System Using Tandem Repeats of the cA Peptidoglycan-Binding Domain from Lactococcus lactis for Display of both N- and C-Terminal Fusions on Cell Surfaces of Lactic Acid Bacteria

Here, we established a system for displaying heterologous protein to the C terminus of the peptidoglycan-binding domain (cA domain) of AcmA (a major autolysin from Lactococcus lactis). Western blot and flow cytometric analyses revealed that the fusion proteins (cA-AmyA) of the cA domain and α-amylase from Streptococcus bovis 148 (AmyA) are efficiently expressed and successfully displayed on the surfaces of L. lactis cells. AmyA was also displayed on the cell surface while retaining its activity. Moreover, with an increase in the number of cA domains, the quantity of cA-AmyA fusion proteins displayed on the cell surface increased. When three repeats of the cA domain were used as an anchor protein, 82% of α-amylase activity was detected on the cells. The raw starch-degrading activity of AmyA was significantly higher when AmyA was fused to the C terminus of the cA domain than when it was fused to the N terminus. In addition, cA-AmyA fusion proteins were successfully displayed on the cell surfaces of Lactobacillus plantarum and Lactobacillus casei.     

Production of glucoamylase in pyruvate decarboxylase deletion mutants of the yeast Kluyveromyces lactis

We have developed a novel Escherichia coli cell surface display system by employing PgsA as an anchoring motif. In our display system, C-terminal fusion to PgsA anchor protein from Bacillus subtilis was used. The enzymes selected for display were α-amylase (AmyA) from Streptococcus bovis 148 and lipase B (CALB) from Candida antarctica. The molecular mass values of AmyA and CALB are approximately 77 and 34 kDa, respectively. The enzymes were displayed on the surface as a fusion protein with a FLAG peptide tag at the C terminus. Both the PgsA-AmyA-FLAG and PgsA-CALB-FLAG fusion proteins were shown to be displayed by immunofluorescence labeling using anti-FLAG antibody. The displayed enzymes were active forms, and AmyA and CALB activities reached 990 U/g (dry cell weight) and 4.6 U/g (dry cell weight), respectively. AmyA-displaying E. coli cells grew utilizing cornstarch as the sole carbon source, while CALB-displaying E. coli cells catalyzed enantioselective transesterification, indicating that they are effective whole-cell biocatalysts. Since a target enzyme with a size of 77 kDa and an industrially useful lipase have been successfully displayed on the cell surface of E. coli for the first time, PgsA protein is probably a useful anchoring motif to display various enzymes.     

Production of <Emphasis Type="SmallCaps">l</Emphasis>-Lysine from starch by <Emphasis Type="BoldItalic">Corynebacterium glutamicum</Emphasis> displaying α-amylase on its cell surface

We engineered a Corynebacterium glutamicum strain displaying α-amylase from Streptococcus bovis 148 (AmyA) on its cell surface to produce amino acids directly from starch. We used PgsA from Bacillus subtilis as an anchor protein, and the N-terminus of α-amylase was fused to the PgsA. The genes of the fusion protein were integrated into the homoserine dehydrogenase gene locus on the chromosome by homologous recombination. l-Lysine fermentation was carried out using C. glutamicum displaying AmyA in the growth medium containing 50 g/l soluble starch as the sole carbon source. We performed l-lysine fermentation at various temperatures (30–40°C) and pHs (6.0–7.0), as the optimal temperatures and pHs of AmyA and C. glutamicum differ significantly. The highest l-lysine yield was recorded at 30°C and pH 7.0. The amount of soluble starch was reduced to 18.29 g/l, and 6.04 g/l l-lysine was produced in 24 h. The l-lysine yield obtained using soluble starch as the sole carbon source was higher than that using glucose as the sole carbon source after 24 h when the same amount of substrates was added. The results shown in the current study demonstrate that C. glutamicum displaying α-amylase has a potential to directly convert soluble starch to amino acids.     

Display of both N- and C-terminal target fusion proteins on the Aspergillus oryzae cell surface using a chitin-binding module

A novel cell surface display system in Aspergillus oryzae was established by using a chitin-binding module (CBM) from Saccharomyces cerevisiae as an anchor protein. CBM was fused to the N or C terminus of green fluorescent protein (GFP) and the fusion proteins (GFP-CBM and CBM-GFP) were expressed using A. oryzae as a host. Western blotting and fluorescence microscopy analysis showed that both GFP-CBM and CBM-GFP were successfully expressed on the cell surface. In addition, cell surface display of triacylglycerol lipase from A. oryzae (tglA), while retaining its activity, was also successfully demonstrated using CBM as an anchor protein. The activity of tglA was significantly higher when tglA was fused to the C terminus than N terminus of CBM. Together, these results show that CBM used as a first anchor protein enables the fusion of both the N and/or C terminus of a target protein.     

Improvement in organophosphorus hydrolase activity of cell surface-engineered yeast strain using Flo1p anchor system

Organophosphorus hydrolase (OPH) hydrolyzes organophosphorus esters. We constructed the yeast-displayed OPH using Flo1p anchor system. In this system, the N-terminal region of the protein was fused to Flo1p and the fusion protein was displayed on the cell surface. Hydrolytic reactions with paraoxon were carried out during 24 h of incubation of OPH-displaying cells at 30°C. p-Nitrophenol produced in the reaction mixture was detected by HPLC. The strain with highest activity showed 8-fold greater OPH activity compared with cells engineered using glycosylphosphatidylinositol anchor system, and showed 20-fold greater activity than Escherichia coli using the ice nucleation protein anchor system. These results indicate that Flo1p anchor system is suitable for display of OPH in the cell surface-expression systems.     

Enhancing the stability of xylanase from Cellulomonas fimi by cell-surface display on Escherichia coli

Aims: The cell‐surface display of Cex, which encodes xylanase and exoglucanase from Cellulomonas fimi, was constructed on Escherichia coli using PgsA as the anchor protein. Characterization of the cell‐surface display of Cex was performed. Methods and Results: PgsA was fused to the N‐terminus of Cex and six histidines were utilized as spacers between the targeting and anchor proteins. Successful cell‐surface display of Cex was demonstrated by Western blot and immunofluorescence analyses on E. coli C41 (DE3). According to the time‐course analysis, the xylanase activity of Cex was achieved at 49 U g^?1 dry cell weight after 12 h culture at 37°C. The optimal temperature and pH ranges of the cell‐surface displayed protein with whole‐cell were broader than the corresponding ranges of the purified form. Further determination of thermostability indicated that the half‐life of cell‐surface displayed Cex was 1·6 times longer than that of purified Cex at 60°C. Conclusions: We have successfully developed the cell‐surface display of xylanase on E. coli. The cell‐surface display can enhance the stability of xylanase against changes in temperature and has the potential of becoming a whole‐cell biocatalyst for industrial applications, such as biobleaching of paper and production of renewable energy. Significance and Impact of the Study: The results demonstrated that the cell‐surface display of xylanase embedded in the cell membrane is more stable than that of the purified enzyme. Thus, to improve the stability of heterologous proteins production, cell‐surface display using the PgsA anchor protein as a tool can be considered in E. coli.     

Construction of an <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> cell-surface display system using a putative GPI-anchored protein

A novel cell-surface display system was constructed in Aspergillus oryzae. Each of the five genes encoding the putative cell-wall-localized protein from the A. oryzae genome was cloned and these cell-surface anchor functions were examined by fusion to the C-terminal of the green fluorescent protein (GFP). Using the MP1 and CWP proteins as anchor proteins, GFP signals were strongly observed on the cell surface of recombinant A. oryzae. When these proteins were used as anchor proteins for cell-surface display of β-glucosidase from A. oryzae, enzyme activity was detected on the cell surface. In particular, β-glucosidase activity of recombinant A. oryzae using MP1, a putative glycosylphosphatidylinositol (GPI) anchor protein was higher than CWP. Based on these results, it was concluded that the MP1 protein can act as a GPI-anchor protein in A. oryzae, and the proposed cell-surface display system using MP1 allows for the display of heterogeneous and endogenous proteins.     

Display of α-Amylase on the Surface of Lactobacillus casei Cells by Use of the PgsA Anchor Protein, and Production of Lactic Acid from Starch

We developed a new cell surface engineering system based on the PgsA anchor protein from Bacillus subtilis. In this system, the N terminus of the target protein was fused to the PgsA protein and the resulting fusion protein was expressed on the cell surface. Using this new system, we constructed a novel starch-degrading strain of Lactobacillus casei by genetically displaying α-amylase from the Streptococcus bovis strain 148 with a FLAG peptide tag (AmyAF). Localization of the PgsA-AmyA-FLAG fusion protein on the cell surface was confirmed by immunofluorescence microscopy and flow cytometric analysis. The lactic acid bacteria which displayed AmyAF showed significantly elevated hydrolytic activity toward soluble starch. By fermentation using AmyAF-displaying L. casei cells, 50 g/liter of soluble starch was reduced to 13.7 g/liter, and 21.8 g/liter of lactic acid was produced within about 24 h. The yield in terms of grams of lactic acid produced per gram of carbohydrate utilized was 0.60 g per g of carbohydrate consumed at 24 h. Since AmyA was immobilized on the cells, cells were recovered after fermentation and used repeatedly. During repeated utilization of cells, the lactic acid yield was improved to 0.81 g per g of carbohydrate consumed at 72 h. These results indicate that efficient simultaneous saccharification and fermentation from soluble starch to lactic acid were carried out by recombinant L. casei cells with cell surface display of AmyA.     

Display of α-amylase on the surface of <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> cells by using NCgl1221 as the anchoring protein,and production of glutamate from starch

We developed a new cell surface display system in Corynebacterium glutamicum based on the C-terminally truncated NCgl1221 anchor protein to increase l-glutamate production from starch directly. The C-terminally truncated NCgl1221 protein is a mutant NCgl1221 and leads to the constitutive export of l-glutamate. The N terminus of α-amylase (AmyA) was fused to truncated NCgl1221, and the resulting fusion protein was expressed on the cell surface by IPTG induction. Localization of the fusion protein was confirmed by immunofluorescence microscopy and flow cytometric analysis. The results of l-glutamate fermentation showed that the soluble starch was utilized to grow and produce l-glutamate by the recombinant strain displaying AmyA. The amount of soluble starch was reduced from 30.0 ± 2.8 to 4.5 ± 0.7 g/l under non-inducing condition and from 50.0 ± 2.4 to 12.5 ± 1.1 g/l under biotin limitation in 36 h. The glutamate concentration in the medium was transiently increased in 14 h under no induction, while under biotin-limiting condition, glutamate production was continuously elevated during fermentation. The amount of glutamate reached 19.3 ± 2.1 g/l after 26 h of fermentation with biotin limitation, which was greater than that produced by the strain using PgsA, one of the poly-γ-glutamate synthetase complexes, as the anchor protein under the same condition. Therefore, the truncated NCgl1221 anchor protein has more advantages than the PgsA anchor protein in glutamate fermentation because truncated NCgl1221 leads to the constitutive export of l-glutamate without any treatments.     

Display of Candida antarctica lipase B on Pichia pastoris and its application to flavor ester synthesis

Two alternative cell-surface display systems were developed in Pichia pastoris using the α-agglutinin and Flo1p (FS) anchor systems, respectively. Both the anchor cell wall proteins were obtained originally from Saccharomyces cerevisiae. Candida antarctica lipase B (CALB) was displayed functionally on the cell surface of P. pastoris using the anchor proteins α-agglutinin and FS. The activity of CALB displayed on P. pastoris was tenfold higher than that of S. cerevisiae. The hydrolytic and synthetic activities of CALB fused with α-agglutinin and FS anchored on P. pastoris were investigated. The hydrolytic activities of both lipases displayed on yeast cells surface were more than 200 U/g dry cell after 120 h of culture (200 and 270 U/g dry cell, respectively). However, the synthetic activity of CALB fused with α-agglutinin on P. pastoris was threefold higher than that of the FS fusion protein when applied to the synthesis of ethyl caproate. Similarly, the CALB displayed on P. pastoris using α-agglutinin had a higher catalytic efficiency with respect to the synthesis of other short-chain flavor esters than that displayed using the FS anchor. Interestingly, for some short-chain esters, the synthetic activity of displaying CALB fused with α-agglutinin on P. pastoris was even higher than that of the commercial CALB Novozyme 435.     

Novel surface display system for heterogonous proteins on Lactobacillus plantarum

Aims: To establish a novel cell surface display system that would enable the display of target proteins on Lactobacillus plantarum. Methods and Results: Blast P analysis of the amino acids sequence data revealed that the N‐terminus of the putative muropeptidase MurO from L. plantarum contained two putative lysin motif (LysM) repeat regions, implying that the MurO was involved in bacterial cell wall binding. To investigate the potential of MurO for surface display, green fluorescent protein (GFP) was fused to MurO at its C‐terminus and the resulting fusion protein was expressed in Escherichia coli. After being mixed with L. plantarum cells in vitro, GFP was successfully displayed on the surfaces of L. plantarum cells. Increases in the fluorescence intensities of chemically pretreated L. plantarum cells compared to those of nonpretreated cells suggested that the peptidoglycan was the binding ligand for MurO. SDS sensitivity assay showed that the GFP fluorescence intensity was reduced after being treated with SDS. To demonstrate the applicability of the MurO‐mediated surface display system, β‐galactosidase from Bifidobacterium bifidium, in place of GFP, was functionally displayed on the surface of L. plantarum cells via MurO. Conclusions: The MurO was a novel anchor protein for constructing a surface display system for L. plantarum. Significance and Impact of Study: The success in surface display of GFP and β‐galactosidase opened up the feasibility of employing the cell wall anchor of MurO for surface display in L. plantarum.     

Direct production of L-lysine from raw corn starch by Corynebacterium glutamicum secreting Streptococcus bovis alpha-amylase using cspB promoter and signal sequence

Corynebacterium glutamicum is an important microorganism in the industrial production of amino acids. We engineered a strain of C. glutamicum that secretes α-amylase from Streptococcus bovis 148 (AmyA) for the efficient utilization of raw starch. Among the promoters and signal sequences tested, those of cspB from C. glutamicum possessed the highest expression level. The fusion gene was introduced into the homoserine dehydrogenase gene locus on the chromosome by homologous recombination. L-Lysine fermentation was conducted using C. glutamicum secreting AmyA in the growth medium containing 50 g/l of raw corn starch as the sole carbon source at various temperatures in the range 30 to 40°C. Efficient L-lysine production and raw starch degradation were achieved at 34 and 37°C, respectively. The α-amylase activity using raw corn starch was more than 2.5 times higher than that using glucose as the sole carbon source during L-lysine fermentation. AmyA expression under the control of cspB promoter was assumed to be induced when raw starch was used as the sole carbon source. These results indicate that efficient simultaneous saccharification and fermentation of raw corn starch to L-lysine were achieved by C. glutamicum secreting AmyA using the cspB promoter and signal sequence.     

Identification of a Mycoloyl Transferase Selectively Involved in O-Acylation of Polypeptides in Corynebacteriales

We have previously described the posttranslational modification of pore-forming small proteins of Corynebacterium by mycolic acid, a very-long-chain α-alkyl and β-hydroxy fatty acid. Using a combination of chemical analyses and mass spectrometry, we identified the mycoloyl transferase (Myt) that catalyzes the transfer of the fatty acid residue to yield O-acylated polypeptides. Inactivation of corynomycoloyl transferase C (cg0413 [Corynebacterium glutamicum mytC {CgmytC}]), one of the six Cgmyt genes of C. glutamicum, specifically abolished the O-modification of the pore-forming proteins PorA and PorH, which is critical for their biological activity. Expectedly, complementation of the cg0413 mutant with either the wild-type gene or its orthologues from Corynebacterium diphtheriae and Rhodococcus, but not Nocardia, fully restored the O-acylation of the porins. Consistently, the three-dimensional structure of CgMytC showed the presence of a unique loop that is absent from enzymes that transfer mycoloyl residues onto both trehalose and the cell wall arabinogalactan. These data suggest the implication of this structure in the enzyme specificity for protein instead of carbohydrate.     

Display of adenoregulin with a novel <Emphasis Type="Italic">Pichia pastoris</Emphasis> cell surface display system

Two Pichia pastoris cell surface display vectors were constructed. The vectors consisted of the flocculation functional domain of Flo 1p with its own secretion signal sequence or the α-factor secretion signal sequence, a polyhistidine (6×His) tag for detection, an enterokinase recognition site, and the insertion sites for target proteins. Adenoregulin (ADR) is a 33-amino-acid antimicrobial peptide isolated from Phyllomedusa bicolor skin. The ADR was expressed and displayed on the Pichia pastoris KM71 cell surface with the system reported. The displayed recombinant ADR fusion protein was detected by fluorescence microscopy and confocal laser scanning microscopy (CLSM). The antimicrobial activity of the recombinant adenoregulin was detected after proteolytic cleavage of the fusion protein on cell surface. The validity of the Pichia pastoris cell surface display vectors was proved by the displayed ADR.     

Corynebacterium diphtheriae: identification and characterization of a channel-forming protein in the cell wall

The cell wall fraction of the gram-positive, nontoxic Corynebacterium diphtheriae strain C8_r(−) Tox⁻ (= ATCC 11913) contained a channel-forming protein, as judged from reconstitution experiments with artificial lipid bilayer experiments. The channel-forming protein was present in detergent-treated cell walls and in extracts of whole cells obtained using organic solvents. The protein had an apparent molecular mass of about 66 kDa as determined on Tricine-containing sodium dodecyl sulfate-polyacrylamide gel electrophoresis gels and consisted of subunits having a molecular mass of about 5 kDa. Single-channel experiments with the purified protein suggested that the protein formed channels with a single-channel conductance of 2.25 nS in 1 M KCl. Further single-channel analysis suggested that the cell wall channel is wide and water filled because it has only slight selectivity for cations over anions and its conductance followed the mobility sequence of cations and anions in the aqueous phase. Antibodies raised against PorA, the subunit of the cell wall channel of Corynebacterium glutamicum, detected both monomers and oligomers of the isolated protein, suggesting that there are highly conserved epitopes in the cell wall channels of C. diphtheriae and PorA. Localization of the protein on the cell surface was confirmed by an enzyme-linked immunosorbent assay. The prospective homology of PorA with the cell wall channel of C. diphtheriae was used to identify the cell wall channel gene, cdporA, in the known genome of C. diphtheriae. The gene and its flanking regions were cloned and sequenced. CdporA is a protein that is 43 amino acids long and does not have a leader sequence. cdporA was expressed in a C. glutamicum strain that lacked the major outer membrane channels PorA and PorH. Organic solvent extracts of the transformed cells formed in lipid bilayer membranes the same channels as the purified CdporA protein of C. diphtheriae formed, suggesting that the expressed protein is able to complement the PorA and PorH deficiency of the C. glutamicum strain. The study is the first report of a cell wall channel in a pathogenic Corynebacterium strain.     

Enhancement of display efficiency in yeast display system by vector engineering and gene disruption

Vector engineering and gene disruption in host cells were attempted for the enhancement of α-agglutinin-based display of proteins on the cell surface in yeast. To evaluate the display efficiency by flow cytometric analysis, DsRed-monomer fused with FLAG-tag was displayed and immunostained as a model protein. The use of leu2-d in the expression vector resulted in the enhanced efficiency and ratio of the accessible display of proteins. Moreover, the amount of displayed proteins in SED1-disrupted cells increased particularly during the stationary growth phase. The combination of these improvements resulted in the quantitatively enhanced accessible display of DsRed-monomer on the yeast cell surface. The improved yeast display system would be useful in a wider range of its applications in biotechnology.     

Display of alpha-amylase on the surface of Lactobacillus casei cells by use of the PgsA anchor protein, and production of lactic acid from starch

We developed a new cell surface engineering system based on the PgsA anchor protein from Bacillus subtilis. In this system, the N terminus of the target protein was fused to the PgsA protein and the resulting fusion protein was expressed on the cell surface. Using this new system, we constructed a novel starch-degrading strain of Lactobacillus casei by genetically displaying alpha-amylase from the Streptococcus bovis strain 148 with a FLAG peptide tag (AmyAF). Localization of the PgsA-AmyA-FLAG fusion protein on the cell surface was confirmed by immunofluorescence microscopy and flow cytometric analysis. The lactic acid bacteria which displayed AmyAF showed significantly elevated hydrolytic activity toward soluble starch. By fermentation using AmyAF-displaying L. casei cells, 50 g/liter of soluble starch was reduced to 13.7 g/liter, and 21.8 g/liter of lactic acid was produced within about 24 h. The yield in terms of grams of lactic acid produced per gram of carbohydrate utilized was 0.60 g per g of carbohydrate consumed at 24 h. Since AmyA was immobilized on the cells, cells were recovered after fermentation and used repeatedly. During repeated utilization of cells, the lactic acid yield was improved to 0.81 g per g of carbohydrate consumed at 72 h. These results indicate that efficient simultaneous saccharification and fermentation from soluble starch to lactic acid were carried out by recombinant L. casei cells with cell surface display of AmyA.     

Direct production of cadaverine from soluble starch using <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> coexpressing α-amylase and lysine decarboxylase

Here, we demonstrated the one-step production of cadaverine from starch using a Corynebacterium glutamicum strain coexpressing Streptococcus bovis 148 α-amylase (AmyA) and Escherichia coli K-12 lysine decarboxylase (CadA). We constructed the E. coli–C. glutamicum shuttle vector, which produces CadA under the control of the high constitutive expression (HCE) promoter, and transformed this vector into C. glutamicum CSS secreting AmyA. The engineered C. glutamicum expressed both CadA and AmyA, which retained their activity. We performed cadaverine fermentation using 50 g/l soluble starch as the sole carbon source without pyridoxal-5’-phosphate, which is the coenzyme for CadA. C. glutamicum coexpressing AmyA and CadA successfully produced cadaverine from soluble starch and the yield of cadaverine was 23.4 mM after 21 h. CadA expression levels under the control of the HCE promoter were assumed to be sufficient to convert l-lysine to cadaverine, as there was no accumulation of l-lysine in the culture medium during fermentation. Thus, we demonstrated that C. glutamicum has great potential to produce cadaverine from biomass resources.     

Display of heterologous proteins on the surface of Lactococcus lactis using the H and W domain of PrtB from Lactobacillus delburueckii subsp. bulgaricus as an anchoring matrix

Aims: The aim of this study was to develop a cell‐surface display system for foreign antigens on the surface of a Lactococcus lactis strain using an H and W domain of PrtB from Lactobacillus delburueckii subsp. bulgaricus as an anchoring matrix. Methods and Results: To construct a cell‐surface display pACL1 vector, a derivative of pSECE1 vector, we amplified the H and W domain of the cell‐surface proteinase Prt B from Lact. bulgaricus using specific primers and then cloned it into a site downstream of the secretion signal sequence in the pSECE1 vector. The new system, designed for cell‐surface display of recombinant proteins on L. lactis, was evaluated by the expression and display of the FliC protein of Salmonella enterica serovar Enteritidis as a reporter gene (pALC1:FliC). The expression of the FliC protein by the transformed cells was analysed by Western blot analysis, and the localization of FliC on the cell surface was confirmed by immunofluorescence microscopy and flow cytometry analysis. A specific band corresponding in size (approx. 110 kDa) to FliC plus the anchor residues was detected by anti‐FliC antibody in the cell extract of L. lactis H61 harbouring pALC1:FliC, but not L. lactis H61 harbouring pALC1. In addition, flow cytometry and immunofluorescence microscopy revealed FliC‐specific positive signals and a significant increase of fluorescence, respectively, in cells harbouring pALC1:FliC compared with that in control cells harbouring the parental pALC1 plasmid. These findings demonstrated that FliC was successfully displayed on the cell surface by the anchor domain of PrtB. Conclusions: A pALC1 vector using the H and W domain of PrtB from Lact. bulgaricus as an anchoring matrix can be used to successfully display the FliC protein on the surface of L. lactis. Significance and Impact of the Study: This novel way of displaying heterologous proteins on the cell surface of L. lactis using the PrtB anchor domain should prove useful for the delivery of antigens and other proteins.     

Surface display of active lipase in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using Sed1 as an anchor protein

A Pichia pastoris cell-surface display system was constructed using the Sed1 anchor system that has been developed in Saccharomyces cerevisiae. Candida antarctica lipase B (CALB) was used as the model protein and was fused to an anchor that consisted of 338 amino acids of Sed1. The resulting fusion protein CALBSed1 was expressed under the control of the alcohol oxidase 1 promoter (pAOX1). Immunofluorescence microscopy of immunolabeled Pichia pastoris revealed that CALB was displayed on the cell surface. Western blot analysis showed that the fusion protein CALBSed1 was attached covalently to the cell wall and was highly glycosylated. The hydrolytic activity of the displayed CALB was more than 220 U/g dry cells after 120 h of culture. The displayed protein also exhibited a higher degree of thermostability than free CALB.