Hook-associated proteins essential for flagellar filament formation in Salmonella typhimurium.

The hooks of the flagella of Salmonella typhimurium were purified by a newly developed method, using a flaL mutant without a filament, and the hook components were analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. As a result, we detected three protein species in addition to hook protein. We call these three proteins hook-associated proteins (HAPs). Their molecular weights were 59,000 for HAP1, 53,000 for HAP2, and 31,000 for HAP3. The HAP1/hook protein/HAP3/HAP2 molar ratio, calculated from their relative amounts and their molecular weights, was 1:10:1.1:0.53. The compositions of HAPs were analyzed in the hooks from the other filamentless mutants which were defective in H1 H2, flaV, flaU, or flaW. Hooks from the H1 H2 mutant had the same HAP composition as hooks from the flaL mutant. Hooks from the flaV mutants contained HAP1 and HAP3. Hooks from the flaU mutants contained HAP1. Hooks from the flaW mutants contained a very small amount of HAP3. From these results, the process of hook morphogenesis and the genes responsible for each step were postulated. Electron micrographs of hooks from the filamentless mutants showed that hooks which contained all three HAPs had a sharp clawlike tip, whereas hooks lacking any HAP had a flat tip. Electron micrographs of hooks treated with antibody against the hook protein showed that each claw-shaped end was not covered with antibody. These results strongly suggest that all three HAPs or at least some of them are located at the claw-shaped end and play an essential role in filament formation.     

Locations of hook-associated proteins in flagellar structures of Salmonella typhimurium.

Hooks of the flagella of Salmonella typhimurium were purified from an flaL mutant. Hook-associated proteins, namely HAP1, HAP2, and HAP3, were separated from them, and the antibody against each HAP was prepared. By immunoelectron microscopic observation, these three kinds of antiHAP antibodies were found to bind on the distal ends of hooks of filamentless mutants consistently with their composition of HAPs. The antiHAP2 antibody bound to the very tops of the claw-shaped ends of the hooks which contain all three HAPS. The antibodies against HAP1 and HAP3 bound to the basal areas and the middle areas, respectively, of the claw-shaped ends. The order of disassembly of the component proteins by heat treatment of the hook structure from the filamentless mutants was (HAP2, HAP3) greater than HAP1 greater than hook protein. These observations were consistent with our layered structure model: HAP1, HAP3, and HAP2 are assembled at the distal end of the hook in this sequence. All three HAPs were detected in the hook-filament complexes prepared from a flagellate strain. When the hook-filament structure was treated with antibody against HAP1 and with the anti-rabbit immunoglobulin G antibody, the antibody aggregate was observed in the region corresponding to the boundary between filament and hook. This observation strongly suggests that HAP1 is the protein connecting filament with hook. The locations of HAP2 and HAP3 in the hook-filament structure were not clarified with the same procedure.     

Functional analysis of a large non-conserved region of FlgK (HAP1) from <Emphasis Type="Italic">Rhodobacter sphaeroides</Emphasis>

The single subpolar flagellum of Rhodobacter sphaeroides shows an enlarged hook-filament junction. One of the two proteins that compose this section of the filament is HAP1 _Rs (FlgK _Rs ) it contains a central non-conserved region of 860 amino acids that makes this protein about three times larger than its homologue in Salmonella enterica serovar Typhimurium. We investigated the role of this central portion of the unusually large HAP1 protein of R. sphaeroides by monitoring the effects of serial deletions in flgK _Rs , the gene encoding HAP1 _Rs , on swimming and swarming. Two deletion mutants did not assemble functional flagella, two were paralyzed and five exhibited reduced free-swimming speeds. Some mutants produced unusual swarming patterns on soft agar without or with Ficoll 400. A segment of approximately 200-aa of the central region of HAP1 _Rs that aligns with the variable region of the flagellin sequence from other γ- and β-proteobacteria was also found. Therefore, it is possible that the origin of this large central domain of HAP1 _Rs could be associated with an event of horizontal transfer and subsequent duplications and/or insertions.     

Simultaneous display of multiple foreign peptides in the FliD capping and FliC filament proteins of the Escherichia coli flagellum

The bacterial flagellum is composed of more than 20 different proteins. The filament, which constitutes the major extracellular part of the flagellum, is built up of approximately 20,000 FliC molecules that assemble at the growing distal end of the filament. A capping structure composed of five FliD molecules located at the tip of the filament promotes polymerization of FliC. Lack of FliD leads to release of the subunits into the growth medium. We show here that FliD can be successfully used in bacterial surface display. We tested various insertion sites in the capping protein, and the optimal region for display was at the variable region in FliD. Deletion and/or insertion at other sites resulted in decreased formation of flagella. We further developed the technique into a multihybrid display system in which three foreign peptides are simultaneously expressed within the same flagellum, i.e., D repeats of FnBPA from Staphylococcus aureus at the tip and fragments of YadA from Yersinia enterocolitica as well as SlpA from Lactobacillus crispatus along the filament. This technology can have biotechnological applications, e.g., in simultaneous delivery of several effector molecules.     

Flagellar hook and hook-associated proteins of Salmonella typhimurium and their relationship to other axial components of the flagellum

Within the bacterial flagellum the basal-body rod, the hook, the hook-associated proteins (HAPs), and the helical filament constitute an axial substructure whose elements share structural features and a common export pathway. We present here the amino acid sequences of the hook protein and the three HAPs of Salmonella typhimurium, as deduced from the DNA sequences of their structural genes (flgE, flgK, flgL and fliD, respectively). We compared these sequences with each other and with those for the filament protein (flagellin) and four rod proteins, which have been described previously (Joys, 1985; Homma et al., 1990; Smith & Selander, 1990). Hook protein most strongly resembled the distal rod protein (FlgG) and the proximal HAP (HAP1), which are thought to be attached to the proximal and distal ends of the hook, respectively; the similarities were most pronounced near the N and C termini. Hook protein and flagellin, which occupy virtually identical helical lattices, did not resemble each other strongly but showed some limited similarities near their termini. HAP3 and HAP2, which form the proximal and distal boundaries of the filament, showed few similarities to flagellin, each other, or the other axial proteins. With the exceptions of the N-terminal region of HAP2, and the C-terminal region of flagellin, proline residues were absent from the terminal regions of the axial proteins. Moreover, with the exception of the N-terminal region of HAP2, the terminal regions contained hydrophobic residues at intervals of seven residues. Together, these observations suggest that the axial proteins may have amphipathic alpha-helical structure at their N and C termini. In the case of the filament and the hook, the terminal regions are believed to be responsible for the quaternary interactions between subunits. We suggest that this is likely to be true of the other axial structures as well, and specifically that interaction between N-terminal and C-terminal alpha-helices may be important in the formation of the axial structures of the flagellum. Although consensus sequences were noted among some of the proteins, such as the rod, hook and HAP1, no consensus extended to the entire set of axial proteins. Thus the basis for recognition of a protein for export by the flagellum-specific pathway remains to be identified.     

RecFOR Proteins Target RecA Protein to a DNA Gap with Either DNA or RNA at the 5′ Terminus: IMPLICATION FOR REPAIR OF STALLED REPLICATION FORKS*

The repair of single-stranded gaps in duplex DNA by homologous recombination requires the proteins of the RecF pathway. The assembly of RecA protein onto gapped DNA (gDNA) that is complexed with the single-stranded DNA-binding protein is accelerated by the RecF, RecO, and RecR (RecFOR) proteins. Here, we show the RecFOR proteins specifically target RecA protein to gDNA even in the presence of a thousand-fold excess of single-stranded DNA (ssDNA). The binding constant of RecF protein, in the presence of the RecOR proteins, to the junction of ssDNA and dsDNA within a gap is 1–2 nm, suggesting that a few RecF molecules in the cell are sufficient to recognize gDNA. We also found that the nucleation of a RecA filament on gDNA in the presence of the RecFOR proteins occurs at a faster rate than filament elongation, resulting in a RecA nucleoprotein filament on ssDNA for 1000–2000 nucleotides downstream (5′ → 3′) of the junction with duplex DNA. Thus, RecA loading by RecFOR is localized to a region close to a junction. RecFOR proteins also recognize RNA at the 5′-end of an RNA-DNA junction within an ssDNA gap, which is compatible with their role in the repair of lagging strand gaps at stalled replication forks.     

Simultaneous Display of Multiple Foreign Peptides in the FliD Capping and FliC Filament Proteins of the Escherichia coli Flagellum

The bacterial flagellum is composed of more than 20 different proteins. The filament, which constitutes the major extracellular part of the flagellum, is built up of approximately 20,000 FliC molecules that assemble at the growing distal end of the filament. A capping structure composed of five FliD molecules located at the tip of the filament promotes polymerization of FliC. Lack of FliD leads to release of the subunits into the growth medium. We show here that FliD can be successfully used in bacterial surface display. We tested various insertion sites in the capping protein, and the optimal region for display was at the variable region in FliD. Deletion and/or insertion at other sites resulted in decreased formation of flagella. We further developed the technique into a multihybrid display system in which three foreign peptides are simultaneously expressed within the same flagellum, i.e., D repeats of FnBPA from Staphylococcus aureus at the tip and fragments of YadA from Yersinia enterocolitica as well as SlpA from Lactobacillus crispatus along the filament. This technology can have biotechnological applications, e.g., in simultaneous delivery of several effector molecules.     

Identification and localization of flagellins FlaA and FlaB3 within flagella of Methanococcus voltae

Methanococcus voltae possesses four flagellin genes, two of which (flaB1 and flaB2) have previously been reported to encode major components of the flagellar filament. The remaining two flagellin genes, flaA and flaB3, are transcribed at lower levels, and the corresponding proteins remained undetected prior to this work. Electron microscopy examination of flagella isolated by detergent extraction of whole cells revealed a curved, hook-like region of varying length at the end of a long filament. Enrichment of the curved region of the flagella resulted in the identification of FlaB3 by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and N-terminal sequencing, and the localization of this flagellin to the cell-proximal portion of the flagellum was confirmed through immunoblotting and immunoelectron microscopy with FlaB3-specific antibodies, indicating that FlaB3 likely composes the curved portion of the flagella. This could represent a unique case of a flagellin performing the role of the bacterial hook protein. FlaA-specific antibodies were used in immunoblotting to determine that FlaA is found throughout the flagellar filament. M. voltae cells were transformed with a modified flaA gene containing a hemagglutinin (HA) tag introduced into the variable region. Transformants that had replaced the wild-type copy of the flaA gene with the HA-tagged version incorporated the HA-tagged version of FlaA into flagella which appeared normal by electron microscopy.     

Molecular Cloning and Subcellular Localization of Tektin2-Binding Protein 1 (Ccdc 172) in Rat Spermatozoa

Tektins (TEKTs) are composed of a family of filament-forming proteins localized in cilia and flagella. Five types of mammalian TEKTs have been reported, all of which have been verified to be present in sperm flagella. TEKT2, which is indispensable for sperm structure, mobility, and fertilization, was present at the periphery of the outer dense fiber (ODF) in the sperm flagella. By yeast two-hybrid screening, we intended to isolate flagellar proteins that could interact with TEKT2, which resulted in the isolation of novel two genes from the mouse testis library, referred as a TEKT2-binding protein 1 (TEKT2BP1) and -protein 2 (TEKT2BP2). In this study, we characterized TEKT2BP1, which is registered as a coiled-coil domain-containing protein 172 (Ccdc172) in the latest database. RT-PCR analysis indicated that TEKT2BP1 was predominantly expressed in rat testis and that its expression was increased after 3 weeks of postnatal development. Immunocytochemical studies discovered that TEKT2BP1 localized in the middle piece of rat spermatozoa, predominantly concentrated at the mitochondria sheath of the flagella. We hypothesize that the TEKT2-TEKT2BP1 complex might be involved in the structural linkage between the ODF and mitochondria in the middle piece of the sperm flagella.     

Effect of Hook Subunit Concentration on Assembly and Control of Length of the Flagellar Hook of Salmonella

The flagellar hook of Salmonella is a filamentous polymer made up of subunits of the protein FlgE. Hook assembly is terminated when the length reaches about 55 nm. After our recent study of the effect of cellular levels of the hook length control protein FliK, we have now analyzed the effect of cellular levels of FlgE itself. When FlgE was overproduced in a wild-type strain, a fliC (flagellin) mutant, or a fliD (hook-associated protein 2 [HAP2], filament capping protein) mutant, the hooks remained at the wild-type length. In a fliK (hook length control protein) mutant, which produces long hooks (polyhooks), the overproduction of FlgE resulted in extraordinarily long hooks (superpolyhooks). In a flgK (HAP1, first hook-filament junction protein) mutant or a flgL (HAP3, second hook-filament junction protein) mutant, the overproduction of FlgE also resulted in longer than normal hooks. Thus, at elevated hook protein levels not only FliK but also FlgK and FlgL are necessary for the proper termination of hook elongation. When FlgE was severely underproduced, basal bodies without hooks were often observed. However, those hooks that were seen were of wild-type length, demonstrating that FlgE underproduction decreases the probability of the initiation of hook assembly but not the extent of hook elongation.     

Genetic and molecular characterization of the polar flagellum of Vibrio parahaemolyticus.

Vibrio parahaemolyticus possesses two alternate flagellar systems adapted for movement under different circumstances. A single polar flagellum propels the bacterium in liquid (swimming), while multiple lateral flagella move the bacterium over surfaces (swarming). Energy to rotate the polar flagellum is derived from the sodium membrane potential, whereas lateral flagella are powered by the proton motive force. Lateral flagella are arranged peritrichously, and the unsheathed filaments are polymerized from a single flagellin. The polar flagellum is synthesized constitutively, but lateral flagella are produced only under conditions in which the polar flagellum is not functional, e.g., on surfaces. This work initiates characterization of the sheathed, polar flagellum. Four genes encoding flagellins were cloned and found to map in two loci. These genes, as well as three genes encoding proteins resembling HAPs (hook-associated proteins), were sequenced. A potential consensus polar flagellar promoter was identified by using upstream sequences from seven polar genes. It resembled the enterobacterial sigma 28 consensus promoter. Three of the four flagellin genes were expressed in Escherichia coli, and expression was dependent on the product of the fliA gene encoding sigma 28. The fourth flagellin gene may be different regulated. It was not expressed in E. coli, and inspection of upstream sequence revealed a potential sigma 54 consensus promoter. Mutants with single and multiple defects in flagellin genes were constructed in order to determine assembly rules for filament polymerization. HAP mutants displayed new phenotypes, which were different from those of Salmonella typhimurium and most probably were the result of the filament being sheathed.     

CDKL5 regulates flagellar length and localizes to the base of the flagella in Chlamydomonas

The length of Chlamydomonas flagella is tightly regulated. Mutations in four genes—LF1, LF2, LF3, and LF4—cause cells to assemble flagella up to three times wild-type length. LF2 and LF4 encode protein kinases. Here we describe a new gene, LF5, in which null mutations cause cells to assemble flagella of excess length. The LF5 gene encodes a protein kinase very similar in sequence to the protein kinase CDKL5. In humans, mutations in this kinase cause a severe form of juvenile epilepsy. The LF5 protein localizes to a unique location: the proximal 1 μm of the flagella. The proximal localization of the LF5 protein is lost when genes that make up the proteins in the cytoplasmic length regulatory complex (LRC)—LF1, LF2, and LF3—are mutated. In these mutants LF5p becomes localized either at the distal tip of the flagella or along the flagellar length, indicating that length regulation involves, at least in part, control of LF5p localization by the LRC.     

RPGR-ORF15, which is mutated in retinitis pigmentosa, associates with SMC1, SMC3, and microtubule transport proteins

Mutations in the retinitis pigmentosa GTPase regulator (RPGR) gene account for almost 20% of patients with retinitis pigmentosa. Most mutations are detected in alternatively spliced RPGR-ORF15 isoform(s), which are primarily but not exclusively expressed in the retina. We show that, in addition to the axoneme, the RPGR-ORF15 protein is localized to the basal bodies of photoreceptor connecting cilium and to the tip and axoneme of sperm flagella. Mass spectrometric analysis of proteins that were immunoprecipitated from the retinal axoneme-enriched fraction using an anti-ORF15 antibody identified two chromosome-associated proteins, structural maintenance of chromosomes (SMC) 1 and SMC3. Using pulldown assays, we demonstrate that the interaction of RPGR with SMC1 and SMC3 is mediated, at least in part, by the RCC1-like domain of RPGR. This interaction was not observed with phosphorylation-deficient mutants of SMC1. Both SMC1 and SMC3 localized to the cilia of retinal photoreceptors and Madin-Darby canine kidney cells, suggesting a broader physiological relevance of this interaction. Additional immunoprecipitation studies revealed the association of RPGR-ORF15 isoform(s) with the intraflagellar transport polypeptide IFT88 as well as microtubule motor proteins, including KIF3A, p150Glued, and p50-dynamitin. Inhibition of dynein function by overexpressing p50 abrogated the localization of RPGR-ORF15 to basal bodies. Taken together, these results provide novel evidence for the possible involvement of RPGR-ORF15 in microtubule organization and regulation of transport in primary cilia.     

Q & A. [interview

Joel Rosenbaum was born and grew up in Massena, New York state, on the St Lawrence River border with Ontario, Canada. He received his undergraduate and PhD degrees from Syracuse University, and a Masters Degree in high school biology teaching at St Lawrence University. His PhD work was done with the protozoologist, George Holz Jr, and his post doctoral research on cilia and flagella was at the University Of Chicago with Frank Child and Hewson Swift. He has been at Yale University for 37 years where he has taught Cell Biology. His research has been on the synthesis and assembly of the proteins of cilia and flagella, showing that the flagellar axoneme assembles at the distal tip and that detachment of the flagella upregulates the genes for flagellar proteins. More recently his group has shown that this tip assembly process is facilitated by a rapid kinesin and cytoplasmic dynein-mediated motility underneath the flagellar membrane called ‘intraflagellar transport’. He is a runner with more than 20 marathons under his belt.     

Le spermatozoide de Ophidion sp. (Poisson,téléostéen): Particularités ultrastructurales du flagelle

The spermatozoon of Ophidion sp. possesses an elongated nucleus 8 μm long, a short midpiece (0,6 μm), and a long flagellum (100 μm). The flagellar membrane extends in the form of two diametrically opposed sidefins. Evolving spermatids and spermatozoa are found in the lumen of the seminiferous tubes. The sections of flagella show filamentary and tubular elements disposed parallel to the axoneme microtubules. We have divided the flagella into three types. In type 1 the tip of the sidefins contains 20 to 30 filaments 5 run in diameter and between these and the axoneme 20 to 30 tubular elements 15 to 20 nm in diameter. Type 2 possesses a dense cytoplasm and a few tubular elements 10 nm in diameter disposed at the tip of the sidefins. Type 3 contains a cytoplasm which is not dense and in which we found polysaccharides and 1 to 8 tubular elements forming a palisade which lines the plasma membrane at the tip of the sidefins. We interpret these three types as three successive stages in the organization of the flagellum during spermiogenesis. Type 3 corresponds to the spermatic flagellum. These 10-nm-diameter tubules do not have the same chemical composition as the microtubules. Elements of the cytoskeleton serve as a support for the sidefins.     

BRICK1 is required for apical cell growth in filaments of the moss Physcomitrella patens but not for gametophore morphology

When BRK1, a member of the Wave/SCAR complex, is deleted in Physcomitrella patens (Deltabrk1), we report a striking reduction of filament growth resulting in smaller and fewer cells with misplaced cross walls compared with the normal protonemal cells. Using an inducible green fluorescent protein-talin to detect actin in living tissue, a characteristic broad accumulation of actin is observed at the tip of wild-type apical cells, whereas in Deltabrk1, smaller, more distinct foci of actin are present. Insertion of brk1-yfp into Deltabrk1 rescues the mutant phenotype and results in BRK1 being localized only in the tip of apical cells, the exclusive site of cell extension and division in the filament. Like BRK1, ARPC4 and At RABA4d are normally localized at the tip of apical cells and their localization is correlated with rapid tip growth in filaments. However, neither marker accumulates in apical cells of Deltabrk1 filaments. Although the Deltabrk1 phenotypes in protonema are severe, the leafy shoots or gametophores are normally shaped but stunted. These and other results suggest that BRK1 functions directly or indirectly in the selective accumulation/stabilization of actin and other proteins required for polar cell growth of filaments but not for the basic structure of the gametophore.     

A protein methylation pathway in Chlamydomonas flagella is active during flagellar resorption

During intraflagellar transport (IFT), the regulation of motor proteins, the loading and unloading of cargo and the turnover of flagellar proteins all occur at the flagellar tip. To begin an analysis of the protein composition of the flagellar tip, we used difference gel electrophoresis to compare long versus short (i.e., regenerating) flagella. The concentration of tip proteins should be higher relative to that of tubulin (which is constant per unit length of the flagellum) in short compared with long flagella. One protein we have identified is the cobalamin-independent form of methionine synthase (MetE). Antibodies to MetE label flagella in a punctate pattern reminiscent of IFT particle staining, and immunoblot analysis reveals that the amount of MetE in flagella is low in full-length flagella, increased in regenerating flagella, and highest in resorbing flagella. Four methylated proteins have been identified in resorbing flagella, using antibodies specific for asymmetrically dimethylated arginine residues. These proteins are found almost exclusively in the axonemal fraction, and the methylated forms of these proteins are essentially absent in full-length and regenerating flagella. Because most cells resorb cilia/flagella before cell division, these data indicate a link between flagellar protein methylation and progression through the cell cycle.     

Cross-reactivity of antibodies specific for flagellar tektin and intermediate filament subunits

Monoclonal antibodies specific for each of the flagellar tektins were prepared and used to determine whether structures similar to tektin filaments are present in cells lacking cilia or flagella. This analysis was performed by double-label immunofluorescence microscopy of several cell lines and by immunoblots of protein fractions. Two of the four anti-tektin antibodies, the antibodies 3-7-1 and 3-10-1, which bind different epitopes of the C-tektin, label 3T3, HeLa, PtK2, and BHK-21 cells as well as myotubes. The antibody 3-7-1 stains intermediate filament structures in the cells and binds vimentin or desmin in preparations of cytoskeletal proteins; whereas the antibody 3-10-1 stains nuclear envelopes in the cells and binds lamin A and C in preparations of cytoskeletal proteins or nuclear lamina. Structural similarities between the C-tektin and intermediate filament proteins probably are extended to more than two epitopes because polyclonal antibodies anti-vimentin and anti-desmin bind to C-tektin. These polyclonal antibodies also bind to A-tektin. The cross-reaction of monoclonal and polyclonal antibodies binding to epitopes in tektin and intermediate filament components and the existence of a high content of alpha-helical structure in the tektin subunits (Linck, R. W., and G. L. Langevin, 1982, J. Cell Sci., 58:1-22) indicate that tektin and intermediate filaments are homologous in several parts of their structure.     

Single-particle imaging reveals intraflagellar transport–independent transport and accumulation of EB1 in Chlamydomonas flagella

The microtubule (MT) plus-end tracking protein EB1 is present at the tips of cilia and flagella; end-binding protein 1 (EB1) remains at the tip during flagellar shortening and in the absence of intraflagellar transport (IFT), the predominant protein transport system in flagella. To investigate how EB1 accumulates at the flagellar tip, we used in vivo imaging of fluorescent protein–tagged EB1 (EB1-FP) in Chlamydomonas reinhardtii. After photobleaching, the EB1 signal at the flagellar tip recovered within minutes, indicating an exchange with unbleached EB1 entering the flagella from the cell body. EB1 moved independent of IFT trains, and EB1-FP recovery did not require the IFT pathway. Single-particle imaging showed that EB1-FP is highly mobile along the flagellar shaft and displays a markedly reduced mobility near the flagellar tip. Individual EB1-FP particles dwelled for several seconds near the flagellar tip, suggesting the presence of stable EB1 binding sites. In simulations, the two distinct phases of EB1 mobility are sufficient to explain its accumulation at the tip. We propose that proteins uniformly distributed throughout the cytoplasm like EB1 accumulate locally by diffusion and capture; IFT, in contrast, might be required to transport proteins against cellular concentration gradients into or out of cilia.     

AFR1 promotes polarized apical morphogenesis in Saccharomyces cerevisiae.

The G protein-coupled alpha-factor receptor promotes polarized growth toward a mating partner. alpha-Factor induces the expression of AFR1, which acts together with the receptor C terminus to promote normal morphogenesis. The function of AFR1 was investigated by engineering cells to constitutively express AFR1 without alpha-factor. Constitutive AFR1 expression caused cells to form elongated buds that demonstrate that AFR1 can also interact with the morphogenesis components that promote bud formation. A similar elongated bud phenotype is caused by mutation of the CDC3, CDC10, CDC11, and CDC12 genes, which encode putative filament proteins that form a ring at the bud neck. AFR1 may act directly on the filament proteins, since immunolocalization detected AFR1 at the bud neck and interaction of AFR1 and CDC12 was detected in the two-hybrid protein assay. AFR1 localized to the base of pheromone-induced projections. These results suggest that AFR1 and the putative filament proteins act together with the receptor to facilitate proper localization of components during mating.