Distribution of plasmid maintenance regions among IncFIV plasmids

The distribution of the IncFI basic replicons among IncFIV plasmids was assessed by DNA hybridization. In addition these and 20 other plasmids from 16 incompatibility groups were screened for the presence of IncIV, an incompatibility determinant recently found on the IncFIV plasmid R124. The IncIV determinant was found commonly but not universally among the IncFIV plasmids. It was also detected on the IncFI reference plasmid R386 and plasmids from IncB, IncI alpha and IncI gamma. The frequency and distribution of IncFI replicons among the IncFIV plasmids is similar to that observed in other F groups. The similarity of the IncFIV plasmids to plasmids of the other IncF groups and the failure to find replicons unique to IncFIV plasmids indicates that their division into a separate incompatibility group is not justified.     

Spread and evolution of natural plasmids harboring transposon Tn5

Abstract: The presence of transposon Tn 5 was studied in 730 Enterobacteriaceae strains from clinical and sewage origin. From these strains, twenty-five conjugative plasmids harboring transposon Tn 5 were isolated. These plasmids were compared with pJR67 and pRYC119, the only previously studied plasmids harboring Tn 5 . A phylogenetic tree of the evolution of all different plasmids was proposed. Irrespective of their bacterial host and geographical place of isolation, some of the plasmids were shown to be identical. All of them can be included in only eight different prototypical plasmid species. Twenty-two plasmids (88%) carried an IncI1 incompatibility determinant as judged form DNA hybridization experiments. The presence of some other common resistance genes suggested that these plasmids are descendants of a common ancestor. These IncI1 plasmids could be grouped in six prototypical species. The results presented here suggest that Tn 5 spread in nature may be dependent on the conjugative ability of the IncI plasmids harboring the transposon, rather than on the efficiency of Tn 5 transposition between different replicons.     

Identification of new sex pheromone plasmids in Enterococcus faecalis.

Summary We describe the identification of the following new sex pheromone plasmids inEnterococcus faecalis: a haemolysin-bacteriocin plasmid, pIP964; three R plasmids, pIP1017, pIP1438 and pIP1440; and two cryptic conjugative plasmids, pIP1141 and pMV120. The identification was based on the formation of cell aggregates on filter membranes during conjugation, on efficient transfer in broth matings, and on a positive clumping reaction of cells carrying these plasmids. In addition these plasmids hybridized with DNA probes specific for sex pheromone-induced structural genes encoding surface proteins required for conjugative transfer of the plasmids.     

Structurally stable Bacillus subtilis cloning vectors

Cloning of long DNA segments (greater than 5 kb) in Bacillus subtilis is often unsuccessful when naturally occurring small (less than 10 kb) plasmids are used as vectors. In this work we show that vectors derived from the large (26.5 kb) plasmids pAM beta 1 and pTB19 allow efficient cloning and stable maintenance of long DNA segments (up to 33 kb). The two large plasmids differ from the small ones in several ways. First, replication of the large plasmids does not lead to accumulation of detectable amounts of ss DNA, whereas the rolling-circle replication typical for small plasmids does. In addition, the replication regions of the two large plasmids share no sequence homology with the corresponding regions of the known small plasmids, which are highly conserved. Taken together, these observations suggest that the mode of replication of the large plasmids is different from that of small plasmids. Second, short repeated sequences recombine much less frequently when carried on large than on small plasmids. This indicates that large plasmids are structurally much more stable than small ones. We suggest that the high structural stability of large plasmids is a consequence of their mode of replication and that plasmids which do not replicate as rolling circles should be used whenever it is necessary to clone and maintain long DNA segments in any organism.     

Plasmid-mediated horizontal gene transfer is a coevolutionary process

Conjugative plasmids are key agents of horizontal gene transfer (HGT) that accelerate bacterial adaptation by vectoring ecologically important traits between strains and species. However, although many conjugative plasmids carry beneficial traits, all plasmids exert physiological costs-of-carriage on bacteria. The existence of conjugative plasmids, therefore, presents a paradox because non-beneficial plasmids should be lost to purifying selection, whereas beneficial genes carried on plasmids should be integrated into the bacterial chromosome. Several ecological solutions to the paradox have been proposed, but none account for co-adaptation of bacteria and conjugative plasmids. Drawing upon evidence from experimental evolution, we argue that HGT via conjugation can only be fully understood in a coevolutionary framework.     

Plasmid profiles of Acidithiobacillus ferrooxidans strains adapted to different oxidation substrates

Plasmid profiles were studied in five Acidithiobacillus ferrooxidans strains of various origin cultivated on medium with Fe2+, as well as adapted to such oxidation substrates as S0, FeS2, and sulfide concentrate. The method used revealed plasmids in all A. ferrooxidans strains grown on medium with Fe2+. One plasmid was found in strain TFL-2, two plasmids, in strains TFO, TFBk, and TFV-1, and three plasmids were detected in strain TFN-d. The adaptation of strain TFN-d to sulfide concentrate and the adaptation of strain TFV-1 to S0, FeS2, or sulfide concentrate resulted in a change in the number of plasmids occurring in cells. In cells of strain TFN-d adapted to sulfide concentrate, the number of plasmids decreased from three to two. The number of plasmids in cells of strain TFV-1 adapted to different substrates varied from three to six depending on the energy source present in the medium: three plasmids were found after growth on FeS2, four after growth on S0, and six after growth on sulfide concentrate. The possible role of plasmids in the adaptation of A. ferrooxidans to new energy substrates and in the regulation of the intensity of their oxidation is discussed.     

Distribution of twelve linear extrachromosomal DNAs in natural isolates of Lyme disease spirochetes

We have analyzed a panel of independent North American isolates of the Lyme disease agent spirochete, Borrelia burgdorferi (sensu stricto), for the presence of linear plasmids with sequence similarities to the 12 linear plasmids present in the B. burgdorferi type strain, isolate B31. The frequency of similarities to probes from each of the 12 B31 plasmids varied from 13 to 100% in the strain panel examined, and these similarities usually reside on plasmids similar in size to the cognate B31 plasmid. Sequences similar to 5 of the 12 B31 plasmids were found in all of the isolates examined, and >66% of the panel members hybridized to probes from 4 other plasmids. Sequences similar to most of the B. burgdorferi B31 plasmid-derived DNA probes used were also found on linear plasmids in the related Eurasian Lyme agents Borrelia garinii and Borrelia afzelii; however, some of these plasmids had uniform but substantially different sizes from their B. burgdorferi counterparts.     

The existence conditions for bacterial plasmids: Theory and reality

Bacteria abound with conjugative and nonconjugative plasmids that often carry genes determining a number of environmental adaptations. Plasmids may also encode genes that enable them to transmit themselves infectiously to new host cells, by conjugation or mobilization. The question of whether plasmids can be maintained in a bacterial community as parasitic DNA, that is, while conferring a selective disadvantage to their host, serves as a basic hypothesis in theoretical studies of the population biology of plasmids. The conditions necessary for the establishment and maintenance of plasmids have been determined analytically for the simplest possible models. Based on these a priori conditions, on some reconsiderations and extensions of these models, and on recent estimates of transfer rates of liquid and surface bacterial populations, it will be argued that within a bacterial population, a parasitic lifestyle is unlikely for most naturally occurring plasmids. This result raises anew the problem of how cryptic plasmids are maintained and why plasmids encode costly and elaborate genes for horizontal transfer.     

Correlation of a subset of the pLC plasmids to the physical map of Escherichia coli K-12.

We determined map positions of the Escherichia coli K-12 portions of a subset of the hybrid E. coli-ColE1 plasmids constructed by Clarke and Carbon. The probe DNA of pLC plasmids was labeled with digoxigenine-dUTP, hybridized to the 476 phage clones of the E. coli ordered clone bank miniset, which was adsorbed on a strip of nylon membrane filters, and detected by enzyme-linked immunoassay and a subsequent enzyme-catalyzed color reaction. The total number of Clarke-Carbon plasmids we analyzed was 518, for which chromosomal locations of 297 clones were newly determined in the present study. Another 180 plasmids gave results that agreed with those reported previously, and the remaining 41 plasmids gave map positions different from those described in the previous report. A chromosome map of E. coli which shows the locations of 518 pLC plasmids on it is presented, as well as a table which correlates the pLC plasmids with the clones of the E. coli ordered clone bank miniset on the basis of the hybridization data. We estimate that approximately one-half of the entire genome of E. coli was covered by the pLC plasmids used in this study.     

Isolation of the replication DNA region from a Rhizobium plasmid and examination of its potential as a replicon for Rhizobiaceae cloning vectors

The DNA region essential for replication and stability of a native plasmid (pTM5) from Rhizobium sp. (Hedysarum) has been identified and isolated within a 5.4-kb PstI restriction fragment. The isolation of this region was accomplished by cloning endonuclease-restricted pTM5 DNA into a ColE1-type replicon and selecting the recombinant plasmids containing the pTM5 replicator (pTM5 derivative plasmids) by their ability to replicate in Rhizobium. DNA homology studies revealed that pTM5-like replicons are present in cryptic plasmids from some Rhizobium sp. (Hedysarum) strains but not in plasmids from strains of other Rhizobium species or Agrobacterium tumefaciens. The pTM5 derivative plasmids were able to replicate in Escherichia coli and A. tumefaciens and in a wide range of Rhizobium species. On the basis of stability assays in the absence of antibiotic selective pressure, the pTM5 derivative plasmids were shown to be highly stable in both free-living and symbiotic cells of Rhizobium sp. (Hedysarum). The stability of these plasmids in other species of Rhizobium and in A. tumefaciens varied depending on the host and on the plasmid. Most pTM5 derivative plasmids tested showed significantly higher symbiotic stability than RK2 derivative plasmids pRK290 and pAL618 in Rhizobium sp. (Hedysarum), R. meliloti, and R. leguminosarum by. phaseoli. Consequently, we consider that the constructed pTM5 derivative plasmids are potentially useful as cloning vectors for Rhizobiaceae.     

Piggery manure used for soil fertilization is a reservoir for transferable antibiotic resistance plasmids

In this study, the prevalence and types of transferable antibiotic resistance plasmids in piggery manure were investigated. Samples from manure storage tanks of 15 farms in Germany were analysed, representing diverse sizes of herds, meat or piglet production. Antibiotic resistance plasmids from manure bacteria were captured in gfp-tagged rifampicin-resistant Escherichia coli and characterized. The occurrence of plasmid types was also detected in total community DNA by PCR and hybridization. A total of 228 transconjugants were captured from 15 manures using selective media supplemented with amoxicillin, sulfadiazine or tetracycline. The restriction patterns of 81 plasmids representing different antibiotic resistance patterns or different samples clustered into seven groups. Replicon probing revealed that 28 of the plasmids belonged to IncN, one to IncW, 13 to IncP-1 and 19 to the recently discovered pHHV216-like plasmids. The amoxicillin resistance gene bla-TEM was detected on 44 plasmids, and sulphonamide resistance genes sul1, sul2 and/or sul3 on 68 plasmids. Hybridization of replicon-specific sequences amplified from community DNA revealed that IncP-1 and pHHV216-like plasmids were detected in all manures, while IncN and IncW ones were less frequent. This study showed that 'field-scale' piggery manure is a reservoir of broad-host range plasmids conferring multiple antibiotic resistance genes.     

Stability of Recombinant Plasmids in Transgenic Microorganisms under Different Environmental Conditions

The copy number of R plasmids weakly depends on the selective pressure of the respective antibiotic but does depend on the physiology of the host species and the type of plasmids and cloned genes, whose expression leads to a further load on the biosynthetic apparatus of cells. The last factor is critical in the maintenance of recombinant plasmids in transgenic microorganisms.     

Progress towards understanding the fate of plasmids in bacterial communities

Plasmid-mediated horizontal gene transfer influences bacterial community structure and evolution. However, an understanding of the forces which dictate the fate of plasmids in bacterial populations remains elusive. This is in part due to the enormous diversity of plasmids, in terms of size, structure, transmission, evolutionary history and accessory phenotypes, coupled with the lack of a standard theoretical framework within which to investigate them. This review discusses how ecological factors, such as spatial structure and temporal fluctuations, shape both the population dynamics and the physical features of plasmids. Novel data indicate that larger plasmids are more likely to be harboured by hosts in complex environments. Plasmid size may therefore be determined by environmentally mediated fitness trade-offs. As the correlation between replicon size and complexity of environment is similar for plasmids and chromosomes, plasmids could be used as tractable tools to investigate the influence of ecological factors on chromosomes. Parallels are drawn between plasmids and bacterial facultative symbionts, including the evolution of some members of both groups to a more obligate relationship with their host. The similarity between the influences of ecological factors on plasmids and bacterial symbionts suggests that it may be appropriate to study plasmids within a classical ecological framework.     

Plasmid Profiles of Acidithiobacillus ferrooxidans Strains Adapted to Different Oxidation Substrates

Plasmid profiles were studied in five Acidithiobacillus ferrooxidans strains of various origin cultivated on a medium with Fe²⁺, as well as adapted to such oxidation substrates as S⁰, FeS₂, and sulfide concentrate. The method used revealed plasmids in all A. ferrooxidans strains grown on a medium with Fe²⁺. One plasmid was found in strain TFL-2; two plasmids, in strains TFO, TFBk, and TFV-1; and three plasmids were detected in strain TFN-d. The adaptation of strain TFN-d to sulfide concentrate and the adaptation of strain TFV-1 to S⁰, FeS₂, or sulfide concentrate resulted in a change in the number of plasmids occurring in cells. In cells of strain TFN-d adapted to sulfide concentrate, the number of plasmids decreased from three to two. The number of plasmids in cells of strain TFV-1 adapted to different substrates varied from three to six depending on the energy source present in the medium: three plasmids were found after growth on FeS₂, four after growth on S⁰, and six after growth on sulfide concentrate. The possible role of plasmids in the adaptation of A. ferrooxidans to new energy substrates and in the regulation of the intensity of their oxidation is discussed.     

mRNA stability and plasmid copy number effects on gene expression from an inducible promoter system

The effects of mRNA stability and plasmid copy number on gene expression in Escherichia coli were evaluated by constructing multicopy (pMB1-based) and low-copy (F-based) plasmids containing an arabinose-inducible promoter system, the lacZ reporter gene, and mRNA-stabilizing 5' hairpin structures. Product formation and cell growth were evaluated under a number of inducer concentrations. The introduction of a 5' hairpin into the untranslated region of the mRNA resulted in significantly higher gene expression from the multicopy plasmids at low inducer concentrations and increased gene expression from the low-copy plasmids across all inducer concentrations investigated. With high inducer concentrations, expression from high-copy plasmids significantly slowed cell growth, whereas expression from the low-copy plasmids had little effect on growth rate. At inducer concentrations between 1 x 10(-4) and 4 x 10(-4)%, the productivity of low-copy plasmids containing the 5'-hairpin was equal to or greater than that from multicopy plasmids. Together, these two gene expression strategies may find important use in metabolic engineering and heterologous gene expression.     

Conjugation in bacilli

The review considers experimental data on the conjugal transfer of plasmids in the Bacillus cereus and Bacillus subtilis groups (the transfer of large self-transmissible plasmids and the mobilization of small plasmids). Conjugation in bacilli is compared with conjugation in E. coli dependent on the F factor. Conjugation of bacilli in their natural habitats is also discussed.     

Distribution of Bacillus megaterium QM B1551 plasmids among other B. megaterium strains and Bacillus species

Bacillus megaterium QM B1551 contains seven plasmids. Two are small rolling circle plasmids and five are theta-replicating plasmids with cross-hybridizing replicons that define a new family of very homologous yet compatible theta replicons. Previous sequencing of several of the plasmids has shown genes with high similarity to those on the genomes and plasmids of other Gram-positive bacteria. To test the possible distribution of these plasmids, nine other B. megaterium strains and 20 other Bacillus or related species were tested for the presence of similar replicons, and specific flanking DNA by both hybridization and PCR. The theta replicons were widespread among the B. megaterium strains, and two had one or more of the rolling circle plasmids, but none of the plasmid replicon regions were observed in the other Bacillus or related species. It appears from the data that even though some plasmids carry genes suggesting horizontal transfer, their replicons seem to be unique to B. megaterium, or rarely present in related species.     

Homologies among three Bacillus licheniformis plasmids and molecular characterization of their replication module

To assess to what extent three Bacillus licheniformis plasmids had the same molecular organization a physical map of the 9.34, 8.40 and 7.90 kb plasmids was achieved by using seventeen restriction enzymes. Southern hybridization was performed on plasmids using restriction fragments of the smallest plasmid as probes. Data from different hybridization patterns show a close homology among the three plasmids hypothesizing a similar molecular organization. The lack of plasmid diversity observed, seem to support the hypothesis of a similar phylogeny among these plasmids. This investigation provides more information concerning phylogeny, interrelationships and level of diversity among Bacillus plasmids and a molecular characterization of three plasmids useful for the construction of cloning vectors.