Stabilisation of the Fc fragment of human IgG1 by engineered intradomain disulfide bonds

We report the stabilization of the human IgG1 Fc fragment by engineered intradomain disulfide bonds. One of these bonds, which connects the N-terminus of the CH3 domain with the F-strand, led to an increase of the melting temperature of this domain by 10°C as compared to the CH3 domain in the context of the wild-type Fc region. Another engineered disulfide bond, which connects the BC loop of the CH3 domain with the D-strand, resulted in an increase of T(m) of 5°C. Combined in one molecule, both intradomain disulfide bonds led to an increase of the T(m) of about 15°C. All of these mutations had no impact on the thermal stability of the CH2 domain. Importantly, the binding of neonatal Fc receptor was also not influenced by the mutations. Overall, the stabilized CH3 domains described in this report provide an excellent basic scaffold for the engineering of Fc fragments for antigen-binding or other desired additional or improved properties. Additionally, we have introduced the intradomain disulfide bonds into an IgG Fc fragment engineered in C-terminal loops of the CH3 domain for binding to Her2/neu, and observed an increase of the T(m) of the CH3 domain for 7.5°C for CysP4, 15.5°C for CysP2 and 19°C for the CysP2 and CysP4 disulfide bonds combined in one molecule.     

Stabilization of an immunoglobulin fold domain by an engineered disulfide bond at the buried hydrophobic region

We report for the first time the stabilization of an immunoglobulin fold domain by an engineered disulfide bond. In the llama single-domain antibody, which has human chorionic gonadotropin as its specific antigen, Ala49 and Ile70 are buried in the structure. A mutant with an artificial disulfide bond at this position showed a 10 degrees C higher midpoint temperature of thermal unfolding than that without the extra disulfide bond. The modified domains exhibited an antigen binding affinity comparable with that of the wild-type domain. Ala49 and Ile70 are conserved in camel and llama single-domain antibody frameworks. Therefore, domains against different antigens are expected to be stabilized by the engineered disulfide bond examined here. In addition to the effect of the loop constraints in the unfolded state, thermodynamic analysis indicated that internal interaction and hydration also control the stability of domains with disulfide bonds. The change in physical properties resulting from mutation often causes unpredictable and destabilizing effects on these interactions. The introduction of a hydrophobic cystine into the hydrophobic region maintains the hydrophobicity of the protein and is expected to minimize the unfavorable mutational effects.     

Hierarchical formation of disulfide bonds in the immunoglobulin Fc fragment is assisted by protein-disulfide isomerase

Antibodies provide an excellent system to study the folding and assembly of all beta-sheet proteins and to elucidate the hierarchy of intra/inter chain disulfide bonds formation during the folding process of multimeric and multidomain proteins. Here, the folding process of the Fc fragment of the heavy chain of the antibody MAK33 was investigated. The Fc fragment consists of the C(H)3 and C(H)2 domains of the immunoglobulin heavy chain, both containing a single S-S bond. The folding process was investigated both in the absence and presence of the folding catalyst protein-disulfide isomerase (PDI), monitoring the evolution of intermediates by electrospray mass spectrometry. Moreover, the disulfide bonds present at different times in the folding mixture were identified by mass mapping to determine the hierarchy of disulfide bond formation. The analysis of the uncatalyzed folding showed that the species containing one intramolecular disulfide predominated throughout the entire process, whereas the fully oxidized Fc fragment never accumulated in significant amounts. This result suggests the presence of a kinetic trap during the Fc folding, preventing the one-disulfide-containing species (1S2H) to reach the fully oxidized protein (2S). The assignment of disulfide bonds revealed that 1S2H is a homogeneous species characterized by the presence of a single disulfide bond (Cys-130-Cys-188) belonging to the C(H)3 domain. When the folding experiments were carried out in the presence of PDI, the completely oxidized species accumulated and predominated at later stages of the process. This species contained the two native S-S bonds of the Fc protein. Our results indicate that the two domains of the Fc fragment fold independently, with a precise hierarchy of disulfide formation in which the disulfide bond, especially, of the C(H)2 domain requires catalysis by PDI.     

Engineered Soluble Monomeric IgG1 CH3 Domain: GENERATION,MECHANISMS OF FUNCTION,AND IMPLICATIONS FOR DESIGN OF BIOLOGICAL THERAPEUTICS*

Most of the therapeutic antibodies approved for clinical use are full-size IgG1 molecules. The interaction of the IgG1 Fc with the neonatal Fc receptor (FcRn) plays a critical role in maintaining their long half-life. We have hypothesized that isolated Fc domains could be engineered to functionally mimic full-size IgG1 (nanoantibodies) but with decreased (10-fold) size. Here, we report for the first time the successful generation of a soluble, monomeric CH3 domain (mCH3). In contrast to the wild-type dimeric CH3, the mCH3 exhibited pH-dependent binding to FcRn similar to that of Fc. The binding free energy of mCH3 to FcRn was higher than that of isolated CH2 but lower than that of Fc. Therefore, CH3 may contribute a larger portion of the free energy of binding to FcRn than CH2. A fusion protein of mCH3 with an engineered antibody domain (m36.4) also bound to FcRn in a pH-dependent fashion and exhibited significantly higher neutralizing activity against HIV-1 than m36.4-Fc fusion proteins. The m36.4-mCH3 fusion protein was monomeric, stable, soluble, and expressed at a high level in Escherichia coli. We also found that engineering an additional disulfide bond in mCH3 remarkably increased its thermal stability, whereas the FcRn binding was not affected. These data suggest that mCH3 could not only help in the exploration of the dual mechanisms of the CH3 contribution to Fc functions (dimerization and FcRn interactions) but could also be used for the development of candidate therapeutics with optimized half-life, enhanced tissue penetration, access to sterically restricted binding sites, and increased therapeutic efficacy.     

Domain-level stability of an antibody monitored by reduction, differential alkylation, and mass spectrometry analysis

Human immunoglobulin G1 (IgG1) contains 12 domains, and each has an intrachain disulfide bond that connects the two layers of antiparallel β-sheets. These intrachain disulfide bonds are shielded from solvents under native conditions. Therefore, accessibility of the disulfide bonds to reduction under conditions that unfold antibody has the potential to be a good indicator of the thermodynamic stability of each domain. The stability of a recombinant monoclonal antibody at the domain level was investigated using a novel method involving reduction of the disulfide bonds in the presence of increasing amounts of guanidine hydrochloride and alkylation with [¹²C]iodoacetic acid, which was followed by reduction of the remaining disulfide bonds and alkylation with [¹³C]iodoacetic acid. The percentage of modification by [¹²C]iodoacetic acid of each cysteine residue was calculated using mass spectra of the cysteine-containing tryptic peptides and used to follow the unfolding of each domain. It demonstrated that the CH2 domain was the least stable domain of the antibody, whereas the CH3 domain was the most stable domain of the antibody. Other domains showed intermediate resistance to the denaturant concentration, similar to the overall unfolding transition monitored by the intrinsic tryptophan fluorescence wavelength shift.     

Shortened engineered human antibody CH2 domains: increased stability and binding to the human neonatal Fc receptor

The immunoglobulin (Ig) constant CH2 domain is critical for antibody effector functions. Isolated CH2 domains are promising scaffolds for construction of libraries containing diverse binders that could also confer some effector functions. We have shown previously that an isolated human CH2 domain is relatively unstable to thermally induced unfolding, but its stability can be improved by engineering an additional disulfide bond (Gong, R., Vu, B. K., Feng, Y., Prieto, D. A., Dyba, M. A., Walsh, J. D., Prabakaran, P., Veenstra, T. D., Tarasov, S. G., Ishima, R., and Dimitrov, D. S. (2009) J. Biol. Chem. 284, 14203-14210). We have hypothesized that the stability of this engineered antibody domain could be further increased by removing unstructured residues. To test our hypothesis, we removed the seven N-terminal residues that are in a random coil as suggested by our analysis of the isolated CH2 crystal structure and NMR data. The resulting shortened engineered CH2 (m01s) was highly soluble, monomeric, and remarkably stable, with a melting temperature (T(m)) of 82.6 °C, which is about 10 and 30 °C higher than those of the original stabilized CH2 (m01) and CH2, respectively. m01s and m01 were more resistant to protease digestion than CH2. A newly identified anti-CH2 antibody that recognizes a conformational epitope bound to m01s significantly better (>10-fold higher affinity) than to CH2 and slightly better than to m01. m01s bound to a recombinant soluble human neonatal Fc receptor at pH 6.0 more strongly than CH2. These data suggest that shortening the m01 N terminus significantly increases stability without disrupting its conformation and that our approach for increasing stability and decreasing size by removing unstructured regions may also apply to other proteins.     

Relative stabilities of IgG1 and IgG4 Fab domains: Influence of the light-heavy interchain disulfide bond architecture

The stability of therapeutic antibodies is a prime pharmaceutical concern. In this work we examined thermal stability differences between human IgG1 and IgG4 Fab domains containing the same variable regions using the thermofluor assay. It was found that the IgG1 Fab domain is up to 11°C more stable than the IgG4 Fab domain containing the same variable region. We investigated the cause of this difference with the aim of developing a molecule with the enhanced stability of the IgG1 Fab and the biological properties of an IgG4 Fc. We found that replacing the seven residues, which differ between IgG1 C(H) 1 and IgG4 C(H) 1 domains, while retaining the native IgG1 light-heavy interchain disulfide (L-H) bond, did not affect thermal stability. Introducing the IgG1 type L-H interchain disulfide bond (DSB) into the IgG4 Fab resulted in an increase in thermal stability to levels observed in the IgG1 Fab with the same variable region. Conversely, replacement of the IgG1 L-H interchain DSB with the IgG4 type L-H interchain DSB reduced the thermal stability. We utilized the increased stability of the IgG1 Fab and designed a hybrid antibody with an IgG1 C(H) 1 linked to an IgG4 Fc via an IgG1 hinge. This construct has the expected biophysical properties of both the IgG4 Fc and IgG1 Fab domains and may therefore be a pharmaceutically relevant format.     

Engineering an improved IgG4 molecule with reduced disulfide bond heterogeneity and increased Fab domain thermal stability

The integrity of antibody structure, stability, and biophysical characterization are becoming increasingly important as antibodies receive increasing scrutiny from regulatory authorities. We altered the disulfide bond arrangement of an IgG4 molecule by mutation of the Cys at the N terminus of the heavy chain constant domain 1 (C(H)1) (Kabat position 127) to a Ser and introduction of a Cys at a variety of positions (positions 227-230) at the C terminus of C(H)1. An inter-LC-C(H)1 disulfide bond is thus formed, which mimics the disulfide bond arrangement found in an IgG1 molecule. The antibody species present in the supernatant following transient expression in Chinese hamster ovary cells were analyzed by immunoblot to investigate product homogeneity, and purified product was analyzed by a thermofluor assay to determine thermal stability. We show that the light chain can form an inter-LC-C(H)1 disulfide bond with a Cys when present at several positions on the upper hinge (positions 227-230) and that such engineered disulfide bonds can consequently increase the Fab domain thermal stability between 3 and 6.8 °C. The IgG4 disulfide mutants displaying the greatest increase in Fab thermal stability were also the most homogeneous in terms of disulfide bond arrangement and antibody species present. Importantly, mutations did not affect the affinity for antigen of the resultant molecules. In combination with the previously described S241P mutation, we present an IgG4 molecule with increased Fab thermal stability and reduced product heterogeneity that potentially offers advantages for the production of IgG4 molecules.     

Molecular dynamics simulations as a tool for improving protein stability

Haloalkane dehalogenase (DhlA) was used as a model protein to explore the possibility to use molecular dynamics (MD) simulations as a tool to identify flexible regions in proteins that can serve as a target for stability enhancement by introduction of a disulfide bond. DhlA consists of two domains: an alpha/beta-hydrolase fold main domain and a cap domain composed of five alpha-helices. MD simulations of DhlA showed high mobility in a helix-loop-helix region in the cap domain, involving residues 184-211. A disulfide cross-link was engineered between residue 201 of this flexible region and residue 16 of the main domain. The mutant enzyme showed substantial changes in both thermal and urea denaturation. The oxidized form of the mutant enzyme showed an increase of the apparent transition temperature from 47.5 to 52.5 degrees C, whereas the T(m,app) of the reduced mutant decreased by more than 8 degrees C compared to the wild-type enzyme. Urea denaturation results showed a similar trend. Measurement of the kinetic stability showed that the introduction of the disulfide bond caused a decrease in activation free energy of unfolding of 0.43 kcal mol(-1) compared to the wild-type enzyme and also indicated that the helix-loop-helix region was involved early in the unfolding process. The results show that MD simulations are capable of identifying mobile protein domains that can successfully be used as a target for stability enhancement by the introduction of a disulfide cross-link.     

Modification of a disulfide in the hinge region of rabbit IgG and study of the interaction of polyvalent ferritin antigen, protein A, and anti-IgG]

Since immunoglobulins are used in a vast variety of immunoassays, the problem of obtaining antibodies with enhanced antigen-binding activity is of great importance. In order to discriminate between putative approaches to activating antibody modification, some functional characteristics of rabbit IgG modified at the hinge disulfide by three reagents: iodoacetamide, N-ethylmaleimide, and 2.2'-dipyridyl disulfide, have been studied. As can be judged from gel-permeation chromatography data, the molecular sizes of modified rabbit IgG were slightly increased in comparison with the native protein. Using enzyme immunoassay, it was shown that modification by each of the above reagents results in the same degree of activation of the antibody binding to the protein polyvalent antigen-human ferritin, due to the increase in segmental flexibility, i.e., Fab motion around the Fo fragment of IgG. The type of concentration dependencies of antigen binding suggest that another determinant stimulating the antigen binding in addition to the increase in segmental flexibility, can be attributed to intra- or interdomain flexibility of domains constituting the Fab fragments. Using protein A and anti-IgG as conformational probes for the antibody Fo fragment, the conformation and conformational dynamics of both CD2 domain epitopes and the switch region between the CD2 and CH3 domains have been shown to be essentially unaffected by modification.     

Enhancement of the thermostability of subtilisin E by introduction of a disulfide bond engineered on the basis of structural comparison with a thermophilic serine protease

Sites for Cys substitutions to form a disulfide bond were chosen in subtilisin E from Bacillus subtilis, a cysteine-free bacterial serine protease, based on the structure of aqualysin I of Thermus aquaticus YT-1 (a thermophilic subtilisin-type protease containing two disulfide bonds). Cys residues were introduced at positions 61 (wild-type, Gly) and 98 (Ser) in subtilisin E by site-directed mutagenesis. The Cys-61/Cys-98 mutant subtilisin appeared to form a disulfide bond spontaneously in the expression system used and showed a catalytic efficiency equivalent to that of the wild-type enzyme for hydrolysis of a synthetic peptide substrate. The thermodynamic characteristics of these enzymes were examined in terms of enzyme autolysis (t1/2) and thermal stability (Tm). The half-life of the Cys-61/Cys-98 mutant was found to be 2-3 times longer than that of the wild-type enzyme. Similar results were obtained by differential scanning calorimetry. The disulfide mutant showed a Tm of 63.0 degrees C, which was 4.5 degrees C higher than that observed for the wild-type enzyme. Under reducing conditions, however, the characteristics of the mutant enzyme were found to revert to those of the wild-type enzyme. These results strongly suggest that the introduction of a disulfide bond by site-directed mutagenesis enhanced the thermostability of subtilisin E without changing the catalytic efficiency of the enzyme.     

Correlation between CD16a binding and immuno effector functionality of an antigen specific immunoglobulin Fc fragment (Fcab)

Antigen binding immunoglobulin Fc fragments (Fcab) are generated by engineering loop regions in the CH3 domain of human IgG1 Fc. Variants of an Fcab specific for Her-2 were designed to display either enhanced (S239D:A330L:I332E) or diminished (L234A:L235A) binding affinities to the Fc receptor CD16a based on mutations described previously. The two mutant Fcab proteins demonstrated the expected modulation of CD16a binding. Interaction with recombinant or cell surface expressed Her-2 was unaffected in both mutants compared to the parental Fcab. Binding affinities for CD16a correlated with the ADCC-potencies of the Fcab variants. Additional studies indicated that the L234A:L235A variant Fcab had equivalent structural features as the unmodified Fcab since their DSC profiles were similar and antigen binding after re-folding upon partial heat denaturation had not changed. Introduction of the S239D:A330L:I332E mutations resulted in a significant reduction of the CH2 domain melting temperature, a moderate decrease of the thermal transition of the CH3 domain and lower antigen binding after thermal stress compared to the parental Fcab. We conclude that the known correlation between CD16a binding affinity and ADCC potency is also valid in Fcab proteins and that antigen specific Fcab molecules can be further engineered for fine tuning of immuno effector functions.     

Identification of residues in the CH2/CH3 domain interface of IgA essential for interaction with the human fcalpha receptor (FcalphaR) CD89

Cellular receptors for IgA (FcalphaR) mediate important protective functions. An extensive panel of site-directed mutant IgAs was used to identify IgA residues critical for FcalphaR (CD89) binding and triggering. Although a tailpiece-deleted IgA1 was able to bind and trigger CD89, antibodies featuring CH3 domain exchanges between human IgA1 and IgG1 could not, indicating that both domains but not the tailpiece are required for FcalphaR recognition. To further investigate the role of the interdomain region, numerous IgA1s, each with a point substitution in either of two interdomain loops (Leu-257-Gly-259 in Calpha2; Pro-440-Phe-443 in Calpha3), were generated. With only one exception (G259R), substitutions produced either ablation (L257R, P440A, A442R, F443R) or marked reduction (P440R) in CD89 binding and triggering. Further support for involvement of these interdomain loops was provided by interspecies comparisons of IgA. Thus a human IgA1 mutant, LA441-442MN, which mimicked the mouse IgA loop sequence through substitution of two adjacent residues in the Calpha3 loop, was found, like mouse IgA, not to bind CD89. In contrast, bovine IgA1, identical to human IgA1 within these interdomain loops despite numerous differences elsewhere in the Fc region, did bind CD89. We have thus identified motifs in the interdomain region of IgA Fc critical for FcalphaR binding and triggering, significantly enhancing present understanding of the molecular basis of the IgA-FcalphaR interaction.     

A novel engineered interchain disulfide bond in the constant region enhances the thermostability of adalimumab Fab

We constructed a system for expressing the Fab of the therapeutic human monoclonal antibody adalimumab at a yield of 20 mg/L in the methylotrophic yeast Pichia pastoris. To examine the contribution of interchain disulfide bonds to conformational stability, we prepared adalimumab Fab from which the interchain disulfide bond at the C-terminal region at both the CH₁ and CL domains was deleted by substitution of Cys with Ala (Fab_ΔSS). DSC measurements showed that the Tm values of Fab_ΔSS were approximately 5 °C lower than those of wild-type Fab, suggesting that the interchain disulfide bond contributes to conformational thermostability. Using computer simulations, we designed a novel interchain disulfide bond outside the C-terminal region to increase the stability of Fab_ΔSS. The resulting Fab (mutSS Fab_ΔSS) had the mutations H:V177C and L:Q160C in Fab_ΔSS, confirming the formation of the disulfide bond between CH₁ and CL. The thermostability of mutSS Fab_ΔSS was approximately 5 °C higher than that of Fab_ΔSS. Therefore, the introduction of the designed interchain disulfide bond enhanced the thermostability of Fab_ΔSS and mitigated the destabilization caused by partial reduction of the interchain disulfide bond at the C-terminal region, which occurs in site-specific modification such as PEGylation.     

Role of a noncanonical disulfide bond in the stability,affinity, and flexibility of a VHH specific for the Listeria virulence factor InlB

A distinguishing feature of camel (Camelus dromedarius) VHH domains are noncanonical disulfide bonds between CDR1 and CDR3. The disulfide bond may provide an evolutionary advantage, as one of the cysteines in the bond is germline encoded. It has been hypothesized that this additional disulfide bond may play a role in binding affinity by reducing the entropic penalty associated with immobilization of a long CDR3 loop upon antigen binding. To examine the role of a noncanonical disulfide bond on antigen binding and the biophysical properties of a VHH domain, we have used the VHH R303, which binds the Listeria virulence factor InlB as a model. Using site directed mutagenesis, we produced a double mutant of R303 (C33A/C102A) to remove the extra disulfide bond of the VHH R303. Antigen binding was not affected by loss of the disulfide bond, however the mutant VHH displayed reduced thermal stability (T_m = 12°C lower than wild‐type), and a loss of the ability to fold reversibly due to heat induced aggregation. X‐ray structures of the mutant alone and in complex with InlB showed no major changes in the structure. B‐factor analysis of the structures suggested that the loss of the disulfide bond elicited no major change on the flexibility of the CDR loops, and revealed no evidence of loop immobilization upon antigen binding. These results suggest that the noncanonical disulfide bond found in camel VHH may have evolved to stabilize the biophysical properties of the domain, rather than playing a significant role in antigen binding.     

Bispecific Engineered Antibody Domains (Nanoantibodies) That Interact Noncompetitively with an HIV-1 Neutralizing Epitope and FcRn

Libraries based on an isolated human immunoglobulin G1 (IgG1) constant domain 2 (CH2) have been previously diversified by random mutagenesis. However, native isolated CH2 is not very stable and the generation of many mutations could lead to an increase in immunogenicity. Recently, we demonstrated that engineering an additional disulfide bond and removing seven N-terminal residues results in an engineered antibody domain (eAd) (m01s) with highly increased stability and enhanced binding to human neonatal Fc receptor (FcRn) (Gong et al, JBC, 2009 and 2011). We and others have also previously shown that grafting of the heavy chain complementarity region 3 (CDR-H3 (H3)) onto cognate positions of the variable domain leads to highly diversified libraries from which a number of binders to various antigens have been selected. However, grafting of H3s to non-cognate positions in constant domains results in additional residues at the junctions of H3s and the CH2 framework. Here we describe a new method based on multi-step PCR that allows the precise replacement of loop FG (no changes in its flanking sequences) by human H3s from another library. Using this method and limited mutagenesis of loops BC and DE we generated an eAd phage-displayed library. Panning of this library against an HIV-1 gp41 MPER peptide resulted in selection of a binder, m2a1, which neutralized HIV-1 isolates from different clades with modest activity and retained the m01s capability of binding to FcRn. This result provides a proof of concept that CH2-based antigen binders that also mimic to certain extent other functions of full-size antibodies (binding to FcRn) can be generated; we have previously hypothesized that such binders can be made and coined the term nanoantibodies (nAbs). Further studies in animal models and in humans will show how useful nAbs could be as therapeutics and diagnostics.     

Role of disulfide bonds in the stability of recombinant manganese peroxidase.

Phanerochaete chrysosporium manganese peroxidase (MnP) [isoenzyme H4] was engineered with additional disulfide bonds to provide structural reinforcement to the proximal and distal calcium-binding sites. This rational protein engineering investigated the effects of multiple disulfide bonds on the stabilization of the enzyme heme environment and oxidase activity. Stabilization of the heme environment was monitored by UV-visible spectroscopy based on the electronic state of the alkaline transition species of ferric and ferrous enzyme. The optical spectral data confirm an alkaline transition to hexacoordinate, low-spin heme species for native and wild-type MnP and show that the location of the engineered disulfide bonds in the protein can have significant effects on the electronic state of the enzyme. The addition of a single disulfide bond in the distal region of MnP resulted in an enzyme that maintained a pentacoordinate, high-spin heme at pH 9.0, whereas MnP with multiple engineered disulfide bonds did not exhibit an increase in stability of the pentacoordinate, high-spin state of the enzyme at alkaline pH. The mutant enzymes were assessed for increased stability by incubation at high pH. In comparison to wild-type MnP, enzymes containing engineered disulfide bonds in the distal and proximal regions of the protein retained greater levels of activity when restored to physiological pH. Additionally, when assayed for oxidase activity at pH 9.0, proteins containing engineered disulfide bonds exhibited slower rates of inactivation than wild-type MnP.     

Structural characterization of a recombinant CD4-IgG hybrid molecule

CD4-IgG is a homodimer of a hybrid polypeptide consisting of the two amino-terminal domains (residues 1-180) of human CD4 fused to the hinge region and the second and third constant-sequence (CH2 and CH3) Fc domains (residues 216-441) of human immunoglobulin G (IgG-1). This antibody-like molecule, termed an immunoadhesin, was produced in an effort to combine the binding specificity of CD4 with several potentially desirable properties of IgG molecules [Capon et al. (1989) Nature 337, 525-531]. The structural characteristics of the molecule have been evaluated to demonstrate that CD4-IgG has the same features as the N-terminal region of soluble CD4, while retaining those expected for the Fc portion of human IgG. Identification of peptides recovered from the tryptic map confirmed 98.8% of the expected structure of CD4-IgG. The detection of glucosamine in peptides containing Asn257 and the retention time shift of this tryptic peptide after deglycosylation confirmed the presence of Asn-linked oligosaccharides at this position. Four pairs of intrachain and two interchain disulfide bonds were also established.     

Locations of disulfide bonds and free cysteines in the heavy and light chains of recombinant human factor VIII (antihemophilic factor A).

The locations of disulfide bonds and free cysteines in the heavy and light chains of recombinant human factor VIII were determined by sequence analysis of fragments produced by chemical and enzymatic digestions. The A1 and A2 domains of the heavy chain and the A3 domain of the light chain contain one free cysteine and two disulfide bonds, whereas the C1 and C2 domains of the light chain have one disulfide bond and no free cysteine. The positions of these disulfide bonds are conserved in factor V and ceruloplasmin except that the second disulfide bond in the A3 domain is missing in both factor V and ceruloplasmin. The positions of the three free cysteines of factor VIII are the same as three of the four cysteines present in ceruloplasmin. However, the positions of the free cysteines in factor VIII and ceruloplasmin are not conserved in factor V.