Experimental studies of adaptation to complete dentures related to ageing

The assessment of a patient's capability to adapt to new dentures is still a challenge in the prosthetic treatment of geriatric patients. The aim of this study was to assess the relationship of age to manual motor ability as well as the mental concentration capacity in comparison to the oral motor ability and the capability to adapt to new dentures. Sixty complete denture wearers volunteered for the experiment. The results indicate, that the manual motor ability and the mental concentration capacity deteriorate with age, whereas the relationship of age to adaptation to new dentures and oral motor ability is less obvious. This may be due o t the patient's denture experience.     

Influence of psychological factors on the acceptance of complete dentures

Objectives: To assess the influence of psychological factors on the acceptance of complete dentures in a population wearing dentures judged to be clinically satisfactory. Design: Subjects were asked to complete personality profiles and also to rate their dentures using a denture satisfaction questionnaire. Setting: The survey was conducted in the prosthetics clinic of a teaching hospital. Subjects: Patients were selected from those who had new complete dentures constructed in the department within the previous two years. Intervention and main outcome measures : The personality inventory was a self‐administered questionnaire comprising 240 items covering the five domains of personality. Denture satisfaction was scored on a nine item scale with four Likert type responses to each. Results: A group of 16% consistently complained about their dentures. Statistical analysis showed that personality factors especially Neuroticism had a significant relationship with denture satisfaction. Conclusion: Psychological factors significantly influence denture satisfaction and profiles may provide useful in predicting potential difficult denture wearers.     

Correlation between factors associated with the removable partial dentures use and Candida spp. in saliva

doi: 10.1111/j.1741‐2358.2010.00390.x
Correlation between factors associated with the removable partial dentures use and Candida spp. in saliva Objectives: To correlate the presence and number of Candida spp. in the saliva of wearers of removable partial dentures retained with precision attachments with the proportion of metal/acrylic resin present in the dentures. Methods: Saliva samples from 40 removable partial denture wearers (test) and one paired sample of individuals, non‐wearers of any type of removable denture (control) were collected, seeded, and the colony forming units of Candida counted and identified. The metal/acrylic resin proportion of each denture was quantified, using silicone plates pressed over each denture. Results: Candida spp. was found in the saliva of 80% of the individuals in the test group and 65% of the control, with C. albicans being the most prevalent species. The test group presented with the highest number of colony forming units of Candida per ml of saliva, and there was weak correlation between this number and the metal and resin area of the denture (Pearson’s coefficient of correlation). Greater prevalence and a higher number of colony forming units of Candida per ml of saliva occurred in removable partial denture wearers (p = 0.04) with a weak positive correlation between the metal and resin area and the number of colony forming units of Candida per ml of saliva. However, this correlation was more significant for the area of resin.     

The masticatory handicap of wearing removable dentures in elderly men

Objective: This study aimed at describing the masticatory handicap of wearing removable dentures measured by some masticatory tests and the intake of hard and soft foods. Materials and methods: The subjects were participants in a comprehensive health examination of 67–68‐year‐old men living in Malmö, Sweden. Four hundred eighty‐three men took part in a clinical oral examination which recorded the number of teeth and removable dentures. One hundred and one had complete dentures in both jaws and 131 had removable partial dentures in different combinations. Masticatory tests used almonds to record the number of stokes to the first swallow, and two‐coloured chewing gums for recording bolus kneading and shaping. A nutritionist paid a home visit to assess dietary habits including the consumption of hard and soft foods. The data could be split into groups of different tooth and denture situations which were large enough to enable statistical analysis to be carried out. The results of a regression analysis of the group with different numbers of natural teeth (NT) and no removable dentures could be used as a reference for correlation with the masticatory capacity of removable denture wearers. Results: Number of strokes to the first swallow revealed no masticatory limitations of wearing removable dentures, while chewing gum colour‐mixing and shaping revealed more differentiated impairments equivalent to the function of five to 16 teeth in a remaining natural dentition. Hard food intake for the removable denture groups was comparable to 17–19 NT. Soft food intake was not influenced by denture wearing. In a ranking of oral conditions, those with more than 24 NT had the highest test values for all tests, and those with complete sets of dentures the lowest except for the number of strokes to the first swallow of an almond. Conclusion: Removable denture wearing can be regarded as a handicap when measured with objective masticatory tests using chewing gum and the intake of hard foods. The number of chewing strokes to the first swallow of an almond and the intake of soft foods is not affected by the wearing of removable dentures.     

The oral health‐related quality of life in edentulous patients treated with Conventional complete dentures

Objective: To compare the oral health‐related quality of life (OHRQoL) between patients with both maxillary and mandibular complete denture and those with either the maxillary or the mandibular complete denture. Background: Satisfaction of denture wearers can be estimated using the OHRQoL questionnaires like the OHIP‐EDENT and the Geriatric Oral Health Assessment Index (GOHAI). Methods: Two questionnaires were used to compare the OHRQoL between edentulous patients who had conventional removable complete denture on both jaws and those who had on either one of the jaws. Result: The age of the participants ranged from 42 to 75 years, with the mean age of 58 ± 8.12 years. The mean OHIP‐EDENT scores were significantly high among those who wore conventional dentures in both jaws (54.12 ± 5.21), compared with the participants who only had denture either on upper or lower jaw (46.52 ± 7.35). It was noticed that the mean GOHAI score was significantly lower (p < 0.05) among participants who had conventional denture on both upper and lower jaw (28.25 ± 3.67), as compared to those who had conventional denture only on one arch (35.12 ± 2.11). Conclusion: Patients with complete dentures in both jaw (Group I) were less satisfied than patients with single complete denture (Group II). The result obtained in this study shows dissatisfaction with conventional dentures among edentulous patients.     

Fracture resistance of maxillary complete dentures subjected to long-term water immersion

doi: 10.1111/j.1741‐2358.2012.00616.x Fracture resistance of maxillary complete dentures subjected to long‐term water immersion Objective: This study investigated the fracture resistance of maxillary acrylic resin complete dentures subjected to long‐term water immersion. Materials and Methods: Maxillary acrylic resin complete dentures were fabricated from five denture base resins. Half of the dentures were stored in water for 50 h, and the other half were kept in water for 180 days before testing. Ten specimens were fabricated per group. The flexural load at the proportional limit (FL‐PL) of the dentures was tested. Results: A two‐way anova revealed a significant difference in FL‐PL because of the denture base material variable. There were no significant differences in FL‐PL because of the effect of water immersion and the interaction between the effect of water immersion and the denture base material. The FL‐PLs of the dentures fabricated with the two conventional heat‐processed resins, the pour‐type autopolymerizing resin and the microwave energy‐processed resin were not significantly different from each other; they were significantly higher than the light‐activated resin in regard to their FL‐PL. Conclusion: The FL‐PLs of the maxillary acrylic resin complete dentures did not change after long‐tern water immersion, and the FL‐PL of the denture fabricated from the light‐activated resin was lower than those of the other materials.     

Biomechanical factors contributing to self-organization in seagrass landscapes

Field observations have revealed that when water flow is consistently from one direction, seagrass shoots align in rows perpendicular to the primary axis of flow direction. In this study, live Zostera marina shoots were arranged either randomly or in rows perpendicular to the flow direction and tested in a seawater flume under unidirectional flow and waves to determine if shoot arrangement: a) influenced flow-induced force on individual shoots, b) differentially altered water flow through the canopy, and c) influenced light interception by the canopy. In addition, blade breaking strength was compared with flow-induced force to determine if changes in shoot arrangement might reduce the potential for damage to shoots.

Under unidirectional flow, both current velocity in the canopy and force on shoots were significantly decreased when shoots were arranged in rows as compared to randomly. However, force on shoots was nearly constant with downstream distance, arising from the trade-off of shoot bending and in-canopy flow reduction. The coefficient of drag was higher for randomly-arranged shoots at low velocities (< 30 cm s^− 1) but converged rapidly among the two shoot arrangements at higher velocities. Shoots arranged in rows tended to intercept slightly more light than those arranged randomly. Effects of shoot arrangement under waves were less clear, potentially because we did not achieve the proper plant size–row spacing ratio. At this point, we may only suggest that water motion, as opposed to light capture, is the dominant physical mechanism responsible for these shoot arrangements. Following a computation of the Environmental Stress Factor, we concluded that even photosynthetically active blades may be damaged or broken under frequently encountered storm conditions, irrespective of shoot arrangement.

We hypothesize that when flow is generally from one direction, seagrass bed patterns over multiple scales of consideration may arise as a cumulative effect of individual shoot self-organization driven by reduced force and drag on the shoots and somewhat improved light capture.     

Symptoms of craniomandibular disorders in elderly Brazilian wearers of complete dentures

Objective: Investigate the incidence of symptoms of craniomandibular disorder in elderly Brazilian wearers of full dentures. Design: In this cross‐sectional study, a questionnaire based on Helkimo's anamnestic index was applied to a group of 65‐year‐olds or older individuals who wear a set of full dentures. Setting: Interviews were carried out at the dental clinics of the University of Taubaté and the University of Vale do Paraíba, Brazil. Subjects: From a total of 384 patients, 84 elderly wearers of full dentures were interviewed. Main outcome measures: The questionnaire identified the most commonly related symptoms of craniomandibular disorders. Results: The patient's average age was 73.5 years (ranging from 65 to 89 years), 81% of them females. Only 5% reported pain when opening their mouths, and the same percentage complained of temporomandibular joint luxation and a sensation of tired muscles during mastication. Similar rates were found for pain in the temporomandibular joint area (6%), pain in the temporal muscle area (7%), difficulty to move the mandible in the morning (4%) and pain during excursive (protrusive and lateral) movements (8%). The highest rates were found for pain in the masseter muscle area (39%) and articular noises (24%). Conclusion: The incidence of craniomandibular disorder symptoms was low in this group of elderly wearers of full dentures, except for pain in the masseter (39%) and articular noises (24%).     

Age-related satisfaction with complete dentures,desire for improvement and attitudes to implant treatment

In the edentulous lower jaw implant stabilised dentures have proved clinically so successful that the indication for this treatment is now being discussed more often with geriatric patients. The aim of this study of edentate subjects was to determine the age-relation of the demand for denture improvement, the risks and feasibility of implant treatment. Sixty four complete denture wearers aged from 42 to 84 years took part in the study. A questionnaire was used to determine the subjective demand for denture improvement. For 33 subjects implants seemed possible. For these patients fear and scepticism concerning implant treatment were specified and quantified. Impaired general health was the most frequent absolute contra-indication for implants; the local oral prerequisites tended to be slightly less favourable in elderly. Older patients were more satisfied with poorly fitting dentures and were less prepared to take trouble to achieve denture improvement. Although scepticism concerning implant treatment was not age-related, patients who were keen for an improvement of their dentures were significantly younger and less sceptical about implants.     

Maxillary complete denture movement during chewing in mandibular removable partial denture wearers

Objectives: To evaluate the pattern of maxillary complete denture movement during chewing for free‐end removable partial dentures (RPD) wearers, compared to maxillary and mandibular complete denture wearers. Materials and methods: Eighteen edentulous participants (group I) and 10 volunteers with bilateral posterior edentulous mandibles (group II) comprised the sample. Measures of mean denture movement and its variability were obtained by a kinesiographic instrument K6‐I Diagnostic System, during the mastication of bread and a polysulphide block. Data were analysed using two‐way anova (α = 0.05). Results: Upper movement during chewing was significantly lower for group II, regardless of the test food. The test food did not influence the vertical or lateral position of the denture bases, but more anterior dislocation was found when polysulphide blocks were chewed. Group II presented lower intra‐individual variability for the vertical axis. Vertical displacement was also more precise with bread as a test food. Conclusion: It can be concluded that mandibular free‐end RPD wearers show smaller and more precise movements than mandibular complete denture wearers.     

Biomechanical design of load simulation in multiple spinal segments]

Multisegmental biomechanical studies on the lumbar spine are steadily increasing in importance. Only in this way can we acquire knowledge about the physiological behaviour of the entire lumbar spine. Furthermore, these studies allow us to analyse in vitro the biomechanics of manipulated lumbar spines after various surgical operations on the spine. A load simulator was developed to investigate multisegmental lumbar spine mobility, and its function was investigated in an initial study on 19 fresh--frozen specimens of human lumbar spine. After x-ray examination and determination of the bone mineral density, the specimens were loaded up to 10 Nm in the automatic electromechanical loading system under flexion/extension, lateral bending and axial rotation. An ultrasound-based motion analysis system was used to measure the displacements of the vertebrae involved.     

Influence of different metal flask systems on tooth displacement in complete upper dentures

doi: 10.1111/j.1741‐2358.2010.00392.x Influence of different metal flask systems on tooth displacement in complete upper dentures Objective: To verify the occurrence of tooth displacement in dentures processed by moist hot‐polymerisation using traditional and experimental metal flask systems. Materials and methods: Waxed complete dentures were randomly assigned to three groups (n = 10), including traditional (TF) and experimental flasks (DF and HHF). Metal pins were placed at the incisal edge of maxillary central incisors (I), buccal cusp of first premolars (P) and mesiobuccal cusp of second molars (M). Transversal (I–I, P–P and M–M) and anteroposterior (LI–LM and RI–RM) distances were measured before and after denture processing using an optical microscope. The dentures were processed by hot water curing cycle (9 h/74°C). Collected data were analysed by anova , Paired Student’s t‐test and Holm–Sidak method (p < 0.05). Results: All measured distances demonstrated contraction after polymerisation, except for LI–LM in TF and RI–RM in DF and HHF. Statistically significant differences were found between the distances P–P for DF and HHF, and M–M for all groups. Comparison among flask systems revealed statistically significant difference in the P–P distance for the TF and HHF. Conclusion: Different flask systems did not cause variation in tooth displacement during denture processing, with the exception of P–P distances for the TF and HHF. There is no evidence that different metal flask systems would promote tooth displacement of clinical significance.     

体细胞核移植诱导的表观遗传学变化

体细胞核移植技术是指将一个分化的体细胞核置入去核的卵母细胞中,并发育产生与供体细胞遗传背景一致的克隆后代的技术。目前,世界上通过体细胞核移植技术已经产生了许多的克隆动物。但克隆过程中还存在着很多问题,比如,克隆效率太低、克隆个体常伴有表型异常和早亡等,从而使该技术应有的应用潜力不能得到充分的发挥。体细胞表观遗传学重编程的不完全或紊乱是造成核移植诸多问题的主要原因。近十多年来,人们对体细胞核移植后的重编程进行了广泛的研究,其核心内容包括核及核外结构的重塑、DNA甲基化模式的重建、基因印迹和x染色体失活、组蛋白乙酰化模式的重建、端粒长度恢复等,以期能够对其重编程加以人为干预,从而提高动物克隆效率。本文拟对体细胞核移植诱导的重编程研究进展加以综述,希望对体细胞重编程机制的阐明有所启发。     

Biomechanical influence of disk properties on the load transfer of healthy and degenerated disks using a poroelastic finite element model

Spine degeneration is a pathology that will affect 80% of the population. Since the intervertebral disks play an important role in transmitting loads through the spine, the aim of this study was to evaluate the biomechanical impact of disk properties on the load carried by healthy (Thompson grade I) and degenerated (Thompson grades III and IV) disks. A three-dimensional parametric poroelastic finite element model of the L4/L5 motion segment was developed. Grade I, grade II, and grade IV disks were modeled by altering the biomechanical properties of both the annulus and nucleus. Models were validated using published creep experiments, in which a constant compressive axial stress of 0.35 MPa was applied for 4 h. Pore pressure (PP) and effective stress (S(E)) were analyzed as a function of time following loading application (1 min, 5 min, 45 min, 125 min, and 245 min) and discal region along the midsagittal profile for each disk grade. A design of experiments was further implemented to analyze the influence of six disk parameters (disk height (H), fiber proportion (%F), drained Young's modulus (E(a),E(n)), and initial permeability (k(a),k(n)) of both the annulus and nucleus) on load-sharing for disk grades I and IV. Simulations of grade I, grade III, and grade IV disks agreed well with the available published experimental data. Disk height (H) had a significant influence (p<0.05) on the PP and S(E) during the entire loading history for both healthy and degenerated disk models. Young's modulus of the annulus (E(a)) significantly affected not only S(E) in the annular region for both disk grades in the initial creep response but also S(E) in the nucleus zone for degenerated disks with further creep response. The nucleus and annulus permeabilities had a significant influence on the PP distribution for both disk grades, but this effect occurred at earlier stages of loading for degenerated than for healthy disk models. This is the first study that investigates the biomechanical influence of both geometrical and material disk properties on the load transfer of healthy and degenerated disks. Disk height is a significant parameter for both healthy and degenerated disks during the entire loading. Changes in the annulus stiffness, as well as in the annulus and nucleus permeability, control load-sharing in different ways for healthy and degenerated disks.     

Reliability and comparison of two facial measurements to detect changes of occlusal vertical dimension in complete denture wearers

Gerodontology 2010; doi: 10.1111/j.1741‐2358.2009.00353.x
Reliability and comparison of two facial measurements to detect changes of occlusal vertical dimension in complete denture wearers Background: Facial measurements are frequently used to determine OVD. However, the reliability of neither the method nor the chosen landmarks has been cleared yet. Objective: This study compares the reliability of two facial measurements, subnasal (SN) to chin (C) and tip of the nose (TN) to C, for determining occlusal vertical dimension (OVD). Materials and methods: Thirty edentulous subjects with adequate neuromuscular co‐ordination, without signs and symptoms of temporomandibular disorders and who had been wearing complete dentures for at least 5 years were enrolled. A modified central bearing device was used to alter the OVD and facial measurements were made with a digital caliper. Student’s t‐test was used to compare the two measurements. Interobserver and intraobserver reliability were evaluated with Spearman’s rho correlation test. Results: TN–C distance had an improved correlation with the changes in intraoral alterations than SN–C distance. While the means of the changes in facial measurements were in good agreement with the intraoral alterations, the ranges were wide. Both interobserver and intraobserver reliability of the measurements were high. Conclusion: While facial measurement is not a good predictor of OVD, TN–C distance appears to be more reliable than SN–C distance.     

Insemination factors related to timed AI in cattle

Six-day-old bovine ova/embryos were recovered non-surgically and used as biomonitors to evaluate time of artificial insemination. These embryos/ova provided information regarding fertilization status and embryo quality, as well as quantitative and qualitative data regarding associated accessory sperm. Both sperm access to the ovum (addressed by accessory sperm) and fertilization status/embryo quality were important in addressing pregnancy rate for specific intervals from the onset of estrus to insemination. Based on these biomonitors, early insemination failed to achieve optimum pregnancy rate due to inadequate access of sperm to the ovum (i.e., low fertilization rate, manifested by low accessory sperm numbers). However, embryo quality was high in early inseminations, which favors pregnancy. Late insemination failed to achieve optimum pregnancy rate (due to reduced embryo quality), however, sperm access to the ovum was highest. Thus, the selection of an insemination time to achieve optimum pregnancy rate appeared to be a compromise between the two extreme intervals. For timed-AI programs, consideration of the time of ovulation (and its variability) becomes important, in addition to conventional considerations, such as semen handling, site of insemination, and bull selection.     

In vitro technologies related to pig embryo transfer

Embryo transfer in swine (ETS) has been used for commercial and breeding application only to a limited extent. However this technique is an essential prerequisite for the application of new reproductive techniques in pigs. This paper will give an overview on steps of pig embryo transfer including selection and stimulation of donor sows, recovery of embryos, embryo handling and the transfer of recovered embryos into recipients. Furthermore the current status and further application of ET related in vitro technologies in pig production are described.     

Effect of double flasking and investing methods on artificial teeth movement in complete dentures processing

doi: 10.1111/j.1741‐2358.2011.00494.x
Effect of double flasking and investing methods on artificial teeth movement in complete dentures processing Purpose: The aim of this study was to evaluate linear dimensional alterations of artificial teeth for complete dentures when using different investment and flasking techniques. Background: Dimensional changes in the vertical dimension may occur owing to changes in artificial teeth positioning caused by different investing and flasking techniques. Materials and methods: Thirty pairs of the complete dentures were manufactured and randomly divided into three groups (n = 10): (1) invested with type III stone in monomaxillary PVC flask; (2) invested with type III stone in bimaxillary PVC flask; and (3) invested with laboratory silicone in bimaxillary PVC flask. Dentures were polymerised by microwave, and 12 linear distances were measured before and after denture processing. Data were analysed by one‐way anova , considering manufacturing technique as the study factor. Tukey’s HSD was used as post hocanova (p = 0.05). Results: Most of the linear distances were comparable for all groups. All transversal maxillary and mandibular distances were higher for group 1 compared with groups 2 and 3 (p < 0.05), except the distance 3–6 for mandibular arch, in which no difference was found between groups (p < 0.05). Both maxillary diagonal distances were higher in group 1 (p < 0.05), and no differences were found among all groups for mandibular measurements. Conclusions: Double flasking technique independent on the investment material is shown to be the most effective method to reduce changes in artificial teeth positioning.     

The effect of variation of the lingual shape of mandibular complete dentures on lingual resistance to lifting forces

Increasing life expectancy, age related reduction in adaptability and progressive severe mandibular resorption all add to the importance of any factor improving the prosthetic success. Objective : To investigate the effect of two different lingual shapes of lower dentures on patients' ability to resist lifting forces. Design : Tongue pressures on the lingual surface of complete mandibular experimental dentures were recorded from mid-line, premolar and molar transducers. Two experimental prostheses were fabricated for each subject: one conventionally contoured, the other formed by piezography. Setting : A clinical research laboratory. Subjects Five experienced complete denture wearers between age 64 and 82 years. Intervention Lifting forces were applied at the midline, left and right premolar sites in random order. Main outcome measures : Peak resistance to lifting forces and lingual pressures used during these tests. Results : Lingual pressures exerted anteriorly were dramatically higher than those on premolar and molar surfaces. Significantly higher pressures were used to resist lifting forces applied to piezographically than conventionally formed contours; correspondingly, significantly higher lifting peak forces were, on average, resisted. Conclusions : Providing a lower denture with a piezographically produced lingual surface was shown, in this preliminary study, to enhance tongue retentive ability over a conventional design. It seems reasonable to maximise retentive potential with oblique sublingual polished surfaces and minimise the adaptive demand, particularly for older patients, by using a piezographic technique which “customises” the contour and precludes over-extension.