Effects of surfactant adsorption and biodegradability on the distribution of bacteria between sediments and water in a freshwater microcosm.

A microcosm containing resuspended river sediment was used to investigate the effect of anionic surfactants on the distribution of bacteria between planktonic and attached populations. Freshwater river sediment containing viable bacteria was preequilibrated in the microcosm, which was subsequently supplemented with biodegradable or recalcitrant surfactants and a non-surface-active carbon and energy source. Population dynamics of both free-living and attached bacteria were measured by epifluorescence microscopy with simultaneous analysis of the residual solution concentration of the xenobiotic carbon source. The addition of the readily biodegradable anionic surfactants sodium decyl sulfate and sodium dodecyl sulfate in separate experiments caused an increase in the number of attached bacteria and a concomitant decrease in the number of free-living bacteria. As biodegradation of the surfactants progressed, these trends reversed and the bacterial populations had returned to their preaddition values by the time when biodegradation was completed. In contrast, sodium tetradecyl sulfate or sodium dodecane sulfonate did not stimulate bacterial association with sediment, nor were they biodegraded in the microcosm. Sodium pyruvate, a non-surface-active carbon and energy source, was readily utilized but caused no bacterial attachment to the sediment. These results indicate that for an anionic surfactant to induce bacterial attachment to river sediment, it must be biodegradable. The bacterial attachment to the sediment appears to be reversible and may be dependent on the accumulation of the surfactant at the surface or as a result of alteration of the surface free energies.     

Effects of surfactant adsorption and biodegradability on the distribution of bacteria between sediments and water in a freshwater microcosm.

A microcosm containing resuspended river sediment was used to investigate the effect of anionic surfactants on the distribution of bacteria between planktonic and attached populations. Freshwater river sediment containing viable bacteria was preequilibrated in the microcosm, which was subsequently supplemented with biodegradable or recalcitrant surfactants and a non-surface-active carbon and energy source. Population dynamics of both free-living and attached bacteria were measured by epifluorescence microscopy with simultaneous analysis of the residual solution concentration of the xenobiotic carbon source. The addition of the readily biodegradable anionic surfactants sodium decyl sulfate and sodium dodecyl sulfate in separate experiments caused an increase in the number of attached bacteria and a concomitant decrease in the number of free-living bacteria. As biodegradation of the surfactants progressed, these trends reversed and the bacterial populations had returned to their preaddition values by the time when biodegradation was completed. In contrast, sodium tetradecyl sulfate or sodium dodecane sulfonate did not stimulate bacterial association with sediment, nor were they biodegraded in the microcosm. Sodium pyruvate, a non-surface-active carbon and energy source, was readily utilized but caused no bacterial attachment to the sediment. These results indicate that for an anionic surfactant to induce bacterial attachment to river sediment, it must be biodegradable. The bacterial attachment to the sediment appears to be reversible and may be dependent on the accumulation of the surfactant at the surface or as a result of alteration of the surface free energies.     

Bacteria biofilm encourages algal immigration onto substrata in lotic systems

I tested the effect of the density of attached bacteria on the amount of algal immigration in the early development of a periphyton community in an artificial stream by manipulating the density of the attached bacteria. Three densities were prepared by regulation of the incubation time. A suspension of algae was added to the stream, and the degree of algal attachment to substrata was compared among the treatments. Algal immigration was proportional to the density of attached bacteria on all substrata (glass, PVC, and slate), although density differed among substrata. Analysis of covariance (dependent variable, amount of attached algae; covariate, bacterial density) showed significant relationship between amounts of attached algae and bacterial densities, but did not show significant differences in the slopes and adjusted means among substrata. When acrylic beads were added with the suspension of attached algae, significant linear correlation was obtained between the amount of attached algae and the amount of acrylic beads on the substrata. Algal immigration was due to non-selective adsorption by attached bacterial biofilms on substrata, although the extent of bacterial colonization and biofilm formation may be affected by the substrata and other environmental factors (e.g., current conditions and water temperature).     

Bacterial colonization of particles: growth and interactions

Marine particles in the ocean are exposed to diverse bacterial communities, and colonization and growth of attached bacteria are important processes in the degradation and transformation of the particles. In an earlier study, we showed that the initial colonization of model particles by individual bacterial strains isolated from marine aggregates was a function of attachment and detachment. In the present study, we have investigated how this colonization process was further affected by growth and interspecific interactions among the bacteria. Long-term incubation experiments showed that growth dominated over attachment and detachment after a few hours in controlling the bacterial population density on agar particles. In the absence of grazing mortality, this growth led to an equilibrium population density consistent with the theoretical limit due to oxygen diffusion. Interspecific interaction experiments showed that the presence of some bacterial strains ("residents") on the agar particles either increased or decreased the colonization rate of other strains ("newcomers"). Comparison between an antibiotic-producing strain and its antibiotic-free mutant showed no inhibitory effect on the newcomers due to antibiotic production. On the contrary, hydrolytic activity of the antibiotic-producing strain appeared to benefit the newcomers and enhance their colonization rate. These results show that growth- and species-specific interactions have to be taken into account to adequately describe bacterial colonization of marine particles. Changes in colonization pattern due to such small-scale processes may have profound effects on the transformation and fluxes of particulate matter in the ocean.     

Effect of bovine manure on fecal coliform attachment to soil and soil particles of different sizes

Manure-borne bacteria can be transported in runoff as free cells, cells attached to soil particles, and cells attached to manure particles. The objectives of this work were to compare the attachment of fecal coliforms (FC) to different soils and soil fractions and to assess the effect of bovine manure on FC attachment to soil and soil fractions. Three sand fractions of different sizes, the silt fraction, and the clay fraction of loam and sandy clay loam soils were separated and used along with soil samples in batch attachment experiments with water-FC suspensions and water-manure-FC suspensions. In the absence of manure colloids, bacterial attachment to soil, silt, and clay particles was much higher than the attachment to sand particles having no organic coating. The attachment to the coated sand particles was similar to the attachment to silt and clay. Manure colloids in suspensions decreased bacterial attachment to soils, clay and silt fractions, and coated sand fractions, but did not decrease the attachment to sand fractions without the coating. The low attachment of bacteria to silt and clay particles in the presence of manure colloids may cause predominantly free-cell transport of manure-borne FC in runoff.     

Effect of Bovine Manure on Fecal Coliform Attachment to Soil and Soil Particles of Different Sizes

Manure-borne bacteria can be transported in runoff as free cells, cells attached to soil particles, and cells attached to manure particles. The objectives of this work were to compare the attachment of fecal coliforms (FC) to different soils and soil fractions and to assess the effect of bovine manure on FC attachment to soil and soil fractions. Three sand fractions of different sizes, the silt fraction, and the clay fraction of loam and sandy clay loam soils were separated and used along with soil samples in batch attachment experiments with water-FC suspensions and water-manure-FC suspensions. In the absence of manure colloids, bacterial attachment to soil, silt, and clay particles was much higher than the attachment to sand particles having no organic coating. The attachment to the coated sand particles was similar to the attachment to silt and clay. Manure colloids in suspensions decreased bacterial attachment to soils, clay and silt fractions, and coated sand fractions, but did not decrease the attachment to sand fractions without the coating. The low attachment of bacteria to silt and clay particles in the presence of manure colloids may cause predominantly free-cell transport of manure-borne FC in runoff.     

Structure and Dynamics of Anaerobic Bacterial Aggregates in a Gas-Lift Reactor

Anaerobic mixed-culture aggregates, which converted glucose to acetic, propionic, butyric, and valeric acids, were formed under controlled conditions of substrate feed (carbon limitation) and hydraulic regimen. The continuous-flow system used (anaerobic gas-lift reactor) was designed to retain bacterial aggregates in a well-mixed reactor. Carrier availability (i.e., liquid-suspended sand grains) proved necessary for bacterial aggregate formation from individual cells during reactor start-up. Electron microscopic examination revealed that incipient colonization of sand grains by bacteria from the bulk liquid occurred in surface irregularities, conceivably reflecting local quiescence. Subsequent confluent biofilm formation on sand grains proved to be unstable, however. Substrate depletion in the bulk liquid is assumed to weaken deeper parts of the biofilm due to cellular lysis, after which production of gas bubbles and liquid shearing forces cause sloughing. The resulting fragments, although sand free, were nevertheless large enough to be retained in the reactor and gradually grew larger through bacterial growth and by clumping together with other fragments. In the final steady state, high cell densities were maintained in the form of aggregates, while sand had virtually disappeared due to sampling losses and wash-out. Numerical cell densities within aggregates ranged from 10¹²/ml at the periphery to very low values in the center. The cells were enmeshed in a polymer matrix containing polysaccharides; nevertheless, carbon sufficiency was not a prerequisite to sustain high hold-up ratios.     

Bacterial attachment to stainless steel welds: Significance of substratum microstructure

AISI Type 304 L stainless steel (SS) is a widely used material in industry due to its strength and resistance to corrosion. However, corrosion on SS is reported largely at welds or adjacent areas. Bacteria were observed to colonize preferentially near welds as a result of surface roughness. In the present study, the influence of another important metal surface condition on bacterial adhesion has been evaluated, i.e. substratum microstructure. Type 304 L SS weld samples were prepared and machined to separate weld metal, the heat affected zone (HAZ) and base metal regions. The coupons were molded in resin so that only the surfaces polished to a 3 p.m finish were exposed to the experimental medium with Pseudomonas sp. isolated from a corrosive environment in Japan. The coupons were exposed for varying durations. The area of bacterial attachment showed significant differences with time of exposure and; the type of coupons. Generally, the weld metal samples showed more attachment whilst the base metal showed the least. The area of attachment was inversely proportional to the average grain size of the three samples. As the bacteria started colonizing, attachment mainly occurred on the grain boundaries of the base metal (after 8h, 84.62% and 15.38% of the total number of bacteria attached in the field of view (FOV) at the grain boundary and matrix, respectively) and on the austenite‐ferrite interface in the weld metal (after 8h, 88.33% and 11.77% of the total number of bacteria attached in the FOV at the boundary and matrix, respectively). The weld area had more grains and hence more grain boundary/ unit area than the base metal, resulting in more bacterial attachment. SEM observations showed this increased attachment of Pseudomonas sp. resulted in the initiation of microbiologically influenced corrosion (MIC) on the weld coupons by 16 d. Therefore, the results provide data to support the fact that substratum microstructure influences bacterial attachment, which in turn leads to corrosion.     

Structural and Chemical Characterization of Placer Gold Grains: Implications for Bacterial Contributions to Grain Formation

Gold grains collected from the Rio Saldaña River, Colombia were hundreds of micrometers in size and discoid-ellipse in shape. Fourteen of 63 grains contained an iron oxyhydroxide coating that occurred as ca. 50 to 100 nm thick lamina while thicker coatings were comprised of colloids 200 nm to 4 μm in diameter. Bacterial-size casts were observed throughout the thicker iron oxyhydroxide coating and intuitively represent relic impressions of bacterial cells. The surface textures of gold grains were generally smooth with surficial depressions or crevices containing detrital material colonized by bacteria. Focus Ion Beam (FIB) milled cross-sections demonstrated that the detrital material contained nanophase gold particles. Biofilm attached to this detrital material contained ca. 2 to 3 nm colloidal gold attached to exopolymeric substances. Cross sections of grains revealed solid cores with vesicular voids near the grain edge including a bacterial-size cast interpreted to be a permineralized bacterial cell. Synchrotron-based elemental mapping indicated that grains contained heterogenously distributed Ag and Cu. While strong Ag and Cu signals (relative to Au) were detected in the core, a stronger Au signal occurred at the edge of grains demonstrating enriched rims of secondary gold. The preservation of bacterial casts and biofilms associated with secondary gold structures at the surface of grains suggest that bacteria may contribute to gold enrichment and growth in this placer environment. Bacteria, occurring on the surface of 13 of 25 gold grains, were enriched by “inoculating” individual grains into separate test tubes containing R2B growth medium. Enriched growth of bacteria on gold grain surfaces demonstrated preferential attachment onto detrital material within creviced regions. The dominant bacteria from these enrichments were transferred to solid R2A medium to obtain pure isolates. The isolates were identified as one of four bacterial species: Nitrobacter sp. 263, Shewanella sp. YM-8, Sediminibacterium sp. B2-10-2 and sp. I-32 based on 16S ribosomal DNA sequencing.     

Bacterial Colonization of Particles: Growth and Interactions

Marine particles in the ocean are exposed to diverse bacterial communities, and colonization and growth of attached bacteria are important processes in the degradation and transformation of the particles. In an earlier study, we showed that the initial colonization of model particles by individual bacterial strains isolated from marine aggregates was a function of attachment and detachment. In the present study, we have investigated how this colonization process was further affected by growth and interspecific interactions among the bacteria. Long-term incubation experiments showed that growth dominated over attachment and detachment after a few hours in controlling the bacterial population density on agar particles. In the absence of grazing mortality, this growth led to an equilibrium population density consistent with the theoretical limit due to oxygen diffusion. Interspecific interaction experiments showed that the presence of some bacterial strains (“residents”) on the agar particles either increased or decreased the colonization rate of other strains (“newcomers”). Comparison between an antibiotic-producing strain and its antibiotic-free mutant showed no inhibitory effect on the newcomers due to antibiotic production. On the contrary, hydrolytic activity of the antibiotic-producing strain appeared to benefit the newcomers and enhance their colonization rate. These results show that growth- and species-specific interactions have to be taken into account to adequately describe bacterial colonization of marine particles. Changes in colonization pattern due to such small-scale processes may have profound effects on the transformation and fluxes of particulate matter in the ocean.     

Dynamics of microbial communities on marine snow aggregates: colonization,growth, detachment,and grazing mortality of attached bacteria

We studied the dynamics of microbial communities attached to model aggregates (4-mm-diameter agar spheres) and the component processes of colonization, detachment, growth, and grazing mortality. Agar spheres incubated in raw seawater were rapidly colonized by bacteria, followed by flagellates and ciliates. Colonization can be described as a diffusion process, and encounter volume rates were estimated at about 0.01 and 0.1 cm(3) h(-1) for bacteria and flagellates, respectively. After initial colonization, the abundances of flagellates and ciliates remained approximately constant at 10(3) to 10(4) and approximately 10(2) cells sphere(-1), respectively, whereas bacterial populations increased at a declining rate to >10(7) cells sphere(-1). Attached microorganisms initially detached at high specific rates of approximately 10(-2) min(-1), but the bacteria gradually became irreversibly attached to the spheres. Bacterial growth (0 to 2 day(-1)) was density dependent and declined hyperbolically when cell density exceeded a threshold. Bacterivorous flagellates grazed on the sphere surface at an average saturated rate of 15 bacteria flagellate(-1) h(-1). At low bacterial densities, the flagellate surface clearance rate was approximately 5 x 10(-7) cm(2) min(-1), but it declined hyperbolically with increasing bacterial density. Using the experimentally estimated process rates and integrating the component processes in a simple model reproduces the main features of the observed microbial population dynamics. Differences between observed and predicted population dynamics suggest, however, that other factors, e.g., antagonistic interactions between bacteria, are of importance in shaping marine snow microbial communities.     

Development of radiographic and microscopic techniques for the characterization of bacterial transport in intact sediment cores from Oyster, Virginia.

The objective of this study was to ascertain the physical and mineralogical properties responsible for the retention of bacteria in subsurface sediments. The sediment core chosen for this study was a fine-grained, quartz-rich sand with minor amounts of Fe and Al hydroxides. A bacterial transport experiment was performed using an intact core collected from a recent excavation of the Butler's Bluff member of the Nassawadox formation in the borrow pit at Oyster, VA. and a 14C-labeled bacterial strain OYS2-A was selected for its relatively low adhesion. After the bacterial breakthrough was observed in the effluent, the intact core was dissected to determine the internal distribution of the injected bacteria retained in the sediment. The sediment was dried, epoxy fixed, and thin sectioned. The distribution of 14C activity in the thin sections was mapped using a phosphor screen and X-ray film. The remainder of the core was subsampled and the 14C activity of the subsamples was determined by liquid scintillation counting. The phosphor imaging technique was capable of directly imaging the distribution of radiolabeled bacteria in thin sections, because of its high sensitivity and linear response over a large activity range. The phosphor imaging signal intensity was utilized as a measure of bacterial concentration. The distribution of bacteria at the millimeter scale in the thin sections was compared to the grain size, porosity, and mineralogy as measured by scanning electron microscopy (SEM) and energy dispersive spectrum (EDS) analyses. No apparent correlation was observed between the retention or collision efficiency of bacteria in the sediment and the amount of Fe and Al hydroxides. This apparent lack of correlation can be qualitatively explained by combination of several factors including a nearly neutral surface charge of the bacterial strain, and texture of the Fe and Al hydroxides in the sediment. The combination of phosphor imaging with SEM-EDS proved to be a robust method for relating the physical and mineralogical microscopic properties of poorly indurated sediment to the distribution of adsorbed bacteria, allowing bacterial retention mechanisms to be unambiguously unraveled.     

Microbial communities colonising nutrient-enriched marine sediment

Sediment cores were set up to study microbial colonisation and interactions on marine sand grains under enrichment conditions. Cores were enriched with photosynthetic media in the light and dark (PL, PD) and heterotrophic media in the light and dark (HL, HD), and were incubated for 25 days. Sediment chlorophylls were then measured by acetone extraction, viable heterotrophic bacteria by plate counts, and numbers of cells mm^–2 sand grain surface by s.e.m. Chlorophyll a occurred in all sediments but was highest in the PL sediment. Bacteriochlorophyll a was only observed in the HL sediment. Heterotrophic viable counts were high in the HL and HD sediments. Dense growth of diatoms and blue-green algae, and a marine fungal Thraustochytrid sp. occurred on PL grains. The blue-green alga Schizothrix was often associated with the diatom Amphora on PL grains. Many different bacteria grew on HL and HD grains and some unusual colony and cell morphologies were recorded (Caulobacter, Flexibacter, polymer strands). Characteristic flakey material sometimes occurred in hollows on grains. The results are discussed in relation to microbial communities in low energy sedimentary environments.     

Behavior ofPseudomonas fluorescens within the hydrodynamic boundary layers of surface microenvironments

Phase, darkfield, and computer-enhanced microscopy were used to observe the surface microenvironment of flow cells during bacterial colonization. Microbial behavior was consistent with the assumptions used previously to derive surface colonization kinetics and to calculate surface growth and attachment rates from cell number and distribution. Surface microcolonies consisted of closely packed cells. Each colony contained 2ⁿ cells, where n is the number of cell divisions following attachment. Initially, cells were freely motile while attached, performing circular looping movements within the plane of the solid-liquid interface. Subsequently, cells attached apically, maintained a fixed position on the surface, and rotated. This type of attachment was reversible and did not necessarily lead to the formation of microcolonies. Cells became irreversibly attached by progressing from apical to longitudinal attachment. Longitudinally attached cells increased in length, then divided, separated, moved apart laterally, and slid next to one another. This resulted in tight cell packing and permitted simultaneous growth and adherence. After approximately 4 generations, individual cells emigrated from developing microcolonies to recolonize the surface at new locations. Surface colonization byPseudomonas fluorescens can thus be subdivided into the following sequential colonization phases: motile attachment phase, reversible attachment phase, irreversible attachment phase, growth phase, and recolonization phase.     

Bacterial transport through porous solids: interactions betweenMicrococcus luteus cells and sand particles

Summary As part of an evaluation of microbial systems for potential application in enhanced oil recovery (EOR) in situ, the behaviour of bacteria within the labyrinths of porous structures was investigated. Sandpacks were utilised as models of reservoir formations. UsingMicrococcus luteus (NCIB 8553) cells under non-growing conditions, the interaction between the bacteria and sand particles was investigated by a simple shake flask system. The attachment of bacterial cells to sand was time-dependent and reversible. With increasing density of cell suspensions, competivive effects on binding to sand were observed, indicating a possible interaction between two subpopulations of cells. Similar effects occurred when suspensions ofM. luteus cells were pumped through sandpacks. Shake flask experiments indicated that the maximum binding of bacteria to sand was about 2×10⁹ cells · g^–1, representing a total coverage of approximately 20% of the surface of sand particles by bacterial cells.     

Phagocytosis of bacteria by polymorphonuclear leukocytes: a freeze-fracture, scanning electron microscope, and thin-section investigation of membrane structure

The changes in membrane structure of rabbit polymorphonuclear (PMN) leukocytes during bacterial phagocytosis was investigated with scanning electron microscope (SEM), thin-section, and freeze-fracture techniques. SEM observations of bacterial attachment sites showed the involvement of limited areas of PMN membrane surface (0.01-0.25μm(2)). Frequently, these areas of attachment were located on membrane extensions. The membrane extensions were present before, during, and after the engulfment of bacteria, but were diminished in size after bacterial engulfment. In general, the results obtained with SEM and thin-section techniques aided in the interpretation of the three-dimensional freeze-fracture replicas. Freeze-fracture results revealed the PMN leukocytes had two fracture faces as determined by the relative density of intramembranous particles (IMP). Membranous extensions of the plasma membrane, lysosomes, and phagocytic vacuoles contained IMP's with a distribution and density similar to those of the plasma membrane. During phagocytosis, IMPs within the plasma membrane did not undergo a massive aggregation. In fact, structural changes within the membranes were infrequent and localized to regions such as the attachment sites of bacteria, the fusion sites on the plasma membrane, and small scale changes in the phagocytic vacuole membrane during membrane fusion. During the formation of the phagocytic vacuole, the IMPs of the plasma membrane appeared to move in with the lipid bilayer while maintaining a distribution and density of IMPs similar to those of the plasma membranes. Occasionally, IMPs were aligned to linear arrays within phagocytic vacuole membranes. This alignment might be due to an interaction with linearly arranged motile structures on the side of the phagocytic vacuole membranes. IMP-free regions were observed after fusion of lysosomes with the phagocytic vacuoles or plasma membrane. These IMP-free areas probably represent sites where membrane fusion occurred between lysosomal membrane and phagocytic vacuole membrane or plasma membrane. Highly symmetrical patterns of IMPs were not observed during lysosomal membrane fusion.     

Immobilization of bacteria on polymer matrices for degradation of crude oil and oil products

Organic polymer materials (OPM) differing in sets of functional groups, fiber surface thickness and character, and density of fiber packing in fabric were synthesized. OPM were studied for assessing the possibility of their application as sorbents for oil spills in water bodies. The synthesized OPM were used for the creation of bio-hybrid materials as matrices for immobilization of bacteria of the genus Rhodococcus sp. capable of petroleum degradation. Actively dividing bacterial cells forming clusters were shown to be present at the surface of fibers. Active attachment of the cells to polymeric surface due to intrusion and/or excretion of extracellular biopolymeric matrix were detected. The modification of polymer sorbents was shown to influence bacterial immobilization. The peculiarity of growth and the specificity of cell morphology of bacterial culture were noted.     

The effect of cellulose overproduction on binding and biofilm formation on roots by Agrobacterium tumefaciens

Agrobacterium tumefaciens growing in liquid attaches to the surface of tomato and Arabidopsis thaliana roots, forming a biofilm. The bacteria also colonize roots grown in sterile quartz sand. Attachment, root colonization, and biofilm formation all were markedly reduced in celA and chvB mutants, deficient in production of cellulose and cyclic beta-(1,2)-D-glucans, respectively. We have identified two genes (celG and cell) in which mutations result in the overproduction of cellulose as judged by chemical fractionation and methylation analysis. Wild-type and chvB mutant strains carrying a cDNA clone of a cellulose synthase gene from the marine urochordate Ciona savignyi also overproduced cellulose. The overproduction in a wild-type strain resulted in increased biofilm formation on roots, as evaluated by light microscopy, and levels of root colonization intermediate between those of cellulose-minus mutants and the wild type. Overproduction of cellulose by a nonattaching chvB mutant restored biofilm formation and bacterial attachment in microscopic and viable cell count assays and partially restored root colonization. Although attachment to plant surfaces was restored, overproduction of cellulose did not restore virulence in the chvB mutant strain, suggesting that simple bacterial binding to plant surfaces is not sufficient for pathogenesis.     

Influence of Substratum Characteristics on the Attachment of a Marine Pseudomonad to Solid Surfaces

The attachment of a marine Pseudomonas sp. to a variety of surfaces was investigated, and the number of bacteria which became attached was related to the surface charge and degree of hydrophobicity of the substratum. Large numbers of bacteria attached to hydrophobic plastics with little or no surface charge [Teflon, polyethylene, polystyrene, poly(ethylene terephthalate)]; moderate numbers attached to hydrophilic metals with a positive (platinum) or neutral (germanium) surface charge; and very few attached to hydrophilic, negatively charged substrata (glass, mica, oxidized plastics). The results suggest that both electrostatic and hydrophobic interactions are involved in bacterial attachment.     

The Effect of Cultural Procedures on the Attachment of Bacteria to Chicken Breast Meat

Various bacterial strains were cultured in a laboratory medium, on chicken breast meat or derived from faeces of orally infected chicks. Suspensions of these bacterial cultures were brought in contact with chicken breast meat. The way in which the bacteria were cultured had little influence on the number of bacteria which attached to the chicken breast meat surface or on as the strength of attachment ( i.e. the easiness of removal of attached bacteria). Only bacteria from the faeces of freshly infected chicks (24 h after inoculation) attached in higher numbers (more than one log₁₀ unit) and these were less easy to remove.