the metal (Li(+), Cd(2+), V(3+)) presents a side-on position relative to I3(-), the charge-transfer interaction is non-symmetric.     

Crystal structures of cyclomaltohexaose (α-cyclodextrin) complexes with p-chlorophenol and p-cresol

Crystal structures of cyclomaltohexaose (α-cyclodextrin) complexes with p-chlorophenol and p-cresol have been determined by single-crystal X-ray diffraction studies. The space group of the α-cyclodextrin–p-chlorophenol complex is P2₁2₁2₁ with unit cell dimensions of a=15.299(3), b=24.795(5), c=13.447(5) Å, and that of the α-cyclodextrin–p-cresol complex is P2₁ with unit cell dimensions of a=7.927(7), b=13.568(7), c=24.54(1) Å, β=90.41(8)°. In spite of the similar structures of guest molecules, both complexes have different inclusion modes and packing structures.     

Covalent molecular imprinting of bisphenol A using its diesters followed by the reductive cleavage with LiAlH(4)

Bisphenol A (BPA) recognition materials were synthesized by a covalent imprinting technique using BPA-dimethacrylate or BPA-diacrylate as the template monomer. Binding sites in the polymers consisted of two hydroxyl groups that are generated by reducing the ester bonds of the template monomer with lithium aluminum hydride. The polymers strongly adsorbed BPA and structurally related compounds, however, other endocrine disruptors were hardly adsorbed. The BPA-dimethacrylate-based polymer interacted with the samples more strongly than the BPA-diacrylate-based polymer.     

Inclusion of carvone enantiomers in cyclomaltoheptaose (beta-cyclodextrin): thermal behaviour and H-->D and D-->H exchange

The inclusion compounds of carvone enantiomers in cylcomaltoheptaose (beta-cyclodextrin, betaCD) are studied at defined temperatures above room temperature and in relation to H-->D and D-->H exchanges. Loss of water molecules and release of carvone molecules from the betaCD cavity are caused by increase of temperature above room temperature and are measured by the integrated intensities of the O-H and C-H Raman stretching bands, respectively. In turn, H-->D and D-->H exchanges are monitored by the integrated intensities of the O-H and O-D Raman stretching bands, respectively. All of these processes were followed in real time with a Raman spectrometer equipped with CCD detection. The results indicate that distinct carvone enantiomers lead to the formation of different betaCD inclusion hydrates that have different water content and hydration structures. In particular, the results suggest that SCarv-betaCD has a greater water content, dehydrates strongly for temperatures above room temperature, and exchanges protons faster than the RCarv-betaCD complex.     

Molecular dynamics (MD) simulations for the prediction of chiral discrimination of N-acetylphenylalanine enantiomers by cyclomaltoheptaose (beta-cyclodextrin, beta-CD) based on the MM-PBSA (molecular mechanics-Poisson-Boltzmann surface area) approach

Molecular dynamics (MD) simulations were performed for the prediction of chiral discrimination of N-acetylphenylalanine enantiomers by cyclomaltoheptaose (beta-cyclodextrin, beta-CD). Binding free energies and various conformational properties were obtained using by the MM-PBSA (molecular mechanics Poisson-Boltzmann/surface area) approach. The calculated relative difference (DeltaDeltabinding) of binding free energy was in fine agreement with the experimentally determined value. The difference of rotameric distributions of guest N-acetylphenylalanine enantiomers complexed with the host, beta-CD, was observed after the conformational analyses, suggesting that the conformational changes of guest captured within host cavity would be a decisive factor for enantiodifferentiation at a molecular level.     

双酚A对斑马鱼胚胎的毒性作用

Bisphenol A(BPA)is a chemical estrogen-like sub-stance with properties that are of environmental concern.It is widely used in the chemical industry to manufactureepoxy-and polyester-styrene resins.It has been reportedthat BPA ranges between0and33μg in each plasticcup[1].After atwo-weekexposureto0.5%bisphenol Aithas beenreportedthat disattachments betweensertoli cellsand spermatogonia were observed while spermatogoniawere arrangedin disorder and displacement of spermatogo-nia away fromthe basement membrance ...     

Biological and enzymatic treatment of bisphenol A and other endocrine disrupting compounds: a review

Bisphenol A is predominantly used as an intermediate in the production of polycarbonate plastics and epoxy resins. Traces of bisphenol A released into the environment can reach into the wastewater and soil via application of sewage sludge from wastewater treatment systems that receive water containing bisphenol A, or from leachate from uncontrolled landfills. In this study we have made an effort to review the work on the presence of bisphenol A and other related endocrine disrupting compounds in the environment and their impact on the life of living organisms including human beings. Bisphenol A has several implications on the health of human beings as well it can also affect the growth of plants and animals. Number of physicochemical methods such as adsorption, membrane based filtration, ozonation, fenton, electrochemical and photochemical degradation has been used for the removal of bisphenol A. However, these methods have some inherent limitations and therefore cannot be used for large scale treatment of such pollutants. The alternative procedures have attracted the attention of environmental scientists. Biological methods are looking quite promising and these procedures are helpful in the complete degradation of bisphenol A and related compounds. Several bacterial, fungal, and algal strains and mixed cultures have successfully been employed for the degradation of bisphenol A. Recently, enzymatic methods have attracted the attention of the environmentalists for the treatment of bisphenol A and other endocrine disrupting compounds. Numerous types of oxidoreductases; laccases, tyrosinases, manganese peroxidase, lignin peroxidase, polyphenol oxidases, horseradish peroxidase and bitter gourd peroxidase have exhibited their potential for the remediation of such types of compounds. The cytochrome P 450 monooxygenases and hemoglobin have also participated in the degradation of bisphenol A and other related endocrine disrupting compounds. Various redox mediators, surfactants and additives have also enhanced enzymatic oxidation of bisphenol A and other related endocrine disrupting compounds.     

双酚A与镉对植物光合作用的复合微生态效应

近年来,国内外学者研究了双酚A (BPA)及重金属镉(Cd)单一因子对植物光合作用的影响.但在自然背景下,污染多呈复合型,因此研究BPA和Cd对二者叠加的空间内植物光合作用的复合影响意义重大.本文综述了BPA对植物光合作用的影响及机制,及Cd对植物光合作用的影响及其机制,其中单一BPA和Cd对植物光合作用的影响均表现为:低浓度促进光合作用,高浓度反之.根据相关研究推测了植物在受到复合胁迫时的生态响应,相应的生理生化反应,及光合过程的响应机制.最后提出了BPA与Cd对植物复合胁迫可能开展的相关研究方向.     

Biodegradation of bisphenol A by bacterial consortia

The effect of light on BPA degradation by an adapted bacterial consortium was investigated. BPA was completely degraded up to 50 mg l⁻¹, and the degradation followed first-order reaction kinetics both in the light and in the dark. The degradation half-life of BPA when the consortium was grown in presence of light was 21.9, 17.2, and 12.6 h for concentrations of 10, 20, and 50 mg l⁻¹, respectively; the degradation half-life of BPA in the dark was 13.1, 10.8, and 10.2 h for concentrations of 10, 20, and 50 mg l⁻¹, respectively. Therefore, light inhibited BPA biodegradation. However, under both conditions, BPA was completely depleted. The bacterial consortium effectively utilised BPA as a growth substrate to sustain a cell yield of 0.95 g g⁻¹ and 0.97 g g⁻¹ in the light and dark, respectively. A total of ten and nine biodegradation intermediates were detected in the light and dark, respectively. Three bacterial metabolic pathways and one photodegradation pathway were proposed to explain their occurrence. This study demonstrated that bacterial consortia may assemble a wide range of catabolic pathways to allow for efficient degradation of BPA, converting BPA to principally bacterial biomass and metabolites exhibiting low or no oestrogenic activity.     

Inclusion complexes of azadirachtin with native and methylated cyclodextrins: solubilization and binding ability

The inclusion complexation behavior of azadirachtin with several cyclodextrins and their methylated derivatives has been investigated in both solution and the solid state by means of XRD, TG-DTA, DSC, NMR, and UV-vis spectroscopy. The results show that the water solubility of azadirachtin was obviously increased after resulting inclusion complex with cyclodextrins. Typically, beta-cyclodextrin (beta-CD), dimethyl-beta-cyclodextrin (DMbetaCD), permethyl-beta-cyclodextrin (TMbetaCD), and hydroxypropyl-beta-cyclodextrin (HPbetaCD) are found to be able to solubilize azadirachtin to high levels up to 2.7, 1.3, 3.5, and 1.6 mg/mL (calculated as azadirachtin), respectively. This satisfactory water solubility and high thermal stability of the cyclodextrin-azadirachtin complexes, will be potentially useful for their application as herbal medicine or healthcare products.     

New cyclomaltoheptaose (beta-cyclodextrin) derivative 2-O-(2-hydroxybutyl)cyclomaltoheptaose: preparation and its application for the separation of enantiomers of drugs by capillary electrophoresis

A new soluble cyclomaltoheptaose (cyclodextrin) derivative, 2-O-(2-hydroxybutyl)cyclomaltoheptaose [2-O-(2-hydroxybutyl)-beta-cyclodextrin, 2-HB-beta-CD], was prepared and studied as an efficient chiral selector in the separation of racemic mixtures of drugs by capillary electrophoresis (CE). Results showed that 2-HB-beta-CD could provide higher separating capability than that of beta-CD and the similarly substituted 2-HP-beta-CD.     

Structure of inclusion complexes of cyclomaltoheptaose (cycloheptaamylose): crystal structure of the 1-adamantanemethanol adduct

Cyclomaltoheptaose (cycloheptaamylose) has been crystallized with 1-adamantanemethanol as the guest molecule. The complex crystallized in space group C222(1), with unit-cell dimensions a = 19.162 (13), b = 23.965 (17), and c = 32.597 (27) A. The structure was solved by rotation-translation search-methods. The cyclomaltoheptaose exists as a dimer in the crystal by means of extensive hydrogen-bonding across the secondary hydroxyl ends of two cyclomaltoheptaose molecules. The two halves of the dimer are related by a crystallographic two-fold axis. The primary hydroxyl ends of two adjacent cyclomaltoheptaose molecules are also related by a crystallographic two-fold axis, but do not directly hydrogen bond to one another. Instead, they are held in place by a strong hydrogen bond from the hydroxyl group of the 1-adamantanemethanol to a primary hydroxyl group on an adjacent cyclomaltoheptaose molecule. Other stabilizing hydrogen bonds are formed via three water molecules which are situated at the primary hydroxyl interface, and others that form parallel columns stabilizing the crystal structure. A unique feature of this complex is the presence of trapped water in the cavity at the secondary hydroxyl interface. This water is distributed over 3 disordered sites. Its presence blocks one possible site for the 1-adamantanemethanol, which, instead, binds near the primary hydroxyl end, with its hydroxyl group and part of the adamantane moiety protruding from the cyclomaltoheptaose.     

Bisphenol A, an environmental endocrine-disrupting chemical, inhibits hypoxic response via degradation of hypoxia-inducible factor 1alpha (HIF-1alpha): structural requirement of bisphenol A for degradation of HIF-1alpha

Bisphenol A (BpA), an endocrine-disrupting chemical, is known to be a xenoestrogen and to affect the reproductive functions of animals. Recent reports have documented BpA-induced developmental abnormalities in the neuronal systems of humans and animals, and these effects appear to be non-estrogenic. In this study, we found that BpA inhibited the hypoxic response of human hepatoma cells. The expression of hypoxic response genes such as the erythropoietin (EPO) gene is done via a hypoxia inducible factor 1 (HIF-1)-dependent signaling pathway. To investigate possible structural requirements for this inhibitory effect, several BpA analogs were synthesized and added to this system. The blocking of two phenol groups in BpA did not change the effect, but the inhibition completely disappeared by the removal of two central methyl groups in BpA (the resulting compound is designated BpF). BpA, but not BpF, promoted degradation of the HIF-1alpha protein, which is a component of HIF-1, followed by inhibition of EPO induction. An immunoprecipitation assay indicated that BpA dissociated heat shock protein 90 (Hsp90) from HIF-1alpha and destabilized HIF-1alpha protein. HIF-1alpha is usually degraded first by ubiquitination and then by the proteasome pathway. Cobalt ion inhibits ubiquitination of HIF-1alpha and stabilizes it. In the present study, BpA promoted HIF-1alpha degradation in the presence of cobalt and in the presence of proteasome inhibitor. These results suggest that BpA degraded HIF-1alpha via a currently unknown pathway, and that this phenomenon required two methyl groups in BpA.