The structure of bacteriophage T4 gene product 9: the trigger for tail contraction.

BACKGROUND: The T4 bacteriophage consists of a head, filled with double-stranded DNA, and a complex contractile tail required for the ejection of the viral genome into the Escherichia coli host. The tail has a baseplate to wh?ch are attached six long and six short tail fibers. These fibers are the sensing devices for recognizing the host. When activated by attachment to cell receptors, the fibers cause a conformational transition in the baseplate and subsequently in the tail sheath, which initiates DNA ejection. The baseplate is a multisubunit complex of proteins encoded by 15 genes. Gene product 9 (gp9) is the protein that connects the long tail fibers to the baseplate and triggers the tail contraction after virus attachment to a host cell. RESULTS: The crystal structure of recombinant gp9, determined to 2.3 A resolution, shows that the protein of 288 amino acid residues assembles as a homotrimer. The monomer consists of three domains: the N-terminal domain generates a triple coiled coil; the middle domain is a mixed, seven-stranded beta sandwich with a topology not previously observed; and the C-terminal domain is an eight-stranded, antiparallel beta sandwich having some resemblance to 'jelly-roll' viral capsid protein structures. CONCLUSIONS: The biologically active form of gp9 is a trimer. The protein contains flexible interdomain hinges, which are presumably required to facilitate signal transmission between the long tail fibers and the baseplate. Structural and genetic analyses show that the C-terminal domain is bound to the baseplate, and the N-terminal coiled-coil domain is associated with the long tail fibers.     

The function of tail fibers in triggering baseplate expansion of bacteriophage T4

Normal particles of bacteriophage T4 have six long tail fibers attached to a hexagonal baseplate. T4 particles having various complements of tail fibers were prepared by in vitro addition of fibers to fiberless particles, and the infectivity of the particles was determined. Particles having fewer than six fibers (partially fibered) were found to have a decreased probability of infection. Partially fibered particles having T4 fibers were completed by addition of T6 fibers, and the infectivity was determined on a host that lacked the T6 tail fiber receptor. Attachment of the additional fibers increased the infectivity even though the T6 fibers could not bind to the host cell. The infectivity of particles having mixtures of T4 and T6 fibers was determined on cells having only one type of receptor. The results indicated that particles bound by only three fibers have a low probability of infection. The effect of thermolabile baseplate mutations was also examined. Studies of partially fibered particles and particles with mixtures of fibers indicated that particles with altered baseplates have a less stringent requirement for binding of the tail fibers for infection.     

Structural Characteristics of the Short-Tail Fibers of T4 Bacteriophage

The characteristics of pure preparations of short-tail fibers of bacteriophage T4 have been studied in the optical and electron microscope. Three main structures were observed: 1) spheres of 8.1 nm diameter; 2) fibers 43 nm long and 3.8 nm thick; and 3) fibers 54 nm long and 3.2 nm thick. Both types of fibers exhibited a regular beaded appearance. The 43-nm fibers were the most abundant structure. During the process of purification of the short-tail fibers, the formation of aggregates was observed each time the material containing the short-tail fibers was dialyzed against saline solutions. These aggregates became increasingly fibrous (as observed in the optical microscope) as the material used was increasingly enriched in short-tail fibers. Finally, most of the aggregates were of the fibrous type when they were formed from a purified preparation of short-tail fibers. In the electron microscope, it was found that the filamentous aggregates were organized in well-defined bundles. The amino acid composition of the highly purified short-tail fibers was also determined. Among the known fibrous proteins, the ones that most resemble the amino acid composition of the short-tail fibers are actin and fibrinogen. These observations are discussed in relation to the T4 short-tail fiber structure and their localization on the hexagonal baseplate of the T4 tail structure.     

Structural role of the polyglutamate portion of the folate found in T4D bacteriophage baseplate.

Three types of reagents were used to determine the structural role and location of the polyglutamate portion of the Escherichia coli T4D bacteriophage baseplate dihydropteroyl hexaglutamate. These reagents were examined for their effect in vitro on some of the final steps in phage baseplate morphogenesis. The reagents were (i) a series of oligopeptides composed solely of glutamic acid residues but with various chemical linkages and chain lengths; (ii) a homogeneous preparation of carboxypeptidase G1, an exopeptidase that hydrolyzes carboxyl-terminal glutamates (or aspartates) from simple oligopeptides, including the gamma-glutamyl bonds on folyl polyglutamates as well as the bond between the carboxyl group of the p-aminobenzoyl moiety and the amino group of the first glutamic acid residue of folic acid; and (iii) antisera prepared against a polyglutamate hapten. All three types of reagent markedly inhibited the attachment of the phage long tail fibers to the baseplate. Other steps in baseplate assembly such as the addition of T4D gene 11 or gene 12 products were not affected by any of these reagents. These results indicate that the polyglutamate portion of the folate is located near the attachment site on the bacteriophage baseplate for the long tail fibers.     

Effect of thermoinduced changes in T4 bacteriophage structure on the process of molecular recognition of 'host' cells.

By means of high-precision acoustic measurements and by methods of fluorescent and electron microscopy, investigations have been performed of thermoinduced conformational changes in T4 bacteriophage and its thermolabile mutants altered in baseplate proteins (gene products 7, 8, 10). A relationship was found between the conformational changes in T4 bacteriophage structure in the temperature range of 33-45 degrees C and the efficiency of bacteriophage adsorption and the changes in the orientation of long tail fibers. The possibility of heat regulation of 'recognition' of 'host' cells by bacterial viruses is suggested.     

The role of temperature as a factor of structure and functional fit of a "prey" virus based on the example of phage T4]

By means of high-precision acoustic measurements and by the methods of fluorescent and electron microscopy investigations were performed of thermoinduced conformational changes in T4 bacteriophage and its thermolabile mutants altered in baseplate proteins (gene products "7", "8", "10"). A relationship was found between the conformational changes in T4 bacteriophage structure in the temperature range of 33-45 degrees C and the efficiency of bacteriophage adsorption and changes in the orientation of long tail fibers. Possibility of heat regulation of "recognition" of "host" cells by bacterial viruses is suggested.     

The bacteriophage T4 DNA injection machine

The tail of bacteriophage T4 consists of a contractile sheath surrounding a rigid tube and terminating in a multiprotein baseplate, to which the long and short tail fibers of the phage are attached. Upon binding of the fibers to their cell receptors, the baseplate undergoes a large conformational switch, which initiates sheath contraction and culminates in transfer of the phage DNA from the capsid into the host cell through the tail tube. The baseplate has a dome-shaped sixfold-symmetric structure, which is stabilized by a garland of six short tail fibers, running around the periphery of the dome. In the center of the dome, there is a membrane-puncturing device, containing three lysozyme domains, which disrupts the intermembrane peptidoglycan layer during infection.     

Attachment of tail fibers in bacteriophage T4 assembly. Identification of the baseplate protein to which tail fibers attach

A phage-neutralizing rabbit antiserum collected after immunization with tail-fiberless bacteriophage T4 particles was adsorbed with complete T4 phage. The resulting adsorbed serum inhibited tail fiber attachment in vitro. To identify the antigens against which this inhibitory activity was directed, blocking experiments were carried out with the adsorbed serum. Isolated complete baseplates and mutant-infected-cell extracts lacking known baseplate gene products but containing gene 9 product showed similar high levels of blocking activity. By contrast, both tail-fiberless particles lacking gene 9 product and infected-cell extracts made with gene 9 mutants showed 30-fold to 100-fold lower blocking activity. These results strongly support the conclusion that gene 9 product is the baseplate protein to which tail fibers attach.     

The effect of thin filament activation on the attachment of weak binding cross-bridges: A two-dimensional x-ray diffraction study on single muscle fibers

To study possible structural changes in weak cross-bridge attachment to actin upon activation of the thin filament, two-dimensional (2D) x-ray diffraction patterns of skinned fibers from rabbit psoas muscle were recorded at low and high calcium concentration in the presence of saturating concentrations of MgATPgammaS, a nucleotide analog for weak binding states. We also studied 2D x-ray diffraction patterns recorded under relaxing conditions at an ionic strength above and below 50 mM, because it had been proposed from solution studies that reducing ionic strength below 50 mM also induces activation of the thin filament. For this project a novel preparation had to be established that allows recording of 2D x-ray diffraction patterns from single muscle fibers instead of natural fiber bundles. This was required to minimize substrate depletion or product accumulation within the fibers. When the calcium concentration was raised, the diffraction patterns recorded with MgATPgammaS revealed small changes in meridional reflections and layer line intensities that could be attributed in part to the effects of calcium binding to the thin filament (increase in I380, decrease in first actin layer line intensity, increase in I59) and in part to small structural changes of weakly attached cross-bridges (e.g., increase in I143 and I72). Calcium-induced small-scale structural rearrangements of cross-bridges weakly attached to actin in the presence of MgATPgammaS are consistent with our previous observation of reduced rate constants for attachment and detachment of cross-bridges with MgATPgammaS at high calcium. Yet, no evidence was found that weakly attached cross-bridges change their mode of attachment toward a stereospecific conformation when the actin filament is activated by adding calcium. Similarly, reducing ionic strength to less than 50 mM does not induce a transition from nonstereospecific to stereospecific attachment.     

The tail structure of bacteriophage T4 and its mechanism of contraction

Bacteriophage T4 and related viruses have a contractile tail that serves as an efficient mechanical device for infecting bacteria. A three-dimensional cryo-EM reconstruction of the mature T4 tail assembly at 15-A resolution shows the hexagonal dome-shaped baseplate, the extended contractile sheath, the long tail fibers attached to the baseplate and the collar formed by six whiskers that interact with the long tail fibers. Comparison with the structure of the contracted tail shows that tail contraction is associated with a substantial rearrangement of the domains within the sheath protein and results in shortening of the sheath to about one-third of its original length. During contraction, the tail tube extends beneath the baseplate by about one-half of its total length and rotates by 345 degrees , allowing it to cross the host's periplasmic space.     

Attachment of tail fibers in bacteriophage T4 assembly: role of the phage whiskers.

The collar and whiskers of bacteriophage T4 extend outward from the top of the tail and play a role in regulating retraction of the tail fibers (Conley &; Wood, 1975). The collar and whiskers also are required for efficient tail fiber attachment during phage assembly. The structural gene for the collar/whisker protein is called wac. In vitro, infected-cell extracts that contain tail fibers activate whiskerless (wac) tail fiberless particles and ordinary (wac⁺) tail fiberless particles at equal rates if the extracts contain the wac⁺ gene product. However, extracts that contain tail fibers but no wac⁺ gene product activate wac particles about ten times more slowly. In vivo, whiskers are not essential for plaque formation, but a wac mutation causes a delay in the appearance of intracellular phage and a fivefold decrease in the burst size of infectious particles.The effect of the whiskers on tail fiber attachment is due to an interaction between the whisker and the distal half of the tail fiber, similar if not identical to the interaction that controls tail fiber retraction in complete phage. The following observations support this view: a slow rate of in vitro tail fiber attachment similar to that described above is seen with wac⁺ particles when they are pretreated with anti-whisker serum, or when the tail fibers carry a mutational alteration in gp36, a structural protein in the distal half fiber near the central kink. Lack of whiskers does not affect the slow rate of attachment of proximal half fibers to the baseplate of fiberless particles, but lack of whiskers greatly decreases the rate at which particles with attached proximal half fibers are activated by addition of distal half fibers. Since whiskers normally are attached to the phage only after head—tail union (Coombs &; Eiserling, 1977; Terzaghi et al., 1978), these findings explain why tail fibers do not attach efficiently to the baseplates of free tails.     

Structure and location of gene product 8 in the bacteriophage T4 baseplate

Many bacteriophages, such as T4, T7, RB49, and phi29, have complex, sometimes multilayered, tails that facilitate an almost 100% success rate for the viral particles to infect host cells. In bacteriophage T4, there is a baseplate, which is a multiprotein assembly, at the distal end of the contractile tail. The baseplate communicates to the tail that the phage fibers have attached to the host cell, thereby initiating the infection process. Gene product 8 (gp8), whose amino acid sequence consists of 334 residues, is one of at least 16 different structural proteins that constitute the T4 baseplate and is the sixth baseplate protein whose structure has been determined. A 2.0A resolution X-ray structure of gp8 shows that the two-domain protein forms a dimer, in which each monomer consists of a three-layered beta-sandwich with two loops, each containing an alpha-helix at the opposite sides of the sandwich. The crystals of gp8 were produced in the presence of concentrated chloride and bromide ions, resulting in at least 11 halide-binding sites per monomer. Five halide sites, situated at the N termini of alpha-helices, have a protein environment observed in other halide-containing protein crystal structures. The computer programs EMfit and SITUS were used to determine the positions of six gp8 dimers within the 12A resolution cryo-electron microscopy image reconstruction of the baseplate-tail tube complex. The gp8 dimers were found to be located in the upper part of the baseplate outer rim. About 20% of the gp8 surface is involved in contacts with other baseplate proteins, presumed to be gp6, gp7, and gp10. With the structure determination of gp8, a total of 53% of the volume of the baseplate has now been interpreted in terms of its atomic structure.     

Stiffness and force in activated frog skeletal muscle fibers.

Single fibers, isolated intact from frog skeletal muscles, were held firmly very near to each end by stiff metal clasps fastened to the tendons. The fibers were then placed horizontally between two steel hooks inserted in eyelets of the tendon clasps. One hook was attached to a capacitance gauge force transducer (resonance frequency up to approximately 50 kHz) and the other was attached to a moving-coil length changer. This allowed us to impose small, rapid releases (complete in less than 0.15 ms) and high frequency oscillations (up to 13 kHz) to one end of a resting or contracting fiber and measure the consequences at the other end with fast time resolution at 4 to 6 degrees C. The stiffness of short fibers (1.8-2.6 mm) was determined directly from the ratio of force to length variations produced by the length changer. The resonance frequency of short fibers was so high (approximately 40 kHz) that intrinsic oscillations were not detectably excited. The stiffness of long fibers, on the other hand, was calculated from measurement of the mechanical resonance frequency of a fiber. Using both short and long fibers, we measured the sinusoids of force at one end of a contracting fiber that were produced by relatively small sinusoidal length changes at the other end. The amplitudes of the sinusoidal length changes were small compared with the size of step changes that produce nonlinear force-extension relations. The sinusoids of force from long fibers changed amplitude and shifted phase with changes in oscillation frequency in a manner expected of a transmission line composed of mass, compliance, and viscosity, similar to that modelled by (Ford, L. E., A. F. Huxley, and R. M. Simmons, 1981, J. Physiol. (Lond.), 311:219-249). A rapid release during the plateau of tetanic tension in short fibers caused a fall in force and stiffness, a relative change in stiffness that putatively was much smaller than that of force. Our results are, for the most part, consistent with the cross-bridge model of force generation proposed by Huxley, A. F., and R. M. Simmons (1971, Nature (Lond.), 213:533-538). However, stiffness in short fibers developed markedly faster than force during the tetanus rise. Thus our findings show the presence of one or more noteworthy cross-bridge states at the onset and during the rise of active tension towards a plateau in that attachment apparently is followed by a relatively long delay before force generation occurs.(ABSTRACT TRUNCATED AT 400 WORDS)     

Three-dimensional structure of bacteriophage T4 baseplate

The baseplate of bacteriophage T4 is a multiprotein molecular machine that controls host cell recognition, attachment, tail sheath contraction and viral DNA ejection. We report here the three-dimensional structure of the baseplate-tail tube complex determined to a resolution of 12 A by cryoelectron microscopy. The baseplate has a six-fold symmetric, dome-like structure approximately 520 A in diameter and approximately 270 A long, assembled around a central hub. A 940 A-long and 96 A-diameter tail tube, coaxial with the hub, is connected to the top of the baseplate. At the center of the dome is a needle-like structure that was previously identified as a cell puncturing device. We have identified the locations of six proteins with known atomic structures, and established the position and shape of several other baseplate proteins. The baseplate structure suggests a mechanism of baseplate triggering and structural transition during the initial stages of T4 infection.     

Structural characterization and assembly of the distal tail structure of the temperate lactococcal bacteriophage TP901-1

The tail structures of bacteriophages infecting gram-positive bacteria are largely unexplored, although the phage tail mediates the initial interaction with the host cell. The temperate Lactococcus lactis phage TP901-1 of the Siphoviridae family has a long noncontractile tail with a distal baseplate. In the present study, we investigated the distal tail structures and tail assembly of phage TP901-1 by introducing nonsense mutations into the late transcribed genes dit (orf46), tal(TP901-1) (orf47), bppU (orf48), bppL (orf49), and orf50. Transmission electron microscopy examination of mutant and wild-type TP901-1 phages showed that the baseplate consisted of two different disks and that a central tail fiber is protruding below the baseplate. Evaluation of the mutant tail morphologies with protein profiles and Western blots revealed that the upper and lower baseplate disks consist of the proteins BppU and BppL, respectively. Likewise, Dit and Tal(TP901-1) were shown to be structural tail proteins essential for tail formation, and Tal(TP901-1) was furthermore identified as the tail fiber protein by immunogold labeling experiments. Determination of infection efficiencies of the mutant phages showed that the baseplate is fundamental for host infection and the lower disk protein, BppL, is suggested to interact with the host receptor. In contrast, ORF50 was found to be nonessential for tail assembly and host infection. A model for TP901-1 tail assembly, in which the function of eight specific proteins is considered, is presented.     

Evidence for an internal component of the bacteriophage T4D tail core: a possible length-determining template.

The length of the T4 tail is precisely regulated in vivo at the time of polymerization of the tail core protein onto the baseplate. Since no mutations which alter tail length have been identified, a study of in vivo-assembled tail cores was begun to determine whether the structural properties of assembled cores would reveal the mechanism of length regulation. An assembly intermediate consisting of a core attached to a baseplate (core-baseplate) was purified from cells infected with a T4 mutant in gene 15. When core-base plates were treated with guanidine hydrochloride, cores were released from baseplates. The released cores had the same mean length as cores attached to baseplates. Electron micrographs of these cores showed partial penetration of negative stain into one end, and, at the opposite end, a modified tip which often appeared as a short fiber projecting from the core. When cores were purified and analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, two minor proteins and the major core protein were detected. One minor protein, the product of gene 48 (gp48), was present in at least 72% of the amount found in core-baseplates, relative to the amount of the major core protein. These findings suggest that cores contain a fibrous structure, possibly composed of gp48, which may form a "ruler" that specifies the length of the T4 tail.     

Defective pyocin particles produced by some mutant strains of Pseudomonas aeruginosa.

Mutants of Pseudomonas aeruginosa, defective in the production of active R-type pyocins, were isolated from pyocinogenic strains and their products were characterized. Polysheath-like structures were found in induced lysates of 29 out of 42 mutants. Two mutants (strain P15-16 and M189) were found to produce special defective particles, which were characterized in detail. The other 11 mutants did not produce significant amounts of any structure visible under an electron microscope. Serum blocking powers were found in lysates from P15-16 and M189 to significant amounts. Defective particle produced by strain P15-16 lacked the sheath component, whereas M189 had morphological defects at the junction between sheath and baseplate, and also in the architecture of baseplate. Both defective particles could adsorb to the surface of bacteria, that were sensitive to pyocin, at the tip of their fibers without killing cells. All M189 particles attached to the bacteria had the extended sheaths. Therefore, attachment to the bacteria by fibers is not sufficient to kill cells, and contraction of sheath must occur after the initial adsorption by fibers for pyocin to express its biological activity. Defective particles of strain P15-16, which was derived from strain P15 (a pyocin R1 producer), could be converted to active forms by an in vitro complementation reaction with extracts from certain mutants originated from strain PAO (a pyocin R2 producer). This result indicated the exchangeability of components between R-type pyocins belonging to the different groups.     

Evolution of bacteriophage tails: Structure of T4 gene product 10

The success of tailed bacteriophages to infect cells far exceeds that of most other viruses on account of their specialized tail and associated baseplate structures. The baseplate protein gene product (gp) 10 of bacteriophage T4, whose structure was determined to 1.2 A resolution, was fitted into the cryo-electron microscopy structures of the pre and post-infection conformations of the virus. gp10 functions as a molecular lever that rotates and extends the hinged short tail fibers to facilitate cell attachment. The central folding motif of the gp10 trimer is similar to that of the baseplate protein gp11 and to the receptor-binding domain of the short tail fiber, gp12. The three proteins comprise the periphery of the baseplate and interact with each other. The structural and functional similarities of gp10, gp11, and gp12 and their sequential order in the T4 genome suggest that they evolved separately, subsequent to gene triplication from a common ancestor. Such events are usual in the evolution of complex organelles from a common primordial molecule.     

Properties of bacteriophage T4 modified with cetyltrimethylammonium bromide

Treating of the bacteriophage T4B with cetyltrimethylammonium bromide results in extension of long fibers and contraction of tail sheaths. The unreorganized hexagonal baseplate attachment to the distal end of the tail core remains intact. Such aberrantly contracted phages are shown to retain the ability to absorb on the bacterial surface. The absorption is inhibited by sucrose and does not require the presence of 1-tryptophan. The aberrantly contracted phages lose the infection ability.