Aggregation of the Acylphosphatase from Sulfolobus solfataricus: the folded and partially unfolded states can both be precursors for amyloid formation

Protein aggregation is associated with a number of human pathologies including Alzheimer's and Creutzfeldt-Jakob diseases and the systemic amyloidoses. In this study, we used the acylphosphatase from the hyperthermophilic Archaea Sulfolobus solfataricus (Sso AcP) to investigate the mechanism of aggregation under conditions in which the protein maintains a folded structure. In the presence of 15-25% (v/v) trifluoroethanol, Sso AcP was found to form aggregates able to bind specific dyes such as thioflavine T, Congo red, and 1-anilino-8-naphthalenesulfonic acid. The presence of aggregates was confirmed by circular dichroism and dynamic light scattering. Electron microscopy revealed the presence of small aggregates generally referred to as amyloid protofibrils. The monomeric form adopted by Sso AcP prior to aggregation under these conditions retained enzymatic activity; in addition, folding was remarkably faster than unfolding. These observations indicate that Sso AcP adopts a folded, although possibly distorted, conformation prior to aggregation. Most important, aggregation appeared to be 100-fold faster than unfolding under these conditions. Although aggregation of Sso AcP was faster at higher trifluoroethanol concentrations, in which the protein adopted a partially unfolded conformation, these findings suggest that the early events of amyloid fibril formation may involve an aggregation process consisting of the assembly of protein molecules in their folded state. This conclusion has a biological relevance as globular proteins normally spend most of their lifetime in folded structures.     

Mutational analysis of the aggregation-prone and disaggregation-prone regions of acylphosphatase

We have performed an extensive mutational analysis of aggregation and disaggregation of amyloid-like protofibrils of human muscle acylphosphatase. Our findings indicate that the regions that promote aggregation in 25% (v/v) 2,2,2 trifluoroethanol (TFE) are different from those that promote disaggregation under milder conditions (5% TFE). Significant changes in the rate of disaggregation of protofibrils in 5% TFE result not only from mutations situated in the regions of the sequence that play a key role in the mechanism of aggregation in 25% TFE, but also from mutations located in other regions. In order to rationalise these results, we have used a modified version of the Zyggregator aggregation propensity prediction algorithm to take into account structural rearrangements of the protofibrils that may be induced by changes in solution conditions. Our results suggest that a wider range of residues contributes to the stability of the aggregates in addition to those that play an important kinetic role in the aggregation process. The mutational approach described here is capable of providing residue-specific information on the structure and dynamics of amyloid protofibrils under conditions close to physiological and should be widely applicable to other systems.     

Reduction of the amyloidogenicity of a protein by specific binding of ligands to the native conformation

It is known that human muscle acylphosphatase (AcP) is able, under appropriate conditions in vitro, to aggregate and form amyloid fibrils of the type associated with human diseases. A number of compounds were tested for their ability to bind specifically to the native conformation of AcP under conditions favoring denaturation and subsequent aggregation and fibril formation. Compounds displaying different binding affinities for AcP were selected and their ability to inhibit protein fibrillization in vitro was evaluated. We found that compounds displaying a relatively high affinity for AcP are able to significantly delay protein fibrillization, mimicking the effect of stabilizing mutations; in addition, the effectiveness of such outcome correlates positively to both ligand concentration and affinity to the native state of AcP. By contrast, the inhibitory effect of ligands on AcP aggregation disappears in a mutant protein in which such binding affinity is lost. These results indicate that the stabilization of the native conformation of amyloidogenic proteins by specific ligand binding can be a strategy of general interest to inhibit amyloid formation in vivo.     

A single mutation induces amyloid aggregation in the alpha-spectrin SH3 domain: analysis of the early stages of fibril formation

The Src-homology region 3 domain of chicken alpha-spectrin (Spc-SH3) is a small two-state folding protein, which has never been described to form amyloid fibrils under any condition investigated so far. We show here that the mutation of asparagine 47 to alanine at the distal loop, which destabilises similarly the native and folding transition states of the domain, induces the formation of amyloid fibrils under mild acid conditions. Amyloid aggregation of the mutant is enhanced by the increase in temperature, protein concentration and NaCl concentration. The early stages of amyloid formation have been monitored as a function of time and temperature using a variety of biophysical methods. Differential scanning calorimetry experiments under conditions of amyloid formation have allowed the identification of different thermal transitions corresponding to conformational and aggregation processes as well as to the high-temperature disaggregation and unfolding of the amyloid fibrils. Aggregation is preceded by a rapid conformational change in the monomeric domain involving about 40% of the global unfolding enthalpy, considerable change in secondary structure, large loss of tertiary structure and exposure of hydrophobic patches to the solvent. The conformational change is followed by formation of a majority of oligomeric species with apparent hydrodynamic radius between 2.5 nm and 10nm, depending on temperature, together with the appearance and progressive growth of protofibrillar aggregates. After these early aggregation stages, long and curved fibrils of up to several micrometers start to develop by elongation of the protofibrils. The calorimetric data indicate that the specific enthalpy of fibril disaggregation and unfolding is relatively low, suggesting a low density of interactions within the fibril structure as compared to the native protein and a main entropy contribution to the stability of the amyloid fibrils.     

Amyloid-beta protofibrils differ from amyloid-beta aggregates induced in dilute hexafluoroisopropanol in stability and morphology

The brains of Alzheimer's disease (AD) patients contain large numbers of amyloid plaques that are rich in fibrils composed of 40- and 42-residue amyloid-beta (Abeta) peptides. Several lines of evidence indicate that fibrillar Abeta and especially soluble Abeta aggregates are important in the etiology of AD. Recent reports also stress that amyloid aggregates are polymorphic and that a single polypeptide can fold into multiple amyloid conformations. Here we demonstrate that Abeta-(1-40) can form soluble aggregates with predominant beta-structures that differ in stability and morphology. One class of aggregates involved soluble Abeta protofibrils, prepared by vigorous overnight agitation of monomeric Abeta-(1-40) at low ionic strength. Dilution of these aggregation reactions induced disaggregation to monomers as measured by size exclusion chromatography. Protofibril concentrations monitored by thioflavin T fluorescence decreased in at least two kinetic phases, with initial disaggregation (rate constant approximately 1 h(-1)) followed by a much slower secondary phase. Incubation of the reactions without agitation resulted in less disaggregation at slower rates, indicating that the protofibrils became progressively more stable over time. In fact, protofibrils isolated by size exclusion chromatography were completely stable and gave no disaggregation. A second class of soluble Abeta aggregates was generated rapidly (<10 min) in buffered 2% hexafluoroisopropanol (HFIP). These aggregates showed increased thioflavin T fluorescence and were rich in beta-structure by circular dichroism. Electron microscopy and atomic force microscopy revealed initial globular clusters that progressed over several days to soluble fibrous aggregates. When diluted out of HFIP, these aggregates initially were very unstable and disaggregated completely within 2 min. However, their stability increased as they progressed to fibers. Relative to Abeta protofibrils, the HFIP-induced aggregates seeded elongation by Abeta monomer deposition very poorly. The techniques used to distinguish these two classes of soluble Abeta aggregates may be useful in characterizing Abeta aggregates formed in vivo.     

Amyloid formation from HypF-N under conditions in which the protein is initially in its native state

Aggregation of the N-terminal domain of the Escherichia coli HypF (HypF-N) was investigated in mild denaturing conditions, generated by addition of 6-12% (v/v) trifluoroethanol (TFE). Atomic force microscopy indicates that under these conditions HypF-N converts into the same type of protofibrillar aggregates previously shown to be highly toxic to cultured cells. These convert subsequently, after some weeks, into well-defined fibrillar structures. The rate of protofibril formation, monitored by thioflavin T (ThT) fluorescence, depends strongly on the concentration of TFE. Prior to aggregation the protein has far-UV circular dichroism (CD) and intrinsic fluorescence spectra identical with those observed for the native protein in the absence of co-solvent; the quenching of the intrinsic tryptophan fluorescence by acrylamide and the ANS binding properties are also identical in the two cases. These findings indicate that HypF-N is capable of forming amyloid protofibrils and fibrils under conditions in which the protein is initially in a predominantly native-like conformation. The rate constants for folding and unfolding of HypF-N, determined in 10% TFE using the stopped-flow technique, indicate that a partially folded state is in rapid equilibrium with the native state and populated to ca 1%. A kinetic analysis reveals that aggregation results from molecules accessing such a partially folded state. The approach described here shows that it is possible to probe the mechanism of aggregation of a specific protein under conditions in which the protein is initially native and hence relevant to a physiological environment. In addition, the results indicate that toxic protofibrils can be formed from globular proteins under conditions that are only marginally destabilising and in which the large majority of molecules have the native fold. This conclusion emphasises the importance for cells to constantly combat the propensity for even the most stable of these proteins to aggregate.     

The regions of the sequence most exposed to the solvent within the amyloidogenic state of a protein initiate the aggregation process

Formation of misfolded aggregates is an essential part of what proteins can do. The process of protein aggregation is central to many human diseases and any aggregating event needs to be prevented within a cell and in protein design. In order to aggregate, a protein needs to unfold its native state, at least partially. The conformational state that is prone to aggregate is difficult to study, due to its aggregating potential and heterogeneous nature. Here, we use a systematic approach of limited proteolysis, in combination with electrospray ionisation mass spectrometry, to investigate the regions that are most flexible and solvent-exposed within the native, ligand-bound and amyloidogenic states of muscle acylphosphatase (AcP), a protein previously shown to form amyloid fibrils in the presence of trifluoroethanol. Seven proteases with different degrees of specificity have been used for this purpose. Following exposure to the aggregating conditions, a number of sites along the sequence of AcP become susceptible to proteolytic digestion. The pattern of proteolytic cleavages obtained under these conditions is considerably different from that of the native and ligand-bound conformations and includes a portion within the N-terminal tail of the protein (residues 6-7), the region of the sequence 18-23 and the position 94 near the C terminus. There is a significant overlap between the regions of the sequence found to be solvent-exposed from the present study and those previously identified to be critical in the rate-determining steps of aggregation from protein engineering approaches. This indicates that a considerable degree of solvent exposure is a feature of the portions of a protein that initiate the process of aggregation.     

Mutational analysis of the propensity for amyloid formation by a globular protein

Acylphosphatase can be converted in vitro, by addition of trifluoroethanol (TFE), into amyloid fibrils of the type observed in a range of human diseases. The propensity to form fibrils has been investigated for a series of mutants of acylphosphatase by monitoring the range of TFE concentrations that result in aggregation. We have found that the tendency to aggregate correlates inversely with the conformational stability of the native state of the protein in the different mutants. In accord with this, the most strongly destabilized acylphosphatase variant forms amyloid fibrils in aqueous solution in the absence of TFE. These results show that the aggregation process that leads to amyloid deposition takes place from an ensemble of denatured conformations under conditions in which non-covalent interactions are still favoured. These results support the hypothesis that the stability of the native state of globular proteins is a major factor preventing the in vivo conversion of natural proteins into amyloid fibrils under non-pathological conditions. They also suggest that stabilizing the native states of amyloidogenic proteins could aid prevention of amyloidotic diseases.     

Evidence for a mechanism of amyloid formation involving molecular reorganisation within native-like precursor aggregates

The aggregation of the alpha/beta protein acylphosphatase from Sulfolobus solfataricus has been studied under conditions in which the protein maintains a native-like, although destabilised, conformation and that therefore bear resemblance to a physiological medium. Static and dynamic light-scattering measurements indicate that under these conditions the protein aggregates rapidly, within two minutes. The initial aggregates are enzymatically active and have a secondary structure that is not yet characterized by the high content of cross-beta structure typical of amyloid, as inferred from Fourier transform infra-red and circular dichroism measurements. These species then convert slowly into enzymatically inactive aggregates that bind thioflavin T and Congo red, characteristic of amyloid structures, and contain extensive beta-sheet structure. Transmission electron microscopy reveals the presence in the latter aggregates of spherical species and thin, elongated protofibrils, both with diameters of 3-5 nm. Kinetic tests reveal that this process occurs without the need for dissolution and re-nucleation of the aggregates. Formation of thioflavin T-binding and beta-structured aggregates is substantially more rapid than unfolding of the native state, indicating that the initial aggregation process promotes formation of amyloid structures. Taken together, these findings suggest a mechanism of amyloid formation that may have physiological relevance and in which the amyloid structures result from reorganisation of the molecular interactions within the initially formed non-amyloid aggregates.     

Amyloid fibril formation by a domain of rat cell adhesion molecule

Amyloid fibrils are protein aggregates implicated in several amyloidotic diseases. Cellular membranes with local decrease in pH and dielectric constant are associated with the amyloid formation. In this study, domain 1 of cell adhesion molecule CD2 (CD2-1) is used for studying amyloid fibril formation in a water/trifluoroethanol (TFE) mixture. CD2-1 is an all beta-sheet protein similar in topology to the amyloidogenic light chain variable domain, which deposits as amyloid in light chain amyloidosis at acidic pH. When incubated at pH 2.0 in the presence of 18% TFE, CD2-1 initiates the process to assemble into amyloid fibrils. It has been shown that TFE induces CD2-1 conformational change with a chemical transition (C(m)) of 18% (v/v). ANS (1-anilinonapthalene-8-sulfonic acid) binding was used to show that the hydrophobic surface becomes exposed under these solvent conditions. Our studies indicate that partial formation of a non-native conformation and the exposure of the hydrophobic interior could be the origins of oligomerization and fibril formation of CD2-1.     

Amyloidogenic potential of alpha-chymotrypsin in different conformational states

Amyloid fibril formation is widely believed to be a generic property of polypeptide chains. In the present study, alpha-chymotrypsin, a well-known serine protease has been driven toward these structures by the use of two different conditions involving (I) high temperature, pH 2.5, and (II) low concentration of trifluoroethanol (TFE), pH 2.5. A variety of experimental methods, including fluorescence emission, dynamic quenching, steady-state fluorescence anisotropy, far-UV circular dichroism, nuclear magnetic resonance spectroscopy, and dynamic light scattering were employed to characterize the conformational states of alpha-chymotrypsin that precede formation of amyloid fibrils. The structure formed under Condition I was an unfolded monomer, whereas an alpha-helical rich oligomer was induced in Condition II. Both the amyloid aggregation-prone species manifested a higher solvent exposure of hydrophobic and aromatic residues compared with the native state. Upon incubation of the protein in these conditions for 48 h, amyloid-like fibrils were formed with diameters of about 10-12 nm. In contrast, at neutral pH and low concentration of TFE, a significant degree of amorphous aggregation was observed, suggesting that charge neutralization of acidic residues in the amyloid core region has a positive influence on amyloid fibril formation. In summary, results presented in this communication suggest that amyloid fibrils of alpha-chymotrypsin may be obtained from a variety of structurally distinct conformational ensembles highlighting the critical importance of protein evolution mechanisms related to prevention of protein misfolding.     

A model for the aggregation of the acylphosphatase from Sulfolobus solfataricus in its native-like state

Evidence is accumulating that normally folded proteins retain a significant tendency to form amyloid fibrils through a direct assembly of monomers in their native-like conformation. However, the factors promoting such processes are not yet well understood. The acylphosphatase from Sulfolobus solfataricus (Sso AcP) aggregates under conditions in which a native-like state is initially populated and forms, as a first step, aggregates in which the monomers maintain their native-like topology. An unstructured N-terminal segment and an edge beta-strand were previously shown to play a major role in the process. Using kinetic experiments on a set of Sso AcP variants we shall show that the major event of the first step is the establishment of an inter-molecular interaction between the unstructured segment of one Sso AcP molecule and the globular unit of another molecule. This interaction is determined by the primary sequence of the unstructured segment and not by its physico-chemical properties. Moreover, we shall show that the conversion of these initial aggregates into amyloid-like protofibrils is an intra-molecular process in which the Sso AcP molecules undergo conformational modifications. The obtained results allow the formulation of a model for the assembly of Sso AcP into amyloid-like aggregates at a molecular level.     

Receptor-dependent compartmentalization of PPIP5K1, a kinase with a cryptic polyphosphoinositide binding domain

Amyloid-related diseases are a group of illnesses in which an abnormal accumulation of proteins into fibrillar structures is evident. Results from a wide range of studies, ranging from identification of amyloid-β dimers in the brain to biophysical characterization of the interactions between amyloidogenic peptides and lipid membranes during fibril growth shed light on the initial events which take place during amyloid aggregation. Accounts of fibril disaggregation and formation of globular aggregates due to interactions with lipids or fatty acids further demonstrate the complexity of the aggregation process and the difficulty to treat amyloid-related diseases. There is an inherent difficulty in generalizing from studies of aggregation in vitro, but the involvement of too many cellular components limits the ability to follow amyloid aggregation in a cellular (or extracellular) context. Fortunately, the development of experimental methods to generate stable globular aggregates suggests new means of studying the molecular events associated with amyloid aggregation. Furthermore, simulation studies enable deeper understanding of the experimental results and provide useful predictions that can be tested in the laboratory. Computer simulations can nowadays provide molecular or even atomistic details that are experimentally not available or very difficult to obtain. In the present review, recent developments on modelling and experiments of amyloid aggregation are reviewed, and an integrative account on how isolated interactions (as observed in vitro and in silico) combine during the course of amyloid-related diseases is presented. Finally, it is argued that an integrative approach is necessary to get a better understanding of the protein aggregation process.     

Kinetic studies of protein L aggregation and disaggregation

We have investigated the aggregation of protein L in 25% (vol/vol) TFE and 10 mM HCl. Under both conditions, aggregates adopt a fibrillar structure and bind dyes Congo Red and Thioflavin T consistent with the presence of amyloid fibrils. The kinetics of aggregation in 25% TFE suggest a linear-elongation mechanism with critical nucleus size of either two or three monomers. Aggregation kinetics in 10 mM HCl show a prolonged lag phase prior to a rapid increase in aggregation. The lag phase is time-dependent, but the time dependence can be eliminated by the addition of pre-formed seeds. Disaggregation studies show that for aggregates formed in TFE, aggregate stability is a strong function of aggregate age. For example, after 200 min of aggregation, 40% of the aggregation reaction is irreversible, while after 3 days over 60% is irreversible. When the final concentration of the denaturant, TFE, is reduced from 5% to 0, the amount of reversible aggregation doubles. Disaggregation studies of aggregates formed in TFE and 10 mM HCl reveal a complicated effect of pH on aggregate stability.     

Relative influence of hydrophobicity and net charge in the aggregation of two homologous proteins

A potentially amyloidogenic protein has to be at least partially unfolded to form amyloid aggregates. However, aggregation of the partially or totally unfolded state of a protein is modulated by at least three other factors: hydrophobicity, propensity to form secondary structure, and net charge of the polypeptide chain. We propose to evaluate the relative importance of net charge, as opposed to the other factors, on protein aggregation and amyloidogenicity. For this aim, we have used two homologous proteins that were previously shown to be able to form amyloid fibrils in vitro, the N-terminal domain of HypF from Escherichia coli (HypF-N) and human muscle acylphosphatase (AcP). The aggregation process from an ensemble of partially unfolded conformations is ca. 1000-fold faster for HypF-N than for AcP. This difference can mainly be attributed to a higher hydrophobicity and a lower net charge for HypF-N than for AcP. By using protein engineering methods, we have decreased the net charge of AcP to a value identical to that of wild-type HypF-N and increased the net charge of HypF-N to a value identical to that of wild-type AcP. Amino acid substitutions were selected to minimize changes in hydrophobicity and secondary structure propensities. We were able to estimate that the difference in net charge between the two wild-type proteins contributes to 20-25% of the difference in their aggregation rates. An understanding of the relative influences of these forces in protein aggregation has implications for elucidating the complexity of the aggregation process, for predicting the effect of natural mutations, and for accurate protein design.     

Fibrillar beta-lactoglobulin gels: Part 1. Fibril formation and structure

As a prelude to experimental and theoretical work on the mechanical properties of fibrillar beta-lactoglobulin gels, this paper reports the structural characterization of beta-lactoglobulin fibrils by electron and atomic force microscopy (AFM), infrared and Raman spectroscopy, and powder X-ray diffraction. Aggregates formed by incubation of beta-lactoglobulin in various alcohol-water mixtures at pH 2, and in water-trifluoroethanol (TFE) at pH 7, were found to be wormlike (approximately 7 nm in width and <500 nm in length), with a "string-of-beads" appearance. Longer (approximately 7 nm in width, and >1 microm in length), smoother, and seemingly stiffer fibrils formed on heating aqueous beta-lactoglobulin solutions at pH 2 and low ionic strength, although there was little evidence for the higher-order structures common in most amyloid-forming systems. Time-lapse AFM also revealed differences in the formation of these two fibril types: thermally induced aggregation occurring more cooperatively, in keeping with a nucleation and growth process. Only short stiff-rods (<20 nm in length) formed on heating beta-lactoglobulin at pH 7, and only complex three-dimensional "amorphous"aggregates in alcohols other than TFE at this pH. Studies of all of the pH 2 fibrils from beta-lactoglobulin, by Raman and infrared spectroscopy confirmed beta-sheet as mediating the aggregation process. Interestingly, however, some evidence for de novo helix formation for the solvent-induced systems was obtained, although it remains to be seen whether this is actually incorporated into the fibril-structure. In contrast to other amyloid systems, X-ray powder diffraction provided no evidence for extensive repeating "crystalline" structures for any of the pH 2 beta-lactoglobulin fibrils. In relation to amyloid, the lactoglobulin fibrils bear more resemblance to protofilaments than to higher-order fibril structures, these latter appearing more convincingly for thermally induced insulin fibrils (pH 2) also included in the AFM study.     

Self-similarity properties of alpha-crystallin supramolecular aggregates.

The supramolecular aggregation of alpha-crystallin, the major protein of the eye lens, was investigated by means of static and dynamic light scattering. The aggregation was induced by generating heat-modified alpha-crystallin forms and by stabilizing the clusters with calcium ions. The kinetic pattern of the aggregation and the structural features of the clusters can be described according to the reaction limited cluster-cluster aggregation theory previously adopted for the study of colloidal particles aggregation systems. Accordingly, the average mass and the hydrodynamic radius of alpha-crystallin supramolecular aggregates grow exponentially in time. The structure factor of the clusters is typical of fractal aggregates. A fractal dimension df approximately 2.15 was determined, indicating a low probability of sticking together of the primitive aggregating particles. As a consequence, the slow-forming clusters assemble a rather compact structure. The basic units forming the fractal aggregates were found to have a radius about twice (approximately 17 nm) that of the native protein and 5.3 times its size, which is consistent with an intermediate molecular assembly corresponding to the already known high molecular weight forms of alpha-crystallin.     

Exploring the mechanism of formation of native-like and precursor amyloid oligomers for the native acylphosphatase from Sulfolobus solfataricus

Over 40 human diseases are associated with the formation of well-defined proteinaceous fibrillar aggregates. Since the oligomers precursors to the fibrils are increasingly recognized to be the causative agents of such diseases, it is important to elucidate the mechanism of formation of these early species. The acylphosphatase from Sulfolobus solfataricus is an ideal system as it was found to form, under conditions in which it is initially native, two types of prefibrillar aggregates: (1) initial enzymatically active aggregates and (2) oligomers with characteristics reminiscent of amyloid protofibrils, with the latter originating from the structural reorganization of the initial assemblies. By studying a number of protein variants with a variety of biophysical techniques, we have identified the regions of the sequence and the driving forces that promote the first aggregation phase and show that the second phase consists in a cooperative conversion involving the entire globular fold.     

Different amyloid aggregation of smooth muscles titin in vitro

A comparative study of amyloid properties of the aggregates of smooth muscle titin (SMT) from chicken gizzard was carried out. These aggregates were formed in two solutions: 0.15 M glycine-KOH, pH 7.2–7.4 (SMT(Gly)) and 0.2 M KCl, 10 mM imidazole, pH 7.0 (SMT(KCl)). Electron microscopy data showed that SMT aggregates has an amorphous structure in both cases. The results of atomic-force microscopy demonstrated slight differences in morphology in two types of aggregates. The SMT(Gly) aggregates were represented as branching chains, composed of spherical aggregates approximately 300–500 nm in diameter and up to 35 nm in height. The SMT(KCl) aggregates formed sponge-like structures with strands of 8–10 nm in height. Structural analysis of SMT aggregates by X-ray diffraction revealed the presence of cross-β-sheet structure in the samples under study. In the presence of SMT(Gly) aggregates, thioflavine T fluorescence intensity was higher (~3-fold times) compared with that in the presence of SMT(KCl) aggregates. Congo red-stained SMT(Gly) aggregates had yellow to apple-green birefringence under polarized light, which was not observed for SMT(KCl) aggregates. Dynamic light scattering data showed the similar rate of aggregation for both types of aggregates, though SMT(KCl) aggregates were able to partially disaggregate under increased ionic strength of the solution. The ability of SMT to aggregation followed by disaggregation may be functionally significant in the cell.     

Conformational characterization of oligomeric intermediates and aggregates in β-lactoglobulin heat aggregation

In one of the first studies of isolated intermediates in protein aggregation, we have used circular dichroism and fluorescence spectroscopy to characterize metastable oligomers that are formed in the early steps of beta-lactoglobulin heat aggregation. The intermediates show typical molten globule characteristics (secondary structure content similar to the native and less tight packing of the side chains), in agreement with the belief that partly folded states play a key role in protein aggregation. The far-UV CD signal bears strong resemblance to that of a known folding intermediate. Cryo-transmission electron microscopy of the aggregates reveals spherical particles with a diameter of about 50 nm and an internal threadlike structure. Isolated oligomers as well as larger aggregates bind the dye thioflavin T, usually a signature of the amyloid superstructures found in many protein aggregates. This result suggests that the structural motif recognized by thioflavin T can be formed in small oligomers.