Cryopreserved hematopoietic stem/progenitor cells stability program-development,current status and recommendations: A brief report from the AABB-ISCT joint working group cellular therapy product stability project team

BackgroundThe AABB-ISCT Joint Working Group Stability Project Team (SPT) was assigned to roadmap a path toward standardization of cryopreserved hematopoietic stem/progenitor cell (HSPC) stability programs. HSPC stability encompasses a broad scope of conditions including non-frozen (“fresh”) and cryopreserved cell products, and varying methods for storage, thaw, and administration. This report assessed current practices and focused solely on cryopreserved HSPC cell therapy products to establish preliminary recommendations for a stability program roadmap.MethodsA survey was prepared by the SPT and distributed to ISCT and AABB members. Survey results were summarized and recommendations were outlined based on the responses from the survey. This report highlights current practices for cryopreserved HSPC stability programs, including additional considerations and recommendations.Results and DiscussionEighty-two (82) centers worldwide participated in the survey. Survey results indicate variability across programs. HSPC stability depends on multiple factors within the processing facility (e.g., cryopreservation techniques, reagents used, and storage temperature) and independent variables (e.g., donor-related factors and starting material variability). While retention of hematopoietic engraftment potential is the primary goal for cryopreserved HSPC stability, engraftment results should not be used as the sole metric for stability programs. Based on the survey results, the SPT provides recommendations for consideration.ConclusionsThe SPT recommendations for best practices are not intended to replace existing standards. The survey results emphasize the need for the community to optimize best practices and consider initiating collaborative projects to improve the standardization of cryopreserved HSPC stability programs for cell therapy products.     

Effects of long-term cryopreservation on peripheral blood progenitor cells

Background aimsThe long-term stability of cryopreserved peripheral blood progenitor cells is an important issue for patients experiencing disease relapse. However, there is no consensus on how to evaluate the long-term effects of cryopreservation. We describe the effect of cryopreservation on viability and progenitor colony activity from 87 individual samples processed at the Scripps Green Hospital Stem Cell Processing Center (La Jolla, CA, USA).MethodsWe randomly selected 87 peripheral blood hematopoietic stem cell (PBHSC) samples from 60 patients and evaluated the effect of cryopreservation on sample viability and red and white cell colony activity after < 24 h and 7, 10 and 15 years of cryopreservation. Viability was assayed via trypan blue dye exclusion and activity was measured following 14 days of culture.ResultsAn age at collection older than 50 years may result in suboptimal activity and viability following long-term cryopreservation, while gender and disease status had no effect. Cryopreservation did not significantly affect white or red cell activity following 10 years of cryopreservation. However, for samples stored longer than 10 years, viability and activity significantly decreased. We noted a positive association between higher pre-cryopreservation %CD34 count and colony activity.ConclusionsCryopreservation of peripheral blood progenitor cells for up to 10 years results in no loss of clonogenic capacity, as determined by culture activity, although longer durations of storage may affect activity. Until validated methods are developed, cryopreserved grafts should be evaluated based on pre-freeze CD34⁺ cell counts as assayed by flow cytometry, and post-thaw sample evaluation should be reserved for patients identified as poor mobilizers.     

Comparison of regulatory pathways for the approval of advanced therapies in the European Union and the United States

Background aimsRegulatory agencies in the European Union (EU) and in the United States of America (USA) have adapted and launched regulatory pathways to accelerate patient access to innovative therapies, such as advanced therapy medicinal products (ATMPs). The aim of this study is to analyze similarities and differences between regulatory pathways followed by the approved ATMPs in both regions.MethodsA retrospective analysis of the ATMPs approved by EU and US regulatory agencies was carried out until May 31, 2020. Data were collected on the features and timing of orphan drug designation (ODD), scientific advice (SA), expedited program designation (EP), marketing authorization application (MAA) and marketing authorization (MA) for both regions.ResultsIn the EU, a total of fifteen ATMPs were approved (eight gene therapies, three somatic cell therapies, three tissue-engineered products and one combined ATMP), whereas in the USA, a total of nine were approved (five gene therapies and four cell therapies); seven of these were authorized in both regions. No statistical differences were found in the mean time between having the ODD or EP granted and the start of the pivotal clinical trial or MAA in the EU and USA, although the USA required less time for MAA assessment than the EU (mean difference, 5.44, P = 0.012). The MAA assessment was shorter for those products with a PRIME or breakthrough designation.. No differences were found in the percentage of ATMPs with expedited MAA assessment between the EU and the USA (33.3% versus 55.5%, respectively, P = 0.285) or in the time required for the MAA expedited review (mean difference 4.41, P = 0.105). Approximately half of the products in both regions required an Advisory Committee during the MAA review, and 60% required an oral explanation in the EU. More than half of the approved ATMPs (67% and 55.55% in the EU and the USA, respectively) were granted an ODD, 70% by submitting preliminary clinical data in the EU. The mean number of SA and protocol assistance per product conducted by the European Medicines Agency was 1.71 and 3.75, respectively, and only 13% included parallel advice with health technology assessment bodies. A total of 53.33% of the products conducted the first SA after the pivotal clinical study had started, reporting more protocol amendments. Finally, of the seven ATMPs authorized in both regions, the type of MA differed for only two ATMPs (28.6%), and four out of eight products non-commercialized in the USA had a non-standard MA in the EU.ConclusionsThe current approved ATMPs mainly target orphan diseases. Although EU and US regulatory procedures may differ, the main regulatory milestones reached by the approved ATMPs are similar in both regions, with the exception of the time for MAA evaluation, the number of authorized products in the regions and the type of authorization for some products. More global regulatory convergence might further simplify and expedite current ATMP development in these regions.     

Comparison of new Brazilian legislation for the approval of advanced therapy medicinal products with existing systems in the USA,European Union and Japan

Background aimsAdvanced therapy medicinal products (ATMPs) are a class of biological products for human use that are based on genes, cells and tissues. The first ATMP received marketing authorization in Europe in 2009, whereas Brazil granted the first authorization in 2020. The objective of this study was to compare the regulatory models adopted by Brazil, the USA, Japan and the European Union, which comprise the member countries of the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use, with regard to the marketing authorization of ATMPs.MethodsThe authors performed a review of the scientific literature and official documents of the regulatory agencies in the aforementioned countries.ResultsThe legislation and regulatory guidelines adopted by the regulatory agencies exhibit similarities and differences. It was not possible to assess whether these differences can be translated into divergent final recommendations by regulatory authorities upon a request for marketing authorization.ConclusionsIn the future, it will be appropriate to start a progressive process of harmonization between these agencies in terms of terminology, legal recommendations and characterization requirements. This is particularly important for emerging countries such as Brazil. In this sense, some measures can be taken to achieve alignment between regulators.     

Evaluation of the effectiveness of a new cryopreservation system based on a two-compartment vial for the cryopreservation of cell therapy products

Background aimsSuccessful cell cryopreservation and banking remain a major challenge for the manufacture of cell therapy products, particularly in relation to providing a hermetic, sterile cryovial that ensures optimal viability and stability post-thaw while minimizing exposure to toxic cryoprotective agents, typically dimethyl sulfoxide (Me₂SO).MethodsIn the present study, the authors evaluated the effectiveness and functionality of Limbo technology (Cellulis S.L., Santoña, Spain). This system provides a hermetic vial with two compartments (one for adding cells with the cryoprotective agent solution and the other for the diluent solution) and an automated defrosting device. Limbo technology (Cellulis S.L.) allows reduction of the final amount of Me₂SO, sidestepping washing and dilution steps and favoring standardization. The study was performed in several Good Manufacturing Practice laboratories manufacturing diverse cell therapy products (human mesenchymal stromal cells, hematopoietic progenitor cells, leukapheresis products, fibroblasts and induced pluripotent stem cells). Laboratories compared Limbo technology (Cellulis S.L.) with their standard cryopreservation procedure, analyzing cell recovery, viability, phenotype and functionality.ResultsLimbo technology (Cellulis S.L.) maintained the viability and functionality of most of the cell products and preserved sterility while reducing the final concentration of Me₂SO.ConclusionsResults showed that use of Limbo technology (Cellulis S.L.) offers an overall safe alternative for cell banking and direct infusion of cryopreserved cell products into patients.     

Regulation of advanced therapy medicinal products in Europe and the role of academia

Background aimsAdvanced therapy medicinal products (ATMP) are gene therapy, somatic cell therapy or tissue-engineered products regulated under (EC) No. 1394/2007 to ensure their free movement within the European Union while guaranteeing the highest level of health protection for patients. Academic good manufacturing practice (GMP) centers are major contributors in the development of ATMPs and this study assessed the impact of regulations on them.MethodsEuropean academic and non-industrial facilities (n = 747) were contacted, and a representative sample of 50 replied to a detailed questionnaire. Experienced centres were further selected in every Member State (MS) for semi-structured interviews. Indicators of ATMP production and development success were statistically assessed, and opinions about directive implementation were documented.ResultsFacilities experienced in manufacturing cell therapy transplant products are the most successful in developing ATMPs. New centres lacking this background struggle to enter the field, and there remains a shortage of facilities in academia participating in translational research. This is compounded by heterogeneous implementation of the regulations across MS.ConclusionsGMP facilities successfully developing ATMPs are present in all MS. However, the implementation of regulations is heterogeneous between MS, with substantial differences in the definition of ATMPs and in the approved manufacturing environment. The cost of GMP compliance is underestimated by research funding bodies. This is detrimental to development of new ATMPs and commercialization of any that are successful in early clinical trials. Academic GMP practitioners should strengthen their political visibility and contribute to the development of functional and effective European Union legislation in this field.     

Shipping of therapeutic somatic cell products

Background aimsShipment of therapeutic somatic cells between a current good manufacturing practice (cGMP) facility and a clinic or between different cGMP facilities requires validated standard operating procedures (SOP). Under National Heart Lung & Blood Institute (NHLBI) sponsorship, the Production Assistance for Cellular Therapies (PACT) group conducted a validation study for the shipping SOP it has created, including shipments of cryopreserved somatic cells, fresh peripheral blood specimens and apheresis products.MethodsComparisons of pre- and post-shipped cells and cell products at the three participating facilities included measurements of viability, phenotypic profiles and cellular functions. The data were analyzed at the University of Pittsburgh Biostatistics Facility.ResultsNo consistent shipping effects on cell viability, phenotype or functions were detected for cryopreserved and shipped peripheral blood mononuclear cells (PBMC), monocytes, immature dendritic cells (iDC), NK-92 or cytotoxic T cells (CTL). Cryopreserved mesenchymal stromal cells (MSC) had a significantly decreased viability after shipment, but this effect was in part because of inter-laboratory variability in the viable cell counts. Shipments of fresh peripheral blood and apheresis products for the generation of CTL and dendritic cells (DC), respectively, had no significant effects on cell product quality. MSC were successfully generated from fresh bone marrow samples shipped overnight.ConclusionsThis validation study provides a useful set of data for guiding shipments of therapeutic somatic cells in multi-institutional clinical trials.     

Long-term stability of T-cell activation and transduction components critical to the processing of clinical batches of gene-engineered T cells

Background aimsThe generation of gene-modified T cells for clinical adoptive T-cell therapy is challenged by the potential instability and concomitant high financial costs of critical T-cell activation and transduction components. As part of a clinical trial to treat patients with metastatic renal cell cancer with autologous T cells engineered with a chimeric antigen receptor (CAR) recognizing carboxy-anhydrase-IX (CAIX), we evaluated functional stability of the retroviral vector, T-cell activation agent Orthoclone OKT3 (Janssen-Cilag, Beerse, Belgium) monoclonal antibody (mAb) and the transduction promoting agent RetroNectin (Takara, Otsu, Japan).MethodsCarboxy-anhydrase-IX chimeric antigen receptor retrovirus-containing culture supernatants (RTVsups) were generated from two packaging cell lines, Phoenix-Ampho (BioReliance, Sterling, UK) and PG13, and stored at ?80°C over 10 years and 14 years. For Orthoclone OKT3 and RetroNectin, aliquots for single use were prepared and stored at ?80°C. Transduction efficiencies of both batches of RTVsups were analyzed using the same lots of cryopreserved donor peripheral blood mononuclear cells, Orthoclone OKT3 and RetroNectin over time.ResultsWe revisit here an earlier report on the long-term functional stability of the RTVsup, observed to be 9 years, and demonstrate that this stability is at least 14 years. Also, we now demonstrate that Orthoclone OKT3 and RetroNectin are functionally stable for periods of at least 6 years and 10 years.ConclusionsHigh-cost critical components for adoptive T-cell therapy can be preserved for ≥10 years when prepared in aliquots for single use and stored at ?80°C. These findings may significantly facilitate, and decrease the financial risks of, clinical application of gene-modified T cells in multicenter studies.     

Validation of a flow cytometry-based method to quantify viable lymphocyte subtypes in fresh and cryopreserved hematopoietic cellular products

Background aimsAdoptive cellular therapy with immune effector cells (IECs) has shown promising efficacy against some neoplastic diseases as well as potential in immune regulation. Both inherent variability in starting material and variations in cell composition produced by the manufacturing process must be thoroughly evaluated with a validated method established to quantify viable lymphocyte subtypes. Currently, commercialized immunophenotyping methods determine cell viability with significant errors in thawed products since they do not include any viability staining. We hereby report on the validation of a flow cytometry-based method for quantifying viable lymphocyte immunophenotypes in fresh and cryopreserved hematopoietic cellular products.MethodsUsing fresh or frozen cellular products and stabilized blood, we report on the validation parameters accuracy, uncertainty, precision, sensitivity, robustness and contamination between samples for quantification of viable CD3+, CD4+ T cells, CD8+ T cells, CD3–CD56+CD16+/– NK cells, CD19+ B cells and CD14+ monocytes of relevance to fresh and cryopreserved hematopoietic cellular products using the Cytomics FC500 cytometer (Beckman Coulter).ResultsThe acceptance criteria set in the validation plan were all met. The method is able to accommodate the variability in absolute numbers of cells in starting materials collected or cryopreserved from patients or healthy donors (uncertainty of ≤20% at three different concentrations), stability over time (compliance over 3 years during regular inter-laboratory comparisons) and confidence in meaningful changes during cell processing and manufacturing (intra-assay and intermediate precision of 10% coefficient of variation). Furthermore, the method can accurately report on the efficacy of cell depletion since the lower limit of quantification was established (CD3+, CD4+ and CD8+ cells at 9, 8 and 8 cells/µL, respectively). The method complies with Foundation for the Accreditation of Cellular Therapy (FACT) standards for IEC, FACT-Joint Accreditation Committee of ISCT-EBMT (JACIE) hematopoietic cell therapy standards, International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use Q2(R1) and International Organization for Standardization 15189 standards. Furthermore, it complies with Ligand Binding Assay Bioanalytical Focus Group/American Association of Pharmaceutical Scientists, International Council for Standardization of Hematology/International Clinical Cytometry Society and European Bioanalysis Forum recommendations for validating such methods.ConclusionsThe implications of this effort include standardization of viable cell immunophenotyping of starting material for cell manufacturing, cell selection and in-process quality controls or dosing of IECs. This method also complies with all relevant standards, particularly FACT-JACIE standards, in terms of enumerating and reporting on the viability of the “clinically relevant cell populations.”     

Differential effects of polymers PVP90 and Ficoll400 on storage stability and viability of Lactobacillus coryniformis Si3 freeze‐dried in sucrose

Aims: To investigate the effect of freeze‐dried Lactobacillus coryniformis Si3 on storage stability by adding polymers to sucrose‐based formulations and to examine the relationship between amorphous matrix stability and cell viability. Methods and Results: The resistance to moisture‐induced sucrose crystallization and effects on the glass transition temperature (T_g) by the addition of polymers to the formulation were determined by different calorimetric techniques. Both polymers increased the amorphous matrix stability compared to the control, and poly(vinyl)pyrrolidone K90 was more effective in increasing amorphous stability than Ficoll 400. The viability of Lact. coryniformis Si3 after storage was investigated by plate counts following exposure to different moisture levels and temperatures for up to 3 months. The polymers enhanced the cellular viability to different degrees, dependent upon polymer and storage condition. Conclusions: Polymers can be used to enhance the stability of freeze‐dried Lact. coryniformis Si3 products, but cell viability and matrix stability do not always correlate. The general rule of thumb to keep a highly amorphous product 50° below its T_g for overall stability seemed to apply for this type of bacterial products. We showed that by combining thermal analysis with plate counts, it was possible to determine storage conditions where cell viability and matrix stability were kept high. Significance and Impact of the Study: The results will aid in the rational formulation design and proper determination of storage conditions for freeze‐dried and highly amorphous lactic acid bacteria formulations. We propose a hypothesis of reason for different stabilizing effects on the cells by the different polymers based on our findings and previous findings.     

Recommendations for procurement of starting materials by apheresis for advanced therapy medicinal products

Activities involved in the production of certain advanced therapy medicinal products (ATMPs) require standardized approaches to mononuclear cell procurement to ensure the highest product quality, safety and process efficiency. These aims must be achieved while meeting regulatory and accreditation requirements for the procurement of mononuclear cells as starting materials. Mononuclear cells constitute the starting materials for many ATMPs, and this article sets out recommendations for procurement by clinical apheresis, addressing the variation among existing working practices and different manufacturers’ requirements that currently poses a challenge when managing multiple different protocols.     

Decisional tool for cost of goods analysis of bioartificial liver devices for routine clinical use

Background aimsBioartificial liver devices (BALs) are categorized as advanced therapy medicinal products (ATMPs) with the potential to provide temporary liver support for liver failure patients. However, to meet commercial demands, next-generation BAL manufacturing processes need to be designed that are scalable and financially feasible. The authors describe the development and application of a process economics decisional tool to determine the cost of goods (COG) of alternative BAL process flowsheets across a range of industrial scales.MethodsThe decisional tool comprised an information database linked to a process economics engine, with equipment sizing, resource consumption, capital investment and COG calculations for the whole bioprocess, from cell expansion and encapsulation to fluidized bed bioreactor (FBB) culture to cryopreservation and cryorecovery. Four different flowsheet configurations were evaluated across demands, with cell factories or microcarriers in suspension culture for the cell expansion step and single-use or stainless steel technology for the FBB culture step.ResultsThe tool outputs demonstrated that the lowest COG was achieved with microcarriers and stainless steel technology independent of the annual demand (1500–30 000 BALs/year). The analysis identified the key cost drivers were parameters impacting the medium volume and cost.ConclusionsThe tool outputs can be used to identify cost-effective and scalable bioprocesses early in the development process and minimize the risk of failing to meet commercial demands due to technology choices. The tool predictions serve as a useful benchmark for manufacturing ATMPs.     

Study of a new device for washing and concentrating cryopreserved hematopoietic stem cells and mononuclear cells: a single center experience

Background aimsCryopreserved cellular products, as parts of hematopoietic progenitor cell (HPC) transplants, mononuclear cell reinjections for donor lymphocyte infusion or extracorporeal photopheresis, can be washed before being reinjected into the patient or infused directly, depending on local practices. The aim of washing is to reduce the incidence and severity of adverse reactions (ARs) due to the dimethyl sulfoxide (DMSO) used as a cryoprotective agent and other factors, such as dead cell debris. At the authors’ cell therapy laboratory (CTL) in Poitiers, France, as in 76% of Etablissement Français du Sang (EFS) CTLs, all cryopreserved products undergo thawing in a water bath followed by washing with the COBE 2991. As this device will soon cease to be available, an alternative process needs to be assessed.MethodsThe authors compared two closed systems: the authors’ semi-automatic system using the traditional centrifugation method (COBE 2991) and an automated device using spinning membrane filtration (Lovo). A total of 72 HPC bags available for research were used. The authors first performed a paired comparison, processing one or two HPC bags washed by each device. A second study was carried out to compare two different washing solutions generally used by EFS CTLs along with variable storage conditions. Finally, the authors studied the efficiency of the Lovo with three or four thawed bags. The main parameters studied were viable CD34+ cell recovery and viability, CD3+ cell recovery, stability up to 6 h after washing, DMSO elimination and center feasibility.ResultsThe Lovo device showed better CD34+ cell recovery compared with the COBE 2991 while maintaining CD34+ viability and stability over 6 h. Moreover, Lovo efficiency seemed to be independent of the number of thawed bags processed and washing solution used in the authors’ study. CD3+ cell recovery met the authors’ internal specifications (cell recovery >50%), with similar results seen when processing with either the COBE 2991 or Lovo. Additionally, on average, 97% of DMSO was removed after washing with Lovo, minimizing the risk of ARs. The storage conditions post-processing indicated preferred storage conditions of 7 ± 3°C. Finally, if processing time seemed shorter using COBE 2991 for one bag washed, the Lovo device required only one staff member regardless of the number of HPC bags processed.ConclusionsThe Lovo device seems to provide an opportunity to standardize HPC processing, ensuring patient safety, with, on average, 97% of DMSO removed, while improving recovery of cells of interest and maintaining viability over time in case of delayed transplant. The Lovo device consequently seems to be a serious alternative to the COBE 2991.     

Meeting the COVID challenge: Optimizing vCD34+ in cryopreserved HPC samples for implementation of an external QA Program

BackgroundThe COVID-19 pandemic has forced a fundamental change in the global procurement of allogeneic hematopoietic progenitor cells (HPCs) for transplantation. To better meet the emergent challenges of transporting cryopreserved allogeneic HPC during pandemics, there is an urgent need for External Quality Assurance (EQA) programs to evaluate reproducibility and harmonization of viable CD34⁺ cell (vCD34⁺) HPC enumeration, as the current EQA programs are unsuitable for analysis of vCD34⁺. The cost-effective distribution of HPC cryopreserved reference samples (CRSs) with acceptable reproducibility and specificity is key to the success of a vCD34⁺ EQA program.MethodsCryopreserved HPC samples (n = 11) were either stored on dry ice for 1 to 4 days or for 1 day followed by liquid nitrogen (LN) storage for 1 to 3 days to assess optimal conditions for vCD34⁺ EQA. Flow cytometric enumeration of vCD34⁺ HPCs was performed using a single platform assay combined with 7-AAD viability dye exclusion. The optimum transportation condition was validated in pilot and multicenter national studies (n = 12).ResultsA combination of 1 day on dry ice followed by LN storage stabilized viability compared with continuous storage on dry ice. This study demonstrates that dispatch of CRSs on dry ice to recipient centers across a distance of ≤4000 km within 26 h, followed by LN storage, resulted in reproducible intercenter vCD34⁺ enumeration. The estimated cost of safer and more convenient dry ice delivery is >20-fold lower than that of LN.ConclusionThis approach can form the basis for economically and scientifically acceptable distribution of CRSs for external vCD34⁺ EQA.     

Stability of biocontrol products carrying Candida sake CPA-1 in starch derivatives as a function of water activity

The preservation and shelf-life of formulations of the biocontrol agent Candida sake CPA-1 and starch derivatives as a function of water activity (a_W) were studied in terms of the physical stability of the products and cell viability. Formulations of biocontrol products (BCPs), based on combinations of potato starch and pre-gelatinised potato starch (F1 and F2) or maltodextrines (MD) (F3) containing cell protectants, were obtained by fluidised-bed drying. The carriers and the formulated products were stored at 20°C under different a_W conditions. The water sorption and water plasticization behaviour of the different products were analysed through the water sorption isotherms and glass transition temperatures (T_g). Likewise, the viability of C. sake over time was determined as a function of the a_W. The solubility of the products was also assessed. Although formulations stored at 20°C and low a_W (≤?0.33) exhibited a better shelf-life, a significant decrease in cell survival ratio after 180 storage days was observed. Cold storage (5°C) was required to better maintain the cell viability, thus prolonging the shelf-life of BCPs. Formulations containing MD were the most effective at preserving cell viability and also exhibited the highest water solubility. All the formulations were physically stable at ambient temperature; therefore, the cell stability is the critical point at which to establish both the a_W levels and temperature during storage. Packaging the product using high water vapour barrier material and under cold storage would be necessary to ensure a high number of viable cells and an effective and competitive BCP.     

Long-term effects of cryopreservation on clinically prepared hematopoietic progenitor cell products

Background aimsThe question of how long hematopoietic progenitor cells (HPCs) destined for clinical applications withstand long-term cryopreservation remains unanswered. To increase our basic understanding about the stability of HPC products over time, this study focused on characterizing long-term effects of cryopreservation on clinically prepared HPC products.MethodsCryovials (n = 233) frozen for an average of 6.3 ± 14.2 years (range, 0.003–14.6 years) from HPC products (n = 170) representing 75 individual patients were thawed and evaluated for total nucleated cells (TNCs), cell viability, viable CD34+ (vCD34+) cells and colony-forming cells (CFCs). TNCs were determined by use of an automated cell counter, and cell viability was measured with the use of trypan blue exclusion. Viable CD34 analysis was performed by means of flow cytometry and function by a CFC assay.ResultsSignificant losses in TNCs, cell viability, vCD34+ cells and CFC occurred on cryopreservation. However, once frozen, viable TNCs, vCD34+ cells and CFC recoveries did not significantly change over time. The only parameter demonstrating a change over time was cell viability, which decreased as the length of time that an HPC product was stored frozen increased. A significant negative correlation (correlation coefficient = −0.165) was determined between pre-freeze percent granulocyte content and post-thaw percent viability (n = 170; P = 0.032). However, a significant positive correlation was observed between percent viability at thaw and pre-freeze lymphocyte concentration.ConclusionsOnce frozen, HPC products were stable for up to 14.6 years at <−150°C. Post-thaw viability was found to correlate negatively with pre-freeze granulocyte content and positively with pre-freeze lymphocyte content.     

Cryopreservation of Chlamydomonas reinhardtii: A cause of low viability at high cell density

Cryopreservation is a practical method for stabilizing the genetic content of living algae over long periods of time. Yet, Chlamydomonas reinhardtii, the algal species most often utilized in studies requiring genetically defined strains, is difficult to cryopreserve with a consistently high post-thaw viability. Work described here demonstrates that C. reinhardtii retains high viability only when cryopreserved at a low cell density. Low viability at high cell density was caused by the release of an injurious substance into the culture medium. Rapid freezing and thawing under non-cryoprotective conditions released large amounts of the injurious substance. Heat denaturation of cells prevented the release of the injurious substance, but heating did not inactivate it after it was released. Even when concentrated, the injurious substance was non-toxic to cells under normal culture conditions. Reduced viability of cells cryopreserved in the presence of the injurious substance could not be attributed to changes in the tonicity of the medium. A mutant strain of C. reinhardtii (cw10) with a greatly diminished cell wall did not release a substance that reduced the post-thaw viability of wild-type or cw10 cryopreserved cells. Cryopreservation of cw10 cells was achieved with approximately the same post-thaw viability irrespective to the cell concentration at the time of freezing. Acid treatment of the injurious substance was able to partially diminish its injurious effect on cells during cryopreservation. We propose that diminished viability of C. reinhardtii cells cryopreserved at high cell densities is caused by the enzymatic release of a cell-wall component.     

Non-cryopreserved hematopoietic stem cells in autograft patients with lymphoma: a matched-pair analysis comparing a single center experience with the use of cryopreserved stem cells reported to the European Society for Blood and Marrow Transplantation registry

Background aimsAround 50 000 autologous stem cell transplantations are done each year worldwide using cryopreserved peripheral blood stem cells (PBSCs). Cryopreservation is time-consuming and expensive. Since 2007, several retrospective studies have shown that PBSCs can be stored at 4°C for 2–3 days, allowing autologous stem cell transplantation in patients with multiple myeloma receiving high-dose melphalan. Data with non-cryopreserved PBSCs in patients autografted for lymphoma following longer pre-conditioning regimens are limited. In addition, no controlled comparison has been able to detect unforeseen differences.MethodsThe authors compared outcomes of 94 consecutive adult patients with lymphoma (66 with Hodgkin lymphoma) autografted in our department in Oran (Algeria) using PBSCs stored at 4°C, from 2009 to 2018, with patients receiving cryopreserved stem cells reported to the European Society for Blood and Marrow Transplantation registry. Patients autografted in Oran were matched with patients receiving cryopreserved PBSCs in the registry (four controls per patient in Oran).ResultsNeutrophil engraftment was significantly faster with cryopreserved PBSCs (P = 0.003). By day 10, only 17% of patients receiving non-cryopreserved PBSCs engrafted versus 48% for cryopreserved PBSCs. Likewise, platelet recovery to 20 000/mm³ was significantly faster in patients receiving cryopreserved PBSCs (P = 0.01). However, all patients in both groups had recovered by day 20. There were no significant differences in non-relapse mortality (9% versus 7%, P = 0.4), relapse incidence (22% versus 32%, P = 0.13), progression-free survival (70% versus 61%, P = 0.4) or overall survival (85% versus 75%, P = 0.3).ConclusionsThis analysis suggests that, in patients with lymphoma receiving pre-transplant regimens such as carmustine, etoposide, cytarabine and melphalan, PBSCs stored at 4°C for up to 6 days can be used safely in centers with no cryopreservation facility. However, the kinetics of hematopoietic recovery showed a significant, albeit small, delay in engraftment for both neutrophils and platelets, which favors the use of cryopreservation if available.     

Cryopreservation of hematopoietic cells using a pre-constituted,protein-free cryopreservative solution with 5% dimethyl sulfoxide

Background aimsAdequate cryopreservation techniques are critical to ensure optimal recovery of functional progenitor cells in hematopoietic cell (HC) transplantation, minimize risk of contamination and prevent infusion-related adverse events (irAEs). In this article, we provide graft function and infusion safety results observed by decreasing the concentration of dimethyl sulfoxide (DMSO) in cryopreservative media and by minimizing processor-dependent formulation.MethodsTen HC products, collected after standard mobilization of multiple myeloma patients, were cryopreserved with PRIME-XV FreezIS (FreezIS) and compared with products previously cryopreserved with media formulated in-house to achieve a final DMSO concentration of 10% (Std10) and 5% (Std5). At infusion, HCs were analyzed for recovery of CD34+ cells and viability; irAEs and time to engraftment of neutrophils and platelets were also monitored.ResultsMedian CD34+ cell recovery for HC cryopreserved with Std10, Std5 and FreezIS was 38%, 78% and 68%, respectively (P = 0.0002). There were less frequent irAEs with Std5 and FreezIS (10%) compared with Std10 (80%) (P ≤ 0.0001). Median time to neutrophil engraftment was comparable (11 days) for all three groups, while platelet engraftment occurred at a median of 20, 19 and 17 days, respectively (p-values not significant).ConclusionsFreezIS, a Good Manufacturing Practice-grade, pre-constituted cryopreservative with low DMSO content, maintains functional viability of the HC product while reducing the incidence of irAEs compared with 10% DMSO solutions. The pre-constituted nature of this agent also decreases processor-dependent handling, hence decreasing the risk of variability and infection.