Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

Exogenous isolation of antibiotic resistance plasmids from piggery manure slurries reveals a high prevalence and diversity of IncQ-like plasmids

Antibiotic resistance plasmids were exogenously isolated in biparental matings with piggery manure bacteria as plasmid donors in Escherichia coli CV601 and Pseudomonas putida UWC1 recipients. Surprisingly, IncQ-like plasmids were detected by dot blot hybridization with an IncQ oriV probe in several P. putida UWC1 transconjugants. The capture of IncQ-like plasmids in biparental matings indicates not only their high prevalence in manure slurries but also the presence of efficiently mobilizing plasmids. In order to elucidate unusual hybridization data (weak or no hybridization with IncQ repB or IncQ oriT probes) four IncQ-like plasmids (pIE1107, pIE1115, pIE1120, and pIE1130), each representing a different EcoRV restriction pattern, were selected for a more thorough plasmid characterization after transfer into E. coli K-12 strain DH5alpha by transformation. The characterization of the IncQ-like plasmids revealed an astonishingly high diversity with regard to phenotypic and genotypic properties. Four different multiple antibiotic resistance patterns were found to be conferred by the IncQ-like plasmids. The plasmids could be mobilized by the RP4 derivative pTH10 into Acinetobacter sp., Ralstonia eutropha, Agrobacterium tumefaciens, and P. putida, but they showed diverse patterns of stability under nonselective growth conditions in different host backgrounds. Incompatibility testing and PCR analysis clearly revealed at least two different types of IncQ-like plasmids. PCR amplification of total DNA extracted directly from different manure samples and other environments indicated the prevalence of both types of IncQ plasmids in manure, sewage, and farm soil. These findings suggest that IncQ plasmids play an important role in disseminating antibiotic resistance genes.     

Nucleotide Sequence and Genetic Characterization of the Novel IncQ-like Plasmid pIE1107

The analysis of the complete nucleotide sequence of the small resistance plasmid pIE1107 revealed a close similarity to the well-known IncQ plasmids. Highly conserved replication proteins and nearly identical origins of replication (oriV) suggest equivalent functions in the related replication systems. However, pIE1107 contains two copies of IncQ-oriV-like DNA which are slightly different regarding the iterons. Upon deletion of a silent copy of IncQ-oriV-like DNA the resulting plasmid is fully compatible with IncQ plasmids, indicating that there is no mutual communication between the replication control of the respective replicons. Experiments with clonedoriV DNA strongly suggest that the replication initiation protein of pIE1107 has specialized into the distinct target-iterons of its ownoriV which differs only by a few nucleotides from theoriV of IncQ plasmids. Implications from the apparent highly specific protein–DNA recognition and from the incompatibility properties of pIE1107 for the evolution of a family of compatible, IncQ-like plasmids are discussed.     

Positioning and the specific sequence of each 13-mer motif are critical for activity of the plasmid RK2 replication origin

The minimal replication origin of the broad-host-range plasmid RK2, oriV, contains five iterons which are binding sites for the plasmid-encoded replication initiation protein TrfA, four DnaA boxes, which bind the host DnaA protein, and an AT-rich region containing four 13-mer sequences. In this study, 26 mutants with altered sequence and/or spacing of 13-mer motifs have been constructed and analysed for replication activity in vivo and in vitro. The data show that the replacement of oriV 13-mers by similar but not identical 13-mer sequences from Escherichia coli oriC inactivates the origin. In addition, interchanging the positions of the oriV 13-mers results in greatly reduced activity. Mutants with T/A substitutions are also inactive. Furthermore, introduction of single-nucleotide substitutions demonstrates very restricted sequence requirements depending on the 13-mer position. Only two of the mutants are host specific, functional in Pseudomonas aeruginosa but not in E. coli. Our experiments demonstrate considerable complexity in the plasmid AT-rich region architecture required for functionality. It is evident that low internal stability of this region is not the only feature contributing to origin activity. Our studies suggest a requirement for sequence-specific protein interactions within the 13-mers during assembly of replication complexes at the plasmid origin.     

A new IncQ plasmid R89S: Properties and genetic organization

The new small (8.18 kb) streptomycin-resistant multicopy plasmid R89S of the Q group incompatibility is described. In contrast to other IncQ plasmids, replication of R89S is dependent on DNA polymerase 1 and proceeds in the absence of de novo protein synthesis. According to our data up to now, the host spectrum of the plasmid R89S is limited to Enterobacteriaceae. A genetic map of the plasmid R89S has been prepared through the construction of deletion and insertion derivatives. Phenotypic analysis of these derivatives has identified the location of genes encoding resistance to streptomycin, and the region essential for mobilization of R89S. The origin of vegetative replication has been located within a 0.7-kb fragment. Another region highly homologous to oriV of the plasmid RSF1010, but not functioning as an origin of replication, was localized. Two regions involved in the expression of incompatibility have also been identified. The data from the restriction analyses, DNA-DNA hybridization, and genetic experiments enable us to assume that the plasmid R89S is a naturally occurring recombinant between part of an IncQ plasmid and another narrow host range replicon of unknown incompatibility group.     

A molecular analysis of a broad-host-range plasmid isolated from Thiobacillus ferrooxidans

Abstract: A 12.4-kb plasmid, pTF-FC2, that was isolated from Thiobacillus ferrooxidans and which is capable of replication in a wide range of Gram-negative bacteria, has been sequenced. The extent of the regions involved in both replication and mobilization have been delineated. The site of initiation of replication ( oriV ) has been localized on a 185-bp fragment and the origin of transfer ( oriT ) on a 138-bp fragment. Three proteins that were essential for replication and four that were essential for mobilization have been identified. The origin of replication was clearly similar to that of the IncQ plasmids although no complementation or incompatibility between pTF-FC2 and the IncQ plasmid, R300B, was detected. There was a clear similarity in the size,location and amino acid sequence of the proteins of the pTF-FC2 mobilization region with those of the TraI region of the IncP plasmids, RP4 and R751.Two inverted repeated sequences which had 37/38-bp and 38/38-bp sequence identity with the Tn 21 transposon were identified. The C-terminal part of a transposase and the N-terminal portion of a resolvase were located between the inverted repeats. These open reading frames are most likely the remnants of a defective transposon. A protein with homology to a mercury- resistance regulator was also present within the transposon-like element although no gene encoding for mercury reductase could be indentified.     

Exogenous Isolation of Antibiotic Resistance Plasmids from Piggery Manure Slurries Reveals a High Prevalence and Diversity of IncQ-Like Plasmids

Antibiotic resistance plasmids were exogenously isolated in biparental matings with piggery manure bacteria as plasmid donors in Escherichia coli CV601 and Pseudomonas putida UWC1 recipients. Surprisingly, IncQ-like plasmids were detected by dot blot hybridization with an IncQ oriV probe in several P. putida UWC1 transconjugants. The capture of IncQ-like plasmids in biparental matings indicates not only their high prevalence in manure slurries but also the presence of efficiently mobilizing plasmids. In order to elucidate unusual hybridization data (weak or no hybridization with IncQ repB or IncQ oriT probes) four IncQ-like plasmids (pIE1107, pIE1115, pIE1120, and pIE1130), each representing a different EcoRV restriction pattern, were selected for a more thorough plasmid characterization after transfer into E. coli K-12 strain DH5α by transformation. The characterization of the IncQ-like plasmids revealed an astonishingly high diversity with regard to phenotypic and genotypic properties. Four different multiple antibiotic resistance patterns were found to be conferred by the IncQ-like plasmids. The plasmids could be mobilized by the RP4 derivative pTH10 into Acinetobacter sp., Ralstonia eutropha, Agrobacterium tumefaciens, and P. putida, but they showed diverse patterns of stability under nonselective growth conditions in different host backgrounds. Incompatibility testing and PCR analysis clearly revealed at least two different types of IncQ-like plasmids. PCR amplification of total DNA extracted directly from different manure samples and other environments indicated the prevalence of both types of IncQ plasmids in manure, sewage, and farm soil. These findings suggest that IncQ plasmids play an important role in disseminating antibiotic resistance genes.     

Increased abundance of IncP-1beta plasmids and mercury resistance genes in mercury-polluted river sediments: first discovery of IncP-1beta plasmids with a complex mer transposon as the sole accessory element

Although it is generally assumed that mobile genetic elements facilitate the adaptation of microbial communities to environmental stresses, environmental data supporting this assumption are rare. In this study, river sediment samples taken from two mercury-polluted (A and B) and two nonpolluted or less-polluted (C and D) areas of the river Nura (Kazakhstan) were analyzed by PCR for the presence and abundance of mercury resistance genes and of broad-host-range plasmids. PCR-based detection revealed that mercury pollution corresponded to an increased abundance of mercury resistance genes and of IncP-1beta replicon-specific sequences detected in total community DNA. The isolation of IncP-1beta plasmids from contaminated sediments was attempted in order to determine whether they carry mercury resistance genes and thus contribute to an adaptation of bacterial populations to Hg pollution. We failed to detect IncP-1beta plasmids in the genomic DNA of the cultured Hg-resistant bacterial isolates. However, without selection for mercury resistance, three different IncP-1beta plasmids (pTP6, pTP7, and pTP8) were captured directly from contaminated sediment slurry in Cupriavidus necator JMP228 based on their ability to mobilize the IncQ plasmid pIE723. These plasmids hybridized with the merRTDeltaP probe and conferred Hg resistance to their host. A broad host range and high stability under conditions of nonselective growth were observed for pTP6 and pTP7. The full sequence of plasmid pTP6 was determined and revealed a backbone almost identical to that of the IncP-1beta plasmids R751 and pB8. However, this is the first example of an IncP-1beta plasmid which had acquired only a mercury resistance transposon but no antibiotic resistance or biodegradation genes. This transposon carries a rather complex set of mer genes and is inserted between Tra1 and Tra2.     

Comparison of 10 IncP plasmids: homology in the regions involved in plasmid replication.

We have examined the DNA homology in the replication regions of 10 IncP plasmids independently isolated from several different countries. Two regions of RK2, the best-studied plasmid of this group, are required for vegetative DNA replication: the origin of replication (oriV) and the trfA region, which codes for a gene product necessary for replication. Six of nine IncP plasmids studied were identical to RK2 in the oriV and trfA regions as shown by Southern hybridization. Three P plasmids, R751, R772, and R906, showed weaker homology with the RK2 trfA, region and hybridized to different-sized HaeII fragments than the other six plasmids. R751, R772, and R906 hybridized to the region of the RK2 replication origin which expresses P incompatibility but differed markedly from RK2 and the other six plasmids in the GC-rich region of the origin required for replication. These data indicate that the P-group plasmids can be divided into two subgroups: IncP alpha, which includes the RK2-like plasmids, and IncP beta which includes the R751-like plasmids.     

Regions of broad-host-range plasmid RK2 which are essential for replication and maintenance.

The sites of cleavage on the map of the broad-host-range plasmid RK2 (56 kilobases) were determined for the BglII, PstI, and SmaI restriction enzymes, and the determinants for tetracycline and ampicillin resistance were localized. The cleavage sites were clustered at or near the drug resistance genes. To localize regions required for plasmid replication and maintenance in Escherichia coli, we deleted nonessential regions of RK2 by partial digestion with the restriction endonuclease HaeII to produce small derivatives. The smallest stable replicon obtained contained five HaeII fragments of RK2 which total 5.4 kilobases. These fragments were derived from three regions of RK2 that are separated from each other by antibiotic resistance genes. One of these HaeII fragments (0.75 kilobases) has the properties expected of the origin of replication. The outer four fragments, located in two separate regions of RK2, were found to provide, in trans, functions that permit the replication of the HaeII fragment carrying the origin of the replication. These results indicate that at least two plasmid-encoded genes, capable of acting in trans, and a replication origin are required for RK2 replication and maintenance.     

Identification and characterization of a native Dichelobacter nodosus plasmid, pDN1

The gram-negative anaerobe Dichelobacter nodosus is the primary causative agent of ovine footrot, a mixed bacterial infection of the hoof. We report here the characterization of a novel native plasmid, pDN1, from D. nodosus. Sequence analysis has revealed that pDN1 has a high degree of similarity to broad-host-range plasmids belonging, or related, to Escherichia coli incompatibility group Q. However, in contrast to these plasmids, pDN1 encodes no antibiotic resistance determinants, lacks genes E and F, and hence is smaller than all previously reported IncQ plasmids. In addition, pDN1 belongs to a different incompatibility group than the IncQ plasmids to which it is related. However, pDN1 does contain the replication and mobilization genes that are responsible for the extremely broad host range characteristic of IncQ plasmids, and derivatives of pDN1 replicate in E. coli. In addition, the mobilization determinants of pDN1 are functional, since derivatives of pDN1 are mobilized by the IncPalpha plasmid RP4 in E. coli.     

Analysis of pCU1 replication origins: dependence of oriS on the plasmid-encoded replication initiation protein RepA

The broad-host-range replicon of the plasmid pCU1 has three origins of vegetative replication called oriB, oriS, and oriV. In the multi-origin replicon, individual origins can distinguish among replication factors provided by the host. It has been found that during replication in Escherichia coli polA(-) host, oriS was the only active origin of a mutant pCU1 derivative bearing a mutation in the gene encoding replication initiation protein RepA. To further investigate the capacity of oriS to function in an E. coli polA(-) host we constructed a number of clones of the basic replicon of pCU1 containing oriS as the only replication origin. An oriS construct created with pUC18 could transform the polA(-) strain when RepA was supplied in trans. When the oriS region (between nucleotides 290 and 832) was ligated to an antibiotic resistance Omega fragment, the construct could be recovered as a plasmid from polA(+) strain if functional RepA was provided in trans. Our results therefore indicate that the basic replicon of pCU1, containing oriS as the sole origin, does require RepA to initiate plasmid replication in E. coli     

Genetic and functional analysis of the basic replicon of pPS10, a plasmid specific for Pseudomonas isolated from Pseudomonas syringae patovar savastanoi.

The sequence of a 1823 base-pair region containing the replication functions of pPS10, a narrow host-range plasmid isolated from a strain of Pseudomonas savastanoi, is reported. The origin of replication, oriV, or pPS10 is contained in a 535 base-pair fragment of this sequence that can replicate in the presence of trans-acting function(s) of the plasmid. oriV contains four iterons of 22 base-pairs that are preceded by G+C-rich and A+T-rich regions. A dnaA box located adjacent to the repeats of the origin is dispensable but required for efficient replication of pPS10; A and T are equivalent bases at the 5' end of the box. repA, the gene of a trans-acting replication protein of 26,700 Mr has been identified by genetic and functional analysis. repA is adjacent to the origin of replication and is preceded by the consensus sequences of a typical sigma 70 promoter of Escherichia coli. The RepA protein has been identified, using the minicell system of E. coli, as a polypeptide with an apparent molecular mass of 26,000. A minimal pPS10 replicon has been defined to a continuous 1267 base-pair region of pPS10 that includes the oriV and repA sequences.     

Increased Abundance of IncP-1β Plasmids and Mercury Resistance Genes in Mercury-Polluted River Sediments: First Discovery of IncP-1β Plasmids with a Complex mer Transposon as the Sole Accessory Element

Although it is generally assumed that mobile genetic elements facilitate the adaptation of microbial communities to environmental stresses, environmental data supporting this assumption are rare. In this study, river sediment samples taken from two mercury-polluted (A and B) and two nonpolluted or less-polluted (C and D) areas of the river Nura (Kazakhstan) were analyzed by PCR for the presence and abundance of mercury resistance genes and of broad-host-range plasmids. PCR-based detection revealed that mercury pollution corresponded to an increased abundance of mercury resistance genes and of IncP-1β replicon-specific sequences detected in total community DNA. The isolation of IncP-1β plasmids from contaminated sediments was attempted in order to determine whether they carry mercury resistance genes and thus contribute to an adaptation of bacterial populations to Hg pollution. We failed to detect IncP-1β plasmids in the genomic DNA of the cultured Hg-resistant bacterial isolates. However, without selection for mercury resistance, three different IncP-1β plasmids (pTP6, pTP7, and pTP8) were captured directly from contaminated sediment slurry in Cupriavidus necator JMP228 based on their ability to mobilize the IncQ plasmid pIE723. These plasmids hybridized with the merRTΔP probe and conferred Hg resistance to their host. A broad host range and high stability under conditions of nonselective growth were observed for pTP6 and pTP7. The full sequence of plasmid pTP6 was determined and revealed a backbone almost identical to that of the IncP-1β plasmids R751 and pB8. However, this is the first example of an IncP-1β plasmid which had acquired only a mercury resistance transposon but no antibiotic resistance or biodegradation genes. This transposon carries a rather complex set of mer genes and is inserted between Tra1 and Tra2.     

Plasmids related to RSF1010 from Bordetella bronchiseptica

Six out of 14 Bordetella bronchiseptica isolates from U.K. pigs each contained one plasmid, of 8.7-44 kb. All plasmid-containing isolates were sulfonamide resistant, and this property was shown to be plasmid-encoded. Five of the plasmids were related; two were indistinguishable from the broad-host-range plasmid, RSF1010. The other three, two of which appeared to be identical, were shown to have regions of homology with RSF1010. One of these regions encompassed the sulfonamide resistance determinant while the other contained oriV, which also determines plasmid incompatibility. None of the plasmids could be associated with virulence or phase variation, and it appears likely that they have been acquired in response to antibiotic pressure.     

Host-dependent requirement for specific DnaA boxes for plasmid RK2 replication

The replication origin of the broad-host-range plasmid RK2, oriV, contains four DnaA boxes, which bind the DnaA protein isolated from Escherichia coli. Using a transformation assay, mutational analysis of these boxes showed a differential requirement for replication in different Gram-negative bacteria. DnaA boxes 3 and 4 were required in E. coli and Pseudomonas putidabut not as strictly in Azotobacter vinelandii and not at all in P. aeruginosa. In vitro replication results using an extract prepared from E. coli demonstrated that the activity of origin derivatives containing mutations in boxes 3 or 4 or a deletion of all four DnaA boxes could be restored by the addition of increasing amounts of purified DnaA protein. High levels of DnaA protein in the presence of the TrfA protein also resulted in the stimulation of open complex formation and DnaB helicase loading on oriV, even in the absence of the four DnaA boxes. These observations at least raise the possibility that an alternative mechanism of initiation of oriV is being used in the absence of the four DnaA boxes and that this mechanism may be similar to that used in P. aeruginosa, which does not require these four DnaA boxes for replication.     

Analysis of nonpolar insertion mutations in the trfA gene of IncP plasmid RK2 which affect its broad-host-range property

Replication of broad-host-range plasmid RK2 requires the protein product(s) of the plasmid-encoded trfA gene to initiate replication at oriV, the vegetative replication origin. The trfA gene contains two translational starts which direct translation of two polypeptides, of 382 and 285 amino acids, which differ by the 97 amino acids at their N-terminus. Nonpolar insertions which abolish expression of the larger TrfA polypeptide but otherwise retain the trfA gene's normal expression signals severely reduce plasmid replication efficiency in Pseudomonas aeruginosa and to a lesser extent in Pseudomonas putida, but have very little effect in Escherichia coli. This indicates that the organization of the trfA gene, producing two polypeptides products, plays an important part in the broad-host-range of plasmid RK2 by providing a degree of flexibility in the way the plasmid's replication system interacts with host biochemistry.     

DnaA protein is required for replication of the minimal replicon of the broad-host-range plasmid RK2 in Escherichia coli.

The minimal origin of replication of the broad-host-range plasmid RK2 has two potential recognition sequences for the DnaA protein of Escherichia coli. DNA transfer by transformation into a dnaA-null mutant of E. coli showed that DnaA protein is needed for replication or maintenance of mini-RK2. We isolated and purified DnaA protein as a chimeric protein, covalently attached to a piece of collagen and beta-galactosidase. The hybrid protein specifically bound to restriction fragments from the oriV region of RK2, which contained the two dnaA boxes. Deletion of the second dnaA box inactivated the origin and abolished the binding of the hybrid protein to the DNA fragment that had suffered the deletion. When the second dnaA box was replaced with an EcoRI linker of identical length, origin activity was restored. Binding experiments showed that the linker provided a weak dnaA box. An alternative explanation was that the linker restored proper spacing between sequences on either side of the deleted box, thus restoring origin activity.