A dynamically localized histidine kinase controls the asymmetric distribution of polar pili proteins

Each cell division in Caulobacter crescentus is asymmetric, yielding a swarmer cell with several polar pili and a non-piliated stalked cell. To identify factors contributing to the asymmetric biogenesis of polar pili, cytological studies of pilus assembly components were performed. We show here that the CpaC protein, which is thought to form the outer membrane pilus secretion channel, and its assembly factor, CpaE, are localized to the cell pole prior to the polymerization of the pilus filament. We demonstrate that the PleC histidine kinase, a two-component signal transduction protein shown previously to localize to the piliated cell pole before and during pilus assembly, controls the accumulation of the pilin subunit, PilA. Using an inactive form of PleC (PleCH610A) that lacks the catalytic histidine residue, we provide evidence that PleC activity is responsible for the asymmetric distribution of CpaE and itself to only one of the two cell poles. Thus, a polar signal transduction protein controls its own asymmetric location as well as that of a factor assembling a polar organelle.     

A lytic transglycosylase homologue,PleA, is required for the assembly of pili and the flagellum at the Caulobacter crescentus cell pole

Two distinct protein complexes, the flagellum and the pilus biogenesis machinery, are asymmetrically assembled at one pole of the Caulobacter predivisional cell. Cell division yields dissimilar daughter cells: a stalked cell and a swarmer cell that assembles several pili at the flagellated cell pole. Strains bearing mutations in the pleA gene are pililess and non-flagellated. The PleA protein contains a region that is similar to a peptidoglycan-hydrolytic active site, and a point mutation at this site in PleA results in the loss of flagellum and pili biogenesis. PleA was found to be required for the insertion of the outer membrane pilus secretion channel at the cell pole and for the accumulation of the PilA pilin subunit. PleA is also required for the assembly of substructures of the flagellar basal body hook complex that are located in or traverse the peptidoglycan layer. These results argue that PleA facilitates the assembly of envelope-spanning structures at the cell pole. In support of this, PleA was found to be present only during a short interval in the cell cycle that coincides with the assembly of the flagellum and the pilus secretion apparatus.     

Caulobacter crescentus pili: analysis of production during development

The pili of Caulobacter crescentus are structures whose appearance is regulated during the development of the swarmer cell pole. Pili are assembled during the predivisional and swarmer cell stages, at the same time as the flagellum, and disappear as the swarmer cell differentiates into a stalked cell. Pilin is the protein which polymerizes to form the pilus. An immune precipitation assay, developed to examine the periodicity of pilin synthesis during the cell cycle, demonstrated that pilin synthesis begins in the early stalked cell and is probably completed before cell division. Thus, the entire period of synthesis occurs before the pili are clearly visible at the differentiated cell pole. Likewise, the functional stability of the pilin mRNA is relatively short, further suggesting that the protein monomers accumulate prior to assembly. Unlike the case of the flagellins, experiments with the DNA replication inhibitor hydroxyurea did not establish a correlation between the DNA replication and the onset of pilin synthesis. In addition to pilin, several other developmentally regulated proteins, including the flagellins, are reproducibly precipitated in the pilin immunoassay. Their presence in the precipitate is a specific consequence of the antipilin antibody. Analysis of the antibody preparations yielded conflicting results; electron microscopic studies with ferritin-coupled antibody and double diffusion analysis indicated no binding activity to any cell components other than pilin. However, an assay based on filter transferred preparations of electrophoresed cell proteins indicated that at least one additional class of proteins in the immune precipitate may bind pilin antibody. These results are discussed in the context of the possible formation of a discrete membrane complex in the polar region of the cell which may be involved in the regulation of spatial development in Caulobacter.     

Caulobacter crescentus pili: structure and stage-specific expression.

Pili are functionally expressed during the predivisional and swarmer stages of the Caulobacter crescentus differentiation cycle. They appear on the developing swarmer pole and at the same cellular location as flagella and the phiCbK receptor sites. Pili disappear when the swarmer cell differentiates into a stalked cell; this occurs with the loss of flagella and the disappearance of phage receptor sites. C. crescentus CB13B1a pili have been purified and characterized. Monomeric pilin is a protein with an apparent molecular weight of 8,500 that stains weakly with periodic acid-Schiff reagent. The amino acid composition of purified pilin reveals very low quantities of basic amino acids and a complete absence of methionine. Pilin is synthesized throughout the C. crescentus differentiation cycle. Neither free pili nor pilin monomers are detectable in the growth media, suggesting that loss of piliation in the swarmer- to stalked-cell transition occurs via pilus retraction.     

The Caulobacter crescentus polar organelle development protein PodJ is differentially localized and is required for polar targeting of the PleC development regulator

Regulation of polar development and cell division in Caulobacter crescentus relies on the dynamic localization of several proteins to cell poles at specific stages of the cell cycle. The polar organelle development protein, PodJ, is required for the synthesis of the adhesive holdfast and pili. Here we show the cell cycle localization of PodJ and describe a novel role for this protein in controlling the dynamic localization of the developmental regulator PleC. In swarmer cells, a short form of PodJ is localized at the flagellated pole. Upon differentiation of the swarmer cell into a stalked cell, full length PodJ is synthesized and localizes to the pole opposite the stalk. In late predivisional cells, full length PodJ is processed into a short form which remains localized at the flagellar pole after cell division and is degraded during swarmer to stalked cell differentiation. Polar localization of the developmental regulator PleC requires the presence of PodJ. In contrast, the polar localization of PodJ is not dependent on the presence of PleC. These results indicate that PodJ is an important determinant for the localization of a major regulator of cell differentiation. Thus, PodJ acts directly or indirectly to target PleC to the incipient swarmer pole, to establish the cellular asymmetry that leads to the synthesis of holdfasts and pili at their proper subcellular location.     

Assembly of pili on the surface of Corynebacterium diphtheriae

Pili of Gram-negative pathogens are formed from pilin precursor molecules by non-covalent association within the outer membrane envelope. Gram-positive microbes employ the cell wall peptidoglycan as a surface organelle for the covalent attachment of proteins, however, an assembly pathway for pili has not yet been revealed. We show here that pili of Corynebacterium diphtheriae are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals and SpaC seems positioned at the pilus tip. Assembled pili are released from the bacterial surface by treatment with murein hydrolase, suggesting that the pilus fibres may be anchored to the cell wall envelope. All three pilin subunit proteins are synthesized as precursors carrying N-terminal signal peptides and C-terminal sorting signals. Some, but not all, of the six sortase genes encoded in the genome of C. diphtheriae are required for precursor processing, pilus assembly or cell wall envelope attachment. Pilus assembly is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side chain amino groups of pilin motif sequences to generate links between pilin subunits. This covalent tethering of adjacent pilin subunits appears to have evolved in many Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs.     

Expression of multiple types of N-methyl Phe pili in Pseudomonas aeruginosa

The nature of pili synthesized by Pseudomonas aeruginosa when plasmid-borne genes of homologous pilins from Bacteroides nodosus are introduced as thermoregulated expression systems has been ascertained. Expression of B. nodosus pili inhibited the production of indigenous P. aeruginosa pili, and an organism harbouring pilin genes from two strains of B. nodosus produced two serologically distinct populations of pili on each cell. Simultaneous production of both indigenous and foreign pili was achieved by partial induction of expression. Homogeneity in pilus structure suggests either that there is an exclusive specificity of interaction between identical pilin subunits in pilus assembly, or that each pilus is produced from the translation products of a single messenger RNA molecule, with translation and pilus assembly closely coupled.     

Products of three accessory genes, pilB, pilC, and pilD, are required for biogenesis of Pseudomonas aeruginosa pili.

The polar pili of Pseudomonas aeruginosa are composed of monomers of the pilin structural subunits. The biogenesis of pili involves the synthesis of pilin precursor, cleavage of a six-amino-acid leader peptide, membrane translocation, and assembly of monomers into a filamentous structure extending from the bacterial surface. This report describes three novel genes necessary for the formation of pili. DNA sequences adjacent to pilA, the pilin structural gene, were cloned and mutagenized with transposon Tn5. Each of the insertions were introduced into the chromosome of P. aeruginosa PAK by gene replacement. The effect of the Tn5 insertions in the bacterial chromosome on pilus assembly was assessed by electron microscopy and sensitivity of mutants to a pilus-specific bacteriophage. The resultant mutants were also tested for synthesis and membrane localization of the pilin antigen in order to define the genes required for maturation, export, and assembly of pilin. A 4.0-kilobase-pair region of DNA adjacent to the pilin structural gene was found to be essential for formation of pili. This region was sequenced and found to contain three open reading frames coding for 62-, 38- to 45-, and 28- to 32-kilodalton proteins (pilB, pilC, and pilD, respectively). Three proteins of similar molecular weight were expressed in Escherichia coli from the 4.0-kilobase-pair fragment flanking pilA with use of a T7 promoter-polymerase expression system. The results of the analyses of the three genes and the implications for pilin assembly and maturation are discussed.     

New tools in an old trade: CS1 pilus morphogenesis

CS1 pili serve as the prototype for a large class of serologically distinct pili associated with enterotoxigenic Escherichia coli that cause diarrhoea in humans. The four genes essential for CS1 pilus morphogenesis, cooB, A, C and D, are arranged in an operon and encode structural and assembly proteins unlike those of other pilus systems commonly associated with Gram-negative bacteria. CS1 pili are composed primarily of the major pilin subunit, CooA, which determines the serological type of the pilus. The major pilin subunit is assembled into pili by the proteins CooB, CooC and CooD. CooD is both a minor component found at the pilus tip and an essential assembly protein, whereas CooC is an outer membrane protein thought to be involved in pilin transport. CooB is a novel periplasmic chaperone-like protein that forms intermolecular complexes with and stabilizes the major and minor pilins. Unlike other pilin chaperones, CooB also stabilizes the outer membrane component of the assembly system, CooC. The proteins of CS1 pili have no significant homology to those of the well-characterized Pap (pyelonephritis-associated) pili and related systems, although most of the features of pilus morphogenesis are similar. Therefore, these appear to be among the rare cases of convergent evolution. Thus, for CS1 pili, enterotoxigenic E. coli use new protein 'tools' in the old 'trade' of forming functional pili.     

Expression of multiple types of N-methyl Phe pili in Pseudomonas aeruginosa

The nature of pili synthesized by Pseudomonas aeruginosa when plasmid-borne genes of homologous pilins from Bacteroides nodosus are Introduced as thermoregulated expression systems has been ascertained. Expression of B. nodosus pili inhibited the production of indigenous P. aeruginosa pili, and an organism harbouring pilin genes from two strains of B. nodosus produced two seroiogically distinct populations of pili on each cell. Simultaneous production of both Indigenous and foreign pili was achieved by partial induction of expression. Homogeneity in pilus structure suggests either that there is an exclusive specificity of Interaction between identical pilin subunits in pilus assembly, or that each pilus is produced from the translation products of a single messenger RNA molecule, with translation and pilus assembly closely coupled.     

Type III pilus of corynebacteria: Pilus length is determined by the level of its major pilin subunit

Multiple pilus gene clusters have been identified in several gram-positive bacterial genomes sequenced to date, including the Actinomycetales, clostridia, streptococci, and corynebacteria. The genome of Corynebacterium diphtheriae contains three pilus gene clusters, two of which have been previously characterized. Here, we report the characterization of the third pilus encoded by the spaHIG cluster. By using electron microscopy and biochemical analysis, we demonstrate that SpaH forms the pilus shaft, while SpaI decorates the structure and SpaG is largely located at the pilus tip. The assembly of the SpaHIG pilus requires a specific sortase located within the spaHIG pilus gene cluster. Deletion of genes specific for the synthesis and polymerization of the other two pilus types does not affect the SpaHIG pilus. Moreover, SpaH but not SpaI or SpaG is essential for the formation of the filament. When expressed under the control of an inducible promoter, the amount of the SpaH pilin regulates pilus length; no pili are assembled from an SpaH precursor that has an alanine in place of the conserved lysine of the SpaH pilin motif. Thus, the spaHIG pilus gene cluster encodes a pilus structure that is independently assembled and antigenically distinct from other pili of C. diphtheriae. We incorporate these findings in a model of sortase-mediated pilus assembly that may be applicable to many gram-positive pathogens.     

Characterization of the SpaCBA pilus fibers in the probiotic Lactobacillus rhamnosus GG

Lactobacillus rhamnosus GG is a human intestinal isolate that has been studied intensively because of its probiotic properties. We have previously shown that L. rhamnosus GG produces proteinaceous pili that earlier had been observed only in Gram-positive pathogens (M. Kankainen et al., Proc. Natl. Acad. Sci. U. S. A. 106:17193-17198, 2009). These pili were found to be encoded by the spaCBA gene cluster, and the pilus-associated SpaC pilin was shown to confer on the cells a mucus-binding ability. In addition to the spaCBA cluster, another putative pilus cluster, spaFED, was predicted from the L. rhamnosus GG genome sequence. Herein, we show that only SpaCBA pili are produced by L. rhamnosus, and we describe a detailed analysis of cell wall-associated and affinity-purified SpaCBA pili by Western blotting and immunogold electron microscopy. Our results indicate that SpaCBA pili are heterotrimeric protrusions with a SpaA subunit as the shaft-forming major pilin. Only a few SpaB subunits could be observed in pilus fibers. Instead, SpaB pilins were found at pilus bases, as assessed by immunogold double labeling of thin sections of cells, suggesting that SpaB is involved in the termination of pilus assembly. The SpaC adhesin was present along the whole pilus length at numbers nearly equaling those of SpaA. The relative amount and uniform distribution of SpaC within pili not only makes it possible to exert both long-distance and intimate contact with host tissue but also provides mucus-binding strength, which explains the prolonged intestinal residency times observed for L. rhamnosus GG compared to that of nonpiliated lactobacilli.     

Sortases and pilin elements involved in pilus assembly of Corynebacterium diphtheriae

Corynebacterium diphtheriae SpaA pili are composed of three pilin subunits, SpaA, SpaB and SpaC. SpaA, the major pilin protein, is distributed uniformly along the pilus shaft, whereas SpaB is observed at regular intervals, and SpaC seems to be positioned at the pilus tip. Pilus assembly in C. diphtheriae requires the pilin motif and the C-terminal sorting signal of SpaA, and is proposed to occur by a mechanism of ordered cross-linking, whereby pilin-specific sortase enzymes cleave precursor proteins at sorting signals and involve the side-chain amino groups of pilin motif sequences to generate covalent linkages between pilin subunits. We show here that two elements of SpaA pilin precursor, the pilin motif and the sorting signal, are together sufficient to promote the polymerization of an otherwise secreted protein by a process requiring the function of the sortase A gene (srtA). Five other sortase genes are dispensable for SpaA pilus assembly. Further, the incorporation of SpaB into SpaA pili requires a glutamic acid residue within the E box motif of SpaA, a feature that is found to be conserved in other Gram-positive pathogens that encode sortase and pilin subunit genes with sorting signals and pilin motifs. When the main fimbrial subunit of Actinomyces naeslundii type I fimbriae, FimA, is expressed in corynebacteria, C. diphtheriae strain NCTC13129 polymerized FimA to form short fibres. Although C. diphtheriae does not depend on other actinomycetal genes for FimA polymerization, this process involves the pilin motif and the sorting signal of FimA as well as corynebacterial sortase D (SrtD). Thus, pilus assembly in Gram-positive bacteria seems to occur by a universal mechanism of ordered cross-linking of precursor proteins, the multiple conserved features of which are recognized by designated sortase enzymes.     

Type III secretion system-associated pilus of Pseudomonas syringae as an epitope display tool

Type III secretion system-associated pili found in several plant pathogenic bacteria are required for injection of virulence proteins from bacteria into the plant cells. The possibility to use the type III secretion pilus of Pseudomonas syringae as an epitope display tool was studied. The advantage of the type III secretion pilus, compared with conventional fimbrial epitope display tools, is that the pilin subunits of the type III secretion pilus can auto-assemble into intact pili in vitro. Various peptides were inserted into the type III secretion pilin subunit, and secretion, assembly and surface properties of the modified pili were monitored. It was concluded that the outwards-projecting N-terminal region of the pilin can bear even 43 amino acids insertion. The three-dimensional structure of the epitope, however, can restrict the use of the pilus as an epitope display tool: a beta-hairpin structure was poorly tolerated.     

Disparate subcellular localization patterns of Pseudomonas aeruginosa Type IV pilus ATPases involved in twitching motility

The opportunistic pathogen Pseudomonas aeruginosa expresses polar type IV pili (TFP), which are responsible for adhesion to various materials and twitching motility on surfaces. Twitching occurs by alternate extension and retraction of TFP, which arise from assembly and disassembly of pilin subunits at the base of the pilus. The ATPase PilB promotes pilin assembly, while the ATPase PilT or PilU or both promote pilin dissociation. Fluorescent fusions to two of the three ATPases (PilT and PilU) were functional, as shown by complementation of the corresponding mutants. PilB and PilT fusions localized to both poles, while PilU fusions localized only to the piliated pole. To identify the portion of the ATPases required for localization, sequential C-terminal deletions of PilT and PilU were generated. The conserved His and Walker B boxes were dispensable for polar localization but were required for twitching motility, showing that localization and function could be uncoupled. Truncated fusions that retained polar localization maintained their distinctive distribution patterns. To dissect the cellular factors involved in establishing polarity, fusion protein localization was monitored with a panel of TFP mutants. The localization of yellow fluorescent protein (YFP)-PilT and YFP-PilU was independent of the subunit PilA, other TFP ATPases, and TFP-associated proteins previously shown to be associated with the membrane or exhibiting polar localization. In contrast, YFP-PilB exhibited diffuse cytoplasmic localization in a pilC mutant, suggesting that PilC is required for polar localization of PilB. Finally, localization studies performed with fluorescent ATPase chimeras of PilT and PilU demonstrated that information responsible for the characteristic localization patterns of the ATPases likely resides in their N termini.     

Crystal Structure of the Minor Pilin CofB,the Initiator of CFA/III Pilus Assembly in Enterotoxigenic Escherichia coli

Type IV pili are extracellular polymers of the major pilin subunit. These subunits are held together in the pilus filament by hydrophobic interactions among their N-terminal α-helices, which also anchor the pilin subunits in the inner membrane prior to pilus assembly. Type IV pilus assembly involves a conserved group of proteins that span the envelope of Gram-negative bacteria. Among these is a set of minor pilins, so named because they share their hydrophobic N-terminal polymerization/membrane anchor segment with the major pilins but are much less abundant. Minor pilins influence pilus assembly and retraction, but their precise functions are not well defined. The Type IV pilus systems of enterotoxigenic Escherichia coli and Vibrio cholerae are among the simplest of Type IV pilus systems and possess only a single minor pilin. Here we show that the enterotoxigenic E. coli minor pilins CofB and LngB are required for assembly of their respective Type IV pili, CFA/III and Longus. Low levels of the minor pilins are optimal for pilus assembly, and CofB can be detected in the pilus fraction. We solved the 2.0 Å crystal structure of N-terminally truncated CofB, revealing a pilin-like protein with an extended C-terminal region composed of two discrete domains connected by flexible linkers. The C-terminal region is required for CofB to initiate pilus assembly. We propose a model for CofB-initiated pilus assembly with implications for understanding filament growth in more complex Type IV pilus systems as well as the related Type II secretion system.