A method for solution NMR structural studies of large integral membrane proteins: Reverse micelle encapsulation

The structural study of membrane proteins perhaps represents one of the greatest challenges of the post-genomic era. While membrane proteins comprise over 50% of current and potential drug targets, their structural characterization lags far behind that of soluble proteins. Nuclear magnetic resonance (NMR) offers great potential not only with respect to structural characterization of integral membrane proteins but may also provide the ability to study the details of small ligand interactions. However, the size limitations of solution NMR have restricted comprehensive structural characterization of membrane protein NMR structures to the relatively small β-barrel proteins or helical proteins of relatively simple topology. In an effort to escape the barriers presented by slow molecular reorientation of large integral membrane proteins solubilized by detergent micelles in water, we have adapted the reverse micelle encapsulation strategy originally developed for the study of large soluble proteins by solution NMR methods. Here we review a novel approach to the solubilization of large integral membrane proteins in reverse micelle surfactants dissolved in low viscosity alkane solvents. The procedure is illustrated with a 54 kDa construct of the homotetrameric KcsA potassium channel.     

Backbone 1H, 13C and 15N resonance assignments of the α-helical membrane protein TM0026 from Thermotoga maritima

Critical to the use of solution NMR to describe the structure and flexibility of membrane proteins is the thorough understanding of the degree of perturbation induced by the detergent or other membrane mimetic. To develop a deeper understanding of the interaction between membrane proteins and micelles or bicelles, we will investigate the differences in structure and flexibility of a model membrane protein TM0026 from Thermotoga maritima using solution NMR. A comparison of the structural differences between TM0026 solubilized in different detergent combinations will provide important insight into the degree of modulation of membrane proteins by detergent physical properties. Here we report the nearly complete backbone and C_β resonance assignments of the two transmembrane helical model protein TM0026. These assignments are the first step to using TM0026 to elucidate the interaction between membrane proteins and membrane mimetics.     

NMR of membrane proteins in micelles and bilayers: the FXYD family proteins

Determining the atomic resolution structures of membrane proteins is of particular interest in contemporary structural biology. Helical membrane proteins constitute one-third of the expressed proteins encoded in a genome, many drugs have membrane-bound proteins as their receptors, and mutations in membrane proteins result in human diseases. Although integral membrane proteins provide daunting technical challenges for all methods of protein structure determination, nuclear magnetic resonance (NMR) spectroscopy can be an extremely versatile and powerful method for determining their structures and characterizing their dynamics, in lipid environments that closely mimic the cell membranes. Once milligram amounts of isotopically labeled protein are expressed and purified, micelle samples can be prepared for solution NMR analysis, and lipid bilayer samples can be prepared for solid-state NMR analysis. The two approaches are complementary and can provide detailed structural and dynamic information. This paper describes the steps for membrane protein structure determination using solution and solid-state NMR. The methods for protein expression and purification, sample preparation and NMR experiments are described and illustrated with examples from the FXYD proteins, a family of regulatory subunits of the Na,K-ATPase.     

Solid-state NMR structures of integral membrane proteins

Abstract

Solid-state NMR is unique for its ability to obtain three-dimensional structures and to measure atomic-resolution structural and dynamic information for membrane proteins in native lipid bilayers. An increasing number and complexity of integral membrane protein structures have been determined by solid-state NMR using two main methods. Oriented sample solid-state NMR uses macroscopically aligned lipid bilayers to obtain orientational restraints that define secondary structure and global fold of embedded peptides and proteins and their orientation and topology in lipid bilayers. Magic angle spinning (MAS) solid-state NMR uses unoriented rapidly spinning samples to obtain distance and torsion angle restraints that define tertiary structure and helix packing arrangements. Details of all current protein structures are described, highlighting developments in experimental strategy and other technological advancements. Some structures originate from combining solid- and solution-state NMR information and some have used solid-state NMR to refine X-ray crystal structures. Solid-state NMR has also validated the structures of proteins determined in different membrane mimetics by solution-state NMR and X-ray crystallography and is therefore complementary to other structural biology techniques. By continuing efforts in identifying membrane protein targets and developing expression, isotope labelling and sample preparation strategies, probe technology, NMR experiments, calculation and modelling methods and combination with other techniques, it should be feasible to determine the structures of many more membrane proteins of biological and biomedical importance using solid-state NMR. This will provide three-dimensional structures and atomic-resolution structural information for characterising ligand and drug interactions, dynamics and molecular mechanisms of membrane proteins under physiological lipid bilayer conditions.     

TROSY and CRINEPT: NMR with large molecular and supramolecular structures in solution

TROSY and CRINEPT are new techniques for solution NMR studies of molecular and supramolecular structures. They allow the collection of high-resolution spectra of structures with molecular weights >100 kDa, significantly extending the range of macromolecular systems that can be studied by NMR in solution. TROSY has already been used to map protein-protein interfaces, to conduct structural studies on membrane proteins and to study nucleic acid conformations in multimolecular assemblies. These techniques will help us to investigate the conformational states of individual macromolecular components and will support de novo protein structure determination in large supramolecular structures.     

Measuring membrane protein bond orientations in nanodiscs via residual dipolar couplings

Membrane proteins are involved in numerous vital biological processes. To understand membrane protein functionality, accurate structural information is required. Usually, structure determination and dynamics of membrane proteins are studied in micelles using either solution state NMR or X‐ray crystallography. Even though invaluable information has been obtained by this approach, micelles are known to be far from ideal mimics of biological membranes often causing the loss or decrease of membrane protein activity. Recently, nanodiscs, which are composed of a lipid bilayer surrounded by apolipoproteins, have been introduced as a more physiological alternative than micelles for NMR investigations on membrane proteins. Here, we show that membrane protein bond orientations in nanodiscs can be obtained by measuring residual dipolar couplings (RDCs) with the outer membrane protein OmpX embedded in nanodiscs using Pf1 phage as an alignment medium. The presented collection of membrane protein RDCs in nanodiscs represents an important step toward more comprehensive structural and dynamical NMR‐based investigations of membrane proteins in a natural bilayer environment.     

Structure determination of α-helical membrane proteins by solution-state NMR: Emphasis on retinal proteins

The biochemical processes of living cells involve a numerous series of reactions that work with exceptional specificity and efficiency. The tight control of this intricate reaction network stems from the architecture of the proteins that drive the chemical reactions and mediate protein–protein interactions. Indeed, the structure of these proteins will determine both their function and interaction partners. A detailed understanding of the proximity and orientation of pivotal functional groups can reveal the molecular mechanistic basis for the activity of a protein. Together with X-ray crystallography and electron microscopy, NMR spectroscopy plays an important role in solving three-dimensional structures of proteins at atomic resolution. In the challenging field of membrane proteins, retinal-binding proteins are often employed as model systems and prototypes to develop biophysical techniques for the study of structural and functional mechanistic aspects. The recent determination of two 3D structures of seven-helical trans-membrane retinal proteins by solution-state NMR spectroscopy highlights the potential of solution NMR techniques in contributing to our understanding of membrane proteins. This review summarizes the multiple strategies available for expression of isotopically labeled membrane proteins. Different environments for mimicking lipid bilayers will be presented, along with the most important NMR methods and labeling schemes used to generate high-quality NMR spectra. The article concludes with an overview of types of conformational restraints used for generation of high-resolution structures of membrane proteins. This article is part of a Special Issue entitled: Retinal Proteins — You can teach an old dog new tricks.     

A refinement protocol to determine structure,topology, and depth of insertion of membrane proteins using hybrid solution and solid-state NMR restraints

To fully describe the fold space and ultimately the biological function of membrane proteins, it is necessary to determine the specific interactions of the protein with the membrane. This property of membrane proteins that we refer to as structural topology cannot be resolved using X-ray crystallography or solution NMR alone. In this article, we incorporate into XPLOR-NIH a hybrid objective function for membrane protein structure determination that utilizes solution and solid-state NMR restraints, simultaneously defining structure, topology, and depth of insertion. Distance and angular restraints obtained from solution NMR of membrane proteins solubilized in detergent micelles are combined with backbone orientational restraints (chemical shift anisotropy and dipolar couplings) derived from solid-state NMR in aligned lipid bilayers. In addition, a supplementary knowledge-based potential, E _z (insertion depth potential), is used to ensure the correct positioning of secondary structural elements with respect to a virtual membrane. The hybrid objective function is minimized using a simulated annealing protocol implemented into XPLOR-NIH software for general use. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Membrane Protein Structural Validation by Oriented Sample Solid-State NMR: Diacylglycerol Kinase

The validation of protein structures through functional assays has been the norm for many years. Functional assays perform this validation for water-soluble proteins very well, but they need to be performed in the same environment as that used for the structural analysis. This is difficult for membrane proteins that are often structurally characterized in detergent environments, although functional assays for these proteins are most frequently performed in lipid bilayers. Because the structure of membrane proteins is known to be sensitive to the membrane mimetic environment, such functional assays are appropriate for validating the protein construct, but not the membrane protein structure. Here, we compare oriented sample solid-state NMR spectral data of diacylglycerol kinase previously published with predictions of such data from recent structures of this protein. A solution NMR structure of diacylglycerol kinase has been obtained in detergent micelles and three crystal structures have been obtained in a monoolein cubic phase. All of the structures are trimeric with each monomer having three transmembrane and one amphipathic helices. However, the solution NMR structure shows typical perturbations induced by a micelle environment that is reflected in the predicted solid-state NMR resonances from the structural coordinates. The crystal structures show few such perturbations, especially for the wild-type structure and especially for the monomers that do not have significant crystal contacts. For these monomers the predicted and observed data are nearly identical. The thermostabilized constructs do show more perturbations, especially the A41C mutation that introduces a hydrophilic residue into what would be the middle of the lipid bilayer inducing additional hydrogen bonding between trimers. These results demonstrate a general technique for validating membrane protein structures with minimal data obtained from membrane proteins in liquid crystalline lipid bilayers by oriented sample solid-state NMR.     

The use of osmolytes to facilitate protein NMR spectroscopy

Summary A method of stabilizing folded proteins is described, which allows NMR studies under conditions where a protein would normally be unfolded. This enables stable proteins to be examined at elevated temperatures, or spectra recorded on samples that are insufficiently stable under normal conditions. Up to two molar perdeuterated glycine, a potent osmolyte, can be added to aqueous protein NMR samples without altering the folded three-dimensional structure or function of the protein. However, the stability of the folded form is dramatically increased. This is illustrated for the protein lysozyme at high temperature (348 K) where the structural integrity is destroyed in standard aqueous solution, but is retained in the osmolyte solution. We hope that the technique will be of value to those studying by NMR the structural biology of protein fragments and mutants, which are often of reduced stability compared with the original proteins.To whom correspondence should be addressed.     

Drug screening strategy for human membrane proteins: From NMR protein backbone structure to in silica- and NMR-screened hits

About 8000 genes encode membrane proteins in the human genome. The information about their druggability will be very useful to facilitate drug discovery and development. The main problem, however, consists of limited structural and functional information about these proteins because they are difficult to produce biochemically and to study. In this paper we describe the strategy that combines Cell-free protein expression, NMR spectroscopy, and molecular DYnamics simulation (CNDY) techniques. Results of a pilot CNDY experiment provide us with a guiding light towards expedited identification of the hit compounds against a new uncharacterized membrane protein as a potentially druggable target. These hits can then be further characterized and optimized to develop the initial lead compound quicker. We illustrate such “omics” approach for drug discovery with the CNDY strategy applied to two example proteins: hypoxia-induced genes HIGD1A and HIGD1B.     

Comparison of NMR and crystal structures of membrane proteins and computational refinement to improve model quality

Membrane proteins are challenging to study and restraints for structure determination are typically sparse or of low resolution because the membrane environment that surrounds them leads to a variety of experimental challenges. When membrane protein structures are determined by different techniques in different environments, a natural question is “which structure is most biologically relevant?” Towards answering this question, we compiled a dataset of membrane proteins with known structures determined by both solution NMR and X‐ray crystallography. By investigating differences between the structures, we found that RMSDs between crystal and NMR structures are below 5 Å in the membrane region, NMR ensembles have a higher convergence in the membrane region, crystal structures typically have a straighter transmembrane region, have higher stereo‐chemical correctness, and are more tightly packed. After quantifying these differences, we used high‐resolution refinement of the NMR structures to mitigate them, which paves the way for identifying and improving the structural quality of membrane proteins.     

NMR structures of polytopic integral membrane proteins

Membrane proteins represent up to 30% of the proteins in all organisms, they are involved in many biological processes and are the molecular targets for around 50% of validated drugs. Despite this, membrane proteins represent less than 1% of all high-resolution protein structures due to various challenges associated with applying the main biophysical techniques used for protein structure determination. Recent years have seen an explosion in the number of high-resolution structures of membrane proteins determined by NMR spectroscopy, especially for those with multiple transmembrane-spanning segments. This is a review of the structures of polytopic integral membrane proteins determined by NMR spectroscopy up to the end of the year 2010, which includes both β-barrel and α-helical proteins from a number of different organisms and with a range in types of function. It also considers the challenges associated with performing structural studies by NMR spectroscopy on membrane proteins and how some of these have been overcome, along with its exciting potential for contributing new knowledge about the molecular mechanisms of membrane proteins, their roles in human disease, and for assisting drug design.     

Expression, purification, and characterization of Thermotoga maritima membrane proteins for structure determination

Structural studies of integral membrane proteins typically rely upon detergent micelles as faithful mimics of the native lipid bilayer. Therefore, membrane protein structure determination would be greatly facilitated by biophysical techniques that are capable of evaluating and assessing the fold and oligomeric state of these proteins solubilized in detergent micelles. In this study, an approach to the characterization of detergent-solubilized integral membrane proteins is presented. Eight Thermotoga maritima membrane proteins were screened for solubility in 11 detergents, and the resulting soluble protein-detergent complexes were characterized with small angle X-ray scattering (SAXS), nuclear magnetic resonance (NMR) spectroscopy, circular dichroism (CD) spectroscopy, and chemical cross-linking to evaluate the homogeneity, oligomeric state, radius of gyration, and overall fold. A new application of SAXS is presented, which does not require density matching, and NMR methods, typically used to evaluate soluble proteins, are successfully applied to detergent-solubilized membrane proteins. Although detergents with longer alkyl chains solubilized the most proteins, further characterization indicates that some of these protein-detergent complexes are not well suited for NMR structure determination due to conformational exchange and protein oligomerization. These results emphasize the need to screen several different detergents and to characterize the protein-detergent complex in order to pursue structural studies. Finally, the physical characterization of the protein-detergent complexes indicates optimal solution conditions for further structural studies for three of the eight overexpressed membrane proteins.     

Use of reverse micelles in membrane protein structural biology

Membrane protein structural biology is a rapidly developing field with fundamental importance for elucidating key biological and biophysical processes including signal transduction, intercellular communication, and cellular transport. In addition to the intrinsic interest in this area of research, structural studies of membrane proteins have direct significance on the development of therapeutics that impact human health in diverse and important ways. In this article we demonstrate the potential of investigating the structure of membrane proteins using the reverse micelle forming surfactant dioctyl sulfosuccinate (AOT) in application to the prototypical model ion channel gramicidin A. Reverse micelles are surfactant based nanoparticles which have been employed to investigate fundamental physical properties of biomolecules. The results of this solution NMR based study indicate that the AOT reverse micelle system is capable of refolding and stabilizing relatively high concentrations of the native conformation of gramicidin A. Importantly, pulsed-field-gradient NMR diffusion and NOESY experiments reveal stable gramicidin A homodimer interactions that bridge reverse micelle particles. The spectroscopic benefit of reverse micelle-membrane protein solubilization is also explored, and significant enhancement over commonly used micelle based mimetic systems is demonstrated. These results establish the effectiveness of reverse micelle based studies of membrane proteins, and illustrate that membrane proteins solubilized by reverse micelles are compatible with high resolution solution NMR techniques. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Comprehensive evaluation of solution nuclear magnetic resonance spectroscopy sample preparation for helical integral membrane proteins

The preparation of high quality samples is a critical challenge for the structural characterization of helical integral membrane proteins. Solving the structures of this diverse class of proteins by solution nuclear magnetic resonance spectroscopy (NMR) requires that well-resolved 2D ¹H/¹⁵N chemical shift correlation spectra be obtained. Acquiring these spectra demands the production of samples with high levels of purity and excellent homogeneity throughout the sample. In addition, high yields of isotopically enriched protein and efficient purification protocols are required. We describe two robust sample preparation methods for preparing high quality, homogeneous samples of helical integral membrane proteins. These sample preparation protocols have been combined with screens for detergents and sample conditions leading to the efficient production of samples suitable for solution NMR spectroscopy. We have examined 18 helical integral membrane proteins, ranging in size from approximately 9 kDa to 29 kDa with 1–4 transmembrane helices, originating from a number of bacterial and viral genomes. 2D ¹H/¹⁵N chemical shift correlation spectra acquired for each protein demonstrate well-resolved resonances, and >90% detection of the predicted resonances. These results indicate that with proper sample preparation, high quality solution NMR spectra of helical integral membrane proteins can be obtained greatly enhancing the probability for structural characterization of these important proteins.     

Solid-state NMR studies of the structure and mechanisms of proteins

Magic-angle spinning solid-state NMR experiments are well suited to investigating the structures and mechanisms of important proteins that are inaccessible to X-ray crystallography and solution NMR spectroscopy, including membrane proteins and disease-related protein aggregates. Good progress has been made in the development of methods for the complete structure determination of small (<20 kDa) solid proteins using uniformly 13C, 15N-labeled samples. Studies of selectively labeled proteins focusing on labeled active sites have yielded insights into the mechanisms of enzymes and of membrane proteins involved in energy and signal transduction. Studies of selectively labeled synthetic peptides have yielded structural models for biomedically important systems, including amyloid fibrils and surface-associated peptides involved in biomineralization and cell adhesion. Novel NMR and biochemical methods are being developed to target solid-state NMR experiments within large proteins and whole cells. These approaches are being used to investigate mechanisms of transmembrane signaling by membrane receptors and to characterize binding interactions between antibiotics and bacterial cell walls. Thus, solid-state NMR is proving to be a valuable biophysical tool for probing structure and dynamics in a wide range of biomolecules.     

Biological membrane structure by solid-state NMR

Nuclear magnetic resonance (NMR) spectroscopy, and particularly solid-state NMR spectroscopy, is a method of choice to study the structure and dynamics of both the lipid and the protein components of model and biological membranes. Different approaches have been developed to study these systems in which the restricted molecular motions result in broad NMR spectra. This contribution will first present an overview of the different techniques used to study lipid bilayers, namely 31p, 2H and 13C solid-state NMR spectroscopy. On the other hand, the study of the structure of membrane peptides and proteins is a rapidly growing field and several methods developed in the last two decades will be presented. These methods allow the investigation of protein systems for which structural information is often difficult to obtain by techniques such as X-ray diffraction and multidimensional solution NMR.     

NMR structures of polytopic integral membrane proteins

Abstract

Membrane proteins represent up to 30% of the proteins in all organisms, they are involved in many biological processes and are the molecular targets for around 50% of validated drugs. Despite this, membrane proteins represent less than 1% of all high-resolution protein structures due to various challenges associated with applying the main biophysical techniques used for protein structure determination. Recent years have seen an explosion in the number of high-resolution structures of membrane proteins determined by NMR spectroscopy, especially for those with multiple transmembrane-spanning segments. This is a review of the structures of polytopic integral membrane proteins determined by NMR spectroscopy up to the end of the year 2010, which includes both β-barrel and α-helical proteins from a number of different organisms and with a range in types of function. It also considers the challenges associated with performing structural studies by NMR spectroscopy on membrane proteins and how some of these have been overcome, along with its exciting potential for contributing new knowledge about the molecular mechanisms of membrane proteins, their roles in human disease, and for assisting drug design.     

Solution NMR of membrane proteins in bilayer mimics: small is beautiful, but sometimes bigger is better

Considerable progress has been made recently on solution NMR studies of multi-transmembrane helix membrane protein systems of increasing size. Careful correlation of structure with function has validated the physiological relevance of these studies in detergent micelles. However, larger micelle and bicelle systems are sometimes required to stabilize the active forms of dynamic membrane proteins, such as the bacterial small multidrug resistance transporters. Even in these systems with aggregate molecular weights well over 100 kDa, solution NMR structural studies are feasible-but challenging.