Electrical Characteristics of Sphingomyelin Bilayer Membranes

Current-voltage characteristics and the conductivity temperature dependence of sphingomyelin bilayer membranes have been determined. The resistances were of the order of 10(8) Omega-cm(2) and exhibited ohmic behavior up to approximately 25 mv followed by increasing conductivity with applied voltage. The current is found to be proportional to a hyperbolic sine function of the voltage. The temperature dependence indicates a thermally activated conduction mechanism. The observed behavior closely follows a kinetic model involving a barrier modified by the applied electric field, the rate-limiting process being the surmounting of the barrier by the impinging ions. The model allows predictions to be made over a wide range of conditions.     

Effects of β-Cyclodextrin on the Structure of Sphingomyelin/Cholesterol Model Membranes

The interaction of β-cyclodextrin (β-CD) with mixed bilayers composed of sphingomylein and cholesterol (Chol) above and below the accepted stable complexation ratio (67:33) was investigated. Membranes with the same (symmetric) and different (asymmetric) compositions in their inner and outer leaflets were deposited at surface pressures of 20, 30, and 40 mN/m at the solid-liquid interface. Using neutron reflectometry, membranes of various global molar ratios (defined as the sum of the molar ratios of the inner and outer leaflets), were characterized before and after β-CD was added to the subphase. The structure of bilayers with global molar ratios at or above the stable complexation ratio was unchanged by β-CD, indicating that β-CD is unable to remove sphingomyelin or complexed Chol. However, β-CD removed all uncomplexed Chol from bilayers composed of global molar ratios below the stable complexation ratio. The removal of Chol by β-CD was independent of the initial structure of the membranes as deposited, suggesting that asymmetric membranes homogenize by the exchange of molecules between leaflets. The interaction of β-CD with the aforementioned membranes was independent of the deposition surface pressure except for a symmetric 50:50 membrane deposited at 40 mN/m. The scattering from 50:50 bilayers with higher packing densities (deposited at 40 mN/m) was unaffected by β-CD, suggesting that the removal of Chol can depend on both the composition and packing density of the membrane.     

The Influence of Hydrogen Bonding on Sphingomyelin/Colipid Interactions in Bilayer Membranes

The phospholipid acyl chain composition and order, the hydrogen bonding, and properties of the phospholipid headgroup all influence cholesterol/phospholipid interactions in hydrated bilayers. In this study, we examined the influence of hydrogen bonding on sphingomyelin (SM) colipid interactions in fluid uni- and multilamellar vesicles. We have compared the properties of oleoyl or palmitoyl SM with comparable dihydro-SMs, because the hydrogen bonding properties of SM and dihydro-SM differ. The association of cholestatrienol, a fluorescent cholesterol analog, with oleoyl sphingomyelin (OSM) was significantly stronger than its association with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine, in bilayers with equal acyl chain order. The association of cholestatrienol with dihydro-OSM, which lacks a trans double bond in the sphingoid base, was even stronger than the association with OSM, suggesting an important role for hydrogen bonding in stabilizing sterol/SM interactions. Furthermore, with saturated SM in the presence of 15 mol % cholesterol, cholesterol association with fluid dihydro-palmitoyl SM bilayers was stronger than seen with palmitoyl SM under similar conditions. The different hydrogen bonding properties in OSM and dihydro-OSM bilayers also influenced the segregation of palmitoyl ceramide and dipalmitoylglycerol into an ordered phase. The ordered, palmitoyl ceramide-rich phase started to form above 2 mol % in the dihydro-OSM bilayers but only above 6 mol % in the OSM bilayers. The lateral segregation of dipalmitoylglycerol was also much more pronounced in dihydro-OSM bilayers than in OSM bilayers. The results show that hydrogen bonding is important for sterol/SM and ceramide/SM interactions, as well as for the lateral segregation of a diglyceride. A possible molecular explanation for the different hydrogen bonding in SM and dihydro-SM bilayers is presented and discussed.     

Effect of Peg Homopolymer and Grafted Amphiphilic Peg-Palmityl on the Thermotropic Phase Behavior of 1,2-Dipalmitoyl-Sn-Glycero-3-Phosphocholine Bilayer

Abstract

Phospholipids covalently attached to polyethylene glycol (PEG-PE) are routinely used for the preparation of long-circulating liposomes. The common preparation procedure for long-circulating liposomes involves use of organic solvent. Although there is a plethora of studies describing the interaction of PEG-PE with bilayers, little is known about the effects of PEG homopolymers and single chain amphiphilic PEG on liposome structure. In the present investigation the interaction of PEG homopolymer and amphiphilic PEG-palmityl conjugate with large multilamellar liposomes composed of 1,2-dipalmitoyl-sn-glycero-phosphocholine was investigated utilizing differential scanning calorimetry. Vesicle and aggregate sizes were determined by dynamic light scattering. DSC thermograms revealed interaction of PEG homopolymer with DPPC when the two are premixed in organic solvent. The data suggest that PEG interacts with the phospholipid acyl chains deep in the bilayer. Several questions are raised regarding the suitability of the current procedure for preparation of long-circulating liposomes which utilizes organic solvent. Incorporation of only 2 mol% 5 kDa PEG-palmityl conjugate completely solubilized DPPC liposomes. Packing geometry of the lipid anchor, irrespective of the polymer molecular weight, is suggested to be the primary factor for successful grafting of hydrophilic polymers on liposomes. Pure PEG-palmityl formed self-assembled organized structures of potential use in the delivery of poorly soluble drugs.     

Properties of Palmitoyl Phosphatidylcholine, Sphingomyelin, and Dihydrosphingomyelin Bilayer Membranes as Reported by Different Fluorescent Reporter Molecules

The properties of vesicle membranes prepared from 16:0-SM, 16:0-DHSM, or DPPC were characterized using steady-state and time-resolved fluorescence spectroscopy and different fluorescent reporter molecules. The acyl-chain region was probed using free and phospholipid-bound 1,6-diphenyl-1,3,5-hexatriene. 16:0-DHSM was found to be the more ordered than both DPPC and 16:0-SM 5°C below and above melting temperature. Interfacial properties of the phospholipid bilayers were examined using 6-dodecanoyl-2-dimethyl-aminonaphthalene (Laurdan), 6-propionyl-2-dimethyl-amino-naphthalene (Prodan), and dansyl-PE. Laurdan and Prodan reported that the two sphingomyelin (SM) membrane interfaces were clearly different from the DPPC membrane interface, whereas the two SM membrane interfaces had more similar properties (both in gel and liquid-crystalline phase). Prodan partition studies showed that membrane resistance to Prodan partitioning increased in the order: 16:0-SM < DPPC < 16:0-DHSM. The degree to which dansyl-PE is exposed to water reflects the structural properties of the membrane-water interface. By comparing the lifetime of dansyl-PE in water and deuterium oxide solution, we could show that the degree to which the dansyl moiety was exposed to water in the membranes increased in the order: 16:0-SM < DPPC < 16:0-DHSM. In conclusion, this study has shown that DHSM forms more ordered bilayers than acyl-chain matched SM or phosphatidylcholine, even in the liquid-crystalline state.     

Oligomeric Structure of Colicin Ia Channel in Lipid Bilayer Membranes

Colicin Ia is a soluble, harpoon-shaped bacteriocin which translocates across the periplasmic space of sensitive Escherichia coli cell by parasitizing an outer membrane receptor and forms voltage-gated ion channels in the inner membrane. This process leads to cell death, which has been thought to be caused by a single colicin Ia molecule. To directly visualize the three-dimensional structure of the channel, we generated two-dimensional crystals of colicin Ia inserted in lipid-bilayer membranes and determined a ∼17 three-dimensional model by electron crystallography. Supported by velocity sedimentation, chemical cross-linking and single-particle image analysis, the three-dimensional structure is a crown-shaped oligomer enclosing a ∼35 Å-wide extrabilayer vestibule. Our study suggests that lipid insertion instigates a global conformational change in colicin Ia and that more than one molecule participates in the channel architecture with the vestibule, possibly facilitating the known large scale peptide translocation upon channel opening.Colicin Ia is a pore-forming water-soluble bacterial toxin produced by some strains of Escherichia coli to kill other competing bacteria (1, 2). It belongs to a functionally and structurally similar group of proteins that also includes colicins A (3), E1 (4), and N (5). Each of these proteins consist of three domains with distinct properties; the receptor domain (R), which binds a specific outer membrane receptor on the target cell, and the translocation domain (T) at the N terminus, responsible for traversing the outer membrane and the periplasmic space to deliver the channel-forming domain (C) at the C terminus to the bacterial inner membrane. The bundle of 10 α-helices that compose the C domain changes its conformation to form a voltage-gated ion channel in the plasma membrane. Opening of the channel produces an efflux of ions that depletes the cellular energy resources and ultimately leads to cell death.The x-ray structure of full-length, soluble colicin Ia (69 kDa) has been determined (6). The monomeric molecule is mostly α-helical, with the R domain separated from the T and C domains by a pair of unusually long (∼160 Å) α-helices thought possibly to span the periplasmic space during channel formation (6). The C domain is characterized by two hydrophobic helices (VIII and IX; residues Ala-580—Ile-612) that is surrounded by the remaining eight largely amphipathic α-helices. The same structural motif for the C domain is conserved in other members of the colicin family and is also present in the channel-forming domains of diphtheria toxin, exotoxin A, and the Bcl family of pro- and anti-apoptotic proteins (7). This pair of helices, termed the hydrophobic hairpin, is instrumental in driving the initial membrane insertion event (8) that is followed by a series of large scale pH and voltage-dependent conformational changes in the C domain, resulting in the opening of the ion channel in the plasma membrane (9, 10). In the absence of a high resolution membrane-inserted structure of a channel-forming colicin, solid-state NMR (11, 12), streptavidin binding (8) and cross-linking of site-directed cysteine mutants (9) have suggested that the initial membrane-bound intermediate exists as a two-dimensional helical array of the eight amphipathic helices (I-VII and X) spread across the membrane surface, with the hydrophobic helices (VIII and IX) embedded in the bilayer. A recent electron paramagnetic resonance study using preparations of spin-labeled ColA proteoliposomes has supported a similar umbrella model where the eight amphipathic helices reside at the air-water interface for the closed-channel state (13). Biotin-labeled cysteine mutants have also been used to determine how much of the C domain (aside from the hydrophobic hairpin) crosses the plasma membrane (14, 15) for colicin Ia. A large region of the amphipathic sequence (helices II-V; residues Leu-474—Tyr-541) has been found to cross from the cis to the trans side of the membrane in planar lipid bilayer experiments, resulting in a four-transmembrane segment molecule that is thought to form the ion channel.Because the 12–13 residue α-helices of the C domain are well short of the ∼20 residues required to span the plasma membrane, it has been proposed that conformational changes causing helix extension take place during the channel formation process. ¹³C spin diffusion NMR has indicated that whereas the overall secondary structure of the C domain is preserved, most of the helices undergo “opening,” and modulation of the tertiary structure allows for the required extension of the helices to cross the plasma membrane and form the channel (16). The internal structure of the colicin Ia channel has been investigated by examining the effect of different nonelectrolyte molecules on the single-channel conductance in planar lipid bilayer membranes (17). It was determined that the diameter at the cis entrance (equivalent to the outside of the cell) is 18 Å, and the diameter at the trans entrance (inside the membrane) is 10 Å, with a 7 Å diameter constriction located in close proximity to the trans entrance of the channel. More recent studies (18) employing the substituted cysteine accessibility method to determine what residues line the open colicin Ia channel suggest an hourglass-shaped pore with the most constricted part near the cis rather than the trans side, as opposed to the conclusion of Krasilnikov et al. (17). Both studies point to a pore constriction inside the membrane, and as pointed out by Kienker et al. 18), there exist plausible explanations to reconcile some of the differing results. The large diameter of the colicin Ia channel coupled with the studies which indicate that each colicin Ia molecule contributes four transmembrane segments in the membrane integrated state (14) suggests that the ion channel is formed by a multimer of colicin Ia molecules. However, all of the past studies directed at determining the oligomeric state of any of the colicin channels indicate a monomeric structure. The question as to how a four-transmembrane monomeric protein can form an ion channel of sufficient diameter to allow the passage of ions as large as tetraethyl ammonium (19) has remained unanswered.In this work we have subjected colicin Ia incorporated into lipid bilayer membranes to structural and biochemical investigations. We show, based on cross-linking and velocity sedimentation experiments, single-particle analysis of electron micrographs and results from electron crystallographic analysis of two-dimensional crystals of colicin Ia that the protein forms oligomers upon insertion into the bilayer. The suggested architecture of this oligomer based on the ∼17 Å resolution three-dimensional model and the biological implications, are discussed.     

Morphology and Phase Behavior of Two-Component Lipid Membranes

The stability and shapes of domains with different bending rigidities in lipid membranes are investigated. These domains can be formed from the inclusion of an impurity in a lipid membrane or from the phase separation within the membrane. We show that, for weak line tensions, surface tensions and finite spontaneous curvatures, an equilibrium phase of protruding circular domains or striped domains may be obtained. We also predict a possible phase transition between the investigated morphologies.     

Temperature Effects on Crassulacean Acid Metabolism: EPR Spectroscopic Studies on the Thermotropic Phase Behaviour of the Tonoplast Membranes of Kalanchoë daigremontiana

The thermotropic phase behaviour of tonoplast material isolated from leaf mesophyll protoplasts of the obligatory CAM plant Kalanchoë daigremontiana was investigated by electron power magnetic resonance (EPR) spectroscopy using a spin label technique. The data clearly show that at temperatures below 9 °C the tonoplast membrane is in a rigid state. Above 9 °C, an increasing fluidization of the tonoplast occurs. Two distinct temperature ranges were observed: a cooperative melting process between 9 and 14 °C being followed by a second broad melting process starting at 18 °C, with continuously increasing membrane fluidity up to 51 °C, which was the highest temperature tested. These results are important for a better understanding of the mechanism of the temperature modulation of CAM. The data support the hypothesis that temperature affects CAM via the permeability of the tonoplast membrane, which determines the rates of the passive malic acid efflux from the vacuole and thus the capability of the plant to accumulate malic acid in the vacuoles overnight at a given temperature.     

Pore Formation in Lipid Bilayer Membranes made of Phosphatidylcholine and Cholesterol Followed by Means of Constant Current

This paper describes the application of chronopotentiometry to lipid bilayer research. The experiments were performed on bilayer lipid membranes composed of phosphatidylcholine and cholesterol and formed using the painting technique. Chronopotentiometric (U = f(t)) measurements were used to determine the membrane capacitance, resistance, and breakdown voltage as well as pore conductance and diameter.     

Phase Behavior of Chloroplast and Microsomal Membranes during Leaf Senescence

Wide angle x-ray diffraction of chloroplast and microsomal membranes from primary leaves of Phaseolus vulgaris has revealed that for both types of membrane, portions of the lipid become crystalline as the tissue senesces. For young leaves the transition temperature is about 23 C for microsomes and below −30 C for chloroplast membranes, indicating that at physiological temperature the lipid is entirely liquid-crystalline. Between 2 and 3 weeks after planting the transition temperature rises to 38 C for microsomes, but for chloroplasts this increase to a point above physiological temperature does not occur until between 3 and 4 weeks. Thereafter the transition temperature continues to rise for both types of membrane with advancing senescence, although the rate of increase is greater for chloroplasts than for microsomes. The appearance at physiological temperature of gel phase lipid in the microsomes coincides temporally with the initiation of a decline in total protein in the tissue, and the incidence of crystallinity in chloroplasts coincides with loss of chlorophyll. This change in phase behavior cannot be attributed to an alteration in fatty acid composition, but for both membrane systems it correlates with an increase of about 4-fold in the sterol to phospholipid ratio.     

Analysis of the Torus Surrounding Planar Lipid Bilayer Membranes

The characteristics and behavior of the torus (annulus) surrounding planar lipid bilayer membranes formed across a cylindrical aperture are analyzed using equations for the shape and volume of the annulus derived by the methods of variational calculus. The analysis leads to the following results: (a) Design criteria for the aperture can be established. (b) The transition region between thin film and thick annulus can be defined quantitatively and its effect on the measurement of specific capacitance determined. (c) At fixed annulus volume the diameter of the thin membrane is a function of the thin film-annulus contact angle. This suggests a new method for examining changes in free energy of the thin film, and explains why the area of thin film increases reversibly when potentials are present across the film. (d) In the absence of buoyant forces, the equations for the shape and volume of the annulus consist of incomplete elliptic integrals of the first and second kinds; however, the shape of the annulus in the transition region can be described with good accuracy by an approximate equation of greater simplicity.     

Interaction of Horse Heart Cytochrome c with Lipid Bilayer Membranes: Effects on Redox Potentials

Cyclic voltammetry has been used to study the effects of interactions between horse cytochrome c and solid-supported planar lipid membranes, comprised of either egg phosphatidylcholine (PC) or PC plus 20 mol.% cardiolipin (CL), on the redox potential and the electrochemical electron transfer rate between the protein and a semiconductor electrode. Experiments were performed over a wide range of cytochrome c concentrations (0–440 M) at low (20 mM) and medium (160 mM) ionic strengths. Three types of electrochemical behavior were observed, which varied as a function of the experimental conditions. At very low cytochrome c concentration (0.1 M), and under conditions where electrostatic forces dominated the protein–lipid membrane interaction (i.e., low ionic strength with membranes containing CL), a redox potential (265 mV) and an electrochemical electron transfer rate constant (0.09s ^–1)were obtained which compare well with those measured in other laboratories using a variety of different chemical modifications of the working electrode. Two other electrochemical signals (not reported with chemically modified electrodes) were also observed to occur at higher cytochrome c concentrations with this membrane system, as well as with two other systems (membranes containing CL under medium ionic strength conditions, and PC only at low ionic strength). These involved positive shifts of the cytochrome c redox potential (by 40 and 60 mV) and large decreases in the electron transfer rate (to 0.03 and 0.003 s^–1). The observations can be rationalized in terms of a structural model of the cytochrome c–membrane interaction, in which association involves both electrostatic and hydrophobic forces and results in varying degrees of insertion of the protein into the hydrophobic interior of the membrane.     

Functions of Cholesterol and the Cholesterol Bilayer Domain Specific to the Fiber-Cell Plasma Membrane of the Eye Lens

The most unique feature of the eye lens fiber-cell plasma membrane is its extremely high cholesterol content. Cholesterol saturates the bulk phospholipid bilayer and induces formation of immiscible cholesterol bilayer domains (CBDs) within the membrane. Our results (based on EPR spin-labeling experiments with lens-lipid membranes), along with a literature search, have allowed us to identify the significant functions of cholesterol specific to the fiber-cell plasma membrane, which are manifest through cholesterol–membrane interactions. The crucial role is played by the CBD. The presence of the CBD ensures that the surrounding phospholipid bilayer is saturated with cholesterol. The saturating cholesterol content in fiber-cell membranes keeps the bulk physical properties of lens-lipid membranes consistent and independent of changes in phospholipid composition. Thus, the CBD helps to maintain lens-membrane homeostasis when the membrane phospholipid composition changes significantly. The CBD raises the barrier for oxygen transport across the fiber-cell membrane, which should help to maintain a low oxygen concentration in the lens interior. It is hypothesized that the appearance of the CBD in the fiber-cell membrane is controlled by the phospholipid composition of the membrane. Saturation with cholesterol smoothes the phospholipid-bilayer surface, which should decrease light scattering and help to maintain lens transparency. Other functions of cholesterol include formation of hydrophobic and rigidity barriers across the bulk phospholipid-cholesterol domain and formation of hydrophobic channels in the central region of the membrane for transport of small, nonpolar molecules parallel to the membrane surface. In this review, we provide data supporting these hypotheses.     

Melittin Stimulates Incorporation and Degradation of Sphingomyelin in Synaptosomal Plasma Membranes

Abstract: Melittin enhanced sphingomyelin (SPM) degradation by the neutral membrane-bound sphingomyelinase from calf brain synaptosomal plasma membranes (SYM) up to 20-fold. Melittin in concentrations as high as 100 μM did not significantly alter membrane fluidity of SYM as measured by fluorescence depolarization and electron spin resonance (ESR) using diphenylhexatriene and a doxy1 derivative of SPM, respectively. In the concentration range 100-1000 μM. melittin was observed to rigidify SYM. The incorporation of SPM.erivatives into the lipid bilayer of SYM.as demonstrated by ESR measurements. Melittin enhanced the uptake of SPM-derivatives into SYM.     

Predictability of Enantiomeric Chromatographic Behavior on Various Chiral Stationary Phases Using Typical Reversed Phase Modeling Software

Pharmaceutical companies worldwide tend to apply chiral chromatographic separation techniques in their mass production strategy rather than asymmetric synthesis. The present work aims to investigate the predictability of chromatographic behavior of enantiomers using DryLab HPLC method development software, which is typically used to predict the effect of changing various chromatographic parameters on resolution in the reversed phase mode. Three different types of chiral stationary phases were tested for predictability: macrocyclic antibiotics‐based columns (Chirobiotic V and T), polysaccharide‐based chiral column (Chiralpak AD‐RH), and protein‐based chiral column (Ultron ES‐OVM). Preliminary basic runs were implemented, then exported to DryLab after peak tracking was accomplished. Prediction of the effect of % organic mobile phase on separation was possible for separations on Chirobiotic V for several probes: racemic propranolol with 97.80% accuracy; mixture of racemates of propranolol and terbutaline sulphate, as well as, racemates of propranolol and salbutamol sulphate with average 90.46% accuracy for the effect of percent organic mobile phase and average 98.39% for the effect of pH; and racemic warfarin with 93.45% accuracy for the effect of percent organic mobile phase and average 99.64% for the effect of pH. It can be concluded that Chirobiotic V reversed phase retention mechanism follows the solvophobic theory. Chirality 25:506–513, 2013. © 2013 Wiley Periodicals, Inc.     

The Effect of Cholesterol in the Liposome Bilayer on the Stabilization of Incorporated Retinol

The effect of cholesterol in the liposome bilayer on the stability of incorporated retinol was studied. Retinol was incorporated into liposomes containing soybean phosphatidylcholine (PC) and cholesterol (CH) at various ratios, and the liposomes were prepared as multilamellar vesicles by the dehydration–rehydration method. Retinol readily incorporated into liposomes at a ratio of 0.01:1 (w/w) retinol:lipid, with over 94.52% being incorporated in all conditions studied. The incorporation efficiency of retinol increased slightly with increasing CH content in the liposome and with increasing pH of the hydration buffer. Average particle size increased as the CH content increased, and mean particle sizes at pH 5, 7, and 9 were 30.27, 89.53, and 41.42 µm, respectively. The time course of retinol degradation in aqueous solution in liposomes with various ratios of PC to CH was determined under a variety of pH conditions (pH 5, 7, and 9), and temperatures (4, 25, 37, and 50°C). The stability of incorporated retinol was enhanced by increasing the CH content. At pH 7.0 and 4°C, for example, 90.17% of the retinol in liposomes containing 50:50 (PC:CH) remained after 10 days of storage, whereas 51.46% remained at 100:0 (PC:CH). These results indicate that CH in liposomes greatly increases the incorporation efficiency of retinol and the stability of incorporated retinol.     

Nonlinear Electrical Effects in Lipid Bilayer Membranes: II. Integration of the Generalized Nernst-Planck Equations

In this paper the ion transport across a thin lipid membrane is treated using a generalized form of the Nernst-Planck equations. An additional term is introduced into the flux equations to account for the image force acting on the ion. As the membrane thickness is of the same order of magnitude as the range of the image forces, the potential energy of the ion in the membrane is strongly dependent on position. The integration of the flux equations leads to a general expression for the integral membrane conductance lambda as a function of the voltage u. The ratio lambda(u)/lambda(0) (lambda(0) = membrane conductance in the limit u --> 0) depends on the dielectric constant and the thickness of the membrane, but is independent of the ionic radius. When the numerical values of the potential energy function, as calculated by the method of electrical images, are inserted into the expression for lambda(u)/lambda(0), a strongly non-linear current-voltage characteristic is obtained. The theoretical current-voltage curve agrees satisfactorily with the experimental data at a low ionic strength and at low voltages; at higher voltages the observed membrane conductance exceeds the predicted value.     

Bacterial Growth on and Penetration of the Shell Membranes of the Hen's Egg

Commonly occurring contaminants of rotten eggs multiplied in a buffered solution of mineral salts containing intact shell membranes. Aeromonas liquefaciens , a nonpigmented pseudomonad, and sometimes a proteolytic strain of a Cloaca sp. caused the membranes to lose their pink colour. This was associated with a marked increase in the turbidity of the suspending medium and with the appearance of substances which reacted with Nessler's reagent and ninhydrin. These changes were not seen after growth of Proteus vulgaris, Alcaligenes faecalis, Pseudomonas fluorescens or non-proteolytic strains of Cloaca spp. No differences were noted in the rate of penetration of the shell and shell membranes by these two groups.     

Enzymatic Oxidation of Cholesterol: Properties and Functional Effects of Cholestenone in Cell Membranes

Bacterial cholesterol oxidase is commonly used as an experimental tool to reduce cellular cholesterol content. That the treatment also generates the poorly degradable metabolite 4-cholesten-3-one (cholestenone) has received less attention. Here, we investigated the membrane partitioning of cholestenone using simulations and cell biological experiments and assessed the functional effects of cholestenone in human cells. Atomistic simulations predicted that cholestenone reduces membrane order, undergoes faster flip-flop and desorbs more readily from membranes than cholesterol. In primary human fibroblasts, cholestenone was released from membranes to physiological extracellular acceptors more avidly than cholesterol, but without acceptors it remained in cells over a day. To address the functional effects of cholestenone, we studied fibroblast migration during wound healing. When cells were either cholesterol oxidase treated or part of cellular cholesterol was exchanged for cholestenone with cyclodextrin, cell migration during 22 h was markedly inhibited. Instead, when a similar fraction of cholesterol was removed using cyclodextrin, cells replenished their cholesterol content in 3 h and migrated similarly to control cells. Thus, cholesterol oxidation produces long-term functional effects in cells and these are in part due to the generated membrane active cholestenone.