Co-polymerization of MTPC (methylene tri p-cresol) and m-cresol using CiP (Coprinus cinereus peroxidase) to improve the dissolution characteristics of the enzyme-catalyzed polymer

MTPC (Methylene tri p-cresol) and m-cresol were copolymerized by Coprinus cinereus peroxidase in aqueous acetone. Although MTPC did not dissolve completely in the aqueous acetone, copolymerization was achieved owing to the radical transfer between solute and solid surface. Various polymerized products with different molecular weights and hydroxyl values were synthesized depending upon reaction compositions (ratio of MTPC to m-cresol and buffer to acetone). Poly(MTPC–m-cresol), a copolymer of MTPC and m-cresol, was mixed with a diazonaphthoquinone derivative to form a new type of photoresist, a thin film of which was formed on a silicon wafer and immersed in alkaline solution (tetramethylammonium hydroxide) to measure speed of dissolution. Poly(MTPC–m-cresol), with higher hydroxyl value (over 80%), showed remarkably improved dissolution characteristics (dark loss in alkaline solution decreased by almost half), which is prerequisite for sensitive photoresist polymer.     

Silk fibroin model,poly(l-alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-seryglycine)

l-Alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-serylglycine and its pentachlorophenyl ester methanesulphonate have been synthesized as monomers for the preparation of silk fibroin model polypeptide. The former octapeptide was polymerized with diphenylphosphorylazide (DPPA) and triethylamine in DMSO or in HMPA—pyridine, and the latter octapeptide pentachlorophenylester was polymerized by adding triethylamine in DMSO to give poly(l-alanylglycyl-l-alanylglycyl-l-alanylglycyl-l-serylglycine). This sequential polypeptide gave a similar i.r. pattern to the crystalline part of Bombyx mori silk fibroin, which indicated antiparallel β-conformation. Dialysis of the solution of this polymer in 60%, aqueous LiBr against water gave mainly the polymer of α-form. O.r.d. measurements suggest that this polypeptide exists as a random structure in dichloroacetic acid on in 60% aqueous LiBr.     

Enzymatic epimerization of d-erythro-dihydroneopterin triphosphate to l-threo-dihydroneopterin triphosphate

An enzyme has been discovered in Escherichia coli that catalyzes the conversion of the triphosphate ester of 2-amino-4-hydroxy-6-(d-erythro-1′,2′,3′-trihydroxypropyl)-7,8-dihydropteridine, (i.e. d-erythro-dihydroneopterin triphosphate) to an epimer of this compound, l-threo-dihydroneopterin triphophate. The enzyme, which is here named “d-erythro-dihydroneopterin triphosphate 2′-epimerase,” needs a divalent cation (Mg²⁺ or Mn²⁺ is most effective) for maximal activity. Its molecular weight is estimated at 87 000–89 000. Little or no activity can be detected if either the monophosphate or the phosphate-free form of the substrate is incubated with the enzyme. Evidence is presented to establish that all three phosphate residues of the substrate are retained in the product and that the product is of the l-threo configuration.     

Photolysis of d-fructose in aqueous solution

In the 254-nm photolysis of aqueous solutions of d-fructose, only the openchain form, which is present to an extent of 0.8% in equilibrium with the cyclic forms, absorbs the light. A study of the products and their quantum yields reveals that the main, primary process is C--- bond cleavage α to the carbonyl group. In the absence of oxygen, the subsequent reactions of the resulting radicals are (a) loss of CO from the hydroxyalkylacyl radicals (estimated rate constant a 3 × 10⁶ s⁻¹); (b) consecutive elimination of two molecules of water from the tetritol radicals; and (c) disproportionation and combination reactions. A peculiar products is trans-4-hydroxy-2-butenal, whose precursor is formed from the tetritol radical through elimination of two molecules of water. This compound is a good radical-scavenger and during photolysis quickly attains a low steady-state concentration. One of the products derived from it is a 2,3-dideoxy-2,3-di-C-hydroxymethyltetrose. In the presence of oxygen, the CO elimination process is partly, and the water elimination reactions are fully, suppressed by the fast addition of oxygen to the acylalkyl and hydroxyalkyl radicals. The peroxyl radicals react through unimolecular elimination of HO₂ from α-hydroxyalkylperoxyl radicals and bimolecular dismutation with loss of O₂, accompanied by loss of CO₂ when hydroxyalkylacylperoxyl radicals are involved.     

Growth of Rhodopseudomonas capsulata on l- and d-malic acid

d-malate replaced l-malate in supporting both photosynthetic (anaerobic, light) and heterotrophic (aerobic, dark) growth of Rhodopseudomonas capsulata. Growth rates and cell yields were nearly equivalent with both enantiomorphs. Addition of glucose to malate culture media increased the growth rate and doubled the cell yield of heterotrophic cultures, but had little effect on photosynthetic cultures. Aerobically-grown cells showed a higher level of substrate-dependent oxygen uptake with l-malate than with d-malate. This preference for l-malate occured even in cells grown on d-malate. No malic racemase activity was detected in extracts of heterotrophically- or photosynthetically-grown cells.     

Isomerization of d-fructose by base: Liquid-chromatographic evaluation and the isolation of d-psicose

Several bases have been evaluated as catalysts for the production of d-psicose (d-ribo-2-hexulose) from d-fructose. The hexose levels in the isomerized mixtures were quantified by l.c. on a μBondapak/Carbohydrate column. The most effective and convenient base was found to be pyridine, and mixtures produced by boiling concentrated solutions (1 g/mL) of d-fructose in pyridine under reflux contained 12.4% of psicose, lesser proportions of glucose and mannose, and 25.8% of the starting material. Following removal of solvent, fermentation with bakers' yeast removed most hexoses other than d-psicose, which was isolated by chromatography on cellulose. The entire procedure required three days, and d-psicose was obtained in gram quantities in 6.8% of the theoretical yield.     

Construction and co-expression of polycistronic plasmid encoding d-hydantoinase and d-carbamoylase for the production of d-amino acids

d-Hydantoinase and d-carbamoylase genes from Agrobacterium radiobacter TH572 were cloned by polymerase chain reaction (PCR). The plasmid pUCCH3 with a polycistronic structure that is controlled by the native hydantoinase promoter was constructed to co-express the two genes and transformed into Escherichia coli strain JM105. To obtain the highest level of expression of the d-carbamoylase and avoid intermediate accumulation, the d-carbamoylase gene was cloned closer to the promoter and the RBS region in the upstream of it was optimized. This resulted in high active expression of soluble d-hydantoinase and d-carbamoylase that is obtained without any inducer. Thus, by the constitutive recombinant JM105/pUCCH3, d-p-hydroxyphenylglycine (d-HPG) was obtained directly with 95.2% production yield and 96.3% conversion yield.     

l-Xylose and l-lyxose production from xylitol using Alcaligenes 701B strain and immobilized l-rhamnose isomerase enzyme

Xylitol was used as a raw material for production of l-xylose and l-lyxose using Alcaligenes 701B strain and immobilized l-rhamnose isomerase enzyme. Alcaligenes 701B converted xylitol to l-xylulose with a yield of 34% in the bioreactor. l-Xylulose was converted to l-xylose and l-lyxose using immobilized l-rhamnose isomerase enzyme. The final equilibrium between l-xylulose, l-xylose and l-lyxose was 53:26:21. The enzyme assays indicated that Alcaligenes 701B strain has an NAD-dependent xylitol dehydrogenase enzyme responsible for l-xylulose production. Furthermore, NAD(P)H-dependent l-xylulose reductase enzyme was active during conversion of xylitol to l-xylulose. The highest l-xylulose production rate corresponded with the highest growth rate. The Alcaligenes 701B strain used d-xylose for biomass growth, but xylitol was used only for l-xylulose production during conversion phase.     

d-Glucose- and d-mannose-based antimetabolites. Part 2. Facile synthesis of 2-deoxy-2-halo-d-glucoses and -d-mannoses

Modified d-glucose and d-mannose analogs are potentially clinically useful metabolic inhibitors. Biological evaluation of 2-deoxy-2-halo analogs has been impaired by limited availability and lack of efficient methods for their preparation. We have developed practical synthetic approaches to 2-deoxy-2-fluoro-, 2-chloro-2-deoxy-, 2-bromo-2-deoxy-, and 2-deoxy-2-iodo derivatives of d-glucose and d-mannose that exploit electrophilic addition reactions to a commercially available 3,4,6-tri-O-acetyl-d-glucal.     

Reconstitution mechanism of nucleosome core particles mediated by poly(l-glutamic acid)

Poly(l-glutamic acid) has been reported to mediate in vitro nucleosome assembly (Stein, A., Whitlock, J.P., Jr. and Bina, M. (1979) Proc. Natl. Acad. Sci. U.S.A. 76, 5000–5004). To study the reaction mechanism, we have reconstituted nucleosome core particles from chicken erythrocyte core DNA and core histones in the presence of poly(l-glutamic acid) and analyzed the assembly products by polyacrylamide gel electrophoresis. Poly(l-glutamic acid), which binds and forms a large complex with core histones, is replaced with core DNA in the reconstitution process. When histone-poly(l-glutamic acid) complex and core DNA are mixed with a histone:DNA ratio of 1.0, the yield of core particles increases by prolonged reconstitution time. Two phases with a distinct time range appear in the process. In the fast phase within 30 min, 60% of the DNA is involved in products containing histones: reconstituted core particles, a larger nucleoprotein complex and aggregation. In the second phase, the remaining DNA and the DNA in the aggregation decrease, and the core particles increase slowly. The yield of core particles is approx. 60% after 24 h. The slow phase is not observed by reconstitution with a histone:DNA ratio of 2.0 in the initial mixture. The reaction scheme of the assembly process derived from these data is given. Based on the in vitro reaction scheme, the possible role of in vivo ‘nucleosome assembly factors’ is also discussed.     

Efficient synthesis of d-xylo and d-ribo-phytosphingosines from methyl 2-amino-2-deoxy-β-d-hexopyranosides

A general and flexible synthetic approach to biologically important 5,6-unsaturated C₁₈-phytosphingosines was developed via olefin cross-metathesis employing truncated C₆-phytosphingosines as the key intermediates. These were efficiently prepared in high yields by zinc-mediated reductive opening of methyl 2-amino-2-deoxy-β-hexopyranosides.

Full-size image (6K)

     

Synthesis and antitumor activity of new d-seco and d-homo androstane derivatives

Starting from 3β-hydroxy-17-oxo-16,17-secoandrost-5-ene-16-nitrile (1), the new 16,17-secoandrostane derivatives 4–9 were synthesized. On the other hand, 3β-hydroxy-17-oxa-d-homoandrost-5-ene-16-one (10) yielded the new d-homo derivatives 12, 13 and 15. In vitro antiproliferative activity of selected compounds against three tumor cell lines (human breast adenocarcinoma ER+, MCF-7, human breast adenocarcinoma ER−, MDA-MB-231, prostate cancer AR−, PC-3, and normal fetal lung fibroblasts, MRC-5) was evaluated. Compounds 3 and 12 showed strong antiproliferative activity against PC-3 cells, the IC₅₀ values being 2 μM and 0.55 μM, respectively. Compounds 6 (10 μM) and 14 (9 μM) showed moderate activity against MDA-MB-231 cells. The synthesized compounds 1–3, 5–8, 10 and 12–15 were not toxic to normal fetal lung fibroblasts cells, MRC-5.     

Immobilization of d-hydantoinase in polyaniline

Polyaniline (PANI) is a water-insoluble polymer that has been used as support for enzyme immobilization due to its desirable characteristics, such as ease of preparation, high synthesis yield, high stability to temperature and pH, and resistance to microbial attack. In this work an investigation was carried out to determine the best conditions to immobilize d-hydantoinase (E.C. 3.5.2.2) in this support. As result, a simple and fast methodology for d-hydantoinase immobilization in PANI is described. 100% of proteins were immobilized on the support in concentrations up to 2 mg solid/ml. Higher concentrations led to a lower protein percentage immobilized. After five reaction cycles about a half of d-hydantoinase initial activity was conserved.     

Development of an interference-free biosensor for l-glutamate using a bienzyme salicylate hydroxylase/l-glutamate dehydrogenase system

An amperometric biosensor was developed for the interference-free determination of l-glutamate with a bienzyme-based Clark electrode. This sensor is based on the specific dehydrogenation by l-glutamate dehydrogenase (GLDH, EC 1.4.1.3) in combination with salicylate hydroxylase (SHL, EC 1.14.13.1). The enzymes were entrapped by a poly(carbamoyl) sulfonate (PCS) hydrogel on a Teflon membrane. The principle of the determination scheme is as follows: the specific detecting enzyme, GLDH, catalyses the specific dehydrogenation of l-glutamate consuming NAD⁺. The product, NADH, initiates the irreversible decarboxylation and the hydroxylation of salicylate by SHL in the presence of oxygen. This results in a detectable signal due to the SHL-enzymatic consumptions of dissolved oxygen in the measurement of l-glutamate. The sensor has a fast steady-state measuring time of 20 s with a quick response (1 s) and a short recovery (1 min). It shows a linear detection range between 10 μM and 1.5 mM l-glutamate with a detection limit of 3.0 μM. A Teflon membrane, which is used to fabricate the sensor, makes the determination to avoid interferences from other amino acids and electroactive substances.     

Overproduction of d-xylose isomerase in Escherichia coli by cloning the d-xylose isomerase gene

The Escherichia coli d-xylose isomerase (d-xylose ketol-isomerase, EC 5.3.1.5) gene, xylA, has been cloned on various E. coli plasmids. However, it has been found that high levels of overproduction of the d-xylose isomerase, the protein product of the xylA gene, cannot be accomplished by cloning the intact gene on high copy-number plasmids alone. This is believed to be due to the fact that the expression of the gene through its natural promoter is highly regulated in E. coli. In order to overcome this, the xylA structural gene has been fused with other strong promoters such as tac and lac, resulting in the construction of a number of fused genes. Analysis of the E. coli transformants containing the fused genes, cloned on high copy-number plasmids, indicated that a 20-fold overproduction of the enzyme can now be obtained. It is expected that overproduction of the enzyme in E. coli can still be substantially improved through additional manipulation with recombinant DNA techniques.     

Single-crystal and powder X-ray diffraction and solid-state C NMR of p-nitrophenyl glycopyranosides, the derivatives of d-galactose, d-glucose, and d-mannose

The X-ray diffraction patterns, ¹³C CP MAS NMR spectra, and powder X-ray diffraction analyses were obtained for selected p-nitrophenyl glycosides: α- and β-d-galactopyranosides (1 and 2), α- and β-d-glucopyranosides (3 and 4), and α- and β-d-mannopyranosides (5 and 6). In X-ray diffraction analysis of 1 and 2, characteristic shortening and lengthening of selected bonds were observed in the molecules of 1 due to anomeric effect, and in the crystal lattice of 1 and 2, hydrogen bonds of complex network were detected. In the crystal asymmetric unit of 1 there were two independent molecules, whereas in 2 there was one molecule. For 1 and 3–6 the number of resonances in solid-state ¹³C NMR spectra exceeded the number of the carbon atoms in the molecules, while for 2 there were distinct singlet resonances in its solid-state NMR spectrum. Furthermore, the powder X-ray diffraction (PXRD) performed for 1–3 and 5 revealed that 1, 3, and 5 existed as single polymorphs proving that the doublets observed in appropriate solid-state NMR spectra were connected with two non-equivalent molecules in the crystal asymmetric unit. On the other hand 2 existed as a mixture of two polymorphs, one of them was almost in agreement with the calculated pattern obtained from XRD (the difference in volumes of the unit cells), and the subsequent unknown polymorph existed in small amounts and therefore it was not observed in solid-state NMR measurements.     

Modification of optimal pH in l-arabinose isomerase from Geobacillus stearothermophilus for d-galactose isomerization

l-Arabinose isomerase from Geobacillus stearothermophilus (GSAI; EC 5.3.1.4) has been genetically evolved to increase the reaction rate toward d-galactose, which is not a natural substrate. To change the optimal pH of GSAI for d-galactose isomerization (pH optimum at 8.5), we investigated the single point mutations influencing the activity based on the sequences of the previously evolved enzymes. Among the seven point mutations found in the evolved enzymes, mutations at Val⁴⁰⁸ and Asn⁴⁷⁵ were determined to be highly influential mutation points for d-galactose isomerization activity. A random mutation was introduced into sites Val⁴⁰⁸ and Asn⁴⁷⁵ (X408V and X475N), and candidates were screened based on non-optimal pH conditions. Among the mutations of X408V and X475N, mutations of Q408V and R408V were selected. The optimal pH of the both mutations Q408V and R408V was shifted to pH 7.5. At the shifted optimal pH, the d-galactose isomerization activities of Q408V and R408V were 60 and 30% higher than that of the wild type at pH 8.5, respectively.     

Hydroxylation of l-proline to cis-3-hydroxy-l-proline by recombinant Escherichia coli expressing a synthetic l-proline-3-hydroxylase gene

A synthetic gene encoding a Streptomyces l-proline-3-hydroxylase was constructed and used to produce the hydroxylase protein in recombinant Escherichia coli. A fermentation process for growth of this recombinant E. coli for enzyme production was scaled-up to 250 L. A biotransformation process was developed using cell suspensions of the recombinant E. coli and subsequently scaled-up to 10 L for conversion of l-proline to cis-3-hydroxy-l-proline. A reaction yield of 85 M% and d.e. of 99.9% was obtained for cis-3-hydroxy-l-proline.     

CNDO/2 calculations of the relative stability of poly (l-proline I) and poly (l-proline II)

The CNDO/2 method using the tight binding approximation for polymers was applied to poly(l-proline I) and poly(l-proline II). The calculations were also carried out for poly(l-alanines) and model molecules which have the same backbone geometrics as those of poly(l-prolines). The results obtained show that both forms of poly(l-proline I) and poly(l-proline II) have nearly the same energy in agreement with experimental results. From the analysis of the total energy, it was found that the intrasegment energy of poly(l-proline II) was lower than that of poly(l-proline I) while the intersegment energy of poly(l-proline I) was lower than that of poly(l-proline II). This result can be considered to correspond well with the experimental fact that poly(l-proline II) is more stable in good or polar solvents and poly(l-proline I) in poor or non-polar solvents. The analysis of the total energy of poly(l-proline) leads us to the conclusion that the α and β carbons play an important role in determining the relative stability between poly(l-proline I) and poly(l-proline II) and the γ carbon does hvae a marked effect on the electronic structures of the polymers in question. This conclusion was also confirmed by comparison of the electronic structures of poly(l-prolines) with those of poly(l-alanines) and model compounds concerned.     

Determination of two neuropeptide growth factor antagonists, [d-Arg,d-Phe,d-Trp,Leu]-substance P and [Arg, d-Trp,N-MePhe]-substance P(6–11), by high-performance liquid chromatography with electrochemical detection

n-MePhe⁸]-substance P(6–11) (G) are currently undergoing preclinical evaluation as potential anticancer agents and clinical trials are planned for G in the near future. A reversed-phase high-performance liquid chromatographic separation has been developed which is both sensitive (limit of detection 250 pg/263 fmol for G; 500 pg/330 fmol for D) and selective, based on electrochemical detection of the two tryptophan residues present in each peptide. Two ion-pairing agents were included in the isocratic mobile phase to eliminate adsorption of the peptides onto the analytical column. Extensive sample clean-up procedures have been developed for plasma, tissue and tumour based on solid-phase extraction. Precision and accuracy of each assay was 91.3 ± 16.9% (between-day) for G and 99.3 ± 16.9% (between-day) for D. The assays were able to detect the intact peptides and a number of their metabolites in plasma, liver and the WX 322 SCLC human xenograft in nude mice for at least 6 hr after administration of therapeutic and pharmacological doses.