Effect of Glutaraldehyde on the Outer Layers of Escherichia coli

S ummary : Sodium lauryl sulphate (SLS) at pH 3 and 8 lysed cell walls of Escherichia coli. Pretreatment with glutaraldehyde at pH 3 and at pH 8 prevented this lysis. SLS induced maximum lysis of E. coli cells at 40°; pretreatment of cells with glutaraldehyde prevented this lysis also. Electrophoretic studies indicated that glutaraldehyde accumu lated on the surface of E. coli cells more rapidly in acid than in alkaline conditions, and that it blocked amino groups on the surface layer of Bacillus subtilis spores. The relationship of these findings to the bactericidal efficiency of glutaraldehyde in acid and alkaline solution is discussed.     

Bacillus subtilis spore coats: complexity and purification of a unique polypeptide component.

Extensively washed, dormant spores of Bacillus subtilis were disrupted with glass beads in buffer at pH 7 in the presence of protease inhibitors. Approximately 31% of the total spore protein was soluble, and another 14% was removed from the insoluble fraction by hydrolysis with lysozyme and washing with 1 M KCl and 0.1% sodium dodecyl sulfate. The residual spore integuments comprised 55% of the total spore proteins and consisted of coats and residual membrane components. Treatment of integuments with sodium dodecyl sulfate and reducing agents at pH 10 solubilized 40% of the total spore protein. Seven low-molecular-weight polypeptide components of this solubilized fraction comprised 27% of the total spore protein. They are not normal membrane components and reassociated to form fibrillar structures resembling spore coat fragments. The residual insoluble material (15% of the total spore protein) was rich in cysteine and was probably also derived from the spore coats. A solubilized coat polypeptide of molecular weight 12,200 has been purified in good yield (4 to 5% of the total spore protein). Five amino acids account for 92% of its total amino acid residues: glycine, 19%; tyrosine, 31%; proline, 23%; arginine, 13%; and phenylalanine, 6%.     

Studies on the Mechanism of the Sporicidal Action of Glutaraldehyde

S ummary . Low concentrations (0.025–0.125%) of glutaraldehyde inhibited or prevented colony formation by Escherichia coli, Bacillus subtilis and B. pumilis in agar, and inhibited germination of spores of the Bacillus spp. in L-alanine plus D-glucose. Higher concentrations (2%) of glutaraldehyde at pH 8.5 were sporicidal. Pre-treatment of spores with glutaraldehyde lessened release of dipicolinic acid when the spores were subsequently heated at 100°, but not at 121°. Spores treated with glutaraldehyde and then with 0.5 M thioglycollic acid in 6 M urea at 70° were less sensitive to lysis by hydrogen peroxide than spores which had not been exposed to glutaraldehyde. Glutaraldehyde was less effective in preventing peroxide induced lysis if added to spores which had been previously exposed to thioglycollic acid plus urea at 70°. The mechanism of the sporicidal activity of glutaraldehyde is discussed in relation to these findings.     

Comparative sporicidal effects of liquid chemical agents.

We compared the effectiveness of glutaraldehyde, formaldehyde, hydrogen peroxide, peracetic acid, cupric ascorbate (plus a sublethal amount of hydrogen peroxide), sodium hypochlorite, and phenol to inactivate Bacillus subtilis spores under various conditions. Each chemical agent was distinctly affected by pH, storage time after activation, dilution, and temperature. Only three of the preparations (hypochlorite, peracetic acid, and cupric ascorbate) studied here inactivated more than 99.9% of the spore load after a 30-min incubation at 20 degrees C at concentrations generally used to decontaminate medical devices. Under similar conditions, glutaraldehyde inactivated approximately 90%, and hydrogen peroxide, formaldehyde, and phenol produced little killing of spores in suspension. By kinetic analysis at different temperatures, we calculated the rate of spore inactivation (k) and the activation energy of spore killing (delta E) for each chemical agent. Rates of spore inactivation had a similar delta E value of approximately 20 kcal/mol (ca.83.68 kJ/mol) for every substance tested. The variation among k values allowed a quantitative comparison of liquid germicidal agents.     

Mechanisms of killing of Bacillus subtilis spores by Decon and Oxone, two general decontaminants for biological agents

AIMS: To determine the mechanisms of Bacillus subtilis spore killing by and resistance to the general biological decontamination agents, Decon and Oxone. METHODS AND RESULTS: Spores of B. subtilis treated with Decon or Oxone did not accumulate DNA damage and were not mutagenized. Spore killing by these agents was increased if spores were decoated. Spores prepared at higher temperatures were more resistant to these agents, consistent with a major role for spore coats in this resistance. Neither Decon nor Oxone released the spore core's depot of dipicolinic acid (DPA), but Decon- and Oxone-treated spores more readily released DPA upon a subsequent normally sublethal heat treatment. Decon- and Oxone-killed spores initiated germination with dodecylamine more rapidly than untreated spores, but could not complete germination triggered by nutrients or Ca(2+)-DPA and did not degrade their peptidoglycan cortex. However, lysozyme treatment did not recover these spores. CONCLUSIONS: Decon and Oxone do not kill B. subtilis spores by DNA damage, and a major factor in spore resistance to these agents is the spore coat. Spore killing by both agents renders spores defective in germination, possibly because of damage to the inner membrane of spore. SIGNIFICANCE AND IMPACT OF STUDY: These results provide information on the mechanisms of the killing of bacterial spores by Decon and Oxone.     

Mechanisms of killing spores of Bacillus subtilis by acid, alkali and ethanol

AIMS: To determine the mechanisms of killing of Bacillus subtilis spores by ethanol or strong acid or alkali. METHODS AND RESULTS: Killing of B. subtilis spores by ethanol or strong acid or alkali was not through DNA damage and the spore coats did not protect spores against these agents. Spores treated with ethanol or acid released their dipicolinic acid (DPA) in parallel with spore killing and the core wet density of ethanol- or acid-killed spores fell to a value close to that for untreated spores lacking DPA. The core regions of spores killed by these two agents were stained by nucleic acid stains that do not penetrate into the core of untreated spores and acid-killed spores appeared to have ruptured. Spores killed by these two agents also did not germinate in nutrient and non-nutrient germinants and were not recovered by lysozyme treatment. Spores killed by alkali did not lose their DPA, did not exhibit a decrease in their core wet density and their cores were not stained by nucleic acid stains. Alkali-killed spores released their DPA upon initiation of spore germination, but did not initiate metabolism and degraded their cortex very poorly. However, spores apparently killed by alkali were recovered by lysozyme treatment. CONCLUSIONS: The data suggest that spore killing by ethanol and strong acid involves the disruption of a spore permeability barrier, while spore killing by strong alkali is due to the inactivation of spore cortex lytic enzymes.SIGNIFICANCE AND IMPACT OF THE STUDY: The results provide further information on the mechanisms of spore killing by various chemicals.     

Mechanism of Nitrite-Induced Germination of Clostridium perfringens Spores

A study has been undertaken to understand the mechanism(s) of the nitrite-induced germination of Clostridium perfringens S40 spores. An increase in germination rates of the spores in response to increasing NaNO2 concentrations was entirely dependent on both pH and temperature of incubation. Low pH and high temperature were effective in accelerating the germination rate, the maximal germination level being reached at pH 4.0 and 60°C in the presence of 0.5 M NaNO₂. On the basis of germination rate, the activation energy (μ) for the nitrite-induced germination calculated was approximately 9.9 kcal/mol. Germination was greatly stimulated after pretreatment of spores with DTT at pH 10.5 to remove the coats. Furthermore, cortical fragments prepared from spores of the same organism were lysed not only by lysozyme but also by NaNO_2. Hexosamine-containing material was also solubilized by these reagents. However, nitrite, unlike lysozyme, released a considerable amount of free hexosamine as well. These results suggest that nitrite-induced germination may involve an interaction of sodium nitrite as nitrous acid with some component of the cortex. A possible mechanism of nitrite-induced germination is discussed.     

Emergence of resistance to glutaraldehyde in spores of Bacillus subtilis 168

Abstract The emergence of resistance to glutaraldehyde in spores of Bacillus subtilis 168 was examined. Resistance to an organic solvent (toluene), heat and lysozyme were included for comparison. A sequential development of resistance was observed, with toluene resistance occuring early on in sporulation (stages III and IV), thermal resistance at early stage V, lysozyme resistance at middle stage V and glutaraldehyde resistance arising late in stage V. Studies with sporulation mutants also indicate that glutaraldehyde resistance is acquired even later than lysozyme resistance and may therefore possibly be considered as a very late marker event for sporulation, characterizing late stages of B. subtilis 168 spore formation.     

Changes in the hydrophobic characteristics of Clostridium perfringens spores and spore coats by heat

The hydrophobic characteristics of Clostridium perfringens NCTC 8679 spores were demonstrated by adherence to toluene in a toluene-aqueous partition system. Spores and spore coat preparations were hydrophobic. Vegetative cells and spores extracted with a dithiothreitol-sodium dodecyl sulfate treatment known to remove spore coats were not hydrophobic. A heat activation treatment (75 degrees C for 20 min) which promotes more rapid spore germination increased the hydrophobicity of intact spores and decreased that of isolated spore coats. The hydrophobic changes were reversed by washing and stabilized by 0.5% glutaraldehyde. Heat-induced hydrophobic changes were observed in spore coats prepared from spores that were preheated and washed before rupturing in a buffer containing glutaraldehyde. These results suggest the occurrence of a heat-induced change in the spore coat (possibly in the conformation of a macromolecule) which was stable only within the architectural confines of the intact spore.     

Molecular characterization of a germination-specific muramidase from Clostridium perfringens S40 spores and nucleotide sequence of the corresponding gene.

The exudate of fully germinated spores of Clostridium perfringens S40 in 0.15 M KCI-50 mM potassium phosphate (pH 7.0) was found to contain another spore-lytic enzyme in addition to the germination-specific amidase previously characterized (S. Miyata, R. Moriyama, N. Miyahara, and S. Makino, Microbiology 141:2643-2650, 1995). The lytic enzyme was purified to homogeneity by anion-exchange chromatography and shown to be a muramidase which requires divalent cations (Ca2+, Mg2+, or Mn2+) for its activity. The enzyme was inactivated by sulfhydryl reagents, and sodium thioglycolate reversed the inactivation by Hg2+. The muramidase hydrolyzed isolated spore cortical fragments from a variety of wild-type organisms but had minimal activity on decoated spores and isolated cell walls. However, the enzyme was not capable of digesting isolated cortical fragments from spores of Bacillus subtilis ADD1, which lacks muramic acid delta-lactam in its cortical peptidoglycan. This indicates that the enzyme recognizes the delta-lactam residue peculiar to spore peptidoglycan, suggesting an involvement of the enzyme in spore germination. Immunochemical studies indicated that the muramidase in its mature form is localized on the exterior of the cortex layer in the dormant spore. A gene encoding the muramidase, sleM, was cloned into Escherichia coli, and the nucleotide sequence was determined. The gene encoded a protein of 321 amino acids with a deduced molecular weight of 36,358. The deduced amino acid sequence of the sleM gene indicated that the enzyme is produced in a mature form. It was suggested that the muramidase belongs to a separate group within the lysozyme family typified by the fungus Chalaropsis lysozyme. A possible mechanism for cortex degradation in C. perfringens S40 spores is discussed.     

Mechanisms of killing of spores of Bacillus subtilis by iodine, glutaraldehyde and nitrous acid

Treatment of wild-type spores of Bacillus subtilis with glutaraldehyde or an iodine-based disinfectant (Betadine) did not cause detectable mutagenesis, and spores (termed alpha-beta-) lacking the major DNA-protective alpha/beta-type, small, acid-soluble proteins (SASP) exhibited similar sensitivity to these agents. A recA mutation did not sensitize wild-type or alpha-beta- spores to Betadine or glutaraldehyde, nor did spore treatment with these agents result in significant expression of a recA-lacZ fusion when the treated spores germinated. Spore glutaraldehyde sensitivity was increased dramatically by removal of much spore coat protein, but this treatment had no effect on Betadine sensitivity. In contrast, nitrous acid treatment of wild-type and alpha-beta- spores caused significant mutagenesis, with alpha-beta- spores being much more sensitive to this agent. A recA mutation further sensitized both wild-type and alpha-beta- spores to nitrous acid, and there was significant expression of a recA-lacZ fusion when nitrous acid-treated spores germinated. These results indicate that: (a) nitrous acid kills B. subtilis spores at least in part by DNA damage, and alpha/beta-type SASP protect against this DNA damage; (b) killing of spores by glutaraldehyde or Betadine is not due to DNA damage; and (c) the spore coat protects spores against killing by glutaraldehyde but not Betadine. Further analysis also demonstrated that spores treated with nitrous acid still germinated normally, while those treated with glutaraldehyde or Betadine did not.     

Proposed mechanism for sensitization by hypochlorite treatment of Clostridium botulinum spores.

Hypochlorite-treated Clostridium botulinum 12885A spores, but not buffer-treated spores, could be germinated with lysozyme, indicating that their coats are made permeable to lysozyme by hypochlorite treatment so that the cortex is accessible. Hypochlorite-treated spores and spores extracted with 8 M urea-2-mercaptoethanol (pH 3.0) were sensitive to certain components of recovery media, but spores sensitized to lysozyme by other treatments were not. These data indicate that hypochlorite does more than increase coat permeability to lysozyme. Scanning electron microscopy revealed a more open-appearing surface of hypochlorite-treated spores, and sodium dodecyl sulfate-polyacrylamide gel electrophoresis indicated that a greater amount of protein was removed from hypochlorite-treated and other lysozyme-sensitized spores than from buffer-treated spores. The data suggest that spore coat proteins may be removed by hypochlorite treatment, and this may be responsible for the sensitivity of spores and for their observed ability to germinate in lysozyme.     

PCR detection of potentially pathogenic aeromonads in raw and cold-smoked freshwater fish

AIMS: To determine the mechanism of killing of spores of Bacillus subtilis by ortho-phthalaldehyde (OPA), an aromatic dialdehyde currently in use as an antimicrobial agent. METHODS AND RESULTS: OPA is sporicidal, although spores are much more OPA resistant than are vegetative cells. Bacillus subtilis mutants deficient in DNA repair, spore DNA protection and spore coat assembly have been used to show that (i) the coat appears to be a major component of spore OPA resistance, which is acquired late in sporulation of B. subtilis at the time of spore coat maturation, and (ii) B. subtilis spores are not killed by OPA through DNA damage but by elimination of spore germination. Furthermore, OPA-treated spores that cannot germinate are not recovered by artificial germinants or by treatment with NaOH or lysozyme. CONCLUSIONS: OPA appears to kill spores by blocking the spore germination process. SIGNIFICANCE AND IMPACT OF THE STUDY: This work provides information on the mechanism of spore resistance to, and spore killing by, the disinfectant, OPA.     

Mechanisms of Bacillus subtilis spore killing by and resistance to an acidic Fe-EDTA-iodide-ethanol formulation

AIMS: To determine the mechanisms of Bacillus subtilis spore killing by and resistance to an acidic solution containing Fe(3+), EDTA, KI and ethanol termed the KMT reagent. METHODS AND RESULTS: Wild-type B. subtilis spores were not mutagenized by the KMT reagent but the wild-type and recA spores were killed at the same rate. Spores (alpha(-)beta(-)) lacking most DNA-protective alpha/beta-type small, acid-soluble spore proteins were less resistant to the KMT reagent than wild-type spores but were also not mutagenized, and alpha(-)beta(-) and alpha(-)beta(-)recA spores exhibited nearly identical resistance. Spore resistance to the KMT reagent was greatly decreased if spores had defective coats. However, the level of unsaturated fatty acids in the inner membrane did not determine spore sensitivity to the KMT reagent. Survivors in spore populations killed by the KMT reagent were sensitized to killing by wet heat or nitrous acid and to high salt in plating medium. KMT reagent-killed spores had not released their dipicolinic acid (DPA), although these killed spores released their DPA more readily when germinated with dodecylamine than did untreated spores. However, KMT reagent-killed spores did not germinate with nutrients or Ca(2+)-DPA and were recovered only poorly by lysozyme treatment in a hypertonic medium. CONCLUSIONS: The KMT reagent does not kill spores by DNA damage and a major factor in spore resistance to this reagent is the spore coat. KMT reagent treatment damages the spore's ability to germinate, perhaps by damaging the spore's inner membrane. However, this damage is not oxidation of unsaturated fatty acids. SIGNIFICANCE AND IMPACT OF THE STUDY: These results provide information on the mechanism of spore resistance to and killing by the KMT reagent developed for killing Bacillus spores.     

Killing of Bacillus subtilis spores by a modified Fenton reagent containing CuCl2 and ascorbic acid

Bacillus subtilis spores were killed by CuCl(2)-ascorbic acid, chloride ions were essential for killing of spores, and spores with defective coats were killed more rapidly. CuCl(2)-ascorbic acid did not damage spore DNA, and spores killed by this reagent initiated germination. However, spores killed by CuCl(2)-ascorbic acid may have damage to their inner membrane.     

Analysis of the killing of spores of Bacillus subtilis by a new disinfectant, Sterilox

AIMS: To determine the mechanism whereby the new disinfectant Sterilox kills spores of Bacillus subtilis. METHODS AND RESULTS: Bacillus subtilis spores were readily killed by Sterilox and spore resistance to this agent was due in large part to the spore coats. Spore killing by Sterilox was not through DNA damage, released essentially no spore dipicolinic acid and Sterilox-killed spores underwent the early steps in spore germination, including dipicolinic acid release, cortex degradation and initiation of metabolism. However, these germinated spores never swelled and many had altered permeability properties. CONCLUSIONS: We suggest that Sterilox treatment kills dormant spores by oxidatively modifying the inner membrane of the spores such that this membrane becomes non-functional in the germinated spore leading to spore death. SIGNIFICANCE AND IMPACT OF THE STUDY: This work provides information on the mechanism of spore resistance to and spore killing by a new disinfectant.     

Revival of Bacillus subtilis spores from biocide-induced injury in the germination process

Spores of Bacillus subtilis NCTC 8236 were treated with glutaraldehyde, Lugol's iodine, polyvinylpyrrolidone-iodine (PVP-I), sodium hypochlorite or sodium dichloroisocyanurate (NaDCC). After exposure survivors were enumerated on nutrient agar containing potential revival agents (subtilisin, lysozyme, calcium dipicolinate, calcium lactate). Of these, only calcium lactate had any significant enhancing effect and then only with iodine-treated spores. Calcium lactate (9 mmol 1⁻¹) in nutrient broth enhanced the rate and extent of germination of iodine-treated spores but not of spores previously subjected to glutaraldehyde, hypochlorite or NaDCC.     

Interaction of Bacillus subtilis spores with sodium hypochlorite, sodium dichloroisocyanurate and chloramine-T

S.F. BLOOMFIELD AND M. ARTHUR. 1992. Solutions of chlorine-releasing agents (CRAs) show varying activity against Bacillus subtilis spores; sodium hypochlorite (NaOCl) shows higher activity than sodium dichloroisocyanurate (NaDCC) which is more active than chloramine-T. Investigations with coat- and cortex-extracted spores indicate that resistance to CRAs depends not only on the spore coat but also the cortex. Whereas extraction of alkali-soluble coat protein increased sensitivity to NaOCl and NaDCC, degradation of coat and cortex material was required to achieve significant activity with chloramine-T. NaOCl (in the presence and absence of NaOH) and NaDCC (in the presence of NaOH only) produced degradation of spore coat and cortes material which may be related to their rapid sporicidal action at low concentrations under these conditions. By contrast, chloramine-T produced no degradation of cortex peptidoglycan and was only effective against normal and alkali-treated spores at high concentrations, requiring extraction of peptidoglycan with urea/dithiothreitol/sodium lauryl sulphate (UDS) or UDS/lysozyme to achieve significant activity at low concentrations. Results suggest that the sporicidal action of CRAs is associated with spore coat and cortex degradation causing rehydration of the protoplast allowing diffusion to the site of action on the underlying protoplast.     

Mutations in the gerP locus of Bacillus subtilis and Bacillus cereus affect access of germinants to their targets in spores

The gerP1 transposon insertion mutation of Bacillus cereus is responsible for a defect in the germination response of spores to both L-alanine and inosine. The mutant is blocked at an early stage, before loss of heat resistance or release of dipicolinate, and the efficiency of colony formation on nutrient agar from spores is reduced fivefold. The protein profiles of alkaline-extracted spore coats and the spore cortex composition are unchanged in the mutant. Permeabilization of gerP mutant spores by coat extraction procedures removes the block in early stages of germination, although a consequence of the permeabilization procedure in both wild type and mutant is that late germination events are not complete. The complete hexacistronic operon that includes the site of insertion has been cloned and sequenced. Four small proteins encoded by the operon (GerPA, GerPD, GerPB, and GerPF) are related in sequence. A homologous operon (yisH-yisC) can be found in the Bacillus subtilis genome sequence; null mutations in yisD and yisF, constructed by integrational inactivation, result in a mutant phenotype similar to that seen in B. cereus, though somewhat less extreme and equally repairable by spore permeabilization. Normal rates of germination, as estimated by loss of heat resistance, are also restored to a gerP mutant by the introduction of a cotE mutation, which renders the spore coats permeable to lysozyme. The B. subtilis operon is expressed solely during sporulation, and is sigma K-inducible. We hypothesize that the GerP proteins are important as morphogenetic or structural components of the Bacillus spore, with a role in the establishment of normal spore coat structure and/or permeability, and that failure to synthesize these proteins during spore formation limits the opportunity for small hydrophilic organic molecules, like alanine or inosine, to gain access to their normal target, the germination receptor, in the spore.     

Development of resistance to biocides during sporulation of Bacillus subtilis

From synchronized sporulation and spore mutant studies, the order of development of resistance to biocides during sporulation of Bacillus subtilis strain 168 was toluene, formaldehyde, sodium lauryl sulphate, phenol, phenylmercuric nitrate, m -cresol, chlorocresol, chlorhexidine gluconate, cetylpyridinium chloride, moist heat, sodium dichlorisocyanurate, sodium hypochlorite, lysozyme and glutaraldehyde. These resistances could be assigned to different stages in spore development.