Unusual structure of the human immunodeficiency virus type 1 trans-activation response element.

The trans-activation response element (TAR) of human immunodeficiency virus type 1 is a structured RNA consisting of the first 60 nucleotides of all human immunodeficiency virus type 1 RNAs. Computer analyses and limited structural analyses indicated that TAR consists of a stem-bulge-loop structure. Mutational analyses showed that sequences in the bulge are required for Tat binding, whereas sequences in both the bulge and the loop are required for trans activation. In this study, we probed the structures of TAR and various mutants of TAR with chemical probes and RNases and used these methods to footprint a Tat peptide on TAR. Our data show that the structure of wild-type TAR is different from previously published models. The bulge, a Tat-binding site, consists of four nucleotides. The loop is structured, rather than simply single stranded, in a fashion reminiscent of the structures of the tetraloop 5'-UUCG-3' and the GNRA loop (C. Cheong, G. Varani, and I. Tinoco, Jr., Nature [London] 346:680-682, 1990; H.A. Heus and A. Pardi, Science 253:191-193, 1991). RNA footprint data indicate that three bases in the bulge are protected and suggest that a conformational change occurs upon Tat binding.     

Simian immunodeficiency virus RNA is efficiently encapsidated by human immunodeficiency virus type 1 particles.

Packaging of retroviral RNA is attained through the specific recognition of a cis-acting encapsidation site (located near the 5' end of the viral RNA) by components of the Gag precursor protein. Human immunodeficiency virus type 1 (HIV-1) and simian immunodeficiency virus (SIV) are two lentiviruses that lack apparent sequence similarity in their putative encapsidation regions. We used SIV vectors to determine whether HIV-1 particles can recognize the SIV encapsidation site and functionally propagate SIV nucleic acid. SIV nucleic acid was replicated by HIV-1 proteins. Thus, efficient lentivirus pseudotyping can take place at the RNA level. Direct examination of the RNA contents of virus particles indicated that encapsidation of this heterologous RNA is efficient. Characterization of deletion mutants in the untranslated leader region of SIV RNA indicates that only a very short region at the 5' end of the SIV RNA is needed for packaging. Comparison of this region with the corresponding region of HIV-1 reveals that both are marked by secondary structures that are likely to be similar. Thus, it is likely that a similar higher-order RNA structure is required for encapsidation.     

Coplanar and coaxial orientations of RNA bases and helices

Electrostatic interactions, base-pairing, and especially base-stacking dominate RNA three-dimensional structures. In an A-form RNA helix, base-stacking results in nearly perfect parallel orientations of all bases in the helix. Interestingly, when an RNA structure containing multiple helices is visualized at the atomic level, it is often possible to find an orientation such that only the edges of most bases are visible. This suggests that a general aspect of higher level RNA structure is a coplanar arrangement of base-normal vectors. We have analyzed all solved RNA crystal structures to determine the degree to which RNA base-normal vectors are globally coplanar. Using a statistical test based on the Watson-Girdle distribution, we determined that 330 out of 331 known RNA structures show statistically significant (p < 0.05; false discovery rate [FDR] = 0.05) coplanar normal vector orientations. Not surprisingly, 94% of the helices in RNA show bipolar arrangements of their base-normal vectors (p < 0.05). This allows us to compute a mean axis for each helix and compare their orientations within an RNA structure. This analysis revealed that 62% (208/331) of the RNA structures exhibit statistically significant coaxial packing of helices (p < 0.05, FDR = 0.08). Further analysis reveals that the bases in hairpin loops and junctions are also generally planar. This work demonstrates coplanar base orientation and coaxial helix packing as an emergent behavior of RNA structure and may be useful as a structural modeling constraint.     

Human immunodeficiency virus rev protein recognizes a target sequence in rev-responsive element RNA within the context of RNA secondary structure.

Human immunodeficiency virus type 1 Rev protein modulates the distribution of viral mRNAs from the nucleus to the cytoplasm by interaction with a highly structured viral RNA sequence, the Rev-responsive element (RRE). To identify the minimal functional elements of RRE, we evaluated mutant RREs for Rev binding in vitro and Rev response in vivo in the context of a Gag expression plasmid. The critical functional elements fold into a structure composed of a stem-loop A, formed by the ends of the RRE, joined to a branched stem-loop B/B1/B2, between bases 49 and 113. The 5' 132 nucleotides of RRE, RREDDE, which possessed a similar structure, bound Rev efficiently but were nonfunctional in vivo, implying separate binding and functional domains within the RRE. Excision of stem-loop A reduced Rev binding significantly and abolished the in vivo Rev response. The B2 branch could be removed without severe impairment of binding, but deletions in the B1 branch significantly reduced binding and function. However, deletion of 12 nucleotides, including the 5' strand of stem B, abolished both binding and function, while excision of the 3' strand of stem B only reduced them. Maintenance of the native RRE secondary structure alone was not sufficient for Rev recognition. Many mutations that altered the primary structure of the critical region while preserving the original RNA conformation were Rev responsive. However, mutations that changed a 5'..CACUAUGGG..3' sequence in the B stem, without affecting the overall structure abolished both in vitro Rev binding and the in vivo Rev response.     

Recognition of the high affinity binding site in rev-response element RNA by the human immunodeficiency virus type-1 rev protein.

The Human Immunodeficiency Virus type-1 rev protein binds with high affinity to a bubble structure located within the rev-response element (RRE) RNA in stemloop II. After this initial interaction, additional rev molecules bind to the RRE RNA in an ordered assembly process which requires a functional bubble structure, since mutations in the bubble sequence that reduce rev affinity block multiple complex formation. We have used synthetic chemistry to characterize the interaction between rev protein and its high affinity binding site. A minimal synthetic duplex RNA (RBC6) carrying the bubble and 12 flanking base pairs is able to bind rev with 1 to 1 stoichiometry and with high affinity. When the bubble structure is inserted into synthetic RNA molecules carrying longer stretches of flanking double-stranded RNA, rev forms additional complexes resembling the multimers observed with the RRE RNA. The ability of rev to bind to RBC6 analogues containing functional group modifications on base and sugar moieties of nucleoside residues was also examined. The results provide strong evidence that the bubble structure contains specific configurations of non-Watson--Crick G:G and G:A base pairs and suggest that high affinity recognition of RRE RNA by rev requires hydrogen bonding to functional groups in the major groove of a distorted RNA structure.     

A human chromosome 12-associated 83-kilodalton cellular protein specifically binds to the loop region of human immunodeficiency virus type 1 trans-activation response element RNA.

trans activation of human immunodeficiency virus type 1 (HIV-1) involves the viral trans-activator protein (Tat) and a cellular factor(s) encoded on human chromosome 12 (HuChr12) that targets the trans-activation response element (TAR) in the viral long terminal repeat. Because nascent TAR RNA is predicted to form a secondary structure that specifically binds cellular proteins, we investigated the composition of the TAR RNA-protein complex for HuChr12-specific proteins. UV cross-linking of TAR RNA-nuclear protein complexes formed in vitro identified an 83-kDa protein in human cells and in a human-hamster hybrid cell containing only HuChr12. The 83-kDa TAR RNA-binding protein was absent in the parental hamster cells. TAR RNA mutations that inhibited binding of the 83-kDa protein in vitro also inhibited HuChr12-dependent Tat trans activation. These TAR mutations changed the native sequence or secondary structure of the TAR loop. The TAR RNA binding activity of the 83-kDa protein also correlated with a HuChr12-dependent increase in steady-state HIV-1 RNA expression during Tat trans activation. Our results suggest that either a species-specific 83-kDa TAR RNA loop-binding protein is directly encoded on HuChr12 or a HuChr12 protein(s) induces the expression of an 83-kDa TAR-binding protein in nonprimate cells.     

Minimal Rev-response element for type 1 human immunodeficiency virus.

Rev protein regulates nuclear export of viral mRNAs that contain a 240-base RNA sequence termed the Rev-response element (RRE). We demonstrate that an 88-base truncated RRE encompassing a known Rev binding site can mediate Rev responsiveness in vivo. Two tandem copies of this mutant function as efficiently as the full-length RRE.     

Requirements for kissing-loop-mediated dimerization of human immunodeficiency virus RNA.

Sequences from the 5' end of type 1 human immunodeficiency virus RNA dimerize spontaneously in vitro in a reaction thought to mimic the initial step of genomic dimerization in vivo. Dimer initiation has been proposed to occur through a "kissing-loop" interaction involving a specific RNA stem-loop element designated SL1: the RNA strands first interact by base pairing through a six-base GC-rich palindrome in the loop of SL1, whose stems then isomerize to form a longer interstrand duplex. We now report a mutational analysis aimed at defining the features of SL1 RNA sequence and secondary structure required for in vitro dimer formation. Our results confirm that mutations which destroy complementarity in the SL1 loop abolish homodimer formation, but that certain complementary loop mutants can heterodimerize. However, complementarity was not sufficient to ensure dimerization, even between GC-rich loops, implying that specific loop sequences may be needed to maintain a conformation that is competent for initial dimer contact; the central GC pair of the loop palindrome appeared critical in this regard, as did two or three A residues which normally flank the palindrome. Neither the four-base bulge normally found in the SL1 stem nor the specific sequence of the stem itself was essential for the interaction; however, the stem structure was required, because interstrand complementarity alone did not support dimer formation. Electron microscopic analysis indicated that the RNA dimers formed in vitro morphologically resembled those isolated previously from retroviral particles. These results fully support the kissing-loop model and may provide a framework for systematically manipulating genomic dimerization in type 1 human immunodeficiency virus virions.     

Inhibition of human immunodeficiency virus type 1 multiplication by antisense and sense RNA expression.

Human immunodeficiency virus type 1 (HIV-1) primarily infects CD4+ lymphocytes and macrophages and causes AIDS in humans. Retroviral vectors allowing neomycin phosphotransferase (npt) gene expression were engineered to express 5' sequences of HIV-1 RNA in the antisense or sense orientation and used to transform the human CD4+ lymphocyte-derived MT4 cell line. Cells expressing antisense or sense RNA to the HIV-1 tat mRNA leader sequence, as part of the 3' untranslated region of the npt mRNA, remained sensitive to HIV-1 infection. In contrast, resistance to HIV-1 infection was observed in cells expressing antisense RNA to the HIV-1 primer-binding site or to the region 5' to the primer-binding site as part of the 3' region of the npt mRNA. Cells expressing the tat mRNA leader sequence in the sense orientation as a precise replacement of the 5' untranslated region of npt mRNA were also resistant to HIV-1. These results indicate that sense and antisense approaches can be used to interfere with HIV-1 multiplication.     

Towards the structure of the human immunodeficiency virus: divide and conquer.

Recent publications have expanded our knowledge of the major structural proteins of the human immunodeficiency virus as isolated proteins. The next challenge lies in understanding the changes in structure and the interactions of these components during assembly and maturation.     

Construction of a replication-competent murine retrovirus vector expressing the human immunodeficiency virus type 1 tat transactivator protein.

A replication-competent Akv murine leukemia virus-based vector encoding the human immunodeficiency virus tat cDNA under control of the simian virus 40 early promoter sequences was constructed. The simian virus 40 tat sequences were placed within the U3 region of the 3' long terminal repeat. The resulting virus, derived by transfection, replicated efficiently in mouse NIH 3T3 cells and maintained the tat cDNA insert. It has been suggested that Tat function requires the presence of a human-specific cofactor, which is absent in murine cells. However, infection of murine cells with the Akv virus encoding tat resulted in significant transactivation of a human immunodeficiency virus long terminal repeat-driven reporter gene, indicating that human cofactors are not always required for Tat function. The vector system described may be useful for introduction of foreign genes in vivo and in whole animals when virus spread is required for efficient infection and levels of gene expression.