Membrane topology and assembly of the outer membrane protein OmpA of Escherichia coli K12

The 325-residue outer membrane protein OmpA of Escherichia coli has been proposed to consist of a membrane-embedded moiety (residues 1 to about 170) and a C-terminal periplasmic region. The former is thought to comprise eight transmembrane segments in the form of antiparallel -strands, forming an amphiphilic connected by exposed turns. Several questions concerning this model were addressed. Thus no experimental evidence had been presented for the turns at the inner leaflet of the membrane and it was not known whether or not the periplasmic part of the polypeptide plays a role in the process of membrane incorporation. Oligonucleotides encoding trypsin cleavage sites were inserted at the predicted turn sites of the ompA gene and it was shown that the encoded proteins indeed become accessible to trypsin at the modified sites. Together with previous results, these data also show that the turns on both sides of the membrane do not possess specifically topogenic information. In two cases one of the two expected tryptic fragments was lost and could be detected at low concentration in only one case. Therefore, bilateral proteolytic digestion of outer membranes can cause loss of -strands and does not necessarily produce a reliable picture of protein topology. When ompA genes were constructed coding for proteins ending at residue 228 or 274, the membrane assembly of these proteins was shown to be partially defective with about 20% of the proteins not being assembled. No such defect was observed when, following the introduction of a premature stop codon, a truncated protein was produced ending with residue 171. It is concluded that (1) the proposed -barrel structure is essentially correct and (2) the periplasmic part of OmpA does not play an active role in, but can, when present in mutant form, interfere with membrane assembly.     

Properties of γ-aminobutyraldehyde dehydrogenase from Escherichia coli

γ-Aminobutyraldehyde dehydrogenase from Escherichia coli K-12 has been purified and characterized from cell mutants able to grow in putrescine as the sole carbon and nitrogen source. The enzyme has an M_r of 195 000±10 000 in its dimeric form with an M_r of 95 000±1000 for each subunit, a pH optimum at 5.4 in sodium citrate buffer, and does not require bivalent cations for its activity. K_m values are 31.3±6.8 μM and 53.8±7.4 μM for Δ-1-pyrroline and NAD⁺, respectively. An inhibitory capacity for NADH is also shown using the purified enzyme.     

Highly sensitive amperometric immunosensor for the detection of Escherichia coli

With the aim of detecting rapidly the presence of Escherichia coli (E. coli), a disposable amperometric immunosensor was developed based on a double layered configuration at the transducer surface, consisting first of a polypyrrole-NH₂-anti-E. coli antibody (PAE) inner layer followed by an alginate-polypyrrole (Alg-Ppy) outer packing layer. In the presence of the substrate p-aminophenyl β-d-galactopyranoside (PAPG), the bacterial enzyme, β-d-galactosidase produces the p-aminophenol (PAP) product, also generating an amperometric signal due to PAP electrooxidation by potentiostating the glassy carbon (GC) electrode at 0.22 V. The operational procedure consists in first adding the test sample containing the bacteria, then coating it with Alg-Ppy to ensure the confinement of the released enzyme and the analyte (being generated by the enzymatic catalysis) to the electrode active surface. This procedure facilitates the diffusion of the substrate within the complex and thus creates a higher oxidation level of the PAP enabling a detection limit of 10 colony forming units (CFU)/ml. The immunosensor setup demonstrates an improved detection limit of more than 10 times less bacteria detected than other immunosensing techniques without the need for multi step pretreatments of the test sample and/or incubation as found in some of the existing methods.     

High-level expression of soluble human β-defensin-2 in Escherichia coli

Human β-defensin-2 (hBD2) is a short cationic peptide with a broad antimicrobial spectrum. The coding sequence of hBD2 was cloned into pET-32a (+) to construct a fusion expression plasmid, pET32–hBD2, which was transformed into E. coli BL21 (DE3) for expression. The cultivation parameters of the expression vector harboring strain were optimized to produce the fusion protein in soluble form efficiently and to avoid the formation of insoluble inclusion bodies. The optimal conditions were determined as following: cultivation at 28 °C in MBL medium, induction at middle stage of exponential growth with 0.8 mM IPTG, and post-induction expression for 8 h. Under the above conditions, a high percentage of the target fusion protein (≥92.3%) was expressed in soluble form and the volumetric productivity of soluble fusion protein reached 1.3 g/l. The culture process was successfully scaled up in a 10 l bench-top fermentor.     

Translocation of colicin E1 through cytoplasmic membrane of Escherichia coli

The product of the malE—lacZ gene fusion was reported to compete with some proteins including outer membrane lipoprotein in the protein translocation across the Echerichia coli membrane. The fusion product also inhibited colicin E1 export. Furthermore, globomycin, which accumulated prolipoprotein in the membrane, inhibited the translocation of colicin E1 in the wild-type cells, but not in lipoprotein-negative mutant cells. Since colicin E1 contains the internal signal-like sequence [Proc. Natl. Acad. Sci. USA (1982) 79, 2827–2831], these results suggest that colicin E1 is exported by the aid of this sequence at a common site for maltose-binding protein and lipoprotein translocation.     

Structure prediction and fold recognition for the ferrochelatase family of proteins

An α/β barrel is predicted for the three-dimensional (3D) structure of Bacillus subtilis ferrochelatase. To arrive at this structure, the THREADER program was used to find possible homologous 3D structures and to predict the secondary structure for the ferrochelatase sequence. The secondary structure was fit by hand to the selected homologous 3D structure then the MODELLER program was used to predict the fold of ferrochelatase. Molecular biological information about the conserved residues of ferrochelatase was used as the criteria to help select the homologous 3D structure used to predict the fold of ferrochelatase. Based on the predicted structure possible, ligands binding to the iron and protoporphyrin IX are discussed. The structure has been deposited in the Brookhaven database as ID 1FJI. © 1997 Wiley-Liss Inc.     

Cloning and sequencing of the HU-2 gene of Escherichia coli

Summary The Escherichia coli HU-2 gene was cloned using a DNA fragment from the HU-1 gene as a probe. The amino acid sequence of the HU-2 protein deduced from the nucleotide sequence is in good agreement with the published sequence. The nucleotide sequence has a possible promoter and a typical ribosomal binding site upstream of the translation initiation codon (AUG) and a possible rhoindependent terminater site downstream of the termination codon (UAA) of the gene.     

Mutational specificity of thymine deprivation-induced mutation in the lacI gene of Escherichia coli

LacI⁻ mutants obtained following 2 and 6 h of thymine deprivation were cloned and sequenced. The mutational spectra recovered were dissimilar. After 2 h of starvation the majority of mutations were base substitutions, largely G: C→C: G transversions. Frameshift mutations but not deletions were observed. In contrast, following 6 h of starvation, with the exception of the G: C→C: G transversion, all possible base substitutions were recovered. Moreover, several deletions but no frameshift events were observed. The differences in the mutational spectra recovered after two periods of thymine deprivation highlight the role of altered nucleotide pools and the potential influence of DNA replication mechanisms.     

Functional expression of N-terminal truncated α-subunits of Na,K-ATPase in Xenopus laevis oocytes

N-terminal deletion mutants of Na,K-ATPase α₁ isoforms initiating translation at Met³⁴ (α₁T₁) or at Met⁴³ (α₁T₂) were expressed in X. laevis oocytes. Compared to β₃ cRNA injected controls, the co-expression of α₁wt, α₁T₁, α₁T₂ with β₃ subunits results in a 2- to 3-fold increase of ouabain binding sites, parallelled by a concomitant increase in Na,K-pump current. The apparent K for potassium activation of the α₁T₂/β₃ Na,K-pumps is significantly higher than that of the α₁wt/β₃ or α₁T₁/β₃ Na,K-pumps expressed at the cell surface. Total deletion of the lysine-rich N-terminal domain thus allows the expression of active Na,K-pump but with distinct cation transport properties.     

Expression in Escherichia coli and Simple Purification of Human Fhit Protein

The fragile histidine triad (Fhit) protein is a homodimeric protein with diadenosine 5′,5-P¹,P³-triphosphate (Ap₃A) asymmetrical hydrolase activity. We have cloned the human cDNA Fhit in the pPROEX-1 vector and expressed with high yield in Escherichia coli with the sequence Met-Gly-His₆-Asp-Tyr-Asp-Ile-Pro-Thr-Thr followed by a rTEV protease cleavage site, denoted as “H6TV,” fused to the N-terminus of Fhit. Expression of H6TV–Fhit in BL21(DE3) cells for 3 h at 37°C produced 30 mg of H6TV–Fhit from 1 L of cell culture (4 g of cells). The H6TV–Fhit protein was purified to homogeneity in a single step, with a yield of 80%, using nickel-nitrilotriacetate resin and imidazole buffer as eluting agent. Incubation of H6TV–Fhit with rTEV protease at 4°C for 24 h resulted in complete cleavage of the H6TV peptide. There were no unspecific cleavage products. The purified Fhit protein could be stored for 3 weeks at 4°C without loss of activity. The pure protein was stable at −20°C for at least 18 months when stored in buffer containing 25% glycerol. Purified Fhit was highly active, with a K_m value for Ap₃A of 0.9 μM and a k_cat(monomer) value of 7.2 ± 1.6 s⁻¹ (n = 5). The catalytic properties of unconjugated Fhit protein and the H6TV–Fhit fusion protein were essentially identical. This indicates that the 24-amino-acid peptide containing the six histidines fused to the N-terminus of Fhit does not interfere in forming the active homodimers or in the binding of Ap₃A.     

A novel approach to predicting protein structural classes in a (20–1)-D amino acid composition space

The development of prediction methods based on statistical theory generally consists of two parts: one is focused on the exploration of new algorithms, and the other on the improvement of a training database. The current study is devoted to improving the prediction of protein structural classes from both of the two aspects. To explore a new algorithm, a method has been developed that makes allowance for taking into account the coupling effect among different amino acid components of a protein by a covariance matrix. To improve the training database, the selection of proteins is carried out so that they have (1) as many non-homologous structures as possible, and (2) a good quality of structure. Thus, 129 representative proteins are selected. They are classified into 30 α, 30 β, 30 α + β, 30 α/β, and 9 ζ (irregular) proteins according to a new criterion that better reflects the feature of the structural classes concerned. The average accuracy of prediction by the current method for the 4 × 30 regular proteins is 99.2%, and that for 64 independent testing proteins not included in the training database is 95.3%. To further validate its efficiency, a jackknife analysis has been performed for the current method as well as the previous ones, and the results are also much in favor of the current method. To complete the mathematical basis, a theorem is presented and proved in Appendix A that is instructive for understanding the novel method at a deeper level. © 1995 Wiley-Liss, Inc.     

15β-hydroxysteroids (Part IV). Steroids of the human perinatal period: The synthesis of 3α,15β,17α-trihydroxy-5α-pregnan-20-one and its A/B-ring configurational isomers

In recent years several 15β-hydroxysteroids have emerged pathognomonic of adrenal disorders in human neonates of which 3α,15β,17α-trihydroxy-5β-pregnan-20-one (2) was the first to be identified in the urine of newborn infants affected with congenital adrenal hyperplasia. In this investigation we report the synthesis of the three remaining 3ξ,5ξ-isomers, namely 3α,15β,17α-trihydroxy-5α-pregnan-20-one (3), 3β,15β,17α-trihydroxy-5α-pregnan-20-one (7) and 3β,15β,17α-trihydroxy-5β-pregnan-20-one (8) for their definitive identification in pathological conditions in human neonates. 3β,15β-Diacetoxy-17α-hydroxy-5-pregnen-20-one (11), a product of chemical synthesis was converted to the isomeric 3 and 7, while conversion of 15β,17α-dihydroxy-4-pregnen-3,20-dione (4), a product of microbiological transformation, resulted in the preparation of 8. In brief, selective acetate hydrolysis of 11 gave 15β-acetoxy-3β,17α-dihydroxy-5-pregnen-20-one (12) which on catalytic hydrogenation gave 15β-acetoxy-3β,17α-dihydroxy-5α-pregnan-20-one (13) a common intermediate for the synthesis of the 3β(and α),5α-isomers. Hydrolysis of the 15β-acetate gave 7, whereas oxidation with pyridinium chlorochromate gave 15β-acetoxy-17α-hydroxy-5α-pregnan-3,20-dione (14) which on reduction with -Selectride and hydrolysis of the 15β-acetate gave 3. Finally, hydrogenation of 4 gave 15β,17α-dihydroxy-5β-pregnan-3,20-dione (10) which on reduction with -Selectride gave 8.     

Membrane topology of the cyanobacterial bicarbonate transporter,SbtA, and identification of potential regulatory loops

Abstract

The transporter SbtA is a high affinity Na⁺-dependent HCO₃ ^- uptake system present in a majority of cyanobacterial clades. It functions in conjunction with CO₂ uptake systems and other HCO₃ ^- uptake systems to allow cyanobacteria to accumulate high levels of HCO₃ ^- used to support efficient photosynthetic CO₂ fixation via the CO₂ concentrating mechanism in these species. The phoA/lacZ fusion reporter method was used to determine the membrane topology of the cyanobacterial bicarbonate transporter, SbtA (predicted size of ～ 39.7 kD), cloned from the freshwater strain, Synechocystis PCC6803. The structure conforms to a model featuring 10 transmembrane helices (TMHs), with a distinct 5 + 5 duplicated structure. Both the N- and C-terminus are outside the cell and the second half of the protein is inverted relative to the first. The first putative helix appears to lack sufficient topogenic signals for its correct orientation in the membrane and instead relies on the presence of later helices. The cytoplasmic loop between helices 5 and 6 is a likely location for regulatory mechanisms that could govern activation of the transporter, and the cytoplasmic loop between helices 9 and 10 also contains some conserved putative regulatory residues.     

Cloning and expression of a collagen-analog-encoding synthetic gene in Escherichia coli

A family of totally synthetic genes coding for multiple tandem repeats of the amino acid sequence (Gly-Pro-Pro) has been prepared and inserted into the ClaI cloning site of the expression vector pJL6. A representative recombinant plasmid, pAC1, with an insert of about 340 bp was established in an Escherichia coli strain bearing a defective λ prophage, to study expression of the CII-collagen analog fusion protein produced from pAC1 upon heat induction. Authentic fusion protein production was demonstrated by nucleotide sequencing, Northern-blot analysis, and in vivo synthesis. Conversion of a wild-type rpoH allele to the rpoH165 mutation was shown to suppress proteolysis of the unstable fusion protein.     

Limonoids from Khaya ivorensis

Four limonoids, 1-O-deacetyl-6-deoxykhayanolide E (1), 1-O-deacetyl-2α-hydroxykhayanolide E (2), 3-acetyl-khayalactone (3), 11α-acetoxy-2α-hydroxy-6-deoxy-destigloylswietenine acetate (4), along with 12 known limonoids, were isolated from the stems of Khaya ivorensis. Their structures were elucidated on the basis of spectroscopic analysis.