Ladder webs in orb‐web spiders: ontogenetic and evolutionary patterns in Nephilidae

Spider web research bridges ethology, ecology, functional morphology, material science, development, genetics, and evolution. Recent work proposes the aerial orb web as a one‐time key evolutionary innovation that has freed spider‐web architecture from substrate constraints. However, the orb has repeatedly been modified or lost within araneoid spiders. Modifications include not only sheet‐ and cobwebs, but also ladder webs, which secondarily utilize the substrate. A recent nephilid species level phylogeny suggests that the ancestral nephilid web architecture was an arboricolous ladder and that round aerial webs were derived. Because the web biology of the basalmost Clitaetra and the derived Nephila are well understood, the present study focuses on the webs of the two phylogenetically intervening genera, Herennia and Nephilengys, to establish ontogenetic and macroevolutionary patterns across the nephilid tree. We compared juvenile and adult webs of 95 Herennia multipuncta and 143 Nephilengys malabarensis for two measures of ontogenetic allometric web changes: web asymmetry quantified by the ladder index, and hub asymmetry quantified by the hub displacement index. We define a ‘ladder web’ as a vertically elongated orb exceeding twice the length over width (ladder index ≥ 2) and possessing (sub)parallel rather than round side frames. Webs in both genera allometrically grew from orbs to ladders, more so in Herennia. Such allometric web growth enables the spider to maintain its arboricolous web site. Unexpectedly, hub asymmetry only increased significantly in heavy‐bodied Nephilengys females, and not in Herennia, challenging the commonly invoked gravity hypothesis. The findings obtained in the present study support the intrageneric uniformness of nephilid webs, with Herennia etruscilla webs being identical to H. multipuncta. The nephilid web evolution suggests that the ancestor of Nephila reinvented the aerial orb web because the orb arises at a much more inclusive phylogenetic level, and all intervening nephilids retained the secondarily acquired substrate‐dependent ladder web. © 2010 The Linnean Society of London, Biological Journal of the Linnean Society, 2010, 99 , 849–866.     

A new view of orb webs: multiple trap designs in a single structure

Spider orb webs are impressive for their apparently uniform geometric patterns. There are, however, consistent, substantial and taxonomically widespread periphery‐to‐hub differences in the distances between both adjacent radii and between sticky spiral lines. Radii in typical orbs were on average about 4–5 times farther apart at the outer edge than the inner edge of the area covered by sticky lines. Distances between sticky spiral loops were on average about two times larger near the outer edge than in more inner portions. This pattern in sticky spiral spacing was absent in the modified orbs of Nephila clavipes, in which distances between radii varied less. Thus, patterns in sticky spiral spacing may be related to inter‐radial spacing; there is, however, probably no single explanation for all of the different patterns of sticky spiral spacing. The patterned differences in radius and sticky spiral spacing have important consequences for understanding orb function, because the lines in a prey's immediate vicinity largely determine whether it will be stopped and then retained, and elementary physics dictates that contact with more lines will tend to increase prey being stopped and retained. Rather than being a unit trap with a single set of prey capture properties, an orb has locally different trapping properties in different sectors. Abandoning the previous typological style of discussion of ‘the’ ability of a given design to stop and retain prey promises to lead to improved understanding of orb web designs. Published 2014. This article is a U.S. Government work and is in the public domain in the USA, Biological Journal of the Linnean Society, 2014, 111 , 437–449.     

Design features of the orb web of the spider, Araneus diadematus

Analysis of orb webs of the garden cross spider (Araneus diadematus)showed that these vertical webs have a significant up/down asymmetry.Experiments demonstrated that the spider runs down faster thanup, and thus confers a relatively higher foraging value to sectionsbelow the hub. Simulations suggested that the density of capturespiral spacing, prey size, and the density of prey should allaffect the capture efficiency of a web. Webs lose effectivecapture area because of overlap of the capture zone around eachthread; the smaller the prey, the finer the mesh can be withoutlosing effective area. Lower sectors of the web have a particularmesh size (height and length of capture spiral segments) throughout,whereas in the upper sectors the mesh size changes, wideningfrom the hub towards the periphery.     

Cues that Spiders (Araneae: Araneidae,Tetragnathidae) Use to Build Orbs: Lapses in Attention to One Set of Cues because of Dissonance with Others?

Even for small animals such as spiders, behavioral decisions are sometimes influenced by multiple cues. Orb webs constitute exquisitely precise records of the stimuli the spider experienced and the decisions that it made while building its web. In addition, because spiders appear to sense their webs largely by touch, direct behavioral observations can determine which stimuli they probably sense. Previous studies have shown that when an orb‐weaving spider decides how far apart to space successive sticky lines during orb construction, it responds to at least five different kinds of stimuli, all of which apparently use a cue from the web, the location of the previous, inner loop of sticky spiral (IL location), as a point of reference. Here we show that two additional cues from the web, which are related to the position of the temporary spiral (TS), also influence sticky spiral spacing. A combination of direct observations of spider movements, analyses of complete and partially complete webs, and responses to experimental modifications of the web of two species in different families, Micrathena duodecimspinosa (Araneidae) and Leucauge mariana (Tetragnathidae), indicate that both the TS‐IL distance itself and the short‐term memory of the change in TS‐IL distance compared with that on other recently encountered radii correlate with sticky spiral spacing. When the TS‐IL distance was large, the spiders apparently ceased to attend to other cues. Thus, even the relatively stereotyped behavior of orb construction includes variation that stems from attention‐like mental processes.     

Polenecia producta and its web: structure and evolution (Araneae,Uloboridae)

Summary The web of Polenecia producta is interpreted as being a modified orb web. The position of the hub directly upon a twig amongst irregularly placed branches decides the web's structure. Since the radii have to be fixed in the vicinity corresponding to the local possibilities, and since these possibilities vary very much from case to case, a great variety of web scaffoldings results. All of them are characterized by a lack of symmetry. These asymmetries, for their part, prevent the production of capture threads by circling around and fixing them obliquely to the radii as do orb weavers. P. producta adapts itself to this situation by attaching the adhesive material along the radii. Under these circumstances temporary spirals, like those of orb weavers, would be without function. The short pieces of such spirals present in the webs of P. producta are interpreted as vestiges of once functional structures. The silk deposits P. producta lays down upon the hub can, in certain respects, be compared with stabilimenta of other Uloboridae. The relatively late onset of web building in P. producta (instar II spiderlings) is related to the ontogeny of the spinning apparatus.     

Forces in the spider orb web

Summary Pretensile forces were measured in individual threads of intact spider webs. In the orb web of Araneus diadematus forces decrease from mooring threads to frame threads and radii, a typical ratio being 1071. The smaller number of radii in the upper than in the lower half of the orb is paralleled by force ratios of 21 to 31. A similar difference between radii built first during web construction and radii added after completion of the frame underlines the importance of the former as part of the scaffolding. High tensions in the auxiliary spiral stabilize the radii in addition to providing a pathway for the spider when inserting the sticky spiral. Radial pretension (F) changes with spider mass (m). F/m is similar for different animals indicating an adaptation of radial forces to those resulting from spider mass. Several observations suggest tension control by the spider. When forced to anchor its web to thin flexible rods tension in the threads remains in the normal range. Tension values are similar in the webs of A. diadematus, Zygiella x-notata, Nuctenea umbratica, and Nephila clavipes indicating independence from details of web geometry. Only the mooring threads of Nephila show unusually large forces suggesting a narrower working range of tensions for the catching area than for the scaffolding.     

Upside-down spiders build upside-down orb webs: web asymmetry,spider orientation and running speed in Cyclosa

Almost all spiders building vertical orb webs face downwards when sitting on the hubs of their webs, and their webs exhibit an up–down size asymmetry, with the lower part of the capture area being larger than the upper. However, spiders of the genus Cyclosa, which all build vertical orb webs, exhibit inter- and intraspecific variation in orientation. In particular, Cyclosa ginnaga and C. argenteoalba always face upwards, and C. octotuberculata always face downwards, whereas some C. confusa face upwards and others face downwards or even sideways. These spiders provide a unique opportunity to examine why most spiders face downwards and have asymmetrical webs. We found that upward-facing spiders had upside-down webs with larger upper parts, downward-facing spiders had normal webs with larger lower parts and sideways-facing spiders had more symmetrical webs. Downward-facing C. confusa spiders were larger than upward- and sideways-facing individuals. We also found that during prey attacks, downward-facing spiders ran significantly faster downwards than upwards, which was not the case in upward-facing spiders. These results suggest that the spider''s orientation at the hub and web asymmetry enhance its foraging efficiency by minimizing the time to reach prey trapped in the web.     

蜘蛛位置对成功捕获猎物和球型网图案的影响

静坐在球型网的中心,蜘蛛可能遭受天敌的攻击并暴露在不利的天气条件下,如风和雨。然而,栖居于网的中心使蜘蛛比隐藏在隐蔽场所中的蜘蛛能更迅速地察觉并捕获猎物,这是因为猎物的位置仅能被位于网中心的蜘蛛所确定。对在隐蔽场所中的蜘蛛而言,提高对猎物捕获率的方式之一是尽量减少隐蔽所与网中心的距离。而且,网中心与隐蔽所之间较短的距离使蜘蛛能更迅速地逃离危险境况。我使用既在网中心、又在隐蔽场所的硬类肥蛛(Larinioides sclopetarius Clerck),来检验这两种行为如何影响对猎物的捕获成功率。隐藏在隐蔽场所中的蜘蛛更经常忽略猎物,使猎物也有比较多的逃离机会,这样,与在网中心的蜘蛛相比,猎物的损失率就更高。另外,研究了隐蔽场所的位置对球型网图案的影响。在大多数球型网中,网中心上方的区域比网下方小,丝也比较少,形成了结构不对称的网;隐蔽场所通常在网的上方。当隐蔽场所的位置在实验中被倒转时,就形成了非典型的球型网。最后,L．sclopetarius建造的网有很突出的边缘非对称性,与隐蔽场所相邻的区域面积较小,而远离隐蔽场所的区域面积较大,这也可解释为减少了隐蔽场所和网中心之间的距离[动物学报50(4)：559-565．2004]。     

Environmentally induced post‐spin property changes in spider silks: influences of web type,spidroin composition and ecology

Many spiders use silk to construct webs that must function for days at a time, whereas many other species renew their webs daily. The mechanical properties of spider silk can change after spinning under environmental stress, which could influence web function. We hypothesize that spiders spinning longer‐lasting webs produce silks composed of proteins that are more resistant to environmental stresses. The major ampullate (MA) silks of orb web spiders are principally composed of a combination of two proteins (spidroins) called MaSp1 and MaSp2. We expected spider MA silks dominated by MaSp1 to have the greatest resistance to post‐spin property change because they have high concentrations of stable crystalline β‐sheets. Some orb web spiders that spin three‐dimensional orb webs, such as Cyrtophora, have MA silks that are predominantly composed of MaSp1. Hence, we expected that the construction of three‐dimensional orb webs might also coincide with MA silk resistance to post‐spin property change. Alternatively, the degree of post‐spin mechanical property changes in different spider silks may be explained by factors within the spider's ecosystem, such as exposure to solar radiation. We exposed the MA silks of ten spider species from five genera (Nephila, Cyclosa, Leucauge, Cyrtophora, and Argiope) to ecologically high temperatures and low humidity for 4 weeks, and compared the mechanical properties of these silks with unexposed silks. Using species pairs enabled us to assess the influence of web dimensionality and MaSp composition both with and without phylogenetic influences being accounted for. We found neither the MaSp composition nor the three‐dimensionality of the orb web to be associated with the degree of post‐spin mechanical property changes in MA silk. The MA silks in Leucauge spp. are dominated by MaSp2, which we found to have the least resistance to post‐spin property change. The MA silk in Argiope spp. is also dominated by MaSp2, but has high resistance to post‐spin property change. The ancestry of Argiope is unresolved, but it is largely a tropical genus inhabiting hot, open regions that present similar stressors to silk as those of our experiment. Ecological factors thus appear to influence the vulnerability of orb web spider MA silks to post‐spin property change. © 2012 The Linnean Society of London, Biological Journal of the Linnean Society, 2012, 106 , 580–588.     

Asymmetry in spider orb webs: a result of physical constraints?

A typical feature of most vertical orb webs is that the upper web region is smaller and contains less silk than the lower web region, creating an asymmetrical web. The degree of web asymmetry changes during the spider's development: small juveniles construct more symmetrical webs, but older and larger individuals decrease the upper web region. This implies that weight may control the extent of web asymmetry. Using two species, Argiope keyserlingi and Larinioides sclopetarius, we tested the effect of weight increase on web asymmetry by naturally increasing weight through feeding and by artificially adding lead weights to the abdomen of the spiders. Weight increase (natural or artificial) resulted in more asymmetric webs through a reduction of the upper web region. Added weight may interfere with spiral placement in the upper region, because the spider has to lift its abdomen above the carapace during the process. In the lower region, however, the position of the spider is mostly head up during spiral placement. Therefore, amongst other factors, weight and gravitational forces may be physical constraints during web construction. Copyright 1999 The Association for the Study of Animal Behaviour.     

Fine structure of sheet-webs of Linyphia triangularis (Clerck) and Microlinyphia pusilla (Sundevall), with remarks on the presence of viscid silk

We examined the webs of Linyphia triangularis (Clerck) and Microlinyphia pusilla (Sundevall) using light and scanning electronic microscopic techniques and compared them with the better known orb‐webs. The linyphiid sheet‐web consists of an unordered meshwork of fibres of different thicknesses. The sheet is connected to the scaffolding by means of attachment discs. Thin threads with globules, which appear similar to the viscid silk droplets of orb‐webs, are present in most webs examined. Webs of M. pusilla had a higher density of these globules than did webs of L. triangularis. Webs of both species possess five types of thread connections and contain no aqueous glue for prey capture. Instead, unlike orb‐webs, the sticky substances produced by the linyphiid aggregate glands cement the different layers and threads of the sheet by drying up after being produced. Due to their function, sheet webs may not require viscid silk, thereby leading to a more economic web. The assumption made in most previous studies, that the globules in linyphiid webs have the same properties and function as viscid silk in orb‐webs, is unfounded.     

The ecological and evolutionary interdependence between web architecture and web silk spun by orb web weaving spiders

Spider orb webs are dynamic, energy absorbing nets whose ability to intercept prey is dependent on both the mechnical properties of web design and the material properties of web silks. Variation in web designs reflects variation in spider web spinning behaviours and variation in web silks reflects variation in spider metabolic processes. Therefore, natural selection may affect web function (or prey capture) through two independent and alternative pathways. In this paper, I examine the ways in which architectural and material properties, singly and in concert, influence the ability of webs to absorb insect impact energy. These findings are evaluated in the context of the evolution of diverse aerial webs. Orb webs range along a continuum from high to low energy absorbing. No single feature of web architecture characterizes the amount of energy webs can absorb, but suites of characters indicate web function. In general, webs that intercept heavy and fast flying prey (high energy absorbing webs) are large, built by large spiders, suspended under high tension and characterized by a ratio of radii to spiral turns per web greater than one. In contrast, webs that intercept light and slow flying prey (low energy absorbing webs) are suspended under low tension, are small and are characterized by radial to spiral turn ratios that are less than one. The data suggest that for spiders building high energy absorbing webs, the orb architecture contributes much to web energy absorption. In contrast, for spiders that build low energy absorbing webs, orb architecture contributes little to enhance web energy absorption. Small or slow flying insects can be intercepted by web silks regardless of web design. Although there exists variation in the material properties of silk collected from high and low energy absorbing webs, only the diameter of web fibres varies predictably with silk energy absorption. Web fibre diameter and hence the amount of energy absorbed by web silks is an isometric function of spider size. The significance of these results lies in the apparent absence of selective advantage of orb architecture to low energy absorbing webs and the evolutionary trend to small spiders that build them. Where high energy absorption is not an exacting feature of web design, web architecture should not be tightly constrained to the orb. Assuming the primitive araneoid web design is the orb web, I propose that the evolution of alternative web building behaviours is a consequence of the general, phyletic trend to small size among araneoids. Araneoids that build webs of other than orb designs are able to use new habitats and resources not available to their ancestors.     

Developmental changes in barrier web structure under different levels of predation risk inNephila clavipes (Araneae: Tetragnathidae)

Individuals of the orb-weaving spider Nephila clavipesbuild complex webs with a region used for prey capture, the orb, and tangle webs opposite either face, the barrier webs. Barrier webs have been hypothesized to serve a variety of functions, including predator defense, and the primary function of the barrier web should be reflected in the relative size of the barrier to the orb under varying conditions of foraging success and predation risk. To investigate the effects of predation pressure and foraging success on barrier web structure, I conducted a comparative study in three disjunct populations that differed in predation risk and foraging success. Although both the orb web and the barrier webs are silk, there was no indication of a foraging-defense trade-off. Barrier web structure did not change during seasonal shifts in orb web size related to changes in preycapture rate, and barrier web silk density and orb radius were positively correlated. The hypothesis that the construction of barrier webs is in part a response to predation pressure was supported. Barrier webs do deflect attacks by some predators, and barrier webs built by small spiders, suffering frequent predation attempts, had a higher silk density than barrier webs built by larger individuals. Additionally, barrier web complexity decreased at a later age in areas with higher predation risk.     

The phylogenetic placement of Psechridae within Entelegynae and the convergent origin of orb‐like spider webs

Evolutionary convergence of phenotypic traits provides evidence for their functional success. The origin of the orb web was a critical event in the diversification of spiders that facilitated a spectacular radiation of approximately 12 000 species and promoted the evolution of novel web types. How the orb web evolved from ancestral web types, and how many times orb‐like architectures evolved in spiders, has been debated for a long time. The little known spider genus Fecenia (Psechridae) constructs a web that resembles the archetypical orb web, but morphological data suggest that Psechridae (Psechrus + Fecenia) does not belong in Orbiculariae, the ‘true orb weavers’, but to the ‘retrolateral tibial apophysis (RTA) clade’ consisting mostly of wandering spiders, but also including spiders building less regular webs. Yet, the data are sparse and no molecular phylogenetic study has estimated Fecenia's exact position in the tree of life. Adding new data to sequences pulled from GenBank, we reconstruct a phylogeny of Entelegynae and phylogenetically test the monophyly and placement of Psechridae, and in doing so, the alternative hypotheses of monophyletic origin of the orb web and the pseudo‐orb versus their independent origins, a potentially spectacular case of behavioural convergence. We also discuss the implications of our results for Entelegynae systematics. Our results firmly place a monophyletic Psechridae within the RTA clade, phylogenetically distant from true orb weavers. The architectural similarities of the orb and the pseudo‐orb are therefore clearly convergent, as also suggested by detailed comparisons of these two web types, as well as the spiders' web‐building behaviours and ontogenetic development. The convergence of Fecenia webs with true orbs provides a remarkable opportunity to investigate how these complex sets of traits may have interacted during the evolution of the orb.     

Behavioural and biomaterial coevolution in spider orb webs

Mechanical performance of biological structures, such as tendons, byssal threads, muscles, and spider webs, is determined by a complex interplay between material quality (intrinsic material properties, larger scale morphology) and proximate behaviour. Spider orb webs are a system in which fibrous biomaterials—silks—are arranged in a complex design resulting from stereotypical behavioural patterns, to produce effective energy absorbing traps for flying prey. Orb webs show an impressive range of designs, some effective at capturing tiny insects such as midges, others that can occasionally stop even small birds. Here, we test whether material quality and behaviour (web design) co‐evolve to fine‐tune web function. We quantify the intrinsic material properties of the sticky capture silk and radial support threads, as well as their architectural arrangement in webs, across diverse species of orb‐weaving spiders to estimate the maximum potential performance of orb webs as energy absorbing traps. We find a dominant pattern of material and behavioural coevolution where evolutionary shifts to larger body sizes, a common result of fecundity selection in spiders, is repeatedly accompanied by improved web performance because of changes in both silk material and web spinning behaviours. Large spiders produce silk with improved material properties, and also use more silk, to make webs with superior stopping potential. After controlling for spider size, spiders spinning higher quality silk used it more sparsely in webs. This implies that improvements in silk quality enable ‘sparser’ architectural designs, or alternatively that spiders spinning lower quality silk compensate architecturally for the inferior material quality of their silk. In summary, spider silk material properties are fine‐tuned to the architectures of webs across millions of years of diversification, a coevolutionary pattern not yet clearly demonstrated for other important biomaterials such as tendon, mollusc byssal threads, and keratin.     

Manipulation of araneid spider web architecture by the polysphinctine parasitoid Zatypota picticollis (Hymenoptera: Ichneumonidae: Pimplinae)

We found that the koinobiont ectoparasitoid wasp Zatypota picticollis is exclusively associated with three orb weaving spiders Cyclosa conica, Mangora acalypha and Zilla diodia from the family Araneidae. Under the influence of the parasitoid's final instar larva the spiders built a specific web architecture, which differed considerably from the capturing orb web. Manipulated webs of C. conica and M. acalypha lacked the spiral, stabilimentum and central hub, and the radials were reduced in number. The manipulated web of Z. diodia consisted of one strong horizontally oriented thread.     

Mesh Width Influences Prey Retention in Spider Orb Webs

Orb‐weaving spiders depend upon the sticky capture spirals of webs to retain insects long enough to be captured. However, insects often escape from orb webs before the spiders can attack them. Therefore, the architectures of orb webs likely reflect strong selective pressure to increase retention times of insects. We experimentally increased the mesh width of one side of an orb web while maintaining the original mesh width on the other side as a control, and then tested the effect of this manipulation on the retention times of four different taxa of insects. We found evidence that increased mesh width of Argiope aurantia orb webs resulted in a general reduction in the retention times of insects. However, retention times for different taxa of insects were not predicted by any one specific morphological or flight characteristic. The influence of mesh width on the retention times of insects is very complex, but our results suggest that mesh width can act to selectively favor the capture of certain taxa of insect prey over others. This effect may help to explain both species level differences in web‐building behaviors and variation in the architectures of webs spun by individual spiders on different days.     

Gravity as an orientation guide during web-construction in the orb spiderAraneus diadematus (Araneae,Araneidae)

summary The effect of gravity on the web building behaviour of the common garden spiderAraneus diadematus was studied in three ways: (i) frames with partially completed vertical webs were swivelled into a horizontal position, (ii) by rotating frames with spiders in a vertical klinostat (1 rpm), and (iii) by vertically rotating a partially completed web treadmill fashion keeping the building animal in a certain position in space.(i) In the horizontal, radial wheels are not constructed, however, a more or less irregular spiral is added to a completed wheel; (ii) in the klinostat the radial wheel lacks the up/down distinction of normal webs, and the spiral is irregular; (iii) in the treadmill the spiral course is abnormal, and the degree of deviation depends on the position of the animal. If the body axis is parallel to gravity the spiral path deviates to both sides of the norm. In ag perpendicular body position the path deviates predominantly to one side, spiralling sharply inwards towards the hub. The observations suggest that the cyclic changes in the body position of spiral-buildingAraneus are an important component of the animal's orientation during this phase of web-construction.     

Effect of abiotic factors on the foraging strategy of the orb‐web spider Argiope keyserlingi (Araneae: Araneidae)

Abstract Environmental conditions such as light level, background contrast and temperature might influence a spider's prey capture success and risk of predation. Thus it may often be advantageous for spiders to adjust web‐building behaviour in response to variation in these environmental conditions. This hypothesis was examined in a study of the construction of webs and web decorations (conspicuous strands of silk at the hub of the web) of the orb‐web spider Argiope keyserlingi. Web decorations are thought to have one or more separate functions. They may attract prey, deter predators or advertise the web to oncoming birds, thus preventing web damage. In this series of experiments, relationships between weather parameters and the construction of webs and web decorations were considered. In complementary laboratory experiments, A. keyserlingi spiders were exposed to two different light levels (700 and 90 lx), background contrasts (black and white) and temperature conditions (20 and 26°C). Of the available weather parameters, only temperature was significantly related to web decorating behaviour but not to web size. In the laboratory, temperature also influenced web‐decorating behaviour, and spiders in dim light (700 lx) constructed larger webs and longer decorations. Background contrast did not significantly alter web size or web decorations. These data suggest that when prey availability is reduced at low temperatures, spiders may use web decorations to attract prey to the web. Similarly, in dim light, spiders may build more and larger decorations to increase the visual signal to approaching prey or to advertise the web to oncoming birds.     

Small Organic Solutes in Sticky Droplets from Orb Webs of the Spider Zygiella atrica (Araneae; Araneidae): β‐Alaninamide Is a Novel and Abundant Component

In northeastern North America, Zygiella atrica often build their orb webs near the ocean. We analyzed individual field‐built Z. atrica webs to determine if organic low‐molecular‐mass solutes (LMM) in their sticky droplets showed any unusual features not previously seen in orb webs of other species living in less salty environments. While two of the three most abundant organic LMM (putrescine (butane‐1,4‐diamine) and GABamide (4‐aminobutanamide)) are already well‐known from webs of inland spiders, the third major LMM, β‐alaninamide (3‐aminopropanamide), a homolog of GABamide, has not been detected in sticky droplets from any other araneoid spiders (27 species). It remains to be established, however, whether or not use of β‐alaninamide is related to proximity to saltwater. We observed variability in organic LMM composition in Z. atrica webs that appeared to be influenced more by an undetermined factor associated with different collecting locations and/or collection dates than by different genders or instars. Shifts in composition when adult females were transferred from the field to the laboratory were also observed. Structural similarities and inverse correlations among β‐alaninamide, GABamide, and N‐acetylputrescine suggest that they may form a series of LMM fulfilling essentially the same, as yet unknown, role in the webs of those species in which they occur.