Regulation of vascular smooth muscle cells by micropatterning

Vascular smooth muscle cells (SMCs) undergo morphological and phenotypic changes when cultured in vitro. To investigate whether SMC morphology regulates SMC functions, bovine aortic SMCs were grown on micropatterned collagen strips (50-, 30-, and 20-microm wide). The cell shape index and proliferation rate of SMCs on 30- and 20-microm strips were significantly lower than those on non-patterned collagen (control), and the spreading area was decreased only for cells patterned on the 20-microm strips, suggesting that SMC proliferation is dependent on cell shape index. The formation of actin stress fibers and the expression of alpha-actin were decreased in SMCs on the 20- and 30-microm collagen strips. SMCs cultured on micropatterned biomaterial poly-(D,L-lactide-co-glycolide) (PLGA) with 30-microm wide grooves also showed lower proliferation rate and less stress fibers than SMCs on non-patterned PLGA. Our findings suggest that micropatterned matrix proteins and topography can be used to control SMC morphology and that elongated cell morphology decreases SMC proliferation but is not sufficient to promote contractile phenotype.     

Cell shape regulates collagen type I expression in human tendon fibroblasts

Understanding the relationship between cell shape and cellular function is important for study of cell biology in general and for regulation of cell phenotype in tissue engineering in particular. In this study, microcontact printing technique was used to create cell-adhesive rectangular and circular islands. The rectangular islands had three aspect ratios: 19.6, 4.9, and 2.2, respectively, whereas circular islands had a diameter of 50 microm. Both rectangular and circular islands had the same area of 1960 microm(2). In culture, we found that human tendon fibroblasts (HTFs) assumed the shapes of these islands. Quantitative immunofluorescence measurement showed that more elongated cells expressed higher collagen type I than did less stretched cells even though cell spreading area was the same. This suggests that HTFs, which assume an elongated shape in vivo, have optimal morphology in terms of expression of collagen type I, which is a major component of normal tendons. Using immunohistochemistry along with cell traction force microscopy (CTFM), we further found that these HTFs with different shapes exhibited variations in actin cytoskeletal structure, spatial arrangement of focal adhesions, and spatial distribution and magnitude of cell traction forces. The changes in the actin cytoskeletal structure, focal adhesion distributions, and traction forces in cells with different shapes may be responsible for altered collagen expression, as they are known to be involved in cellular mechanotransduction.     

Influence of Micropatterning on Human Periodontal Ligament Cells’ Behavior

The periodontal ligament (PDL) is highly ordered connective tissue located between the alveolar bone and cementum. An aligned and organized architecture is required for its physiological function. We applied micropatterning technology to arrange PDL cells in 10- or 20-μm-wide extracellular protein patterns. Cell and nuclear morphology, cytoskeleton, proliferation, differentiation, and matrix metalloproteinase system expression were investigated. Micropatterning clearly elongated PDL cells with a low cell-shape index and low spreading area. The nucleus was also elongated as nuclear height increased, but the nuclear volume remained intact. The cytoskeleton was rearranged to form prominent bundles at cells’ peripheral regions. Moreover, proliferation was promoted by 10- and 20-μm micropatterning. Osteogenesis and adipogenesis were each inhibited, but micropatterning increased PDL cells’ stem cell markers. β-catenin was expelled to cytoplasm. YAP/TAZ nuclear localization and activity both decreased, which might indicate their role in micropatterning-regulated differentiation. Collagen Ι expression increased in micropatterned groups. It might be due to the decreased expression of matrix metalloproteinase-1, 2 and the tissue inhibitor of metalloproteinase-1 gene expression elevation in micropatterned groups. The findings of this study provide insight into the effects of a micropatterned surface on PDL cell behavior and may be applicable in periodontal tissue regeneration.     

Engineering micropatterned surfaces to modulate the function of vascular stem cells

Multipotent vascular stem cells have been implicated in vascular disease and in tissue remodeling post therapeutic intervention. Hyper-proliferation and calcified extracellular matrix deposition of VSC cause blood vessel narrowing and plaque hardening thereby increasing the risk of myocardial infarct. In this study, to optimize the surface design of vascular implants, we determined whether micropatterned polymer surfaces can modulate VSC differentiation and calcified matrix deposition. Undifferentiated rat VSC were cultured on microgrooved surfaces of varied groove widths, and on micropost surfaces. 10 μm microgrooved surfaces elongated VSC and decreased cell proliferation. However, microgrooved surfaces did not attenuate calcified extracellular matrix deposition by VSC cultured in osteogenic media conditions. In contrast, VSC cultured on micropost surfaces assumed a dendritic morphology, were significantly less proliferative, and deposited minimal calcified extracellular matrix. These results have significant implications for optimizing the design of cardiovascular implant surfaces.     

Spatial patterning of cell proliferation and differentiation depends on mechanical stress magnitude

Mechanical stress has been proposed as a major regulator of tissue morphogenesis; however, it remains unclear what is the exact mechanical signal that leads to local tissue pattern formation. We explored this question by using a micropatterned cell aggregate model in which NIH 3T3 fibroblasts were cultured on micropatterned adhesive islands and formed cell aggregates (or “cell islands”) of triangular, square, and circular shapes. We found that the cell islands generated high levels of mechanical stresses at their perimeters compared to their inner regions. Regardless of the shape of cell islands, the mechanical stress patterns corresponded to both cell proliferation and differentiation patterns, meaning that high level of cell proliferation and differentiation occurred at the locations where mechanical stresses were also high. When mechanical stretching was applied to cell islands to elevate overall mechanical stress magnitudes, cell proliferation and differentiation generally increased with the relatively higher mechanical stresses, but neither cell proliferation nor differentiation patterns followed the new mechanical stress pattern. Thus, our findings indicate that a certain range of mechanical stress magnitudes, termed window stress threshold, drives formation of cell proliferation and differentiation patterns and hence possibly functions as a morphogenetic cue for local tissue pattern formation in vivo.     

Micropatterning of single endothelial cell shape reveals a tight coupling between nuclear volume in G1 and proliferation

Shape-dependent local differentials in cell proliferation are considered to be a major driving mechanism of structuring processes in vivo, such as embryogenesis, wound healing, and angiogenesis. However, the specific biophysical signaling by which changes in cell shape contribute to cell cycle regulation remains poorly understood. Here, we describe our study of the roles of nuclear volume and cytoskeletal mechanics in mediating shape control of proliferation in single endothelial cells. Micropatterned adhesive islands were used to independently control cell spreading and elongation. We show that, irrespective of elongation, nuclear volume and apparent chromatin decondensation of cells in G1 systematically increased with cell spreading and highly correlated with DNA synthesis (percent of cells in the S phase). In contrast, cell elongation dramatically affected the organization of the actin cytoskeleton, markedly reduced both cytoskeletal stiffness (measured dorsally with atomic force microscopy) and contractility (measured ventrally with traction microscopy), and increased mechanical anisotropy, without affecting either DNA synthesis or nuclear volume. Our results reveal that the nuclear volume in G1 is predictive of the proliferative status of single endothelial cells within a population, whereas cell stiffness and contractility are not. These findings show that the effects of cell mechanics in shape control of proliferation are far more complex than a linear or straightforward relationship. Our data are consistent with a mechanism by which spreading of cells in G1 partially enhances proliferation by inducing nuclear swelling and decreasing chromatin condensation, thereby rendering DNA more accessible to the replication machinery.     

Change in cell shape is required for matrix metalloproteinase-induced epithelial-mesenchymal transition of mammary epithelial cells

Cell morphology dictates response to a wide variety of stimuli, controlling cell metabolism, differentiation, proliferation, and death. Epithelial-mesenchymal transition (EMT) is a developmental process in which epithelial cells acquire migratory characteristics, and in the process convert from a "cuboidal" epithelial structure into an elongated mesenchymal shape. We had shown previously that matrix metalloproteinase-3 (MMP3) can stimulate EMT of cultured mouse mammary epithelial cells through a process that involves increased expression of Rac1b, a protein that stimulates alterations in cytoskeletal structure. We show here that cells treated with MMP-3 or induced to express Rac1b spread to cover a larger surface, and that this induction of cell spreading is a requirement of MMP-3/Rac1b-induced EMT. We find that limiting cell spreading, either by increasing cell density or by culturing cells on precisely defined micropatterned substrata, blocks expression of characteristic markers of EMT in cells treated with MMP-3. These effects are not caused by general disruptions in cell signaling pathways, as TGF-beta-induced EMT is not affected by similar limitations on cell spreading. Our data reveal a previously unanticipated cell shape-dependent mechanism that controls this key phenotypic alteration and provide insight into the distinct mechanisms activated by different EMT-inducing agents.     

Fibulin-5 binds human smooth-muscle cells through alpha5beta1 and alpha4beta1 integrins, but does not support receptor activation

Fibulin-5, an extracellular matrix glycoprotein expressed in elastin-rich tissues, regulates vascular cell behaviour and elastic fibre deposition. Recombinant full-length human fibulin-5 supported primary human aortic SMC (smooth-muscle cell) attachment through alpha5beta1 and alpha4beta1 integrins. Cells on fibulin-5 spread poorly and displayed prominent membrane ruffles but no stress fibres or focal adhesions, unlike cells on fibronectin that also binds these integrins. Cell migration and proliferation were significantly lower on fibulin-5 than on fibronectin. Treatment of cells on fibulin-5 with a beta1 integrin-activating antibody induced stress fibres, increased attachment, migration and proliferation, and stimulated signalling of epidermal growth factor receptor and platelet-derived growth factor receptors alpha and beta. Fibulin-5 also modulated fibronectin-mediated cell spreading and morphology. We have thus identified the beta1 integrins on primary SMCs that fibulin-5 interacts with, and have shown that failure of fibulin-5 to activate these receptors limits cell spreading, migration and proliferation.     

Bone morphogenetic protein-7 (osteogenic protein-1) inhibits smooth muscle cell proliferation and stimulates the expression of markers that are characteristic of SMC phenotype in vitro

Vascular proliferative disorders are characterized by migration and proliferation of vascular smooth muscle cells (SMCs), loss of expression of SMC phenotype, and enhanced extracellular matrix synthesis (e.g., type I collagen). We report here that bone morphogenetic protein-7 (BMP-7), a member of the transforming growth factor-beta (TGF-beta) superfamily, is capable of inhibiting both serum-stimulated and growth factor-induced (platelet-derived growth factor [PDGF-BB] and TGF-beta1) cell growth as measured by (3)H-thymidine uptake into DNA synthesis and cell number in primary human aortic smooth muscle (HASM) cell cultures. Concomitantly, addition of BMP-7 stimulates the expression of SMC-specific markers, namely alpha-actin and heavy chain myosin as examined by RT-PCR and Northern blot analyses. The collagen type III/I ratio that becomes lower with the transdifferentiation of SMCs into myofibroblasts is also maintained in BMP-7-treated cultures as compared to untreated controls. Studies on the mechanism of action indicate that BMP-7 treatment inhibits cyclin-dependent kinase 2 (cdk-2) that was stimulated during PDGF-BB-induced proliferation of SMCs and upregulates the expression of the inhibitory Smad, Smad6, which was shown to inhibit TGF-beta superfamily signaling. These results collectively suggest that BMP-7 maintains the expression of vascular SMC phenotype and may prevent vascular proliferative disorders, thus potentially acting as a palliative after damage to the vascular integrity.     

The effect of substrate and adsorbed proteins on adhesion, growth and shape of CaCo-2 cells

Extracellular matrix (ECM) proteins play a critical role in many cellular functions, from spreading, migration and proliferation to apoptosis. This role can be altered when proteins of the native ECM are adsorbed to different substrates which cause structural modifications that can influence their biological function. The effects on CaCo-2 cells of laminin-1, fibronectin, collagen-1 and ECM gel adsorbed to glass and to tissue culture polystyrene (PS) were compared in terms of adhesion, proliferation, shapes and spreading of cells in culture. Significant differences between glass and PS surfaces were observed for proliferation and cell shape. Protein surfaces prepared on PS substrates had, in most cases, more pronounced effects on cells than uncoated PS, especially if coated by collagen-1. Adsorbed ECM gel was the most adhesive for cells, but its effect on cell proliferation was not notably different from the controls (glass or PS). These findings indicate that the choice of the substrate can have a significant effect on experimental results and should be taken into consideration when comparing results obtained on different surfaces.     

Intrinsic Response Towards Physiologic Stiffness is Cell-Type Dependent

In the continuous search for better tissue engineering scaffolds it has become increasingly clear that the substrate properties dramatically affect cell responses. Here we compared cells from a physiologically stiff tissue, melanoma, to cells isolated from a physiologically soft tissue, brain. We measured the cell line responses to laminin immobilized onto glass or polyacrylamide hydrogels tuned to have a Young’s modulus ranging from 1 to 390?kPa. Single cells were analyzed for spreading area, shape, total actin content, actin-based morphological features and modification of immobilized laminin. Both cell types exhibited stiffness- and laminin concentration-dependent responses on polyacrylamide and glass. Melanoma cells exhibited very little spreading and were rounded on soft (1, 5, and 15?kPa) hydrogels while cells on stiff (40, 100, and 390?kPa) hydrogels were spread and had a polarized cell shape with large lamellipodia. On rigid glass surfaces, spreading and actin-based morphological features were not observed until laminin concentration was much higher. Similarly, increased microglia cell spreading and presence of actin-based structures were observed on stiff hydrogels. However, responses on rigid glass surfaces were much different. Microglia cells had large spreading areas and elongated shapes on glass compared to hydrogels even when immobilized laminin density was consistent on all gels. While cell spreading and shape varied with Young’s modulus of the hydrogel, the concentration of f-actin was constant. A decrease in laminin immunofluorescence was associated with melanoma and microglia cell spreading on glass with high coating concentration of laminin, indicating modification of immobilized laminin triggered by supraphysiologic stiffness and high ligand density. These results suggest that some cell lines are more sensitive to mechanical properties matching their native tissue environment while other cell lines may require stiffness and extracellular ligand density well above physiologic tissue before saturation in cell spreading, elongation and cytoskeletal re-organization are reached.     

Hydrostatic pressure influences morphology and expression of VE-cadherin of vascular endothelial cells

Bovine aortic endothelial cells (BAECs) were exposed to hydrostatic pressures of 50, 100, and 150 mmHg and changes in morphology and expression of vascular endothelial (VE)-cadherin were studied. After exposure to hydrostatic pressure, BAECs exhibited elongated and tortuous shape without predominant orientation, together with the development of centrally located, thick stress fibers. Pressured BAECs also exhibited a multilayered structure unlike those under control conditions and showed a significant increase in proliferation compared with control cells. Western blot analysis demonstrated that protein level of VE-cadherin were significantly lower under pressure conditions than under control conditions. Inhibition of VE-cadherin expression, using an antibody to VE-cadherin, induced the formation of numerous randomly distributed intercellular gaps, elongated and tortuous shapes, and multilayering. These responses were similar to those of pressured BAECs. The exposure of BAECs to hydrostatic pressure may therefore downregulate the expression of VE-cadherin, resulting in loss of contact inhibition followed by increased proliferation and formation of a multilayered structure.     

Effects of morphological patterning on endothelial cell migration

The migration of vascular endothelial cells (ECs) plays an important role in vascular remodeling. Here we studied the effects of cell morphology on the migration of bovine aortic ECs by culturing cells on micropatterned strips of collagen matrix (60-, 30-, and 15-microm wide). The spreading areas of the cells on 15- and 30-microm wide strips were 30% lower than those on 60-microm wide strips and unpatterned collagen. The cells on 15-microm wide strips completely aligned in the direction of the strip, and had significantly lower shape index than those in all other groups. On strips of all widths, ECs tended to migrate in the direction of strips. ECs on 15-microm wide strips had highest speed, particularly in the direction of the strip. Vinculin staining showed that the leading edge of ECs on 15-microm wide strips had focal adhesions that were oriented with their lamellipodial protrusion and the direction of cell migration; this arrangement of the focal adhesions may promote EC migration. The present study provides direct evidence on the role of cell morphology in EC migration, and will help us to understand the mechanisms of EC migration during angiogenesis and wound healing.     

Cooperative control of Akt phosphorylation, bcl-2 expression, and apoptosis by cytoskeletal microfilaments and microtubules in capillary endothelial cells

Capillary endothelial cells can be switched between growth and apoptosis by modulating their shape with the use of micropatterned adhesive islands. The present study was carried out to examine whether cytoskeletal filaments contribute to this response. Disruption of microfilaments or microtubules with the use of cytochalasin D or nocodazole, respectively, led to levels of apoptosis in capillary cells equivalent to that previously demonstrated by inducing cell rounding with the use of micropatterned culture surfaces containing small (<20 microm in diameter) circular adhesive islands coated with fibronectin. Simultaneous disruption of microfilaments and microtubules led to more pronounced cell rounding and to enhanced levels of apoptosis approaching that observed during anoikis in fully detached (suspended) cells, indicating that these two cytoskeletal filament systems can cooperate to promote cell survival. Western blot analysis revealed that the protein kinase Akt, which is known to be critical for control of cell survival became dephosphorylated during cell rounding induced by disruption of the cytoskeleton, and that this was accompanied by a decrease in bcl-2 expression as well as a subsequent increase in caspase activation. This ability of the cytoskeleton to control capillary endothelial cell survival may be important for understanding the relationship among extracellular matrix turnover, cell shape changes, and apoptosis during angiogenesis inhibition.     

Micropatterned structural control suppresses mechanotaxis of endothelial cells

Vascular endothelial cell migration is critical in many physiological processes including wound healing and stent endothelialization. To determine how preexisting cell morphology influences cell migration under fluid shear stress, endothelial cells were preset in an elongated morphology on micropatterned substrates, and unidirectional shear stress was applied either parallel or perpendicular to the cell elongation axis. On micropatterned 20-μm lines, cells exhibited an elongated morphology with stress fibers and focal adhesion sites aligned parallel to the lines. On 115-μm lines, cell morphology varied as a function of distance from the line edge. Unidirectional shear stress caused unpatterned cells in a confluent monolayer to exhibit triphasic mechanotaxis behavior. During the first 3 h, cell migration speed increased in a direction antiparallel to the shear stress direction. Migration speed then slowed and direction became spatially heterogeneous. Starting 11-12 h after the onset of shear stress, the unpatterned cells migrated primarily in the downstream direction, and migration speed increased significantly. In contrast, mechanotaxis was suppressed after the onset of shear stress in cells on micropatterned lines during the same time period, for the cases of both parallel and perpendicular flow. The directional persistence time was much longer for cells on the micropatterned lines, and it decreased significantly after flow onset. Migration trajectories were highly correlated among micropatterned cells within a three-cell neighborhood, and shear stress disrupted this spatially correlated migration behavior. Thus, presetting structural morphology may interfere with mechanisms of sensing local physical cues, which are critical for establishing mechanotaxis in response to hemodynamic shear stress.     

Dynamics of Cell Shape and Forces on Micropatterned Substrates Predicted by a Cellular Potts Model

Micropatterned substrates are often used to standardize cell experiments and to quantitatively study the relation between cell shape and function. Moreover, they are increasingly used in combination with traction force microscopy on soft elastic substrates. To predict the dynamics and steady states of cell shape and forces without any a priori knowledge of how the cell will spread on a given micropattern, here we extend earlier formulations of the two-dimensional cellular Potts model. The third dimension is treated as an area reservoir for spreading. To account for local contour reinforcement by peripheral bundles, we augment the cellular Potts model by elements of the tension-elasticity model. We first parameterize our model and show that it accounts for momentum conservation. We then demonstrate that it is in good agreement with experimental data for shape, spreading dynamics, and traction force patterns of cells on micropatterned substrates. We finally predict shapes and forces for micropatterns that have not yet been experimentally studied.     

Phenotypic heterogeneity influences the behavior of rat aortic smooth muscle cells in collagen lattice

Phenotypic modulation of vascular smooth muscle cells (SMCs) in atherosclerosis and restenosis involves responses to the surrounding microenvironment. SMCs obtained by enzymatic digestion from tunica media of newborn, young adult (YA) and old rats and from the thickened intima (TI) and underlying media of young adult rat aortas 15 days after ballooning were entrapped in floating populated collagen lattice (PCL). TI-SMCs elongated but were poor at PCL contraction and remodeling and expressed less alpha2 integrin compared to other SMCs that appeared more dendritic. During early phases of PCL contraction, SMCs showed a marked decrease in the expression of alpha-smooth muscle actin and myosin. SMCs other than TI-SMCs required 7 days to re-express alpha-smooth muscle actin and myosin. Only TI-SMCs in PCL were able to divide in 48 h, with a greater proportion in S and G2-M cell cycle phases compared to other SMCs. Anti-alpha2 integrin antibody markedly inhibited contraction but not proliferation in YA-SMC-PLCs; anti-alpha1 and anti-alpha2 integrin antibodies induced a similar slight inhibition in TI-SMC-PCLs. Finally, TI-SMCs rapidly migrated from PCL on plastic reacquiring their epithelioid phenotype. Heterogeneity in proliferation and cytoskeleton as well the capacity to remodel the extracellular matrix are maintained, when SMCs are suspended in PCLs.     

视黄醇结合蛋白4 对血管平滑肌细胞迁移和增殖的影响及机制

目的:研究视黄醇结合蛋白4(Retinol-binding protein 4,RBP4)对血管平滑肌细胞(SMCs)迁移和增殖的影响及分子机制。方法:体外培养大鼠主动脉SMCs,采用划痕实验及Boyden's迁移小室实验观察RBP4对SMCs迁移的影响,采用免疫印迹实验技术检测Akt的磷酸化水平,采用Boyden's小室实验观察PI3K抑制剂LY294002预处理细胞对RBP4促SMCs迁移的影响,应用MTT比色实验结合流式细胞仪技术,检测RBP4对SMCs细胞增殖及细胞周期的影响。结果:RBP4呈剂量依赖性诱导大鼠血管SMCs迁移(P0.05);RBP4处理细胞显著增加了Akt磷酸化;PI3K抑制剂LY294002预处理细胞则显著抑制了RBP4的促迁移作用(P0.05);RBP4处理有增加SMCs数量的趋势,且可轻微阻滞细胞进入S期,但未达到统计学显著性(P0.05)。结论:RBP4通过PI3K-Akt通路诱导大鼠血管SMCs迁移,对细胞增殖及细胞周期则无显著影响。