Structural features of [NiFeSe] and [NiFe] hydrogenases determining their different properties: a computational approach

Hydrogenases are metalloenzymes that catalyze the reversible reaction \textH₂ \leftrightarrows 2\textH ⁺ + 2\texte ^- {\text{H}}_{2} \leftrightarrows 2{\text{H}}^{ + } + 2{\text{e}}^{ - } , being potentially useful in H₂ production or oxidation. [NiFeSe] hydrogenases are a particularly interesting subgroup of the [NiFe] class that exhibit tolerance to O₂ inhibition and produce more H₂ than standard [NiFe] hydrogenases. However, the molecular determinants responsible for these properties remain unknown. Hydrophobic pathways for H₂ diffusion have been identified in [NiFe] hydrogenases, as have proton transfer pathways, but they have never been studied in [NiFeSe] hydrogenases. Our aim was, for the first time, to characterize the H₂ and proton pathways in a [NiFeSe] hydrogenase and compare them with those in a standard [NiFe] hydrogenase. We performed molecular dynamics simulations of H₂ diffusion in the [NiFeSe] hydrogenase from Desulfomicrobium baculatum and extended previous simulations of the [NiFe] hydrogenase from Desulfovibrio gigas (Teixeira et al. in Biophys J 91:2035–2045, 2006). The comparison showed that H₂ density near the active site is much higher in [NiFeSe] hydrogenase, which appears to have an alternative route for the access of H₂ to the active site. We have also determined a possible proton transfer pathway in the [NiFeSe] hydrogenase from D. baculatum using continuum electrostatics and Monte Carlo simulation and compared it with the proton pathway we found in the [NiFe] hydrogenase from D. gigas (Teixeira et al. in Proteins 70:1010–1022, 2008). The residues constituting both proton transfer pathways are considerably different, although in the same region of the protein. These results support the hypothesis that some of the special properties of [NiFeSe] hydrogenases could be related to differences in the H₂ and proton pathways.     

The mechanism of hydrogen uptake in [NiFe] hydrogenase: first-principles molecular dynamics investigation of a model compound

The recent discovery of a model compounds of [NiFe] hydrogenase that catalyzes the heterolytic cleavage of the H₂ molecule into a proton and a stable hydride in water solution under room conditions opened up the possibility to understand the mechanism of H₂ uptake by this peculiar class of enzymes. The simplest model compound belongs to the class of NiRu bimetallic cationic complexes mimicking, in water solution and at room conditions, the hydrogenase active site. By using first-principles molecular dynamics computer simulations, in the Car–Parrinello scheme, we investigated models including the water solvent and nitrate counterions. Several simulations, starting from different initial configurations, provided information on the first step of the H₂ cleavage: (1) the pathway of H₂ approach towards the active site; (2) the role of the ruthenium-bonded water molecule in providing a base that extracts the proton from the activated H₂ molecule; (3) the minor role of Ni in activating the H₂ molecule and its role in stabilizing the hydride produced.     

A Threonine Stabilizes the NiC and NiR Catalytic Intermediates of [NiFe]-hydrogenase

The heterodimeric [NiFe] hydrogenase from Desulfovibrio fructosovorans catalyzes the reversible oxidation of H₂ into protons and electrons. The catalytic intermediates have been attributed to forms of the active site (NiSI, NiR, and NiC) detected using spectroscopic methods under potentiometric but non-catalytic conditions. Here, we produced variants by replacing the conserved Thr-18 residue in the small subunit with Ser, Val, Gln, Gly, or Asp, and we analyzed the effects of these mutations on the kinetic (H₂ oxidation, H₂ production, and H/D exchange), spectroscopic (IR, EPR), and structural properties of the enzyme. The mutations disrupt the H-bond network in the crystals and have a strong effect on H₂ oxidation and H₂ production turnover rates. However, the absence of correlation between activity and rate of H/D exchange in the series of variants suggests that the alcoholic group of Thr-18 is not necessarily a proton relay. Instead, the correlation between H₂ oxidation and production activity and the detection of the NiC species in reduced samples confirms that NiC is a catalytic intermediate and suggests that Thr-18 is important to stabilize the local protein structure of the active site ensuring fast NiSI-NiC-NiR interconversions during H₂ oxidation/production.     

A proton-deuterium exchange study of three types ofDesulfovibrio hydrogenases

Summary Hydrogenases are among the main enzymes involved in bacterial anaerobic corrosion of metals. The study of their mode of action is important for a full comprehension of this phenomenon. The three types ofDesulfovibrio hydrogenases [(Fe), (NiFe), (NiFeSe)] present different patterns in the pH dependence of their activity. The periplasmic enzyme fromDesulfovibrio salexigens and the cytoplasmic enzyme fromDesulfovibrio baculatus both have pH optima at 7.5 for H₂ uptake and 4.0 for H₂ evolution and H⁺–D₂ exchange reaction (measured by membrane-inlet mass-spectrometry). The H₂ to HD ratio at pH above 5.0 is higher than 1.0. The periplasmic hydrogenase fromD. gigas presents the same pH optimum (8.0) for the H⁺–D₂ exchange as for H₂ consumption. In contrast, the enzyme fromD. vulgaris has the highest activity in H₂ production and in the exchange at pH 5.0. Both hydrogenases have a H₂-to-HD ratio below 1.0.     

The crystal structure of a reduced [NiFeSe] hydrogenase provides an image of the activated catalytic center.

BACKGROUND: [NiFeSe] hydrogenases are metalloenzymes that catalyze the reaction H2<-->2H+ + 2e-. They are generally heterodimeric, contain three iron-sulfur clusters in their small subunit and a nickel-iron-containing active site in their large subunit that includes a selenocysteine (SeCys) ligand. RESULTS: We report here the X-ray structure at 2.15 A resolution of the periplasmic [NiFeSe] hydrogenase from Desulfomicrobium baculatum in its reduced, active form. A comparison of active sites of the oxidized, as-prepared, Desulfovibrio gigas and the reduced D. baculatum hydrogenases shows that in the reduced enzyme the nickel-iron distance is 0.4 A shorter than in the oxidized enzyme. In addition, the putative oxo ligand, detected in the as-prepared D. gigas enzyme, is absent from the D. baculatum hydrogenase. We also observe higher-than-average temperature factors for both the active site nickel-selenocysteine ligand and the neighboring Glu18 residue, suggesting that both these moieties are involved in proton transfer between the active site and the molecular surface. Other differences between [NiFeSe] and [NiFe] hydrogenases are the presence of a third [4Fe4S] cluster replacing the [3Fe4S] cluster found in the D. gigas enzyme, and a putative iron center that substitutes the magnesium ion that has already been described at the C terminus of the large subunit of two [NiFe] hydrogenases. CONCLUSIONS: The heterolytic cleavage of molecular hydrogen seems to be mediated by the nickel center and the selenocysteine residue. Beside modifying the catalytic properties of the enzyme, the selenium ligand might protect the nickel atom from oxidation. We conclude that the putative oxo ligand is a signature of inactive 'unready' [NiFe] hydrogenases.     

Hydrogenases in Desulfovibrio vulgaris Hildenborough: structural and physiologic characterisation of the membrane-bound [NiFeSe] hydrogenase

The genome of Desulfovibrio vulgaris Hildenborough (DvH) encodes for six hydrogenases (Hases), making it an interesting organism to study the role of these proteins in sulphate respiration. In this work we address the role of the [NiFeSe] Hase, found to be the major Hase associated with the cytoplasmic membrane. The purified enzyme displays interesting catalytic properties, such as a very high H₂ production activity, which is dependent on the presence of phospholipids or detergent, and resistance to oxygen inactivation since it is isolated aerobically in a Ni(II) oxidation state. Evidence was obtained that the [NiFeSe] Hase is post-translationally modified to include a hydrophobic group bound to the N-terminal, which is responsible for its membrane association. Cleavage of this group originates a soluble, less active form of the enzyme. Sequence analysis shows that [NiFeSe] Hases from Desulfovibrionacae form a separate family from the [NiFe] enzymes of these organisms, and are more closely related to [NiFe] Hases from more distant bacterial species that have a medial [4Fe4S]^2+/1+ cluster, but not a selenocysteine. The interaction of the [NiFeSe] Hase with periplasmic cytochromes was investigated and is similar to the [NiFe]₁ Hase, with the Type I cytochrome c ₃ as the preferred electron acceptor. A model of the DvH [NiFeSe] Hase was generated based on the structure of the Desulfomicrobium baculatum enzyme. The structures of the two [NiFeSe] Hases are compared with the structures of [NiFe] Hases, to evaluate the consensual structural differences between the two families. Several conserved residues close to the redox centres were identified, which may be relevant to the higher activity displayed by [NiFeSe] Hases. Electronic Supplementary Material Supplementary material is available for this article at     

The nickel site in active Desulfovibrio baculatus [NiFeSe] hydrogenase is diamagnetic. Multifield saturation magnetization measurement of the spin state of Ni(II).

The magnetic properties of the nickel(II) site in active Desulfovibrio baculatus (DSM 1743) [NiFeSe] hydrogenase have been measured using the multifield saturation magnetization technique. The periplasmic [NiFeSe] hydrogenase was isolated from bacteria grown in excess selenium in the presence of 57Fe. Saturation magnetization data were collected at three fixed fields (1.375, 2.75, 5.5 tesla) over the temperature range from 2 to 100 K. M?ssbauer and EPR spectroscopies were used to characterize the magnetic state of the two [4Fe-4S] clusters of the enzyme and to quantitate the small amounts of iron impurities present in the sample. The nickel(II) site was found to be diamagnetic (low spin, S = 0). In combination with recent results from extended x-ray absorption fine structure studies, this magnetic state indicates that the nickel(II) site of active D. baculatus [NiFeSe] hydrogenase is five-coordinate.     

New assay method based on Raman spectroscopy for enzymes reacting with gaseous substrates

Enzyme activity is typically assayed by quantitatively measuring the initial and final concentrations of the substrates and/or products over a defined time period. For enzymatic reactions involving gaseous substrates, the substrate concentrations can be estimated either directly by gas chromatography or mass spectrometry, or indirectly by absorption spectroscopy, if the catalytic reactions involve electron transfer with electron mediators that exhibit redox‐dependent spectral changes. We have developed a new assay system for measuring the time course of enzymatic reactions involving gaseous substrates based on Raman spectroscopy. This system permits continuous monitoring of the gas composition in the reaction cuvette in a non‐invasive manner over a prolonged time period. We have applied this system to the kinetic study of the [NiFe] hydrogenase from Desulfovibrio vulgaris Miyazaki F. This enzyme physiologically catalyzes the reversible oxidation of H₂ and also possesses the nonphysiological functions of H/D exchange and nuclear spin isomer conversion reactions. The proposed system has the additional advantage of enabling us to measure all of the hydrogenase‐mediated reactions simultaneously. Using the proposed system, we confirmed that H₂ (the fully exchanged product) is concomitantly produced alongside HD by the H/D exchange reaction in the D₂/H₂O system. Based on a kinetic model, the ratio of the rate constants of the H/D exchange reaction (k) at the active site and product release rate (k_out) was estimated to be 1.9 ± 0.2. The proposed assay method based on Raman spectroscopy can be applied to the investigation of other enzymes involving gaseous substrates.     

Hydrogenases in sulfate-reducing bacteria function as chromium reductase

The ability of sulfate-reducing bacteria (SRB) to reduce chromate VI has been studied for possible application to the decontamination of polluted environments. Metal reduction can be achieved both chemically, by H₂S produced by the bacteria, and enzymatically, by polyhemic cytochromes c₃. We demonstrate that, in addition to low potential polyheme c-type cytochromes, the ability to reduce chromate is widespread among [Fe], [NiFe], and [NiFeSe] hydrogenases isolated from SRB of the genera Desulfovibrio and Desulfomicrobium. Among them, the [Fe] hydrogenase from Desulfovibrio vulgaris strain Hildenborough reduces Cr(VI) with the highest rate. Both [Fe] and [NiFeSe] enzymes exhibit the same K_m towards Cr(VI), suggesting that Cr(VI) reduction rates are directly correlated with hydrogen consumption rates. Electron paramagnetic resonance spectroscopy enabled us to probe the oxidation by Cr(VI) of the various metal centers in both [NiFe] and [Fe] hydrogenases. These experiments showed that Cr(VI) is reduced to paramagnetic Cr(III), and revealed inhibition of the enzyme at high Cr(VI) concentrations. The significant decrease of both hydrogenase and Cr(VI)-reductase activities in a mutant lacking [Fe] hydrogenase demonstrated the involvement of this enzyme in Cr(VI) reduction in vivo. Experiments with [3Fe-4S] ferredoxin from Desulfovibrio gigas demonstrated that the low redox [Fe-S] (non-heme iron) clusters are involved in the mechanism of metal reduction by hydrogenases.     

The exchange activities of [Fe] hydrogenase (iron–sulfur-cluster-free hydrogenase) from methanogenic archaea in comparison with the exchange activities of [FeFe] and [NiFe] hydrogenases

[Fe] hydrogenase (iron–sulfur-cluster-free hydrogenase) catalyzes the reversible reduction of methenyltetrahydromethanopterin (methenyl-H₄MPT⁺) with H₂ to methylene-H₄MPT, a reaction involved in methanogenesis from H₂ and CO₂ in many methanogenic archaea. The enzyme harbors an iron-containing cofactor, in which a low-spin iron is complexed by a pyridone, two CO and a cysteine sulfur. [Fe] hydrogenase is thus similar to [NiFe] and [FeFe] hydrogenases, in which a low-spin iron carbonyl complex, albeit in a dinuclear metal center, is also involved in H₂ activation. Like the [NiFe] and [FeFe] hydrogenases, [Fe] hydrogenase catalyzes an active exchange of H₂ with protons of water; however, this activity is dependent on the presence of the hydride-accepting methenyl-H₄MPT⁺. In its absence the exchange activity is only 0.01% of that in its presence. The residual activity has been attributed to the presence of traces of methenyl-H₄MPT⁺ in the enzyme preparations, but it could also reflect a weak binding of H₂ to the iron in the absence of methenyl-H₄MPT⁺. To test this we reinvestigated the exchange activity with [Fe] hydrogenase reconstituted from apoprotein heterologously produced in Escherichia coli and highly purified iron-containing cofactor and found that in the absence of added methenyl-H₄MPT⁺ the exchange activity was below the detection limit of the tritium method employed (0.1 nmol min⁻¹ mg⁻¹). The finding reiterates that for H₂ activation by [Fe] hydrogenase the presence of the hydride-accepting methenyl-H₄MPT⁺ is essentially required. This differentiates [Fe] hydrogenase from [FeFe] and [NiFe] hydrogenases, which actively catalyze H₂/H₂O exchange in the absence of exogenous electron acceptors.     

The Three-Dimensional Structure of [NiFeSe] Hydrogenase from Desulfovibrio vulgaris Hildenborough: A Hydrogenase without a Bridging Ligand in the Active Site in Its Oxidised, “as-Isolated” State

Hydrogen is a good energy vector, and its production from renewable sources is a requirement for its widespread use. [NiFeSe] hydrogenases (Hases) are attractive candidates for the biological production of hydrogen because they are capable of high production rates even in the presence of moderate amounts of O₂, lessening the requirements for anaerobic conditions. The three-dimensional structure of the [NiFeSe] Hase from Desulfovibrio vulgaris Hildenborough has been determined in its oxidised “as-isolated” form at 2.04-Å resolution. Remarkably, this is the first structure of an oxidised Hase of the [NiFe] family that does not contain an oxide bridging ligand at the active site. Instead, an extra sulfur atom is observed binding Ni and Se, leading to a SeCys conformation that shields the NiFe site from contact with oxygen. This structure provides several insights that may explain the fast activation and O₂ tolerance of these enzymes.     

The Crystal Structure of the [NiFe] Hydrogenase from the Photosynthetic Bacterium Allochromatium vinosum: Characterization of the Oxidized Enzyme (Ni-A State)

The crystal structure of the membrane-associated [NiFe] hydrogenase from Allochromatium vinosum has been determined to 2.1 Å resolution. Electron paramagnetic resonance (EPR) and Fourier transform infrared spectroscopy on dissolved crystals showed that it is present in the Ni-A state (> 90%). The structure of the A. vinosum [NiFe] hydrogenase shows significant similarities with [NiFe] hydrogenase structures derived from Desulfovibrio species. The amino acid sequence identity is ∼ 50%. The bimetallic [NiFe] active site is located in the large subunit of the heterodimer and possesses three diatomic non-protein ligands coordinated to the Fe (two CN⁻ , one CO). Ni is bound to the protein backbone via four cysteine thiolates; two of them also bridge the two metals. One of the bridging cysteines (Cys64) exhibits a modified thiolate in part of the sample. A mono-oxo bridging ligand was assigned between the metal ions of the catalytic center. This is in contrast to a proposal for Desulfovibrio sp. hydrogenases that show a di-oxo species in this position for the Ni-A state. The additional metal site located in the large subunit appears to be a Mg²⁺ ion. Three iron-sulfur clusters were found in the small subunit that forms the electron transfer chain connecting the catalytic site with the molecular surface. The calculated anomalous Fourier map indicates a distorted proximal iron-sulfur cluster in part of the crystals. This altered proximal cluster is supposed to be paramagnetic and is exchange coupled to the Ni³⁺ ion and the medial [Fe₃S₄]⁺ cluster that are both EPR active (S = 1/2 species). This finding of a modified proximal cluster in the [NiFe] hydrogenase might explain the observation of split EPR signals that are occasionally detected in the oxidized state of membrane-bound [NiFe] hydrogenases as from A. vinosum.     

Characterization of a cyanobacterial-like uptake [NiFe] hydrogenase: EPR and FTIR spectroscopic studies of the enzyme from Acidithiobacillus ferrooxidans

Electron paramagnetic resonance (EPR) and Fourier transform IR studies on the soluble hydrogenase from Acidithiobacillus ferrooxidans are presented. In addition, detailed sequence analyses of the two subunits of the enzyme have been performed. They show that the enzyme belongs to a group of uptake [NiFe] hydrogenases typical for Cyanobacteria. The sequences have also a close relationship to those of the H₂-sensor proteins, but clearly differ from those of standard [NiFe] hydrogenases. It is concluded that the structure of the catalytic centre is similar, but not identical, to that of known [NiFe] hydrogenases. The active site in the majority of oxidized enzyme molecules, 97% in cells and more than 50% in the purified enzyme, is EPR-silent. Upon contact with H₂ these sites remain EPR-silent and show only a limited IR response. Oxidized enzyme molecules with an EPR-detectable active site show a Ni_r*-like EPR signal which is light-sensitive at cryogenic temperatures. This is a novelty in the field of [NiFe] hydrogenases. Reaction with H₂ converts these active sites to the well-known Ni_a-C* state. Illumination below 160 K transforms this state into the Ni_a-L* state. The reversal, in the dark at 200 K, proceeds via an intermediate Ni EPR signal only observed with the H₂-sensor protein from Ralstonia eutropha. The EPR-silent active sites in as-isolated and H₂-treated enzyme are also light-sensitive as observed by IR spectra at cryogenic temperatures. The possible origin of the light sensitivity is discussed. This study represents the first spectral characterization of an enzyme of the group of cyanobacterial uptake hydrogenases. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Atypical effect of temperature tuning on the insertion of the catalytic iron−sulfur center in a recombinant [FeFe]‐hydrogenase

The expression of recombinant [FeFe]‐hydrogenases is an important step for the production of large amount of these enzymes for their exploitation in biotechnology and for the characterization of the protein‐metal cofactor interactions. The correct assembly of the organometallic catalytic site, named H‐cluster, requires a dedicated set of maturases that must be coexpressed in the microbial hosts or used for in vitro assembly of the active enzymes. In this work, the effect of the post‐induction temperature on the recombinant expression of CaHydA [FeFe]‐hydrogenase in E. coli is investigated. The results show a peculiar behavior: the enzyme expression is maximum at lower temperatures (20°C), while the specific activity of the purified CaHydA is higher at higher temperature (30°C), as a consequence of improved protein folding and active site incorporation.     

Distribution of Hydrogenase Genes in Desulfovibrio spp. and Their Use in Identification of Species from the Oil Field Environment

The distribution of genes for [Fe], [NiFe], and [NiFeSe] hydrogenases was determined for 22 Desulfovibrio species. The genes for [NiFe] hydrogenase were present in all species, whereas those for the [Fe] and [NiFeSe] hydrogenases had a more limited distribution. Sulfate-reducing bacteria from 16S rRNA groups other than the genus Desulfovibrio (R. Devereux, M. Delaney, F. Widdel, and D. A. Stahl, J. Bacteriol. 171:6689-6695, 1989) did not react with the [NiFe] hydrogenase gene probe, which could be used to identify different Desulfovibrio species in oil field samples following growth on lactate-sulfate medium.     

Does the environment around the H-cluster allow coordination of the pendant amine to the catalytic iron center in [FeFe] hydrogenases? Answers from theory

[FeFe] hydrogenases are H₂-evolving enzymes that feature a diiron cluster in their active site (the [2Fe]_H cluster). One of the iron atoms has a vacant coordination site that directly interacts with H₂, thus favoring its splitting in cooperation with the secondary amine group of a neighboring, flexible azadithiolate ligand. The vacant site is also the primary target of the inhibitor O₂. The [2Fe]_H cluster can span various redox states. The active-ready form (H_ox) attains the Fe^IIFe^I state. States more oxidized than H_ox were shown to be inactive and/or resistant to O₂. In this work, we used density functional theory to evaluate whether azadithiolate-to-iron coordination is involved in oxidative inhibition and protection against O₂, a hypothesis supported by recent results on biomimetic compounds. Our study shows that Fe–N(azadithiolate) bond formation is favored for an Fe^IIFe^II active-site model which disregards explicit treatment of the surrounding protein matrix, in line with the case of the corresponding Fe^IIFe^II synthetic system. However, the study of density functional theory models with explicit inclusion of the amino acid environment around the [2Fe]_H cluster indicates that the protein matrix prevents the formation of such a bond. Our results suggest that mechanisms other than the binding of the azadithiolate nitrogen protect the active site from oxygen in the so-called H _ox ^inact state.     

High-yield expression of heterologous [FeFe] hydrogenases in Escherichia coli

Background

The realization of hydrogenase-based technologies for renewable H₂ production is presently limited by the need for scalable and high-yielding methods to supply active hydrogenases and their required maturases.

Principal Findings

In this report, we describe an improved Escherichia coli-based expression system capable of producing 8–30 mg of purified, active [FeFe] hydrogenase per liter of culture, volumetric yields at least 10-fold greater than previously reported. Specifically, we overcame two problems associated with other in vivo production methods: low protein yields and ineffective hydrogenase maturation. The addition of glucose to the growth medium enhances anaerobic metabolism and growth during hydrogenase expression, which substantially increases total yields. Also, we combine iron and cysteine supplementation with the use of an E. coli strain upregulated for iron-sulfur cluster protein accumulation. These measures dramatically improve in vivo hydrogenase activation. Two hydrogenases, HydA1 from Chlamydomonas reinhardtii and HydA (CpI) from Clostridium pasteurianum, were produced with this improved system and subsequently purified. Biophysical characterization and FTIR spectroscopic analysis of these enzymes indicate that they harbor the H-cluster and catalyze H₂ evolution with rates comparable to those of enzymes isolated from their respective native organisms.

Significance

The production system we describe will facilitate basic hydrogenase investigations as well as the development of new technologies that utilize these prolific H₂-producing enzymes. These methods can also be extended for producing and studying a variety of oxygen-sensitive iron-sulfur proteins as well as other proteins requiring anoxic environments.     

Hydrogenases for biological hydrogen production

Biological H₂ production offers distinctive advantages for environmental protection over existing physico-chemical methods. This study focuses specifically on hydrogenases, a class of enzymes that serves to effectively catalyze H₂ formation from protons or oxidation to protons. It reviews the classification schemes (i.e. [NiFe]-, [FeFe]-, and [Fe]-hydrogenases) and properties of these enzymes, which are essential to understand the mechanisms for H₂ production, the control of cell metabolism, and subsequent increases in H₂ production. There are five kinds of biological hydrogen production methods, categorized based upon the light energy requirement, and feedstock sources. The genetic engineering work on hydrogenase to enhance H₂ production is reviewed here. Further discussions in this study include nitrogenase, an enzyme that normally catalyzes the reduction of N₂ to ammonia but is also able to produce H₂ under photo-heterotrophic conditions, as well as other applicable fields of hydrogenase other than H₂ production.     

Tyrosine,Cysteine, and S-Adenosyl Methionine Stimulate In Vitro [FeFe] Hydrogenase Activation

Background

[FeFe] hydrogenases are metalloenzymes involved in the anaerobic metabolism of H₂. These proteins are distinguished by an active site cofactor known as the H-cluster. This unique [6Fe–6S] complex contains multiple non-protein moieties and requires several maturation enzymes for its assembly. The pathways and biochemical precursors for H-cluster biosynthesis have yet to be elucidated.

Principal Findings

We report an in vitro maturation system in which, for the first time, chemical additives enhance [FeFe] hydrogenase activation, thus signifying in situ H-cluster biosynthesis. The maturation system is comprised of purified hydrogenase apoprotein; a dialyzed Escherichia coli cell lysate containing heterologous HydE, HydF, and HydG maturases; and exogenous small molecules. Following anaerobic incubation of the Chlamydomonas reinhardtii HydA1 apohydrogenase with S-adenosyl methionine (SAM), cysteine, tyrosine, iron, sulfide, and the non-purified maturases, hydrogenase activity increased 5-fold relative to incubations without the exogenous substrates. No conditions were identified in which addition of guanosine triphosphate (GTP) improved hydrogenase maturation.

Significance

The in vitro system allows for direct investigation of [FeFe] hydrogenase activation. This work also provides a foundation for studying the biosynthetic mechanisms of H-cluster biosynthesis using solely purified enzymes and chemical additives.     

A new mechanistic model for an O2-protected electron-bifurcating hydrogenase,Hnd from Desulfovibrio fructosovorans

The genome of the sulfate-reducing and anaerobic bacterium Desulfovibrio fructosovorans encodes different hydrogenases. Among them is Hnd, a tetrameric cytoplasmic [FeFe] hydrogenase that has previously been described as an NADP-specific enzyme (Malki et al., 1995). In this study, we purified and characterized a recombinant Strep-tagged form of Hnd and demonstrated that it is an electron-bifurcating enzyme. Flavin-based electron-bifurcation is a mechanism that couples an exergonic redox reaction to an endergonic one allowing energy conservation in anaerobic microorganisms. One of the three ferredoxins of the bacterium, that was named FdxB, was also purified and characterized. It contains a low-potential (E_m?=??450?mV) [4Fe4S] cluster. We found that Hnd was not able to reduce NADP⁺, and that it catalyzes the simultaneous reduction of FdxB and NAD⁺. Moreover, Hnd is the first electron-bifurcating hydrogenase that retains activity when purified aerobically due to formation of an inactive state of its catalytic site protecting against O₂ damage (H_inact). Hnd is highly active with the artificial redox partner (methyl viologen) and can perform the electron-bifurcation reaction to oxidize H₂ with a specific activity of 10?μmol of NADH/min/mg of enzyme. Surprisingly, the ratio between NADH and reduced FdxB varies over the reaction with a decreasing amount of FdxB reduced per NADH produced, indicating a more complex mechanism than previously described. We proposed a new mechanistic model in which the ferredoxin is recycled at the hydrogenase catalytic subunit.