Cloning vector system forNocardia spp.

An electro-transformation system has been developed forNocardia asteroides andNocardia corallina by using aNocardia-Escherichia coli shuttle vector. The shuttle vector, named pCY104, was constructed by joining a 2.5-kb crypticN. asteroides plasmid pCY101 with theE. coli plasmid pIJ4625. The resistance genes for kanamycin, chloramphenicol, and thiostrepton on plasmid pCY104 were expressed inN. asteroides andN. corallina. The transformation method was optimized forN. asteroides, and transformation efficiency of 8×10⁴ transformants per g plasmid DNA was achieved routinely.     

High-frequency transformation ofLactobacillus casei with plasmid pHY300PLK by electroporation

To optimize the conditions for transformation ofLactobacillus casei ATCC 27092 cells with plasmid pHY300PLK, a shuttle vector forEscherichia coli andBacillus subtilis, by electroporation, we investigated the effects of the electrical parameters (voltage and resistance), the concentration of plasmid DNA, the cell age and density, the electroporation buffer, and other factors. Under optimal conditions of 2.0 kV, 100 ohm, and 25F, a transformation efficiency as high as 1.4×10⁷ transformants per g of plasmid DNA was obtained, with a survival rate of about 50%.L. casei YIT 9021, one of the PL-1 phage mutants of the ATCC 27092 strain, was also transformed with the same plasmid under optimal conditions. The transformants were confirmed to harbor the same intact plasmid molecules by agarose gel electrophoretic analysis.     

Optimized transformation by electroporation of Lactococcus lactis IL1403

Summary Rolling circle replication of plasmid pGKV21 in L. lactis was a more stable replication mode than the theta replication of plasmid pIL253. When the plasmid pGKV21 was used to develop and optimize transformation of L. lactis by electroporation, optimum transformation was obtained using dense suspension of late-exponential phase cells subjected to a high voltage (12.5 kV/cm) and a short pulse time (0.5 ms) in the presence of a plasmid DNA. With plasmid vector pGKV21, a transformation frequency of 2.2 × 10⁸ transformants per g of DNA was obtained.     

Bioconversion of linoleic acid into conjugated linoleic acid during fermentation and by washed cells of Lactobacillus reuteri

Conjugated linoleic acid (CLA) was produced at 300 mg l^–1 after 24 h culture of Lactobacillus reuteri in de Man–Rogosa–Sharpe medium containing 0.9 g linoleic acid (LA) l^–1 and 1.67% (v/v) Tween 80. CLA was mainly located in the extracellular space of the cells. Washed cells previously grown on LA were less active than unadapted washed cells in converting LA into CLA. Most of the CLA transformed by washed L. reuteri cells was located in cells or associated with cells. CLA production by washed L. reuteri cells was most efficient in conversion with 0.45 g LA l^–1 at pH 9.5 and 37°C for 1 h.     

Identification and cloning of a plasmid-encoded erythromycin resistance determinant from Lactobacillus reuteri

Plasmid analysis, plasmid curing, cloning, and hybridization experiments were used to study four Lactobacillus reuteri strains showing high resistance to erythromycin. Plasmid curing with acriflavine resulted in a loss of erythromycin resistance in a frequency of 1-10%. For three of the strains this was accompanied by a loss of a 6.9-MDa plasmid, which was shown to be identical for the different strains and designated pLUL631. The erythromycin (erm) gene was located on a 5.5-MDa plasmid in the fourth strain. A restriction map of pLUL631 was constructed and the location of the erm gene on the plasmid was identified by cloning in Escherichia coli. By using a Streptococcus lactis-E. coli shuttle vector, the erm gene was also transformed to S. lactis and expressed. The erm gene from L. reuteri was shown to be related to the erm gene from pIP501 (Streptococcus agalactiae) by DNA-DNA hybridization.     

Optimized transformation by electroporation ofLactobacillus plantarum strains with plasmid vectors

Summary Whole cell transformation ofLactobacillus plantarum CCM 1904 by electroporation was optimized. Pulse duration and electric field strength were shown to be important parameters: the optimum conditions were 12.5 kV/cm, a time-constant of 10 ms for an exponential decay waveform and 6.7 kV/cm applied during 2.5 ms for a square waveform. Transformation efficiency was increased if cells were cultivated on medium containing sorbitol and harvested during their early exponential growth phase: 8 × 10^–4 transformants/g pGK12 DNA per viable cell were obtained, with a survival rate of 10%–30% Cryotreatment by several freeze-and-thaw cycles decreased transformant yields. Transformation efficiency with different plasmids was studied and plasmid pGK12 was found to transformL. plantarum the most efficiently. Transformation by electroporation ofL. plantarum is strain dependent. The best results were obtained withL. plantarum NCIB 7220, giving 5 × 10⁶ transformants/gmg plasmid pGK12 DNA.     

Isolation and characterization of lambda phages carrying the basic replicon of the resistance plasmid R1

Summary Specialized transducing lambda phages, oriR1, harboring DNA from the resistance plasmid R1drd-19 and its copy mutant pKN103 were isolated. From measurements of CCC-DNA content it is concluded that upon infection the phages can establish themselves as self-replicating plasmids in recA hosts lysogenic for lambda. It is thought that this bypassing of lambda immunity is due to the presence of the R1 origin of replication. The plasmids are sensitive to the incompatibility expressed by plasmid R1. This has been shown mainly by transduction of oriR1 into recipients containing R1 plasmids or plasmid pBR322 carrying the basic replicon. We were able to demonstrate that a copy mutant of plasmid R1 was insensitive to copA ⁺, but sensitive to the conserted action of Pst1 fragments F₁ and F₂. This mutant was previously assumed to be of the dominant type. Physical mapping of the oriR1 derivatives verified that they carry the basic replicon of plasmid R1. The plasmids are not stably maintained, but are lost in a frequency of 1%–2% per cell generation, which is consistent with their lack of the R1par region.     

Influence of Different Functional Elements of Plasmid pGT232 on Maintenance of Recombinant Plasmids in Lactobacillus reuteri Populations In Vitro and In Vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Genetic transformation of Pseudomonas oleovorans by electroporation

An electroporation procedure for the transformation of Pseudomonas oleovorans was developed using a model plasmid, pCN51. The optimal electrotransformation was achieved with cells harvested at 45 to 60 min of growth and concentrated to a cell density of 5 OD600nm, plasmid concentration of 6 g per 100 l of cell suspension, and a 0.1-cm gap-width cuvette. Electroporation was performed at the settings of 250 , 25F and 2.5 kV. Transformation yields in the order of 103 colony-forming-unit per electroporation sample were obtained. This is a first report of the electroporation of the commercially valuable bacterium Ps. oleovorans. © Rapid Science Ltd. 1998     

NewAgrobacterium helper plasmids for gene transfer to plants

We describe the construction of new helper Ti plasmids forAgrobacterium-mediated plant transformation. These plasmids are derived from three differentAgrobacterium tumefaciens Ti plasmids, the octopine plasmid pTiB6, the nopaline plasmid pTiC58, and the L,L-succinamopine plasmid pTiBo542. The T-DNA regions of these plasmids were deleted using site-directed mutagenesis to yield replicons carrying thevir genes that will complement binary vectorsin trans. Data are included that demonstrate strain utility. The advantages ofAgrobacterium strains harbouring these disamed Ti plasmids for plant transformation viaAgrobacterium are discussed.     

Efficient transformation ofMicromonospora melanosporea protoplasts byStreptomyces plasmid

An efficient and relatively simple procedure forMicromonospora melanosporea protoplast preparation and transformation is described. Transformation ofM. melanosporea protoplast by theStreptomyces plasmid pIJ702 was optimized by altering parameters affecting the formation, regeneration, and transformation of protoplasts. Improvement of regeneration medium resulted in relatively quick growth of transformants (only 7 days). As a result of these experiments we describe a new transformation method that has routinely yielded 10⁶ transformants/µg plasmid DNA.     

Analysis of antimicrobial and immunomodulatory substances produced by heterofermentative <Emphasis Type="Italic">Lactobacillus reuteri</Emphasis>

Antimicrobial and immunomodulatory potential of various Lactobacillus reuteri strains is closely connected to their metabolite production profile under given cultivation conditions. We determined the in vitro production of antimicrobial substances such as organic acids, ethanol, and reuterin by four strains of L. reuteri (L. reuteri E, L. reuteri KO5, L. reuteri CCM 3625, and L. reuteri ATCC 55730). All studied L. reuteri strains showed the ability to produce lactic acid, acetic acid, and ethanol with concominant consumption of glucose and together with phenyllactic acid—a potent antifungal compound—with concominant consumption of phenylalanine. The reuterin production from glycerol was confirmed for all analyzed lactobacilli strains except L. reuteri CCM 3625. Production of organic acids, ethanol, and reuterin is significantly involved in antimicrobial activity of lactobacilli which was determined using the dual-culture overlay diffusion method against six indicator bacteria and five indicator moulds. In comparison to the referential L. reuteri ATCC 55730, the highest inhibition potential was observed against Escherichia coli CCM 3988 and Pseudomonas aeruginosa CCM 3955. Among analyzed indicators of moulds, the growth of Alternaria alternata CCM F-128 was the most inhibited by all four analyzed L. reuteri strains. Finally, the immunomodulatory potential of analyzed lactobacilli were proven by the determination of the in vitro production of biogenic amines histamine and tyramine. L. reuteri CCM 3625 was able to produce tyramine, and L. reuteri E and L. reuteri KO5 were able to produce histamine under given cultivation conditions.     

Benzyl-N-acetyl-α-d-galactosaminide inhibits the sialylation and the secretion of mucins by a mucin secreting HT-29 cell subpopulation

We have analysed the mucins synthesized by the HT-29 MTX cell subpopulation, derived from the HT-29 human colon carcinoma cells through a selective pressure with methotrexate (Lesuffleuret al., 1990,Cancer Res 50: 6334–43), in the presence of benzyl-N-acetyl--galactosaminide (GalNAc-O-benzyl), which is a potential competitive inhibitor of the 1,3-galactosyltransferase that synthesizes the T-antigen. The main observation was a 13-fold decrease in the sialic acid content of mucins after 24 h of exposure to 5mm GalNAc-O-benzyl. This effect was accompanied by an increased reactivity of these mucins to peanut lectin, testifying to the higher amount of T-antigen. The second observation was a decrease in the secretion of the mucins by GalNAc-O-benzyl treated cells. The decrease in mucin sialyation was achieved through thein situ -galactosylation of GalNAc-O-benzyl into Gal1–3GalNAc-O-benzyl, which acts as a competitive substrate of Gal1–3GalNAc 2,3-sialyltransferase, as shown by the intracellular accumulation of NeuAc2–3Gal1–3GalNAc-O-benzyl in treated cells.Abbreviations BSM bovine submaxillary mucin - MTX methotrexate - PBS sodium phosphate 10mm, NaCl 0.15m, pH 7.4 buffer - pNp p-nitrophenol - TBS Tris/HCl 10mm, NaCl 0.15m, pH 7.4 buffer Enzymes: CMP-NeuAc: Gal1–3/4GlcNAc 2,3-sialyltransferase, ST3(N), EC 2.4.99.6; CMP-NeuAc: Gal1–4GlcNAc 2,6-sialyltransferase, ST6(N), EC 2.4.99.1; CMP-NeuAc: Gal1–3GalNAc 2,3-sialyltransferase, ST3(O), EC 2.4.99.4; CMP-NeuAc: R-GalNAc1-O-Ser 2,6-sialyltransferase, ST6(O)-I, EC 2.4.99.3; CMP-NeuAc: NeuAc2–3Gal1–3GalNAc 2,6-sialyltransferase, ST6(O)-II, EC 2.4.99.7; UDP-GlcNAc: Gal1–3GalNAc-R·(GlcNAc to GalNAc) 1,6-N-acetylglucosaminyltransferase, EC 2.4.1.102; UDP-GlcNAc: GalNAc-R 1,3-N-acetylglucosaminyltransferase, EC 2.4.1.147; UDP-Gal: GalNAc-R 1,3-galactosyltransferase, EC 2.4.1.122.     

Electroporation of Bradyrhizobium japonicum

Summary Electroporation offers a fast, efficient and reproducible way to introduce DNA into bacteria. We have successfully used this technique to transform two commercially important strains of Bradyrhizobium japonicum, the nitrogen-fixing soybean symbiont. Initially, electroporation conditions were optimized using plasmid DNA which had been prepared from the same B. japonicum strain into which the{imDNA was to b}e transformed. Efficiencies of 10⁵-10⁶ transformants/g DNA were obtained for strains USDA 110 and 61A152 with ready-to-use frozen cells. Successful electroporation of B. japonicum with plasmid DNA prepared from Escherichia coli varied with the E. coli strain from which the plasmid was purified. The highest transformation efficiencies (10⁴ transformants/g DNA) were obtained using DNA prepared from a dcm ^– dam ^– strain of E. coli. This suggests that routine isolation of DNA from an E. coli strain incapable of DNA modification should help in increasing transformation efficiencies for other strains of bacteria where DNA restriction appears to be a significant obstacle to successful transformation. We have also monitored the rate of spontaneous mutation in electroporated cells and saw no significant difference in the frequency of streptomycin resistance for electroporated cells compared to control cells.     

Genetic transformation and regeneration of transgenic plants in grapevine (Vitis rupestris S.)

Isolated somatic embryos from petiole-derived callus cultures ofVitis rupestris Scheele have been employed in experiments on genetic transformation. Co-cultivation of somatic embryos during embryogenesis induction withAgrobacterium tumefaciens strain LBA4404, which contains the plasmid pBI121 carrying the neomycin phosphotranspherase and the-glucuronidase genes, produced transformed cellular lines capable of recurrent somatic embryogenesis. Precocious selection for high levels of kanamycin (100 mgl^-1) was an important part of our transformation protocol. Transformed lines still have strong-glucuronidase expression as well as stable insertion of the marker genes after 3 years of in-vitro culture, during which they have maintained their capacity to organize secondary embryos and to regenerate transgenic plants with an agreeable efficiency (13%).     

Stabilization of a plasmid-encoded LacZ phenotype inBacillus subtilis

Recombinant plasmid pCED3 was structurally unstable inBacillus subtilis cultures grown in the presence of kanamycin to eliminate the effects of segregational instability. Analysis of 96 modified plasmids indicated that deletions in the plasmid occur at many different sites. The presence of plasmid pCED3 slowed the growth rate of theB. subtilis host. Cells that contained modified plasmids grew faster than the parental cells and took over the population. Two different methodologies were developed to reduce the cultural instability of the plasmid-directed LacZ⁺ phenotype. By growing the cells in a medium that supports a low growth rate, the growth rate ratio between modified and parental cells was reduced, resulting in a partial stabilization (40 generations) of the LacZ⁺ phenotype in the population [35]. Removal of a 4.77 kbEcoRI fragment (which consists primarily of the pBR322 replicon) from plasmid pCED3 produced a more stable plasmid derivative, designated pYS1. Cells harboring plasmid pYS1 grew faster than pCED3-bearing cells, although the level of activity of -galactosidase was similar in both strains. By combining the two approaches (i.e., growth of pYS1-bearing cells in a medium that supports low growth rate), the LacZ⁺ phenotype was stably maintained in the cell population for over 170 generations. Under these conditions, there was no detectable difference between the growth rates of cells bearing the pYS1 plasmid and further modified plasmids.     

Replication and incompatibility properties of segments of the origin region of replication of the broad host range plasmid RK2

Summary Replication and incompatibility properties in Escherichia coli of DNA segments from the replication origin region of plasmid RK2 have been investigated. A 393 bp HpaII fragment, derived from the region of the RK2 origin of replication, carries an active origin when essential RK2 encoded functions are provided in trans and will form a mini RK2 replicon when linked to a non-replicating selective fragment. This small ori _RK2 plasmid cannot stably coexist with other functional RK2 replicons and is thus incompatible with RK2 replicons. However, the 393 bp ori _RK2 segment when cloned into a high copy number plasmid, where plasmid maintenance is no longer dependent on ori _RK2, does not interfere with maintenance of a resident RK2 replicon. This is in contrast to larger segments from the origin region that, when cloned at high copy number, cause the loss of a resident RK2 replicon. The apparent ability of the small HpaII ori_RK2 plasmid to displace resident RK2 replicons may indicate the turning on of one incompatibility mechanism only when replication from ori _RK2is required or may simply reflect the strong selective pressure for establishment of the incoming ori _RK2 plasmid and poor ability of the HpaII ori _RK2 plasmid to replicate in the presence of another RK2 replicon. The incompatibility expressed by the functional HpaII ori _RK2 may be designated inc ₁. The activity of a segment of RK2, cloned at high copy number, to eliminate a resident RK2 plasmid has been localized to a region of RK2 DNA, designated the inc ₂ region, to distinguish it from inc ₁, above, that overlaps but does not coincide with the 393 bp HpaII ori _RK2. This inc ₂ region also appears to be involved in segregation of RK2 derivatives since removal of a portion of this region results in both higher copy number and increased instability of the RK2 derivative. In addition to defining the region of the RK2 origin of replication, these results indicate that the ability to eliminate a resident RK2 replicon can be expressed by fragments, cloned at high copy number, that do not contain the complete ori _RK2. Also, only part of the inc ₂ region that appears to be responsible for efficient elimination of RK2 replicons by fragments cloned at high copy number is required for ori _RK2.     

A stable and efficient transformation system for Butyrivibrio fibrisolvens OB156

A 9.5-kb shuttle vector capable of replication and selection in both Escherichia coli and Butyrivibrio fibrisolvens was constructed. Plasmid pUC118 provided replication functions and ampicillin resistance selection in E. coli. In B. fibrisolvens, replication was controlled by the native plasmid pRJF1 from strain OB156, and selectability was provided by a 3.5-kb fragment of plasmid pAM1 containing the erythromycin resistance gene. Optimum conditions for transformation were 15 kV/cm, 2 h recovery, and plating in an agar overlay on medium containing 10 g erythromycin/ml. Maximum efficiency was 1.1×10⁵ transformants per g plasmid DNA (average 3×10⁴), and restriction mechanisms reduced efficiency by a factor of 2×10². Nonselective growth for 200 generations gave no measurable loss of plasmid.     

Transformation of spheroplasts and protoplasts of Corynebacterium glutamicum

Summary Spheroplasts were prepared from Corynebacterium glutamicum ATCC13032 by growing cells in the presence of glycine followed by digestion with lysozyme. Using pUL330 a spheroplast transformation system was established routinely yielding 10³ to 10⁴ transformants per g of plasmid DNA. Spheroplasts were converted into protoplasts after incubation with the lytic enzyme achromopeptidase in the presence of additional lysozyme. Protoplasts prepared by this method regenerated at efficiencies of 10 to 30%. A protoplast transformation system was established routinely yielding 10⁵ to 10⁶ transformants per g of plasmid DNA. The Escherichia coli Brevibacterium lactofermentum shuttle vector pUL62 prepared from E. coli could be introduced into spheroplasts of C. glutamicum after heat treatment at 48 to 49°C for 10 min.